| Message ID | 20240906080928.710051-1-thuth@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | target/riscv/cpu_helper: Fix linking problem with semihosting disabled | expand |
On Fri, 6 Sept 2024 at 09:09, Thomas Huth <thuth@redhat.com> wrote: > > When QEMU has been configured with "--without-default-devices", the build > is currently failing with: > > /usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o: > in function `riscv_cpu_do_interrupt': > .../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined > reference to `do_common_semihosting' > > Avoid calling into do_common_semihosting() if the corresponding Kconfig > switch has not been set. This would be inconsistent with Arm, where you always get semihosting if you're using TCG. (For KVM, semihosting is up to the kernel to provide, which is why we don't want the code in that case.) > Signed-off-by: Thomas Huth <thuth@redhat.com> > --- > target/riscv/cpu_helper.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c > index 395a1d9140..c7a6569e2d 100644 > --- a/target/riscv/cpu_helper.c > +++ b/target/riscv/cpu_helper.c > @@ -34,6 +34,10 @@ > #include "debug.h" > #include "tcg/oversized-guest.h" > > +#ifndef CONFIG_USER_ONLY > +#include CONFIG_DEVICES > +#endif > + > int riscv_env_mmu_index(CPURISCVState *env, bool ifetch) > { > #ifdef CONFIG_USER_ONLY > @@ -1674,10 +1678,12 @@ void riscv_cpu_do_interrupt(CPUState *cs) > if (!async) { > /* set tval to badaddr for traps with address information */ > switch (cause) { > +#ifdef CONFIG_ARM_COMPATIBLE_SEMIHOSTING > case RISCV_EXCP_SEMIHOST: > do_common_semihosting(cs); > env->pc += 4; > return; > +#endif > case RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT: > case RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT: > case RISCV_EXCP_LOAD_ADDR_MIS: If you do want to do this thhen this isn't sufficient, because you would also need to change the code that generates the RISCV_EXCP_SEMIHOST exception so that it instead generates the "behave as if we don't have semihosting and the semihosting-trap instruction sequence were executed "normally". But I think the best thing is to use "select if TCG" in the Kconfig. thanks -- PMM
On 06/09/2024 10.58, Peter Maydell wrote: > On Fri, 6 Sept 2024 at 09:09, Thomas Huth <thuth@redhat.com> wrote: >> >> When QEMU has been configured with "--without-default-devices", the build >> is currently failing with: >> >> /usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o: >> in function `riscv_cpu_do_interrupt': >> .../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined >> reference to `do_common_semihosting' >> >> Avoid calling into do_common_semihosting() if the corresponding Kconfig >> switch has not been set. > > This would be inconsistent with Arm, where you always > get semihosting if you're using TCG. (For KVM, semihosting > is up to the kernel to provide, which is why we don't > want the code in that case.) > >> Signed-off-by: Thomas Huth <thuth@redhat.com> >> --- >> target/riscv/cpu_helper.c | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c >> index 395a1d9140..c7a6569e2d 100644 >> --- a/target/riscv/cpu_helper.c >> +++ b/target/riscv/cpu_helper.c >> @@ -34,6 +34,10 @@ >> #include "debug.h" >> #include "tcg/oversized-guest.h" >> >> +#ifndef CONFIG_USER_ONLY >> +#include CONFIG_DEVICES >> +#endif >> + >> int riscv_env_mmu_index(CPURISCVState *env, bool ifetch) >> { >> #ifdef CONFIG_USER_ONLY >> @@ -1674,10 +1678,12 @@ void riscv_cpu_do_interrupt(CPUState *cs) >> if (!async) { >> /* set tval to badaddr for traps with address information */ >> switch (cause) { >> +#ifdef CONFIG_ARM_COMPATIBLE_SEMIHOSTING >> case RISCV_EXCP_SEMIHOST: >> do_common_semihosting(cs); >> env->pc += 4; >> return; >> +#endif >> case RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT: >> case RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT: >> case RISCV_EXCP_LOAD_ADDR_MIS: > > If you do want to do this thhen this isn't sufficient, because > you would also need to change the code that generates the > RISCV_EXCP_SEMIHOST exception so that it instead generates > the "behave as if we don't have semihosting and the > semihosting-trap instruction sequence were executed "normally". > But I think the best thing is to use "select if TCG" in the Kconfig. Ok, but I think we then still need a #ifdef CONFIG_TCG here, otherwise linking will fail for KVM-only builds? Thomas
On Fri, 6 Sept 2024 at 10:30, Thomas Huth <thuth@redhat.com> wrote: > > On 06/09/2024 10.58, Peter Maydell wrote: > > On Fri, 6 Sept 2024 at 09:09, Thomas Huth <thuth@redhat.com> wrote: > >> > >> When QEMU has been configured with "--without-default-devices", the build > >> is currently failing with: > >> > >> /usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o: > >> in function `riscv_cpu_do_interrupt': > >> .../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined > >> reference to `do_common_semihosting' > >> > >> Avoid calling into do_common_semihosting() if the corresponding Kconfig > >> switch has not been set. > > > > This would be inconsistent with Arm, where you always > > get semihosting if you're using TCG. (For KVM, semihosting > > is up to the kernel to provide, which is why we don't > > want the code in that case.) > > If you do want to do this thhen this isn't sufficient, because > > you would also need to change the code that generates the > > RISCV_EXCP_SEMIHOST exception so that it instead generates > > the "behave as if we don't have semihosting and the > > semihosting-trap instruction sequence were executed "normally". > > But I think the best thing is to use "select if TCG" in the Kconfig. > > Ok, but I think we then still need a #ifdef CONFIG_TCG here, otherwise > linking will fail for KVM-only builds? Yes, I expect so -- the equivalent code in target/arm is wrapped in #ifdef CONFIG_TCG. -- PMM
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c index 395a1d9140..c7a6569e2d 100644 --- a/target/riscv/cpu_helper.c +++ b/target/riscv/cpu_helper.c @@ -34,6 +34,10 @@ #include "debug.h" #include "tcg/oversized-guest.h" +#ifndef CONFIG_USER_ONLY +#include CONFIG_DEVICES +#endif + int riscv_env_mmu_index(CPURISCVState *env, bool ifetch) { #ifdef CONFIG_USER_ONLY @@ -1674,10 +1678,12 @@ void riscv_cpu_do_interrupt(CPUState *cs) if (!async) { /* set tval to badaddr for traps with address information */ switch (cause) { +#ifdef CONFIG_ARM_COMPATIBLE_SEMIHOSTING case RISCV_EXCP_SEMIHOST: do_common_semihosting(cs); env->pc += 4; return; +#endif case RISCV_EXCP_LOAD_GUEST_ACCESS_FAULT: case RISCV_EXCP_STORE_GUEST_AMO_ACCESS_FAULT: case RISCV_EXCP_LOAD_ADDR_MIS:
When QEMU has been configured with "--without-default-devices", the build is currently failing with: /usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o: in function `riscv_cpu_do_interrupt': .../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined reference to `do_common_semihosting' Avoid calling into do_common_semihosting() if the corresponding Kconfig switch has not been set. Signed-off-by: Thomas Huth <thuth@redhat.com> --- target/riscv/cpu_helper.c | 6 ++++++ 1 file changed, 6 insertions(+)