@@ -25,11 +25,12 @@
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ad7877.h>
#include <linux/module.h>
#include <asm/irq.h>
@@ -174,6 +175,8 @@ struct ad7877 {
u8 averaging;
u8 pen_down_acc_interval;
+ struct touchscreen_properties prop;
+
struct spi_transfer xfer[AD7877_NR_SENSE + 2];
struct spi_message msg;
@@ -353,8 +356,7 @@ static int ad7877_process_data(struct ad7877 *ts)
if (!timer_pending(&ts->timer))
input_report_key(input_dev, BTN_TOUCH, 1);
- input_report_abs(input_dev, ABS_X, x);
- input_report_abs(input_dev, ABS_Y, y);
+ touchscreen_report_pos(input_dev, &ts->prop, x, y, false);
input_report_abs(input_dev, ABS_PRESSURE, Rt);
input_sync(input_dev);
@@ -667,11 +669,118 @@ static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
}
}
+static int ad7877_parse_props(struct ad7877 *ts)
+{
+ struct device *dev = &ts->spi->dev;
+ u32 value, average;
+ int ret;
+
+ ts->model = (uintptr_t)device_get_match_data(dev);
+ if (!ts->model)
+ ts->model = 7877;
+
+ ret = device_property_match_string(dev, "adi,stopacq-polarity", "low");
+ if (ret < 0) {
+ ret = device_property_match_string(dev, "adi,stopacq-polarity", "high");
+ if (ret < 0)
+ ts->stopacq_polarity = 0;
+ ts->stopacq_polarity = 1;
+ } else {
+ ts->stopacq_polarity = 0;
+ }
+
+ ret = device_property_read_u32(dev, "adi,first-conv-delay-ns", &value);
+ if (!ret) {
+ switch (value) {
+ case 500:
+ ts->first_conversion_delay = 0;
+ break;
+ case 128000:
+ ts->first_conversion_delay = 1;
+ break;
+ case 1000000:
+ ts->first_conversion_delay = 2;
+ break;
+ case 8000000:
+ ts->first_conversion_delay = 3;
+ break;
+ default:
+ return dev_err_probe(dev, -EINVAL,
+ "Invalid adi,first-conv-delay-ns value\n");
+ }
+ }
+
+ device_property_read_u32(dev, "adi,pen-down-acc-interval",
+ &value);
+ ts->pen_down_acc_interval = (u8)value;
+
+ ret = device_property_read_u32(dev, "adi,acquisition-time-us", &value);
+ if (!ret) {
+ switch (value) {
+ case 2:
+ ts->acquisition_time = 0;
+ break;
+ case 4:
+ ts->acquisition_time = 1;
+ break;
+ case 8:
+ ts->acquisition_time = 2;
+ break;
+ case 16:
+ ts->acquisition_time = 3;
+ break;
+ default:
+ return dev_err_probe(dev, -EINVAL,
+ "Invalid adi,first-conv-delay-ns value\n");
+ }
+ }
+
+ device_property_read_u32(dev, "adi,vref-delay-us",
+ &value);
+ if (!value)
+ ts->vref_delay_usecs = 100;
+ else
+ ts->vref_delay_usecs = (u16)value;
+
+ device_property_read_u32(dev, "touchscreen-x-plate-ohms", &value);
+ if (value)
+ ts->x_plate_ohms = (u16)value;
+ else
+ ts->x_plate_ohms = 400;
+
+ /*
+ * The property is parsed also in the touchscreen_parse_properties()
+ * but is required for the ad7877_process_data() so we need to store it.
+ */
+ device_property_read_u32(dev, "touchscreen-max-pressure", &value);
+ ts->pressure_max = (u16)value;
+
+ device_property_read_u32(dev, "touchscreen-average-samples", &average);
+ switch (average) {
+ case 1:
+ ts->averaging = 0;
+ break;
+ case 4:
+ ts->averaging = 1;
+ break;
+ case 8:
+ ts->averaging = 2;
+ break;
+ case 16:
+ ts->averaging = 3;
+ break;
+ default:
+ return dev_err_probe(dev, -EINVAL,
+ "touchscreen-average-samples must be 1, 4, 8, or 16\n");
+ }
+
+ return 0;
+}
+
static int ad7877_probe(struct spi_device *spi)
{
struct ad7877 *ts;
struct input_dev *input_dev;
- struct ad7877_platform_data *pdata = dev_get_platdata(&spi->dev);
int err;
u16 verify;
@@ -680,11 +789,6 @@ static int ad7877_probe(struct spi_device *spi)
return -ENODEV;
}
- if (!pdata) {
- dev_dbg(&spi->dev, "no platform data?\n");
- return -ENODEV;
- }
-
/* don't exceed max specified SPI CLK frequency */
if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz);
@@ -714,27 +818,22 @@ static int ad7877_probe(struct spi_device *spi)
ts->spi = spi;
ts->input = input_dev;
+ err = ad7877_parse_props(ts);
+ if (err)
+ return err;
+
timer_setup(&ts->timer, ad7877_timer, 0);
mutex_init(&ts->mutex);
spin_lock_init(&ts->lock);
- ts->model = pdata->model ? : 7877;
- ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
- ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
- ts->pressure_max = pdata->pressure_max ? : ~0;
-
- ts->stopacq_polarity = pdata->stopacq_polarity;
- ts->first_conversion_delay = pdata->first_conversion_delay;
- ts->acquisition_time = pdata->acquisition_time;
- ts->averaging = pdata->averaging;
- ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
-
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
input_dev->name = "AD7877 Touchscreen";
input_dev->phys = ts->phys;
input_dev->dev.parent = &spi->dev;
+ touchscreen_parse_properties(ts->input, false, &ts->prop);
+
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(EV_ABS, input_dev->evbit);
@@ -742,17 +841,6 @@ static int ad7877_probe(struct spi_device *spi)
__set_bit(ABS_Y, input_dev->absbit);
__set_bit(ABS_PRESSURE, input_dev->absbit);
- input_set_abs_params(input_dev, ABS_X,
- pdata->x_min ? : 0,
- pdata->x_max ? : MAX_12BIT,
- 0, 0);
- input_set_abs_params(input_dev, ABS_Y,
- pdata->y_min ? : 0,
- pdata->y_max ? : MAX_12BIT,
- 0, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE,
- pdata->pressure_min, pdata->pressure_max, 0, 0);
-
ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE);
verify = ad7877_read(spi, AD7877_REG_SEQ1);
deleted file mode 100644
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/spi/ad7877.h */
-
-/* Touchscreen characteristics vary between boards and models. The
- * platform_data for the device's "struct device" holds this information.
- *
- * It's OK if the min/max values are zero.
- */
-struct ad7877_platform_data {
- u16 model; /* 7877 */
- u16 vref_delay_usecs; /* 0 for external vref; etc */
- u16 x_plate_ohms;
- u16 y_plate_ohms;
-
- u16 x_min, x_max;
- u16 y_min, y_max;
- u16 pressure_min, pressure_max;
-
- u8 stopacq_polarity; /* 1 = Active HIGH, 0 = Active LOW */
- u8 first_conversion_delay; /* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */
- u8 acquisition_time; /* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
- u8 averaging; /* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */
- u8 pen_down_acc_interval; /* 0 = covert once, 1 = every 0.5 ms,
- 2 = ever 1 ms, 3 = every 8 ms,*/
-};
Add devicetree support within the driver. Remove old platform data approach since it is no longer used. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> --- changes in v3: - remove platform data instead of making it optional, as suggested. - use touchscreen_parse_properties and touchscreen_report_pos drivers/input/touchscreen/ad7877.c | 150 +++++++++++++++++++++++------ include/linux/spi/ad7877.h | 25 ----- 2 files changed, 119 insertions(+), 56 deletions(-) delete mode 100644 include/linux/spi/ad7877.h