| Message ID | 20240904171209.29120-4-quic_rlaggysh@quicinc.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add EPSS L3 provider support on SA8775P SoC | expand |
On 04/09/2024 19:12, Raviteja Laggyshetty wrote: > + > static const struct qcom_osm_l3_desc epss_l3_l3_vote = { > .nodes = epss_l3_nodes, > .num_nodes = ARRAY_SIZE(epss_l3_nodes), > @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { > { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, > { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, > { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, > + { .compatible = "qcom,sa8775p-epss-l3-cl0", > + .data = &epss_l3_perf_state }, Don't grow it but express compatibility. Best regards, Krzysztof
On 06/09/2024 17:32, Raviteja Laggyshetty wrote: > > On 9/4/2024 11:52 PM, Krzysztof Kozlowski wrote: >> On 04/09/2024 19:12, Raviteja Laggyshetty wrote: >>> + >>> static const struct qcom_osm_l3_desc epss_l3_l3_vote = { >>> .nodes = epss_l3_nodes, >>> .num_nodes = ARRAY_SIZE(epss_l3_nodes), >>> @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { >>> { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, >>> { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, >>> { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, >>> + { .compatible = "qcom,sa8775p-epss-l3-cl0", >>> + .data = &epss_l3_perf_state }, >> Don't grow it but express compatibility. > ok. Will rename compatible from "qcom,sa8775p-epss-l3-cl0" to "qcom,sa8775p-epss-l3". This won't solve the problem. You still grow the table, right? Best regards, Krzysztof
On 4.09.2024 7:12 PM, Raviteja Laggyshetty wrote: > Add Epoch Subsystem (EPSS) L3 interconnect provider support on > SA8775P SoCs. > > Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com> > --- > drivers/interconnect/qcom/osm-l3.c | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c > index 61a8695a9adc..e97d61a9d8d7 100644 > --- a/drivers/interconnect/qcom/osm-l3.c > +++ b/drivers/interconnect/qcom/osm-l3.c > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > */ > > #include <linux/args.h> > @@ -74,6 +75,11 @@ enum { > OSM_L3_SLAVE_NODE, > }; > > +enum { > + EPSS_L3_CL1_MASTER_NODE = 20000, > + EPSS_L3_CL1_SLAVE_NODE, > +}; > + > #define DEFINE_QNODE(_name, _id, _buswidth, ...) \ > static const struct qcom_osm_l3_node _name = { \ > .name = #_name, \ > @@ -99,6 +105,15 @@ static const struct qcom_osm_l3_node * const epss_l3_nodes[] = { > [SLAVE_EPSS_L3_SHARED] = &epss_l3_slave, > }; > > +DEFINE_QNODE(epss_l3_cl1_master, EPSS_L3_CL1_MASTER_NODE, 32, > + EPSS_L3_CL1_SLAVE_NODE); > +DEFINE_QNODE(epss_l3_cl1_slave, EPSS_L3_CL1_SLAVE_NODE, 32); > + > +static const struct qcom_osm_l3_node * const epss_l3_cl1_nodes[] = { > + [MASTER_EPSS_L3_APPS] = &epss_l3_cl1_master, > + [SLAVE_EPSS_L3_SHARED] = &epss_l3_cl1_slave, > +}; > + > static const struct qcom_osm_l3_desc osm_l3 = { > .nodes = osm_l3_nodes, > .num_nodes = ARRAY_SIZE(osm_l3_nodes), > @@ -115,6 +130,14 @@ static const struct qcom_osm_l3_desc epss_l3_perf_state = { > .reg_perf_state = EPSS_REG_PERF_STATE, > }; > > +static const struct qcom_osm_l3_desc epss_l3_cl1_perf_state = { > + .nodes = epss_l3_cl1_nodes, > + .num_nodes = ARRAY_SIZE(epss_l3_cl1_nodes), > + .lut_row_size = EPSS_LUT_ROW_SIZE, > + .reg_freq_lut = EPSS_REG_FREQ_LUT, > + .reg_perf_state = EPSS_REG_PERF_STATE, > +}; This is a bad workaround for the unfortunate interconnect API choices (conflicting ICC IDs), in no way specific to this platform > + > static const struct qcom_osm_l3_desc epss_l3_l3_vote = { > .nodes = epss_l3_nodes, > .num_nodes = ARRAY_SIZE(epss_l3_nodes), > @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { > { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, > { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, > { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, > + { .compatible = "qcom,sa8775p-epss-l3-cl0", > + .data = &epss_l3_perf_state }, Reuse qcom,sm8250-epss-l3, like: compatible = "qcom,foobar-epss-l3", "qcom,sm8250-epss-l3"; Konrad
On 9/6/2024 10:00 PM, Krzysztof Kozlowski wrote: > On 06/09/2024 17:32, Raviteja Laggyshetty wrote: >> >> On 9/4/2024 11:52 PM, Krzysztof Kozlowski wrote: >>> On 04/09/2024 19:12, Raviteja Laggyshetty wrote: >>>> + >>>> static const struct qcom_osm_l3_desc epss_l3_l3_vote = { >>>> .nodes = epss_l3_nodes, >>>> .num_nodes = ARRAY_SIZE(epss_l3_nodes), >>>> @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { >>>> { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, >>>> { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, >>>> { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, >>>> + { .compatible = "qcom,sa8775p-epss-l3-cl0", >>>> + .data = &epss_l3_perf_state }, >>> Don't grow it but express compatibility. >> ok. Will rename compatible from "qcom,sa8775p-epss-l3-cl0" to "qcom,sa8775p-epss-l3". > > This won't solve the problem. You still grow the table, right? Falling back to "qcom,epss-l3" won't work because we need to vote into perf state register. I am introducing a new fallback compatible "qcom,epss-l3-perf" for perf voting, which can be used for upcoming qcs8300. epss_l3_cl0: interconnect@18590000 { compatible = "qcom,sa8775p-epss-l3", "qcom,epss-l3-perf"; }; > > Best regards, > Krzysztof >
On 25/10/2024 17:38, Raviteja Laggyshetty wrote: > > > On 9/6/2024 10:00 PM, Krzysztof Kozlowski wrote: >> On 06/09/2024 17:32, Raviteja Laggyshetty wrote: >>> >>> On 9/4/2024 11:52 PM, Krzysztof Kozlowski wrote: >>>> On 04/09/2024 19:12, Raviteja Laggyshetty wrote: >>>>> + >>>>> static const struct qcom_osm_l3_desc epss_l3_l3_vote = { >>>>> .nodes = epss_l3_nodes, >>>>> .num_nodes = ARRAY_SIZE(epss_l3_nodes), >>>>> @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { >>>>> { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, >>>>> { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, >>>>> { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, >>>>> + { .compatible = "qcom,sa8775p-epss-l3-cl0", >>>>> + .data = &epss_l3_perf_state }, >>>> Don't grow it but express compatibility. >>> ok. Will rename compatible from "qcom,sa8775p-epss-l3-cl0" to "qcom,sa8775p-epss-l3". >> >> This won't solve the problem. You still grow the table, right? > > Falling back to "qcom,epss-l3" won't work because we need to vote into perf state register. > I am introducing a new fallback compatible "qcom,epss-l3-perf" for perf voting, which can be used for upcoming qcs8300. Maybe, no clue, this was 1.5 months ago. I don't have original patches in the inbox anymore. Just choose something sensible following writing bindings guideline. Best regards, Krzysztof
On 26.10.2024 1:28 PM, Krzysztof Kozlowski wrote: > On 25/10/2024 17:38, Raviteja Laggyshetty wrote: >> >> >> On 9/6/2024 10:00 PM, Krzysztof Kozlowski wrote: >>> On 06/09/2024 17:32, Raviteja Laggyshetty wrote: >>>> >>>> On 9/4/2024 11:52 PM, Krzysztof Kozlowski wrote: >>>>> On 04/09/2024 19:12, Raviteja Laggyshetty wrote: >>>>>> + >>>>>> static const struct qcom_osm_l3_desc epss_l3_l3_vote = { >>>>>> .nodes = epss_l3_nodes, >>>>>> .num_nodes = ARRAY_SIZE(epss_l3_nodes), >>>>>> @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { >>>>>> { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, >>>>>> { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, >>>>>> { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, >>>>>> + { .compatible = "qcom,sa8775p-epss-l3-cl0", >>>>>> + .data = &epss_l3_perf_state }, >>>>> Don't grow it but express compatibility. >>>> ok. Will rename compatible from "qcom,sa8775p-epss-l3-cl0" to "qcom,sa8775p-epss-l3". >>> >>> This won't solve the problem. You still grow the table, right? >> >> Falling back to "qcom,epss-l3" won't work because we need to vote into perf state register. >> I am introducing a new fallback compatible "qcom,epss-l3-perf" for perf voting, which can be used for upcoming qcs8300. > > Maybe, no clue, this was 1.5 months ago. I don't have original patches > in the inbox anymore. > > Just choose something sensible following writing bindings guideline. You can see that qcom,sm8250-epss-l3 uses the same match data, so that sounds like a good fit Konrad
On 26/10/2024 14:24, Konrad Dybcio wrote: > On 26.10.2024 1:28 PM, Krzysztof Kozlowski wrote: >> On 25/10/2024 17:38, Raviteja Laggyshetty wrote: >>> >>> >>> On 9/6/2024 10:00 PM, Krzysztof Kozlowski wrote: >>>> On 06/09/2024 17:32, Raviteja Laggyshetty wrote: >>>>> >>>>> On 9/4/2024 11:52 PM, Krzysztof Kozlowski wrote: >>>>>> On 04/09/2024 19:12, Raviteja Laggyshetty wrote: >>>>>>> + >>>>>>> static const struct qcom_osm_l3_desc epss_l3_l3_vote = { >>>>>>> .nodes = epss_l3_nodes, >>>>>>> .num_nodes = ARRAY_SIZE(epss_l3_nodes), >>>>>>> @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { >>>>>>> { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, >>>>>>> { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, >>>>>>> { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, >>>>>>> + { .compatible = "qcom,sa8775p-epss-l3-cl0", >>>>>>> + .data = &epss_l3_perf_state }, >>>>>> Don't grow it but express compatibility. >>>>> ok. Will rename compatible from "qcom,sa8775p-epss-l3-cl0" to "qcom,sa8775p-epss-l3". >>>> >>>> This won't solve the problem. You still grow the table, right? >>> >>> Falling back to "qcom,epss-l3" won't work because we need to vote into perf state register. >>> I am introducing a new fallback compatible "qcom,epss-l3-perf" for perf voting, which can be used for upcoming qcs8300. >> >> Maybe, no clue, this was 1.5 months ago. I don't have original patches >> in the inbox anymore. >> >> Just choose something sensible following writing bindings guideline. > > You can see that qcom,sm8250-epss-l3 uses the same match data, so that > sounds like a good fit Yep, so probably this was obvious to me when I wrote above comment and I just don't get why fallbacking to qcom,sa8775p-epss-l3... Best regards, Krzysztof
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c index 61a8695a9adc..e97d61a9d8d7 100644 --- a/drivers/interconnect/qcom/osm-l3.c +++ b/drivers/interconnect/qcom/osm-l3.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/args.h> @@ -74,6 +75,11 @@ enum { OSM_L3_SLAVE_NODE, }; +enum { + EPSS_L3_CL1_MASTER_NODE = 20000, + EPSS_L3_CL1_SLAVE_NODE, +}; + #define DEFINE_QNODE(_name, _id, _buswidth, ...) \ static const struct qcom_osm_l3_node _name = { \ .name = #_name, \ @@ -99,6 +105,15 @@ static const struct qcom_osm_l3_node * const epss_l3_nodes[] = { [SLAVE_EPSS_L3_SHARED] = &epss_l3_slave, }; +DEFINE_QNODE(epss_l3_cl1_master, EPSS_L3_CL1_MASTER_NODE, 32, + EPSS_L3_CL1_SLAVE_NODE); +DEFINE_QNODE(epss_l3_cl1_slave, EPSS_L3_CL1_SLAVE_NODE, 32); + +static const struct qcom_osm_l3_node * const epss_l3_cl1_nodes[] = { + [MASTER_EPSS_L3_APPS] = &epss_l3_cl1_master, + [SLAVE_EPSS_L3_SHARED] = &epss_l3_cl1_slave, +}; + static const struct qcom_osm_l3_desc osm_l3 = { .nodes = osm_l3_nodes, .num_nodes = ARRAY_SIZE(osm_l3_nodes), @@ -115,6 +130,14 @@ static const struct qcom_osm_l3_desc epss_l3_perf_state = { .reg_perf_state = EPSS_REG_PERF_STATE, }; +static const struct qcom_osm_l3_desc epss_l3_cl1_perf_state = { + .nodes = epss_l3_cl1_nodes, + .num_nodes = ARRAY_SIZE(epss_l3_cl1_nodes), + .lut_row_size = EPSS_LUT_ROW_SIZE, + .reg_freq_lut = EPSS_REG_FREQ_LUT, + .reg_perf_state = EPSS_REG_PERF_STATE, +}; + static const struct qcom_osm_l3_desc epss_l3_l3_vote = { .nodes = epss_l3_nodes, .num_nodes = ARRAY_SIZE(epss_l3_nodes), @@ -284,6 +307,10 @@ static const struct of_device_id osm_l3_of_match[] = { { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, + { .compatible = "qcom,sa8775p-epss-l3-cl0", + .data = &epss_l3_perf_state }, + { .compatible = "qcom,sa8775p-epss-l3-cl1", + .data = &epss_l3_cl1_perf_state }, { } }; MODULE_DEVICE_TABLE(of, osm_l3_of_match);
Add Epoch Subsystem (EPSS) L3 interconnect provider support on SA8775P SoCs. Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com> --- drivers/interconnect/qcom/osm-l3.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)