@@ -897,17 +897,9 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
}
/* Enable hidraw so existing user-space tools can continue to work */
- ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
- if (ret) {
- hid_err(hdev, "hid hw start failed with %d\n", ret);
+ ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
+ if (ret)
return ret;
- }
-
- ret = hid_hw_open(hdev);
- if (ret) {
- hid_err(hdev, "hid hw open failed with %d\n", ret);
- goto fail_and_stop;
- }
switch (hdev->product) {
case USB_PRODUCT_ID_X53:
@@ -928,15 +920,12 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
device_name = "kraken2023elite";
break;
default:
- ret = -ENODEV;
- goto fail_and_close;
+ return -ENODEV;
}
priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL);
- if (!priv->buffer) {
- ret = -ENOMEM;
- goto fail_and_close;
- }
+ if (!priv->buffer)
+ return -ENOMEM;
mutex_init(&priv->buffer_lock);
mutex_init(&priv->z53_status_request_lock);
@@ -948,7 +937,7 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
ret = kraken3_init_device(hdev);
if (ret < 0) {
hid_err(hdev, "device init failed with %d\n", ret);
- goto fail_and_close;
+ return ret;
}
ret = kraken3_get_fw_ver(hdev);
@@ -960,18 +949,12 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
if (IS_ERR(priv->hwmon_dev)) {
ret = PTR_ERR(priv->hwmon_dev);
hid_err(hdev, "hwmon registration failed with %d\n", ret);
- goto fail_and_close;
+ return ret;
}
kraken3_debugfs_init(priv, device_name);
return 0;
-
-fail_and_close:
- hid_hw_close(hdev);
-fail_and_stop:
- hid_hw_stop(hdev);
- return ret;
}
static void kraken3_remove(struct hid_device *hdev)
@@ -980,9 +963,6 @@ static void kraken3_remove(struct hid_device *hdev)
debugfs_remove_recursive(priv->debugfs);
hwmon_device_unregister(priv->hwmon_dev);
-
- hid_hw_close(hdev);
- hid_hw_stop(hdev);
}
static const struct hid_device_id kraken3_table[] = {
Currently, the nzxt-kraken2 module needs to maintain hid resources by itself. Use devm_hid_hw_start_and_open helper to ensure that hid resources are consistent with the device life cycle, and release hid resources before device is released. At the same time, it can avoid the goto-release encoding, drop the fail_and_close and fail_and_stop lables, and directly return the error code when an error occurs. Signed-off-by: Li Zetao <lizetao1@huawei.com> --- v1 -> v2: Adjust commit information v1: https://lore.kernel.org/all/20240904123607.3407364-19-lizetao1@huawei.com/ drivers/hwmon/nzxt-kraken3.c | 34 +++++++--------------------------- 1 file changed, 7 insertions(+), 27 deletions(-)