| Message ID | 20240618101726.110416-2-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | drm/mediatek: Add support for OF graphs | expand |
Hi, Angelo: On Tue, 2024-06-18 at 12:17 +0200, AngeloGioacchino Del Regno wrote: > The display IPs in MediaTek SoCs support being interconnected with > different instances of DDP IPs (for example, merge0 or merge1) and/or > with different DDP IPs (for example, rdma can be connected with either > color, dpi, dsi, merge, etc), forming a full Display Data Path that > ends with an actual display. > > The final display pipeline is effectively board specific, as it does > depend on the display that is attached to it, and eventually on the > sensors supported by the board (for example, Adaptive Ambient Light > would need an Ambient Light Sensor, otherwise it's pointless!), other > than the output type. > > Add support for OF graphs to most of the MediaTek DDP (display) bindings > to add flexibility to build custom hardware paths, hence enabling board > specific configuration of the display pipeline and allowing to finally > migrate away from using hardcoded paths. Reviewed-by: CK Hu <ck.hu@mediatek.com> > > Reviewed-by: Rob Herring (Arm) <robh@kernel.org> > Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> > Tested-by: Alexandre Mergnat <amergnat@baylibre.com> > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > .../display/mediatek/mediatek,aal.yaml | 40 +++++++++++++++++++ > .../display/mediatek/mediatek,ccorr.yaml | 21 ++++++++++ > .../display/mediatek/mediatek,color.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,dither.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,dpi.yaml | 25 +++++++++++- > .../display/mediatek/mediatek,dsc.yaml | 24 +++++++++++ > .../display/mediatek/mediatek,dsi.yaml | 27 ++++++++++++- > .../display/mediatek/mediatek,ethdr.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,gamma.yaml | 19 +++++++++ > .../display/mediatek/mediatek,merge.yaml | 23 +++++++++++ > .../display/mediatek/mediatek,od.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,ovl-2l.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,ovl.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,postmask.yaml | 21 ++++++++++ > .../display/mediatek/mediatek,rdma.yaml | 22 ++++++++++ > .../display/mediatek/mediatek,ufoe.yaml | 21 ++++++++++ > 16 files changed, 372 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml > index b4c28e96dd55..623cf7e37fe3 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml > @@ -61,6 +61,27 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: AAL input port > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + AAL output to the next component's input, for example could be one > + of many gamma, overdrive or other blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > @@ -88,5 +109,24 @@ examples: > power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; > clocks = <&mmsys CLK_MM_DISP_AAL>; > mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + aal0_in: endpoint { > + remote-endpoint = <&ccorr0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + aal0_out: endpoint { > + remote-endpoint = <&gamma0_in>; > + }; > + }; > + }; > }; > }; > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml > index 8c2a737237f2..71ea277a5d8e 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml > @@ -54,6 +54,27 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: CCORR input port > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + CCORR output to the input of the next desired component in the > + display pipeline, usually only one of the available AAL blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml > index b886ca0d89ea..61d040a10c08 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml > @@ -64,6 +64,28 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: COLOR input port > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + COLOR output to the input of the next desired component in the > + display pipeline, for example one of the available CCORR or AAL > + blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml > index 1588b3f7cec7..3d4ab3f86294 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml > @@ -55,6 +55,28 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: DITHER input, usually from a POSTMASK or GAMMA block. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + DITHER output to the input of the next desired component in the > + display pipeline, for example one of the available DSC compressors, > + DP_INTF, DSI, LVDS or others. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > index 803c00f26206..6607cb1c6e0a 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > @@ -64,13 +64,34 @@ properties: > Output port node. This port should be connected to the input port of an > attached HDMI, LVDS or DisplayPort encoder chip. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPI input port > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPI output to an HDMI, LVDS or DisplayPort encoder input > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > - interrupts > - clocks > - clock-names > - - port > + > +oneOf: > + - required: > + - port > + - required: > + - ports > > additionalProperties: false > > @@ -79,7 +100,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/mt8173-clk.h> > > - dpi0: dpi@1401d000 { > + dpi: dpi@1401d000 { > compatible = "mediatek,mt8173-dpi"; > reg = <0x1401d000 0x1000>; > interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml > index 2cbdd9ee449d..846de6c17d93 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml > @@ -49,6 +49,30 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Display Stream Compression input, usually from one of the DITHER > + or MERGE blocks. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Display Stream Compression output to the input of the next desired > + component in the display pipeline, for example to MERGE, DP_INTF, > + DPI or DSI. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml > index 8611319bed2e..2e9d3d23cbc1 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml > @@ -76,6 +76,26 @@ properties: > Output port node. This port should be connected to the input > port of an attached DSI panel or DSI-to-eDP encoder chip. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input ports can have multiple endpoints, each of those connects > + to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: DSI input port, usually from DITHER, DSC or MERGE > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + DSI output to an attached DSI panel, or a DSI-to-X encoder chip > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > @@ -85,7 +105,12 @@ required: > - clock-names > - phys > - phy-names > - - port > + > +oneOf: > + - required: > + - port > + - required: > + - ports > > unevaluatedProperties: false > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > index 677882348ede..98db47894eeb 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > @@ -110,6 +110,28 @@ properties: > include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display > function block. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: ETHDR input, usually from one of the MERGE blocks. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + ETHDR output to the input of the next desired component in the > + display pipeline, for example one of the available MERGE blocks, > + or others. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml > index b8b8e83ebc3f..17f299abda11 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml > @@ -64,6 +64,25 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: GAMMA input, usually from one of the AAL blocks. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + GAMMA output to the input of the next desired component in the > + display pipeline, for example one of the available DITHER or > + POSTMASK blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml > index dae839279950..0de9f64f3f84 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml > @@ -77,6 +77,29 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA, > + ETHDR or even from a different MERGE block > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or > + a different MERGE block, or others. > + > + required: > + - port@0 > + - port@1 > + > resets: > description: reset controller > See Documentation/devicetree/bindings/reset/reset.txt for details. > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml > index 831c653caffd..71534febd49c 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml > @@ -38,6 +38,28 @@ properties: > items: > - description: OD Clock > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: OD input port, usually from an AAL block > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + OD output to the input of the next desired component in the > + display pipeline, for example one of the available RDMA or > + other blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml > index c7dd0ef02dcf..bacdfe7d08a6 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml > @@ -57,6 +57,28 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: OVL input port from MMSYS, VDOSYS or other OVLs > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + OVL output to the input of the next desired component in the > + display pipeline, for example one of the available COLOR, RDMA > + or WDMA blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml > index c471a181d125..e93f0247bdcc 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml > @@ -74,6 +74,28 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: OVL input port from MMSYS or one of multiple VDOSYS > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + OVL output to the input of the next desired component in the > + display pipeline, for example one of the available COLOR, RDMA > + or WDMA blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml > index 11fe32e50a59..fb6fe4742624 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml > @@ -52,6 +52,27 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: POSTMASK input port, usually from GAMMA > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + POSTMASK output to the input of the next desired component in the > + display pipeline, for example one of the available DITHER blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml > index 39dbb5c8bcf8..edb8d3b67025 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml > @@ -86,6 +86,28 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle-array > maxItems: 1 > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: RDMA input port, usually from MMSYS, OD or OVL > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + RDMA output to the input of the next desired component in the > + display pipeline, for example one of the available COLOR, DPI, > + DSI, MERGE or UFOE blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml > index 39e3e2d4a0db..61a5e22effbf 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml > @@ -43,6 +43,27 @@ properties: > items: > - description: UFOe Clock > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: UFOE input, usually from one of the RDMA blocks. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + UFOE output to the input of the next desired component in the > + display pipeline, usually one of the available DSI blocks. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg
Hi, Angelo: On Tue, 2024-06-18 at 12:17 +0200, AngeloGioacchino Del Regno wrote: > The display IPs in MediaTek SoCs support being interconnected with > different instances of DDP IPs (for example, merge0 or merge1) and/or > with different DDP IPs (for example, rdma can be connected with either > color, dpi, dsi, merge, etc), forming a full Display Data Path that > ends with an actual display. > > The final display pipeline is effectively board specific, as it does > depend on the display that is attached to it, and eventually on the > sensors supported by the board (for example, Adaptive Ambient Light > would need an Ambient Light Sensor, otherwise it's pointless!), other > than the output type. > > Add support for OF graphs to most of the MediaTek DDP (display) bindings > to add flexibility to build custom hardware paths, hence enabling board > specific configuration of the display pipeline and allowing to finally > migrate away from using hardcoded paths. > > Reviewed-by: Rob Herring (Arm) <robh@kernel.org> > Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> > Tested-by: Alexandre Mergnat <amergnat@baylibre.com> > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- [snip] > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > index 677882348ede..98db47894eeb 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml > @@ -110,6 +110,28 @@ properties: > include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display > function block. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: > + Input and output ports can have multiple endpoints, each of those > + connects to either the primary, secondary, etc, display pipeline. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: ETHDR input, usually from one of the MERGE blocks. Sorry, I find one question now. I think ETHDR may have multiple input, and ETHDR receive data from all input at the same time. Why here has only one input port? MERGE -->+-----------------+ | | MERGE -->| | | ETHDR | MERGE -->| | | | MERGE -->+-----------------+ Regards, CK > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + ETHDR output to the input of the next desired component in the > + display pipeline, for example one of the available MERGE blocks, > + or others. > + > + required: > + - port@0 > + - port@1 > + > required: > - compatible > - reg >
Il 08/08/24 05:45, CK Hu (胡俊光) ha scritto: > Hi, Angelo: > > On Tue, 2024-06-18 at 12:17 +0200, AngeloGioacchino Del Regno wrote: >> The display IPs in MediaTek SoCs support being interconnected with >> different instances of DDP IPs (for example, merge0 or merge1) and/or >> with different DDP IPs (for example, rdma can be connected with either >> color, dpi, dsi, merge, etc), forming a full Display Data Path that >> ends with an actual display. >> >> The final display pipeline is effectively board specific, as it does >> depend on the display that is attached to it, and eventually on the >> sensors supported by the board (for example, Adaptive Ambient Light >> would need an Ambient Light Sensor, otherwise it's pointless!), other >> than the output type. >> >> Add support for OF graphs to most of the MediaTek DDP (display) bindings >> to add flexibility to build custom hardware paths, hence enabling board >> specific configuration of the display pipeline and allowing to finally >> migrate away from using hardcoded paths. >> >> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> >> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> >> Tested-by: Alexandre Mergnat <amergnat@baylibre.com> >> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> >> --- > > [snip] > >> >> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml >> index 677882348ede..98db47894eeb 100644 >> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml >> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml >> @@ -110,6 +110,28 @@ properties: >> include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display >> function block. >> >> + ports: >> + $ref: /schemas/graph.yaml#/properties/ports >> + description: >> + Input and output ports can have multiple endpoints, each of those >> + connects to either the primary, secondary, etc, display pipeline. >> + >> + properties: >> + port@0: >> + $ref: /schemas/graph.yaml#/properties/port >> + description: ETHDR input, usually from one of the MERGE blocks. > > Sorry, I find one question now. > I think ETHDR may have multiple input, and ETHDR receive data from all input at the same time. > Why here has only one input port? > > MERGE -->+-----------------+ > | | > MERGE -->| | > | ETHDR | > MERGE -->| | > | | > MERGE -->+-----------------+ > Because ETHDR takes one input (ex. "one image", or "one data stream") port, which is composed of multiple input endpoints (where each endpoint is a MERGE block) :-) Cheers, Angelo > Regards, > CK > >> + >> + port@1: >> + $ref: /schemas/graph.yaml#/properties/port >> + description: >> + ETHDR output to the input of the next desired component in the >> + display pipeline, for example one of the available MERGE blocks, >> + or others. >> + >> + required: >> + - port@0 >> + - port@1 >> + >> required: >> - compatible >> - reg >>
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index b4c28e96dd55..623cf7e37fe3 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -61,6 +61,27 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: AAL input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + AAL output to the next component's input, for example could be one + of many gamma, overdrive or other blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg @@ -88,5 +109,24 @@ examples: power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_AAL>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + aal0_in: endpoint { + remote-endpoint = <&ccorr0_out>; + }; + }; + + port@1 { + reg = <1>; + aal0_out: endpoint { + remote-endpoint = <&gamma0_in>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml index 8c2a737237f2..71ea277a5d8e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml @@ -54,6 +54,27 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: CCORR input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + CCORR output to the input of the next desired component in the + display pipeline, usually only one of the available AAL blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index b886ca0d89ea..61d040a10c08 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -64,6 +64,28 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: COLOR input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + COLOR output to the input of the next desired component in the + display pipeline, for example one of the available CCORR or AAL + blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml index 1588b3f7cec7..3d4ab3f86294 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml @@ -55,6 +55,28 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DITHER input, usually from a POSTMASK or GAMMA block. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DITHER output to the input of the next desired component in the + display pipeline, for example one of the available DSC compressors, + DP_INTF, DSI, LVDS or others. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 803c00f26206..6607cb1c6e0a 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -64,13 +64,34 @@ properties: Output port node. This port should be connected to the input port of an attached HDMI, LVDS or DisplayPort encoder chip. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPI input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPI output to an HDMI, LVDS or DisplayPort encoder input + + required: + - port@0 + - port@1 + required: - compatible - reg - interrupts - clocks - clock-names - - port + +oneOf: + - required: + - port + - required: + - ports additionalProperties: false @@ -79,7 +100,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt8173-clk.h> - dpi0: dpi@1401d000 { + dpi: dpi@1401d000 { compatible = "mediatek,mt8173-dpi"; reg = <0x1401d000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml index 2cbdd9ee449d..846de6c17d93 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml @@ -49,6 +49,30 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Display Stream Compression input, usually from one of the DITHER + or MERGE blocks. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Display Stream Compression output to the input of the next desired + component in the display pipeline, for example to MERGE, DP_INTF, + DPI or DSI. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index 8611319bed2e..2e9d3d23cbc1 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -76,6 +76,26 @@ properties: Output port node. This port should be connected to the input port of an attached DSI panel or DSI-to-eDP encoder chip. + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input ports can have multiple endpoints, each of those connects + to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DSI input port, usually from DITHER, DSC or MERGE + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DSI output to an attached DSI panel, or a DSI-to-X encoder chip + + required: + - port@0 + - port@1 + required: - compatible - reg @@ -85,7 +105,12 @@ required: - clock-names - phys - phy-names - - port + +oneOf: + - required: + - port + - required: + - ports unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml index 677882348ede..98db47894eeb 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml @@ -110,6 +110,28 @@ properties: include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display function block. + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: ETHDR input, usually from one of the MERGE blocks. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + ETHDR output to the input of the next desired component in the + display pipeline, for example one of the available MERGE blocks, + or others. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index b8b8e83ebc3f..17f299abda11 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -64,6 +64,25 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: GAMMA input, usually from one of the AAL blocks. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + GAMMA output to the input of the next desired component in the + display pipeline, for example one of the available DITHER or + POSTMASK blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index dae839279950..0de9f64f3f84 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -77,6 +77,29 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA, + ETHDR or even from a different MERGE block + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or + a different MERGE block, or others. + + required: + - port@0 + - port@1 + resets: description: reset controller See Documentation/devicetree/bindings/reset/reset.txt for details. diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml index 831c653caffd..71534febd49c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml @@ -38,6 +38,28 @@ properties: items: - description: OD Clock + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: OD input port, usually from an AAL block + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + OD output to the input of the next desired component in the + display pipeline, for example one of the available RDMA or + other blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml index c7dd0ef02dcf..bacdfe7d08a6 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml @@ -57,6 +57,28 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: OVL input port from MMSYS, VDOSYS or other OVLs + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + OVL output to the input of the next desired component in the + display pipeline, for example one of the available COLOR, RDMA + or WDMA blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index c471a181d125..e93f0247bdcc 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -74,6 +74,28 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: OVL input port from MMSYS or one of multiple VDOSYS + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + OVL output to the input of the next desired component in the + display pipeline, for example one of the available COLOR, RDMA + or WDMA blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml index 11fe32e50a59..fb6fe4742624 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml @@ -52,6 +52,27 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: POSTMASK input port, usually from GAMMA + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + POSTMASK output to the input of the next desired component in the + display pipeline, for example one of the available DITHER blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml index 39dbb5c8bcf8..edb8d3b67025 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -86,6 +86,28 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: RDMA input port, usually from MMSYS, OD or OVL + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + RDMA output to the input of the next desired component in the + display pipeline, for example one of the available COLOR, DPI, + DSI, MERGE or UFOE blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml index 39e3e2d4a0db..61a5e22effbf 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml @@ -43,6 +43,27 @@ properties: items: - description: UFOe Clock + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Input and output ports can have multiple endpoints, each of those + connects to either the primary, secondary, etc, display pipeline. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: UFOE input, usually from one of the RDMA blocks. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + UFOE output to the input of the next desired component in the + display pipeline, usually one of the available DSI blocks. + + required: + - port@0 + - port@1 + required: - compatible - reg