| Message ID | 20240911100813.338-4-quic_mukhopad@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for DisplayPort on SA8775P platform | expand |
On Wed, 11 Sept 2024 at 13:08, Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com> wrote: > > Add support for eDP PHY v5 found on the Qualcomm SA8775P platform. > > Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com> > --- > drivers/phy/qualcomm/phy-qcom-edp.c | 47 +++++++++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c > index 0f860a807d1b..34a47cd2919d 100644 > --- a/drivers/phy/qualcomm/phy-qcom-edp.c > +++ b/drivers/phy/qualcomm/phy-qcom-edp.c > @@ -191,6 +191,45 @@ static u8 edp_phy_aux_cfg_v4[10] = { > 0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03 > }; > > +static const u8 edp_swing_hbr_rbr_v5[4][4] = { > + { 0x07, 0x0f, 0x16, 0x1f }, > + { 0x0d, 0x16, 0x1e, 0xff }, > + { 0x11, 0x1b, 0xff, 0xff }, > + { 0x16, 0xff, 0xff, 0xff } > +}; Same as v4 > + > +static const u8 edp_pre_emp_hbr_rbr_v5[4][4] = { > + { 0x05, 0x11, 0x17, 0x1d }, > + { 0x05, 0x11, 0x18, 0xff }, > + { 0x06, 0x11, 0xff, 0xff }, > + { 0x00, 0xff, 0xff, 0xff } > +}; Could you please confirm that there is a single value difference? > + > +static const u8 edp_swing_hbr2_hbr3_v5[4][4] = { > + { 0x0b, 0x11, 0x17, 0x1c }, > + { 0x10, 0x19, 0x1f, 0xff }, > + { 0x19, 0x1f, 0xff, 0xff }, > + { 0x1f, 0xff, 0xff, 0xff } > +}; Same as v4 > + > +static const u8 edp_pre_emp_hbr2_hbr3_v5[4][4] = { > + { 0x0c, 0x15, 0x19, 0x1e }, > + { 0x0b, 0x15, 0x19, 0xff }, > + { 0x0e, 0x14, 0xff, 0xff }, > + { 0x0d, 0xff, 0xff, 0xff } > +}; This one looks fine > + > +static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v5 = { > + .swing_hbr_rbr = &edp_swing_hbr_rbr_v5, > + .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3_v5, > + .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr_v5, > + .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v5, > +}; > + > +static u8 edp_phy_aux_cfg_v5[10] = { > + 0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03 > +}; > + > static int qcom_edp_phy_init(struct phy *phy) > { > struct qcom_edp *edp = phy_get_drvdata(phy); > @@ -520,6 +559,13 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = { > .com_configure_ssc = qcom_edp_com_configure_ssc_v4, > }; > > +static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { > + .is_edp = false, > + .aux_cfg = edp_phy_aux_cfg_v5, > + .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v5, > + .ver_ops = &qcom_edp_phy_ops_v4, > +}; > + > static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { > .aux_cfg = edp_phy_aux_cfg_v4, > .ver_ops = &qcom_edp_phy_ops_v4, > @@ -1114,6 +1160,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) > } > > static const struct of_device_id qcom_edp_phy_match_table[] = { > + { .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, }, > { .compatible = "qcom,sc7280-edp-phy", .data = &sc7280_dp_phy_cfg, }, > { .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, }, > { .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, }, > -- > 2.17.1 >
On 9/11/2024 4:10 PM, Dmitry Baryshkov wrote: > On Wed, 11 Sept 2024 at 13:08, Soutrik Mukhopadhyay > <quic_mukhopad@quicinc.com> wrote: >> Add support for eDP PHY v5 found on the Qualcomm SA8775P platform. >> >> Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com> >> --- >> drivers/phy/qualcomm/phy-qcom-edp.c | 47 +++++++++++++++++++++++++++++ >> 1 file changed, 47 insertions(+) >> >> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c >> index 0f860a807d1b..34a47cd2919d 100644 >> --- a/drivers/phy/qualcomm/phy-qcom-edp.c >> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c >> @@ -191,6 +191,45 @@ static u8 edp_phy_aux_cfg_v4[10] = { >> 0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03 >> }; >> >> +static const u8 edp_swing_hbr_rbr_v5[4][4] = { >> + { 0x07, 0x0f, 0x16, 0x1f }, >> + { 0x0d, 0x16, 0x1e, 0xff }, >> + { 0x11, 0x1b, 0xff, 0xff }, >> + { 0x16, 0xff, 0xff, 0xff } >> +}; > Same as v4 Yes, we will reuse edp_swing_hbr_rbr for v5. > >> + >> +static const u8 edp_pre_emp_hbr_rbr_v5[4][4] = { >> + { 0x05, 0x11, 0x17, 0x1d }, >> + { 0x05, 0x11, 0x18, 0xff }, >> + { 0x06, 0x11, 0xff, 0xff }, >> + { 0x00, 0xff, 0xff, 0xff } >> +}; > Could you please confirm that there is a single value difference? Yes, there is a single value difference. > >> + >> +static const u8 edp_swing_hbr2_hbr3_v5[4][4] = { >> + { 0x0b, 0x11, 0x17, 0x1c }, >> + { 0x10, 0x19, 0x1f, 0xff }, >> + { 0x19, 0x1f, 0xff, 0xff }, >> + { 0x1f, 0xff, 0xff, 0xff } >> +}; > Same as v4 Yes, we will reuse edp_swing_hbr2_hbr3 for v5. > >> + >> +static const u8 edp_pre_emp_hbr2_hbr3_v5[4][4] = { >> + { 0x0c, 0x15, 0x19, 0x1e }, >> + { 0x0b, 0x15, 0x19, 0xff }, >> + { 0x0e, 0x14, 0xff, 0xff }, >> + { 0x0d, 0xff, 0xff, 0xff } >> +}; > This one looks fine > >> + >> +static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v5 = { >> + .swing_hbr_rbr = &edp_swing_hbr_rbr_v5, >> + .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3_v5, >> + .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr_v5, >> + .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v5, >> +}; >> + >> +static u8 edp_phy_aux_cfg_v5[10] = { >> + 0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03 >> +}; >> + >> static int qcom_edp_phy_init(struct phy *phy) >> { >> struct qcom_edp *edp = phy_get_drvdata(phy); >> @@ -520,6 +559,13 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = { >> .com_configure_ssc = qcom_edp_com_configure_ssc_v4, >> }; >> >> +static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { >> + .is_edp = false, >> + .aux_cfg = edp_phy_aux_cfg_v5, >> + .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v5, >> + .ver_ops = &qcom_edp_phy_ops_v4, >> +}; >> + >> static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { >> .aux_cfg = edp_phy_aux_cfg_v4, >> .ver_ops = &qcom_edp_phy_ops_v4, >> @@ -1114,6 +1160,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) >> } >> >> static const struct of_device_id qcom_edp_phy_match_table[] = { >> + { .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, }, >> { .compatible = "qcom,sc7280-edp-phy", .data = &sc7280_dp_phy_cfg, }, >> { .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, }, >> { .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, }, >> -- >> 2.17.1 >> >
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 0f860a807d1b..34a47cd2919d 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -191,6 +191,45 @@ static u8 edp_phy_aux_cfg_v4[10] = { 0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03 }; +static const u8 edp_swing_hbr_rbr_v5[4][4] = { + { 0x07, 0x0f, 0x16, 0x1f }, + { 0x0d, 0x16, 0x1e, 0xff }, + { 0x11, 0x1b, 0xff, 0xff }, + { 0x16, 0xff, 0xff, 0xff } +}; + +static const u8 edp_pre_emp_hbr_rbr_v5[4][4] = { + { 0x05, 0x11, 0x17, 0x1d }, + { 0x05, 0x11, 0x18, 0xff }, + { 0x06, 0x11, 0xff, 0xff }, + { 0x00, 0xff, 0xff, 0xff } +}; + +static const u8 edp_swing_hbr2_hbr3_v5[4][4] = { + { 0x0b, 0x11, 0x17, 0x1c }, + { 0x10, 0x19, 0x1f, 0xff }, + { 0x19, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static const u8 edp_pre_emp_hbr2_hbr3_v5[4][4] = { + { 0x0c, 0x15, 0x19, 0x1e }, + { 0x0b, 0x15, 0x19, 0xff }, + { 0x0e, 0x14, 0xff, 0xff }, + { 0x0d, 0xff, 0xff, 0xff } +}; + +static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v5 = { + .swing_hbr_rbr = &edp_swing_hbr_rbr_v5, + .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3_v5, + .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr_v5, + .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v5, +}; + +static u8 edp_phy_aux_cfg_v5[10] = { + 0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03 +}; + static int qcom_edp_phy_init(struct phy *phy) { struct qcom_edp *edp = phy_get_drvdata(phy); @@ -520,6 +559,13 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = { .com_configure_ssc = qcom_edp_com_configure_ssc_v4, }; +static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { + .is_edp = false, + .aux_cfg = edp_phy_aux_cfg_v5, + .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v5, + .ver_ops = &qcom_edp_phy_ops_v4, +}; + static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { .aux_cfg = edp_phy_aux_cfg_v4, .ver_ops = &qcom_edp_phy_ops_v4, @@ -1114,6 +1160,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) } static const struct of_device_id qcom_edp_phy_match_table[] = { + { .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, }, { .compatible = "qcom,sc7280-edp-phy", .data = &sc7280_dp_phy_cfg, }, { .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, }, { .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, },
Add support for eDP PHY v5 found on the Qualcomm SA8775P platform. Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com> --- drivers/phy/qualcomm/phy-qcom-edp.c | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)