| Message ID | 20240912080248.1133061-3-damon.ding@rock-chips.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for RK3588S Evaluation board | expand |
On 2024-09-12 10:02, Damon Ding wrote: > RK3588S EVB1 board features: > - Rockchip RK3588S > - PMIC: RK806-2x2pcs+DiscretePower > - RAM: LPDDR4/4x 2pcsx 32bit > - ROM: eMMC5.1+ SPI Falsh > > Add support for pmic, eMMC, SD-card, USB, PCIE and audio. > > Signed-off-by: Damon Ding <damon.ding@rock-chips.com> > --- > > Changes in v2: > - rename amplifier nodes to amplifier-headphone and amplifier-speaker > - sort audio and backlight nodes by node name > - format names of regulator nodes to regulator-* > - add CPU/memory regulator coupling > - fix "VOP-" to "VOL-" in commit message > - remove bootargs property in chosen node > > Changes in v3: > - remove unevaluated properties: > pcie@fe190000: 'rockchip,skip-scan-in-resume' > pmic@1: regulators: dcdc-reg*: 'regulator-init-microvolt' > phy@fed80000: 'svid' > > Change in v4: > - remove unexpected property bootargs which added by mistake in v3 > - add cd-gpios property in sdmmc node > - enable combphy2_psu for pcie2x1l1 > - improve commit message > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 1129 +++++++++++++++++ > 2 files changed, 1130 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index fda1b980eb4b..f2992da01ada 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-evb1-v10.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts > new file mode 100644 > index 000000000000..43decc6698e7 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts > @@ -0,0 +1,1129 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. > + * > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/usb/pd.h> > +#include "rk3588s.dtsi" > + > +/ { > + model = "Rockchip RK3588S EVB1 V10 Board"; > + compatible = "rockchip,rk3588s-evb1-v10", "rockchip,rk3588s"; > + [snip] > + > + vbus5v0_typec: regulator-vbus5v0-typec { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; Please use the gpios prop consistently in this file. > + pinctrl-names = "default"; > + pinctrl-0 = <&typec5v_pwren>; > + regulator-name = "vbus5v0_typec"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_usb>; > + }; > + > + vcc12v_dcin: regulator-vcc12v-dcin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc3v3_lcd_edp: regulator-vcc3v3-lcd-edp { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>; Same. > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc3v3_lcd_edp_en>; > + regulator-name = "vcc3v3_lcd_edp"; > + regulator-boot-on; > + vin-supply = <&vcc_3v3_s3>; > + }; > + > + vcc3v3_pcie20: regulator-vcc3v3-pcie20 { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc3v3_pcie20_en>; > + regulator-name = "vcc3v3_pcie20"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vcc5v0_host: regulator-vcc5v0-host { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; Same. > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_usb>; > + }; > + > + vcc5v0_sys: regulator-vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vcc5v0_usb: regulator-vcc5v0-usb { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_usb"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_usbdcin>; > + }; > + > + vcc5v0_usbdcin: regulator-vcc5v0-usbdcin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_usbdcin"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > +}; > + > +&combphy0_ps { > + status = "okay"; > +}; > + > +&combphy2_psu { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > + > + es8388: audio-codec@11 { > + compatible = "everest,es8388"; > + reg = <0x11>; > + clocks = <&cru I2S0_8CH_MCLKOUT>; > + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; > + assigned-clock-rates = <12288000>; > + AVDD-supply = <&avcc_1v8_s0>; > + DVDD-supply = <&avcc_1v8_s0>; > + HPVDD-supply = <&vcc_3v3_s0>; > + PVDD-supply = <&vcc_3v3_s0>; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&i2c8 { > + status = "okay"; status should be last prop before child nodes. > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c8m2_xfer>; > + > + usbc0: usb-typec@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usbc0_int>; > + vbus-supply = <&vbus5v0_typec>; > + status = "okay"; status prop is not needed here. > + > + usb_con: connector { > + compatible = "usb-c-connector"; > + label = "USB-C"; > + data-role = "dual"; > + op-sink-microwatt = <1000000>; > + power-role = "dual"; > + sink-pdos = > + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; > + source-pdos = > + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; > + try-power-role = "source"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + usbc0_orien_sw: endpoint { > + remote-endpoint = <&usbdp_phy0_orientation_switch>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + usbc0_role_sw: endpoint { > + remote-endpoint = <&dwc3_0_role_switch>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + dp_altmode_mux: endpoint { > + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; > + }; > + }; > + }; > + }; > + }; > + > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + #clock-cells = <0>; > + clock-output-names = "hym8563"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hym8563_int>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; > + wakeup-source; > + }; > +}; > + > +&pcie2x1l1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie2_1_rst>; Should probably also include clkreqn and waken pins. > + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; > + vpcie3v3-supply = <&vcc3v3_pcie20>; > + status = "okay"; > +}; > + > +&pcie2x1l2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie2_2_rst>; Same. > + reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&pinctrl { > + audio { > + hp_detect: headphone-detect { > + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + headphone_amplifier_en: headphone-amplifier-en { > + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + speaker_amplifier_en: speaker-amplifier-en { > + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + hym8563 { > + hym8563_int: hym8563-int { > + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + lcd-edp { > + vcc3v3_lcd_edp_en: vcc3v3-lcd-edp-en { > + rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie2 { > + pcie2_1_rst: pcie2-1-rst { > + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + pcie2_2_rst: pcie2-2-rst { > + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + vcc3v3_pcie20_en: vcc3v3-pcie20-en { > + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + typec5v_pwren: typec5v-pwren { > + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + usbc0_int: usbc0-int { > + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > +}; > + > +&pwm12 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcc_1v8_s0>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + no-sdio; > + no-sd; > + non-removable; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; Probably not needed with no-mmc prop. > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > + disable-wp; > + max-frequency = <150000000>; > + no-sdio; > + no-mmc; Please sort alphabetically, no-mmc before no-sdio, > + vmmc-supply = <&vcc_3v3_sd_s0>; > + vqmmc-supply = <&vccio_sd_s0>; > + sd-uhs-sdr104; and sd-uhs-sdr104 before vmmc-supply. > + status = "okay"; > +}; > + > +&spi2 { > + assigned-clocks = <&cru CLK_SPI2>; > + assigned-clock-rates = <200000000>; > + num-cs = <2>; > + status = "okay"; > + > + pmic@0 { > + compatible = "rockchip,rk806"; > + reg = <0x0>; > + #gpio-cells = <2>; > + gpio-controller; > + interrupt-parent = <&gpio0>; > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; Should probably use RK_PA7 and not a plain 7. > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, > + <&rk806_dvs2_null>, <&rk806_dvs3_null>; > + spi-max-frequency = <1000000>; > + system-power-controller; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc5-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc5v0_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc_2v0_pldo_s3>; > + vcc12-supply = <&vcc5v0_sys>; > + vcc13-supply = <&vcc5v0_sys>; > + vcc14-supply = <&vcc_1v1_nldo_s3>; > + vcca-supply = <&vcc5v0_sys>; > + > + rk806_dvs1_null: dvs1-null-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs2_null: dvs2-null-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs3_null: dvs3-null-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun0"; > + }; > + > + regulators { > + vdd_gpu_s0: dcdc-reg1 { > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <400>; > + regulator-name = "vdd_gpu_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_npu_s0: dcdc-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_npu_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_log_s0: dcdc-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_log_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdd_vdenc_s0: dcdc-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_vdenc_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu_mem_s0: dcdc-reg5 { > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <400>; > + regulator-name = "vdd_gpu_mem_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_npu_mem_s0: dcdc-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_npu_mem_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_2v0_pldo_s3: dcdc-reg7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_2v0_pldo_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <2000000>; > + }; > + }; > + > + vdd_vdenc_mem_s0: dcdc-reg8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_vdenc_mem_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd2_ddr_s3: dcdc-reg9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vdd2_ddr_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v1_nldo_s3: dcdc-reg10 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_1v1_nldo_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1100000>; > + }; > + }; > + > + avcc_1v8_s0: pldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "avcc_1v8_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd1_1v8_ddr_s3: pldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd1_1v8_ddr_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_1v8_s3: pldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_1v8_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_3v3_s0: pldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_3v3_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd_s0: pldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vccio_sd_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + master_pldo6_s3: pldo-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "master_pldo6_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_0v75_s3: nldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_0v75_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdd2l_0v9_ddr_s3: nldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdd2l_0v9_ddr_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <900000>; > + }; > + }; > + > + master_nldo3: nldo-reg3 { > + regulator-name = "master_nldo3"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + avdd_0v75_s0: nldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "avdd_0v75_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_0v85_s0: nldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdd_0v85_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + pmic@1 { > + compatible = "rockchip,rk806"; > + reg = <0x01>; > + #gpio-cells = <2>; > + gpio-controller; > + interrupt-parent = <&gpio0>; > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; Should probably use RK_PA7 and not a plain 7. > + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, > + <&rk806_slave_dvs3_null>; > + pinctrl-names = "default"; Inconsistent order of pinctrl-names and pinctrl-0 compared to rest of file. > + spi-max-frequency = <1000000>; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc5-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc5v0_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc_2v0_pldo_s3>; > + vcc12-supply = <&vcc5v0_sys>; > + vcc13-supply = <&vcc_1v1_nldo_s3>; > + vcc14-supply = <&vcc_2v0_pldo_s3>; > + vcca-supply = <&vcc5v0_sys>; > + > + rk806_slave_dvs1_null: dvs1-null-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun0"; > + }; > + > + rk806_slave_dvs2_null: dvs2-null-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun0"; > + }; > + > + rk806_slave_dvs3_null: dvs3-null-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun0"; > + }; > + > + regulators { > + vdd_cpu_big1_s0: dcdc-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-coupled-with = <&vdd_cpu_big1_mem_s0>; > + regulator-coupled-max-spread = <10000>; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_big1_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_big0_s0: dcdc-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-coupled-with = <&vdd_cpu_big0_mem_s0>; > + regulator-coupled-max-spread = <10000>; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_big0_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_lit_s0: dcdc-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-coupled-with = <&vdd_cpu_lit_mem_s0>; > + regulator-coupled-max-spread = <10000>; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_lit_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3_s3: dcdc-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_3v3_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vdd_cpu_big1_mem_s0: dcdc-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-coupled-with = <&vdd_cpu_big1_s0>; > + regulator-coupled-max-spread = <10000>; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_big1_mem_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + > + vdd_cpu_big0_mem_s0: dcdc-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-coupled-with = <&vdd_cpu_big0_s0>; > + regulator-coupled-max-spread = <10000>; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <1050000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_big0_mem_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_s0: dcdc-reg7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_1v8_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_lit_mem_s0: dcdc-reg8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-coupled-with = <&vdd_cpu_lit_s0>; > + regulator-coupled-max-spread = <10000>; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <950000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_cpu_lit_mem_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vddq_ddr_s0: dcdc-reg9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vddq_ddr_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_ddr_s0: dcdc-reg10 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <675000>; > + regulator-max-microvolt = <900000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_ddr_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_cam_s0: pldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_1v8_cam_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + avdd1v8_ddr_pll_s0: pldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "avdd1v8_ddr_pll_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_1v8_pll_s0: pldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_1v8_pll_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3_sd_s0: pldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_3v3_sd_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_2v8_cam_s0: pldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vcc_2v8_cam_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + pldo6_s3: pldo-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "pldo6_s3"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_0v75_pll_s0: nldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "vdd_0v75_pll_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_ddr_pll_s0: nldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdd_ddr_pll_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + slave_nldo3: nldo-reg3 { > + regulator-name = "slave_nldo3"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + avdd_1v2_cam_s0: nldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "avdd_1v2_cam_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + avdd_1v2_s0: nldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-ramp-delay = <12500>; > + regulator-name = "avdd_1v2_s0"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&tsadc { > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > +}; > + > +&u2phy2 { > + status = "okay"; > +}; > + > +&u2phy3 { > + status = "okay"; > +}; > + > +&u2phy0_otg { > + status = "okay"; > +}; > + > +&u2phy2_host { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > +}; > + > +&u2phy3_host { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-0 = <&uart2m0_xfer>; Missing pinctrl-names prop. > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host0_xhci { > + dr_mode = "otg"; This is already default for usb_host0_xhci. Regards, Jonas > + usb-role-switch; > + status = "okay"; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + dwc3_0_role_switch: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&usbc0_role_sw>; > + }; > + }; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdp_phy0 { > + mode-switch; > + orientation-switch; > + sbu1-dc-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; > + sbu2-dc-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + usbdp_phy0_orientation_switch: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&usbc0_orien_sw>; > + }; > + > + usbdp_phy0_dp_altmode_mux: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&dp_altmode_mux>; > + }; > + }; > +};
Hi Jonas: On 2024/9/12 20:21, Jonas Karlman wrote: > On 2024-09-12 10:02, Damon Ding wrote: >> RK3588S EVB1 board features: >> - Rockchip RK3588S >> - PMIC: RK806-2x2pcs+DiscretePower >> - RAM: LPDDR4/4x 2pcsx 32bit >> - ROM: eMMC5.1+ SPI Falsh >> >> Add support for pmic, eMMC, SD-card, USB, PCIE and audio. >> >> Signed-off-by: Damon Ding <damon.ding@rock-chips.com> >> --- >> >> Changes in v2: >> - rename amplifier nodes to amplifier-headphone and amplifier-speaker >> - sort audio and backlight nodes by node name >> - format names of regulator nodes to regulator-* >> - add CPU/memory regulator coupling >> - fix "VOP-" to "VOL-" in commit message >> - remove bootargs property in chosen node >> >> Changes in v3: >> - remove unevaluated properties: >> pcie@fe190000: 'rockchip,skip-scan-in-resume' >> pmic@1: regulators: dcdc-reg*: 'regulator-init-microvolt' >> phy@fed80000: 'svid' >> >> Change in v4: >> - remove unexpected property bootargs which added by mistake in v3 >> - add cd-gpios property in sdmmc node >> - enable combphy2_psu for pcie2x1l1 >> - improve commit message >> >> arch/arm64/boot/dts/rockchip/Makefile | 1 + >> .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 1129 +++++++++++++++++ >> 2 files changed, 1130 insertions(+) >> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts >> >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile >> index fda1b980eb4b..f2992da01ada 100644 >> --- a/arch/arm64/boot/dts/rockchip/Makefile >> +++ b/arch/arm64/boot/dts/rockchip/Makefile >> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-evb1-v10.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb >> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts >> new file mode 100644 >> index 000000000000..43decc6698e7 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts >> @@ -0,0 +1,1129 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. >> + * >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/input/input.h> >> +#include <dt-bindings/pinctrl/rockchip.h> >> +#include <dt-bindings/usb/pd.h> >> +#include "rk3588s.dtsi" >> + >> +/ { >> + model = "Rockchip RK3588S EVB1 V10 Board"; >> + compatible = "rockchip,rk3588s-evb1-v10", "rockchip,rk3588s"; >> + > > [snip] > >> + >> + vbus5v0_typec: regulator-vbus5v0-typec { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; > > Please use the gpios prop consistently in this file. I will update accordingly. > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&typec5v_pwren>; >> + regulator-name = "vbus5v0_typec"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc5v0_usb>; >> + }; >> + >> + vcc12v_dcin: regulator-vcc12v-dcin { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc12v_dcin"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <12000000>; >> + regulator-max-microvolt = <12000000>; >> + }; >> + >> + vcc3v3_lcd_edp: regulator-vcc3v3-lcd-edp { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>; > > Same. > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc3v3_lcd_edp_en>; >> + regulator-name = "vcc3v3_lcd_edp"; >> + regulator-boot-on; >> + vin-supply = <&vcc_3v3_s3>; >> + }; >> + >> + vcc3v3_pcie20: regulator-vcc3v3-pcie20 { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc3v3_pcie20_en>; >> + regulator-name = "vcc3v3_pcie20"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + startup-delay-us = <5000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vcc5v0_host: regulator-vcc5v0-host { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; > > Same. > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc5v0_host_en>; >> + regulator-name = "vcc5v0_host"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc5v0_usb>; >> + }; >> + >> + vcc5v0_sys: regulator-vcc5v0-sys { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vcc5v0_usb: regulator-vcc5v0-usb { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_usb"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc5v0_usbdcin>; >> + }; >> + >> + vcc5v0_usbdcin: regulator-vcc5v0-usbdcin { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_usbdcin"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> +}; >> + >> +&combphy0_ps { >> + status = "okay"; >> +}; >> + >> +&combphy2_psu { >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + status = "okay"; >> + >> + es8388: audio-codec@11 { >> + compatible = "everest,es8388"; >> + reg = <0x11>; >> + clocks = <&cru I2S0_8CH_MCLKOUT>; >> + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; >> + assigned-clock-rates = <12288000>; >> + AVDD-supply = <&avcc_1v8_s0>; >> + DVDD-supply = <&avcc_1v8_s0>; >> + HPVDD-supply = <&vcc_3v3_s0>; >> + PVDD-supply = <&vcc_3v3_s0>; >> + #sound-dai-cells = <0>; >> + }; >> +}; >> + >> +&i2c8 { >> + status = "okay"; > > status should be last prop before child nodes. I'll fix it in next version. > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2c8m2_xfer>; >> + >> + usbc0: usb-typec@22 { >> + compatible = "fcs,fusb302"; >> + reg = <0x22>; >> + interrupt-parent = <&gpio0>; >> + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&usbc0_int>; >> + vbus-supply = <&vbus5v0_typec>; >> + status = "okay"; > > status prop is not needed here. I appreciate your advice and plan to follow it. > >> + >> + usb_con: connector { >> + compatible = "usb-c-connector"; >> + label = "USB-C"; >> + data-role = "dual"; >> + op-sink-microwatt = <1000000>; >> + power-role = "dual"; >> + sink-pdos = >> + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; >> + source-pdos = >> + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; >> + try-power-role = "source"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + >> + usbc0_orien_sw: endpoint { >> + remote-endpoint = <&usbdp_phy0_orientation_switch>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + >> + usbc0_role_sw: endpoint { >> + remote-endpoint = <&dwc3_0_role_switch>; >> + }; >> + }; >> + >> + port@2 { >> + reg = <2>; >> + >> + dp_altmode_mux: endpoint { >> + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; >> + }; >> + }; >> + }; >> + }; >> + }; >> + >> + hym8563: rtc@51 { >> + compatible = "haoyu,hym8563"; >> + reg = <0x51>; >> + #clock-cells = <0>; >> + clock-output-names = "hym8563"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hym8563_int>; >> + interrupt-parent = <&gpio0>; >> + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; >> + wakeup-source; >> + }; >> +}; >> + >> +&pcie2x1l1 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pcie2_1_rst>; > > Should probably also include clkreqn and waken pins. I have tested the PCIE with an NVMe SSD, and it works with these two pins in their default settings. > >> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; >> + vpcie3v3-supply = <&vcc3v3_pcie20>; >> + status = "okay"; >> +}; >> + >> +&pcie2x1l2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pcie2_2_rst>; > > Same. > >> + reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>; >> + status = "okay"; >> +}; >> + >> +&pinctrl { >> + audio { >> + hp_detect: headphone-detect { >> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + headphone_amplifier_en: headphone-amplifier-en { >> + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + speaker_amplifier_en: speaker-amplifier-en { >> + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + hym8563 { >> + hym8563_int: hym8563-int { >> + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + lcd-edp { >> + vcc3v3_lcd_edp_en: vcc3v3-lcd-edp-en { >> + rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + pcie2 { >> + pcie2_1_rst: pcie2-1-rst { >> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + pcie2_2_rst: pcie2-2-rst { >> + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + vcc3v3_pcie20_en: vcc3v3-pcie20-en { >> + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + usb { >> + vcc5v0_host_en: vcc5v0-host-en { >> + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + usb-typec { >> + typec5v_pwren: typec5v-pwren { >> + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + usbc0_int: usbc0-int { >> + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> +}; >> + >> +&pwm12 { >> + status = "okay"; >> +}; >> + >> +&saradc { >> + vref-supply = <&vcc_1v8_s0>; >> + status = "okay"; >> +}; >> + >> +&sdhci { >> + bus-width = <8>; >> + mmc-hs400-1_8v; >> + mmc-hs400-enhanced-strobe; >> + no-sdio; >> + no-sd; >> + non-removable; >> + status = "okay"; >> +}; >> + >> +&sdmmc { >> + bus-width = <4>; >> + cap-mmc-highspeed; > > Probably not needed with no-mmc prop. The board only supports SD-card for this device, and the no-mmc prop will make it clearer. > >> + cap-sd-highspeed; >> + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; >> + disable-wp; >> + max-frequency = <150000000>; >> + no-sdio; >> + no-mmc; > > Please sort alphabetically, no-mmc before no-sdio, I'll sort these properties alphabetically in next version. > >> + vmmc-supply = <&vcc_3v3_sd_s0>; >> + vqmmc-supply = <&vccio_sd_s0>; >> + sd-uhs-sdr104; > > and sd-uhs-sdr104 before vmmc-supply. > >> + status = "okay"; >> +}; >> + >> +&spi2 { >> + assigned-clocks = <&cru CLK_SPI2>; >> + assigned-clock-rates = <200000000>; >> + num-cs = <2>; >> + status = "okay"; >> + >> + pmic@0 { >> + compatible = "rockchip,rk806"; >> + reg = <0x0>; >> + #gpio-cells = <2>; >> + gpio-controller; >> + interrupt-parent = <&gpio0>; >> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > > Should probably use RK_PA7 and not a plain 7. Indeed, I will fix it. > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, >> + <&rk806_dvs2_null>, <&rk806_dvs3_null>; >> + spi-max-frequency = <1000000>; >> + system-power-controller; >> + >> + vcc1-supply = <&vcc5v0_sys>; >> + vcc2-supply = <&vcc5v0_sys>; >> + vcc3-supply = <&vcc5v0_sys>; >> + vcc4-supply = <&vcc5v0_sys>; >> + vcc5-supply = <&vcc5v0_sys>; >> + vcc6-supply = <&vcc5v0_sys>; >> + vcc7-supply = <&vcc5v0_sys>; >> + vcc8-supply = <&vcc5v0_sys>; >> + vcc9-supply = <&vcc5v0_sys>; >> + vcc10-supply = <&vcc5v0_sys>; >> + vcc11-supply = <&vcc_2v0_pldo_s3>; >> + vcc12-supply = <&vcc5v0_sys>; >> + vcc13-supply = <&vcc5v0_sys>; >> + vcc14-supply = <&vcc_1v1_nldo_s3>; >> + vcca-supply = <&vcc5v0_sys>; >> + >> + rk806_dvs1_null: dvs1-null-pins { >> + pins = "gpio_pwrctrl1"; >> + function = "pin_fun0"; >> + }; >> + >> + rk806_dvs2_null: dvs2-null-pins { >> + pins = "gpio_pwrctrl2"; >> + function = "pin_fun0"; >> + }; >> + >> + rk806_dvs3_null: dvs3-null-pins { >> + pins = "gpio_pwrctrl3"; >> + function = "pin_fun0"; >> + }; >> + >> + regulators { >> + vdd_gpu_s0: dcdc-reg1 { >> + regulator-boot-on; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-enable-ramp-delay = <400>; >> + regulator-name = "vdd_gpu_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_npu_s0: dcdc-reg2 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_npu_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_log_s0: dcdc-reg3 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_log_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + regulator-suspend-microvolt = <750000>; >> + }; >> + }; >> + >> + vdd_vdenc_s0: dcdc-reg4 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_vdenc_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_gpu_mem_s0: dcdc-reg5 { >> + regulator-boot-on; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-enable-ramp-delay = <400>; >> + regulator-name = "vdd_gpu_mem_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_npu_mem_s0: dcdc-reg6 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_npu_mem_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_2v0_pldo_s3: dcdc-reg7 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <2000000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_2v0_pldo_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <2000000>; >> + }; >> + }; >> + >> + vdd_vdenc_mem_s0: dcdc-reg8 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_vdenc_mem_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd2_ddr_s3: dcdc-reg9 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-name = "vdd2_ddr_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + }; >> + }; >> + >> + vcc_1v1_nldo_s3: dcdc-reg10 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1100000>; >> + regulator-max-microvolt = <1100000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_1v1_nldo_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1100000>; >> + }; >> + }; >> + >> + avcc_1v8_s0: pldo-reg1 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "avcc_1v8_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd1_1v8_ddr_s3: pldo-reg2 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd1_1v8_ddr_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vcc_1v8_s3: pldo-reg3 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_1v8_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vcc_3v3_s0: pldo-reg4 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_3v3_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vccio_sd_s0: pldo-reg5 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vccio_sd_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + master_pldo6_s3: pldo-reg6 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-name = "master_pldo6_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vdd_0v75_s3: nldo-reg1 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <750000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_0v75_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <750000>; >> + }; >> + }; >> + >> + vdd2l_0v9_ddr_s3: nldo-reg2 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <900000>; >> + regulator-name = "vdd2l_0v9_ddr_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <900000>; >> + }; >> + }; >> + >> + master_nldo3: nldo-reg3 { >> + regulator-name = "master_nldo3"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + avdd_0v75_s0: nldo-reg4 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <750000>; >> + regulator-name = "avdd_0v75_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_0v85_s0: nldo-reg5 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <850000>; >> + regulator-max-microvolt = <850000>; >> + regulator-name = "vdd_0v85_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + }; >> + }; >> + >> + pmic@1 { >> + compatible = "rockchip,rk806"; >> + reg = <0x01>; >> + #gpio-cells = <2>; >> + gpio-controller; >> + interrupt-parent = <&gpio0>; >> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > > Should probably use RK_PA7 and not a plain 7. > >> + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, >> + <&rk806_slave_dvs3_null>; >> + pinctrl-names = "default"; > > Inconsistent order of pinctrl-names and pinctrl-0 compared to rest of file. I will put pinctrl-names before pinctrl-0. > >> + spi-max-frequency = <1000000>; >> + >> + vcc1-supply = <&vcc5v0_sys>; >> + vcc2-supply = <&vcc5v0_sys>; >> + vcc3-supply = <&vcc5v0_sys>; >> + vcc4-supply = <&vcc5v0_sys>; >> + vcc5-supply = <&vcc5v0_sys>; >> + vcc6-supply = <&vcc5v0_sys>; >> + vcc7-supply = <&vcc5v0_sys>; >> + vcc8-supply = <&vcc5v0_sys>; >> + vcc9-supply = <&vcc5v0_sys>; >> + vcc10-supply = <&vcc5v0_sys>; >> + vcc11-supply = <&vcc_2v0_pldo_s3>; >> + vcc12-supply = <&vcc5v0_sys>; >> + vcc13-supply = <&vcc_1v1_nldo_s3>; >> + vcc14-supply = <&vcc_2v0_pldo_s3>; >> + vcca-supply = <&vcc5v0_sys>; >> + >> + rk806_slave_dvs1_null: dvs1-null-pins { >> + pins = "gpio_pwrctrl1"; >> + function = "pin_fun0"; >> + }; >> + >> + rk806_slave_dvs2_null: dvs2-null-pins { >> + pins = "gpio_pwrctrl2"; >> + function = "pin_fun0"; >> + }; >> + >> + rk806_slave_dvs3_null: dvs3-null-pins { >> + pins = "gpio_pwrctrl3"; >> + function = "pin_fun0"; >> + }; >> + >> + regulators { >> + vdd_cpu_big1_s0: dcdc-reg1 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-coupled-with = <&vdd_cpu_big1_mem_s0>; >> + regulator-coupled-max-spread = <10000>; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <1050000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_cpu_big1_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_cpu_big0_s0: dcdc-reg2 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-coupled-with = <&vdd_cpu_big0_mem_s0>; >> + regulator-coupled-max-spread = <10000>; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <1050000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_cpu_big0_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_cpu_lit_s0: dcdc-reg3 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-coupled-with = <&vdd_cpu_lit_mem_s0>; >> + regulator-coupled-max-spread = <10000>; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_cpu_lit_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_3v3_s3: dcdc-reg4 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_3v3_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <3300000>; >> + }; >> + }; >> + >> + vdd_cpu_big1_mem_s0: dcdc-reg5 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-coupled-with = <&vdd_cpu_big1_s0>; >> + regulator-coupled-max-spread = <10000>; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <1050000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_cpu_big1_mem_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + >> + vdd_cpu_big0_mem_s0: dcdc-reg6 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-coupled-with = <&vdd_cpu_big0_s0>; >> + regulator-coupled-max-spread = <10000>; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <1050000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_cpu_big0_mem_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_1v8_s0: dcdc-reg7 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_1v8_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_cpu_lit_mem_s0: dcdc-reg8 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-coupled-with = <&vdd_cpu_lit_s0>; >> + regulator-coupled-max-spread = <10000>; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <950000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_cpu_lit_mem_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vddq_ddr_s0: dcdc-reg9 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-name = "vddq_ddr_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_ddr_s0: dcdc-reg10 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <675000>; >> + regulator-max-microvolt = <900000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_ddr_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_1v8_cam_s0: pldo-reg1 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_1v8_cam_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + avdd1v8_ddr_pll_s0: pldo-reg2 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "avdd1v8_ddr_pll_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_1v8_pll_s0: pldo-reg3 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_1v8_pll_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_3v3_sd_s0: pldo-reg4 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_3v3_sd_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_2v8_cam_s0: pldo-reg5 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vcc_2v8_cam_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + pldo6_s3: pldo-reg6 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-name = "pldo6_s3"; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vdd_0v75_pll_s0: nldo-reg1 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <750000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "vdd_0v75_pll_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_ddr_pll_s0: nldo-reg2 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <850000>; >> + regulator-max-microvolt = <850000>; >> + regulator-name = "vdd_ddr_pll_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + slave_nldo3: nldo-reg3 { >> + regulator-name = "slave_nldo3"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + avdd_1v2_cam_s0: nldo-reg4 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "avdd_1v2_cam_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + avdd_1v2_s0: nldo-reg5 { >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-ramp-delay = <12500>; >> + regulator-name = "avdd_1v2_s0"; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + }; >> + }; >> +}; >> + >> +&tsadc { >> + status = "okay"; >> +}; >> + >> +&u2phy0 { >> + status = "okay"; >> +}; >> + >> +&u2phy2 { >> + status = "okay"; >> +}; >> + >> +&u2phy3 { >> + status = "okay"; >> +}; >> + >> +&u2phy0_otg { >> + status = "okay"; >> +}; >> + >> +&u2phy2_host { >> + phy-supply = <&vcc5v0_host>; >> + status = "okay"; >> +}; >> + >> +&u2phy3_host { >> + phy-supply = <&vcc5v0_host>; >> + status = "okay"; >> +}; >> + >> +&uart2 { >> + pinctrl-0 = <&uart2m0_xfer>; > > Missing pinctrl-names prop. Indeed, it is better to add pinctrl-names. > >> + status = "okay"; >> +}; >> + >> +&usb_host0_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_host0_ohci { >> + status = "okay"; >> +}; >> + >> +&usb_host0_xhci { >> + dr_mode = "otg"; > > This is already default for usb_host0_xhci. I will take your advice and remove it. > > Regards, > Jonas > >> + usb-role-switch; >> + status = "okay"; >> + >> + port { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + dwc3_0_role_switch: endpoint@0 { >> + reg = <0>; >> + remote-endpoint = <&usbc0_role_sw>; >> + }; >> + }; >> +}; >> + >> +&usb_host1_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_host1_ohci { >> + status = "okay"; >> +}; >> + >> +&usbdp_phy0 { >> + mode-switch; >> + orientation-switch; >> + sbu1-dc-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; >> + sbu2-dc-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>; >> + status = "okay"; >> + >> + port { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + usbdp_phy0_orientation_switch: endpoint@0 { >> + reg = <0>; >> + remote-endpoint = <&usbc0_orien_sw>; >> + }; >> + >> + usbdp_phy0_dp_altmode_mux: endpoint@1 { >> + reg = <1>; >> + remote-endpoint = <&dp_altmode_mux>; >> + }; >> + }; >> +}; > >
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..f2992da01ada 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts new file mode 100644 index 000000000000..43decc6698e7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts @@ -0,0 +1,1129 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Rockchip RK3588S EVB1 V10 Board"; + compatible = "rockchip,rk3588s-evb1-v10", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + + button-menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <890000>; + }; + + button-escape { + label = "Escape"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1235000>; + }; + }; + + amp_headphone: amplifier-headphone { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone_amplifier_en>; + sound-name-prefix = "Headphones Amplifier"; + }; + + amp_speaker: amplifier-speaker { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_amplifier_en>; + sound-name-prefix = "Speaker Amplifier"; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "RK3588 EVB1 Audio"; + simple-audio-card,aux-devs = <&_headphone>, <&_speaker>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,pin-switches = "Headphones", "Speaker"; + simple-audio-card,routing = + "Speaker Amplifier INL", "LOUT2", + "Speaker Amplifier INR", "ROUT2", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR", + "Headphones Amplifier INL", "LOUT1", + "Headphones Amplifier INR", "ROUT1", + "Headphones", "Headphones Amplifier OUTL", + "Headphones", "Headphones Amplifier OUTR", + "LINPUT1", "Onboard Microphone", + "RINPUT1", "Onboard Microphone", + "LINPUT2", "Microphone Jack", + "RINPUT2", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones", + "Speaker", "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc3v3_lcd_edp>; + pwms = <&pwm12 0 25000 0>; + }; + + combophy_avdd0v85: regulator-combophy-avdd0v85 { + compatible = "regulator-fixed"; + regulator-name = "combophy_avdd0v85"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + combophy_avdd1v8: regulator-combophy-avdd1v8 { + compatible = "regulator-fixed"; + regulator-name = "combophy_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + vbus5v0_typec: regulator-vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_lcd_edp: regulator-vcc3v3-lcd-edp { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_lcd_edp_en>; + regulator-name = "vcc3v3_lcd_edp"; + regulator-boot-on; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie20: regulator-vcc3v3-pcie20 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie20_en>; + regulator-name = "vcc3v3_pcie20"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + vcc5v0_usbdcin: regulator-vcc5v0-usbdcin { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + AVDD-supply = <&avcc_1v8_s0>; + DVDD-supply = <&avcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + #sound-dai-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8m2_xfer>; + + usbc0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec>; + status = "okay"; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_role_sw: endpoint { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + + port@2 { + reg = <2>; + + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie20>; + status = "okay"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_2_rst>; + reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + audio { + hp_detect: headphone-detect { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + headphone_amplifier_en: headphone-amplifier-en { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + speaker_amplifier_en: speaker-amplifier-en { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-edp { + vcc3v3_lcd_edp_en: vcc3v3-lcd-edp-en { + rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie2 { + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_2_rst: pcie2-2-rst { + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc3v3_pcie20_en: vcc3v3-pcie20-en { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm12 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + sd-uhs-sdr104; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <2>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + pmic@1 { + compatible = "rockchip,rk806"; + reg = <0x01>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, + <&rk806_slave_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_slave_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_slave_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_slave_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_cpu_big1_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_mem_s0>; + regulator-coupled-max-spread = <10000>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big0_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_mem_s0>; + regulator-coupled-max-spread = <10000>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_mem_s0>; + regulator-coupled-max-spread = <10000>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_cpu_big1_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_s0>; + regulator-coupled-max-spread = <10000>; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + + vdd_cpu_big0_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_s0>; + regulator-coupled-max-spread = <10000>; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_s0>; + regulator-coupled-max-spread = <10000>; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_cam_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd1v8_ddr_pll_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd1v8_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_1v8_pll_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_1v8_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v8_cam_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_2v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_pll_s0: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + slave_nldo3: nldo-reg3 { + regulator-name = "slave_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_cam_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +};
RK3588S EVB1 board features: - Rockchip RK3588S - PMIC: RK806-2x2pcs+DiscretePower - RAM: LPDDR4/4x 2pcsx 32bit - ROM: eMMC5.1+ SPI Falsh Add support for pmic, eMMC, SD-card, USB, PCIE and audio. Signed-off-by: Damon Ding <damon.ding@rock-chips.com> --- Changes in v2: - rename amplifier nodes to amplifier-headphone and amplifier-speaker - sort audio and backlight nodes by node name - format names of regulator nodes to regulator-* - add CPU/memory regulator coupling - fix "VOP-" to "VOL-" in commit message - remove bootargs property in chosen node Changes in v3: - remove unevaluated properties: pcie@fe190000: 'rockchip,skip-scan-in-resume' pmic@1: regulators: dcdc-reg*: 'regulator-init-microvolt' phy@fed80000: 'svid' Change in v4: - remove unexpected property bootargs which added by mistake in v3 - add cd-gpios property in sdmmc node - enable combphy2_psu for pcie2x1l1 - improve commit message arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 1129 +++++++++++++++++ 2 files changed, 1130 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts