| Message ID | 359914108b879e995d4a39de32a33310009f0fab.1719903904.git.Sandor.yu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ | expand |
Hi, There's still the scrambler issue we discussed on v15, but I have some more comments. On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > +enum drm_connector_status cdns_mhdp8501_detect(struct cdns_mhdp8501_device *mhdp) > +{ > + u8 hpd = 0xf; > + > + hpd = cdns_mhdp8501_read_hpd(mhdp); > + if (hpd == 1) > + return connector_status_connected; > + else if (hpd == 0) > + return connector_status_disconnected; > + > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > + return connector_status_unknown; > +} > + > +static void hotplug_work_func(struct work_struct *work) > +{ > + struct cdns_mhdp8501_device *mhdp = container_of(work, > + struct cdns_mhdp8501_device, > + hotplug_work.work); > + enum drm_connector_status status = cdns_mhdp8501_detect(mhdp); > + > + drm_bridge_hpd_notify(&mhdp->bridge, status); > + > + if (status == connector_status_connected) { > + /* Cable connected */ > + DRM_INFO("HDMI/DP Cable Plug In\n"); > + enable_irq(mhdp->irq[IRQ_OUT]); > + } else if (status == connector_status_disconnected) { > + /* Cable Disconnected */ > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > + enable_irq(mhdp->irq[IRQ_IN]); > + } > +} You shouldn't play with the interrupt being enabled here: hotplug interrupts should always enabled. If you can't for some reason, the reason should be documented in your driver. > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_init(mhdp->phy); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > + goto clk_disable; > + } > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_set_mode(mhdp->phy, phy_mode); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > + goto clk_disable; > + } Why do you need a shared mutex between the phy and HDMI controller? > +static enum drm_mode_status > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > + const struct drm_display_mode *mode, > + unsigned long long tmds_rate) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + union phy_configure_opts phy_cfg; > + int ret; > + > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret < 0) > + return MODE_CLOCK_RANGE; > + > + return MODE_OK; > +} > + > +static enum drm_mode_status > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + unsigned long long tmds_rate; > + > + /* We don't support double-clocked and Interlaced modes */ > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > + mode->flags & DRM_MODE_FLAG_INTERLACE) > + return MODE_BAD; > + > + /* MAX support pixel clock rate 594MHz */ > + if (mode->clock > 594000) > + return MODE_CLOCK_HIGH; This needs to be in the tmds_char_rate_valid function > + if (mode->hdisplay > 3840) > + return MODE_BAD_HVALUE; > + > + if (mode->vdisplay > 2160) > + return MODE_BAD_VVALUE; > + > + tmds_rate = mode->clock * 1000ULL; > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); It will already be called by the core so this is redundant. > +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_state) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + struct drm_atomic_state *state = old_state->base.state; > + struct drm_connector *connector; > + struct video_info *video = &mhdp->video_info; > + struct drm_crtc_state *crtc_state; > + struct drm_connector_state *conn_state; > + struct drm_display_mode *mode = &mhdp->mode; > + union phy_configure_opts phy_cfg; > + int ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, > + bridge->encoder); > + if (WARN_ON(!connector)) > + return; > + > + mhdp->curr_conn = connector; > + > + conn_state = drm_atomic_get_new_connector_state(state, connector); > + if (WARN_ON(!conn_state)) > + return; > + > + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); > + if (WARN_ON(!crtc_state)) > + return; > + > + video->color_fmt = conn_state->hdmi.output_format; > + video->bpc = conn_state->hdmi.output_bpc; > + > + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); Why do you need a copy of all these fields? You should pass the connector / bridge state around and not copy these fields. > + /* video mode check */ > + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == 0) > + return; This should be checked in atomic_check, but I'm pretty sure it's redundant. > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > + mode->hdisplay, mode->vdisplay, mode->clock); > + > + drm_atomic_helper_connector_hdmi_update_infoframes(connector, state); > + > + /* Line swapping */ > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping); > + > + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, > + mhdp->video_info.bpc, > + mhdp->video_info.color_fmt); The TMDS char rate is already available in the connector_state so there no need to recompute it. > + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; And you shouldn't store a copy either. > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_configure(mhdp->phy, &phy_cfg); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > + __func__, ret); > + return; > + } > + > + cdns_hdmi_sink_config(mhdp); > + > + ret = cdns_hdmi_ctrl_init(mhdp); > + if (ret < 0) { > + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); > + return; > + } > + > + /* Config GCP */ > + if (mhdp->video_info.bpc == 8) > + cdns_hdmi_disable_gcp(mhdp); > + else > + cdns_hdmi_enable_gcp(mhdp); > + > + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); > + if (ret < 0) { > + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking ret = %d\n", ret); > + return; > + } > +} > + > +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge *bridge, > + enum hdmi_infoframe_type type) > +{ > + return 0; > +} Either implement it or don't, but an empty function is dead code. > +static int cdns_hdmi_bridge_write_infoframe(struct drm_bridge *bridge, > + enum hdmi_infoframe_type type, > + const u8 *buffer, size_t len) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + switch (type) { > + case HDMI_INFOFRAME_TYPE_AVI: > + cdns_hdmi_config_infoframe(mhdp, 0, len, buffer, HDMI_INFOFRAME_TYPE_AVI); > + break; > + case HDMI_INFOFRAME_TYPE_SPD: > + cdns_hdmi_config_infoframe(mhdp, 1, len, buffer, HDMI_INFOFRAME_TYPE_SPD); > + break; > + case HDMI_INFOFRAME_TYPE_VENDOR: > + cdns_hdmi_config_infoframe(mhdp, 2, len, buffer, HDMI_INFOFRAME_TYPE_VENDOR); > + break; > + default: > + dev_dbg(mhdp->dev, "Unsupported infoframe type %x\n", type); > + } > + > + return 0; > +} > + > +static int cdns_hdmi_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + return drm_atomic_helper_connector_hdmi_check(conn_state->connector, conn_state->state); > +} You should also call your mode_valid function here. Maxime
Le 02/07/2024 à 14:22, Sandor Yu a écrit : > Add a new DRM DisplayPort and HDMI bridge driver for Candence MHDP8501 > used in i.MX8MQ SOC. MHDP8501 could support HDMI or DisplayPort > standards according embedded Firmware running in the uCPU. > > For iMX8MQ SOC, the DisplayPort/HDMI FW was loaded and activated by > SOC's ROM code. Bootload binary included respective specific firmware > is required. > > Driver will check display connector type and > then load the corresponding driver. > > Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > v15->v16: > - rebase the patchset sits on top Dmitry's > 'make use of the HDMI connector infrastructure' patchset ([2]). > - Add DRM_BRIDGE_OP_HDMI flags for HDMI driver, > - Introduce the hdmi info frame helper functions, added hdmi_clear_infoframe(), > hdmi_write_infoframe() and hdmi_tmds_char_rate_valid(). > - mode_fixup() was replaced by atomic_check(). > - Fix video mode 4Kp30 did not work on some displays that support > LTE_340Mcsc_scramble. > - updated for tmds_char_rate added in patch #2. > > v13->v14: > - Rebase to next-20240219, replace get_edid function by edid_read > function. > > v12->v13: > - Explicitly include linux/platform_device.h for cdns-mhdp8501-core.c > - Fix build warning > - Order bit bpc and color_space in descending shit. > > v11->v12: > - Replace DRM_INFO with dev_info or dev_warn. > - Replace DRM_ERROR with dev_err. > - Return ret when cdns_mhdp_dpcd_read failed in function cdns_dp_aux_transferi(). > - Remove unused parmeter in function cdns_dp_get_msa_misc > and use two separate variables for color space and bpc. > - Add year 2024 to copyright. > > drivers/gpu/drm/bridge/cadence/Kconfig | 16 + > drivers/gpu/drm/bridge/cadence/Makefile | 2 + > .../drm/bridge/cadence/cdns-mhdp8501-core.c | 330 +++++++++ > .../drm/bridge/cadence/cdns-mhdp8501-core.h | 367 +++++++++ > .../gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c | 700 ++++++++++++++++++ > .../drm/bridge/cadence/cdns-mhdp8501-hdmi.c | 595 +++++++++++++++ > 6 files changed, 2010 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > > diff --git a/drivers/gpu/drm/bridge/cadence/Kconfig b/drivers/gpu/drm/bridge/cadence/Kconfig > index e0973339e9e3..45848e741f5f 100644 > --- a/drivers/gpu/drm/bridge/cadence/Kconfig > +++ b/drivers/gpu/drm/bridge/cadence/Kconfig > @@ -51,3 +51,19 @@ config DRM_CDNS_MHDP8546_J721E > initializes the J721E Display Port and sets up the > clock and data muxes. > endif > + > +config DRM_CDNS_MHDP8501 > + tristate "Cadence MHDP8501 DP/HDMI bridge" > + select DRM_KMS_HELPER > + select DRM_PANEL_BRIDGE > + select DRM_DISPLAY_DP_HELPER > + select DRM_DISPLAY_HELPER > + select CDNS_MHDP_HELPER > + select DRM_CDNS_AUDIO > + depends on OF > + help > + Support Cadence MHDP8501 DisplayPort/HDMI bridge. > + Cadence MHDP8501 support one or more protocols, > + including DisplayPort and HDMI. > + To use the DP and HDMI drivers, their respective > + specific firmware is required. > diff --git a/drivers/gpu/drm/bridge/cadence/Makefile b/drivers/gpu/drm/bridge/cadence/Makefile > index 087dc074820d..02c1a9f3cf6f 100644 > --- a/drivers/gpu/drm/bridge/cadence/Makefile > +++ b/drivers/gpu/drm/bridge/cadence/Makefile > @@ -6,3 +6,5 @@ obj-$(CONFIG_CDNS_MHDP_HELPER) += cdns-mhdp-helper.o > obj-$(CONFIG_DRM_CDNS_MHDP8546) += cdns-mhdp8546.o > cdns-mhdp8546-y := cdns-mhdp8546-core.o cdns-mhdp8546-hdcp.o > cdns-mhdp8546-$(CONFIG_DRM_CDNS_MHDP8546_J721E) += cdns-mhdp8546-j721e.o > +obj-$(CONFIG_DRM_CDNS_MHDP8501) += cdns-mhdp8501.o > +cdns-mhdp8501-y := cdns-mhdp8501-core.o cdns-mhdp8501-dp.o cdns-mhdp8501-hdmi.o > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > new file mode 100644 > index 000000000000..c306db982b76 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > @@ -0,0 +1,330 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Cadence Display Port Interface (DP) driver > + * > + * Copyright (C) 2023, 2024 NXP Semiconductor, Inc. > + * > + */ > +#include <drm/drm_of.h> > +#include <drm/drm_print.h> > +#include <linux/clk.h> > +#include <linux/irq.h> > +#include <linux/mutex.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/phy/phy.h> > + > +#include "cdns-mhdp8501-core.h" > + > +static int cdns_mhdp8501_read_hpd(struct cdns_mhdp8501_device *mhdp) > +{ > + u8 status; > + int ret; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_GENERAL, > + GENERAL_GET_HPD_STATE, 0, NULL); > + if (ret) > + goto err_get_hpd; > + > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_GENERAL, > + GENERAL_GET_HPD_STATE, > + sizeof(status)); > + if (ret) > + goto err_get_hpd; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, &status, sizeof(status)); > + if (ret) > + goto err_get_hpd; > + > + mutex_unlock(&mhdp->mbox_mutex); > + > + return status; > + > +err_get_hpd: > + dev_err(mhdp->dev, "read hpd failed: %d\n", ret); > + mutex_unlock(&mhdp->mbox_mutex); > + > + return ret; > +} > + > +enum drm_connector_status cdns_mhdp8501_detect(struct cdns_mhdp8501_device *mhdp) > +{ > + u8 hpd = 0xf; > + > + hpd = cdns_mhdp8501_read_hpd(mhdp); > + if (hpd == 1) > + return connector_status_connected; > + else if (hpd == 0) > + return connector_status_disconnected; > + > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > + return connector_status_unknown; > +} > + > +static void hotplug_work_func(struct work_struct *work) > +{ > + struct cdns_mhdp8501_device *mhdp = container_of(work, > + struct cdns_mhdp8501_device, > + hotplug_work.work); > + enum drm_connector_status status = cdns_mhdp8501_detect(mhdp); > + > + drm_bridge_hpd_notify(&mhdp->bridge, status); > + > + if (status == connector_status_connected) { > + /* Cable connected */ > + DRM_INFO("HDMI/DP Cable Plug In\n"); > + enable_irq(mhdp->irq[IRQ_OUT]); > + } else if (status == connector_status_disconnected) { > + /* Cable Disconnected */ > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > + enable_irq(mhdp->irq[IRQ_IN]); > + } > +} > + > +static irqreturn_t cdns_mhdp8501_irq_thread(int irq, void *data) > +{ > + struct cdns_mhdp8501_device *mhdp = data; > + > + disable_irq_nosync(irq); > + > + mod_delayed_work(system_wq, &mhdp->hotplug_work, > + msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); > + > + return IRQ_HANDLED; > +} > + > +static int cdns_mhdp8501_dt_parse(struct cdns_mhdp8501_device *mhdp, > + struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *remote; > + > + remote = of_graph_get_remote_node(np, 1, 0); > + if (!remote) { > + dev_err(dev, "fail to get remote node\n"); > + of_node_put(remote); > + return -EINVAL; > + } > + > + /* get connector type */ > + if (of_device_is_compatible(remote, "hdmi-connector")) { > + mhdp->connector_type = DRM_MODE_CONNECTOR_HDMIA; > + > + } else if (of_device_is_compatible(remote, "dp-connector")) { > + mhdp->connector_type = DRM_MODE_CONNECTOR_DisplayPort; > + > + } else { > + dev_err(dev, "Unknown connector type\n"); > + of_node_put(remote); > + return -EINVAL; > + } > + > + of_node_put(remote); > + return true; > +} > + > +static void cdns_mhdp8501_add_bridge(struct cdns_mhdp8501_device *mhdp) > +{ > + mhdp->bridge.type = mhdp->connector_type; > + mhdp->bridge.driver_private = mhdp; > + mhdp->bridge.of_node = mhdp->dev->of_node; > + mhdp->bridge.vendor = "NXP"; > + mhdp->bridge.product = "i.MX8"; > + mhdp->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | > + DRM_BRIDGE_OP_HPD; > + > + if (mhdp->connector_type == DRM_MODE_CONNECTOR_HDMIA) { > + mhdp->bridge.funcs = &cdns_hdmi_bridge_funcs; > + mhdp->bridge.ops |= DRM_BRIDGE_OP_HDMI; > + } else if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { > + mhdp->bridge.funcs = &cdns_dp_bridge_funcs; > + } else { > + dev_err(mhdp->dev, "Unsupported connector type!\n"); > + return; > + } > + > + drm_bridge_add(&mhdp->bridge); > +} > + > +static int cdns_mhdp8501_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct cdns_mhdp8501_device *mhdp; > + struct resource *res; > + enum phy_mode phy_mode; > + u32 reg; > + int ret; > + > + mhdp = devm_kzalloc(dev, sizeof(*mhdp), GFP_KERNEL); > + if (!mhdp) > + return -ENOMEM; > + > + mutex_init(&mhdp->mbox_mutex); > + mhdp->dev = dev; > + > + INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) > + return -ENODEV; > + > + mhdp->regs = devm_ioremap(dev, res->start, resource_size(res)); > + if (IS_ERR(mhdp->regs)) > + return PTR_ERR(mhdp->regs); > + > + ret = cdns_mhdp8501_dt_parse(mhdp, pdev); > + if (ret < 0) > + return -EINVAL; > + > + mhdp->phy = devm_of_phy_get_by_index(dev, pdev->dev.of_node, 0); > + if (IS_ERR(mhdp->phy)) > + return dev_err_probe(dev, PTR_ERR(mhdp->phy), "no PHY configured\n"); > + > + mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in"); > + if (mhdp->irq[IRQ_IN] < 0) > + return dev_err_probe(dev, mhdp->irq[IRQ_IN], "No plug_in irq number\n"); > + > + mhdp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out"); > + if (mhdp->irq[IRQ_OUT] < 0) > + return dev_err_probe(dev, mhdp->irq[IRQ_OUT], "No plug_out irq number\n"); > + > + irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN); > + ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN], > + NULL, cdns_mhdp8501_irq_thread, > + IRQF_ONESHOT, dev_name(dev), mhdp); > + if (ret < 0) { > + dev_err(dev, "can't claim irq %d\n", mhdp->irq[IRQ_IN]); > + return -EINVAL; > + } > + > + irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN); > + ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT], > + NULL, cdns_mhdp8501_irq_thread, > + IRQF_ONESHOT, dev_name(dev), mhdp); > + if (ret < 0) { > + dev_err(dev, "can't claim irq %d\n", mhdp->irq[IRQ_OUT]); > + return -EINVAL; > + } > + > + /* set default lane mapping */ > + mhdp->lane_mapping = LANE_MAPPING_NORMAL; > + > + /* cdns_mhdp8501_dt_parse() ensures connector_type is valid */ > + mhdp->plat_data = of_device_get_match_data(dev); > + if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { > + mhdp->lane_mapping = mhdp->plat_data->dp_lane_mapping; > + phy_mode = PHY_MODE_DP; > + } else if (mhdp->connector_type == DRM_MODE_CONNECTOR_HDMIA) { > + mhdp->lane_mapping = mhdp->plat_data->hdmi_lane_mapping; > + phy_mode = PHY_MODE_HDMI; > + } On imx8mq-zii-ultra board lane mapping doesn't follow your default setting. Please add a "lane-mapping" property in the DT to allow to customized this setting for each board. You can make it optional and keep the default value when the property is missing on the DT node. Regards, Benjamin > + > + dev_set_drvdata(dev, mhdp); > + > + /* init base struct for access mhdp mailbox */ > + mhdp->base.dev = mhdp->dev; > + mhdp->base.regs = mhdp->regs; > + mhdp->base.mbox_mutex = &mhdp->mbox_mutex; > + > + if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { > + drm_dp_aux_init(&mhdp->dp.aux); > + mhdp->dp.aux.name = "mhdp8501_dp_aux"; > + mhdp->dp.aux.dev = dev; > + mhdp->dp.aux.transfer = cdns_dp_aux_transfer; > + } > + > + /* Enable APB clock */ > + mhdp->apb_clk = devm_clk_get(dev, NULL); > + if (IS_ERR(mhdp->apb_clk)) > + return dev_err_probe(dev, PTR_ERR(mhdp->apb_clk), > + "couldn't get apb clk\n"); > + > + clk_prepare_enable(mhdp->apb_clk); > + > + /* > + * Wait for the KEEP_ALIVE "message" on the first 8 bits. > + * Updated each sched "tick" (~2ms) > + */ > + ret = readl_poll_timeout(mhdp->regs + KEEP_ALIVE, reg, > + reg & CDNS_KEEP_ALIVE_MASK, 500, > + CDNS_KEEP_ALIVE_TIMEOUT); > + if (ret) { > + dev_err(dev, "device didn't give any life sign: reg %d\n", reg); > + goto clk_disable; > + } > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_init(mhdp->phy); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > + goto clk_disable; > + } > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_set_mode(mhdp->phy, phy_mode); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > + goto clk_disable; > + } > + > + /* Enable cable hotplug detect */ > + if (cdns_mhdp8501_read_hpd(mhdp)) > + enable_irq(mhdp->irq[IRQ_OUT]); > + else > + enable_irq(mhdp->irq[IRQ_IN]); > + > + cdns_mhdp8501_add_bridge(mhdp); > + > + return 0; > + > +clk_disable: > + clk_disable_unprepare(mhdp->apb_clk); > + > + return -EINVAL; > +} > + > +static void cdns_mhdp8501_remove(struct platform_device *pdev) > +{ > + struct cdns_mhdp8501_device *mhdp = platform_get_drvdata(pdev); > + > + if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) > + cdns_dp_aux_destroy(mhdp); > + > + drm_bridge_remove(&mhdp->bridge); > + clk_disable_unprepare(mhdp->apb_clk); > +} > + > +static struct mhdp8501_plat_data imx8mq_mhdp_drv_data = { > + .hdmi_lane_mapping = LANE_MAPPING_FLIPPED, > + .dp_lane_mapping = LANE_MAPPING_IMX8MQ_DP, > +}; > + > +static const struct of_device_id cdns_mhdp8501_dt_ids[] = { > + { .compatible = "fsl,imx8mq-mhdp8501", > + .data = &imx8mq_mhdp_drv_data > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, cdns_mhdp8501_dt_ids); > + > +static struct platform_driver cdns_mhdp8501_driver = { > + .probe = cdns_mhdp8501_probe, > + .remove = cdns_mhdp8501_remove, > + .driver = { > + .name = "cdns-mhdp8501", > + .of_match_table = cdns_mhdp8501_dt_ids, > + }, > +}; > + > +module_platform_driver(cdns_mhdp8501_driver); > + > +MODULE_AUTHOR("Sandor Yu <sandor.yu@nxp.com>"); > +MODULE_DESCRIPTION("Cadence MHDP8501 bridge driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > new file mode 100644 > index 000000000000..593071f36995 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > @@ -0,0 +1,367 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Cadence MHDP 8501 Common head file > + * > + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. > + * > + */ > + > +#ifndef _CDNS_MHDP8501_CORE_H_ > +#define _CDNS_MHDP8501_CORE_H_ > + > +#include <drm/bridge/cdns-mhdp-helper.h> > +#include <drm/drm_bridge.h> > +#include <drm/drm_connector.h> > +#include <drm/display/drm_dp_helper.h> > +#include <linux/bitops.h> > + > +#define ADDR_IMEM 0x10000 > +#define ADDR_DMEM 0x20000 > + > +/* APB CFG addr */ > +#define APB_CTRL 0 > +#define XT_INT_CTRL 0x04 > +#define MAILBOX_FULL_ADDR 0x08 > +#define MAILBOX_EMPTY_ADDR 0x0c > +#define MAILBOX0_WR_DATA 0x10 > +#define MAILBOX0_RD_DATA 0x14 > +#define KEEP_ALIVE 0x18 > +#define VER_L 0x1c > +#define VER_H 0x20 > +#define VER_LIB_L_ADDR 0x24 > +#define VER_LIB_H_ADDR 0x28 > +#define SW_DEBUG_L 0x2c > +#define SW_DEBUG_H 0x30 > +#define MAILBOX_INT_MASK 0x34 > +#define MAILBOX_INT_STATUS 0x38 > +#define SW_CLK_L 0x3c > +#define SW_CLK_H 0x40 > +#define SW_EVENTS0 0x44 > +#define SW_EVENTS1 0x48 > +#define SW_EVENTS2 0x4c > +#define SW_EVENTS3 0x50 > +#define XT_OCD_CTRL 0x60 > +#define APB_INT_MASK 0x6c > +#define APB_STATUS_MASK 0x70 > + > +/* Source phy comp */ > +#define PHY_DATA_SEL 0x0818 > +#define LANES_CONFIG 0x0814 > + > +/* Source CAR Addr */ > +#define SOURCE_HDTX_CAR 0x0900 > +#define SOURCE_DPTX_CAR 0x0904 > +#define SOURCE_PHY_CAR 0x0908 > +#define SOURCE_CEC_CAR 0x090c > +#define SOURCE_CBUS_CAR 0x0910 > +#define SOURCE_PKT_CAR 0x0918 > +#define SOURCE_AIF_CAR 0x091c > +#define SOURCE_CIPHER_CAR 0x0920 > +#define SOURCE_CRYPTO_CAR 0x0924 > + > +/* clock meters addr */ > +#define CM_CTRL 0x0a00 > +#define CM_I2S_CTRL 0x0a04 > +#define CM_SPDIF_CTRL 0x0a08 > +#define CM_VID_CTRL 0x0a0c > +#define CM_LANE_CTRL 0x0a10 > +#define I2S_NM_STABLE 0x0a14 > +#define I2S_NCTS_STABLE 0x0a18 > +#define SPDIF_NM_STABLE 0x0a1c > +#define SPDIF_NCTS_STABLE 0x0a20 > +#define NMVID_MEAS_STABLE 0x0a24 > +#define I2S_MEAS 0x0a40 > +#define SPDIF_MEAS 0x0a80 > +#define NMVID_MEAS 0x0ac0 > + > +/* source vif addr */ > +#define BND_HSYNC2VSYNC 0x0b00 > +#define HSYNC2VSYNC_F1_L1 0x0b04 > +#define HSYNC2VSYNC_STATUS 0x0b0c > +#define HSYNC2VSYNC_POL_CTRL 0x0b10 > + > +/* MHDP TX_top_comp */ > +#define SCHEDULER_H_SIZE 0x1000 > +#define SCHEDULER_V_SIZE 0x1004 > +#define HDTX_SIGNAL_FRONT_WIDTH 0x100c > +#define HDTX_SIGNAL_SYNC_WIDTH 0x1010 > +#define HDTX_SIGNAL_BACK_WIDTH 0x1014 > +#define HDTX_CONTROLLER 0x1018 > +#define HDTX_HPD 0x1020 > +#define HDTX_CLOCK_REG_0 0x1024 > +#define HDTX_CLOCK_REG_1 0x1028 > + > +/* DPTX hpd addr */ > +#define HPD_IRQ_DET_MIN_TIMER 0x2100 > +#define HPD_IRQ_DET_MAX_TIMER 0x2104 > +#define HPD_UNPLGED_DET_MIN_TIMER 0x2108 > +#define HPD_STABLE_TIMER 0x210c > +#define HPD_FILTER_TIMER 0x2110 > +#define HPD_EVENT_MASK 0x211c > +#define HPD_EVENT_DET 0x2120 > + > +/* DPTX framer addr */ > +#define DP_FRAMER_GLOBAL_CONFIG 0x2200 > +#define DP_SW_RESET 0x2204 > +#define DP_FRAMER_TU 0x2208 > +#define DP_FRAMER_PXL_REPR 0x220c > +#define DP_FRAMER_SP 0x2210 > +#define AUDIO_PACK_CONTROL 0x2214 > +#define DP_VC_TABLE(x) (0x2218 + ((x) << 2)) > +#define DP_VB_ID 0x2258 > +#define DP_MTPH_LVP_CONTROL 0x225c > +#define DP_MTPH_SYMBOL_VALUES 0x2260 > +#define DP_MTPH_ECF_CONTROL 0x2264 > +#define DP_MTPH_ACT_CONTROL 0x2268 > +#define DP_MTPH_STATUS 0x226c > +#define DP_INTERRUPT_SOURCE 0x2270 > +#define DP_INTERRUPT_MASK 0x2274 > +#define DP_FRONT_BACK_PORCH 0x2278 > +#define DP_BYTE_COUNT 0x227c > + > +/* DPTX stream addr */ > +#define MSA_HORIZONTAL_0 0x2280 > +#define MSA_HORIZONTAL_1 0x2284 > +#define MSA_VERTICAL_0 0x2288 > +#define MSA_VERTICAL_1 0x228c > +#define MSA_MISC 0x2290 > +#define STREAM_CONFIG 0x2294 > +#define AUDIO_PACK_STATUS 0x2298 > +#define VIF_STATUS 0x229c > +#define PCK_STUFF_STATUS_0 0x22a0 > +#define PCK_STUFF_STATUS_1 0x22a4 > +#define INFO_PACK_STATUS 0x22a8 > +#define RATE_GOVERNOR_STATUS 0x22ac > +#define DP_HORIZONTAL 0x22b0 > +#define DP_VERTICAL_0 0x22b4 > +#define DP_VERTICAL_1 0x22b8 > +#define DP_BLOCK_SDP 0x22bc > + > +/* DPTX glbl addr */ > +#define DPTX_LANE_EN 0x2300 > +#define DPTX_ENHNCD 0x2304 > +#define DPTX_INT_MASK 0x2308 > +#define DPTX_INT_STATUS 0x230c > + > +/* DP AUX Addr */ > +#define DP_AUX_HOST_CONTROL 0x2800 > +#define DP_AUX_INTERRUPT_SOURCE 0x2804 > +#define DP_AUX_INTERRUPT_MASK 0x2808 > +#define DP_AUX_SWAP_INVERSION_CONTROL 0x280c > +#define DP_AUX_SEND_NACK_TRANSACTION 0x2810 > +#define DP_AUX_CLEAR_RX 0x2814 > +#define DP_AUX_CLEAR_TX 0x2818 > +#define DP_AUX_TIMER_STOP 0x281c > +#define DP_AUX_TIMER_CLEAR 0x2820 > +#define DP_AUX_RESET_SW 0x2824 > +#define DP_AUX_DIVIDE_2M 0x2828 > +#define DP_AUX_TX_PREACHARGE_LENGTH 0x282c > +#define DP_AUX_FREQUENCY_1M_MAX 0x2830 > +#define DP_AUX_FREQUENCY_1M_MIN 0x2834 > +#define DP_AUX_RX_PRE_MIN 0x2838 > +#define DP_AUX_RX_PRE_MAX 0x283c > +#define DP_AUX_TIMER_PRESET 0x2840 > +#define DP_AUX_NACK_FORMAT 0x2844 > +#define DP_AUX_TX_DATA 0x2848 > +#define DP_AUX_RX_DATA 0x284c > +#define DP_AUX_TX_STATUS 0x2850 > +#define DP_AUX_RX_STATUS 0x2854 > +#define DP_AUX_RX_CYCLE_COUNTER 0x2858 > +#define DP_AUX_MAIN_STATES 0x285c > +#define DP_AUX_MAIN_TIMER 0x2860 > +#define DP_AUX_AFE_OUT 0x2864 > + > +/* source pif addr */ > +#define SOURCE_PIF_WR_ADDR 0x30800 > +#define SOURCE_PIF_WR_REQ 0x30804 > +#define SOURCE_PIF_RD_ADDR 0x30808 > +#define SOURCE_PIF_RD_REQ 0x3080c > +#define SOURCE_PIF_DATA_WR 0x30810 > +#define SOURCE_PIF_DATA_RD 0x30814 > +#define SOURCE_PIF_FIFO1_FLUSH 0x30818 > +#define SOURCE_PIF_FIFO2_FLUSH 0x3081c > +#define SOURCE_PIF_STATUS 0x30820 > +#define SOURCE_PIF_INTERRUPT_SOURCE 0x30824 > +#define SOURCE_PIF_INTERRUPT_MASK 0x30828 > +#define SOURCE_PIF_PKT_ALLOC_REG 0x3082c > +#define SOURCE_PIF_PKT_ALLOC_WR_EN 0x30830 > +#define SOURCE_PIF_SW_RESET 0x30834 > + > +#define LINK_TRAINING_NOT_ACTIV 0 > +#define LINK_TRAINING_RUN 1 > +#define LINK_TRAINING_RESTART 2 > + > +#define CONTROL_VIDEO_IDLE 0 > +#define CONTROL_VIDEO_VALID 1 > + > +#define INTERLACE_FMT_DET BIT(12) > +#define VIF_BYPASS_INTERLACE BIT(13) > +#define TU_CNT_RST_EN BIT(15) > +#define INTERLACE_DTCT_WIN 0x20 > + > +#define DP_FRAMER_SP_INTERLACE_EN BIT(2) > +#define DP_FRAMER_SP_HSP BIT(1) > +#define DP_FRAMER_SP_VSP BIT(0) > + > +/* Capability */ > +#define AUX_HOST_INVERT 3 > +#define FAST_LT_SUPPORT 1 > +#define FAST_LT_NOT_SUPPORT 0 > +#define LANE_MAPPING_NORMAL 0x1b > +#define LANE_MAPPING_FLIPPED 0xe4 > +#define LANE_MAPPING_IMX8MQ_DP 0xc6 > +#define ENHANCED 1 > +#define SCRAMBLER_EN BIT(4) > + > +#define FULL_LT_STARTED BIT(0) > +#define FASE_LT_STARTED BIT(1) > +#define CLK_RECOVERY_FINISHED BIT(2) > +#define EQ_PHASE_FINISHED BIT(3) > +#define FASE_LT_START_FINISHED BIT(4) > +#define CLK_RECOVERY_FAILED BIT(5) > +#define EQ_PHASE_FAILED BIT(6) > +#define FASE_LT_FAILED BIT(7) > + > +#define TU_SIZE 30 > +#define CDNS_DP_MAX_LINK_RATE 540000 > + > +#define F_HDMI_ENCODING(x) (((x) & ((1 << 2) - 1)) << 16) > +#define F_VIF_DATA_WIDTH(x) (((x) & ((1 << 2) - 1)) << 2) > +#define F_HDMI_MODE(x) (((x) & ((1 << 2) - 1)) << 0) > +#define F_GCP_EN(x) (((x) & ((1 << 1) - 1)) << 12) > +#define F_DATA_EN(x) (((x) & ((1 << 1) - 1)) << 15) > +#define F_CLEAR_AVMUTE(x) (((x) & ((1 << 1) - 1)) << 14) > +#define F_HDMI2_PREAMBLE_EN(x) (((x) & ((1 << 1) - 1)) << 18) > +#define F_PIC_3D(x) (((x) & ((1 << 4) - 1)) << 7) > +#define F_BCH_EN(x) (((x) & ((1 << 1) - 1)) << 11) > +#define F_SOURCE_PHY_MHDP_SEL(x) (((x) & ((1 << 2) - 1)) << 3) > +#define F_HPD_VALID_WIDTH(x) (((x) & ((1 << 12) - 1)) << 0) > +#define F_HPD_GLITCH_WIDTH(x) (((x) & ((1 << 8) - 1)) << 12) > +#define F_HDMI2_CTRL_IL_MODE(x) (((x) & ((1 << 1) - 1)) << 19) > +#define F_SOURCE_PHY_LANE0_SWAP(x) (((x) & ((1 << 2) - 1)) << 0) > +#define F_SOURCE_PHY_LANE1_SWAP(x) (((x) & ((1 << 2) - 1)) << 2) > +#define F_SOURCE_PHY_LANE2_SWAP(x) (((x) & ((1 << 2) - 1)) << 4) > +#define F_SOURCE_PHY_LANE3_SWAP(x) (((x) & ((1 << 2) - 1)) << 6) > +#define F_SOURCE_PHY_COMB_BYPASS(x) (((x) & ((1 << 1) - 1)) << 21) > +#define F_SOURCE_PHY_20_10(x) (((x) & ((1 << 1) - 1)) << 22) > +#define F_PKT_ALLOC_ADDRESS(x) (((x) & ((1 << 4) - 1)) << 0) > +#define F_ACTIVE_IDLE_TYPE(x) (((x) & ((1 << 1) - 1)) << 17) > +#define F_FIFO1_FLUSH(x) (((x) & ((1 << 1) - 1)) << 0) > +#define F_PKT_ALLOC_WR_EN(x) (((x) & ((1 << 1) - 1)) << 0) > +#define F_DATA_WR(x) (x) > +#define F_WR_ADDR(x) (((x) & ((1 << 4) - 1)) << 0) > +#define F_HOST_WR(x) (((x) & ((1 << 1) - 1)) << 0) > +#define F_TYPE_VALID(x) (((x) & ((1 << 1) - 1)) << 16) > +#define F_PACKET_TYPE(x) (((x) & ((1 << 8) - 1)) << 8) > + > +/* Reference cycles when using lane clock as reference */ > +#define LANE_REF_CYC 0x8000 > + > +/* HPD Debounce */ > +#define HOTPLUG_DEBOUNCE_MS 200 > + > +/* HPD IRQ Index */ > +#define IRQ_IN 0 > +#define IRQ_OUT 1 > +#define IRQ_NUM 2 > + > +/* FW check alive timeout */ > +#define CDNS_KEEP_ALIVE_TIMEOUT 2000 > +#define CDNS_KEEP_ALIVE_MASK GENMASK(7, 0) > + > +enum voltage_swing_level { > + VOLTAGE_LEVEL_0, > + VOLTAGE_LEVEL_1, > + VOLTAGE_LEVEL_2, > + VOLTAGE_LEVEL_3, > +}; > + > +enum pre_emphasis_level { > + PRE_EMPHASIS_LEVEL_0, > + PRE_EMPHASIS_LEVEL_1, > + PRE_EMPHASIS_LEVEL_2, > + PRE_EMPHASIS_LEVEL_3, > +}; > + > +enum pattern_set { > + PTS1 = BIT(0), > + PTS2 = BIT(1), > + PTS3 = BIT(2), > + PTS4 = BIT(3), > + DP_NONE = BIT(4) > +}; > + > +enum vic_color_depth { > + BCS_6 = 0x1, > + BCS_8 = 0x2, > + BCS_10 = 0x4, > + BCS_12 = 0x8, > + BCS_16 = 0x10, > +}; > + > +enum vic_bt_type { > + BT_601 = 0x0, > + BT_709 = 0x1, > +}; > + > +enum { > + MODE_DVI, > + MODE_HDMI_1_4, > + MODE_HDMI_2_0, > +}; > + > +struct video_info { > + int bpc; > + int color_fmt; > +}; > + > +struct mhdp8501_plat_data { > + int hdmi_lane_mapping; > + int dp_lane_mapping; > +}; > + > +struct cdns_mhdp8501_device { > + struct cdns_mhdp_base base; > + > + struct device *dev; > + void __iomem *regs; > + struct drm_connector *curr_conn; > + struct drm_bridge bridge; > + struct clk *apb_clk; > + struct phy *phy; > + > + struct video_info video_info; > + struct drm_display_mode mode; > + > + int irq[IRQ_NUM]; > + struct delayed_work hotplug_work; > + int connector_type; > + u32 lane_mapping; > + > + /* protect mailbox communications with the firmware */ > + struct mutex mbox_mutex; > + > + const struct mhdp8501_plat_data *plat_data; > + > + union { > + struct _dp_data { > + u32 rate; > + u8 num_lanes; > + struct drm_dp_aux aux; > + u8 dpcd[DP_RECEIVER_CAP_SIZE]; > + } dp; > + struct _hdmi_data { > + u32 hdmi_type; > + unsigned long long char_rate; > + } hdmi; > + }; > +}; > + > +extern const struct drm_bridge_funcs cdns_dp_bridge_funcs; > +extern const struct drm_bridge_funcs cdns_hdmi_bridge_funcs; > + > +ssize_t cdns_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg); > +enum drm_connector_status cdns_mhdp8501_detect(struct cdns_mhdp8501_device *mhdp); > +int cdns_dp_aux_destroy(struct cdns_mhdp8501_device *mhdp); > + > +#endif > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > new file mode 100644 > index 000000000000..d8cc31daf322 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > @@ -0,0 +1,700 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Cadence MHDP8501 DisplayPort(DP) bridge driver > + * > + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. > + * > + */ > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_print.h> > +#include <linux/phy/phy.h> > +#include <linux/phy/phy-dp.h> > + > +#include "cdns-mhdp8501-core.h" > + > +#define LINK_TRAINING_TIMEOUT_MS 500 > +#define LINK_TRAINING_RETRY_MS 20 > + > +ssize_t cdns_dp_aux_transfer(struct drm_dp_aux *aux, > + struct drm_dp_aux_msg *msg) > +{ > + struct cdns_mhdp8501_device *mhdp = dev_get_drvdata(aux->dev); > + bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ); > + int ret; > + > + /* Ignore address only message */ > + if (!msg->size || !msg->buffer) { > + msg->reply = native ? > + DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK; > + return msg->size; > + } > + > + if (!native) { > + dev_err(mhdp->dev, "%s: only native messages supported\n", __func__); > + return -EINVAL; > + } > + > + /* msg sanity check */ > + if (msg->size > DP_AUX_MAX_PAYLOAD_BYTES) { > + dev_err(mhdp->dev, "%s: invalid msg: size(%zu), request(%x)\n", > + __func__, msg->size, (unsigned int)msg->request); > + return -EINVAL; > + } > + > + if (msg->request == DP_AUX_NATIVE_WRITE) { > + const u8 *buf = msg->buffer; > + int i; > + > + for (i = 0; i < msg->size; ++i) { > + ret = cdns_mhdp_dpcd_write(&mhdp->base, > + msg->address + i, buf[i]); > + if (ret < 0) { > + dev_err(mhdp->dev, "Failed to write DPCD\n"); > + return ret; > + } > + } > + msg->reply = DP_AUX_NATIVE_REPLY_ACK; > + return msg->size; > + } > + > + if (msg->request == DP_AUX_NATIVE_READ) { > + ret = cdns_mhdp_dpcd_read(&mhdp->base, msg->address, > + msg->buffer, msg->size); > + if (ret < 0) > + return ret; > + msg->reply = DP_AUX_NATIVE_REPLY_ACK; > + return msg->size; > + } > + return 0; > +} > + > +int cdns_dp_aux_destroy(struct cdns_mhdp8501_device *mhdp) > +{ > + drm_dp_aux_unregister(&mhdp->dp.aux); > + > + return 0; > +} > + > +static int cdns_dp_get_msa_misc(struct video_info *video) > +{ > + u32 msa_misc; > + u8 color_space = 0; > + u8 bpc = 0; > + > + switch (video->color_fmt) { > + /* set YUV default color space conversion to BT601 */ > + case DRM_COLOR_FORMAT_YCBCR444: > + color_space = 6 + BT_601 * 8; > + break; > + case DRM_COLOR_FORMAT_YCBCR422: > + color_space = 5 + BT_601 * 8; > + break; > + case DRM_COLOR_FORMAT_YCBCR420: > + color_space = 5; > + break; > + case DRM_COLOR_FORMAT_RGB444: > + default: > + color_space = 0; > + break; > + }; > + > + switch (video->bpc) { > + case 6: > + bpc = 0; > + break; > + case 10: > + bpc = 2; > + break; > + case 12: > + bpc = 3; > + break; > + case 16: > + bpc = 4; > + break; > + case 8: > + default: > + bpc = 1; > + break; > + }; > + > + msa_misc = (bpc << 5) | (color_space << 1); > + > + return msa_misc; > +} > + > +static int cdns_dp_config_video(struct cdns_mhdp8501_device *mhdp) > +{ > + struct video_info *video = &mhdp->video_info; > + struct drm_display_mode *mode = &mhdp->mode; > + bool h_sync_polarity, v_sync_polarity; > + u64 symbol; > + u32 val, link_rate, rem; > + u8 bit_per_pix, tu_size_reg = TU_SIZE; > + int ret; > + > + bit_per_pix = (video->color_fmt == DRM_COLOR_FORMAT_YCBCR422) ? > + (video->bpc * 2) : (video->bpc * 3); > + > + link_rate = mhdp->dp.rate / 1000; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, BND_HSYNC2VSYNC, VIF_BYPASS_INTERLACE); > + if (ret) > + goto err_config_video; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HSYNC2VSYNC_POL_CTRL, 0); > + if (ret) > + goto err_config_video; > + > + /* > + * get a best tu_size and valid symbol: > + * 1. chose Lclk freq(162Mhz, 270Mhz, 540Mhz), set TU to 32 > + * 2. calculate VS(valid symbol) = TU * Pclk * Bpp / (Lclk * Lanes) > + * 3. if VS > *.85 or VS < *.1 or VS < 2 or TU < VS + 4, then set > + * TU += 2 and repeat 2nd step. > + */ > + do { > + tu_size_reg += 2; > + symbol = tu_size_reg * mode->clock * bit_per_pix; > + do_div(symbol, mhdp->dp.num_lanes * link_rate * 8); > + rem = do_div(symbol, 1000); > + if (tu_size_reg > 64) { > + ret = -EINVAL; > + dev_err(mhdp->dev, "tu error, clk:%d, lanes:%d, rate:%d\n", > + mode->clock, mhdp->dp.num_lanes, link_rate); > + goto err_config_video; > + } > + } while ((symbol <= 1) || (tu_size_reg - symbol < 4) || > + (rem > 850) || (rem < 100)); > + > + val = symbol + (tu_size_reg << 8); > + val |= TU_CNT_RST_EN; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_TU, val); > + if (ret) > + goto err_config_video; > + > + /* set the FIFO Buffer size */ > + val = div_u64(mode->clock * (symbol + 1), 1000) + link_rate; > + val /= (mhdp->dp.num_lanes * link_rate); > + val = div_u64(8 * (symbol + 1), bit_per_pix) - val; > + val += 2; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VC_TABLE(15), val); > + > + switch (video->bpc) { > + case 6: > + val = BCS_6; > + break; > + case 10: > + val = BCS_10; > + break; > + case 12: > + val = BCS_12; > + break; > + case 16: > + val = BCS_16; > + break; > + case 8: > + default: > + val = BCS_8; > + break; > + }; > + > + val += video->color_fmt << 8; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_PXL_REPR, val); > + if (ret) > + goto err_config_video; > + > + v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC); > + h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC); > + > + val = h_sync_polarity ? DP_FRAMER_SP_HSP : 0; > + val |= v_sync_polarity ? DP_FRAMER_SP_VSP : 0; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_SP, val); > + if (ret) > + goto err_config_video; > + > + val = (mode->hsync_start - mode->hdisplay) << 16; > + val |= mode->htotal - mode->hsync_end; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRONT_BACK_PORCH, val); > + if (ret) > + goto err_config_video; > + > + val = mode->hdisplay * bit_per_pix / 8; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_BYTE_COUNT, val); > + if (ret) > + goto err_config_video; > + > + val = mode->htotal | ((mode->htotal - mode->hsync_start) << 16); > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_HORIZONTAL_0, val); > + if (ret) > + goto err_config_video; > + > + val = mode->hsync_end - mode->hsync_start; > + val |= (mode->hdisplay << 16) | (h_sync_polarity << 15); > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_HORIZONTAL_1, val); > + if (ret) > + goto err_config_video; > + > + val = mode->vtotal; > + val |= (mode->vtotal - mode->vsync_start) << 16; > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_VERTICAL_0, val); > + if (ret) > + goto err_config_video; > + > + val = mode->vsync_end - mode->vsync_start; > + val |= (mode->vdisplay << 16) | (v_sync_polarity << 15); > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_VERTICAL_1, val); > + if (ret) > + goto err_config_video; > + > + val = cdns_dp_get_msa_misc(video); > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_MISC, val); > + if (ret) > + goto err_config_video; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, STREAM_CONFIG, 1); > + if (ret) > + goto err_config_video; > + > + val = mode->hsync_end - mode->hsync_start; > + val |= mode->hdisplay << 16; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_HORIZONTAL, val); > + if (ret) > + goto err_config_video; > + > + val = mode->vdisplay; > + val |= (mode->vtotal - mode->vsync_start) << 16; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VERTICAL_0, val); > + if (ret) > + goto err_config_video; > + > + val = mode->vtotal; > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VERTICAL_1, val); > + if (ret) > + goto err_config_video; > + > + ret = cdns_mhdp_dp_reg_write_bit(&mhdp->base, DP_VB_ID, 2, 1, 0); > + > +err_config_video: > + if (ret) > + dev_err(mhdp->dev, "config video failed: %d\n", ret); > + return ret; > +} > + > +static void cdns_dp_pixel_clk_reset(struct cdns_mhdp8501_device *mhdp) > +{ > + u32 val; > + > + /* reset pixel clk */ > + cdns_mhdp_reg_read(&mhdp->base, SOURCE_HDTX_CAR, &val); > + cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, val & 0xFD); > + cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, val); > +} > + > +static int cdns_dp_set_video_status(struct cdns_mhdp8501_device *mhdp, int active) > +{ > + u8 msg; > + int ret; > + > + msg = !!active; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, DPTX_SET_VIDEO, > + sizeof(msg), &msg); > + if (ret) > + dev_err(mhdp->dev, "set video status failed: %d\n", ret); > + > + mutex_unlock(&mhdp->mbox_mutex); > + > + return ret; > +} > + > +static int cdns_dp_training_start(struct cdns_mhdp8501_device *mhdp) > +{ > + unsigned long timeout; > + u8 msg, event[2]; > + int ret; > + > + msg = LINK_TRAINING_RUN; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + /* start training */ > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_TRAINING_CONTROL, sizeof(msg), &msg); > + if (ret) > + goto err_training_start; > + > + timeout = jiffies + msecs_to_jiffies(LINK_TRAINING_TIMEOUT_MS); > + while (time_before(jiffies, timeout)) { > + msleep(LINK_TRAINING_RETRY_MS); > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_READ_EVENT, 0, NULL); > + if (ret) > + goto err_training_start; > + > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_READ_EVENT, sizeof(event)); > + if (ret) > + goto err_training_start; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, event, sizeof(event)); > + if (ret) > + goto err_training_start; > + > + if (event[1] & CLK_RECOVERY_FAILED) { > + dev_err(mhdp->dev, "clock recovery failed\n"); > + } else if (event[1] & EQ_PHASE_FINISHED) { > + mutex_unlock(&mhdp->mbox_mutex); > + return 0; > + } > + } > + > + ret = -ETIMEDOUT; > + > +err_training_start: > + mutex_unlock(&mhdp->mbox_mutex); > + > + dev_err(mhdp->dev, "training failed: %d\n", ret); > + return ret; > +} > + > +static int cdns_dp_get_training_status(struct cdns_mhdp8501_device *mhdp) > +{ > + u8 status[13]; > + int ret; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_READ_LINK_STAT, 0, NULL); > + if (ret) > + goto err_get_training_status; > + > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_READ_LINK_STAT, > + sizeof(status)); > + if (ret) > + goto err_get_training_status; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, status, sizeof(status)); > + if (ret) > + goto err_get_training_status; > + > + mhdp->dp.rate = drm_dp_bw_code_to_link_rate(status[0]); > + mhdp->dp.num_lanes = status[1]; > + > +err_get_training_status: > + mutex_unlock(&mhdp->mbox_mutex); > + > + if (ret) > + dev_err(mhdp->dev, "get training status failed: %d\n", ret); > + return ret; > +} > + > +static int cdns_dp_train_link(struct cdns_mhdp8501_device *mhdp) > +{ > + int ret; > + > + ret = cdns_dp_training_start(mhdp); > + if (ret) { > + dev_err(mhdp->dev, "Failed to start training %d\n", ret); > + return ret; > + } > + > + ret = cdns_dp_get_training_status(mhdp); > + if (ret) { > + dev_err(mhdp->dev, "Failed to get training stat %d\n", ret); > + return ret; > + } > + > + dev_dbg(mhdp->dev, "rate:0x%x, lanes:%d\n", mhdp->dp.rate, > + mhdp->dp.num_lanes); > + return ret; > +} > + > +static int cdns_dp_set_host_cap(struct cdns_mhdp8501_device *mhdp) > +{ > + u8 msg[8]; > + int ret; > + > + msg[0] = drm_dp_link_rate_to_bw_code(mhdp->dp.rate); > + msg[1] = mhdp->dp.num_lanes | SCRAMBLER_EN; > + msg[2] = VOLTAGE_LEVEL_2; > + msg[3] = PRE_EMPHASIS_LEVEL_3; > + msg[4] = PTS1 | PTS2 | PTS3 | PTS4; > + msg[5] = FAST_LT_NOT_SUPPORT; > + msg[6] = mhdp->lane_mapping; > + msg[7] = ENHANCED; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_SET_HOST_CAPABILITIES, > + sizeof(msg), msg); > + > + mutex_unlock(&mhdp->mbox_mutex); > + > + if (ret) > + dev_err(mhdp->dev, "set host cap failed: %d\n", ret); > + > + return ret; > +} > + > +static int cdns_dp_get_edid_block(void *data, u8 *edid, > + unsigned int block, size_t length) > +{ > + struct cdns_mhdp8501_device *mhdp = data; > + u8 msg[2], reg[2], i; > + int ret; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + for (i = 0; i < 4; i++) { > + msg[0] = block / 2; > + msg[1] = block % 2; > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_GET_EDID, sizeof(msg), msg); > + if (ret) > + continue; > + > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_DP_TX, > + DPTX_GET_EDID, > + sizeof(reg) + length); > + if (ret) > + continue; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, sizeof(reg)); > + if (ret) > + continue; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, length); > + if (ret) > + continue; > + > + if (reg[0] == length && reg[1] == block / 2) > + break; > + } > + > + if (ret) > + dev_err(mhdp->dev, "get block[%d] edid failed: %d\n", block, ret); > + > + mutex_unlock(&mhdp->mbox_mutex); > + return ret; > +} > + > +static void cdns_dp_mode_set(struct cdns_mhdp8501_device *mhdp) > +{ > + union phy_configure_opts phy_cfg; > + int ret; > + > + cdns_dp_pixel_clk_reset(mhdp); > + > + /* Get DP Caps */ > + ret = drm_dp_dpcd_read(&mhdp->dp.aux, DP_DPCD_REV, mhdp->dp.dpcd, > + DP_RECEIVER_CAP_SIZE); > + if (ret < 0) { > + dev_err(mhdp->dev, "Failed to get caps %d\n", ret); > + return; > + } > + > + mhdp->dp.rate = drm_dp_max_link_rate(mhdp->dp.dpcd); > + mhdp->dp.num_lanes = drm_dp_max_lane_count(mhdp->dp.dpcd); > + > + /* check the max link rate */ > + if (mhdp->dp.rate > CDNS_DP_MAX_LINK_RATE) > + mhdp->dp.rate = CDNS_DP_MAX_LINK_RATE; > + > + phy_cfg.dp.lanes = mhdp->dp.num_lanes; > + phy_cfg.dp.link_rate = mhdp->dp.rate; > + phy_cfg.dp.set_lanes = false; > + phy_cfg.dp.set_rate = false; > + phy_cfg.dp.set_voltages = true; > + > + /* Mailbox protect for DP PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_configure(mhdp->phy, &phy_cfg); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > + __func__, ret); > + return; > + } > + > + /* Video off */ > + ret = cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_IDLE); > + if (ret) { > + dev_err(mhdp->dev, "Failed to valid video %d\n", ret); > + return; > + } > + > + /* Line swapping */ > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping); > + > + /* Set DP host capability */ > + ret = cdns_dp_set_host_cap(mhdp); > + if (ret) { > + dev_err(mhdp->dev, "Failed to set host cap %d\n", ret); > + return; > + } > + > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_AUX_SWAP_INVERSION_CONTROL, > + AUX_HOST_INVERT); > + if (ret) { > + dev_err(mhdp->dev, "Failed to set host invert %d\n", ret); > + return; > + } > + > + ret = cdns_dp_config_video(mhdp); > + if (ret) > + dev_err(mhdp->dev, "Failed to config video %d\n", ret); > +} > + > +static int cdns_dp_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { > + dev_err(mhdp->dev, "do not support creating a drm_connector\n"); > + return -EINVAL; > + } > + > + mhdp->dp.aux.drm_dev = bridge->dev; > + > + return drm_dp_aux_register(&mhdp->dp.aux); > +} > + > +static enum drm_mode_status > +cdns_dp_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + enum drm_mode_status mode_status = MODE_OK; > + > + /* We don't support double-clocked modes */ > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > + mode->flags & DRM_MODE_FLAG_INTERLACE) > + return MODE_BAD; > + > + /* MAX support pixel clock rate 594MHz */ > + if (mode->clock > 594000) > + return MODE_CLOCK_HIGH; > + > + if (mode->hdisplay > 3840) > + return MODE_BAD_HVALUE; > + > + if (mode->vdisplay > 2160) > + return MODE_BAD_VVALUE; > + > + return mode_status; > +} > + > +static enum drm_connector_status > +cdns_dp_bridge_detect(struct drm_bridge *bridge) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + return cdns_mhdp8501_detect(mhdp); > +} > + > +static const struct drm_edid > +*cdns_dp_bridge_edid_read(struct drm_bridge *bridge, > + struct drm_connector *connector) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + return drm_edid_read_custom(connector, cdns_dp_get_edid_block, mhdp); > +} > + > +static void cdns_dp_bridge_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_state) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_IDLE); > + mhdp->curr_conn = NULL; > + > + /* Mailbox protect for DP PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + phy_power_off(mhdp->phy); > + mutex_unlock(&mhdp->mbox_mutex); > +} > + > +static void cdns_dp_bridge_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_state) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + struct drm_atomic_state *state = old_state->base.state; > + struct drm_connector *connector; > + struct video_info *video = &mhdp->video_info; > + struct drm_crtc_state *crtc_state; > + struct drm_connector_state *conn_state; > + const struct drm_display_mode *mode; > + int ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, > + bridge->encoder); > + if (WARN_ON(!connector)) > + return; > + > + mhdp->curr_conn = connector; > + > + conn_state = drm_atomic_get_new_connector_state(state, connector); > + if (WARN_ON(!conn_state)) > + return; > + > + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); > + if (WARN_ON(!crtc_state)) > + return; > + > + mode = &crtc_state->adjusted_mode; > + > + switch (connector->display_info.bpc) { > + case 10: > + video->bpc = 10; > + break; > + case 6: > + video->bpc = 6; > + break; > + default: > + video->bpc = 8; > + break; > + } > + > + /* The only currently supported format */ > + video->color_fmt = DRM_COLOR_FORMAT_RGB444; > + > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > + mode->hdisplay, mode->vdisplay, mode->clock); > + memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode)); > + > + cdns_dp_mode_set(mhdp); > + > + /* Link trainning */ > + ret = cdns_dp_train_link(mhdp); > + if (ret) { > + dev_err(mhdp->dev, "Failed link train %d\n", ret); > + return; > + } > + > + ret = cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_VALID); > + if (ret) { > + dev_err(mhdp->dev, "Failed to valid video %d\n", ret); > + return; > + } > +} > + > +const struct drm_bridge_funcs cdns_dp_bridge_funcs = { > + .attach = cdns_dp_bridge_attach, > + .detect = cdns_dp_bridge_detect, > + .edid_read = cdns_dp_bridge_edid_read, > + .mode_valid = cdns_dp_bridge_mode_valid, > + .atomic_enable = cdns_dp_bridge_atomic_enable, > + .atomic_disable = cdns_dp_bridge_atomic_disable, > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > +}; > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > new file mode 100644 > index 000000000000..834ca9788a5f > --- /dev/null > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > @@ -0,0 +1,595 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Cadence MHDP8501 HDMI bridge driver > + * > + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. > + * > + */ > +#include <drm/display/drm_hdmi_helper.h> > +#include <drm/display/drm_hdmi_state_helper.h> > +#include <drm/display/drm_scdc_helper.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_print.h> > +#include <linux/phy/phy.h> > +#include <linux/phy/phy-hdmi.h> > + > +#include "cdns-mhdp8501-core.h" > + > +/** > + * cdns_hdmi_config_infoframe() - fill the HDMI infoframe > + * @mhdp: phandle to mhdp device. > + * @entry_id: The packet memory address in which the data is written. > + * @len: length of infoframe. > + * @buf: point to InfoFrame Packet. > + * @type: Packet Type of InfoFrame in HDMI Specification. > + * > + */ > +static void cdns_hdmi_config_infoframe(struct cdns_mhdp8501_device *mhdp, > + u8 entry_id, u8 len, > + const u8 *buf, u8 type) > +{ > + u8 packet[32], packet_len = 32; > + u32 packet32, len32; > + u32 val, i; > + > + /* > + * only support 32 bytes now > + * packet[0] = 0 > + * packet[1-3] = HB[0-2] InfoFrame Packet Header > + * packet[4-31 = PB[0-27] InfoFrame Packet Contents > + */ > + if (len >= (packet_len - 1)) > + return; > + packet[0] = 0; > + memcpy(packet + 1, buf, len); > + > + /* invalidate entry */ > + val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id); > + writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG); > + writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + SOURCE_PIF_PKT_ALLOC_WR_EN); > + > + /* flush fifo 1 */ > + writel(F_FIFO1_FLUSH(1), mhdp->regs + SOURCE_PIF_FIFO1_FLUSH); > + > + /* write packet into memory */ > + len32 = packet_len / 4; > + for (i = 0; i < len32; i++) { > + packet32 = get_unaligned_le32(packet + 4 * i); > + writel(F_DATA_WR(packet32), mhdp->regs + SOURCE_PIF_DATA_WR); > + } > + > + /* write entry id */ > + writel(F_WR_ADDR(entry_id), mhdp->regs + SOURCE_PIF_WR_ADDR); > + > + /* write request */ > + writel(F_HOST_WR(1), mhdp->regs + SOURCE_PIF_WR_REQ); > + > + /* update entry */ > + val = F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) | > + F_PACKET_TYPE(type) | F_PKT_ALLOC_ADDRESS(entry_id); > + writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG); > + > + writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + SOURCE_PIF_PKT_ALLOC_WR_EN); > +} > + > +static int cdns_hdmi_get_edid_block(void *data, u8 *edid, > + u32 block, size_t length) > +{ > + struct cdns_mhdp8501_device *mhdp = data; > + u8 msg[2], reg[5], i; > + int ret; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + for (i = 0; i < 4; i++) { > + msg[0] = block / 2; > + msg[1] = block % 2; > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_HDMI_TX, HDMI_TX_EDID, > + sizeof(msg), msg); > + if (ret) > + continue; > + > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_HDMI_TX, > + HDMI_TX_EDID, sizeof(reg) + length); > + if (ret) > + continue; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, sizeof(reg)); > + if (ret) > + continue; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, length); > + if (ret) > + continue; > + > + if ((reg[3] << 8 | reg[4]) == length) > + break; > + } > + > + mutex_unlock(&mhdp->mbox_mutex); > + > + if (ret) > + dev_err(mhdp->dev, "get block[%d] edid failed: %d\n", block, ret); > + return ret; > +} > + > +static int cdns_hdmi_scdc_write(struct cdns_mhdp8501_device *mhdp, u8 addr, u8 value) > +{ > + u8 msg[5], reg[5]; > + int ret; > + > + msg[0] = 0x54; > + msg[1] = addr; > + msg[2] = 0; > + msg[3] = 1; > + msg[4] = value; > + > + mutex_lock(&mhdp->mbox_mutex); > + > + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_HDMI_TX, HDMI_TX_WRITE, > + sizeof(msg), msg); > + if (ret) > + goto err_scdc_write; > + > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_HDMI_TX, > + HDMI_TX_WRITE, sizeof(reg)); > + if (ret) > + goto err_scdc_write; > + > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, sizeof(reg)); > + if (ret) > + goto err_scdc_write; > + > + if (reg[0] != 0) > + ret = -EINVAL; > + > +err_scdc_write: > + > + mutex_unlock(&mhdp->mbox_mutex); > + > + if (ret) > + dev_err(mhdp->dev, "scdc write failed: %d\n", ret); > + return ret; > +} > + > +static int cdns_hdmi_ctrl_init(struct cdns_mhdp8501_device *mhdp) > +{ > + unsigned long long char_rate = mhdp->hdmi.char_rate; > + u32 protocol = mhdp->hdmi.hdmi_type; > + u32 reg0, reg1, val; > + int ret; > + > + /* Set PHY to HDMI data */ > + ret = cdns_mhdp_reg_write(&mhdp->base, PHY_DATA_SEL, F_SOURCE_PHY_MHDP_SEL(1)); > + if (ret < 0) > + return ret; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_HPD, > + F_HPD_VALID_WIDTH(4) | F_HPD_GLITCH_WIDTH(0)); > + if (ret < 0) > + return ret; > + > + /* open CARS */ > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_PHY_CAR, 0xF); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, 0xFF); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_PKT_CAR, 0xF); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_AIF_CAR, 0xF); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CIPHER_CAR, 0xF); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CRYPTO_CAR, 0xF); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CEC_CAR, 3); > + if (ret < 0) > + return ret; > + > + reg0 = 0x7c1f; > + reg1 = 0x7c1f; > + if (protocol == MODE_HDMI_2_0 && char_rate >= 340000000) { > + reg0 = 0; > + reg1 = 0xFFFFF; > + } > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CLOCK_REG_0, reg0); > + if (ret < 0) > + return ret; > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CLOCK_REG_1, reg1); > + if (ret < 0) > + return ret; > + > + /* set HDMI mode and preemble mode data enable */ > + val = F_HDMI_MODE(protocol) | F_HDMI2_PREAMBLE_EN(1) | > + F_DATA_EN(1) | F_HDMI2_CTRL_IL_MODE(1) | F_BCH_EN(1) | > + F_PIC_3D(0XF) | F_CLEAR_AVMUTE(1); > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); > + > + return ret; > +} > + > +static int cdns_hdmi_mode_config(struct cdns_mhdp8501_device *mhdp, > + struct drm_display_mode *mode, > + struct video_info *video_info) > +{ > + u32 vsync_lines = mode->vsync_end - mode->vsync_start; > + u32 eof_lines = mode->vsync_start - mode->vdisplay; > + u32 sof_lines = mode->vtotal - mode->vsync_end; > + u32 hblank = mode->htotal - mode->hdisplay; > + u32 hactive = mode->hdisplay; > + u32 vblank = mode->vtotal - mode->vdisplay; > + u32 vactive = mode->vdisplay; > + u32 hfront = mode->hsync_start - mode->hdisplay; > + u32 hback = mode->htotal - mode->hsync_end; > + u32 vfront = eof_lines; > + u32 hsync = hblank - hfront - hback; > + u32 vsync = vsync_lines; > + u32 vback = sof_lines; > + u32 v_h_polarity = ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1) + > + ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : 2); > + int ret; > + u32 val; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, SCHEDULER_H_SIZE, (hactive << 16) + hblank); > + if (ret < 0) > + return ret; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, SCHEDULER_V_SIZE, (vactive << 16) + vblank); > + if (ret < 0) > + return ret; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_SIGNAL_FRONT_WIDTH, (vfront << 16) + hfront); > + if (ret < 0) > + return ret; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_SIGNAL_SYNC_WIDTH, (vsync << 16) + hsync); > + if (ret < 0) > + return ret; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_SIGNAL_BACK_WIDTH, (vback << 16) + hback); > + if (ret < 0) > + return ret; > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HSYNC2VSYNC_POL_CTRL, v_h_polarity); > + if (ret < 0) > + return ret; > + > + /* Reset Data Enable */ > + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); > + val &= ~F_DATA_EN(1); > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); > + if (ret < 0) > + return ret; > + > + /* Set bpc */ > + val &= ~F_VIF_DATA_WIDTH(3); > + switch (video_info->bpc) { > + case 10: > + val |= F_VIF_DATA_WIDTH(1); > + break; > + case 12: > + val |= F_VIF_DATA_WIDTH(2); > + break; > + case 16: > + val |= F_VIF_DATA_WIDTH(3); > + break; > + case 8: > + default: > + val |= F_VIF_DATA_WIDTH(0); > + break; > + } > + > + /* select color encoding */ > + val &= ~F_HDMI_ENCODING(3); > + switch (video_info->color_fmt) { > + case HDMI_COLORSPACE_YUV444: > + val |= F_HDMI_ENCODING(2); > + break; > + case HDMI_COLORSPACE_YUV422: > + val |= F_HDMI_ENCODING(1); > + break; > + case HDMI_COLORSPACE_YUV420: > + val |= F_HDMI_ENCODING(3); > + break; > + case HDMI_COLORSPACE_RGB: > + default: > + val |= F_HDMI_ENCODING(0); > + break; > + } > + > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); > + if (ret < 0) > + return ret; > + > + /* set data enable */ > + val |= F_DATA_EN(1); > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); > + > + return ret; > +} > + > +static int cdns_hdmi_disable_gcp(struct cdns_mhdp8501_device *mhdp) > +{ > + u32 val; > + > + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); > + val &= ~F_GCP_EN(1); > + > + return cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); > +} > + > +static int cdns_hdmi_enable_gcp(struct cdns_mhdp8501_device *mhdp) > +{ > + u32 val; > + > + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); > + val |= F_GCP_EN(1); > + > + return cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); > +} > + > +static void cdns_hdmi_sink_config(struct cdns_mhdp8501_device *mhdp) > +{ > + struct drm_scdc *scdc = &mhdp->curr_conn->display_info.hdmi.scdc; > + u8 buff = 0; > + > + /* Default work in HDMI1.4 */ > + mhdp->hdmi.hdmi_type = MODE_HDMI_1_4; > + > + /* check sink support SCDC or not */ > + if (!scdc->supported) { > + dev_info(mhdp->dev, "Sink Not Support SCDC\n"); > + return; > + } > + > + if (mhdp->hdmi.char_rate > 340000000) { > + /* > + * TMDS Character Rate above 340MHz should working in HDMI2.0 > + * Enable scrambling and TMDS_Bit_Clock_Ratio > + */ > + buff = SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 | SCDC_SCRAMBLING_ENABLE; > + mhdp->hdmi.hdmi_type = MODE_HDMI_2_0; > + } else if (scdc->scrambling.low_rates) { > + /* > + * Enable scrambling and HDMI2.0 when scrambling capability of sink > + * be indicated in the HF-VSDB LTE_340Mcsc_scramble bit > + */ > + buff = SCDC_SCRAMBLING_ENABLE; > + mhdp->hdmi.hdmi_type = MODE_HDMI_2_0; > + } > + > + /* TMDS config */ > + cdns_hdmi_scdc_write(mhdp, SCDC_TMDS_CONFIG, buff); > +} > + > +static int cdns_hdmi_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { > + dev_err(mhdp->dev, "do not support creating a drm_connector\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static enum drm_mode_status > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > + const struct drm_display_mode *mode, > + unsigned long long tmds_rate) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + union phy_configure_opts phy_cfg; > + int ret; > + > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret < 0) > + return MODE_CLOCK_RANGE; > + > + return MODE_OK; > +} > + > +static enum drm_mode_status > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + unsigned long long tmds_rate; > + > + /* We don't support double-clocked and Interlaced modes */ > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > + mode->flags & DRM_MODE_FLAG_INTERLACE) > + return MODE_BAD; > + > + /* MAX support pixel clock rate 594MHz */ > + if (mode->clock > 594000) > + return MODE_CLOCK_HIGH; > + > + if (mode->hdisplay > 3840) > + return MODE_BAD_HVALUE; > + > + if (mode->vdisplay > 2160) > + return MODE_BAD_VVALUE; > + > + tmds_rate = mode->clock * 1000ULL; > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); > +} > + > +static enum drm_connector_status > +cdns_hdmi_bridge_detect(struct drm_bridge *bridge) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + return cdns_mhdp8501_detect(mhdp); > +} > + > +static const struct drm_edid > +*cdns_hdmi_bridge_edid_read(struct drm_bridge *bridge, > + struct drm_connector *connector) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + return drm_edid_read_custom(connector, cdns_hdmi_get_edid_block, mhdp); > +} > + > +static void cdns_hdmi_bridge_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_state) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + mhdp->curr_conn = NULL; > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + phy_power_off(mhdp->phy); > + mutex_unlock(&mhdp->mbox_mutex); > +} > + > +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_state) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + struct drm_atomic_state *state = old_state->base.state; > + struct drm_connector *connector; > + struct video_info *video = &mhdp->video_info; > + struct drm_crtc_state *crtc_state; > + struct drm_connector_state *conn_state; > + struct drm_display_mode *mode = &mhdp->mode; > + union phy_configure_opts phy_cfg; > + int ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, > + bridge->encoder); > + if (WARN_ON(!connector)) > + return; > + > + mhdp->curr_conn = connector; > + > + conn_state = drm_atomic_get_new_connector_state(state, connector); > + if (WARN_ON(!conn_state)) > + return; > + > + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); > + if (WARN_ON(!crtc_state)) > + return; > + > + video->color_fmt = conn_state->hdmi.output_format; > + video->bpc = conn_state->hdmi.output_bpc; > + > + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); > + > + /* video mode check */ > + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == 0) > + return; > + > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > + mode->hdisplay, mode->vdisplay, mode->clock); > + > + drm_atomic_helper_connector_hdmi_update_infoframes(connector, state); > + > + /* Line swapping */ > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping); > + > + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, > + mhdp->video_info.bpc, > + mhdp->video_info.color_fmt); > + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; > + > + /* Mailbox protect for HDMI PHY access */ > + mutex_lock(&mhdp->mbox_mutex); > + ret = phy_configure(mhdp->phy, &phy_cfg); > + mutex_unlock(&mhdp->mbox_mutex); > + if (ret) { > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > + __func__, ret); > + return; > + } > + > + cdns_hdmi_sink_config(mhdp); > + > + ret = cdns_hdmi_ctrl_init(mhdp); > + if (ret < 0) { > + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); > + return; > + } > + > + /* Config GCP */ > + if (mhdp->video_info.bpc == 8) > + cdns_hdmi_disable_gcp(mhdp); > + else > + cdns_hdmi_enable_gcp(mhdp); > + > + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); > + if (ret < 0) { > + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking ret = %d\n", ret); > + return; > + } > +} > + > +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge *bridge, > + enum hdmi_infoframe_type type) > +{ > + return 0; > +} > + > +static int cdns_hdmi_bridge_write_infoframe(struct drm_bridge *bridge, > + enum hdmi_infoframe_type type, > + const u8 *buffer, size_t len) > +{ > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > + > + switch (type) { > + case HDMI_INFOFRAME_TYPE_AVI: > + cdns_hdmi_config_infoframe(mhdp, 0, len, buffer, HDMI_INFOFRAME_TYPE_AVI); > + break; > + case HDMI_INFOFRAME_TYPE_SPD: > + cdns_hdmi_config_infoframe(mhdp, 1, len, buffer, HDMI_INFOFRAME_TYPE_SPD); > + break; > + case HDMI_INFOFRAME_TYPE_VENDOR: > + cdns_hdmi_config_infoframe(mhdp, 2, len, buffer, HDMI_INFOFRAME_TYPE_VENDOR); > + break; > + default: > + dev_dbg(mhdp->dev, "Unsupported infoframe type %x\n", type); > + } > + > + return 0; > +} > + > +static int cdns_hdmi_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + return drm_atomic_helper_connector_hdmi_check(conn_state->connector, conn_state->state); > +} > + > +const struct drm_bridge_funcs cdns_hdmi_bridge_funcs = { > + .attach = cdns_hdmi_bridge_attach, > + .detect = cdns_hdmi_bridge_detect, > + .edid_read = cdns_hdmi_bridge_edid_read, > + .mode_valid = cdns_hdmi_bridge_mode_valid, > + .atomic_enable = cdns_hdmi_bridge_atomic_enable, > + .atomic_disable = cdns_hdmi_bridge_atomic_disable, > + .atomic_check = cdns_hdmi_bridge_atomic_check, > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > + .hdmi_clear_infoframe = cdns_hdmi_bridge_clear_infoframe, > + .hdmi_write_infoframe = cdns_hdmi_bridge_write_infoframe, > + .hdmi_tmds_char_rate_valid = cdns_hdmi_tmds_char_rate_valid, > +};
> > Le 02/07/2024 à 14:22, Sandor Yu a écrit : > > Add a new DRM DisplayPort and HDMI bridge driver for Candence > MHDP8501 > > used in i.MX8MQ SOC. MHDP8501 could support HDMI or DisplayPort > > standards according embedded Firmware running in the uCPU. > > > > For iMX8MQ SOC, the DisplayPort/HDMI FW was loaded and activated by > > SOC's ROM code. Bootload binary included respective specific firmware > > is required. > > > > Driver will check display connector type and > > then load the corresponding driver. > > > > Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> > > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > --- > > v15->v16: > > - rebase the patchset sits on top Dmitry's > > 'make use of the HDMI connector infrastructure' patchset ([2]). > > - Add DRM_BRIDGE_OP_HDMI flags for HDMI driver, > > - Introduce the hdmi info frame helper functions, added > hdmi_clear_infoframe(), > > hdmi_write_infoframe() and hdmi_tmds_char_rate_valid(). > > - mode_fixup() was replaced by atomic_check(). > > - Fix video mode 4Kp30 did not work on some displays that support > > LTE_340Mcsc_scramble. > > - updated for tmds_char_rate added in patch #2. > > > > v13->v14: > > - Rebase to next-20240219, replace get_edid function by edid_read > > function. > > > > v12->v13: > > - Explicitly include linux/platform_device.h for cdns-mhdp8501-core.c > > - Fix build warning > > - Order bit bpc and color_space in descending shit. > > > > v11->v12: > > - Replace DRM_INFO with dev_info or dev_warn. > > - Replace DRM_ERROR with dev_err. > > - Return ret when cdns_mhdp_dpcd_read failed in function > cdns_dp_aux_transferi(). > > - Remove unused parmeter in function cdns_dp_get_msa_misc > > and use two separate variables for color space and bpc. > > - Add year 2024 to copyright. > > > > drivers/gpu/drm/bridge/cadence/Kconfig | 16 + > > drivers/gpu/drm/bridge/cadence/Makefile | 2 + > > .../drm/bridge/cadence/cdns-mhdp8501-core.c | 330 +++++++++ > > .../drm/bridge/cadence/cdns-mhdp8501-core.h | 367 +++++++++ > > .../gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c | 700 > ++++++++++++++++++ > > .../drm/bridge/cadence/cdns-mhdp8501-hdmi.c | 595 > +++++++++++++++ > > 6 files changed, 2010 insertions(+) > > create mode 100644 > drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > > create mode 100644 > drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > > create mode 100644 > drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > > create mode 100644 > drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > > > > diff --git a/drivers/gpu/drm/bridge/cadence/Kconfig > b/drivers/gpu/drm/bridge/cadence/Kconfig > > index e0973339e9e3..45848e741f5f 100644 > > --- a/drivers/gpu/drm/bridge/cadence/Kconfig > > +++ b/drivers/gpu/drm/bridge/cadence/Kconfig > > @@ -51,3 +51,19 @@ config DRM_CDNS_MHDP8546_J721E > > initializes the J721E Display Port and sets up the > > clock and data muxes. > > endif > > + > > +config DRM_CDNS_MHDP8501 > > + tristate "Cadence MHDP8501 DP/HDMI bridge" > > + select DRM_KMS_HELPER > > + select DRM_PANEL_BRIDGE > > + select DRM_DISPLAY_DP_HELPER > > + select DRM_DISPLAY_HELPER > > + select CDNS_MHDP_HELPER > > + select DRM_CDNS_AUDIO > > + depends on OF > > + help > > + Support Cadence MHDP8501 DisplayPort/HDMI bridge. > > + Cadence MHDP8501 support one or more protocols, > > + including DisplayPort and HDMI. > > + To use the DP and HDMI drivers, their respective > > + specific firmware is required. > > diff --git a/drivers/gpu/drm/bridge/cadence/Makefile > b/drivers/gpu/drm/bridge/cadence/Makefile > > index 087dc074820d..02c1a9f3cf6f 100644 > > --- a/drivers/gpu/drm/bridge/cadence/Makefile > > +++ b/drivers/gpu/drm/bridge/cadence/Makefile > > @@ -6,3 +6,5 @@ obj-$(CONFIG_CDNS_MHDP_HELPER) += > cdns-mhdp-helper.o > > obj-$(CONFIG_DRM_CDNS_MHDP8546) += cdns-mhdp8546.o > > cdns-mhdp8546-y := cdns-mhdp8546-core.o cdns-mhdp8546-hdcp.o > > cdns-mhdp8546-$(CONFIG_DRM_CDNS_MHDP8546_J721E) += > cdns-mhdp8546-j721e.o > > +obj-$(CONFIG_DRM_CDNS_MHDP8501) += cdns-mhdp8501.o > > +cdns-mhdp8501-y := cdns-mhdp8501-core.o cdns-mhdp8501-dp.o > cdns-mhdp8501-hdmi.o > > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > > new file mode 100644 > > index 000000000000..c306db982b76 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c > > @@ -0,0 +1,330 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Cadence Display Port Interface (DP) driver > > + * > > + * Copyright (C) 2023, 2024 NXP Semiconductor, Inc. > > + * > > + */ > > +#include <drm/drm_of.h> > > +#include <drm/drm_print.h> > > +#include <linux/clk.h> > > +#include <linux/irq.h> > > +#include <linux/mutex.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/phy/phy.h> > > + > > +#include "cdns-mhdp8501-core.h" > > + > > +static int cdns_mhdp8501_read_hpd(struct cdns_mhdp8501_device > *mhdp) > > +{ > > + u8 status; > > + int ret; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_GENERAL, > > + GENERAL_GET_HPD_STATE, 0, > NULL); > > + if (ret) > > + goto err_get_hpd; > > + > > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, > MB_MODULE_ID_GENERAL, > > + > GENERAL_GET_HPD_STATE, > > + sizeof(status)); > > + if (ret) > > + goto err_get_hpd; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, &status, > sizeof(status)); > > + if (ret) > > + goto err_get_hpd; > > + > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + return status; > > + > > +err_get_hpd: > > + dev_err(mhdp->dev, "read hpd failed: %d\n", ret); > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + return ret; > > +} > > + > > +enum drm_connector_status cdns_mhdp8501_detect(struct > cdns_mhdp8501_device *mhdp) > > +{ > > + u8 hpd = 0xf; > > + > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > + if (hpd == 1) > > + return connector_status_connected; > > + else if (hpd == 0) > > + return connector_status_disconnected; > > + > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > > + return connector_status_unknown; > > +} > > + > > +static void hotplug_work_func(struct work_struct *work) > > +{ > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > + struct > cdns_mhdp8501_device, > > + > hotplug_work.work); > > + enum drm_connector_status status = > cdns_mhdp8501_detect(mhdp); > > + > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > + > > + if (status == connector_status_connected) { > > + /* Cable connected */ > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > + enable_irq(mhdp->irq[IRQ_OUT]); > > + } else if (status == connector_status_disconnected) { > > + /* Cable Disconnected */ > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > + enable_irq(mhdp->irq[IRQ_IN]); > > + } > > +} > > + > > +static irqreturn_t cdns_mhdp8501_irq_thread(int irq, void *data) > > +{ > > + struct cdns_mhdp8501_device *mhdp = data; > > + > > + disable_irq_nosync(irq); > > + > > + mod_delayed_work(system_wq, &mhdp->hotplug_work, > > + msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int cdns_mhdp8501_dt_parse(struct cdns_mhdp8501_device *mhdp, > > + struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct device_node *np = dev->of_node; > > + struct device_node *remote; > > + > > + remote = of_graph_get_remote_node(np, 1, 0); > > + if (!remote) { > > + dev_err(dev, "fail to get remote node\n"); > > + of_node_put(remote); > > + return -EINVAL; > > + } > > + > > + /* get connector type */ > > + if (of_device_is_compatible(remote, "hdmi-connector")) { > > + mhdp->connector_type = > DRM_MODE_CONNECTOR_HDMIA; > > + > > + } else if (of_device_is_compatible(remote, "dp-connector")) { > > + mhdp->connector_type = > DRM_MODE_CONNECTOR_DisplayPort; > > + > > + } else { > > + dev_err(dev, "Unknown connector type\n"); > > + of_node_put(remote); > > + return -EINVAL; > > + } > > + > > + of_node_put(remote); > > + return true; > > +} > > + > > +static void cdns_mhdp8501_add_bridge(struct cdns_mhdp8501_device > *mhdp) > > +{ > > + mhdp->bridge.type = mhdp->connector_type; > > + mhdp->bridge.driver_private = mhdp; > > + mhdp->bridge.of_node = mhdp->dev->of_node; > > + mhdp->bridge.vendor = "NXP"; > > + mhdp->bridge.product = "i.MX8"; > > + mhdp->bridge.ops = DRM_BRIDGE_OP_DETECT | > DRM_BRIDGE_OP_EDID | > > + DRM_BRIDGE_OP_HPD; > > + > > + if (mhdp->connector_type == DRM_MODE_CONNECTOR_HDMIA) { > > + mhdp->bridge.funcs = &cdns_hdmi_bridge_funcs; > > + mhdp->bridge.ops |= DRM_BRIDGE_OP_HDMI; > > + } else if (mhdp->connector_type == > DRM_MODE_CONNECTOR_DisplayPort) { > > + mhdp->bridge.funcs = &cdns_dp_bridge_funcs; > > + } else { > > + dev_err(mhdp->dev, "Unsupported connector type!\n"); > > + return; > > + } > > + > > + drm_bridge_add(&mhdp->bridge); > > +} > > + > > +static int cdns_mhdp8501_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct cdns_mhdp8501_device *mhdp; > > + struct resource *res; > > + enum phy_mode phy_mode; > > + u32 reg; > > + int ret; > > + > > + mhdp = devm_kzalloc(dev, sizeof(*mhdp), GFP_KERNEL); > > + if (!mhdp) > > + return -ENOMEM; > > + > > + mutex_init(&mhdp->mbox_mutex); > > + mhdp->dev = dev; > > + > > + INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func); > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (!res) > > + return -ENODEV; > > + > > + mhdp->regs = devm_ioremap(dev, res->start, resource_size(res)); > > + if (IS_ERR(mhdp->regs)) > > + return PTR_ERR(mhdp->regs); > > + > > + ret = cdns_mhdp8501_dt_parse(mhdp, pdev); > > + if (ret < 0) > > + return -EINVAL; > > + > > + mhdp->phy = devm_of_phy_get_by_index(dev, pdev->dev.of_node, > 0); > > + if (IS_ERR(mhdp->phy)) > > + return dev_err_probe(dev, PTR_ERR(mhdp->phy), "no PHY > configured\n"); > > + > > + mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in"); > > + if (mhdp->irq[IRQ_IN] < 0) > > + return dev_err_probe(dev, mhdp->irq[IRQ_IN], "No > plug_in irq number\n"); > > + > > + mhdp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out"); > > + if (mhdp->irq[IRQ_OUT] < 0) > > + return dev_err_probe(dev, mhdp->irq[IRQ_OUT], "No > plug_out irq number\n"); > > + > > + irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN); > > + ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN], > > + NULL, > cdns_mhdp8501_irq_thread, > > + IRQF_ONESHOT, > dev_name(dev), mhdp); > > + if (ret < 0) { > > + dev_err(dev, "can't claim irq %d\n", mhdp->irq[IRQ_IN]); > > + return -EINVAL; > > + } > > + > > + irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN); > > + ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT], > > + NULL, > cdns_mhdp8501_irq_thread, > > + IRQF_ONESHOT, > dev_name(dev), mhdp); > > + if (ret < 0) { > > + dev_err(dev, "can't claim irq %d\n", > mhdp->irq[IRQ_OUT]); > > + return -EINVAL; > > + } > > + > > + /* set default lane mapping */ > > + mhdp->lane_mapping = LANE_MAPPING_NORMAL; > > + > > + /* cdns_mhdp8501_dt_parse() ensures connector_type is valid */ > > + mhdp->plat_data = of_device_get_match_data(dev); > > + if (mhdp->connector_type == > DRM_MODE_CONNECTOR_DisplayPort) { > > + mhdp->lane_mapping = > mhdp->plat_data->dp_lane_mapping; > > + phy_mode = PHY_MODE_DP; > > + } else if (mhdp->connector_type == > DRM_MODE_CONNECTOR_HDMIA) { > > + mhdp->lane_mapping = > mhdp->plat_data->hdmi_lane_mapping; > > + phy_mode = PHY_MODE_HDMI; > > + } > > On imx8mq-zii-ultra board lane mapping doesn't follow your default setting. > Please add a "lane-mapping" property in the DT to allow to customized this > setting for each board. > You can make it optional and keep the default value when the property is > missing on the DT node. > OK, "lane-mapping" property will be added in the next version. Sandor > Regards, > Benjamin > > > + > > + dev_set_drvdata(dev, mhdp); > > + > > + /* init base struct for access mhdp mailbox */ > > + mhdp->base.dev = mhdp->dev; > > + mhdp->base.regs = mhdp->regs; > > + mhdp->base.mbox_mutex = &mhdp->mbox_mutex; > > + > > + if (mhdp->connector_type == > DRM_MODE_CONNECTOR_DisplayPort) { > > + drm_dp_aux_init(&mhdp->dp.aux); > > + mhdp->dp.aux.name = "mhdp8501_dp_aux"; > > + mhdp->dp.aux.dev = dev; > > + mhdp->dp.aux.transfer = cdns_dp_aux_transfer; > > + } > > + > > + /* Enable APB clock */ > > + mhdp->apb_clk = devm_clk_get(dev, NULL); > > + if (IS_ERR(mhdp->apb_clk)) > > + return dev_err_probe(dev, PTR_ERR(mhdp->apb_clk), > > + "couldn't get apb clk\n"); > > + > > + clk_prepare_enable(mhdp->apb_clk); > > + > > + /* > > + * Wait for the KEEP_ALIVE "message" on the first 8 bits. > > + * Updated each sched "tick" (~2ms) > > + */ > > + ret = readl_poll_timeout(mhdp->regs + KEEP_ALIVE, reg, > > + reg & CDNS_KEEP_ALIVE_MASK, 500, > > + CDNS_KEEP_ALIVE_TIMEOUT); > > + if (ret) { > > + dev_err(dev, "device didn't give any life sign: reg %d\n", > reg); > > + goto clk_disable; > > + } > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_init(mhdp->phy); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > + goto clk_disable; > > + } > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > + goto clk_disable; > > + } > > + > > + /* Enable cable hotplug detect */ > > + if (cdns_mhdp8501_read_hpd(mhdp)) > > + enable_irq(mhdp->irq[IRQ_OUT]); > > + else > > + enable_irq(mhdp->irq[IRQ_IN]); > > + > > + cdns_mhdp8501_add_bridge(mhdp); > > + > > + return 0; > > + > > +clk_disable: > > + clk_disable_unprepare(mhdp->apb_clk); > > + > > + return -EINVAL; > > +} > > + > > +static void cdns_mhdp8501_remove(struct platform_device *pdev) > > +{ > > + struct cdns_mhdp8501_device *mhdp = > platform_get_drvdata(pdev); > > + > > + if (mhdp->connector_type == > DRM_MODE_CONNECTOR_DisplayPort) > > + cdns_dp_aux_destroy(mhdp); > > + > > + drm_bridge_remove(&mhdp->bridge); > > + clk_disable_unprepare(mhdp->apb_clk); > > +} > > + > > +static struct mhdp8501_plat_data imx8mq_mhdp_drv_data = { > > + .hdmi_lane_mapping = LANE_MAPPING_FLIPPED, > > + .dp_lane_mapping = LANE_MAPPING_IMX8MQ_DP, > > +}; > > + > > +static const struct of_device_id cdns_mhdp8501_dt_ids[] = { > > + { .compatible = "fsl,imx8mq-mhdp8501", > > + .data = &imx8mq_mhdp_drv_data > > + }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, cdns_mhdp8501_dt_ids); > > + > > +static struct platform_driver cdns_mhdp8501_driver = { > > + .probe = cdns_mhdp8501_probe, > > + .remove = cdns_mhdp8501_remove, > > + .driver = { > > + .name = "cdns-mhdp8501", > > + .of_match_table = cdns_mhdp8501_dt_ids, > > + }, > > +}; > > + > > +module_platform_driver(cdns_mhdp8501_driver); > > + > > +MODULE_AUTHOR("Sandor Yu <sandor.yu@nxp.com>"); > > +MODULE_DESCRIPTION("Cadence MHDP8501 bridge driver"); > > +MODULE_LICENSE("GPL"); > > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > > new file mode 100644 > > index 000000000000..593071f36995 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h > > @@ -0,0 +1,367 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Cadence MHDP 8501 Common head file > > + * > > + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. > > + * > > + */ > > + > > +#ifndef _CDNS_MHDP8501_CORE_H_ > > +#define _CDNS_MHDP8501_CORE_H_ > > + > > +#include <drm/bridge/cdns-mhdp-helper.h> > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_connector.h> > > +#include <drm/display/drm_dp_helper.h> > > +#include <linux/bitops.h> > > + > > +#define ADDR_IMEM 0x10000 > > +#define ADDR_DMEM 0x20000 > > + > > +/* APB CFG addr */ > > +#define APB_CTRL 0 > > +#define XT_INT_CTRL 0x04 > > +#define MAILBOX_FULL_ADDR 0x08 > > +#define MAILBOX_EMPTY_ADDR 0x0c > > +#define MAILBOX0_WR_DATA 0x10 > > +#define MAILBOX0_RD_DATA 0x14 > > +#define KEEP_ALIVE 0x18 > > +#define VER_L 0x1c > > +#define VER_H 0x20 > > +#define VER_LIB_L_ADDR 0x24 > > +#define VER_LIB_H_ADDR 0x28 > > +#define SW_DEBUG_L 0x2c > > +#define SW_DEBUG_H 0x30 > > +#define MAILBOX_INT_MASK 0x34 > > +#define MAILBOX_INT_STATUS 0x38 > > +#define SW_CLK_L 0x3c > > +#define SW_CLK_H 0x40 > > +#define SW_EVENTS0 0x44 > > +#define SW_EVENTS1 0x48 > > +#define SW_EVENTS2 0x4c > > +#define SW_EVENTS3 0x50 > > +#define XT_OCD_CTRL 0x60 > > +#define APB_INT_MASK 0x6c > > +#define APB_STATUS_MASK 0x70 > > + > > +/* Source phy comp */ > > +#define PHY_DATA_SEL 0x0818 > > +#define LANES_CONFIG 0x0814 > > + > > +/* Source CAR Addr */ > > +#define SOURCE_HDTX_CAR 0x0900 > > +#define SOURCE_DPTX_CAR 0x0904 > > +#define SOURCE_PHY_CAR 0x0908 > > +#define SOURCE_CEC_CAR 0x090c > > +#define SOURCE_CBUS_CAR 0x0910 > > +#define SOURCE_PKT_CAR 0x0918 > > +#define SOURCE_AIF_CAR 0x091c > > +#define SOURCE_CIPHER_CAR 0x0920 > > +#define SOURCE_CRYPTO_CAR 0x0924 > > + > > +/* clock meters addr */ > > +#define CM_CTRL 0x0a00 > > +#define CM_I2S_CTRL 0x0a04 > > +#define CM_SPDIF_CTRL 0x0a08 > > +#define CM_VID_CTRL 0x0a0c > > +#define CM_LANE_CTRL 0x0a10 > > +#define I2S_NM_STABLE 0x0a14 > > +#define I2S_NCTS_STABLE 0x0a18 > > +#define SPDIF_NM_STABLE 0x0a1c > > +#define SPDIF_NCTS_STABLE 0x0a20 > > +#define NMVID_MEAS_STABLE 0x0a24 > > +#define I2S_MEAS 0x0a40 > > +#define SPDIF_MEAS 0x0a80 > > +#define NMVID_MEAS 0x0ac0 > > + > > +/* source vif addr */ > > +#define BND_HSYNC2VSYNC 0x0b00 > > +#define HSYNC2VSYNC_F1_L1 0x0b04 > > +#define HSYNC2VSYNC_STATUS 0x0b0c > > +#define HSYNC2VSYNC_POL_CTRL 0x0b10 > > + > > +/* MHDP TX_top_comp */ > > +#define SCHEDULER_H_SIZE 0x1000 > > +#define SCHEDULER_V_SIZE 0x1004 > > +#define HDTX_SIGNAL_FRONT_WIDTH 0x100c > > +#define HDTX_SIGNAL_SYNC_WIDTH 0x1010 > > +#define HDTX_SIGNAL_BACK_WIDTH 0x1014 > > +#define HDTX_CONTROLLER 0x1018 > > +#define HDTX_HPD 0x1020 > > +#define HDTX_CLOCK_REG_0 0x1024 > > +#define HDTX_CLOCK_REG_1 0x1028 > > + > > +/* DPTX hpd addr */ > > +#define HPD_IRQ_DET_MIN_TIMER 0x2100 > > +#define HPD_IRQ_DET_MAX_TIMER 0x2104 > > +#define HPD_UNPLGED_DET_MIN_TIMER 0x2108 > > +#define HPD_STABLE_TIMER 0x210c > > +#define HPD_FILTER_TIMER 0x2110 > > +#define HPD_EVENT_MASK 0x211c > > +#define HPD_EVENT_DET 0x2120 > > + > > +/* DPTX framer addr */ > > +#define DP_FRAMER_GLOBAL_CONFIG 0x2200 > > +#define DP_SW_RESET 0x2204 > > +#define DP_FRAMER_TU 0x2208 > > +#define DP_FRAMER_PXL_REPR 0x220c > > +#define DP_FRAMER_SP 0x2210 > > +#define AUDIO_PACK_CONTROL 0x2214 > > +#define DP_VC_TABLE(x) (0x2218 + ((x) << 2)) > > +#define DP_VB_ID 0x2258 > > +#define DP_MTPH_LVP_CONTROL 0x225c > > +#define DP_MTPH_SYMBOL_VALUES 0x2260 > > +#define DP_MTPH_ECF_CONTROL 0x2264 > > +#define DP_MTPH_ACT_CONTROL 0x2268 > > +#define DP_MTPH_STATUS 0x226c > > +#define DP_INTERRUPT_SOURCE 0x2270 > > +#define DP_INTERRUPT_MASK 0x2274 > > +#define DP_FRONT_BACK_PORCH 0x2278 > > +#define DP_BYTE_COUNT 0x227c > > + > > +/* DPTX stream addr */ > > +#define MSA_HORIZONTAL_0 0x2280 > > +#define MSA_HORIZONTAL_1 0x2284 > > +#define MSA_VERTICAL_0 0x2288 > > +#define MSA_VERTICAL_1 0x228c > > +#define MSA_MISC 0x2290 > > +#define STREAM_CONFIG 0x2294 > > +#define AUDIO_PACK_STATUS 0x2298 > > +#define VIF_STATUS 0x229c > > +#define PCK_STUFF_STATUS_0 0x22a0 > > +#define PCK_STUFF_STATUS_1 0x22a4 > > +#define INFO_PACK_STATUS 0x22a8 > > +#define RATE_GOVERNOR_STATUS 0x22ac > > +#define DP_HORIZONTAL 0x22b0 > > +#define DP_VERTICAL_0 0x22b4 > > +#define DP_VERTICAL_1 0x22b8 > > +#define DP_BLOCK_SDP 0x22bc > > + > > +/* DPTX glbl addr */ > > +#define DPTX_LANE_EN 0x2300 > > +#define DPTX_ENHNCD 0x2304 > > +#define DPTX_INT_MASK 0x2308 > > +#define DPTX_INT_STATUS 0x230c > > + > > +/* DP AUX Addr */ > > +#define DP_AUX_HOST_CONTROL 0x2800 > > +#define DP_AUX_INTERRUPT_SOURCE 0x2804 > > +#define DP_AUX_INTERRUPT_MASK 0x2808 > > +#define DP_AUX_SWAP_INVERSION_CONTROL 0x280c > > +#define DP_AUX_SEND_NACK_TRANSACTION 0x2810 > > +#define DP_AUX_CLEAR_RX 0x2814 > > +#define DP_AUX_CLEAR_TX 0x2818 > > +#define DP_AUX_TIMER_STOP 0x281c > > +#define DP_AUX_TIMER_CLEAR 0x2820 > > +#define DP_AUX_RESET_SW 0x2824 > > +#define DP_AUX_DIVIDE_2M 0x2828 > > +#define DP_AUX_TX_PREACHARGE_LENGTH 0x282c > > +#define DP_AUX_FREQUENCY_1M_MAX 0x2830 > > +#define DP_AUX_FREQUENCY_1M_MIN 0x2834 > > +#define DP_AUX_RX_PRE_MIN 0x2838 > > +#define DP_AUX_RX_PRE_MAX 0x283c > > +#define DP_AUX_TIMER_PRESET 0x2840 > > +#define DP_AUX_NACK_FORMAT 0x2844 > > +#define DP_AUX_TX_DATA 0x2848 > > +#define DP_AUX_RX_DATA 0x284c > > +#define DP_AUX_TX_STATUS 0x2850 > > +#define DP_AUX_RX_STATUS 0x2854 > > +#define DP_AUX_RX_CYCLE_COUNTER 0x2858 > > +#define DP_AUX_MAIN_STATES 0x285c > > +#define DP_AUX_MAIN_TIMER 0x2860 > > +#define DP_AUX_AFE_OUT 0x2864 > > + > > +/* source pif addr */ > > +#define SOURCE_PIF_WR_ADDR 0x30800 > > +#define SOURCE_PIF_WR_REQ 0x30804 > > +#define SOURCE_PIF_RD_ADDR 0x30808 > > +#define SOURCE_PIF_RD_REQ 0x3080c > > +#define SOURCE_PIF_DATA_WR 0x30810 > > +#define SOURCE_PIF_DATA_RD 0x30814 > > +#define SOURCE_PIF_FIFO1_FLUSH 0x30818 > > +#define SOURCE_PIF_FIFO2_FLUSH 0x3081c > > +#define SOURCE_PIF_STATUS 0x30820 > > +#define SOURCE_PIF_INTERRUPT_SOURCE 0x30824 > > +#define SOURCE_PIF_INTERRUPT_MASK 0x30828 > > +#define SOURCE_PIF_PKT_ALLOC_REG 0x3082c > > +#define SOURCE_PIF_PKT_ALLOC_WR_EN 0x30830 > > +#define SOURCE_PIF_SW_RESET 0x30834 > > + > > +#define LINK_TRAINING_NOT_ACTIV 0 > > +#define LINK_TRAINING_RUN 1 > > +#define LINK_TRAINING_RESTART 2 > > + > > +#define CONTROL_VIDEO_IDLE 0 > > +#define CONTROL_VIDEO_VALID 1 > > + > > +#define INTERLACE_FMT_DET BIT(12) > > +#define VIF_BYPASS_INTERLACE BIT(13) > > +#define TU_CNT_RST_EN BIT(15) > > +#define INTERLACE_DTCT_WIN 0x20 > > + > > +#define DP_FRAMER_SP_INTERLACE_EN BIT(2) > > +#define DP_FRAMER_SP_HSP BIT(1) > > +#define DP_FRAMER_SP_VSP BIT(0) > > + > > +/* Capability */ > > +#define AUX_HOST_INVERT 3 > > +#define FAST_LT_SUPPORT 1 > > +#define FAST_LT_NOT_SUPPORT 0 > > +#define LANE_MAPPING_NORMAL 0x1b > > +#define LANE_MAPPING_FLIPPED 0xe4 > > +#define LANE_MAPPING_IMX8MQ_DP 0xc6 > > +#define ENHANCED 1 > > +#define SCRAMBLER_EN BIT(4) > > + > > +#define FULL_LT_STARTED BIT(0) > > +#define FASE_LT_STARTED BIT(1) > > +#define CLK_RECOVERY_FINISHED BIT(2) > > +#define EQ_PHASE_FINISHED BIT(3) > > +#define FASE_LT_START_FINISHED BIT(4) > > +#define CLK_RECOVERY_FAILED BIT(5) > > +#define EQ_PHASE_FAILED BIT(6) > > +#define FASE_LT_FAILED BIT(7) > > + > > +#define TU_SIZE 30 > > +#define CDNS_DP_MAX_LINK_RATE 540000 > > + > > +#define F_HDMI_ENCODING(x) (((x) & ((1 << 2) - 1)) << 16) > > +#define F_VIF_DATA_WIDTH(x) (((x) & ((1 << 2) - 1)) << 2) > > +#define F_HDMI_MODE(x) (((x) & ((1 << 2) - 1)) << 0) > > +#define F_GCP_EN(x) (((x) & ((1 << 1) - 1)) << 12) > > +#define F_DATA_EN(x) (((x) & ((1 << 1) - 1)) << 15) > > +#define F_CLEAR_AVMUTE(x) (((x) & ((1 << 1) - 1)) << 14) > > +#define F_HDMI2_PREAMBLE_EN(x) (((x) & ((1 << 1) - 1)) << 18) > > +#define F_PIC_3D(x) (((x) & ((1 << 4) - 1)) << 7) > > +#define F_BCH_EN(x) (((x) & ((1 << 1) - 1)) << 11) > > +#define F_SOURCE_PHY_MHDP_SEL(x) (((x) & ((1 << 2) - 1)) << 3) > > +#define F_HPD_VALID_WIDTH(x) (((x) & ((1 << 12) - 1)) << 0) > > +#define F_HPD_GLITCH_WIDTH(x) (((x) & ((1 << 8) - 1)) << 12) > > +#define F_HDMI2_CTRL_IL_MODE(x) (((x) & ((1 << 1) - 1)) << 19) > > +#define F_SOURCE_PHY_LANE0_SWAP(x) (((x) & ((1 << 2) - 1)) << 0) > > +#define F_SOURCE_PHY_LANE1_SWAP(x) (((x) & ((1 << 2) - 1)) << 2) > > +#define F_SOURCE_PHY_LANE2_SWAP(x) (((x) & ((1 << 2) - 1)) << 4) > > +#define F_SOURCE_PHY_LANE3_SWAP(x) (((x) & ((1 << 2) - 1)) << 6) > > +#define F_SOURCE_PHY_COMB_BYPASS(x) (((x) & ((1 << 1) - 1)) << 21) > > +#define F_SOURCE_PHY_20_10(x) (((x) & ((1 << 1) - 1)) << 22) > > +#define F_PKT_ALLOC_ADDRESS(x) (((x) & ((1 << 4) - 1)) << 0) > > +#define F_ACTIVE_IDLE_TYPE(x) (((x) & ((1 << 1) - 1)) << 17) > > +#define F_FIFO1_FLUSH(x) (((x) & ((1 << 1) - 1)) << 0) > > +#define F_PKT_ALLOC_WR_EN(x) (((x) & ((1 << 1) - 1)) << 0) > > +#define F_DATA_WR(x) (x) > > +#define F_WR_ADDR(x) (((x) & ((1 << 4) - 1)) << 0) > > +#define F_HOST_WR(x) (((x) & ((1 << 1) - 1)) << 0) > > +#define F_TYPE_VALID(x) (((x) & ((1 << 1) - 1)) << 16) > > +#define F_PACKET_TYPE(x) (((x) & ((1 << 8) - 1)) << 8) > > + > > +/* Reference cycles when using lane clock as reference */ > > +#define LANE_REF_CYC 0x8000 > > + > > +/* HPD Debounce */ > > +#define HOTPLUG_DEBOUNCE_MS 200 > > + > > +/* HPD IRQ Index */ > > +#define IRQ_IN 0 > > +#define IRQ_OUT 1 > > +#define IRQ_NUM 2 > > + > > +/* FW check alive timeout */ > > +#define CDNS_KEEP_ALIVE_TIMEOUT 2000 > > +#define CDNS_KEEP_ALIVE_MASK GENMASK(7, 0) > > + > > +enum voltage_swing_level { > > + VOLTAGE_LEVEL_0, > > + VOLTAGE_LEVEL_1, > > + VOLTAGE_LEVEL_2, > > + VOLTAGE_LEVEL_3, > > +}; > > + > > +enum pre_emphasis_level { > > + PRE_EMPHASIS_LEVEL_0, > > + PRE_EMPHASIS_LEVEL_1, > > + PRE_EMPHASIS_LEVEL_2, > > + PRE_EMPHASIS_LEVEL_3, > > +}; > > + > > +enum pattern_set { > > + PTS1 = BIT(0), > > + PTS2 = BIT(1), > > + PTS3 = BIT(2), > > + PTS4 = BIT(3), > > + DP_NONE = BIT(4) > > +}; > > + > > +enum vic_color_depth { > > + BCS_6 = 0x1, > > + BCS_8 = 0x2, > > + BCS_10 = 0x4, > > + BCS_12 = 0x8, > > + BCS_16 = 0x10, > > +}; > > + > > +enum vic_bt_type { > > + BT_601 = 0x0, > > + BT_709 = 0x1, > > +}; > > + > > +enum { > > + MODE_DVI, > > + MODE_HDMI_1_4, > > + MODE_HDMI_2_0, > > +}; > > + > > +struct video_info { > > + int bpc; > > + int color_fmt; > > +}; > > + > > +struct mhdp8501_plat_data { > > + int hdmi_lane_mapping; > > + int dp_lane_mapping; > > +}; > > + > > +struct cdns_mhdp8501_device { > > + struct cdns_mhdp_base base; > > + > > + struct device *dev; > > + void __iomem *regs; > > + struct drm_connector *curr_conn; > > + struct drm_bridge bridge; > > + struct clk *apb_clk; > > + struct phy *phy; > > + > > + struct video_info video_info; > > + struct drm_display_mode mode; > > + > > + int irq[IRQ_NUM]; > > + struct delayed_work hotplug_work; > > + int connector_type; > > + u32 lane_mapping; > > + > > + /* protect mailbox communications with the firmware */ > > + struct mutex mbox_mutex; > > + > > + const struct mhdp8501_plat_data *plat_data; > > + > > + union { > > + struct _dp_data { > > + u32 rate; > > + u8 num_lanes; > > + struct drm_dp_aux aux; > > + u8 dpcd[DP_RECEIVER_CAP_SIZE]; > > + } dp; > > + struct _hdmi_data { > > + u32 hdmi_type; > > + unsigned long long char_rate; > > + } hdmi; > > + }; > > +}; > > + > > +extern const struct drm_bridge_funcs cdns_dp_bridge_funcs; > > +extern const struct drm_bridge_funcs cdns_hdmi_bridge_funcs; > > + > > +ssize_t cdns_dp_aux_transfer(struct drm_dp_aux *aux, struct > drm_dp_aux_msg *msg); > > +enum drm_connector_status cdns_mhdp8501_detect(struct > cdns_mhdp8501_device *mhdp); > > +int cdns_dp_aux_destroy(struct cdns_mhdp8501_device *mhdp); > > + > > +#endif > > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > > new file mode 100644 > > index 000000000000..d8cc31daf322 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c > > @@ -0,0 +1,700 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Cadence MHDP8501 DisplayPort(DP) bridge driver > > + * > > + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. > > + * > > + */ > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_print.h> > > +#include <linux/phy/phy.h> > > +#include <linux/phy/phy-dp.h> > > + > > +#include "cdns-mhdp8501-core.h" > > + > > +#define LINK_TRAINING_TIMEOUT_MS 500 > > +#define LINK_TRAINING_RETRY_MS 20 > > + > > +ssize_t cdns_dp_aux_transfer(struct drm_dp_aux *aux, > > + struct drm_dp_aux_msg *msg) > > +{ > > + struct cdns_mhdp8501_device *mhdp = dev_get_drvdata(aux->dev); > > + bool native = msg->request & (DP_AUX_NATIVE_WRITE & > DP_AUX_NATIVE_READ); > > + int ret; > > + > > + /* Ignore address only message */ > > + if (!msg->size || !msg->buffer) { > > + msg->reply = native ? > > + DP_AUX_NATIVE_REPLY_ACK : > DP_AUX_I2C_REPLY_ACK; > > + return msg->size; > > + } > > + > > + if (!native) { > > + dev_err(mhdp->dev, "%s: only native messages > supported\n", __func__); > > + return -EINVAL; > > + } > > + > > + /* msg sanity check */ > > + if (msg->size > DP_AUX_MAX_PAYLOAD_BYTES) { > > + dev_err(mhdp->dev, "%s: invalid msg: size(%zu), > request(%x)\n", > > + __func__, msg->size, (unsigned > int)msg->request); > > + return -EINVAL; > > + } > > + > > + if (msg->request == DP_AUX_NATIVE_WRITE) { > > + const u8 *buf = msg->buffer; > > + int i; > > + > > + for (i = 0; i < msg->size; ++i) { > > + ret = cdns_mhdp_dpcd_write(&mhdp->base, > > + msg->address + > i, buf[i]); > > + if (ret < 0) { > > + dev_err(mhdp->dev, "Failed to write > DPCD\n"); > > + return ret; > > + } > > + } > > + msg->reply = DP_AUX_NATIVE_REPLY_ACK; > > + return msg->size; > > + } > > + > > + if (msg->request == DP_AUX_NATIVE_READ) { > > + ret = cdns_mhdp_dpcd_read(&mhdp->base, msg->address, > > + msg->buffer, msg->size); > > + if (ret < 0) > > + return ret; > > + msg->reply = DP_AUX_NATIVE_REPLY_ACK; > > + return msg->size; > > + } > > + return 0; > > +} > > + > > +int cdns_dp_aux_destroy(struct cdns_mhdp8501_device *mhdp) > > +{ > > + drm_dp_aux_unregister(&mhdp->dp.aux); > > + > > + return 0; > > +} > > + > > +static int cdns_dp_get_msa_misc(struct video_info *video) > > +{ > > + u32 msa_misc; > > + u8 color_space = 0; > > + u8 bpc = 0; > > + > > + switch (video->color_fmt) { > > + /* set YUV default color space conversion to BT601 */ > > + case DRM_COLOR_FORMAT_YCBCR444: > > + color_space = 6 + BT_601 * 8; > > + break; > > + case DRM_COLOR_FORMAT_YCBCR422: > > + color_space = 5 + BT_601 * 8; > > + break; > > + case DRM_COLOR_FORMAT_YCBCR420: > > + color_space = 5; > > + break; > > + case DRM_COLOR_FORMAT_RGB444: > > + default: > > + color_space = 0; > > + break; > > + }; > > + > > + switch (video->bpc) { > > + case 6: > > + bpc = 0; > > + break; > > + case 10: > > + bpc = 2; > > + break; > > + case 12: > > + bpc = 3; > > + break; > > + case 16: > > + bpc = 4; > > + break; > > + case 8: > > + default: > > + bpc = 1; > > + break; > > + }; > > + > > + msa_misc = (bpc << 5) | (color_space << 1); > > + > > + return msa_misc; > > +} > > + > > +static int cdns_dp_config_video(struct cdns_mhdp8501_device *mhdp) > > +{ > > + struct video_info *video = &mhdp->video_info; > > + struct drm_display_mode *mode = &mhdp->mode; > > + bool h_sync_polarity, v_sync_polarity; > > + u64 symbol; > > + u32 val, link_rate, rem; > > + u8 bit_per_pix, tu_size_reg = TU_SIZE; > > + int ret; > > + > > + bit_per_pix = (video->color_fmt == > DRM_COLOR_FORMAT_YCBCR422) ? > > + (video->bpc * 2) : (video->bpc * 3); > > + > > + link_rate = mhdp->dp.rate / 1000; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, BND_HSYNC2VSYNC, > VIF_BYPASS_INTERLACE); > > + if (ret) > > + goto err_config_video; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, > HSYNC2VSYNC_POL_CTRL, 0); > > + if (ret) > > + goto err_config_video; > > + > > + /* > > + * get a best tu_size and valid symbol: > > + * 1. chose Lclk freq(162Mhz, 270Mhz, 540Mhz), set TU to 32 > > + * 2. calculate VS(valid symbol) = TU * Pclk * Bpp / (Lclk * Lanes) > > + * 3. if VS > *.85 or VS < *.1 or VS < 2 or TU < VS + 4, then set > > + * TU += 2 and repeat 2nd step. > > + */ > > + do { > > + tu_size_reg += 2; > > + symbol = tu_size_reg * mode->clock * bit_per_pix; > > + do_div(symbol, mhdp->dp.num_lanes * link_rate * 8); > > + rem = do_div(symbol, 1000); > > + if (tu_size_reg > 64) { > > + ret = -EINVAL; > > + dev_err(mhdp->dev, "tu error, clk:%d, lanes:%d, > rate:%d\n", > > + mode->clock, mhdp->dp.num_lanes, > link_rate); > > + goto err_config_video; > > + } > > + } while ((symbol <= 1) || (tu_size_reg - symbol < 4) || > > + (rem > 850) || (rem < 100)); > > + > > + val = symbol + (tu_size_reg << 8); > > + val |= TU_CNT_RST_EN; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_TU, val); > > + if (ret) > > + goto err_config_video; > > + > > + /* set the FIFO Buffer size */ > > + val = div_u64(mode->clock * (symbol + 1), 1000) + link_rate; > > + val /= (mhdp->dp.num_lanes * link_rate); > > + val = div_u64(8 * (symbol + 1), bit_per_pix) - val; > > + val += 2; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VC_TABLE(15), val); > > + > > + switch (video->bpc) { > > + case 6: > > + val = BCS_6; > > + break; > > + case 10: > > + val = BCS_10; > > + break; > > + case 12: > > + val = BCS_12; > > + break; > > + case 16: > > + val = BCS_16; > > + break; > > + case 8: > > + default: > > + val = BCS_8; > > + break; > > + }; > > + > > + val += video->color_fmt << 8; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_PXL_REPR, > val); > > + if (ret) > > + goto err_config_video; > > + > > + v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC); > > + h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC); > > + > > + val = h_sync_polarity ? DP_FRAMER_SP_HSP : 0; > > + val |= v_sync_polarity ? DP_FRAMER_SP_VSP : 0; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_SP, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = (mode->hsync_start - mode->hdisplay) << 16; > > + val |= mode->htotal - mode->hsync_end; > > + ret = cdns_mhdp_reg_write(&mhdp->base, > DP_FRONT_BACK_PORCH, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->hdisplay * bit_per_pix / 8; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_BYTE_COUNT, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->htotal | ((mode->htotal - mode->hsync_start) << 16); > > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_HORIZONTAL_0, > val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->hsync_end - mode->hsync_start; > > + val |= (mode->hdisplay << 16) | (h_sync_polarity << 15); > > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_HORIZONTAL_1, > val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->vtotal; > > + val |= (mode->vtotal - mode->vsync_start) << 16; > > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_VERTICAL_0, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->vsync_end - mode->vsync_start; > > + val |= (mode->vdisplay << 16) | (v_sync_polarity << 15); > > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_VERTICAL_1, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = cdns_dp_get_msa_misc(video); > > + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_MISC, val); > > + if (ret) > > + goto err_config_video; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, STREAM_CONFIG, 1); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->hsync_end - mode->hsync_start; > > + val |= mode->hdisplay << 16; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_HORIZONTAL, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->vdisplay; > > + val |= (mode->vtotal - mode->vsync_start) << 16; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VERTICAL_0, val); > > + if (ret) > > + goto err_config_video; > > + > > + val = mode->vtotal; > > + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VERTICAL_1, val); > > + if (ret) > > + goto err_config_video; > > + > > + ret = cdns_mhdp_dp_reg_write_bit(&mhdp->base, DP_VB_ID, 2, 1, > 0); > > + > > +err_config_video: > > + if (ret) > > + dev_err(mhdp->dev, "config video failed: %d\n", ret); > > + return ret; > > +} > > + > > +static void cdns_dp_pixel_clk_reset(struct cdns_mhdp8501_device *mhdp) > > +{ > > + u32 val; > > + > > + /* reset pixel clk */ > > + cdns_mhdp_reg_read(&mhdp->base, SOURCE_HDTX_CAR, &val); > > + cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, val & > 0xFD); > > + cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, val); > > +} > > + > > +static int cdns_dp_set_video_status(struct cdns_mhdp8501_device *mhdp, > int active) > > +{ > > + u8 msg; > > + int ret; > > + > > + msg = !!active; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_DP_TX, DPTX_SET_VIDEO, > > + sizeof(msg), &msg); > > + if (ret) > > + dev_err(mhdp->dev, "set video status failed: %d\n", ret); > > + > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + return ret; > > +} > > + > > +static int cdns_dp_training_start(struct cdns_mhdp8501_device *mhdp) > > +{ > > + unsigned long timeout; > > + u8 msg, event[2]; > > + int ret; > > + > > + msg = LINK_TRAINING_RUN; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + /* start training */ > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + DPTX_TRAINING_CONTROL, > sizeof(msg), &msg); > > + if (ret) > > + goto err_training_start; > > + > > + timeout = jiffies + msecs_to_jiffies(LINK_TRAINING_TIMEOUT_MS); > > + while (time_before(jiffies, timeout)) { > > + msleep(LINK_TRAINING_RETRY_MS); > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + DPTX_READ_EVENT, 0, > NULL); > > + if (ret) > > + goto err_training_start; > > + > > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + > DPTX_READ_EVENT, sizeof(event)); > > + if (ret) > > + goto err_training_start; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, event, > sizeof(event)); > > + if (ret) > > + goto err_training_start; > > + > > + if (event[1] & CLK_RECOVERY_FAILED) { > > + dev_err(mhdp->dev, "clock recovery failed\n"); > > + } else if (event[1] & EQ_PHASE_FINISHED) { > > + mutex_unlock(&mhdp->mbox_mutex); > > + return 0; > > + } > > + } > > + > > + ret = -ETIMEDOUT; > > + > > +err_training_start: > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + dev_err(mhdp->dev, "training failed: %d\n", ret); > > + return ret; > > +} > > + > > +static int cdns_dp_get_training_status(struct cdns_mhdp8501_device > *mhdp) > > +{ > > + u8 status[13]; > > + int ret; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + DPTX_READ_LINK_STAT, 0, > NULL); > > + if (ret) > > + goto err_get_training_status; > > + > > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + DPTX_READ_LINK_STAT, > > + sizeof(status)); > > + if (ret) > > + goto err_get_training_status; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, status, > sizeof(status)); > > + if (ret) > > + goto err_get_training_status; > > + > > + mhdp->dp.rate = drm_dp_bw_code_to_link_rate(status[0]); > > + mhdp->dp.num_lanes = status[1]; > > + > > +err_get_training_status: > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + if (ret) > > + dev_err(mhdp->dev, "get training status failed: %d\n", ret); > > + return ret; > > +} > > + > > +static int cdns_dp_train_link(struct cdns_mhdp8501_device *mhdp) > > +{ > > + int ret; > > + > > + ret = cdns_dp_training_start(mhdp); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed to start training %d\n", ret); > > + return ret; > > + } > > + > > + ret = cdns_dp_get_training_status(mhdp); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed to get training stat %d\n", > ret); > > + return ret; > > + } > > + > > + dev_dbg(mhdp->dev, "rate:0x%x, lanes:%d\n", mhdp->dp.rate, > > + mhdp->dp.num_lanes); > > + return ret; > > +} > > + > > +static int cdns_dp_set_host_cap(struct cdns_mhdp8501_device *mhdp) > > +{ > > + u8 msg[8]; > > + int ret; > > + > > + msg[0] = drm_dp_link_rate_to_bw_code(mhdp->dp.rate); > > + msg[1] = mhdp->dp.num_lanes | SCRAMBLER_EN; > > + msg[2] = VOLTAGE_LEVEL_2; > > + msg[3] = PRE_EMPHASIS_LEVEL_3; > > + msg[4] = PTS1 | PTS2 | PTS3 | PTS4; > > + msg[5] = FAST_LT_NOT_SUPPORT; > > + msg[6] = mhdp->lane_mapping; > > + msg[7] = ENHANCED; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + DPTX_SET_HOST_CAPABILITIES, > > + sizeof(msg), msg); > > + > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + if (ret) > > + dev_err(mhdp->dev, "set host cap failed: %d\n", ret); > > + > > + return ret; > > +} > > + > > +static int cdns_dp_get_edid_block(void *data, u8 *edid, > > + unsigned int block, size_t length) > > +{ > > + struct cdns_mhdp8501_device *mhdp = data; > > + u8 msg[2], reg[2], i; > > + int ret; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + for (i = 0; i < 4; i++) { > > + msg[0] = block / 2; > > + msg[1] = block % 2; > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + DPTX_GET_EDID, > sizeof(msg), msg); > > + if (ret) > > + continue; > > + > > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, > MB_MODULE_ID_DP_TX, > > + > DPTX_GET_EDID, > > + sizeof(reg) + > length); > > + if (ret) > > + continue; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, > sizeof(reg)); > > + if (ret) > > + continue; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, > length); > > + if (ret) > > + continue; > > + > > + if (reg[0] == length && reg[1] == block / 2) > > + break; > > + } > > + > > + if (ret) > > + dev_err(mhdp->dev, "get block[%d] edid failed: %d\n", > block, ret); > > + > > + mutex_unlock(&mhdp->mbox_mutex); > > + return ret; > > +} > > + > > +static void cdns_dp_mode_set(struct cdns_mhdp8501_device *mhdp) > > +{ > > + union phy_configure_opts phy_cfg; > > + int ret; > > + > > + cdns_dp_pixel_clk_reset(mhdp); > > + > > + /* Get DP Caps */ > > + ret = drm_dp_dpcd_read(&mhdp->dp.aux, DP_DPCD_REV, > mhdp->dp.dpcd, > > + DP_RECEIVER_CAP_SIZE); > > + if (ret < 0) { > > + dev_err(mhdp->dev, "Failed to get caps %d\n", ret); > > + return; > > + } > > + > > + mhdp->dp.rate = drm_dp_max_link_rate(mhdp->dp.dpcd); > > + mhdp->dp.num_lanes = drm_dp_max_lane_count(mhdp->dp.dpcd); > > + > > + /* check the max link rate */ > > + if (mhdp->dp.rate > CDNS_DP_MAX_LINK_RATE) > > + mhdp->dp.rate = CDNS_DP_MAX_LINK_RATE; > > + > > + phy_cfg.dp.lanes = mhdp->dp.num_lanes; > > + phy_cfg.dp.link_rate = mhdp->dp.rate; > > + phy_cfg.dp.set_lanes = false; > > + phy_cfg.dp.set_rate = false; > > + phy_cfg.dp.set_voltages = true; > > + > > + /* Mailbox protect for DP PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_configure(mhdp->phy, &phy_cfg); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > > + __func__, ret); > > + return; > > + } > > + > > + /* Video off */ > > + ret = cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_IDLE); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed to valid video %d\n", ret); > > + return; > > + } > > + > > + /* Line swapping */ > > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 > | mhdp->lane_mapping); > > + > > + /* Set DP host capability */ > > + ret = cdns_dp_set_host_cap(mhdp); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed to set host cap %d\n", ret); > > + return; > > + } > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, > DP_AUX_SWAP_INVERSION_CONTROL, > > + AUX_HOST_INVERT); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed to set host invert %d\n", ret); > > + return; > > + } > > + > > + ret = cdns_dp_config_video(mhdp); > > + if (ret) > > + dev_err(mhdp->dev, "Failed to config video %d\n", ret); > > +} > > + > > +static int cdns_dp_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { > > + dev_err(mhdp->dev, "do not support creating a > drm_connector\n"); > > + return -EINVAL; > > + } > > + > > + mhdp->dp.aux.drm_dev = bridge->dev; > > + > > + return drm_dp_aux_register(&mhdp->dp.aux); > > +} > > + > > +static enum drm_mode_status > > +cdns_dp_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_info *info, > > + const struct drm_display_mode *mode) > > +{ > > + enum drm_mode_status mode_status = MODE_OK; > > + > > + /* We don't support double-clocked modes */ > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > + return MODE_BAD; > > + > > + /* MAX support pixel clock rate 594MHz */ > > + if (mode->clock > 594000) > > + return MODE_CLOCK_HIGH; > > + > > + if (mode->hdisplay > 3840) > > + return MODE_BAD_HVALUE; > > + > > + if (mode->vdisplay > 2160) > > + return MODE_BAD_VVALUE; > > + > > + return mode_status; > > +} > > + > > +static enum drm_connector_status > > +cdns_dp_bridge_detect(struct drm_bridge *bridge) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + return cdns_mhdp8501_detect(mhdp); > > +} > > + > > +static const struct drm_edid > > +*cdns_dp_bridge_edid_read(struct drm_bridge *bridge, > > + struct drm_connector *connector) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + return drm_edid_read_custom(connector, cdns_dp_get_edid_block, > mhdp); > > +} > > + > > +static void cdns_dp_bridge_atomic_disable(struct drm_bridge *bridge, > > + struct drm_bridge_state > *old_state) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_IDLE); > > + mhdp->curr_conn = NULL; > > + > > + /* Mailbox protect for DP PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + phy_power_off(mhdp->phy); > > + mutex_unlock(&mhdp->mbox_mutex); > > +} > > + > > +static void cdns_dp_bridge_atomic_enable(struct drm_bridge *bridge, > > + struct drm_bridge_state > *old_state) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + struct drm_atomic_state *state = old_state->base.state; > > + struct drm_connector *connector; > > + struct video_info *video = &mhdp->video_info; > > + struct drm_crtc_state *crtc_state; > > + struct drm_connector_state *conn_state; > > + const struct drm_display_mode *mode; > > + int ret; > > + > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > + > bridge->encoder); > > + if (WARN_ON(!connector)) > > + return; > > + > > + mhdp->curr_conn = connector; > > + > > + conn_state = drm_atomic_get_new_connector_state(state, > connector); > > + if (WARN_ON(!conn_state)) > > + return; > > + > > + crtc_state = drm_atomic_get_new_crtc_state(state, > conn_state->crtc); > > + if (WARN_ON(!crtc_state)) > > + return; > > + > > + mode = &crtc_state->adjusted_mode; > > + > > + switch (connector->display_info.bpc) { > > + case 10: > > + video->bpc = 10; > > + break; > > + case 6: > > + video->bpc = 6; > > + break; > > + default: > > + video->bpc = 8; > > + break; > > + } > > + > > + /* The only currently supported format */ > > + video->color_fmt = DRM_COLOR_FORMAT_RGB444; > > + > > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > > + mode->hdisplay, mode->vdisplay, mode->clock); > > + memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode)); > > + > > + cdns_dp_mode_set(mhdp); > > + > > + /* Link trainning */ > > + ret = cdns_dp_train_link(mhdp); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed link train %d\n", ret); > > + return; > > + } > > + > > + ret = cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_VALID); > > + if (ret) { > > + dev_err(mhdp->dev, "Failed to valid video %d\n", ret); > > + return; > > + } > > +} > > + > > +const struct drm_bridge_funcs cdns_dp_bridge_funcs = { > > + .attach = cdns_dp_bridge_attach, > > + .detect = cdns_dp_bridge_detect, > > + .edid_read = cdns_dp_bridge_edid_read, > > + .mode_valid = cdns_dp_bridge_mode_valid, > > + .atomic_enable = cdns_dp_bridge_atomic_enable, > > + .atomic_disable = cdns_dp_bridge_atomic_disable, > > + .atomic_duplicate_state = > drm_atomic_helper_bridge_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > > + .atomic_reset = drm_atomic_helper_bridge_reset, > > +}; > > diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > > new file mode 100644 > > index 000000000000..834ca9788a5f > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c > > @@ -0,0 +1,595 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Cadence MHDP8501 HDMI bridge driver > > + * > > + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. > > + * > > + */ > > +#include <drm/display/drm_hdmi_helper.h> > > +#include <drm/display/drm_hdmi_state_helper.h> > > +#include <drm/display/drm_scdc_helper.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_print.h> > > +#include <linux/phy/phy.h> > > +#include <linux/phy/phy-hdmi.h> > > + > > +#include "cdns-mhdp8501-core.h" > > + > > +/** > > + * cdns_hdmi_config_infoframe() - fill the HDMI infoframe > > + * @mhdp: phandle to mhdp device. > > + * @entry_id: The packet memory address in which the data is written. > > + * @len: length of infoframe. > > + * @buf: point to InfoFrame Packet. > > + * @type: Packet Type of InfoFrame in HDMI Specification. > > + * > > + */ > > +static void cdns_hdmi_config_infoframe(struct cdns_mhdp8501_device > *mhdp, > > + u8 entry_id, u8 len, > > + const u8 *buf, u8 type) > > +{ > > + u8 packet[32], packet_len = 32; > > + u32 packet32, len32; > > + u32 val, i; > > + > > + /* > > + * only support 32 bytes now > > + * packet[0] = 0 > > + * packet[1-3] = HB[0-2] InfoFrame Packet Header > > + * packet[4-31 = PB[0-27] InfoFrame Packet Contents > > + */ > > + if (len >= (packet_len - 1)) > > + return; > > + packet[0] = 0; > > + memcpy(packet + 1, buf, len); > > + > > + /* invalidate entry */ > > + val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id); > > + writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG); > > + writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + > SOURCE_PIF_PKT_ALLOC_WR_EN); > > + > > + /* flush fifo 1 */ > > + writel(F_FIFO1_FLUSH(1), mhdp->regs + SOURCE_PIF_FIFO1_FLUSH); > > + > > + /* write packet into memory */ > > + len32 = packet_len / 4; > > + for (i = 0; i < len32; i++) { > > + packet32 = get_unaligned_le32(packet + 4 * i); > > + writel(F_DATA_WR(packet32), mhdp->regs + > SOURCE_PIF_DATA_WR); > > + } > > + > > + /* write entry id */ > > + writel(F_WR_ADDR(entry_id), mhdp->regs + > SOURCE_PIF_WR_ADDR); > > + > > + /* write request */ > > + writel(F_HOST_WR(1), mhdp->regs + SOURCE_PIF_WR_REQ); > > + > > + /* update entry */ > > + val = F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) | > > + F_PACKET_TYPE(type) | > F_PKT_ALLOC_ADDRESS(entry_id); > > + writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG); > > + > > + writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + > SOURCE_PIF_PKT_ALLOC_WR_EN); > > +} > > + > > +static int cdns_hdmi_get_edid_block(void *data, u8 *edid, > > + u32 block, size_t length) > > +{ > > + struct cdns_mhdp8501_device *mhdp = data; > > + u8 msg[2], reg[5], i; > > + int ret; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + for (i = 0; i < 4; i++) { > > + msg[0] = block / 2; > > + msg[1] = block % 2; > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_HDMI_TX, HDMI_TX_EDID, > > + sizeof(msg), msg); > > + if (ret) > > + continue; > > + > > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, > MB_MODULE_ID_HDMI_TX, > > + > HDMI_TX_EDID, sizeof(reg) + length); > > + if (ret) > > + continue; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, > sizeof(reg)); > > + if (ret) > > + continue; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, > length); > > + if (ret) > > + continue; > > + > > + if ((reg[3] << 8 | reg[4]) == length) > > + break; > > + } > > + > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + if (ret) > > + dev_err(mhdp->dev, "get block[%d] edid failed: %d\n", > block, ret); > > + return ret; > > +} > > + > > +static int cdns_hdmi_scdc_write(struct cdns_mhdp8501_device *mhdp, u8 > addr, u8 value) > > +{ > > + u8 msg[5], reg[5]; > > + int ret; > > + > > + msg[0] = 0x54; > > + msg[1] = addr; > > + msg[2] = 0; > > + msg[3] = 1; > > + msg[4] = value; > > + > > + mutex_lock(&mhdp->mbox_mutex); > > + > > + ret = cdns_mhdp_mailbox_send(&mhdp->base, > MB_MODULE_ID_HDMI_TX, HDMI_TX_WRITE, > > + sizeof(msg), msg); > > + if (ret) > > + goto err_scdc_write; > > + > > + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, > MB_MODULE_ID_HDMI_TX, > > + HDMI_TX_WRITE, > sizeof(reg)); > > + if (ret) > > + goto err_scdc_write; > > + > > + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, > sizeof(reg)); > > + if (ret) > > + goto err_scdc_write; > > + > > + if (reg[0] != 0) > > + ret = -EINVAL; > > + > > +err_scdc_write: > > + > > + mutex_unlock(&mhdp->mbox_mutex); > > + > > + if (ret) > > + dev_err(mhdp->dev, "scdc write failed: %d\n", ret); > > + return ret; > > +} > > + > > +static int cdns_hdmi_ctrl_init(struct cdns_mhdp8501_device *mhdp) > > +{ > > + unsigned long long char_rate = mhdp->hdmi.char_rate; > > + u32 protocol = mhdp->hdmi.hdmi_type; > > + u32 reg0, reg1, val; > > + int ret; > > + > > + /* Set PHY to HDMI data */ > > + ret = cdns_mhdp_reg_write(&mhdp->base, PHY_DATA_SEL, > F_SOURCE_PHY_MHDP_SEL(1)); > > + if (ret < 0) > > + return ret; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_HPD, > > + F_HPD_VALID_WIDTH(4) | > F_HPD_GLITCH_WIDTH(0)); > > + if (ret < 0) > > + return ret; > > + > > + /* open CARS */ > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_PHY_CAR, 0xF); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, > 0xFF); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_PKT_CAR, 0xF); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_AIF_CAR, 0xF); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CIPHER_CAR, > 0xF); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CRYPTO_CAR, > 0xF); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CEC_CAR, 3); > > + if (ret < 0) > > + return ret; > > + > > + reg0 = 0x7c1f; > > + reg1 = 0x7c1f; > > + if (protocol == MODE_HDMI_2_0 && char_rate >= 340000000) { > > + reg0 = 0; > > + reg1 = 0xFFFFF; > > + } > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CLOCK_REG_0, > reg0); > > + if (ret < 0) > > + return ret; > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CLOCK_REG_1, > reg1); > > + if (ret < 0) > > + return ret; > > + > > + /* set HDMI mode and preemble mode data enable */ > > + val = F_HDMI_MODE(protocol) | F_HDMI2_PREAMBLE_EN(1) | > > + F_DATA_EN(1) | F_HDMI2_CTRL_IL_MODE(1) | F_BCH_EN(1) > | > > + F_PIC_3D(0XF) | F_CLEAR_AVMUTE(1); > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, > val); > > + > > + return ret; > > +} > > + > > +static int cdns_hdmi_mode_config(struct cdns_mhdp8501_device *mhdp, > > + struct drm_display_mode *mode, > > + struct video_info *video_info) > > +{ > > + u32 vsync_lines = mode->vsync_end - mode->vsync_start; > > + u32 eof_lines = mode->vsync_start - mode->vdisplay; > > + u32 sof_lines = mode->vtotal - mode->vsync_end; > > + u32 hblank = mode->htotal - mode->hdisplay; > > + u32 hactive = mode->hdisplay; > > + u32 vblank = mode->vtotal - mode->vdisplay; > > + u32 vactive = mode->vdisplay; > > + u32 hfront = mode->hsync_start - mode->hdisplay; > > + u32 hback = mode->htotal - mode->hsync_end; > > + u32 vfront = eof_lines; > > + u32 hsync = hblank - hfront - hback; > > + u32 vsync = vsync_lines; > > + u32 vback = sof_lines; > > + u32 v_h_polarity = ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? > 0 : 1) + > > + ((mode->flags & > DRM_MODE_FLAG_NVSYNC) ? 0 : 2); > > + int ret; > > + u32 val; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, SCHEDULER_H_SIZE, > (hactive << 16) + hblank); > > + if (ret < 0) > > + return ret; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, SCHEDULER_V_SIZE, > (vactive << 16) + vblank); > > + if (ret < 0) > > + return ret; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, > HDTX_SIGNAL_FRONT_WIDTH, (vfront << 16) + hfront); > > + if (ret < 0) > > + return ret; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, > HDTX_SIGNAL_SYNC_WIDTH, (vsync << 16) + hsync); > > + if (ret < 0) > > + return ret; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, > HDTX_SIGNAL_BACK_WIDTH, (vback << 16) + hback); > > + if (ret < 0) > > + return ret; > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, > HSYNC2VSYNC_POL_CTRL, v_h_polarity); > > + if (ret < 0) > > + return ret; > > + > > + /* Reset Data Enable */ > > + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); > > + val &= ~F_DATA_EN(1); > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, > val); > > + if (ret < 0) > > + return ret; > > + > > + /* Set bpc */ > > + val &= ~F_VIF_DATA_WIDTH(3); > > + switch (video_info->bpc) { > > + case 10: > > + val |= F_VIF_DATA_WIDTH(1); > > + break; > > + case 12: > > + val |= F_VIF_DATA_WIDTH(2); > > + break; > > + case 16: > > + val |= F_VIF_DATA_WIDTH(3); > > + break; > > + case 8: > > + default: > > + val |= F_VIF_DATA_WIDTH(0); > > + break; > > + } > > + > > + /* select color encoding */ > > + val &= ~F_HDMI_ENCODING(3); > > + switch (video_info->color_fmt) { > > + case HDMI_COLORSPACE_YUV444: > > + val |= F_HDMI_ENCODING(2); > > + break; > > + case HDMI_COLORSPACE_YUV422: > > + val |= F_HDMI_ENCODING(1); > > + break; > > + case HDMI_COLORSPACE_YUV420: > > + val |= F_HDMI_ENCODING(3); > > + break; > > + case HDMI_COLORSPACE_RGB: > > + default: > > + val |= F_HDMI_ENCODING(0); > > + break; > > + } > > + > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, > val); > > + if (ret < 0) > > + return ret; > > + > > + /* set data enable */ > > + val |= F_DATA_EN(1); > > + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, > val); > > + > > + return ret; > > +} > > + > > +static int cdns_hdmi_disable_gcp(struct cdns_mhdp8501_device *mhdp) > > +{ > > + u32 val; > > + > > + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); > > + val &= ~F_GCP_EN(1); > > + > > + return cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, > val); > > +} > > + > > +static int cdns_hdmi_enable_gcp(struct cdns_mhdp8501_device *mhdp) > > +{ > > + u32 val; > > + > > + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); > > + val |= F_GCP_EN(1); > > + > > + return cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, > val); > > +} > > + > > +static void cdns_hdmi_sink_config(struct cdns_mhdp8501_device *mhdp) > > +{ > > + struct drm_scdc *scdc = > &mhdp->curr_conn->display_info.hdmi.scdc; > > + u8 buff = 0; > > + > > + /* Default work in HDMI1.4 */ > > + mhdp->hdmi.hdmi_type = MODE_HDMI_1_4; > > + > > + /* check sink support SCDC or not */ > > + if (!scdc->supported) { > > + dev_info(mhdp->dev, "Sink Not Support SCDC\n"); > > + return; > > + } > > + > > + if (mhdp->hdmi.char_rate > 340000000) { > > + /* > > + * TMDS Character Rate above 340MHz should working in > HDMI2.0 > > + * Enable scrambling and TMDS_Bit_Clock_Ratio > > + */ > > + buff = SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 | > SCDC_SCRAMBLING_ENABLE; > > + mhdp->hdmi.hdmi_type = MODE_HDMI_2_0; > > + } else if (scdc->scrambling.low_rates) { > > + /* > > + * Enable scrambling and HDMI2.0 when scrambling > capability of sink > > + * be indicated in the HF-VSDB LTE_340Mcsc_scramble > bit > > + */ > > + buff = SCDC_SCRAMBLING_ENABLE; > > + mhdp->hdmi.hdmi_type = MODE_HDMI_2_0; > > + } > > + > > + /* TMDS config */ > > + cdns_hdmi_scdc_write(mhdp, SCDC_TMDS_CONFIG, buff); > > +} > > + > > +static int cdns_hdmi_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags > flags) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { > > + dev_err(mhdp->dev, "do not support creating a > drm_connector\n"); > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static enum drm_mode_status > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + unsigned long long tmds_rate) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + union phy_configure_opts phy_cfg; > > + int ret; > > + > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret < 0) > > + return MODE_CLOCK_RANGE; > > + > > + return MODE_OK; > > +} > > + > > +static enum drm_mode_status > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_info *info, > > + const struct drm_display_mode *mode) > > +{ > > + unsigned long long tmds_rate; > > + > > + /* We don't support double-clocked and Interlaced modes */ > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > + return MODE_BAD; > > + > > + /* MAX support pixel clock rate 594MHz */ > > + if (mode->clock > 594000) > > + return MODE_CLOCK_HIGH; > > + > > + if (mode->hdisplay > 3840) > > + return MODE_BAD_HVALUE; > > + > > + if (mode->vdisplay > 2160) > > + return MODE_BAD_VVALUE; > > + > > + tmds_rate = mode->clock * 1000ULL; > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); > > +} > > + > > +static enum drm_connector_status > > +cdns_hdmi_bridge_detect(struct drm_bridge *bridge) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + return cdns_mhdp8501_detect(mhdp); > > +} > > + > > +static const struct drm_edid > > +*cdns_hdmi_bridge_edid_read(struct drm_bridge *bridge, > > + struct drm_connector *connector) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + return drm_edid_read_custom(connector, > cdns_hdmi_get_edid_block, mhdp); > > +} > > + > > +static void cdns_hdmi_bridge_atomic_disable(struct drm_bridge *bridge, > > + struct drm_bridge_state > *old_state) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + mhdp->curr_conn = NULL; > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + phy_power_off(mhdp->phy); > > + mutex_unlock(&mhdp->mbox_mutex); > > +} > > + > > +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, > > + struct drm_bridge_state > *old_state) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + struct drm_atomic_state *state = old_state->base.state; > > + struct drm_connector *connector; > > + struct video_info *video = &mhdp->video_info; > > + struct drm_crtc_state *crtc_state; > > + struct drm_connector_state *conn_state; > > + struct drm_display_mode *mode = &mhdp->mode; > > + union phy_configure_opts phy_cfg; > > + int ret; > > + > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > + > bridge->encoder); > > + if (WARN_ON(!connector)) > > + return; > > + > > + mhdp->curr_conn = connector; > > + > > + conn_state = drm_atomic_get_new_connector_state(state, > connector); > > + if (WARN_ON(!conn_state)) > > + return; > > + > > + crtc_state = drm_atomic_get_new_crtc_state(state, > conn_state->crtc); > > + if (WARN_ON(!crtc_state)) > > + return; > > + > > + video->color_fmt = conn_state->hdmi.output_format; > > + video->bpc = conn_state->hdmi.output_bpc; > > + > > + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); > > + > > + /* video mode check */ > > + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == > 0) > > + return; > > + > > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > > + mode->hdisplay, mode->vdisplay, mode->clock); > > + > > + drm_atomic_helper_connector_hdmi_update_infoframes(connector, > state); > > + > > + /* Line swapping */ > > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 > | mhdp->lane_mapping); > > + > > + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, > > + > mhdp->video_info.bpc, > > + > mhdp->video_info.color_fmt); > > + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_configure(mhdp->phy, &phy_cfg); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > > + __func__, ret); > > + return; > > + } > > + > > + cdns_hdmi_sink_config(mhdp); > > + > > + ret = cdns_hdmi_ctrl_init(mhdp); > > + if (ret < 0) { > > + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); > > + return; > > + } > > + > > + /* Config GCP */ > > + if (mhdp->video_info.bpc == 8) > > + cdns_hdmi_disable_gcp(mhdp); > > + else > > + cdns_hdmi_enable_gcp(mhdp); > > + > > + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); > > + if (ret < 0) { > > + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking > ret = %d\n", ret); > > + return; > > + } > > +} > > + > > +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge *bridge, > > + enum > hdmi_infoframe_type type) > > +{ > > + return 0; > > +} > > + > > +static int cdns_hdmi_bridge_write_infoframe(struct drm_bridge *bridge, > > + enum > hdmi_infoframe_type type, > > + const u8 *buffer, size_t > len) > > +{ > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + switch (type) { > > + case HDMI_INFOFRAME_TYPE_AVI: > > + cdns_hdmi_config_infoframe(mhdp, 0, len, buffer, > HDMI_INFOFRAME_TYPE_AVI); > > + break; > > + case HDMI_INFOFRAME_TYPE_SPD: > > + cdns_hdmi_config_infoframe(mhdp, 1, len, buffer, > HDMI_INFOFRAME_TYPE_SPD); > > + break; > > + case HDMI_INFOFRAME_TYPE_VENDOR: > > + cdns_hdmi_config_infoframe(mhdp, 2, len, buffer, > HDMI_INFOFRAME_TYPE_VENDOR); > > + break; > > + default: > > + dev_dbg(mhdp->dev, "Unsupported infoframe type %x\n", > type); > > + } > > + > > + return 0; > > +} > > + > > +static int cdns_hdmi_bridge_atomic_check(struct drm_bridge *bridge, > > + struct drm_bridge_state > *bridge_state, > > + struct drm_crtc_state > *crtc_state, > > + struct drm_connector_state > *conn_state) > > +{ > > + return > drm_atomic_helper_connector_hdmi_check(conn_state->connector, > conn_state->state); > > +} > > + > > +const struct drm_bridge_funcs cdns_hdmi_bridge_funcs = { > > + .attach = cdns_hdmi_bridge_attach, > > + .detect = cdns_hdmi_bridge_detect, > > + .edid_read = cdns_hdmi_bridge_edid_read, > > + .mode_valid = cdns_hdmi_bridge_mode_valid, > > + .atomic_enable = cdns_hdmi_bridge_atomic_enable, > > + .atomic_disable = cdns_hdmi_bridge_atomic_disable, > > + .atomic_check = cdns_hdmi_bridge_atomic_check, > > + .atomic_duplicate_state = > drm_atomic_helper_bridge_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > > + .atomic_reset = drm_atomic_helper_bridge_reset, > > + .hdmi_clear_infoframe = cdns_hdmi_bridge_clear_infoframe, > > + .hdmi_write_infoframe = cdns_hdmi_bridge_write_infoframe, > > + .hdmi_tmds_char_rate_valid = cdns_hdmi_tmds_char_rate_valid, > > +};
Hi Maxime, Thanks for your comments, > -----Original Message----- > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf Of > Maxime Ripard > Sent: 2024年7月2日 21:25 > To: Sandor Yu <sandor.yu@nxp.com> > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > neil.armstrong@linaro.org; Laurent Pinchart > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > shawnguo@kernel.org; s.hauer@pengutronix.de; festevam@gmail.com; > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver Brown > <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > sam@ravnborg.org > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 > DP/HDMI driver > > Hi, > > There's still the scrambler issue we discussed on v15, but I have some more > comments. > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > +cdns_mhdp8501_device *mhdp) { > > + u8 hpd = 0xf; > > + > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > + if (hpd == 1) > > + return connector_status_connected; > > + else if (hpd == 0) > > + return connector_status_disconnected; > > + > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > > + return connector_status_unknown; > > +} > > + > > +static void hotplug_work_func(struct work_struct *work) { > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > + struct cdns_mhdp8501_device, > > + hotplug_work.work); > > + enum drm_connector_status status = cdns_mhdp8501_detect(mhdp); > > + > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > + > > + if (status == connector_status_connected) { > > + /* Cable connected */ > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > + enable_irq(mhdp->irq[IRQ_OUT]); > > + } else if (status == connector_status_disconnected) { > > + /* Cable Disconnected */ > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > + enable_irq(mhdp->irq[IRQ_IN]); > > + } > > +} > > You shouldn't play with the interrupt being enabled here: hotplug interrupts > should always enabled. > > If you can't for some reason, the reason should be documented in your driver. iMX8MQ have two HPD interrupters, one for plugout and the other for plugin, because they could not be masked, so we have to enable one and disable the other. I will add more comments here. > > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_init(mhdp->phy); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > + goto clk_disable; > > + } > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > + goto clk_disable; > > + } > > Why do you need a shared mutex between the phy and HDMI controller? Both PHY and HDMI controller could access to the HDMI firmware by mailbox, So add mutex to avoid race condition. > > > +static enum drm_mode_status > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + unsigned long long tmds_rate) { > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + union phy_configure_opts phy_cfg; > > + int ret; > > + > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > + > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret < 0) > > + return MODE_CLOCK_RANGE; > > + > > + return MODE_OK; > > +} > > + > > +static enum drm_mode_status > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_info *info, > > + const struct drm_display_mode *mode) { > > + unsigned long long tmds_rate; > > + > > + /* We don't support double-clocked and Interlaced modes */ > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > + return MODE_BAD; > > + > > + /* MAX support pixel clock rate 594MHz */ > > + if (mode->clock > 594000) > > + return MODE_CLOCK_HIGH; > > This needs to be in the tmds_char_rate_valid function This clock rate check is covered by function tmds_char_rate_valid() It could be removed if keep function tmds_char_rate_valid() be called by mode_valid. > > > + if (mode->hdisplay > 3840) > > + return MODE_BAD_HVALUE; > > + > > + if (mode->vdisplay > 2160) > > + return MODE_BAD_VVALUE; > > + > > + tmds_rate = mode->clock * 1000ULL; > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); > > It will already be called by the core so this is redundant. mode_valid function is use to filter the mode list in drm_helper_probe_single_connector_modes(), if function cdns_hdmi_tmds_char_rate_valid() is not called, unsupported modes will in mode list. > > > +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, > > + struct drm_bridge_state *old_state) { > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + struct drm_atomic_state *state = old_state->base.state; > > + struct drm_connector *connector; > > + struct video_info *video = &mhdp->video_info; > > + struct drm_crtc_state *crtc_state; > > + struct drm_connector_state *conn_state; > > + struct drm_display_mode *mode = &mhdp->mode; > > + union phy_configure_opts phy_cfg; > > + int ret; > > + > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > + bridge->encoder); > > + if (WARN_ON(!connector)) > > + return; > > + > > + mhdp->curr_conn = connector; > > + > > + conn_state = drm_atomic_get_new_connector_state(state, connector); > > + if (WARN_ON(!conn_state)) > > + return; > > + > > + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); > > + if (WARN_ON(!crtc_state)) > > + return; > > + > > + video->color_fmt = conn_state->hdmi.output_format; > > + video->bpc = conn_state->hdmi.output_bpc; > > + > > + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); > > Why do you need a copy of all these fields? You should pass the connector / > bridge state around and not copy these fields. > OK, mode will be removed, and it will replace by drm_connector_state. > > + /* video mode check */ > > + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == 0) > > + return; > > This should be checked in atomic_check, but I'm pretty sure it's redundant. OK, It will be removed. > > > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > > + mode->hdisplay, mode->vdisplay, mode->clock); > > + > > + drm_atomic_helper_connector_hdmi_update_infoframes(connector, > > +state); > > + > > + /* Line swapping */ > > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | > > +mhdp->lane_mapping); > > + > > + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, > > + mhdp->video_info.bpc, > > + mhdp->video_info.color_fmt); > > The TMDS char rate is already available in the connector_state so there no > need to recompute it. > > > + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; > > And you shouldn't store a copy either. OK, variable char_rate will be removed and will use the drm_connector_state-> hdmi.tmds_char_rate > > > + /* Mailbox protect for HDMI PHY access */ > > + mutex_lock(&mhdp->mbox_mutex); > > + ret = phy_configure(mhdp->phy, &phy_cfg); > > + mutex_unlock(&mhdp->mbox_mutex); > > + if (ret) { > > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > > + __func__, ret); > > + return; > > + } > > + > > + cdns_hdmi_sink_config(mhdp); > > + > > + ret = cdns_hdmi_ctrl_init(mhdp); > > + if (ret < 0) { > > + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); > > + return; > > + } > > + > > + /* Config GCP */ > > + if (mhdp->video_info.bpc == 8) > > + cdns_hdmi_disable_gcp(mhdp); > > + else > > + cdns_hdmi_enable_gcp(mhdp); > > + > > + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); > > + if (ret < 0) { > > + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking ret > = %d\n", ret); > > + return; > > + } > > +} > > + > > +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge *bridge, > > + enum hdmi_infoframe_type type) { > > + return 0; > > +} > > Either implement it or don't, but an empty function is dead code. Must have function hdmi_clear_infoframe when set DRM_BRIDGE_OP_HDMI flag in &drm_bridge->ops, otherwise the drm_bridge_connector_init() will fail. https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/drm_bridge_connector.c?h=next-20240902#n419 > > > +static int cdns_hdmi_bridge_write_infoframe(struct drm_bridge *bridge, > > + enum hdmi_infoframe_type type, > > + const u8 *buffer, size_t len) { > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > + > > + switch (type) { > > + case HDMI_INFOFRAME_TYPE_AVI: > > + cdns_hdmi_config_infoframe(mhdp, 0, len, buffer, > HDMI_INFOFRAME_TYPE_AVI); > > + break; > > + case HDMI_INFOFRAME_TYPE_SPD: > > + cdns_hdmi_config_infoframe(mhdp, 1, len, buffer, > HDMI_INFOFRAME_TYPE_SPD); > > + break; > > + case HDMI_INFOFRAME_TYPE_VENDOR: > > + cdns_hdmi_config_infoframe(mhdp, 2, len, buffer, > HDMI_INFOFRAME_TYPE_VENDOR); > > + break; > > + default: > > + dev_dbg(mhdp->dev, "Unsupported infoframe type %x\n", type); > > + } > > + > > + return 0; > > +} > > + > > +static int cdns_hdmi_bridge_atomic_check(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state) { > > + return > drm_atomic_helper_connector_hdmi_check(conn_state->connector, > > +conn_state->state); } > > You should also call your mode_valid function here. Function cdns_hdmi_tmds_char_rate_valid() is called in atomic_check(). Function cdns_hdmi_bridge_mode_valid is called by core, should not be called again. Sandor > > Maxime
On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > Hi Maxime, > > Thanks for your comments, > > > -----Original Message----- > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf Of > > Maxime Ripard > > Sent: 2024年7月2日 21:25 > > To: Sandor Yu <sandor.yu@nxp.com> > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > neil.armstrong@linaro.org; Laurent Pinchart > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > shawnguo@kernel.org; s.hauer@pengutronix.de; festevam@gmail.com; > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver Brown > > <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > > sam@ravnborg.org > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 > > DP/HDMI driver > > > > Hi, > > > > There's still the scrambler issue we discussed on v15, but I have some more > > comments. > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > +cdns_mhdp8501_device *mhdp) { > > > + u8 hpd = 0xf; > > > + > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > + if (hpd == 1) > > > + return connector_status_connected; > > > + else if (hpd == 0) > > > + return connector_status_disconnected; > > > + > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > > > + return connector_status_unknown; > > > +} > > > + > > > +static void hotplug_work_func(struct work_struct *work) { > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > + struct cdns_mhdp8501_device, > > > + hotplug_work.work); > > > + enum drm_connector_status status = cdns_mhdp8501_detect(mhdp); > > > + > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > + > > > + if (status == connector_status_connected) { > > > + /* Cable connected */ > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > + } else if (status == connector_status_disconnected) { > > > + /* Cable Disconnected */ > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > + } > > > +} > > > > You shouldn't play with the interrupt being enabled here: hotplug interrupts > > should always enabled. > > > > If you can't for some reason, the reason should be documented in your driver. > > iMX8MQ have two HPD interrupters, one for plugout and the other for plugin, > because they could not be masked, so we have to enable one and disable the other. > I will add more comments here. Right, but why do you need to enable and disable them? Do you get spurious interrupts? > > > > > + /* Mailbox protect for HDMI PHY access */ > > > + mutex_lock(&mhdp->mbox_mutex); > > > + ret = phy_init(mhdp->phy); > > > + mutex_unlock(&mhdp->mbox_mutex); > > > + if (ret) { > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > + goto clk_disable; > > > + } > > > + > > > + /* Mailbox protect for HDMI PHY access */ > > > + mutex_lock(&mhdp->mbox_mutex); > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > + mutex_unlock(&mhdp->mbox_mutex); > > > + if (ret) { > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > + goto clk_disable; > > > + } > > > > Why do you need a shared mutex between the phy and HDMI controller? > > Both PHY and HDMI controller could access to the HDMI firmware by mailbox, > So add mutex to avoid race condition. That should be handled at either the phy or mailbox level, not in your hdmi driver. > > > > > +static enum drm_mode_status > > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > > + const struct drm_display_mode *mode, > > > + unsigned long long tmds_rate) { > > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > > + union phy_configure_opts phy_cfg; > > > + int ret; > > > + > > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > > + > > > + /* Mailbox protect for HDMI PHY access */ > > > + mutex_lock(&mhdp->mbox_mutex); > > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > > > + mutex_unlock(&mhdp->mbox_mutex); > > > + if (ret < 0) > > > + return MODE_CLOCK_RANGE; > > > + > > > + return MODE_OK; > > > +} > > > + > > > +static enum drm_mode_status > > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > > + const struct drm_display_info *info, > > > + const struct drm_display_mode *mode) { > > > + unsigned long long tmds_rate; > > > + > > > + /* We don't support double-clocked and Interlaced modes */ > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > > + return MODE_BAD; > > > + > > > + /* MAX support pixel clock rate 594MHz */ > > > + if (mode->clock > 594000) > > > + return MODE_CLOCK_HIGH; > > > > This needs to be in the tmds_char_rate_valid function > This clock rate check is covered by function tmds_char_rate_valid() > It could be removed if keep function tmds_char_rate_valid() be called by mode_valid. Yeah, it's not something you should have to duplicate. > > > > > + if (mode->hdisplay > 3840) > > > + return MODE_BAD_HVALUE; > > > + > > > + if (mode->vdisplay > 2160) > > > + return MODE_BAD_VVALUE; > > > + > > > + tmds_rate = mode->clock * 1000ULL; > > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); > > > > It will already be called by the core so this is redundant. > > mode_valid function is use to filter the mode list in drm_helper_probe_single_connector_modes(), > if function cdns_hdmi_tmds_char_rate_valid() is not called, unsupported modes will in mode list. It's probably something we should deal with in the core somehow. I'm not entirely sure how to reconcile drm_bridge_connector and the hdmi framework there, but we should at the very least provide a mode_valid helper for bridges. > > > > > +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, > > > + struct drm_bridge_state *old_state) { > > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > > + struct drm_atomic_state *state = old_state->base.state; > > > + struct drm_connector *connector; > > > + struct video_info *video = &mhdp->video_info; > > > + struct drm_crtc_state *crtc_state; > > > + struct drm_connector_state *conn_state; > > > + struct drm_display_mode *mode = &mhdp->mode; > > > + union phy_configure_opts phy_cfg; > > > + int ret; > > > + > > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > > + bridge->encoder); > > > + if (WARN_ON(!connector)) > > > + return; > > > + > > > + mhdp->curr_conn = connector; > > > + > > > + conn_state = drm_atomic_get_new_connector_state(state, connector); > > > + if (WARN_ON(!conn_state)) > > > + return; > > > + > > > + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); > > > + if (WARN_ON(!crtc_state)) > > > + return; > > > + > > > + video->color_fmt = conn_state->hdmi.output_format; > > > + video->bpc = conn_state->hdmi.output_bpc; > > > + > > > + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); > > > > Why do you need a copy of all these fields? You should pass the connector / > > bridge state around and not copy these fields. > > > OK, mode will be removed, and it will replace by drm_connector_state. > > > > + /* video mode check */ > > > + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == 0) > > > + return; > > > > This should be checked in atomic_check, but I'm pretty sure it's redundant. > OK, It will be removed. > > > > > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > > > + mode->hdisplay, mode->vdisplay, mode->clock); > > > + > > > + drm_atomic_helper_connector_hdmi_update_infoframes(connector, > > > +state); > > > + > > > + /* Line swapping */ > > > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | > > > +mhdp->lane_mapping); > > > + > > > + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, > > > + mhdp->video_info.bpc, > > > + mhdp->video_info.color_fmt); > > > > The TMDS char rate is already available in the connector_state so there no > > need to recompute it. > > > > > + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; > > > > And you shouldn't store a copy either. > OK, variable char_rate will be removed and will use the drm_connector_state-> hdmi.tmds_char_rate > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > + mutex_lock(&mhdp->mbox_mutex); > > > + ret = phy_configure(mhdp->phy, &phy_cfg); > > > + mutex_unlock(&mhdp->mbox_mutex); > > > + if (ret) { > > > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > > > + __func__, ret); > > > + return; > > > + } > > > + > > > + cdns_hdmi_sink_config(mhdp); > > > + > > > + ret = cdns_hdmi_ctrl_init(mhdp); > > > + if (ret < 0) { > > > + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); > > > + return; > > > + } > > > + > > > + /* Config GCP */ > > > + if (mhdp->video_info.bpc == 8) > > > + cdns_hdmi_disable_gcp(mhdp); > > > + else > > > + cdns_hdmi_enable_gcp(mhdp); > > > + > > > + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); > > > + if (ret < 0) { > > > + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking ret > > = %d\n", ret); > > > + return; > > > + } > > > +} > > > + > > > +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge *bridge, > > > + enum hdmi_infoframe_type type) { > > > + return 0; > > > +} > > > > Either implement it or don't, but an empty function is dead code. > Must have function hdmi_clear_infoframe when set DRM_BRIDGE_OP_HDMI flag in &drm_bridge->ops, > otherwise the drm_bridge_connector_init() will fail. > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/drm_bridge_connector.c?h=next-20240902#n419 That's a strong hint that you should implement it, not workaround it :) Maxime
> > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > Hi Maxime, > > > > Thanks for your comments, > > > > > -----Original Message----- > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf > > > Of Maxime Ripard > > > Sent: 2024年7月2日 21:25 > > > To: Sandor Yu <sandor.yu@nxp.com> > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > neil.armstrong@linaro.org; Laurent Pinchart > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > shawnguo@kernel.org; s.hauer@pengutronix.de; festevam@gmail.com; > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver > > > Brown <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > > > sam@ravnborg.org > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > MHDP8501 DP/HDMI driver > > > > > > Hi, > > > > > > There's still the scrambler issue we discussed on v15, but I have > > > some more comments. > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > +cdns_mhdp8501_device *mhdp) { > > > > + u8 hpd = 0xf; > > > > + > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > + if (hpd == 1) > > > > + return connector_status_connected; > > > > + else if (hpd == 0) > > > > + return connector_status_disconnected; > > > > + > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > > > > + return connector_status_unknown; } > > > > + > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > + struct cdns_mhdp8501_device, > > > > + hotplug_work.work); > > > > + enum drm_connector_status status = > cdns_mhdp8501_detect(mhdp); > > > > + > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > + > > > > + if (status == connector_status_connected) { > > > > + /* Cable connected */ > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > + } else if (status == connector_status_disconnected) { > > > > + /* Cable Disconnected */ > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > + } > > > > +} > > > > > > You shouldn't play with the interrupt being enabled here: hotplug > > > interrupts should always enabled. > > > > > > If you can't for some reason, the reason should be documented in your > driver. > > > > iMX8MQ have two HPD interrupters, one for plugout and the other for > > plugin, because they could not be masked, so we have to enable one and > disable the other. > > I will add more comments here. > > Right, but why do you need to enable and disable them? Do you get spurious > interrupts? They don't have status registers and cannot be masked. If they are not disabled, they will continuously generate interrupts. Therefore, I have to disable one and enable the other. > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > + ret = phy_init(mhdp->phy); > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > + if (ret) { > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > + goto clk_disable; > > > > + } > > > > + > > > > + /* Mailbox protect for HDMI PHY access */ > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > + if (ret) { > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > + goto clk_disable; > > > > + } > > > > > > Why do you need a shared mutex between the phy and HDMI controller? > > > > Both PHY and HDMI controller could access to the HDMI firmware by > > mailbox, So add mutex to avoid race condition. > > That should be handled at either the phy or mailbox level, not in your hdmi > driver. > In both HDMI driver and PHY driver, every mailbox access had protected by its owns mutex. However, this mutex can only protect each mailbox access within their respective drivers, and it cannot provide protection for access between the HDMI and PHY drivers. The PHY driver only provides two API functions, and these functions are only called in the HDMI driver. Therefore, when accessing these functions, we use a mutex to protect them. This ensures that mailbox access is protected across different PHY and HDMI drivers. > > > > > > > +static enum drm_mode_status > > > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > > > + const struct drm_display_mode *mode, > > > > + unsigned long long tmds_rate) { > > > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > > > + union phy_configure_opts phy_cfg; > > > > + int ret; > > > > + > > > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > > > + > > > > + /* Mailbox protect for HDMI PHY access */ > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > + if (ret < 0) > > > > + return MODE_CLOCK_RANGE; > > > > + > > > > + return MODE_OK; > > > > +} > > > > + > > > > +static enum drm_mode_status > > > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > > > + const struct drm_display_info *info, > > > > + const struct drm_display_mode *mode) { > > > > + unsigned long long tmds_rate; > > > > + > > > > + /* We don't support double-clocked and Interlaced modes */ > > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > > > + return MODE_BAD; > > > > + > > > > + /* MAX support pixel clock rate 594MHz */ > > > > + if (mode->clock > 594000) > > > > + return MODE_CLOCK_HIGH; > > > > > > This needs to be in the tmds_char_rate_valid function > > This clock rate check is covered by function tmds_char_rate_valid() It > > could be removed if keep function tmds_char_rate_valid() be called by > mode_valid. > > Yeah, it's not something you should have to duplicate. > > > > > > > > + if (mode->hdisplay > 3840) > > > > + return MODE_BAD_HVALUE; > > > > + > > > > + if (mode->vdisplay > 2160) > > > > + return MODE_BAD_VVALUE; > > > > + > > > > + tmds_rate = mode->clock * 1000ULL; > > > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); > > > > > > It will already be called by the core so this is redundant. > > > > mode_valid function is use to filter the mode list in > > drm_helper_probe_single_connector_modes(), > > if function cdns_hdmi_tmds_char_rate_valid() is not called, unsupported > modes will in mode list. > > It's probably something we should deal with in the core somehow. I'm not > entirely sure how to reconcile drm_bridge_connector and the hdmi > framework there, but we should at the very least provide a mode_valid > helper for bridges. > I agree with that. In fact, I'm a bit confused about the current mode_valid and tmds_char_rate_valid functions. Ideally, we should find a way to make tmds_char_rate_valid also work for filtering out the mode list, rather than just during atomic_check. > > > > > > > +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge > *bridge, > > > > + struct drm_bridge_state *old_state) { > > > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > > > + struct drm_atomic_state *state = old_state->base.state; > > > > + struct drm_connector *connector; > > > > + struct video_info *video = &mhdp->video_info; > > > > + struct drm_crtc_state *crtc_state; > > > > + struct drm_connector_state *conn_state; > > > > + struct drm_display_mode *mode = &mhdp->mode; > > > > + union phy_configure_opts phy_cfg; > > > > + int ret; > > > > + > > > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > > > + bridge->encoder); > > > > + if (WARN_ON(!connector)) > > > > + return; > > > > + > > > > + mhdp->curr_conn = connector; > > > > + > > > > + conn_state = drm_atomic_get_new_connector_state(state, > connector); > > > > + if (WARN_ON(!conn_state)) > > > > + return; > > > > + > > > > + crtc_state = drm_atomic_get_new_crtc_state(state, > conn_state->crtc); > > > > + if (WARN_ON(!crtc_state)) > > > > + return; > > > > + > > > > + video->color_fmt = conn_state->hdmi.output_format; > > > > + video->bpc = conn_state->hdmi.output_bpc; > > > > + > > > > + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); > > > > > > Why do you need a copy of all these fields? You should pass the > > > connector / bridge state around and not copy these fields. > > > > > OK, mode will be removed, and it will replace by drm_connector_state. > > > > > > + /* video mode check */ > > > > + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == > 0) > > > > + return; > > > > > > This should be checked in atomic_check, but I'm pretty sure it's > redundant. > > OK, It will be removed. > > > > > > > + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", > > > > + mode->hdisplay, mode->vdisplay, mode->clock); > > > > + > > > > + > drm_atomic_helper_connector_hdmi_update_infoframes(connector, > > > > +state); > > > > + > > > > + /* Line swapping */ > > > > + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 > | > > > > +mhdp->lane_mapping); > > > > + > > > > + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, > > > > + mhdp->video_info.bpc, > > > > + mhdp->video_info.color_fmt); > > > > > > The TMDS char rate is already available in the connector_state so > > > there no need to recompute it. > > > > > > > + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; > > > > > > And you shouldn't store a copy either. > > OK, variable char_rate will be removed and will use the > > drm_connector_state-> hdmi.tmds_char_rate > > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > + ret = phy_configure(mhdp->phy, &phy_cfg); > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > + if (ret) { > > > > + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", > > > > + __func__, ret); > > > > + return; > > > > + } > > > > + > > > > + cdns_hdmi_sink_config(mhdp); > > > > + > > > > + ret = cdns_hdmi_ctrl_init(mhdp); > > > > + if (ret < 0) { > > > > + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); > > > > + return; > > > > + } > > > > + > > > > + /* Config GCP */ > > > > + if (mhdp->video_info.bpc == 8) > > > > + cdns_hdmi_disable_gcp(mhdp); > > > > + else > > > > + cdns_hdmi_enable_gcp(mhdp); > > > > + > > > > + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); > > > > + if (ret < 0) { > > > > + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking ret > > > = %d\n", ret); > > > > + return; > > > > + } > > > > +} > > > > + > > > > +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge > *bridge, > > > > + enum hdmi_infoframe_type type) { > > > > + return 0; > > > > +} > > > > > > Either implement it or don't, but an empty function is dead code. > > Must have function hdmi_clear_infoframe when set > DRM_BRIDGE_OP_HDMI > > flag in &drm_bridge->ops, otherwise the drm_bridge_connector_init() will > fail. > > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tr > > ee/drivers/gpu/drm/drm_bridge_connector.c?h=next-20240902#n419 > > That's a strong hint that you should implement it, not workaround it :) OK, I will add it. Sandor > > Maxime
On Fri, Sep 06, 2024 at 02:50:08AM GMT, Sandor Yu wrote: > > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > > > -----Original Message----- > > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf > > > > Of Maxime Ripard > > > > Sent: 2024年7月2日 21:25 > > > > To: Sandor Yu <sandor.yu@nxp.com> > > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > > neil.armstrong@linaro.org; Laurent Pinchart > > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > > shawnguo@kernel.org; s.hauer@pengutronix.de; festevam@gmail.com; > > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver > > > > Brown <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > > > > sam@ravnborg.org > > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > MHDP8501 DP/HDMI driver > > > > > > > > Hi, > > > > > > > > There's still the scrambler issue we discussed on v15, but I have > > > > some more comments. > > > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > > +cdns_mhdp8501_device *mhdp) { > > > > > + u8 hpd = 0xf; > > > > > + > > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > > + if (hpd == 1) > > > > > + return connector_status_connected; > > > > > + else if (hpd == 0) > > > > > + return connector_status_disconnected; > > > > > + > > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); > > > > > + return connector_status_unknown; } > > > > > + > > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > > + struct cdns_mhdp8501_device, > > > > > + hotplug_work.work); > > > > > + enum drm_connector_status status = > > cdns_mhdp8501_detect(mhdp); > > > > > + > > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > > + > > > > > + if (status == connector_status_connected) { > > > > > + /* Cable connected */ > > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > > + } else if (status == connector_status_disconnected) { > > > > > + /* Cable Disconnected */ > > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > > + } > > > > > +} > > > > > > > > You shouldn't play with the interrupt being enabled here: hotplug > > > > interrupts should always enabled. > > > > > > > > If you can't for some reason, the reason should be documented in your > > driver. > > > > > > iMX8MQ have two HPD interrupters, one for plugout and the other for > > > plugin, because they could not be masked, so we have to enable one and > > disable the other. > > > I will add more comments here. > > > > Right, but why do you need to enable and disable them? Do you get spurious > > interrupts? > > They don't have status registers and cannot be masked. If they are not disabled, > they will continuously generate interrupts. Therefore, I have to disable one and enable the other. Sorry, I still don't get it. How can it be useful to detect hotplug interrupts if it constantly sends spurious interrupts when it's enabled? > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > + ret = phy_init(mhdp->phy); > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > + if (ret) { > > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > > + goto clk_disable; > > > > > + } > > > > > + > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > + if (ret) { > > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > > + goto clk_disable; > > > > > + } > > > > > > > > Why do you need a shared mutex between the phy and HDMI controller? > > > > > > Both PHY and HDMI controller could access to the HDMI firmware by > > > mailbox, So add mutex to avoid race condition. > > > > That should be handled at either the phy or mailbox level, not in your hdmi > > driver. > > In both HDMI driver and PHY driver, every mailbox access had protected > by its owns mutex. However, this mutex can only protect each mailbox > access within their respective drivers, and it cannot provide > protection for access between the HDMI and PHY drivers. > > The PHY driver only provides two API functions, and these functions > are only called in the HDMI driver. Therefore, when accessing these > functions, we use a mutex to protect them. This ensures that mailbox > access is protected across different PHY and HDMI drivers. It's really about abstraction. You're using a publicly defined API, and change the semantics for your driver only, and that's not ok. Why can't the mailbox driver itself serialize the accesses from any user, HDMI and PHY drivers included? > > > > > > > > > +static enum drm_mode_status > > > > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > > > > + const struct drm_display_mode *mode, > > > > > + unsigned long long tmds_rate) { > > > > > + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; > > > > > + union phy_configure_opts phy_cfg; > > > > > + int ret; > > > > > + > > > > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > > > > + > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > + if (ret < 0) > > > > > + return MODE_CLOCK_RANGE; > > > > > + > > > > > + return MODE_OK; > > > > > +} > > > > > + > > > > > +static enum drm_mode_status > > > > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > > > > + const struct drm_display_info *info, > > > > > + const struct drm_display_mode *mode) { > > > > > + unsigned long long tmds_rate; > > > > > + > > > > > + /* We don't support double-clocked and Interlaced modes */ > > > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > > > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > > > > + return MODE_BAD; > > > > > + > > > > > + /* MAX support pixel clock rate 594MHz */ > > > > > + if (mode->clock > 594000) > > > > > + return MODE_CLOCK_HIGH; > > > > > > > > This needs to be in the tmds_char_rate_valid function > > > This clock rate check is covered by function tmds_char_rate_valid() It > > > could be removed if keep function tmds_char_rate_valid() be called by > > mode_valid. > > > > Yeah, it's not something you should have to duplicate. > > > > > > > > > > > + if (mode->hdisplay > 3840) > > > > > + return MODE_BAD_HVALUE; > > > > > + > > > > > + if (mode->vdisplay > 2160) > > > > > + return MODE_BAD_VVALUE; > > > > > + > > > > > + tmds_rate = mode->clock * 1000ULL; > > > > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); > > > > > > > > It will already be called by the core so this is redundant. > > > > > > mode_valid function is use to filter the mode list in > > > drm_helper_probe_single_connector_modes(), > > > if function cdns_hdmi_tmds_char_rate_valid() is not called, unsupported > > modes will in mode list. > > > > It's probably something we should deal with in the core somehow. I'm not > > entirely sure how to reconcile drm_bridge_connector and the hdmi > > framework there, but we should at the very least provide a mode_valid > > helper for bridges. > > I agree with that. In fact, I'm a bit confused about the current > mode_valid and tmds_char_rate_valid functions. Ideally, we should find > a way to make tmds_char_rate_valid also work for filtering out the > mode list, rather than just during atomic_check. Yeah, definitely. The way we did so on vc4 for example was to compute the rate for a 8bpc, RGB, output and try to validate that. I think it would be reasonable to start with that. Maxime
> Subject: Re: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 > DP/HDMI driver > > On Fri, Sep 06, 2024 at 02:50:08AM GMT, Sandor Yu wrote: > > > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > > > > -----Original Message----- > > > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On > > > > > Behalf Of Maxime Ripard > > > > > Sent: 2024年7月2日 21:25 > > > > > To: Sandor Yu <sandor.yu@nxp.com> > > > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > > > neil.armstrong@linaro.org; Laurent Pinchart > > > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > > > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > > > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > > > shawnguo@kernel.org; s.hauer@pengutronix.de; > festevam@gmail.com; > > > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > > > devicetree@vger.kernel.org; > > > > > linux-arm-kernel@lists.infradead.org; > > > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver > > > > > Brown <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > > > > > sam@ravnborg.org > > > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > > MHDP8501 DP/HDMI driver > > > > > > > > > > Hi, > > > > > > > > > > There's still the scrambler issue we discussed on v15, but I > > > > > have some more comments. > > > > > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > > > +cdns_mhdp8501_device *mhdp) { > > > > > > + u8 hpd = 0xf; > > > > > > + > > > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > > > + if (hpd == 1) > > > > > > + return connector_status_connected; > > > > > > + else if (hpd == 0) > > > > > > + return connector_status_disconnected; > > > > > > + > > > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", > hpd); > > > > > > + return connector_status_unknown; } > > > > > > + > > > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > > > + struct cdns_mhdp8501_device, > > > > > > + hotplug_work.work); > > > > > > + enum drm_connector_status status = > > > cdns_mhdp8501_detect(mhdp); > > > > > > + > > > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > > > + > > > > > > + if (status == connector_status_connected) { > > > > > > + /* Cable connected */ > > > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > > > + } else if (status == connector_status_disconnected) { > > > > > > + /* Cable Disconnected */ > > > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > > > + } > > > > > > +} > > > > > > > > > > You shouldn't play with the interrupt being enabled here: > > > > > hotplug interrupts should always enabled. > > > > > > > > > > If you can't for some reason, the reason should be documented in > > > > > your > > > driver. > > > > > > > > iMX8MQ have two HPD interrupters, one for plugout and the other > > > > for plugin, because they could not be masked, so we have to enable > > > > one and > > > disable the other. > > > > I will add more comments here. > > > > > > Right, but why do you need to enable and disable them? Do you get > > > spurious interrupts? > > > > They don't have status registers and cannot be masked. If they are not > > disabled, they will continuously generate interrupts. Therefore, I have to > disable one and enable the other. > > Sorry, I still don't get it. How can it be useful to detect hotplug interrupts if it > constantly sends spurious interrupts when it's enabled? Yes, this interrupt is different from a normal one; it's likely a design flaw. For instance, the plugin interrupt is continuously generated as long as the cable is plugged in, only stopping when the cable is unplugged. That's why two interrupts are used to detect cable plugout and plugin separately. If interrupts aren't used, the only option is polling. > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > + ret = phy_init(mhdp->phy); > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > + if (ret) { > > > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > > > + goto clk_disable; > > > > > > + } > > > > > > + > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > + if (ret) { > > > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > > > + goto clk_disable; > > > > > > + } > > > > > > > > > > Why do you need a shared mutex between the phy and HDMI > controller? > > > > > > > > Both PHY and HDMI controller could access to the HDMI firmware by > > > > mailbox, So add mutex to avoid race condition. > > > > > > That should be handled at either the phy or mailbox level, not in > > > your hdmi driver. > > > > In both HDMI driver and PHY driver, every mailbox access had protected > > by its owns mutex. However, this mutex can only protect each mailbox > > access within their respective drivers, and it cannot provide > > protection for access between the HDMI and PHY drivers. > > > > The PHY driver only provides two API functions, and these functions > > are only called in the HDMI driver. Therefore, when accessing these > > functions, we use a mutex to protect them. This ensures that mailbox > > access is protected across different PHY and HDMI drivers. > > It's really about abstraction. You're using a publicly defined API, and change > the semantics for your driver only, and that's not ok. > > Why can't the mailbox driver itself serialize the accesses from any user, HDMI > and PHY drivers included? > In the current code implementation, cdns-mhdp-helper.c isn't a standalone driver but rather a library. It provides fundamental mailbox access functions and basic register read/write operations that rely on the mailbox. These functions are highly reusable across MHDP8501 and MHDP8546 and can be leveraged by future MHDP versions. However, most MHDP firmware interactions involve a sequence of mailbox accesses, including sending commands and receiving firmware responses. These commands constitute a significant portion of all firmware interactions, encompassing operations like EDID reading and DP link training. Unfortunately, these commands cannot be reused between MHDP8501 and MHDP8546. Creating a dedicated mailbox driver with its own mutex would effectively address race conditions. However, this would necessitate relocating all mailbox-related functions to this driver. Including these non-reusable functions would defeat the purpose of code reuse. To strike a balance between code reusability and race condition mitigation, adding mutexes to PHY access functions seems like a reasonable solution. Sandor > > > > > > > > > > > +static enum drm_mode_status > > > > > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > > > > > + const struct drm_display_mode *mode, > > > > > > + unsigned long long tmds_rate) { > > > > > > + struct cdns_mhdp8501_device *mhdp = > bridge->driver_private; > > > > > > + union phy_configure_opts phy_cfg; > > > > > > + int ret; > > > > > > + > > > > > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > > > > > + > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, > &phy_cfg); > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > + if (ret < 0) > > > > > > + return MODE_CLOCK_RANGE; > > > > > > + > > > > > > + return MODE_OK; > > > > > > +} > > > > > > + > > > > > > +static enum drm_mode_status > > > > > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > > > > > + const struct drm_display_info *info, > > > > > > + const struct drm_display_mode *mode) { > > > > > > + unsigned long long tmds_rate; > > > > > > + > > > > > > + /* We don't support double-clocked and Interlaced modes */ > > > > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > > > > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > > > > > + return MODE_BAD; > > > > > > + > > > > > > + /* MAX support pixel clock rate 594MHz */ > > > > > > + if (mode->clock > 594000) > > > > > > + return MODE_CLOCK_HIGH; > > > > > > > > > > This needs to be in the tmds_char_rate_valid function > > > > This clock rate check is covered by function > > > > tmds_char_rate_valid() It could be removed if keep function > > > > tmds_char_rate_valid() be called by > > > mode_valid. > > > > > > Yeah, it's not something you should have to duplicate. > > > > > > > > > > > > > > + if (mode->hdisplay > 3840) > > > > > > + return MODE_BAD_HVALUE; > > > > > > + > > > > > > + if (mode->vdisplay > 2160) > > > > > > + return MODE_BAD_VVALUE; > > > > > > + > > > > > > + tmds_rate = mode->clock * 1000ULL; > > > > > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, > > > > > > +tmds_rate); > > > > > > > > > > It will already be called by the core so this is redundant. > > > > > > > > mode_valid function is use to filter the mode list in > > > > drm_helper_probe_single_connector_modes(), > > > > if function cdns_hdmi_tmds_char_rate_valid() is not called, > > > > unsupported > > > modes will in mode list. > > > > > > It's probably something we should deal with in the core somehow. I'm > > > not entirely sure how to reconcile drm_bridge_connector and the hdmi > > > framework there, but we should at the very least provide a > > > mode_valid helper for bridges. > > > > I agree with that. In fact, I'm a bit confused about the current > > mode_valid and tmds_char_rate_valid functions. Ideally, we should find > > a way to make tmds_char_rate_valid also work for filtering out the > > mode list, rather than just during atomic_check. > > Yeah, definitely. The way we did so on vc4 for example was to compute the > rate for a 8bpc, RGB, output and try to validate that. I think it would be > reasonable to start with that. > > Maxime
On Fri, 13 Sept 2024 at 11:46, Sandor Yu <sandor.yu@nxp.com> wrote: > > > > Subject: Re: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 > > DP/HDMI driver > > > > On Fri, Sep 06, 2024 at 02:50:08AM GMT, Sandor Yu wrote: > > > > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > > > > > -----Original Message----- > > > > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On > > > > > > Behalf Of Maxime Ripard > > > > > > Sent: 2024年7月2日 21:25 > > > > > > To: Sandor Yu <sandor.yu@nxp.com> > > > > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > > > > neil.armstrong@linaro.org; Laurent Pinchart > > > > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > > > > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > > > > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > > > > shawnguo@kernel.org; s.hauer@pengutronix.de; > > festevam@gmail.com; > > > > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > > > > devicetree@vger.kernel.org; > > > > > > linux-arm-kernel@lists.infradead.org; > > > > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver > > > > > > Brown <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > > > > > > sam@ravnborg.org > > > > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > > > MHDP8501 DP/HDMI driver > > > > > > > > > > > > Hi, > > > > > > > > > > > > There's still the scrambler issue we discussed on v15, but I > > > > > > have some more comments. > > > > > > > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > > > > +cdns_mhdp8501_device *mhdp) { > > > > > > > + u8 hpd = 0xf; > > > > > > > + > > > > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > > > > + if (hpd == 1) > > > > > > > + return connector_status_connected; > > > > > > > + else if (hpd == 0) > > > > > > > + return connector_status_disconnected; > > > > > > > + > > > > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", > > hpd); > > > > > > > + return connector_status_unknown; } > > > > > > > + > > > > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > > > > + struct cdns_mhdp8501_device, > > > > > > > + hotplug_work.work); > > > > > > > + enum drm_connector_status status = > > > > cdns_mhdp8501_detect(mhdp); > > > > > > > + > > > > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > > > > + > > > > > > > + if (status == connector_status_connected) { > > > > > > > + /* Cable connected */ > > > > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > > > > + } else if (status == connector_status_disconnected) { > > > > > > > + /* Cable Disconnected */ > > > > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > > > > + } > > > > > > > +} > > > > > > > > > > > > You shouldn't play with the interrupt being enabled here: > > > > > > hotplug interrupts should always enabled. > > > > > > > > > > > > If you can't for some reason, the reason should be documented in > > > > > > your > > > > driver. > > > > > > > > > > iMX8MQ have two HPD interrupters, one for plugout and the other > > > > > for plugin, because they could not be masked, so we have to enable > > > > > one and > > > > disable the other. > > > > > I will add more comments here. > > > > > > > > Right, but why do you need to enable and disable them? Do you get > > > > spurious interrupts? > > > > > > They don't have status registers and cannot be masked. If they are not > > > disabled, they will continuously generate interrupts. Therefore, I have to > > disable one and enable the other. > > > > Sorry, I still don't get it. How can it be useful to detect hotplug interrupts if it > > constantly sends spurious interrupts when it's enabled? > > Yes, this interrupt is different from a normal one; it's likely a design flaw. > For instance, the plugin interrupt is continuously generated as long as the cable is plugged in, > only stopping when the cable is unplugged. > That's why two interrupts are used to detect cable plugout and plugin separately. > If interrupts aren't used, the only option is polling. I think I've seen such strange design on other platforms, level interrupt for HPD, which needs to be disabled via disable_irq(). > > > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > + ret = phy_init(mhdp->phy); > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > + if (ret) { > > > > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > > > > + goto clk_disable; > > > > > > > + } > > > > > > > + > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > + if (ret) { > > > > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > > > > + goto clk_disable; > > > > > > > + } > > > > > > > > > > > > Why do you need a shared mutex between the phy and HDMI > > controller? > > > > > > > > > > Both PHY and HDMI controller could access to the HDMI firmware by > > > > > mailbox, So add mutex to avoid race condition. > > > > > > > > That should be handled at either the phy or mailbox level, not in > > > > your hdmi driver. > > > > > > In both HDMI driver and PHY driver, every mailbox access had protected > > > by its owns mutex. However, this mutex can only protect each mailbox > > > access within their respective drivers, and it cannot provide > > > protection for access between the HDMI and PHY drivers. > > > > > > The PHY driver only provides two API functions, and these functions > > > are only called in the HDMI driver. Therefore, when accessing these > > > functions, we use a mutex to protect them. This ensures that mailbox > > > access is protected across different PHY and HDMI drivers. > > > > It's really about abstraction. You're using a publicly defined API, and change > > the semantics for your driver only, and that's not ok. > > > > Why can't the mailbox driver itself serialize the accesses from any user, HDMI > > and PHY drivers included? > > > > In the current code implementation, cdns-mhdp-helper.c isn't a standalone driver but rather a library. > It provides fundamental mailbox access functions and basic register read/write operations that rely on the mailbox. > These functions are highly reusable across MHDP8501 and MHDP8546 and can be leveraged by future MHDP versions. > > However, most MHDP firmware interactions involve a sequence of mailbox accesses, including sending commands and receiving firmware responses. > These commands constitute a significant portion of all firmware interactions, encompassing operations like EDID reading and DP link training. > Unfortunately, these commands cannot be reused between MHDP8501 and MHDP8546. > > Creating a dedicated mailbox driver with its own mutex would effectively address race conditions. > However, this would necessitate relocating all mailbox-related functions to this driver. > Including these non-reusable functions would defeat the purpose of code reuse. > > To strike a balance between code reusability and race condition mitigation, adding mutexes to PHY access functions seems like a reasonable solution. You seem to have two kinds of scenarios when talking to MHDP: just cdns_mhdp_mailbox_send(), no response needed and then the cdns_mhdp_mailbox_send() / cdns_mhdp_mailbox_recv_header() / cdns_mhdp_mailbox_recv_data() sequence. Extract those + the mutex access to separate functions, add a mutex to those sequences and use them as a high-level API for your HDMI and PHY drivers. Adding mutexes around phy_foo() calls doesn't look like a proper solution _at_ _all_. > > Sandor > > > > > > > > > > > > > > +static enum drm_mode_status > > > > > > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, > > > > > > > + const struct drm_display_mode *mode, > > > > > > > + unsigned long long tmds_rate) { > > > > > > > + struct cdns_mhdp8501_device *mhdp = > > bridge->driver_private; > > > > > > > + union phy_configure_opts phy_cfg; > > > > > > > + int ret; > > > > > > > + > > > > > > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > > > > > > + > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, > > &phy_cfg); > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > + if (ret < 0) > > > > > > > + return MODE_CLOCK_RANGE; > > > > > > > + > > > > > > > + return MODE_OK; > > > > > > > +} > > > > > > > + > > > > > > > +static enum drm_mode_status > > > > > > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > > > > > > + const struct drm_display_info *info, > > > > > > > + const struct drm_display_mode *mode) { > > > > > > > + unsigned long long tmds_rate; > > > > > > > + > > > > > > > + /* We don't support double-clocked and Interlaced modes */ > > > > > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > > > > > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > > > > > > + return MODE_BAD; > > > > > > > + > > > > > > > + /* MAX support pixel clock rate 594MHz */ > > > > > > > + if (mode->clock > 594000) > > > > > > > + return MODE_CLOCK_HIGH; > > > > > > > > > > > > This needs to be in the tmds_char_rate_valid function > > > > > This clock rate check is covered by function > > > > > tmds_char_rate_valid() It could be removed if keep function > > > > > tmds_char_rate_valid() be called by > > > > mode_valid. > > > > > > > > Yeah, it's not something you should have to duplicate. > > > > > > > > > > > > > > > > > + if (mode->hdisplay > 3840) > > > > > > > + return MODE_BAD_HVALUE; > > > > > > > + > > > > > > > + if (mode->vdisplay > 2160) > > > > > > > + return MODE_BAD_VVALUE; > > > > > > > + > > > > > > > + tmds_rate = mode->clock * 1000ULL; > > > > > > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, > > > > > > > +tmds_rate); > > > > > > > > > > > > It will already be called by the core so this is redundant. > > > > > > > > > > mode_valid function is use to filter the mode list in > > > > > drm_helper_probe_single_connector_modes(), > > > > > if function cdns_hdmi_tmds_char_rate_valid() is not called, > > > > > unsupported > > > > modes will in mode list. > > > > > > > > It's probably something we should deal with in the core somehow. I'm > > > > not entirely sure how to reconcile drm_bridge_connector and the hdmi > > > > framework there, but we should at the very least provide a > > > > mode_valid helper for bridges. > > > > > > I agree with that. In fact, I'm a bit confused about the current > > > mode_valid and tmds_char_rate_valid functions. Ideally, we should find > > > a way to make tmds_char_rate_valid also work for filtering out the > > > mode list, rather than just during atomic_check. > > > > Yeah, definitely. The way we did so on vc4 for example was to compute the > > rate for a 8bpc, RGB, output and try to validate that. I think it would be > > reasonable to start with that. +1, please extract this code as a helper. You can even submit it separately, reworking sun4i and vc4 to use a new helper.
> > On Fri, 13 Sept 2024 at 11:46, Sandor Yu <sandor.yu@nxp.com> wrote: > > > > > > > Subject: Re: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > MHDP8501 DP/HDMI driver > > > > > > On Fri, Sep 06, 2024 at 02:50:08AM GMT, Sandor Yu wrote: > > > > > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > > > > > > -----Original Message----- > > > > > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On > > > > > > > Behalf Of Maxime Ripard > > > > > > > Sent: 2024年7月2日 21:25 > > > > > > > To: Sandor Yu <sandor.yu@nxp.com> > > > > > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > > > > > neil.armstrong@linaro.org; Laurent Pinchart > > > > > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > > > > > jernej.skrabec@gmail.com; airlied@gmail.com; > > > > > > > daniel@ffwll.ch; > > > > > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > > > > > shawnguo@kernel.org; s.hauer@pengutronix.de; > > > festevam@gmail.com; > > > > > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > > > > > devicetree@vger.kernel.org; > > > > > > > linux-arm-kernel@lists.infradead.org; > > > > > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > > > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; > > > > > > > Oliver Brown <oliver.brown@nxp.com>; > > > > > > > alexander.stein@ew.tq-group.com; sam@ravnborg.org > > > > > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > > > > MHDP8501 DP/HDMI driver > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > There's still the scrambler issue we discussed on v15, but I > > > > > > > have some more comments. > > > > > > > > > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > > > > > +cdns_mhdp8501_device *mhdp) { > > > > > > > > + u8 hpd = 0xf; > > > > > > > > + > > > > > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > > > > > + if (hpd == 1) > > > > > > > > + return connector_status_connected; > > > > > > > > + else if (hpd == 0) > > > > > > > > + return connector_status_disconnected; > > > > > > > > + > > > > > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", > > > hpd); > > > > > > > > + return connector_status_unknown; } > > > > > > > > + > > > > > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > > > > > + struct > cdns_mhdp8501_device, > > > > > > > > + > hotplug_work.work); > > > > > > > > + enum drm_connector_status status = > > > > > cdns_mhdp8501_detect(mhdp); > > > > > > > > + > > > > > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > > > > > + > > > > > > > > + if (status == connector_status_connected) { > > > > > > > > + /* Cable connected */ > > > > > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > > > > > + } else if (status == connector_status_disconnected) { > > > > > > > > + /* Cable Disconnected */ > > > > > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > > > > > + } > > > > > > > > +} > > > > > > > > > > > > > > You shouldn't play with the interrupt being enabled here: > > > > > > > hotplug interrupts should always enabled. > > > > > > > > > > > > > > If you can't for some reason, the reason should be > > > > > > > documented in your > > > > > driver. > > > > > > > > > > > > iMX8MQ have two HPD interrupters, one for plugout and the > > > > > > other for plugin, because they could not be masked, so we have > > > > > > to enable one and > > > > > disable the other. > > > > > > I will add more comments here. > > > > > > > > > > Right, but why do you need to enable and disable them? Do you > > > > > get spurious interrupts? > > > > > > > > They don't have status registers and cannot be masked. If they are > > > > not disabled, they will continuously generate interrupts. > > > > Therefore, I have to > > > disable one and enable the other. > > > > > > Sorry, I still don't get it. How can it be useful to detect hotplug > > > interrupts if it constantly sends spurious interrupts when it's enabled? > > > > Yes, this interrupt is different from a normal one; it's likely a design flaw. > > For instance, the plugin interrupt is continuously generated as long > > as the cable is plugged in, only stopping when the cable is unplugged. > > That's why two interrupts are used to detect cable plugout and plugin > separately. > > If interrupts aren't used, the only option is polling. > > I think I've seen such strange design on other platforms, level interrupt for HPD, > which needs to be disabled via disable_irq(). > > > > > > > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > > + ret = phy_init(mhdp->phy); > > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > > + if (ret) { > > > > > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > > > > > + goto clk_disable; > > > > > > > > + } > > > > > > > > + > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > > + if (ret) { > > > > > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > > > > > + goto clk_disable; > > > > > > > > + } > > > > > > > > > > > > > > Why do you need a shared mutex between the phy and HDMI > > > controller? > > > > > > > > > > > > Both PHY and HDMI controller could access to the HDMI firmware > > > > > > by mailbox, So add mutex to avoid race condition. > > > > > > > > > > That should be handled at either the phy or mailbox level, not > > > > > in your hdmi driver. > > > > > > > > In both HDMI driver and PHY driver, every mailbox access had > > > > protected by its owns mutex. However, this mutex can only protect > > > > each mailbox access within their respective drivers, and it cannot > > > > provide protection for access between the HDMI and PHY drivers. > > > > > > > > The PHY driver only provides two API functions, and these > > > > functions are only called in the HDMI driver. Therefore, when > > > > accessing these functions, we use a mutex to protect them. This > > > > ensures that mailbox access is protected across different PHY and HDMI > drivers. > > > > > > It's really about abstraction. You're using a publicly defined API, > > > and change the semantics for your driver only, and that's not ok. > > > > > > Why can't the mailbox driver itself serialize the accesses from any > > > user, HDMI and PHY drivers included? > > > > > > > In the current code implementation, cdns-mhdp-helper.c isn't a standalone > driver but rather a library. > > It provides fundamental mailbox access functions and basic register > read/write operations that rely on the mailbox. > > These functions are highly reusable across MHDP8501 and MHDP8546 and > can be leveraged by future MHDP versions. > > > > However, most MHDP firmware interactions involve a sequence of mailbox > accesses, including sending commands and receiving firmware responses. > > These commands constitute a significant portion of all firmware interactions, > encompassing operations like EDID reading and DP link training. > > Unfortunately, these commands cannot be reused between MHDP8501 and > MHDP8546. > > > > Creating a dedicated mailbox driver with its own mutex would effectively > address race conditions. > > However, this would necessitate relocating all mailbox-related functions to > this driver. > > Including these non-reusable functions would defeat the purpose of code > reuse. > > > > To strike a balance between code reusability and race condition mitigation, > adding mutexes to PHY access functions seems like a reasonable solution. > > You seem to have two kinds of scenarios when talking to MHDP: just > cdns_mhdp_mailbox_send(), no response needed and then the > cdns_mhdp_mailbox_send() / cdns_mhdp_mailbox_recv_header() / > cdns_mhdp_mailbox_recv_data() sequence. Extract those + the mutex access > to separate functions, add a mutex to those sequences and use them as a > high-level API for your HDMI and PHY drivers. > > Adding mutexes around phy_foo() calls doesn't look like a proper solution _at_ > _all_. > Because the sequence cdns_mhdp_mailbox_send() / cdns_mhdp_mailbox_recv_header() / cdns_mhdp_mailbox_recv_data() cannot be reused by different drivers, it's not suitable to abstract them into a separate function. I've noticed some Linux kernel drivers use global mutexes, which can solve the current race conditions problem. I'll implement this in the next version. > > > > Sandor > > > > > > > > > > > > > > > > > +static enum drm_mode_status > > > > > > > > +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge > *bridge, > > > > > > > > + const struct drm_display_mode > *mode, > > > > > > > > + unsigned long long tmds_rate) { > > > > > > > > + struct cdns_mhdp8501_device *mhdp = > > > bridge->driver_private; > > > > > > > > + union phy_configure_opts phy_cfg; > > > > > > > > + int ret; > > > > > > > > + > > > > > > > > + phy_cfg.hdmi.tmds_char_rate = tmds_rate; > > > > > > > > + > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > > + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, > > > &phy_cfg); > > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > > + if (ret < 0) > > > > > > > > + return MODE_CLOCK_RANGE; > > > > > > > > + > > > > > > > > + return MODE_OK; > > > > > > > > +} > > > > > > > > + > > > > > > > > +static enum drm_mode_status > > > > > > > > +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > > > > > > > > + const struct drm_display_info *info, > > > > > > > > + const struct drm_display_mode > *mode) { > > > > > > > > + unsigned long long tmds_rate; > > > > > > > > + > > > > > > > > + /* We don't support double-clocked and Interlaced modes */ > > > > > > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK || > > > > > > > > + mode->flags & DRM_MODE_FLAG_INTERLACE) > > > > > > > > + return MODE_BAD; > > > > > > > > + > > > > > > > > + /* MAX support pixel clock rate 594MHz */ > > > > > > > > + if (mode->clock > 594000) > > > > > > > > + return MODE_CLOCK_HIGH; > > > > > > > > > > > > > > This needs to be in the tmds_char_rate_valid function > > > > > > This clock rate check is covered by function > > > > > > tmds_char_rate_valid() It could be removed if keep function > > > > > > tmds_char_rate_valid() be called by > > > > > mode_valid. > > > > > > > > > > Yeah, it's not something you should have to duplicate. > > > > > > > > > > > > > > > > > > > > + if (mode->hdisplay > 3840) > > > > > > > > + return MODE_BAD_HVALUE; > > > > > > > > + > > > > > > > > + if (mode->vdisplay > 2160) > > > > > > > > + return MODE_BAD_VVALUE; > > > > > > > > + > > > > > > > > + tmds_rate = mode->clock * 1000ULL; > > > > > > > > + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, > > > > > > > > +tmds_rate); > > > > > > > > > > > > > > It will already be called by the core so this is redundant. > > > > > > > > > > > > mode_valid function is use to filter the mode list in > > > > > > drm_helper_probe_single_connector_modes(), > > > > > > if function cdns_hdmi_tmds_char_rate_valid() is not called, > > > > > > unsupported > > > > > modes will in mode list. > > > > > > > > > > It's probably something we should deal with in the core somehow. > > > > > I'm not entirely sure how to reconcile drm_bridge_connector and > > > > > the hdmi framework there, but we should at the very least > > > > > provide a mode_valid helper for bridges. > > > > > > > > I agree with that. In fact, I'm a bit confused about the current > > > > mode_valid and tmds_char_rate_valid functions. Ideally, we should > > > > find a way to make tmds_char_rate_valid also work for filtering > > > > out the mode list, rather than just during atomic_check. > > > > > > Yeah, definitely. The way we did so on vc4 for example was to > > > compute the rate for a 8bpc, RGB, output and try to validate that. I > > > think it would be reasonable to start with that. > > +1, please extract this code as a helper. You can even submit it > separately, reworking sun4i and vc4 to use a new helper. > OK, I would appreciate more time to carefully consider the implementation of this API. B.R Sandor > -- > With best wishes > Dmitry
On Tue, Sep 24, 2024 at 07:04:58AM GMT, Sandor Yu wrote: > > > > > On Fri, 13 Sept 2024 at 11:46, Sandor Yu <sandor.yu@nxp.com> wrote: > > > > > > > > > > Subject: Re: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > MHDP8501 DP/HDMI driver > > > > > > > > On Fri, Sep 06, 2024 at 02:50:08AM GMT, Sandor Yu wrote: > > > > > > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > > > > > > > -----Original Message----- > > > > > > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On > > > > > > > > Behalf Of Maxime Ripard > > > > > > > > Sent: 2024年7月2日 21:25 > > > > > > > > To: Sandor Yu <sandor.yu@nxp.com> > > > > > > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > > > > > > neil.armstrong@linaro.org; Laurent Pinchart > > > > > > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > > > > > > jernej.skrabec@gmail.com; airlied@gmail.com; > > > > > > > > daniel@ffwll.ch; > > > > > > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > > > > > > shawnguo@kernel.org; s.hauer@pengutronix.de; > > > > festevam@gmail.com; > > > > > > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > > > > > > devicetree@vger.kernel.org; > > > > > > > > linux-arm-kernel@lists.infradead.org; > > > > > > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > > > > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; > > > > > > > > Oliver Brown <oliver.brown@nxp.com>; > > > > > > > > alexander.stein@ew.tq-group.com; sam@ravnborg.org > > > > > > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > > > > > MHDP8501 DP/HDMI driver > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > There's still the scrambler issue we discussed on v15, but I > > > > > > > > have some more comments. > > > > > > > > > > > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > > > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > > > > > > +cdns_mhdp8501_device *mhdp) { > > > > > > > > > + u8 hpd = 0xf; > > > > > > > > > + > > > > > > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > > > > > > + if (hpd == 1) > > > > > > > > > + return connector_status_connected; > > > > > > > > > + else if (hpd == 0) > > > > > > > > > + return connector_status_disconnected; > > > > > > > > > + > > > > > > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", > > > > hpd); > > > > > > > > > + return connector_status_unknown; } > > > > > > > > > + > > > > > > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > > > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > > > > > > + struct > > cdns_mhdp8501_device, > > > > > > > > > + > > hotplug_work.work); > > > > > > > > > + enum drm_connector_status status = > > > > > > cdns_mhdp8501_detect(mhdp); > > > > > > > > > + > > > > > > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > > > > > > + > > > > > > > > > + if (status == connector_status_connected) { > > > > > > > > > + /* Cable connected */ > > > > > > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > > > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > > > > > > + } else if (status == connector_status_disconnected) { > > > > > > > > > + /* Cable Disconnected */ > > > > > > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > > > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > > > > > > + } > > > > > > > > > +} > > > > > > > > > > > > > > > > You shouldn't play with the interrupt being enabled here: > > > > > > > > hotplug interrupts should always enabled. > > > > > > > > > > > > > > > > If you can't for some reason, the reason should be > > > > > > > > documented in your > > > > > > driver. > > > > > > > > > > > > > > iMX8MQ have two HPD interrupters, one for plugout and the > > > > > > > other for plugin, because they could not be masked, so we have > > > > > > > to enable one and > > > > > > disable the other. > > > > > > > I will add more comments here. > > > > > > > > > > > > Right, but why do you need to enable and disable them? Do you > > > > > > get spurious interrupts? > > > > > > > > > > They don't have status registers and cannot be masked. If they are > > > > > not disabled, they will continuously generate interrupts. > > > > > Therefore, I have to > > > > disable one and enable the other. > > > > > > > > Sorry, I still don't get it. How can it be useful to detect hotplug > > > > interrupts if it constantly sends spurious interrupts when it's enabled? > > > > > > Yes, this interrupt is different from a normal one; it's likely a design flaw. > > > For instance, the plugin interrupt is continuously generated as long > > > as the cable is plugged in, only stopping when the cable is unplugged. > > > That's why two interrupts are used to detect cable plugout and plugin > > separately. > > > If interrupts aren't used, the only option is polling. > > > > I think I've seen such strange design on other platforms, level interrupt for HPD, > > which needs to be disabled via disable_irq(). > > > > > > > > > > > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > > > + ret = phy_init(mhdp->phy); > > > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > > > + if (ret) { > > > > > > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > > > > > > + goto clk_disable; > > > > > > > > > + } > > > > > > > > > + > > > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > > > + if (ret) { > > > > > > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > > > > > > + goto clk_disable; > > > > > > > > > + } > > > > > > > > > > > > > > > > Why do you need a shared mutex between the phy and HDMI > > > > controller? > > > > > > > > > > > > > > Both PHY and HDMI controller could access to the HDMI firmware > > > > > > > by mailbox, So add mutex to avoid race condition. > > > > > > > > > > > > That should be handled at either the phy or mailbox level, not > > > > > > in your hdmi driver. > > > > > > > > > > In both HDMI driver and PHY driver, every mailbox access had > > > > > protected by its owns mutex. However, this mutex can only protect > > > > > each mailbox access within their respective drivers, and it cannot > > > > > provide protection for access between the HDMI and PHY drivers. > > > > > > > > > > The PHY driver only provides two API functions, and these > > > > > functions are only called in the HDMI driver. Therefore, when > > > > > accessing these functions, we use a mutex to protect them. This > > > > > ensures that mailbox access is protected across different PHY and HDMI > > drivers. > > > > > > > > It's really about abstraction. You're using a publicly defined API, > > > > and change the semantics for your driver only, and that's not ok. > > > > > > > > Why can't the mailbox driver itself serialize the accesses from any > > > > user, HDMI and PHY drivers included? > > > > > > > > > > In the current code implementation, cdns-mhdp-helper.c isn't a standalone > > driver but rather a library. > > > It provides fundamental mailbox access functions and basic register > > read/write operations that rely on the mailbox. > > > These functions are highly reusable across MHDP8501 and MHDP8546 and > > can be leveraged by future MHDP versions. > > > > > > However, most MHDP firmware interactions involve a sequence of mailbox > > accesses, including sending commands and receiving firmware responses. > > > These commands constitute a significant portion of all firmware interactions, > > encompassing operations like EDID reading and DP link training. > > > Unfortunately, these commands cannot be reused between MHDP8501 and > > MHDP8546. > > > > > > Creating a dedicated mailbox driver with its own mutex would effectively > > address race conditions. > > > However, this would necessitate relocating all mailbox-related functions to > > this driver. > > > Including these non-reusable functions would defeat the purpose of code > > reuse. > > > > > > To strike a balance between code reusability and race condition mitigation, > > adding mutexes to PHY access functions seems like a reasonable solution. > > > > You seem to have two kinds of scenarios when talking to MHDP: just > > cdns_mhdp_mailbox_send(), no response needed and then the > > cdns_mhdp_mailbox_send() / cdns_mhdp_mailbox_recv_header() / > > cdns_mhdp_mailbox_recv_data() sequence. Extract those + the mutex access > > to separate functions, add a mutex to those sequences and use them as a > > high-level API for your HDMI and PHY drivers. > > > > Adding mutexes around phy_foo() calls doesn't look like a proper solution _at_ > > _all_. > > > Because the sequence cdns_mhdp_mailbox_send() / cdns_mhdp_mailbox_recv_header() / cdns_mhdp_mailbox_recv_data() cannot be reused by different drivers, > it's not suitable to abstract them into a separate function. Why is it so? In the end, even if one driver uses it and another driver uses other functions (while holding the mutex), please move generic versions of those functions to your helper code. It should abstract _types_ of hardware access (and send/recv_header/recv_data is such an abstraction). > I've noticed some Linux kernel drivers use global mutexes, which can solve the current race conditions problem. > I'll implement this in the next version.
On Fri, Sep 13, 2024 at 09:46:12AM GMT, Sandor Yu wrote: > > Subject: Re: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 > > DP/HDMI driver > > > > On Fri, Sep 06, 2024 at 02:50:08AM GMT, Sandor Yu wrote: > > > > On Tue, Sep 03, 2024 at 06:07:25AM GMT, Sandor Yu wrote: > > > > > > -----Original Message----- > > > > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On > > > > > > Behalf Of Maxime Ripard > > > > > > Sent: 2024年7月2日 21:25 > > > > > > To: Sandor Yu <sandor.yu@nxp.com> > > > > > > Cc: dmitry.baryshkov@linaro.org; andrzej.hajda@intel.com; > > > > > > neil.armstrong@linaro.org; Laurent Pinchart > > > > > > <laurent.pinchart@ideasonboard.com>; jonas@kwiboo.se; > > > > > > jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch; > > > > > > robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > > > > > shawnguo@kernel.org; s.hauer@pengutronix.de; > > festevam@gmail.com; > > > > > > vkoul@kernel.org; dri-devel@lists.freedesktop.org; > > > > > > devicetree@vger.kernel.org; > > > > > > linux-arm-kernel@lists.infradead.org; > > > > > > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > > > > > > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver > > > > > > Brown <oliver.brown@nxp.com>; alexander.stein@ew.tq-group.com; > > > > > > sam@ravnborg.org > > > > > > Subject: [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add > > > > > > MHDP8501 DP/HDMI driver > > > > > > > > > > > > Hi, > > > > > > > > > > > > There's still the scrambler issue we discussed on v15, but I > > > > > > have some more comments. > > > > > > > > > > > > On Tue, Jul 02, 2024 at 08:22:36PM GMT, Sandor Yu wrote: > > > > > > > +enum drm_connector_status cdns_mhdp8501_detect(struct > > > > > > > +cdns_mhdp8501_device *mhdp) { > > > > > > > + u8 hpd = 0xf; > > > > > > > + > > > > > > > + hpd = cdns_mhdp8501_read_hpd(mhdp); > > > > > > > + if (hpd == 1) > > > > > > > + return connector_status_connected; > > > > > > > + else if (hpd == 0) > > > > > > > + return connector_status_disconnected; > > > > > > > + > > > > > > > + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", > > hpd); > > > > > > > + return connector_status_unknown; } > > > > > > > + > > > > > > > +static void hotplug_work_func(struct work_struct *work) { > > > > > > > + struct cdns_mhdp8501_device *mhdp = container_of(work, > > > > > > > + struct cdns_mhdp8501_device, > > > > > > > + hotplug_work.work); > > > > > > > + enum drm_connector_status status = > > > > cdns_mhdp8501_detect(mhdp); > > > > > > > + > > > > > > > + drm_bridge_hpd_notify(&mhdp->bridge, status); > > > > > > > + > > > > > > > + if (status == connector_status_connected) { > > > > > > > + /* Cable connected */ > > > > > > > + DRM_INFO("HDMI/DP Cable Plug In\n"); > > > > > > > + enable_irq(mhdp->irq[IRQ_OUT]); > > > > > > > + } else if (status == connector_status_disconnected) { > > > > > > > + /* Cable Disconnected */ > > > > > > > + DRM_INFO("HDMI/DP Cable Plug Out\n"); > > > > > > > + enable_irq(mhdp->irq[IRQ_IN]); > > > > > > > + } > > > > > > > +} > > > > > > > > > > > > You shouldn't play with the interrupt being enabled here: > > > > > > hotplug interrupts should always enabled. > > > > > > > > > > > > If you can't for some reason, the reason should be documented in > > > > > > your > > > > driver. > > > > > > > > > > iMX8MQ have two HPD interrupters, one for plugout and the other > > > > > for plugin, because they could not be masked, so we have to enable > > > > > one and > > > > disable the other. > > > > > I will add more comments here. > > > > > > > > Right, but why do you need to enable and disable them? Do you get > > > > spurious interrupts? > > > > > > They don't have status registers and cannot be masked. If they are not > > > disabled, they will continuously generate interrupts. Therefore, I have to > > disable one and enable the other. > > > > Sorry, I still don't get it. How can it be useful to detect hotplug interrupts if it > > constantly sends spurious interrupts when it's enabled? > > Yes, this interrupt is different from a normal one; it's likely a design flaw. > For instance, the plugin interrupt is continuously generated as long as the cable is plugged in, > only stopping when the cable is unplugged. > > That's why two interrupts are used to detect cable plugout and plugin > separately. If interrupts aren't used, the only option is polling. Urgh. Ok. At least, you should document that in your code then. > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > + ret = phy_init(mhdp->phy); > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > + if (ret) { > > > > > > > + dev_err(dev, "Failed to initialize PHY: %d\n", ret); > > > > > > > + goto clk_disable; > > > > > > > + } > > > > > > > + > > > > > > > + /* Mailbox protect for HDMI PHY access */ > > > > > > > + mutex_lock(&mhdp->mbox_mutex); > > > > > > > + ret = phy_set_mode(mhdp->phy, phy_mode); > > > > > > > + mutex_unlock(&mhdp->mbox_mutex); > > > > > > > + if (ret) { > > > > > > > + dev_err(dev, "Failed to configure PHY: %d\n", ret); > > > > > > > + goto clk_disable; > > > > > > > + } > > > > > > > > > > > > Why do you need a shared mutex between the phy and HDMI > > controller? > > > > > > > > > > Both PHY and HDMI controller could access to the HDMI firmware by > > > > > mailbox, So add mutex to avoid race condition. > > > > > > > > That should be handled at either the phy or mailbox level, not in > > > > your hdmi driver. > > > > > > In both HDMI driver and PHY driver, every mailbox access had protected > > > by its owns mutex. However, this mutex can only protect each mailbox > > > access within their respective drivers, and it cannot provide > > > protection for access between the HDMI and PHY drivers. > > > > > > The PHY driver only provides two API functions, and these functions > > > are only called in the HDMI driver. Therefore, when accessing these > > > functions, we use a mutex to protect them. This ensures that mailbox > > > access is protected across different PHY and HDMI drivers. > > > > It's really about abstraction. You're using a publicly defined API, and change > > the semantics for your driver only, and that's not ok. > > > > Why can't the mailbox driver itself serialize the accesses from any user, HDMI > > and PHY drivers included? > > In the current code implementation, cdns-mhdp-helper.c isn't a > standalone driver but rather a library. It provides fundamental > mailbox access functions and basic register read/write operations that > rely on the mailbox. These functions are highly reusable across > MHDP8501 and MHDP8546 and can be leveraged by future MHDP versions. > > However, most MHDP firmware interactions involve a sequence of mailbox > accesses, including sending commands and receiving firmware responses. > These commands constitute a significant portion of all firmware > interactions, encompassing operations like EDID reading and DP link > training. Unfortunately, these commands cannot be reused between > MHDP8501 and MHDP8546. > > Creating a dedicated mailbox driver with its own mutex would > effectively address race conditions. However, this would necessitate > relocating all mailbox-related functions to this driver. Including > these non-reusable functions would defeat the purpose of code reuse. > > To strike a balance between code reusability and race condition > mitigation, adding mutexes to PHY access functions seems like a > reasonable solution. No, it's really not. You need to address this in some other way. Why can't you put the mutex in cdns-mhdp-helper.c calls? Maxime
diff --git a/drivers/gpu/drm/bridge/cadence/Kconfig b/drivers/gpu/drm/bridge/cadence/Kconfig index e0973339e9e3..45848e741f5f 100644 --- a/drivers/gpu/drm/bridge/cadence/Kconfig +++ b/drivers/gpu/drm/bridge/cadence/Kconfig @@ -51,3 +51,19 @@ config DRM_CDNS_MHDP8546_J721E initializes the J721E Display Port and sets up the clock and data muxes. endif + +config DRM_CDNS_MHDP8501 + tristate "Cadence MHDP8501 DP/HDMI bridge" + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select CDNS_MHDP_HELPER + select DRM_CDNS_AUDIO + depends on OF + help + Support Cadence MHDP8501 DisplayPort/HDMI bridge. + Cadence MHDP8501 support one or more protocols, + including DisplayPort and HDMI. + To use the DP and HDMI drivers, their respective + specific firmware is required. diff --git a/drivers/gpu/drm/bridge/cadence/Makefile b/drivers/gpu/drm/bridge/cadence/Makefile index 087dc074820d..02c1a9f3cf6f 100644 --- a/drivers/gpu/drm/bridge/cadence/Makefile +++ b/drivers/gpu/drm/bridge/cadence/Makefile @@ -6,3 +6,5 @@ obj-$(CONFIG_CDNS_MHDP_HELPER) += cdns-mhdp-helper.o obj-$(CONFIG_DRM_CDNS_MHDP8546) += cdns-mhdp8546.o cdns-mhdp8546-y := cdns-mhdp8546-core.o cdns-mhdp8546-hdcp.o cdns-mhdp8546-$(CONFIG_DRM_CDNS_MHDP8546_J721E) += cdns-mhdp8546-j721e.o +obj-$(CONFIG_DRM_CDNS_MHDP8501) += cdns-mhdp8501.o +cdns-mhdp8501-y := cdns-mhdp8501-core.o cdns-mhdp8501-dp.o cdns-mhdp8501-hdmi.o diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c new file mode 100644 index 000000000000..c306db982b76 --- /dev/null +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cadence Display Port Interface (DP) driver + * + * Copyright (C) 2023, 2024 NXP Semiconductor, Inc. + * + */ +#include <drm/drm_of.h> +#include <drm/drm_print.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> + +#include "cdns-mhdp8501-core.h" + +static int cdns_mhdp8501_read_hpd(struct cdns_mhdp8501_device *mhdp) +{ + u8 status; + int ret; + + mutex_lock(&mhdp->mbox_mutex); + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_GENERAL, + GENERAL_GET_HPD_STATE, 0, NULL); + if (ret) + goto err_get_hpd; + + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_GENERAL, + GENERAL_GET_HPD_STATE, + sizeof(status)); + if (ret) + goto err_get_hpd; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, &status, sizeof(status)); + if (ret) + goto err_get_hpd; + + mutex_unlock(&mhdp->mbox_mutex); + + return status; + +err_get_hpd: + dev_err(mhdp->dev, "read hpd failed: %d\n", ret); + mutex_unlock(&mhdp->mbox_mutex); + + return ret; +} + +enum drm_connector_status cdns_mhdp8501_detect(struct cdns_mhdp8501_device *mhdp) +{ + u8 hpd = 0xf; + + hpd = cdns_mhdp8501_read_hpd(mhdp); + if (hpd == 1) + return connector_status_connected; + else if (hpd == 0) + return connector_status_disconnected; + + dev_warn(mhdp->dev, "Unknown cable status, hdp=%u\n", hpd); + return connector_status_unknown; +} + +static void hotplug_work_func(struct work_struct *work) +{ + struct cdns_mhdp8501_device *mhdp = container_of(work, + struct cdns_mhdp8501_device, + hotplug_work.work); + enum drm_connector_status status = cdns_mhdp8501_detect(mhdp); + + drm_bridge_hpd_notify(&mhdp->bridge, status); + + if (status == connector_status_connected) { + /* Cable connected */ + DRM_INFO("HDMI/DP Cable Plug In\n"); + enable_irq(mhdp->irq[IRQ_OUT]); + } else if (status == connector_status_disconnected) { + /* Cable Disconnected */ + DRM_INFO("HDMI/DP Cable Plug Out\n"); + enable_irq(mhdp->irq[IRQ_IN]); + } +} + +static irqreturn_t cdns_mhdp8501_irq_thread(int irq, void *data) +{ + struct cdns_mhdp8501_device *mhdp = data; + + disable_irq_nosync(irq); + + mod_delayed_work(system_wq, &mhdp->hotplug_work, + msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); + + return IRQ_HANDLED; +} + +static int cdns_mhdp8501_dt_parse(struct cdns_mhdp8501_device *mhdp, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *remote; + + remote = of_graph_get_remote_node(np, 1, 0); + if (!remote) { + dev_err(dev, "fail to get remote node\n"); + of_node_put(remote); + return -EINVAL; + } + + /* get connector type */ + if (of_device_is_compatible(remote, "hdmi-connector")) { + mhdp->connector_type = DRM_MODE_CONNECTOR_HDMIA; + + } else if (of_device_is_compatible(remote, "dp-connector")) { + mhdp->connector_type = DRM_MODE_CONNECTOR_DisplayPort; + + } else { + dev_err(dev, "Unknown connector type\n"); + of_node_put(remote); + return -EINVAL; + } + + of_node_put(remote); + return true; +} + +static void cdns_mhdp8501_add_bridge(struct cdns_mhdp8501_device *mhdp) +{ + mhdp->bridge.type = mhdp->connector_type; + mhdp->bridge.driver_private = mhdp; + mhdp->bridge.of_node = mhdp->dev->of_node; + mhdp->bridge.vendor = "NXP"; + mhdp->bridge.product = "i.MX8"; + mhdp->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | + DRM_BRIDGE_OP_HPD; + + if (mhdp->connector_type == DRM_MODE_CONNECTOR_HDMIA) { + mhdp->bridge.funcs = &cdns_hdmi_bridge_funcs; + mhdp->bridge.ops |= DRM_BRIDGE_OP_HDMI; + } else if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { + mhdp->bridge.funcs = &cdns_dp_bridge_funcs; + } else { + dev_err(mhdp->dev, "Unsupported connector type!\n"); + return; + } + + drm_bridge_add(&mhdp->bridge); +} + +static int cdns_mhdp8501_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cdns_mhdp8501_device *mhdp; + struct resource *res; + enum phy_mode phy_mode; + u32 reg; + int ret; + + mhdp = devm_kzalloc(dev, sizeof(*mhdp), GFP_KERNEL); + if (!mhdp) + return -ENOMEM; + + mutex_init(&mhdp->mbox_mutex); + mhdp->dev = dev; + + INIT_DELAYED_WORK(&mhdp->hotplug_work, hotplug_work_func); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + mhdp->regs = devm_ioremap(dev, res->start, resource_size(res)); + if (IS_ERR(mhdp->regs)) + return PTR_ERR(mhdp->regs); + + ret = cdns_mhdp8501_dt_parse(mhdp, pdev); + if (ret < 0) + return -EINVAL; + + mhdp->phy = devm_of_phy_get_by_index(dev, pdev->dev.of_node, 0); + if (IS_ERR(mhdp->phy)) + return dev_err_probe(dev, PTR_ERR(mhdp->phy), "no PHY configured\n"); + + mhdp->irq[IRQ_IN] = platform_get_irq_byname(pdev, "plug_in"); + if (mhdp->irq[IRQ_IN] < 0) + return dev_err_probe(dev, mhdp->irq[IRQ_IN], "No plug_in irq number\n"); + + mhdp->irq[IRQ_OUT] = platform_get_irq_byname(pdev, "plug_out"); + if (mhdp->irq[IRQ_OUT] < 0) + return dev_err_probe(dev, mhdp->irq[IRQ_OUT], "No plug_out irq number\n"); + + irq_set_status_flags(mhdp->irq[IRQ_IN], IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_IN], + NULL, cdns_mhdp8501_irq_thread, + IRQF_ONESHOT, dev_name(dev), mhdp); + if (ret < 0) { + dev_err(dev, "can't claim irq %d\n", mhdp->irq[IRQ_IN]); + return -EINVAL; + } + + irq_set_status_flags(mhdp->irq[IRQ_OUT], IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(dev, mhdp->irq[IRQ_OUT], + NULL, cdns_mhdp8501_irq_thread, + IRQF_ONESHOT, dev_name(dev), mhdp); + if (ret < 0) { + dev_err(dev, "can't claim irq %d\n", mhdp->irq[IRQ_OUT]); + return -EINVAL; + } + + /* set default lane mapping */ + mhdp->lane_mapping = LANE_MAPPING_NORMAL; + + /* cdns_mhdp8501_dt_parse() ensures connector_type is valid */ + mhdp->plat_data = of_device_get_match_data(dev); + if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { + mhdp->lane_mapping = mhdp->plat_data->dp_lane_mapping; + phy_mode = PHY_MODE_DP; + } else if (mhdp->connector_type == DRM_MODE_CONNECTOR_HDMIA) { + mhdp->lane_mapping = mhdp->plat_data->hdmi_lane_mapping; + phy_mode = PHY_MODE_HDMI; + } + + dev_set_drvdata(dev, mhdp); + + /* init base struct for access mhdp mailbox */ + mhdp->base.dev = mhdp->dev; + mhdp->base.regs = mhdp->regs; + mhdp->base.mbox_mutex = &mhdp->mbox_mutex; + + if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { + drm_dp_aux_init(&mhdp->dp.aux); + mhdp->dp.aux.name = "mhdp8501_dp_aux"; + mhdp->dp.aux.dev = dev; + mhdp->dp.aux.transfer = cdns_dp_aux_transfer; + } + + /* Enable APB clock */ + mhdp->apb_clk = devm_clk_get(dev, NULL); + if (IS_ERR(mhdp->apb_clk)) + return dev_err_probe(dev, PTR_ERR(mhdp->apb_clk), + "couldn't get apb clk\n"); + + clk_prepare_enable(mhdp->apb_clk); + + /* + * Wait for the KEEP_ALIVE "message" on the first 8 bits. + * Updated each sched "tick" (~2ms) + */ + ret = readl_poll_timeout(mhdp->regs + KEEP_ALIVE, reg, + reg & CDNS_KEEP_ALIVE_MASK, 500, + CDNS_KEEP_ALIVE_TIMEOUT); + if (ret) { + dev_err(dev, "device didn't give any life sign: reg %d\n", reg); + goto clk_disable; + } + + /* Mailbox protect for HDMI PHY access */ + mutex_lock(&mhdp->mbox_mutex); + ret = phy_init(mhdp->phy); + mutex_unlock(&mhdp->mbox_mutex); + if (ret) { + dev_err(dev, "Failed to initialize PHY: %d\n", ret); + goto clk_disable; + } + + /* Mailbox protect for HDMI PHY access */ + mutex_lock(&mhdp->mbox_mutex); + ret = phy_set_mode(mhdp->phy, phy_mode); + mutex_unlock(&mhdp->mbox_mutex); + if (ret) { + dev_err(dev, "Failed to configure PHY: %d\n", ret); + goto clk_disable; + } + + /* Enable cable hotplug detect */ + if (cdns_mhdp8501_read_hpd(mhdp)) + enable_irq(mhdp->irq[IRQ_OUT]); + else + enable_irq(mhdp->irq[IRQ_IN]); + + cdns_mhdp8501_add_bridge(mhdp); + + return 0; + +clk_disable: + clk_disable_unprepare(mhdp->apb_clk); + + return -EINVAL; +} + +static void cdns_mhdp8501_remove(struct platform_device *pdev) +{ + struct cdns_mhdp8501_device *mhdp = platform_get_drvdata(pdev); + + if (mhdp->connector_type == DRM_MODE_CONNECTOR_DisplayPort) + cdns_dp_aux_destroy(mhdp); + + drm_bridge_remove(&mhdp->bridge); + clk_disable_unprepare(mhdp->apb_clk); +} + +static struct mhdp8501_plat_data imx8mq_mhdp_drv_data = { + .hdmi_lane_mapping = LANE_MAPPING_FLIPPED, + .dp_lane_mapping = LANE_MAPPING_IMX8MQ_DP, +}; + +static const struct of_device_id cdns_mhdp8501_dt_ids[] = { + { .compatible = "fsl,imx8mq-mhdp8501", + .data = &imx8mq_mhdp_drv_data + }, + { }, +}; +MODULE_DEVICE_TABLE(of, cdns_mhdp8501_dt_ids); + +static struct platform_driver cdns_mhdp8501_driver = { + .probe = cdns_mhdp8501_probe, + .remove = cdns_mhdp8501_remove, + .driver = { + .name = "cdns-mhdp8501", + .of_match_table = cdns_mhdp8501_dt_ids, + }, +}; + +module_platform_driver(cdns_mhdp8501_driver); + +MODULE_AUTHOR("Sandor Yu <sandor.yu@nxp.com>"); +MODULE_DESCRIPTION("Cadence MHDP8501 bridge driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h new file mode 100644 index 000000000000..593071f36995 --- /dev/null +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h @@ -0,0 +1,367 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence MHDP 8501 Common head file + * + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. + * + */ + +#ifndef _CDNS_MHDP8501_CORE_H_ +#define _CDNS_MHDP8501_CORE_H_ + +#include <drm/bridge/cdns-mhdp-helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_connector.h> +#include <drm/display/drm_dp_helper.h> +#include <linux/bitops.h> + +#define ADDR_IMEM 0x10000 +#define ADDR_DMEM 0x20000 + +/* APB CFG addr */ +#define APB_CTRL 0 +#define XT_INT_CTRL 0x04 +#define MAILBOX_FULL_ADDR 0x08 +#define MAILBOX_EMPTY_ADDR 0x0c +#define MAILBOX0_WR_DATA 0x10 +#define MAILBOX0_RD_DATA 0x14 +#define KEEP_ALIVE 0x18 +#define VER_L 0x1c +#define VER_H 0x20 +#define VER_LIB_L_ADDR 0x24 +#define VER_LIB_H_ADDR 0x28 +#define SW_DEBUG_L 0x2c +#define SW_DEBUG_H 0x30 +#define MAILBOX_INT_MASK 0x34 +#define MAILBOX_INT_STATUS 0x38 +#define SW_CLK_L 0x3c +#define SW_CLK_H 0x40 +#define SW_EVENTS0 0x44 +#define SW_EVENTS1 0x48 +#define SW_EVENTS2 0x4c +#define SW_EVENTS3 0x50 +#define XT_OCD_CTRL 0x60 +#define APB_INT_MASK 0x6c +#define APB_STATUS_MASK 0x70 + +/* Source phy comp */ +#define PHY_DATA_SEL 0x0818 +#define LANES_CONFIG 0x0814 + +/* Source CAR Addr */ +#define SOURCE_HDTX_CAR 0x0900 +#define SOURCE_DPTX_CAR 0x0904 +#define SOURCE_PHY_CAR 0x0908 +#define SOURCE_CEC_CAR 0x090c +#define SOURCE_CBUS_CAR 0x0910 +#define SOURCE_PKT_CAR 0x0918 +#define SOURCE_AIF_CAR 0x091c +#define SOURCE_CIPHER_CAR 0x0920 +#define SOURCE_CRYPTO_CAR 0x0924 + +/* clock meters addr */ +#define CM_CTRL 0x0a00 +#define CM_I2S_CTRL 0x0a04 +#define CM_SPDIF_CTRL 0x0a08 +#define CM_VID_CTRL 0x0a0c +#define CM_LANE_CTRL 0x0a10 +#define I2S_NM_STABLE 0x0a14 +#define I2S_NCTS_STABLE 0x0a18 +#define SPDIF_NM_STABLE 0x0a1c +#define SPDIF_NCTS_STABLE 0x0a20 +#define NMVID_MEAS_STABLE 0x0a24 +#define I2S_MEAS 0x0a40 +#define SPDIF_MEAS 0x0a80 +#define NMVID_MEAS 0x0ac0 + +/* source vif addr */ +#define BND_HSYNC2VSYNC 0x0b00 +#define HSYNC2VSYNC_F1_L1 0x0b04 +#define HSYNC2VSYNC_STATUS 0x0b0c +#define HSYNC2VSYNC_POL_CTRL 0x0b10 + +/* MHDP TX_top_comp */ +#define SCHEDULER_H_SIZE 0x1000 +#define SCHEDULER_V_SIZE 0x1004 +#define HDTX_SIGNAL_FRONT_WIDTH 0x100c +#define HDTX_SIGNAL_SYNC_WIDTH 0x1010 +#define HDTX_SIGNAL_BACK_WIDTH 0x1014 +#define HDTX_CONTROLLER 0x1018 +#define HDTX_HPD 0x1020 +#define HDTX_CLOCK_REG_0 0x1024 +#define HDTX_CLOCK_REG_1 0x1028 + +/* DPTX hpd addr */ +#define HPD_IRQ_DET_MIN_TIMER 0x2100 +#define HPD_IRQ_DET_MAX_TIMER 0x2104 +#define HPD_UNPLGED_DET_MIN_TIMER 0x2108 +#define HPD_STABLE_TIMER 0x210c +#define HPD_FILTER_TIMER 0x2110 +#define HPD_EVENT_MASK 0x211c +#define HPD_EVENT_DET 0x2120 + +/* DPTX framer addr */ +#define DP_FRAMER_GLOBAL_CONFIG 0x2200 +#define DP_SW_RESET 0x2204 +#define DP_FRAMER_TU 0x2208 +#define DP_FRAMER_PXL_REPR 0x220c +#define DP_FRAMER_SP 0x2210 +#define AUDIO_PACK_CONTROL 0x2214 +#define DP_VC_TABLE(x) (0x2218 + ((x) << 2)) +#define DP_VB_ID 0x2258 +#define DP_MTPH_LVP_CONTROL 0x225c +#define DP_MTPH_SYMBOL_VALUES 0x2260 +#define DP_MTPH_ECF_CONTROL 0x2264 +#define DP_MTPH_ACT_CONTROL 0x2268 +#define DP_MTPH_STATUS 0x226c +#define DP_INTERRUPT_SOURCE 0x2270 +#define DP_INTERRUPT_MASK 0x2274 +#define DP_FRONT_BACK_PORCH 0x2278 +#define DP_BYTE_COUNT 0x227c + +/* DPTX stream addr */ +#define MSA_HORIZONTAL_0 0x2280 +#define MSA_HORIZONTAL_1 0x2284 +#define MSA_VERTICAL_0 0x2288 +#define MSA_VERTICAL_1 0x228c +#define MSA_MISC 0x2290 +#define STREAM_CONFIG 0x2294 +#define AUDIO_PACK_STATUS 0x2298 +#define VIF_STATUS 0x229c +#define PCK_STUFF_STATUS_0 0x22a0 +#define PCK_STUFF_STATUS_1 0x22a4 +#define INFO_PACK_STATUS 0x22a8 +#define RATE_GOVERNOR_STATUS 0x22ac +#define DP_HORIZONTAL 0x22b0 +#define DP_VERTICAL_0 0x22b4 +#define DP_VERTICAL_1 0x22b8 +#define DP_BLOCK_SDP 0x22bc + +/* DPTX glbl addr */ +#define DPTX_LANE_EN 0x2300 +#define DPTX_ENHNCD 0x2304 +#define DPTX_INT_MASK 0x2308 +#define DPTX_INT_STATUS 0x230c + +/* DP AUX Addr */ +#define DP_AUX_HOST_CONTROL 0x2800 +#define DP_AUX_INTERRUPT_SOURCE 0x2804 +#define DP_AUX_INTERRUPT_MASK 0x2808 +#define DP_AUX_SWAP_INVERSION_CONTROL 0x280c +#define DP_AUX_SEND_NACK_TRANSACTION 0x2810 +#define DP_AUX_CLEAR_RX 0x2814 +#define DP_AUX_CLEAR_TX 0x2818 +#define DP_AUX_TIMER_STOP 0x281c +#define DP_AUX_TIMER_CLEAR 0x2820 +#define DP_AUX_RESET_SW 0x2824 +#define DP_AUX_DIVIDE_2M 0x2828 +#define DP_AUX_TX_PREACHARGE_LENGTH 0x282c +#define DP_AUX_FREQUENCY_1M_MAX 0x2830 +#define DP_AUX_FREQUENCY_1M_MIN 0x2834 +#define DP_AUX_RX_PRE_MIN 0x2838 +#define DP_AUX_RX_PRE_MAX 0x283c +#define DP_AUX_TIMER_PRESET 0x2840 +#define DP_AUX_NACK_FORMAT 0x2844 +#define DP_AUX_TX_DATA 0x2848 +#define DP_AUX_RX_DATA 0x284c +#define DP_AUX_TX_STATUS 0x2850 +#define DP_AUX_RX_STATUS 0x2854 +#define DP_AUX_RX_CYCLE_COUNTER 0x2858 +#define DP_AUX_MAIN_STATES 0x285c +#define DP_AUX_MAIN_TIMER 0x2860 +#define DP_AUX_AFE_OUT 0x2864 + +/* source pif addr */ +#define SOURCE_PIF_WR_ADDR 0x30800 +#define SOURCE_PIF_WR_REQ 0x30804 +#define SOURCE_PIF_RD_ADDR 0x30808 +#define SOURCE_PIF_RD_REQ 0x3080c +#define SOURCE_PIF_DATA_WR 0x30810 +#define SOURCE_PIF_DATA_RD 0x30814 +#define SOURCE_PIF_FIFO1_FLUSH 0x30818 +#define SOURCE_PIF_FIFO2_FLUSH 0x3081c +#define SOURCE_PIF_STATUS 0x30820 +#define SOURCE_PIF_INTERRUPT_SOURCE 0x30824 +#define SOURCE_PIF_INTERRUPT_MASK 0x30828 +#define SOURCE_PIF_PKT_ALLOC_REG 0x3082c +#define SOURCE_PIF_PKT_ALLOC_WR_EN 0x30830 +#define SOURCE_PIF_SW_RESET 0x30834 + +#define LINK_TRAINING_NOT_ACTIV 0 +#define LINK_TRAINING_RUN 1 +#define LINK_TRAINING_RESTART 2 + +#define CONTROL_VIDEO_IDLE 0 +#define CONTROL_VIDEO_VALID 1 + +#define INTERLACE_FMT_DET BIT(12) +#define VIF_BYPASS_INTERLACE BIT(13) +#define TU_CNT_RST_EN BIT(15) +#define INTERLACE_DTCT_WIN 0x20 + +#define DP_FRAMER_SP_INTERLACE_EN BIT(2) +#define DP_FRAMER_SP_HSP BIT(1) +#define DP_FRAMER_SP_VSP BIT(0) + +/* Capability */ +#define AUX_HOST_INVERT 3 +#define FAST_LT_SUPPORT 1 +#define FAST_LT_NOT_SUPPORT 0 +#define LANE_MAPPING_NORMAL 0x1b +#define LANE_MAPPING_FLIPPED 0xe4 +#define LANE_MAPPING_IMX8MQ_DP 0xc6 +#define ENHANCED 1 +#define SCRAMBLER_EN BIT(4) + +#define FULL_LT_STARTED BIT(0) +#define FASE_LT_STARTED BIT(1) +#define CLK_RECOVERY_FINISHED BIT(2) +#define EQ_PHASE_FINISHED BIT(3) +#define FASE_LT_START_FINISHED BIT(4) +#define CLK_RECOVERY_FAILED BIT(5) +#define EQ_PHASE_FAILED BIT(6) +#define FASE_LT_FAILED BIT(7) + +#define TU_SIZE 30 +#define CDNS_DP_MAX_LINK_RATE 540000 + +#define F_HDMI_ENCODING(x) (((x) & ((1 << 2) - 1)) << 16) +#define F_VIF_DATA_WIDTH(x) (((x) & ((1 << 2) - 1)) << 2) +#define F_HDMI_MODE(x) (((x) & ((1 << 2) - 1)) << 0) +#define F_GCP_EN(x) (((x) & ((1 << 1) - 1)) << 12) +#define F_DATA_EN(x) (((x) & ((1 << 1) - 1)) << 15) +#define F_CLEAR_AVMUTE(x) (((x) & ((1 << 1) - 1)) << 14) +#define F_HDMI2_PREAMBLE_EN(x) (((x) & ((1 << 1) - 1)) << 18) +#define F_PIC_3D(x) (((x) & ((1 << 4) - 1)) << 7) +#define F_BCH_EN(x) (((x) & ((1 << 1) - 1)) << 11) +#define F_SOURCE_PHY_MHDP_SEL(x) (((x) & ((1 << 2) - 1)) << 3) +#define F_HPD_VALID_WIDTH(x) (((x) & ((1 << 12) - 1)) << 0) +#define F_HPD_GLITCH_WIDTH(x) (((x) & ((1 << 8) - 1)) << 12) +#define F_HDMI2_CTRL_IL_MODE(x) (((x) & ((1 << 1) - 1)) << 19) +#define F_SOURCE_PHY_LANE0_SWAP(x) (((x) & ((1 << 2) - 1)) << 0) +#define F_SOURCE_PHY_LANE1_SWAP(x) (((x) & ((1 << 2) - 1)) << 2) +#define F_SOURCE_PHY_LANE2_SWAP(x) (((x) & ((1 << 2) - 1)) << 4) +#define F_SOURCE_PHY_LANE3_SWAP(x) (((x) & ((1 << 2) - 1)) << 6) +#define F_SOURCE_PHY_COMB_BYPASS(x) (((x) & ((1 << 1) - 1)) << 21) +#define F_SOURCE_PHY_20_10(x) (((x) & ((1 << 1) - 1)) << 22) +#define F_PKT_ALLOC_ADDRESS(x) (((x) & ((1 << 4) - 1)) << 0) +#define F_ACTIVE_IDLE_TYPE(x) (((x) & ((1 << 1) - 1)) << 17) +#define F_FIFO1_FLUSH(x) (((x) & ((1 << 1) - 1)) << 0) +#define F_PKT_ALLOC_WR_EN(x) (((x) & ((1 << 1) - 1)) << 0) +#define F_DATA_WR(x) (x) +#define F_WR_ADDR(x) (((x) & ((1 << 4) - 1)) << 0) +#define F_HOST_WR(x) (((x) & ((1 << 1) - 1)) << 0) +#define F_TYPE_VALID(x) (((x) & ((1 << 1) - 1)) << 16) +#define F_PACKET_TYPE(x) (((x) & ((1 << 8) - 1)) << 8) + +/* Reference cycles when using lane clock as reference */ +#define LANE_REF_CYC 0x8000 + +/* HPD Debounce */ +#define HOTPLUG_DEBOUNCE_MS 200 + +/* HPD IRQ Index */ +#define IRQ_IN 0 +#define IRQ_OUT 1 +#define IRQ_NUM 2 + +/* FW check alive timeout */ +#define CDNS_KEEP_ALIVE_TIMEOUT 2000 +#define CDNS_KEEP_ALIVE_MASK GENMASK(7, 0) + +enum voltage_swing_level { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pre_emphasis_level { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum pattern_set { + PTS1 = BIT(0), + PTS2 = BIT(1), + PTS3 = BIT(2), + PTS4 = BIT(3), + DP_NONE = BIT(4) +}; + +enum vic_color_depth { + BCS_6 = 0x1, + BCS_8 = 0x2, + BCS_10 = 0x4, + BCS_12 = 0x8, + BCS_16 = 0x10, +}; + +enum vic_bt_type { + BT_601 = 0x0, + BT_709 = 0x1, +}; + +enum { + MODE_DVI, + MODE_HDMI_1_4, + MODE_HDMI_2_0, +}; + +struct video_info { + int bpc; + int color_fmt; +}; + +struct mhdp8501_plat_data { + int hdmi_lane_mapping; + int dp_lane_mapping; +}; + +struct cdns_mhdp8501_device { + struct cdns_mhdp_base base; + + struct device *dev; + void __iomem *regs; + struct drm_connector *curr_conn; + struct drm_bridge bridge; + struct clk *apb_clk; + struct phy *phy; + + struct video_info video_info; + struct drm_display_mode mode; + + int irq[IRQ_NUM]; + struct delayed_work hotplug_work; + int connector_type; + u32 lane_mapping; + + /* protect mailbox communications with the firmware */ + struct mutex mbox_mutex; + + const struct mhdp8501_plat_data *plat_data; + + union { + struct _dp_data { + u32 rate; + u8 num_lanes; + struct drm_dp_aux aux; + u8 dpcd[DP_RECEIVER_CAP_SIZE]; + } dp; + struct _hdmi_data { + u32 hdmi_type; + unsigned long long char_rate; + } hdmi; + }; +}; + +extern const struct drm_bridge_funcs cdns_dp_bridge_funcs; +extern const struct drm_bridge_funcs cdns_hdmi_bridge_funcs; + +ssize_t cdns_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg); +enum drm_connector_status cdns_mhdp8501_detect(struct cdns_mhdp8501_device *mhdp); +int cdns_dp_aux_destroy(struct cdns_mhdp8501_device *mhdp); + +#endif diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c new file mode 100644 index 000000000000..d8cc31daf322 --- /dev/null +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c @@ -0,0 +1,700 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cadence MHDP8501 DisplayPort(DP) bridge driver + * + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. + * + */ +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_print.h> +#include <linux/phy/phy.h> +#include <linux/phy/phy-dp.h> + +#include "cdns-mhdp8501-core.h" + +#define LINK_TRAINING_TIMEOUT_MS 500 +#define LINK_TRAINING_RETRY_MS 20 + +ssize_t cdns_dp_aux_transfer(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg) +{ + struct cdns_mhdp8501_device *mhdp = dev_get_drvdata(aux->dev); + bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ); + int ret; + + /* Ignore address only message */ + if (!msg->size || !msg->buffer) { + msg->reply = native ? + DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK; + return msg->size; + } + + if (!native) { + dev_err(mhdp->dev, "%s: only native messages supported\n", __func__); + return -EINVAL; + } + + /* msg sanity check */ + if (msg->size > DP_AUX_MAX_PAYLOAD_BYTES) { + dev_err(mhdp->dev, "%s: invalid msg: size(%zu), request(%x)\n", + __func__, msg->size, (unsigned int)msg->request); + return -EINVAL; + } + + if (msg->request == DP_AUX_NATIVE_WRITE) { + const u8 *buf = msg->buffer; + int i; + + for (i = 0; i < msg->size; ++i) { + ret = cdns_mhdp_dpcd_write(&mhdp->base, + msg->address + i, buf[i]); + if (ret < 0) { + dev_err(mhdp->dev, "Failed to write DPCD\n"); + return ret; + } + } + msg->reply = DP_AUX_NATIVE_REPLY_ACK; + return msg->size; + } + + if (msg->request == DP_AUX_NATIVE_READ) { + ret = cdns_mhdp_dpcd_read(&mhdp->base, msg->address, + msg->buffer, msg->size); + if (ret < 0) + return ret; + msg->reply = DP_AUX_NATIVE_REPLY_ACK; + return msg->size; + } + return 0; +} + +int cdns_dp_aux_destroy(struct cdns_mhdp8501_device *mhdp) +{ + drm_dp_aux_unregister(&mhdp->dp.aux); + + return 0; +} + +static int cdns_dp_get_msa_misc(struct video_info *video) +{ + u32 msa_misc; + u8 color_space = 0; + u8 bpc = 0; + + switch (video->color_fmt) { + /* set YUV default color space conversion to BT601 */ + case DRM_COLOR_FORMAT_YCBCR444: + color_space = 6 + BT_601 * 8; + break; + case DRM_COLOR_FORMAT_YCBCR422: + color_space = 5 + BT_601 * 8; + break; + case DRM_COLOR_FORMAT_YCBCR420: + color_space = 5; + break; + case DRM_COLOR_FORMAT_RGB444: + default: + color_space = 0; + break; + }; + + switch (video->bpc) { + case 6: + bpc = 0; + break; + case 10: + bpc = 2; + break; + case 12: + bpc = 3; + break; + case 16: + bpc = 4; + break; + case 8: + default: + bpc = 1; + break; + }; + + msa_misc = (bpc << 5) | (color_space << 1); + + return msa_misc; +} + +static int cdns_dp_config_video(struct cdns_mhdp8501_device *mhdp) +{ + struct video_info *video = &mhdp->video_info; + struct drm_display_mode *mode = &mhdp->mode; + bool h_sync_polarity, v_sync_polarity; + u64 symbol; + u32 val, link_rate, rem; + u8 bit_per_pix, tu_size_reg = TU_SIZE; + int ret; + + bit_per_pix = (video->color_fmt == DRM_COLOR_FORMAT_YCBCR422) ? + (video->bpc * 2) : (video->bpc * 3); + + link_rate = mhdp->dp.rate / 1000; + + ret = cdns_mhdp_reg_write(&mhdp->base, BND_HSYNC2VSYNC, VIF_BYPASS_INTERLACE); + if (ret) + goto err_config_video; + + ret = cdns_mhdp_reg_write(&mhdp->base, HSYNC2VSYNC_POL_CTRL, 0); + if (ret) + goto err_config_video; + + /* + * get a best tu_size and valid symbol: + * 1. chose Lclk freq(162Mhz, 270Mhz, 540Mhz), set TU to 32 + * 2. calculate VS(valid symbol) = TU * Pclk * Bpp / (Lclk * Lanes) + * 3. if VS > *.85 or VS < *.1 or VS < 2 or TU < VS + 4, then set + * TU += 2 and repeat 2nd step. + */ + do { + tu_size_reg += 2; + symbol = tu_size_reg * mode->clock * bit_per_pix; + do_div(symbol, mhdp->dp.num_lanes * link_rate * 8); + rem = do_div(symbol, 1000); + if (tu_size_reg > 64) { + ret = -EINVAL; + dev_err(mhdp->dev, "tu error, clk:%d, lanes:%d, rate:%d\n", + mode->clock, mhdp->dp.num_lanes, link_rate); + goto err_config_video; + } + } while ((symbol <= 1) || (tu_size_reg - symbol < 4) || + (rem > 850) || (rem < 100)); + + val = symbol + (tu_size_reg << 8); + val |= TU_CNT_RST_EN; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_TU, val); + if (ret) + goto err_config_video; + + /* set the FIFO Buffer size */ + val = div_u64(mode->clock * (symbol + 1), 1000) + link_rate; + val /= (mhdp->dp.num_lanes * link_rate); + val = div_u64(8 * (symbol + 1), bit_per_pix) - val; + val += 2; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VC_TABLE(15), val); + + switch (video->bpc) { + case 6: + val = BCS_6; + break; + case 10: + val = BCS_10; + break; + case 12: + val = BCS_12; + break; + case 16: + val = BCS_16; + break; + case 8: + default: + val = BCS_8; + break; + }; + + val += video->color_fmt << 8; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_PXL_REPR, val); + if (ret) + goto err_config_video; + + v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC); + h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC); + + val = h_sync_polarity ? DP_FRAMER_SP_HSP : 0; + val |= v_sync_polarity ? DP_FRAMER_SP_VSP : 0; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRAMER_SP, val); + if (ret) + goto err_config_video; + + val = (mode->hsync_start - mode->hdisplay) << 16; + val |= mode->htotal - mode->hsync_end; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_FRONT_BACK_PORCH, val); + if (ret) + goto err_config_video; + + val = mode->hdisplay * bit_per_pix / 8; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_BYTE_COUNT, val); + if (ret) + goto err_config_video; + + val = mode->htotal | ((mode->htotal - mode->hsync_start) << 16); + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_HORIZONTAL_0, val); + if (ret) + goto err_config_video; + + val = mode->hsync_end - mode->hsync_start; + val |= (mode->hdisplay << 16) | (h_sync_polarity << 15); + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_HORIZONTAL_1, val); + if (ret) + goto err_config_video; + + val = mode->vtotal; + val |= (mode->vtotal - mode->vsync_start) << 16; + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_VERTICAL_0, val); + if (ret) + goto err_config_video; + + val = mode->vsync_end - mode->vsync_start; + val |= (mode->vdisplay << 16) | (v_sync_polarity << 15); + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_VERTICAL_1, val); + if (ret) + goto err_config_video; + + val = cdns_dp_get_msa_misc(video); + ret = cdns_mhdp_reg_write(&mhdp->base, MSA_MISC, val); + if (ret) + goto err_config_video; + + ret = cdns_mhdp_reg_write(&mhdp->base, STREAM_CONFIG, 1); + if (ret) + goto err_config_video; + + val = mode->hsync_end - mode->hsync_start; + val |= mode->hdisplay << 16; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_HORIZONTAL, val); + if (ret) + goto err_config_video; + + val = mode->vdisplay; + val |= (mode->vtotal - mode->vsync_start) << 16; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VERTICAL_0, val); + if (ret) + goto err_config_video; + + val = mode->vtotal; + ret = cdns_mhdp_reg_write(&mhdp->base, DP_VERTICAL_1, val); + if (ret) + goto err_config_video; + + ret = cdns_mhdp_dp_reg_write_bit(&mhdp->base, DP_VB_ID, 2, 1, 0); + +err_config_video: + if (ret) + dev_err(mhdp->dev, "config video failed: %d\n", ret); + return ret; +} + +static void cdns_dp_pixel_clk_reset(struct cdns_mhdp8501_device *mhdp) +{ + u32 val; + + /* reset pixel clk */ + cdns_mhdp_reg_read(&mhdp->base, SOURCE_HDTX_CAR, &val); + cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, val & 0xFD); + cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, val); +} + +static int cdns_dp_set_video_status(struct cdns_mhdp8501_device *mhdp, int active) +{ + u8 msg; + int ret; + + msg = !!active; + + mutex_lock(&mhdp->mbox_mutex); + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, DPTX_SET_VIDEO, + sizeof(msg), &msg); + if (ret) + dev_err(mhdp->dev, "set video status failed: %d\n", ret); + + mutex_unlock(&mhdp->mbox_mutex); + + return ret; +} + +static int cdns_dp_training_start(struct cdns_mhdp8501_device *mhdp) +{ + unsigned long timeout; + u8 msg, event[2]; + int ret; + + msg = LINK_TRAINING_RUN; + + mutex_lock(&mhdp->mbox_mutex); + + /* start training */ + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_TRAINING_CONTROL, sizeof(msg), &msg); + if (ret) + goto err_training_start; + + timeout = jiffies + msecs_to_jiffies(LINK_TRAINING_TIMEOUT_MS); + while (time_before(jiffies, timeout)) { + msleep(LINK_TRAINING_RETRY_MS); + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_READ_EVENT, 0, NULL); + if (ret) + goto err_training_start; + + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_READ_EVENT, sizeof(event)); + if (ret) + goto err_training_start; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, event, sizeof(event)); + if (ret) + goto err_training_start; + + if (event[1] & CLK_RECOVERY_FAILED) { + dev_err(mhdp->dev, "clock recovery failed\n"); + } else if (event[1] & EQ_PHASE_FINISHED) { + mutex_unlock(&mhdp->mbox_mutex); + return 0; + } + } + + ret = -ETIMEDOUT; + +err_training_start: + mutex_unlock(&mhdp->mbox_mutex); + + dev_err(mhdp->dev, "training failed: %d\n", ret); + return ret; +} + +static int cdns_dp_get_training_status(struct cdns_mhdp8501_device *mhdp) +{ + u8 status[13]; + int ret; + + mutex_lock(&mhdp->mbox_mutex); + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_READ_LINK_STAT, 0, NULL); + if (ret) + goto err_get_training_status; + + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_READ_LINK_STAT, + sizeof(status)); + if (ret) + goto err_get_training_status; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, status, sizeof(status)); + if (ret) + goto err_get_training_status; + + mhdp->dp.rate = drm_dp_bw_code_to_link_rate(status[0]); + mhdp->dp.num_lanes = status[1]; + +err_get_training_status: + mutex_unlock(&mhdp->mbox_mutex); + + if (ret) + dev_err(mhdp->dev, "get training status failed: %d\n", ret); + return ret; +} + +static int cdns_dp_train_link(struct cdns_mhdp8501_device *mhdp) +{ + int ret; + + ret = cdns_dp_training_start(mhdp); + if (ret) { + dev_err(mhdp->dev, "Failed to start training %d\n", ret); + return ret; + } + + ret = cdns_dp_get_training_status(mhdp); + if (ret) { + dev_err(mhdp->dev, "Failed to get training stat %d\n", ret); + return ret; + } + + dev_dbg(mhdp->dev, "rate:0x%x, lanes:%d\n", mhdp->dp.rate, + mhdp->dp.num_lanes); + return ret; +} + +static int cdns_dp_set_host_cap(struct cdns_mhdp8501_device *mhdp) +{ + u8 msg[8]; + int ret; + + msg[0] = drm_dp_link_rate_to_bw_code(mhdp->dp.rate); + msg[1] = mhdp->dp.num_lanes | SCRAMBLER_EN; + msg[2] = VOLTAGE_LEVEL_2; + msg[3] = PRE_EMPHASIS_LEVEL_3; + msg[4] = PTS1 | PTS2 | PTS3 | PTS4; + msg[5] = FAST_LT_NOT_SUPPORT; + msg[6] = mhdp->lane_mapping; + msg[7] = ENHANCED; + + mutex_lock(&mhdp->mbox_mutex); + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_SET_HOST_CAPABILITIES, + sizeof(msg), msg); + + mutex_unlock(&mhdp->mbox_mutex); + + if (ret) + dev_err(mhdp->dev, "set host cap failed: %d\n", ret); + + return ret; +} + +static int cdns_dp_get_edid_block(void *data, u8 *edid, + unsigned int block, size_t length) +{ + struct cdns_mhdp8501_device *mhdp = data; + u8 msg[2], reg[2], i; + int ret; + + mutex_lock(&mhdp->mbox_mutex); + + for (i = 0; i < 4; i++) { + msg[0] = block / 2; + msg[1] = block % 2; + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_GET_EDID, sizeof(msg), msg); + if (ret) + continue; + + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_DP_TX, + DPTX_GET_EDID, + sizeof(reg) + length); + if (ret) + continue; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, sizeof(reg)); + if (ret) + continue; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, length); + if (ret) + continue; + + if (reg[0] == length && reg[1] == block / 2) + break; + } + + if (ret) + dev_err(mhdp->dev, "get block[%d] edid failed: %d\n", block, ret); + + mutex_unlock(&mhdp->mbox_mutex); + return ret; +} + +static void cdns_dp_mode_set(struct cdns_mhdp8501_device *mhdp) +{ + union phy_configure_opts phy_cfg; + int ret; + + cdns_dp_pixel_clk_reset(mhdp); + + /* Get DP Caps */ + ret = drm_dp_dpcd_read(&mhdp->dp.aux, DP_DPCD_REV, mhdp->dp.dpcd, + DP_RECEIVER_CAP_SIZE); + if (ret < 0) { + dev_err(mhdp->dev, "Failed to get caps %d\n", ret); + return; + } + + mhdp->dp.rate = drm_dp_max_link_rate(mhdp->dp.dpcd); + mhdp->dp.num_lanes = drm_dp_max_lane_count(mhdp->dp.dpcd); + + /* check the max link rate */ + if (mhdp->dp.rate > CDNS_DP_MAX_LINK_RATE) + mhdp->dp.rate = CDNS_DP_MAX_LINK_RATE; + + phy_cfg.dp.lanes = mhdp->dp.num_lanes; + phy_cfg.dp.link_rate = mhdp->dp.rate; + phy_cfg.dp.set_lanes = false; + phy_cfg.dp.set_rate = false; + phy_cfg.dp.set_voltages = true; + + /* Mailbox protect for DP PHY access */ + mutex_lock(&mhdp->mbox_mutex); + ret = phy_configure(mhdp->phy, &phy_cfg); + mutex_unlock(&mhdp->mbox_mutex); + if (ret) { + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", + __func__, ret); + return; + } + + /* Video off */ + ret = cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_IDLE); + if (ret) { + dev_err(mhdp->dev, "Failed to valid video %d\n", ret); + return; + } + + /* Line swapping */ + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping); + + /* Set DP host capability */ + ret = cdns_dp_set_host_cap(mhdp); + if (ret) { + dev_err(mhdp->dev, "Failed to set host cap %d\n", ret); + return; + } + + ret = cdns_mhdp_reg_write(&mhdp->base, DP_AUX_SWAP_INVERSION_CONTROL, + AUX_HOST_INVERT); + if (ret) { + dev_err(mhdp->dev, "Failed to set host invert %d\n", ret); + return; + } + + ret = cdns_dp_config_video(mhdp); + if (ret) + dev_err(mhdp->dev, "Failed to config video %d\n", ret); +} + +static int cdns_dp_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { + dev_err(mhdp->dev, "do not support creating a drm_connector\n"); + return -EINVAL; + } + + mhdp->dp.aux.drm_dev = bridge->dev; + + return drm_dp_aux_register(&mhdp->dp.aux); +} + +static enum drm_mode_status +cdns_dp_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + enum drm_mode_status mode_status = MODE_OK; + + /* We don't support double-clocked modes */ + if (mode->flags & DRM_MODE_FLAG_DBLCLK || + mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_BAD; + + /* MAX support pixel clock rate 594MHz */ + if (mode->clock > 594000) + return MODE_CLOCK_HIGH; + + if (mode->hdisplay > 3840) + return MODE_BAD_HVALUE; + + if (mode->vdisplay > 2160) + return MODE_BAD_VVALUE; + + return mode_status; +} + +static enum drm_connector_status +cdns_dp_bridge_detect(struct drm_bridge *bridge) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + return cdns_mhdp8501_detect(mhdp); +} + +static const struct drm_edid +*cdns_dp_bridge_edid_read(struct drm_bridge *bridge, + struct drm_connector *connector) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + return drm_edid_read_custom(connector, cdns_dp_get_edid_block, mhdp); +} + +static void cdns_dp_bridge_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_state) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_IDLE); + mhdp->curr_conn = NULL; + + /* Mailbox protect for DP PHY access */ + mutex_lock(&mhdp->mbox_mutex); + phy_power_off(mhdp->phy); + mutex_unlock(&mhdp->mbox_mutex); +} + +static void cdns_dp_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_state) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + struct drm_atomic_state *state = old_state->base.state; + struct drm_connector *connector; + struct video_info *video = &mhdp->video_info; + struct drm_crtc_state *crtc_state; + struct drm_connector_state *conn_state; + const struct drm_display_mode *mode; + int ret; + + connector = drm_atomic_get_new_connector_for_encoder(state, + bridge->encoder); + if (WARN_ON(!connector)) + return; + + mhdp->curr_conn = connector; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (WARN_ON(!conn_state)) + return; + + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); + if (WARN_ON(!crtc_state)) + return; + + mode = &crtc_state->adjusted_mode; + + switch (connector->display_info.bpc) { + case 10: + video->bpc = 10; + break; + case 6: + video->bpc = 6; + break; + default: + video->bpc = 8; + break; + } + + /* The only currently supported format */ + video->color_fmt = DRM_COLOR_FORMAT_RGB444; + + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", + mode->hdisplay, mode->vdisplay, mode->clock); + memcpy(&mhdp->mode, mode, sizeof(struct drm_display_mode)); + + cdns_dp_mode_set(mhdp); + + /* Link trainning */ + ret = cdns_dp_train_link(mhdp); + if (ret) { + dev_err(mhdp->dev, "Failed link train %d\n", ret); + return; + } + + ret = cdns_dp_set_video_status(mhdp, CONTROL_VIDEO_VALID); + if (ret) { + dev_err(mhdp->dev, "Failed to valid video %d\n", ret); + return; + } +} + +const struct drm_bridge_funcs cdns_dp_bridge_funcs = { + .attach = cdns_dp_bridge_attach, + .detect = cdns_dp_bridge_detect, + .edid_read = cdns_dp_bridge_edid_read, + .mode_valid = cdns_dp_bridge_mode_valid, + .atomic_enable = cdns_dp_bridge_atomic_enable, + .atomic_disable = cdns_dp_bridge_atomic_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, +}; diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c new file mode 100644 index 000000000000..834ca9788a5f --- /dev/null +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cadence MHDP8501 HDMI bridge driver + * + * Copyright (C) 2019-2024 NXP Semiconductor, Inc. + * + */ +#include <drm/display/drm_hdmi_helper.h> +#include <drm/display/drm_hdmi_state_helper.h> +#include <drm/display/drm_scdc_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_print.h> +#include <linux/phy/phy.h> +#include <linux/phy/phy-hdmi.h> + +#include "cdns-mhdp8501-core.h" + +/** + * cdns_hdmi_config_infoframe() - fill the HDMI infoframe + * @mhdp: phandle to mhdp device. + * @entry_id: The packet memory address in which the data is written. + * @len: length of infoframe. + * @buf: point to InfoFrame Packet. + * @type: Packet Type of InfoFrame in HDMI Specification. + * + */ +static void cdns_hdmi_config_infoframe(struct cdns_mhdp8501_device *mhdp, + u8 entry_id, u8 len, + const u8 *buf, u8 type) +{ + u8 packet[32], packet_len = 32; + u32 packet32, len32; + u32 val, i; + + /* + * only support 32 bytes now + * packet[0] = 0 + * packet[1-3] = HB[0-2] InfoFrame Packet Header + * packet[4-31 = PB[0-27] InfoFrame Packet Contents + */ + if (len >= (packet_len - 1)) + return; + packet[0] = 0; + memcpy(packet + 1, buf, len); + + /* invalidate entry */ + val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id); + writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG); + writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + SOURCE_PIF_PKT_ALLOC_WR_EN); + + /* flush fifo 1 */ + writel(F_FIFO1_FLUSH(1), mhdp->regs + SOURCE_PIF_FIFO1_FLUSH); + + /* write packet into memory */ + len32 = packet_len / 4; + for (i = 0; i < len32; i++) { + packet32 = get_unaligned_le32(packet + 4 * i); + writel(F_DATA_WR(packet32), mhdp->regs + SOURCE_PIF_DATA_WR); + } + + /* write entry id */ + writel(F_WR_ADDR(entry_id), mhdp->regs + SOURCE_PIF_WR_ADDR); + + /* write request */ + writel(F_HOST_WR(1), mhdp->regs + SOURCE_PIF_WR_REQ); + + /* update entry */ + val = F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) | + F_PACKET_TYPE(type) | F_PKT_ALLOC_ADDRESS(entry_id); + writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG); + + writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + SOURCE_PIF_PKT_ALLOC_WR_EN); +} + +static int cdns_hdmi_get_edid_block(void *data, u8 *edid, + u32 block, size_t length) +{ + struct cdns_mhdp8501_device *mhdp = data; + u8 msg[2], reg[5], i; + int ret; + + mutex_lock(&mhdp->mbox_mutex); + + for (i = 0; i < 4; i++) { + msg[0] = block / 2; + msg[1] = block % 2; + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_HDMI_TX, HDMI_TX_EDID, + sizeof(msg), msg); + if (ret) + continue; + + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_HDMI_TX, + HDMI_TX_EDID, sizeof(reg) + length); + if (ret) + continue; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, sizeof(reg)); + if (ret) + continue; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, length); + if (ret) + continue; + + if ((reg[3] << 8 | reg[4]) == length) + break; + } + + mutex_unlock(&mhdp->mbox_mutex); + + if (ret) + dev_err(mhdp->dev, "get block[%d] edid failed: %d\n", block, ret); + return ret; +} + +static int cdns_hdmi_scdc_write(struct cdns_mhdp8501_device *mhdp, u8 addr, u8 value) +{ + u8 msg[5], reg[5]; + int ret; + + msg[0] = 0x54; + msg[1] = addr; + msg[2] = 0; + msg[3] = 1; + msg[4] = value; + + mutex_lock(&mhdp->mbox_mutex); + + ret = cdns_mhdp_mailbox_send(&mhdp->base, MB_MODULE_ID_HDMI_TX, HDMI_TX_WRITE, + sizeof(msg), msg); + if (ret) + goto err_scdc_write; + + ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, MB_MODULE_ID_HDMI_TX, + HDMI_TX_WRITE, sizeof(reg)); + if (ret) + goto err_scdc_write; + + ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, sizeof(reg)); + if (ret) + goto err_scdc_write; + + if (reg[0] != 0) + ret = -EINVAL; + +err_scdc_write: + + mutex_unlock(&mhdp->mbox_mutex); + + if (ret) + dev_err(mhdp->dev, "scdc write failed: %d\n", ret); + return ret; +} + +static int cdns_hdmi_ctrl_init(struct cdns_mhdp8501_device *mhdp) +{ + unsigned long long char_rate = mhdp->hdmi.char_rate; + u32 protocol = mhdp->hdmi.hdmi_type; + u32 reg0, reg1, val; + int ret; + + /* Set PHY to HDMI data */ + ret = cdns_mhdp_reg_write(&mhdp->base, PHY_DATA_SEL, F_SOURCE_PHY_MHDP_SEL(1)); + if (ret < 0) + return ret; + + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_HPD, + F_HPD_VALID_WIDTH(4) | F_HPD_GLITCH_WIDTH(0)); + if (ret < 0) + return ret; + + /* open CARS */ + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_PHY_CAR, 0xF); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_HDTX_CAR, 0xFF); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_PKT_CAR, 0xF); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_AIF_CAR, 0xF); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CIPHER_CAR, 0xF); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CRYPTO_CAR, 0xF); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, SOURCE_CEC_CAR, 3); + if (ret < 0) + return ret; + + reg0 = 0x7c1f; + reg1 = 0x7c1f; + if (protocol == MODE_HDMI_2_0 && char_rate >= 340000000) { + reg0 = 0; + reg1 = 0xFFFFF; + } + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CLOCK_REG_0, reg0); + if (ret < 0) + return ret; + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CLOCK_REG_1, reg1); + if (ret < 0) + return ret; + + /* set HDMI mode and preemble mode data enable */ + val = F_HDMI_MODE(protocol) | F_HDMI2_PREAMBLE_EN(1) | + F_DATA_EN(1) | F_HDMI2_CTRL_IL_MODE(1) | F_BCH_EN(1) | + F_PIC_3D(0XF) | F_CLEAR_AVMUTE(1); + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); + + return ret; +} + +static int cdns_hdmi_mode_config(struct cdns_mhdp8501_device *mhdp, + struct drm_display_mode *mode, + struct video_info *video_info) +{ + u32 vsync_lines = mode->vsync_end - mode->vsync_start; + u32 eof_lines = mode->vsync_start - mode->vdisplay; + u32 sof_lines = mode->vtotal - mode->vsync_end; + u32 hblank = mode->htotal - mode->hdisplay; + u32 hactive = mode->hdisplay; + u32 vblank = mode->vtotal - mode->vdisplay; + u32 vactive = mode->vdisplay; + u32 hfront = mode->hsync_start - mode->hdisplay; + u32 hback = mode->htotal - mode->hsync_end; + u32 vfront = eof_lines; + u32 hsync = hblank - hfront - hback; + u32 vsync = vsync_lines; + u32 vback = sof_lines; + u32 v_h_polarity = ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1) + + ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : 2); + int ret; + u32 val; + + ret = cdns_mhdp_reg_write(&mhdp->base, SCHEDULER_H_SIZE, (hactive << 16) + hblank); + if (ret < 0) + return ret; + + ret = cdns_mhdp_reg_write(&mhdp->base, SCHEDULER_V_SIZE, (vactive << 16) + vblank); + if (ret < 0) + return ret; + + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_SIGNAL_FRONT_WIDTH, (vfront << 16) + hfront); + if (ret < 0) + return ret; + + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_SIGNAL_SYNC_WIDTH, (vsync << 16) + hsync); + if (ret < 0) + return ret; + + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_SIGNAL_BACK_WIDTH, (vback << 16) + hback); + if (ret < 0) + return ret; + + ret = cdns_mhdp_reg_write(&mhdp->base, HSYNC2VSYNC_POL_CTRL, v_h_polarity); + if (ret < 0) + return ret; + + /* Reset Data Enable */ + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); + val &= ~F_DATA_EN(1); + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); + if (ret < 0) + return ret; + + /* Set bpc */ + val &= ~F_VIF_DATA_WIDTH(3); + switch (video_info->bpc) { + case 10: + val |= F_VIF_DATA_WIDTH(1); + break; + case 12: + val |= F_VIF_DATA_WIDTH(2); + break; + case 16: + val |= F_VIF_DATA_WIDTH(3); + break; + case 8: + default: + val |= F_VIF_DATA_WIDTH(0); + break; + } + + /* select color encoding */ + val &= ~F_HDMI_ENCODING(3); + switch (video_info->color_fmt) { + case HDMI_COLORSPACE_YUV444: + val |= F_HDMI_ENCODING(2); + break; + case HDMI_COLORSPACE_YUV422: + val |= F_HDMI_ENCODING(1); + break; + case HDMI_COLORSPACE_YUV420: + val |= F_HDMI_ENCODING(3); + break; + case HDMI_COLORSPACE_RGB: + default: + val |= F_HDMI_ENCODING(0); + break; + } + + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); + if (ret < 0) + return ret; + + /* set data enable */ + val |= F_DATA_EN(1); + ret = cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); + + return ret; +} + +static int cdns_hdmi_disable_gcp(struct cdns_mhdp8501_device *mhdp) +{ + u32 val; + + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); + val &= ~F_GCP_EN(1); + + return cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); +} + +static int cdns_hdmi_enable_gcp(struct cdns_mhdp8501_device *mhdp) +{ + u32 val; + + cdns_mhdp_reg_read(&mhdp->base, HDTX_CONTROLLER, &val); + val |= F_GCP_EN(1); + + return cdns_mhdp_reg_write(&mhdp->base, HDTX_CONTROLLER, val); +} + +static void cdns_hdmi_sink_config(struct cdns_mhdp8501_device *mhdp) +{ + struct drm_scdc *scdc = &mhdp->curr_conn->display_info.hdmi.scdc; + u8 buff = 0; + + /* Default work in HDMI1.4 */ + mhdp->hdmi.hdmi_type = MODE_HDMI_1_4; + + /* check sink support SCDC or not */ + if (!scdc->supported) { + dev_info(mhdp->dev, "Sink Not Support SCDC\n"); + return; + } + + if (mhdp->hdmi.char_rate > 340000000) { + /* + * TMDS Character Rate above 340MHz should working in HDMI2.0 + * Enable scrambling and TMDS_Bit_Clock_Ratio + */ + buff = SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 | SCDC_SCRAMBLING_ENABLE; + mhdp->hdmi.hdmi_type = MODE_HDMI_2_0; + } else if (scdc->scrambling.low_rates) { + /* + * Enable scrambling and HDMI2.0 when scrambling capability of sink + * be indicated in the HF-VSDB LTE_340Mcsc_scramble bit + */ + buff = SCDC_SCRAMBLING_ENABLE; + mhdp->hdmi.hdmi_type = MODE_HDMI_2_0; + } + + /* TMDS config */ + cdns_hdmi_scdc_write(mhdp, SCDC_TMDS_CONFIG, buff); +} + +static int cdns_hdmi_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { + dev_err(mhdp->dev, "do not support creating a drm_connector\n"); + return -EINVAL; + } + + return 0; +} + +static enum drm_mode_status +cdns_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, + const struct drm_display_mode *mode, + unsigned long long tmds_rate) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + union phy_configure_opts phy_cfg; + int ret; + + phy_cfg.hdmi.tmds_char_rate = tmds_rate; + + /* Mailbox protect for HDMI PHY access */ + mutex_lock(&mhdp->mbox_mutex); + ret = phy_validate(mhdp->phy, PHY_MODE_HDMI, 0, &phy_cfg); + mutex_unlock(&mhdp->mbox_mutex); + if (ret < 0) + return MODE_CLOCK_RANGE; + + return MODE_OK; +} + +static enum drm_mode_status +cdns_hdmi_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + unsigned long long tmds_rate; + + /* We don't support double-clocked and Interlaced modes */ + if (mode->flags & DRM_MODE_FLAG_DBLCLK || + mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_BAD; + + /* MAX support pixel clock rate 594MHz */ + if (mode->clock > 594000) + return MODE_CLOCK_HIGH; + + if (mode->hdisplay > 3840) + return MODE_BAD_HVALUE; + + if (mode->vdisplay > 2160) + return MODE_BAD_VVALUE; + + tmds_rate = mode->clock * 1000ULL; + return cdns_hdmi_tmds_char_rate_valid(bridge, mode, tmds_rate); +} + +static enum drm_connector_status +cdns_hdmi_bridge_detect(struct drm_bridge *bridge) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + return cdns_mhdp8501_detect(mhdp); +} + +static const struct drm_edid +*cdns_hdmi_bridge_edid_read(struct drm_bridge *bridge, + struct drm_connector *connector) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + return drm_edid_read_custom(connector, cdns_hdmi_get_edid_block, mhdp); +} + +static void cdns_hdmi_bridge_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_state) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + mhdp->curr_conn = NULL; + + /* Mailbox protect for HDMI PHY access */ + mutex_lock(&mhdp->mbox_mutex); + phy_power_off(mhdp->phy); + mutex_unlock(&mhdp->mbox_mutex); +} + +static void cdns_hdmi_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_state) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + struct drm_atomic_state *state = old_state->base.state; + struct drm_connector *connector; + struct video_info *video = &mhdp->video_info; + struct drm_crtc_state *crtc_state; + struct drm_connector_state *conn_state; + struct drm_display_mode *mode = &mhdp->mode; + union phy_configure_opts phy_cfg; + int ret; + + connector = drm_atomic_get_new_connector_for_encoder(state, + bridge->encoder); + if (WARN_ON(!connector)) + return; + + mhdp->curr_conn = connector; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (WARN_ON(!conn_state)) + return; + + crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); + if (WARN_ON(!crtc_state)) + return; + + video->color_fmt = conn_state->hdmi.output_format; + video->bpc = conn_state->hdmi.output_bpc; + + drm_mode_copy(&mhdp->mode, &crtc_state->adjusted_mode); + + /* video mode check */ + if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == 0) + return; + + dev_dbg(mhdp->dev, "Mode: %dx%dp%d\n", + mode->hdisplay, mode->vdisplay, mode->clock); + + drm_atomic_helper_connector_hdmi_update_infoframes(connector, state); + + /* Line swapping */ + cdns_mhdp_reg_write(&mhdp->base, LANES_CONFIG, 0x00400000 | mhdp->lane_mapping); + + mhdp->hdmi.char_rate = drm_hdmi_compute_mode_clock(mode, + mhdp->video_info.bpc, + mhdp->video_info.color_fmt); + phy_cfg.hdmi.tmds_char_rate = mhdp->hdmi.char_rate; + + /* Mailbox protect for HDMI PHY access */ + mutex_lock(&mhdp->mbox_mutex); + ret = phy_configure(mhdp->phy, &phy_cfg); + mutex_unlock(&mhdp->mbox_mutex); + if (ret) { + dev_err(mhdp->dev, "%s: phy_configure() failed: %d\n", + __func__, ret); + return; + } + + cdns_hdmi_sink_config(mhdp); + + ret = cdns_hdmi_ctrl_init(mhdp); + if (ret < 0) { + dev_err(mhdp->dev, "%s, ret = %d\n", __func__, ret); + return; + } + + /* Config GCP */ + if (mhdp->video_info.bpc == 8) + cdns_hdmi_disable_gcp(mhdp); + else + cdns_hdmi_enable_gcp(mhdp); + + ret = cdns_hdmi_mode_config(mhdp, mode, &mhdp->video_info); + if (ret < 0) { + dev_err(mhdp->dev, "CDN_API_HDMITX_SetVic_blocking ret = %d\n", ret); + return; + } +} + +static int cdns_hdmi_bridge_clear_infoframe(struct drm_bridge *bridge, + enum hdmi_infoframe_type type) +{ + return 0; +} + +static int cdns_hdmi_bridge_write_infoframe(struct drm_bridge *bridge, + enum hdmi_infoframe_type type, + const u8 *buffer, size_t len) +{ + struct cdns_mhdp8501_device *mhdp = bridge->driver_private; + + switch (type) { + case HDMI_INFOFRAME_TYPE_AVI: + cdns_hdmi_config_infoframe(mhdp, 0, len, buffer, HDMI_INFOFRAME_TYPE_AVI); + break; + case HDMI_INFOFRAME_TYPE_SPD: + cdns_hdmi_config_infoframe(mhdp, 1, len, buffer, HDMI_INFOFRAME_TYPE_SPD); + break; + case HDMI_INFOFRAME_TYPE_VENDOR: + cdns_hdmi_config_infoframe(mhdp, 2, len, buffer, HDMI_INFOFRAME_TYPE_VENDOR); + break; + default: + dev_dbg(mhdp->dev, "Unsupported infoframe type %x\n", type); + } + + return 0; +} + +static int cdns_hdmi_bridge_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + return drm_atomic_helper_connector_hdmi_check(conn_state->connector, conn_state->state); +} + +const struct drm_bridge_funcs cdns_hdmi_bridge_funcs = { + .attach = cdns_hdmi_bridge_attach, + .detect = cdns_hdmi_bridge_detect, + .edid_read = cdns_hdmi_bridge_edid_read, + .mode_valid = cdns_hdmi_bridge_mode_valid, + .atomic_enable = cdns_hdmi_bridge_atomic_enable, + .atomic_disable = cdns_hdmi_bridge_atomic_disable, + .atomic_check = cdns_hdmi_bridge_atomic_check, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .hdmi_clear_infoframe = cdns_hdmi_bridge_clear_infoframe, + .hdmi_write_infoframe = cdns_hdmi_bridge_write_infoframe, + .hdmi_tmds_char_rate_valid = cdns_hdmi_tmds_char_rate_valid, +};