diff mbox series

[v2,2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings

Message ID 20240913103755.7290-3-quic_mukhopad@quicinc.com
State Superseded
Headers show
Series Add support for DisplayPort on SA8775P platform | expand

Commit Message

Soutrik Mukhopadhyay Sept. 13, 2024, 10:37 a.m. UTC
In order to support different HW versions, introduce aux_cfg array
to move v4 specific aux configuration settings.

Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
---
v2: Fixed review comments from Bjorn and Dmitry
	- Made aux_cfg array as const.

---
 drivers/phy/qualcomm/phy-qcom-edp.c | 37 ++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 14 deletions(-)

Comments

Dmitry Baryshkov Sept. 13, 2024, 11:42 a.m. UTC | #1
On Fri, 13 Sept 2024 at 13:38, Soutrik Mukhopadhyay
<quic_mukhopad@quicinc.com> wrote:
>
> In order to support different HW versions, introduce aux_cfg array
> to move v4 specific aux configuration settings.
>
> Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
> ---
> v2: Fixed review comments from Bjorn and Dmitry
>         - Made aux_cfg array as const.
>
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c | 37 ++++++++++++++++++-----------
>  1 file changed, 23 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index da2b32fb5b45..bcd5aced9e06 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -90,6 +90,7 @@ struct phy_ver_ops {
>
>  struct qcom_edp_phy_cfg {
>         bool is_edp;
> +       const u8 *aux_cfg;
>         const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
>         const struct phy_ver_ops *ver_ops;
>  };
> @@ -186,11 +187,15 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
>         .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
>  };
>
> +static const u8 edp_phy_aux_cfg_v4[10] = {
> +       0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
> +};
> +
>  static int qcom_edp_phy_init(struct phy *phy)
>  {
>         struct qcom_edp *edp = phy_get_drvdata(phy);
> +       u8 aux_cfg[10];

Please define 10, so that there are no magic numbers (and less chance
of damaging the stack if it gets changed in one place only.

>         int ret;
> -       u8 cfg8;
>
>         ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
>         if (ret)
> @@ -200,6 +205,8 @@ static int qcom_edp_phy_init(struct phy *phy)
>         if (ret)
>                 goto out_disable_supplies;
>
> +       memcpy(aux_cfg, edp->cfg->aux_cfg, sizeof(aux_cfg));
> +
>         writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
>                DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
>                edp->edp + DP_PHY_PD_CTL);
> @@ -222,22 +229,20 @@ static int qcom_edp_phy_init(struct phy *phy)
>          * even needed.
>          */
>         if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
> -               cfg8 = 0xb7;
> -       else
> -               cfg8 = 0x37;
> +               aux_cfg[8] = 0xb7;
>
>         writel(0xfc, edp->edp + DP_PHY_MODE);
>
> -       writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
> -       writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
> -       writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
> -       writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
> -       writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
> -       writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
> -       writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
> -       writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
> -       writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
> -       writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
> +       writel(aux_cfg[0], edp->edp + DP_PHY_AUX_CFG0);
> +       writel(aux_cfg[1], edp->edp + DP_PHY_AUX_CFG1);
> +       writel(aux_cfg[2], edp->edp + DP_PHY_AUX_CFG2);
> +       writel(aux_cfg[3], edp->edp + DP_PHY_AUX_CFG3);
> +       writel(aux_cfg[4], edp->edp + DP_PHY_AUX_CFG4);
> +       writel(aux_cfg[5], edp->edp + DP_PHY_AUX_CFG5);
> +       writel(aux_cfg[6], edp->edp + DP_PHY_AUX_CFG6);
> +       writel(aux_cfg[7], edp->edp + DP_PHY_AUX_CFG7);
> +       writel(aux_cfg[8], edp->edp + DP_PHY_AUX_CFG8);
> +       writel(aux_cfg[9], edp->edp + DP_PHY_AUX_CFG9);

Replace this with a loop?

>
>         writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
>                PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> @@ -519,16 +524,19 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
>  };
>
>  static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
> +       .aux_cfg = edp_phy_aux_cfg_v4,
>         .ver_ops = &qcom_edp_phy_ops_v4,
>  };
>
>  static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
> +       .aux_cfg = edp_phy_aux_cfg_v4,
>         .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
>         .ver_ops = &qcom_edp_phy_ops_v4,
>  };
>
>  static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
>         .is_edp = true,
> +       .aux_cfg = edp_phy_aux_cfg_v4,
>         .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
>         .ver_ops = &qcom_edp_phy_ops_v4,
>  };
> @@ -707,6 +715,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
>  };
>
>  static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
> +       .aux_cfg = edp_phy_aux_cfg_v4,
>         .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
>         .ver_ops = &qcom_edp_phy_ops_v6,
>  };
> --
> 2.17.1
>
Konrad Dybcio Sept. 14, 2024, 11:29 a.m. UTC | #2
On 13.09.2024 12:37 PM, Soutrik Mukhopadhyay wrote:
> In order to support different HW versions, introduce aux_cfg array
> to move v4 specific aux configuration settings.
> 
> Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
> ---
> v2: Fixed review comments from Bjorn and Dmitry
> 	- Made aux_cfg array as const.
> 
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c | 37 ++++++++++++++++++-----------
>  1 file changed, 23 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index da2b32fb5b45..bcd5aced9e06 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -90,6 +90,7 @@ struct phy_ver_ops {
>  
>  struct qcom_edp_phy_cfg {
>  	bool is_edp;
> +	const u8 *aux_cfg;
>  	const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
>  	const struct phy_ver_ops *ver_ops;
>  };
> @@ -186,11 +187,15 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
>  	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
>  };
>  
> +static const u8 edp_phy_aux_cfg_v4[10] = {
> +	0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
> +};

How about we only abstract the values that differ? It would seem like more
platforms reuse about half of these magic bytes

Konrad
Dmitry Baryshkov Sept. 14, 2024, 12:04 p.m. UTC | #3
On Sat, 14 Sept 2024 at 14:29, Konrad Dybcio <konradybcio@kernel.org> wrote:
>
> On 13.09.2024 12:37 PM, Soutrik Mukhopadhyay wrote:
> > In order to support different HW versions, introduce aux_cfg array
> > to move v4 specific aux configuration settings.
> >
> > Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
> > ---
> > v2: Fixed review comments from Bjorn and Dmitry
> >       - Made aux_cfg array as const.
> >
> > ---
> >  drivers/phy/qualcomm/phy-qcom-edp.c | 37 ++++++++++++++++++-----------
> >  1 file changed, 23 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> > index da2b32fb5b45..bcd5aced9e06 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> > @@ -90,6 +90,7 @@ struct phy_ver_ops {
> >
> >  struct qcom_edp_phy_cfg {
> >       bool is_edp;
> > +     const u8 *aux_cfg;
> >       const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
> >       const struct phy_ver_ops *ver_ops;
> >  };
> > @@ -186,11 +187,15 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
> >       .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
> >  };
> >
> > +static const u8 edp_phy_aux_cfg_v4[10] = {
> > +     0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
> > +};
>
> How about we only abstract the values that differ? It would seem like more
> platforms reuse about half of these magic bytes

I think it's easier to review and compare the whole sequence rather
than numbers here and then numbers there.
Soutrik Mukhopadhyay Sept. 17, 2024, 8:40 a.m. UTC | #4
On 9/13/2024 5:12 PM, Dmitry Baryshkov wrote:
> On Fri, 13 Sept 2024 at 13:38, Soutrik Mukhopadhyay
> <quic_mukhopad@quicinc.com> wrote:
>> In order to support different HW versions, introduce aux_cfg array
>> to move v4 specific aux configuration settings.
>>
>> Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
>> ---
>> v2: Fixed review comments from Bjorn and Dmitry
>>          - Made aux_cfg array as const.
>>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-edp.c | 37 ++++++++++++++++++-----------
>>   1 file changed, 23 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
>> index da2b32fb5b45..bcd5aced9e06 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
>> @@ -90,6 +90,7 @@ struct phy_ver_ops {
>>
>>   struct qcom_edp_phy_cfg {
>>          bool is_edp;
>> +       const u8 *aux_cfg;
>>          const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
>>          const struct phy_ver_ops *ver_ops;
>>   };
>> @@ -186,11 +187,15 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
>>          .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
>>   };
>>
>> +static const u8 edp_phy_aux_cfg_v4[10] = {
>> +       0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
>> +};
>> +
>>   static int qcom_edp_phy_init(struct phy *phy)
>>   {
>>          struct qcom_edp *edp = phy_get_drvdata(phy);
>> +       u8 aux_cfg[10];
> Please define 10, so that there are no magic numbers (and less chance
> of damaging the stack if it gets changed in one place only.


Sure, we will update this in the next version.


>
>>          int ret;
>> -       u8 cfg8;
>>
>>          ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
>>          if (ret)
>> @@ -200,6 +205,8 @@ static int qcom_edp_phy_init(struct phy *phy)
>>          if (ret)
>>                  goto out_disable_supplies;
>>
>> +       memcpy(aux_cfg, edp->cfg->aux_cfg, sizeof(aux_cfg));
>> +
>>          writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
>>                 DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
>>                 edp->edp + DP_PHY_PD_CTL);
>> @@ -222,22 +229,20 @@ static int qcom_edp_phy_init(struct phy *phy)
>>           * even needed.
>>           */
>>          if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
>> -               cfg8 = 0xb7;
>> -       else
>> -               cfg8 = 0x37;
>> +               aux_cfg[8] = 0xb7;
>>
>>          writel(0xfc, edp->edp + DP_PHY_MODE);
>>
>> -       writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
>> -       writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
>> -       writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
>> -       writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
>> -       writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
>> -       writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
>> -       writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
>> -       writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
>> -       writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
>> -       writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
>> +       writel(aux_cfg[0], edp->edp + DP_PHY_AUX_CFG0);
>> +       writel(aux_cfg[1], edp->edp + DP_PHY_AUX_CFG1);
>> +       writel(aux_cfg[2], edp->edp + DP_PHY_AUX_CFG2);
>> +       writel(aux_cfg[3], edp->edp + DP_PHY_AUX_CFG3);
>> +       writel(aux_cfg[4], edp->edp + DP_PHY_AUX_CFG4);
>> +       writel(aux_cfg[5], edp->edp + DP_PHY_AUX_CFG5);
>> +       writel(aux_cfg[6], edp->edp + DP_PHY_AUX_CFG6);
>> +       writel(aux_cfg[7], edp->edp + DP_PHY_AUX_CFG7);
>> +       writel(aux_cfg[8], edp->edp + DP_PHY_AUX_CFG8);
>> +       writel(aux_cfg[9], edp->edp + DP_PHY_AUX_CFG9);
> Replace this with a loop?


Can we use below approach for this :

#define DP_PHY_AUX_CFG(n)        (0x24 + (0x04 * (n)))

for (int i = 0; i < 10; i++)

     writel(aux_cfg[i], edp->edp + DP_PHY_AUX_CFG(i));


>
>>          writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
>>                 PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
>> @@ -519,16 +524,19 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
>>   };
>>
>>   static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
>> +       .aux_cfg = edp_phy_aux_cfg_v4,
>>          .ver_ops = &qcom_edp_phy_ops_v4,
>>   };
>>
>>   static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
>> +       .aux_cfg = edp_phy_aux_cfg_v4,
>>          .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
>>          .ver_ops = &qcom_edp_phy_ops_v4,
>>   };
>>
>>   static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
>>          .is_edp = true,
>> +       .aux_cfg = edp_phy_aux_cfg_v4,
>>          .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
>>          .ver_ops = &qcom_edp_phy_ops_v4,
>>   };
>> @@ -707,6 +715,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
>>   };
>>
>>   static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
>> +       .aux_cfg = edp_phy_aux_cfg_v4,
>>          .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
>>          .ver_ops = &qcom_edp_phy_ops_v6,
>>   };
>> --
>> 2.17.1
>>
>
Dmitry Baryshkov Sept. 17, 2024, 9:41 a.m. UTC | #5
On Tue, 17 Sept 2024 at 10:40, Soutrik Mukhopadhyay
<quic_mukhopad@quicinc.com> wrote:
>
>
> On 9/13/2024 5:12 PM, Dmitry Baryshkov wrote:
> > On Fri, 13 Sept 2024 at 13:38, Soutrik Mukhopadhyay
> > <quic_mukhopad@quicinc.com> wrote:
> >> In order to support different HW versions, introduce aux_cfg array
> >> to move v4 specific aux configuration settings.
> >>
> >> Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
> >> ---
> >> v2: Fixed review comments from Bjorn and Dmitry
> >>          - Made aux_cfg array as const.
> >>
> >> ---
> >>   drivers/phy/qualcomm/phy-qcom-edp.c | 37 ++++++++++++++++++-----------
> >>   1 file changed, 23 insertions(+), 14 deletions(-)
> >>
> >> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> >> index da2b32fb5b45..bcd5aced9e06 100644
> >> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> >> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> >> @@ -90,6 +90,7 @@ struct phy_ver_ops {
> >>
> >>   struct qcom_edp_phy_cfg {
> >>          bool is_edp;
> >> +       const u8 *aux_cfg;
> >>          const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
> >>          const struct phy_ver_ops *ver_ops;
> >>   };
> >> @@ -186,11 +187,15 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
> >>          .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
> >>   };
> >>
> >> +static const u8 edp_phy_aux_cfg_v4[10] = {
> >> +       0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
> >> +};
> >> +
> >>   static int qcom_edp_phy_init(struct phy *phy)
> >>   {
> >>          struct qcom_edp *edp = phy_get_drvdata(phy);
> >> +       u8 aux_cfg[10];
> > Please define 10, so that there are no magic numbers (and less chance
> > of damaging the stack if it gets changed in one place only.
>
>
> Sure, we will update this in the next version.
>
>
> >
> >>          int ret;
> >> -       u8 cfg8;
> >>
> >>          ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
> >>          if (ret)
> >> @@ -200,6 +205,8 @@ static int qcom_edp_phy_init(struct phy *phy)
> >>          if (ret)
> >>                  goto out_disable_supplies;
> >>
> >> +       memcpy(aux_cfg, edp->cfg->aux_cfg, sizeof(aux_cfg));
> >> +
> >>          writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> >>                 DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> >>                 edp->edp + DP_PHY_PD_CTL);
> >> @@ -222,22 +229,20 @@ static int qcom_edp_phy_init(struct phy *phy)
> >>           * even needed.
> >>           */
> >>          if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
> >> -               cfg8 = 0xb7;
> >> -       else
> >> -               cfg8 = 0x37;
> >> +               aux_cfg[8] = 0xb7;
> >>
> >>          writel(0xfc, edp->edp + DP_PHY_MODE);
> >>
> >> -       writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
> >> -       writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
> >> -       writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
> >> -       writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
> >> -       writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
> >> -       writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
> >> -       writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
> >> -       writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
> >> -       writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
> >> -       writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
> >> +       writel(aux_cfg[0], edp->edp + DP_PHY_AUX_CFG0);
> >> +       writel(aux_cfg[1], edp->edp + DP_PHY_AUX_CFG1);
> >> +       writel(aux_cfg[2], edp->edp + DP_PHY_AUX_CFG2);
> >> +       writel(aux_cfg[3], edp->edp + DP_PHY_AUX_CFG3);
> >> +       writel(aux_cfg[4], edp->edp + DP_PHY_AUX_CFG4);
> >> +       writel(aux_cfg[5], edp->edp + DP_PHY_AUX_CFG5);
> >> +       writel(aux_cfg[6], edp->edp + DP_PHY_AUX_CFG6);
> >> +       writel(aux_cfg[7], edp->edp + DP_PHY_AUX_CFG7);
> >> +       writel(aux_cfg[8], edp->edp + DP_PHY_AUX_CFG8);
> >> +       writel(aux_cfg[9], edp->edp + DP_PHY_AUX_CFG9);
> > Replace this with a loop?
>
>
> Can we use below approach for this :
>
> #define DP_PHY_AUX_CFG(n)        (0x24 + (0x04 * (n)))
>
> for (int i = 0; i < 10; i++)
>
>      writel(aux_cfg[i], edp->edp + DP_PHY_AUX_CFG(i));

That's what I meant, thank you!

>
>
> >
> >>          writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> >>                 PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> >> @@ -519,16 +524,19 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
> >>   };
> >>
> >>   static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
> >> +       .aux_cfg = edp_phy_aux_cfg_v4,
> >>          .ver_ops = &qcom_edp_phy_ops_v4,
> >>   };
> >>
> >>   static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
> >> +       .aux_cfg = edp_phy_aux_cfg_v4,
> >>          .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
> >>          .ver_ops = &qcom_edp_phy_ops_v4,
> >>   };
> >>
> >>   static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
> >>          .is_edp = true,
> >> +       .aux_cfg = edp_phy_aux_cfg_v4,
> >>          .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
> >>          .ver_ops = &qcom_edp_phy_ops_v4,
> >>   };
> >> @@ -707,6 +715,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
> >>   };
> >>
> >>   static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
> >> +       .aux_cfg = edp_phy_aux_cfg_v4,
> >>          .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
> >>          .ver_ops = &qcom_edp_phy_ops_v6,
> >>   };
> >> --
> >> 2.17.1
> >>
> >
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index da2b32fb5b45..bcd5aced9e06 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -90,6 +90,7 @@  struct phy_ver_ops {
 
 struct qcom_edp_phy_cfg {
 	bool is_edp;
+	const u8 *aux_cfg;
 	const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
 	const struct phy_ver_ops *ver_ops;
 };
@@ -186,11 +187,15 @@  static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
 	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
 };
 
+static const u8 edp_phy_aux_cfg_v4[10] = {
+	0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
+};
+
 static int qcom_edp_phy_init(struct phy *phy)
 {
 	struct qcom_edp *edp = phy_get_drvdata(phy);
+	u8 aux_cfg[10];
 	int ret;
-	u8 cfg8;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
 	if (ret)
@@ -200,6 +205,8 @@  static int qcom_edp_phy_init(struct phy *phy)
 	if (ret)
 		goto out_disable_supplies;
 
+	memcpy(aux_cfg, edp->cfg->aux_cfg, sizeof(aux_cfg));
+
 	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
 	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
 	       edp->edp + DP_PHY_PD_CTL);
@@ -222,22 +229,20 @@  static int qcom_edp_phy_init(struct phy *phy)
 	 * even needed.
 	 */
 	if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
-		cfg8 = 0xb7;
-	else
-		cfg8 = 0x37;
+		aux_cfg[8] = 0xb7;
 
 	writel(0xfc, edp->edp + DP_PHY_MODE);
 
-	writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
-	writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
-	writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
-	writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
-	writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
-	writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
-	writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
-	writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
-	writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
-	writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
+	writel(aux_cfg[0], edp->edp + DP_PHY_AUX_CFG0);
+	writel(aux_cfg[1], edp->edp + DP_PHY_AUX_CFG1);
+	writel(aux_cfg[2], edp->edp + DP_PHY_AUX_CFG2);
+	writel(aux_cfg[3], edp->edp + DP_PHY_AUX_CFG3);
+	writel(aux_cfg[4], edp->edp + DP_PHY_AUX_CFG4);
+	writel(aux_cfg[5], edp->edp + DP_PHY_AUX_CFG5);
+	writel(aux_cfg[6], edp->edp + DP_PHY_AUX_CFG6);
+	writel(aux_cfg[7], edp->edp + DP_PHY_AUX_CFG7);
+	writel(aux_cfg[8], edp->edp + DP_PHY_AUX_CFG8);
+	writel(aux_cfg[9], edp->edp + DP_PHY_AUX_CFG9);
 
 	writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
 	       PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
@@ -519,16 +524,19 @@  static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
 };
 
 static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
+	.aux_cfg = edp_phy_aux_cfg_v4,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
 static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
+	.aux_cfg = edp_phy_aux_cfg_v4,
 	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
 static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
 	.is_edp = true,
+	.aux_cfg = edp_phy_aux_cfg_v4,
 	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
@@ -707,6 +715,7 @@  static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
 };
 
 static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
+	.aux_cfg = edp_phy_aux_cfg_v4,
 	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v6,
 };