| Message ID | 20240913175625.3190757-3-ggiordano@phytec.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Reconfigure 1.4GHz in AM62 PHYCORE SoM | expand |
On 10:56-20240913, Garrett Giordano wrote: > Remove the k3-am625-phyboard-lyra-1-4-ghz-opp overlay. We now > configure the a53_opp_table to include a 1.4 GHz node and set our > VDD_CORE to 0.85v in the k3-am62-phycore-som.dtsi. This change is to > match our PMIC which is now set to output 0.85v by default. > > Signed-off-by: Garrett Giordano <ggiordano@phytec.com> > --- > .../k3-am625-phyboard-lyra-1-4-ghz-opp.dtso | 20 ------------------- > 1 file changed, 20 deletions(-) > delete mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso > > diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso > deleted file mode 100644 > index 6ec6d57ec49c..000000000000 > --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso > +++ /dev/null > @@ -1,20 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only OR MIT > -/* > - * Copyright (C) 2024 PHYTEC America LLC > - * Author: Nathan Morrisson <nmorrisson@phytec.com> > - */ > - > -/dts-v1/; > -/plugin/; > - > -&vdd_core { > - regulator-min-microvolt = <850000>; > - regulator-max-microvolt = <850000>; > -}; > - > -&a53_opp_table { > - opp-1400000000 { > - opp-hz = /bits/ 64 <1400000000>; > - opp-supported-hw = <0x01 0x0004>; > - }; > -}; > -- > 2.25.1 > Did you build test this? Reason I ask is because you might have missed the Makefile edits needed?
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso deleted file mode 100644 index 6ec6d57ec49c..000000000000 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Copyright (C) 2024 PHYTEC America LLC - * Author: Nathan Morrisson <nmorrisson@phytec.com> - */ - -/dts-v1/; -/plugin/; - -&vdd_core { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; -}; - -&a53_opp_table { - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-supported-hw = <0x01 0x0004>; - }; -};
Remove the k3-am625-phyboard-lyra-1-4-ghz-opp overlay. We now configure the a53_opp_table to include a 1.4 GHz node and set our VDD_CORE to 0.85v in the k3-am62-phycore-som.dtsi. This change is to match our PMIC which is now set to output 0.85v by default. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> --- .../k3-am625-phyboard-lyra-1-4-ghz-opp.dtso | 20 ------------------- 1 file changed, 20 deletions(-) delete mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso