| Message ID | 20240908172153.177406-1-apokusinski01@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | iio: temperature: tmp006: support for drdy irq | expand |
On Sun, 8 Sep 2024 19:21:51 +0200 Antoni Pokusinski <apokusinski01@gmail.com> wrote: > This patch series adds support for the data ready interrupt of tmp006 > sensor. The interrupt line is pulled down once there is a measurement > available to be read. Hence, triggered buffers are used in order to > support continuous data capture for the sensor. > Applied to the testing branch of iio.git. I'll rebase that on rc1 once available and push this out as togreg at which point linux-next will pick it up etc. Thanks, Jonathan > Changes since v1: > * dt-binding: improve the commit message > * tmp006_read_raw: use iio_device_claim_direct_scoped() > * tmp006_channels[] : add trailing commas > * tmp006_trigger_handler: use s32 to check return value of read_word_data() > * tmp006_set_trigger_state: fix data alignment > * tmp006_probe: check return value of devm_iio_triggered_buffer_setup() > * tmp006_probe: remove IRQF_TRIGGER_FALLING from irqflags argument of > devm_request_threaded_irq() > * tmp006_probe: set avaliable_scan_masks to tmp006_scan_masks[] > > Antoni Pokusinski (2): > iio: temperature: tmp006: add triggered buffer support > dt-bindings: iio: temperature: tmp006: document interrupt > > .../bindings/iio/temperature/ti,tmp006.yaml | 6 + > drivers/iio/temperature/Kconfig | 2 + > drivers/iio/temperature/tmp006.c | 134 ++++++++++++++++-- > 3 files changed, 129 insertions(+), 13 deletions(-) >
This patch series adds support for the data ready interrupt of tmp006 sensor. The interrupt line is pulled down once there is a measurement available to be read. Hence, triggered buffers are used in order to support continuous data capture for the sensor. Changes since v1: * dt-binding: improve the commit message * tmp006_read_raw: use iio_device_claim_direct_scoped() * tmp006_channels[] : add trailing commas * tmp006_trigger_handler: use s32 to check return value of read_word_data() * tmp006_set_trigger_state: fix data alignment * tmp006_probe: check return value of devm_iio_triggered_buffer_setup() * tmp006_probe: remove IRQF_TRIGGER_FALLING from irqflags argument of devm_request_threaded_irq() * tmp006_probe: set avaliable_scan_masks to tmp006_scan_masks[] Antoni Pokusinski (2): iio: temperature: tmp006: add triggered buffer support dt-bindings: iio: temperature: tmp006: document interrupt .../bindings/iio/temperature/ti,tmp006.yaml | 6 + drivers/iio/temperature/Kconfig | 2 + drivers/iio/temperature/tmp006.c | 134 ++++++++++++++++-- 3 files changed, 129 insertions(+), 13 deletions(-)