@@ -412,6 +412,39 @@ void of_set_phy_eee_broken(struct phy_device *phydev)
phydev->eee_broken_modes = broken;
}
+/**
+ * of_set_phy_timing_role - Set the master/slave mode of the PHY
+ *
+ * @phydev: The phy_device struct
+ *
+ * Set master/slave configuration of the PHY based on the device tree.
+ */
+void of_set_phy_timing_role(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ const char *master;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO))
+ return;
+
+ if (!node)
+ return;
+
+ if (of_property_read_string(node, "timing-role", &master))
+ return;
+
+ if (strcmp(master, "force-master") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else if (strcmp(master, "force-slave") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ else if (strcmp(master, "prefer-master") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_MASTER_PREFERRED;
+ else if (strcmp(master, "prefer-slave") == 0)
+ phydev->master_slave_set = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
+ else
+ phydev_warn(phydev, "Unknown master-slave mode %s\n", master);
+}
+
/**
* phy_resolve_aneg_pause - Determine pause autoneg results
*
@@ -3608,6 +3608,9 @@ static int phy_probe(struct device *dev)
*/
of_set_phy_eee_broken(phydev);
+ /* Get master/slave strap overrides */
+ of_set_phy_timing_role(phydev);
+
/* The Pause Frame bits indicate that the PHY can support passing
* pause frames. During autonegotiation, the PHYs will determine if
* they should allow pause frames to pass. The MAC driver should then
@@ -1260,6 +1260,7 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
unsigned long *mask);
void of_set_phy_supported(struct phy_device *phydev);
void of_set_phy_eee_broken(struct phy_device *phydev);
+void of_set_phy_timing_role(struct phy_device *phydev);
int phy_speed_down_core(struct phy_device *phydev);
/**
Introduce support for configuring the master/slave role of PHYs based on the `timing-role` property in the device tree. While this functionality is necessary for Single Pair Ethernet (SPE) PHYs (1000/100/10Base-T1) where hardware strap pins may be unavailable or incorrectly set, it works for any PHY type. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- changes v3: - rename master-slave to timing-role --- drivers/net/phy/phy-core.c | 33 +++++++++++++++++++++++++++++++++ drivers/net/phy/phy_device.c | 3 +++ include/linux/phy.h | 1 + 3 files changed, 37 insertions(+)