diff mbox series

[1/5] dt-bindings: dsp: fix power domain count

Message ID 20240918182117.86221-2-laurentiumihalcea111@gmail.com (mailing list archive)
State Superseded
Headers show
Series configure imx8 dsp DT node for rproc usage | expand

Commit Message

Laurentiu Mihalcea Sept. 18, 2024, 6:21 p.m. UTC
From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Per the current binding, QM/QXP DSPs are supposed
to have 4 power domains, while the rest just 1.
For QM/QXP, the 4 power domains are: DSP, DSP_RAM,
MU13A, MU13B.

First off, drop MU13A from the count. This is attached
to the platform device of lsio_mu13. This decreases the
count to 3.

Secondly, drop DSP and DSP_RAM from the count for QXP.
These are attached to the platform devices of the lpcgs
(used as clock providers for the DSP).

With this in mind, the number of required power domains for
QXP is 1 (MU13B), while for QM it's 3 (MU13B, DSP, DSP_RAM).

Additionally, two extra power domains may be required in the
case of QM/QXP DSPs. These are IRQSTR_DSP and MU2A. For the nodes
using the "-hifi4" compatibles these PDs are optional, while for
nodes using the "-dsp" compatibles these are mandatory.

These changes reflect all of this information.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 .../devicetree/bindings/dsp/fsl,dsp.yaml      | 62 +++++++++++++++----
 1 file changed, 49 insertions(+), 13 deletions(-)

Comments

Frank Li Sept. 18, 2024, 6:49 p.m. UTC | #1
On Wed, Sep 18, 2024 at 02:21:13PM -0400, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
> Per the current binding, QM/QXP DSPs are supposed
> to have 4 power domains, while the rest just 1.
> For QM/QXP, the 4 power domains are: DSP, DSP_RAM,
> MU13A, MU13B.
>
> First off, drop MU13A from the count. This is attached
> to the platform device of lsio_mu13. This decreases the
> count to 3.
>
> Secondly, drop DSP and DSP_RAM from the count for QXP.
> These are attached to the platform devices of the lpcgs
> (used as clock providers for the DSP).
>
> With this in mind, the number of required power domains for
> QXP is 1 (MU13B), while for QM it's 3 (MU13B, DSP, DSP_RAM).
>
> Additionally, two extra power domains may be required in the
> case of QM/QXP DSPs. These are IRQSTR_DSP and MU2A. For the nodes
> using the "-hifi4" compatibles these PDs are optional, while for
> nodes using the "-dsp" compatibles these are mandatory.
>
> These changes reflect all of this information.

Can you wrap message to 75 char?

>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
>  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 62 +++++++++++++++----
>  1 file changed, 49 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> index 9af40da5688e..e2f016af1048 100644
> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> @@ -51,8 +51,6 @@ properties:
>      description:
>        List of phandle and PM domain specifier as documented in
>        Documentation/devicetree/bindings/power/power_domain.txt
> -    minItems: 1
> -    maxItems: 4
>
>    mboxes:
>      description:
> @@ -97,16 +95,55 @@ allOf:
>        properties:
>          compatible:
>            contains:
> -            enum:
> -              - fsl,imx8qxp-dsp
> -              - fsl,imx8qm-dsp
> -              - fsl,imx8qxp-hifi4
> -              - fsl,imx8qm-hifi4
> +            const: fsl,imx8qxp-hifi4
>      then:
>        properties:
>          power-domains:
> -          minItems: 4
> -    else:
> +          maxItems: 3
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qxp-dsp
> +    then:
> +      properties:
> +        power-domains:
> +          minItems: 3
> +          maxItems: 3

I remember only need maxItems, if minItems == maxItems.

Frank
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qm-dsp
> +    then:
> +      properties:
> +        power-domains:
> +          minItems: 5
> +          maxItems: 5
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qm-hifi4
> +    then:
> +      properties:
> +        power-domains:
> +          minItems: 3
> +          maxItems: 5
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8mp-dsp
> +              - fsl,imx8mp-hifi4
> +              - fsl,imx8ulp-dsp
> +              - fsl,imx8ulp-hifi4
> +    then:
>        properties:
>          power-domains:
>            maxItems: 1
> @@ -157,10 +194,9 @@ examples:
>                   <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
>                   <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
>          clock-names = "ipg", "ocram", "core";
> -        power-domains = <&pd IMX_SC_R_MU_13A>,
> -                        <&pd IMX_SC_R_MU_13B>,
> -                        <&pd IMX_SC_R_DSP>,
> -                        <&pd IMX_SC_R_DSP_RAM>;
> +        power-domains = <&pd IMX_SC_R_MU_13B>,
> +                        <&pd IMX_SC_R_IRQSTR_DSP>,
> +                        <&pd IMX_SC_R_MU_2A>;
>          mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
>          mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
>          memory-region = <&dsp_reserved>;
> --
> 2.34.1
>
Rob Herring (Arm) Sept. 18, 2024, 7:36 p.m. UTC | #2
On Wed, 18 Sep 2024 14:21:13 -0400, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> 
> Per the current binding, QM/QXP DSPs are supposed
> to have 4 power domains, while the rest just 1.
> For QM/QXP, the 4 power domains are: DSP, DSP_RAM,
> MU13A, MU13B.
> 
> First off, drop MU13A from the count. This is attached
> to the platform device of lsio_mu13. This decreases the
> count to 3.
> 
> Secondly, drop DSP and DSP_RAM from the count for QXP.
> These are attached to the platform devices of the lpcgs
> (used as clock providers for the DSP).
> 
> With this in mind, the number of required power domains for
> QXP is 1 (MU13B), while for QM it's 3 (MU13B, DSP, DSP_RAM).
> 
> Additionally, two extra power domains may be required in the
> case of QM/QXP DSPs. These are IRQSTR_DSP and MU2A. For the nodes
> using the "-hifi4" compatibles these PDs are optional, while for
> nodes using the "-dsp" compatibles these are mandatory.
> 
> These changes reflect all of this information.
> 
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
>  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 62 +++++++++++++++----
>  1 file changed, 49 insertions(+), 13 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mailbox/arm,mhuv2.example.dtb: dsp@596e8000: power-domains: [[4294967295, 0], [4294967295, 1], [4294967295, 2], [4294967295, 3]] is too long
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240918182117.86221-2-laurentiumihalcea111@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Rob Herring (Arm) Sept. 18, 2024, 8:37 p.m. UTC | #3
On Wed, Sep 18, 2024 at 02:21:13PM -0400, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The subject should say this is for fsl,dsp, not *all* dsp's.
Laurentiu Mihalcea Sept. 22, 2024, 11:03 p.m. UTC | #4
On 9/18/2024 9:49 PM, Frank Li wrote:
> On Wed, Sep 18, 2024 at 02:21:13PM -0400, Laurentiu Mihalcea wrote:
>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>
>> Per the current binding, QM/QXP DSPs are supposed
>> to have 4 power domains, while the rest just 1.
>> For QM/QXP, the 4 power domains are: DSP, DSP_RAM,
>> MU13A, MU13B.
>>
>> First off, drop MU13A from the count. This is attached
>> to the platform device of lsio_mu13. This decreases the
>> count to 3.
>>
>> Secondly, drop DSP and DSP_RAM from the count for QXP.
>> These are attached to the platform devices of the lpcgs
>> (used as clock providers for the DSP).
>>
>> With this in mind, the number of required power domains for
>> QXP is 1 (MU13B), while for QM it's 3 (MU13B, DSP, DSP_RAM).
>>
>> Additionally, two extra power domains may be required in the
>> case of QM/QXP DSPs. These are IRQSTR_DSP and MU2A. For the nodes
>> using the "-hifi4" compatibles these PDs are optional, while for
>> nodes using the "-dsp" compatibles these are mandatory.
>>
>> These changes reflect all of this information.
> Can you wrap message to 75 char?
Shall fix in V2.
>
>> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>> ---
>>  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 62 +++++++++++++++----
>>  1 file changed, 49 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
>> index 9af40da5688e..e2f016af1048 100644
>> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
>> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
>> @@ -51,8 +51,6 @@ properties:
>>      description:
>>        List of phandle and PM domain specifier as documented in
>>        Documentation/devicetree/bindings/power/power_domain.txt
>> -    minItems: 1
>> -    maxItems: 4
>>
>>    mboxes:
>>      description:
>> @@ -97,16 +95,55 @@ allOf:
>>        properties:
>>          compatible:
>>            contains:
>> -            enum:
>> -              - fsl,imx8qxp-dsp
>> -              - fsl,imx8qm-dsp
>> -              - fsl,imx8qxp-hifi4
>> -              - fsl,imx8qm-hifi4
>> +            const: fsl,imx8qxp-hifi4
>>      then:
>>        properties:
>>          power-domains:
>> -          minItems: 4
>> -    else:
>> +          maxItems: 3
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx8qxp-dsp
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 3
>> +          maxItems: 3
> I remember only need maxItems, if minItems == maxItems.
Might be off here but from my own testing and from looking at dtschema/fixups.py it would seem that's not really applicable to subschemas under "then"/"else" blocks.
>
> Frank
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx8qm-dsp
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 5
>> +          maxItems: 5
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx8qm-hifi4
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 3
>> +          maxItems: 5
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - fsl,imx8mp-dsp
>> +              - fsl,imx8mp-hifi4
>> +              - fsl,imx8ulp-dsp
>> +              - fsl,imx8ulp-hifi4
>> +    then:
>>        properties:
>>          power-domains:
>>            maxItems: 1
>> @@ -157,10 +194,9 @@ examples:
>>                   <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
>>                   <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
>>          clock-names = "ipg", "ocram", "core";
>> -        power-domains = <&pd IMX_SC_R_MU_13A>,
>> -                        <&pd IMX_SC_R_MU_13B>,
>> -                        <&pd IMX_SC_R_DSP>,
>> -                        <&pd IMX_SC_R_DSP_RAM>;
>> +        power-domains = <&pd IMX_SC_R_MU_13B>,
>> +                        <&pd IMX_SC_R_IRQSTR_DSP>,
>> +                        <&pd IMX_SC_R_MU_2A>;
>>          mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
>>          mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
>>          memory-region = <&dsp_reserved>;
>> --
>> 2.34.1
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index 9af40da5688e..e2f016af1048 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -51,8 +51,6 @@  properties:
     description:
       List of phandle and PM domain specifier as documented in
       Documentation/devicetree/bindings/power/power_domain.txt
-    minItems: 1
-    maxItems: 4
 
   mboxes:
     description:
@@ -97,16 +95,55 @@  allOf:
       properties:
         compatible:
           contains:
-            enum:
-              - fsl,imx8qxp-dsp
-              - fsl,imx8qm-dsp
-              - fsl,imx8qxp-hifi4
-              - fsl,imx8qm-hifi4
+            const: fsl,imx8qxp-hifi4
     then:
       properties:
         power-domains:
-          minItems: 4
-    else:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dsp
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dsp
+    then:
+      properties:
+        power-domains:
+          minItems: 5
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-hifi4
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-dsp
+              - fsl,imx8mp-hifi4
+              - fsl,imx8ulp-dsp
+              - fsl,imx8ulp-hifi4
+    then:
       properties:
         power-domains:
           maxItems: 1
@@ -157,10 +194,9 @@  examples:
                  <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
                  <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
         clock-names = "ipg", "ocram", "core";
-        power-domains = <&pd IMX_SC_R_MU_13A>,
-                        <&pd IMX_SC_R_MU_13B>,
-                        <&pd IMX_SC_R_DSP>,
-                        <&pd IMX_SC_R_DSP_RAM>;
+        power-domains = <&pd IMX_SC_R_MU_13B>,
+                        <&pd IMX_SC_R_IRQSTR_DSP>,
+                        <&pd IMX_SC_R_MU_2A>;
         mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
         mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
         memory-region = <&dsp_reserved>;