Message ID | 20240918081839.259-3-paul.barker.ct@bp.renesas.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | ec8234717db8589078d08b17efa528a235c61f4f |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | Fix maximum TX/RX frame sizes in ravb driver | expand |
On Wed, Sep 18, 2024 at 09:18:39AM +0100, Paul Barker wrote: > The RX frame size limit should not be based on the current MTU setting. > Instead it should be based on the hardware capabilities. > > While we're here, improve the description of the receive frame length > setting as suggested by Niklas. > > Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") > Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Simon Horman <horms@kernel.org>
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index e73cdba58516..d2a6518532f3 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -555,8 +555,16 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) static void ravb_emac_init_rcar(struct net_device *ndev) { - /* Receive frame limit set register */ - ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR); + struct ravb_private *priv = netdev_priv(ndev); + + /* Set receive frame length + * + * The length set here describes the frame from the destination address + * up to and including the CRC data. However only the frame data, + * excluding the CRC, are transferred to memory. To allow for the + * largest frames add the CRC length to the maximum Rx descriptor size. + */ + ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR); /* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */ ravb_write(ndev, ECMR_ZPF | ECMR_DM |