diff mbox series

[v7,2/2] hwmon: (isl28022) new driver for ISL28022 power monitor

Message ID 20240925031131.14645-3-yikai.tsai.wiwynn@gmail.com (mailing list archive)
State Superseded
Headers show
Series hwmon: (isl28022) new driver for ISL28022 power monitor | expand

Commit Message

Yikai Tsai Sept. 25, 2024, 3:11 a.m. UTC 
Driver for Renesas ISL28022 power monitor with I2C interface.
The device monitors voltage, current via shunt resistor
and calculated power.

Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>
---
 Documentation/hwmon/index.rst    |   1 +
 Documentation/hwmon/isl28022.rst |  63 ++++
 MAINTAINERS                      |   2 +
 drivers/hwmon/Kconfig            |  11 +
 drivers/hwmon/Makefile           |   1 +
 drivers/hwmon/isl28022.c         | 533 +++++++++++++++++++++++++++++++
 6 files changed, 611 insertions(+)
 create mode 100644 Documentation/hwmon/isl28022.rst
 create mode 100644 drivers/hwmon/isl28022.c

Comments

Geert Uytterhoeven Sept. 25, 2024, 7:18 a.m. UTC | #1 
Hi Yikai,

On Wed, Sep 25, 2024 at 5:11 AM Yikai Tsai <yikai.tsai.wiwynn@gmail.com> wrote:
> Driver for Renesas ISL28022 power monitor with I2C interface.
> The device monitors voltage, current via shunt resistor
> and calculated power.
>
> Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
> Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>

Thanks for your patch!

> --- /dev/null
> +++ b/drivers/hwmon/isl28022.c

> +static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
> +{
> +       u32 val;
> +       int err;
> +
> +       err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
> +       if (err == -EINVAL)
> +               val = 10000;
> +       else if (err < 0)
> +               return err;
> +       data->shunt = val;
> +
> +       err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
> +       if (err == -EINVAL)
> +               val = 320000;
> +       else if (err < 0)
> +               return err;
> +
> +       switch (val) {
> +       case 40000:
> +               data->gain = 1;
> +               if (data->shunt < 800)
> +                       goto shunt_invalid;
> +               break;
> +       case 80000:
> +               data->gain = 2;
> +               if (data->shunt < 1600)
> +                       goto shunt_invalid;
> +               break;
> +       case 160000:
> +               data->gain = 4;
> +               if (data->shunt < 3200)
> +                       goto shunt_invalid;
> +               break;
> +       case 320000:
> +               data->gain = 8;
> +               if (data->shunt < 6400)
> +                       goto shunt_invalid;
> +               break;
> +       default:
> +               dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);

I doubt this compiles well?

> +               return -EINVAL;

return dev_err_probe(dev, -EINVAL, "renesas,shunt-range-microvolt
invalid value %d\n", val);

> +       }
> +
> +       err = device_property_read_u32(dev, "renesas,average-samples", &val);
> +       if (err == -EINVAL)
> +               val = 1;
> +       else if (err < 0)
> +               return err;
> +       if (val > 128 || hweight32(val) != 1) {
> +               dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
> +               return -EINVAL;

Likewise.

> +       }
> +       data->average = val;
> +
> +       return 0;
> +
> +shunt_invalid:
> +       dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
> +       return -EINVAL;

One more.

> +}

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
kernel test robot Sept. 25, 2024, 2:24 p.m. UTC | #2 
Hi Yikai,

kernel test robot noticed the following build warnings:

[auto build test WARNING on groeck-staging/hwmon-next]
[also build test WARNING on linus/master v6.11 next-20240925]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Yikai-Tsai/dt-bindings-hwmon-add-renesas-isl28022/20240925-111332
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20240925031131.14645-3-yikai.tsai.wiwynn%40gmail.com
patch subject: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
config: arc-allyesconfig (https://download.01.org/0day-ci/archive/20240925/202409252223.s09tP6IL-lkp@intel.com/config)
compiler: arceb-elf-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240925/202409252223.s09tP6IL-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409252223.s09tP6IL-lkp@intel.com/

All warnings (new ones prefixed by >>):

   drivers/hwmon/isl28022.c: In function 'isl28022_read_properties':
>> drivers/hwmon/isl28022.c:396:36: warning: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
     396 |                 dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                                    |
         |                                    char *
   In file included from include/linux/device.h:15,
                    from include/linux/acpi.h:14,
                    from include/linux/i2c.h:13,
                    from drivers/hwmon/isl28022.c:11:
   include/linux/dev_printk.h:278:64: note: expected 'int' but argument is of type 'char *'
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                            ~~~~^~~
>> drivers/hwmon/isl28022.c:396:88: warning: passing argument 3 of 'dev_err_probe' makes pointer from integer without a cast [-Wint-conversion]
     396 |                 dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
         |                                                                                        ^~~
         |                                                                                        |
         |                                                                                        u32 {aka unsigned int}
   include/linux/dev_printk.h:278:81: note: expected 'const char *' but argument is of type 'u32' {aka 'unsigned int'}
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                     ~~~~~~~~~~~~^~~
   drivers/hwmon/isl28022.c:406:36: warning: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
     406 |                 dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                                    |
         |                                    char *
   include/linux/dev_printk.h:278:64: note: expected 'int' but argument is of type 'char *'
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                            ~~~~^~~
   drivers/hwmon/isl28022.c:406:82: warning: passing argument 3 of 'dev_err_probe' makes pointer from integer without a cast [-Wint-conversion]
     406 |                 dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
         |                                                                                  ^~~
         |                                                                                  |
         |                                                                                  u32 {aka unsigned int}
   include/linux/dev_printk.h:278:81: note: expected 'const char *' but argument is of type 'u32' {aka 'unsigned int'}
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                     ~~~~~~~~~~~~^~~
   drivers/hwmon/isl28022.c:414:28: warning: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
     414 |         dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
         |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                            |
         |                            char *
   include/linux/dev_printk.h:278:64: note: expected 'int' but argument is of type 'char *'
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                            ~~~~^~~
   drivers/hwmon/isl28022.c:414:87: warning: passing argument 3 of 'dev_err_probe' makes pointer from integer without a cast [-Wint-conversion]
     414 |         dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
         |                                                                                   ~~~~^~~~~~~
         |                                                                                       |
         |                                                                                       u32 {aka unsigned int}
   include/linux/dev_printk.h:278:81: note: expected 'const char *' but argument is of type 'u32' {aka 'unsigned int'}
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                     ~~~~~~~~~~~~^~~


vim +/dev_err_probe +396 drivers/hwmon/isl28022.c

   346	
   347	/*
   348	 * read property values and make consistency checks.
   349	 *
   350	 * following values for shunt range and resistor are allowed:
   351	 *   40 mV -> gain 1, shunt min.  800 micro ohms
   352	 *   80 mV -> gain 2, shunt min. 1600 micro ohms
   353	 *  160 mV -> gain 4, shunt min. 3200 micro ohms
   354	 *  320 mV -> gain 8, shunt min. 6400 micro ohms
   355	 */
   356	static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
   357	{
   358		u32 val;
   359		int err;
   360	
   361		err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
   362		if (err == -EINVAL)
   363			val = 10000;
   364		else if (err < 0)
   365			return err;
   366		data->shunt = val;
   367	
   368		err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
   369		if (err == -EINVAL)
   370			val = 320000;
   371		else if (err < 0)
   372			return err;
   373	
   374		switch (val) {
   375		case 40000:
   376			data->gain = 1;
   377			if (data->shunt < 800)
   378				goto shunt_invalid;
   379			break;
   380		case 80000:
   381			data->gain = 2;
   382			if (data->shunt < 1600)
   383				goto shunt_invalid;
   384			break;
   385		case 160000:
   386			data->gain = 4;
   387			if (data->shunt < 3200)
   388				goto shunt_invalid;
   389			break;
   390		case 320000:
   391			data->gain = 8;
   392			if (data->shunt < 6400)
   393				goto shunt_invalid;
   394			break;
   395		default:
 > 396			dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
   397			return -EINVAL;
   398		}
   399	
   400		err = device_property_read_u32(dev, "renesas,average-samples", &val);
   401		if (err == -EINVAL)
   402			val = 1;
   403		else if (err < 0)
   404			return err;
   405		if (val > 128 || hweight32(val) != 1) {
   406			dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
   407			return -EINVAL;
   408		}
   409		data->average = val;
   410	
   411		return 0;
   412	
   413	shunt_invalid:
   414		dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
   415		return -EINVAL;
   416	}
   417
kernel test robot Sept. 25, 2024, 2:35 p.m. UTC | #3 
Hi Yikai,

kernel test robot noticed the following build errors:

[auto build test ERROR on groeck-staging/hwmon-next]
[also build test ERROR on linus/master v6.11 next-20240925]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Yikai-Tsai/dt-bindings-hwmon-add-renesas-isl28022/20240925-111332
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20240925031131.14645-3-yikai.tsai.wiwynn%40gmail.com
patch subject: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
config: openrisc-allyesconfig (https://download.01.org/0day-ci/archive/20240925/202409252244.3ZXLJlyK-lkp@intel.com/config)
compiler: or1k-linux-gcc (GCC) 14.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240925/202409252244.3ZXLJlyK-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409252244.3ZXLJlyK-lkp@intel.com/

All errors (new ones prefixed by >>):

   drivers/hwmon/isl28022.c: In function 'isl28022_read_properties':
>> drivers/hwmon/isl28022.c:396:36: error: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
     396 |                 dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                                    |
         |                                    char *
   In file included from include/linux/device.h:15,
                    from include/linux/acpi.h:14,
                    from include/linux/i2c.h:13,
                    from drivers/hwmon/isl28022.c:11:
   include/linux/dev_printk.h:278:64: note: expected 'int' but argument is of type 'char *'
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                            ~~~~^~~
>> drivers/hwmon/isl28022.c:396:88: error: passing argument 3 of 'dev_err_probe' makes pointer from integer without a cast [-Wint-conversion]
     396 |                 dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
         |                                                                                        ^~~
         |                                                                                        |
         |                                                                                        u32 {aka unsigned int}
   include/linux/dev_printk.h:278:81: note: expected 'const char *' but argument is of type 'u32' {aka 'unsigned int'}
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                     ~~~~~~~~~~~~^~~
   drivers/hwmon/isl28022.c:406:36: error: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
     406 |                 dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                                    |
         |                                    char *
   include/linux/dev_printk.h:278:64: note: expected 'int' but argument is of type 'char *'
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                            ~~~~^~~
   drivers/hwmon/isl28022.c:406:82: error: passing argument 3 of 'dev_err_probe' makes pointer from integer without a cast [-Wint-conversion]
     406 |                 dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
         |                                                                                  ^~~
         |                                                                                  |
         |                                                                                  u32 {aka unsigned int}
   include/linux/dev_printk.h:278:81: note: expected 'const char *' but argument is of type 'u32' {aka 'unsigned int'}
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                     ~~~~~~~~~~~~^~~
   drivers/hwmon/isl28022.c:414:28: error: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
     414 |         dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
         |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                            |
         |                            char *
   include/linux/dev_printk.h:278:64: note: expected 'int' but argument is of type 'char *'
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                            ~~~~^~~
   drivers/hwmon/isl28022.c:414:87: error: passing argument 3 of 'dev_err_probe' makes pointer from integer without a cast [-Wint-conversion]
     414 |         dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
         |                                                                                   ~~~~^~~~~~~
         |                                                                                       |
         |                                                                                       u32 {aka unsigned int}
   include/linux/dev_printk.h:278:81: note: expected 'const char *' but argument is of type 'u32' {aka 'unsigned int'}
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                     ~~~~~~~~~~~~^~~


vim +/dev_err_probe +396 drivers/hwmon/isl28022.c

   346	
   347	/*
   348	 * read property values and make consistency checks.
   349	 *
   350	 * following values for shunt range and resistor are allowed:
   351	 *   40 mV -> gain 1, shunt min.  800 micro ohms
   352	 *   80 mV -> gain 2, shunt min. 1600 micro ohms
   353	 *  160 mV -> gain 4, shunt min. 3200 micro ohms
   354	 *  320 mV -> gain 8, shunt min. 6400 micro ohms
   355	 */
   356	static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
   357	{
   358		u32 val;
   359		int err;
   360	
   361		err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
   362		if (err == -EINVAL)
   363			val = 10000;
   364		else if (err < 0)
   365			return err;
   366		data->shunt = val;
   367	
   368		err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
   369		if (err == -EINVAL)
   370			val = 320000;
   371		else if (err < 0)
   372			return err;
   373	
   374		switch (val) {
   375		case 40000:
   376			data->gain = 1;
   377			if (data->shunt < 800)
   378				goto shunt_invalid;
   379			break;
   380		case 80000:
   381			data->gain = 2;
   382			if (data->shunt < 1600)
   383				goto shunt_invalid;
   384			break;
   385		case 160000:
   386			data->gain = 4;
   387			if (data->shunt < 3200)
   388				goto shunt_invalid;
   389			break;
   390		case 320000:
   391			data->gain = 8;
   392			if (data->shunt < 6400)
   393				goto shunt_invalid;
   394			break;
   395		default:
 > 396			dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
   397			return -EINVAL;
   398		}
   399	
   400		err = device_property_read_u32(dev, "renesas,average-samples", &val);
   401		if (err == -EINVAL)
   402			val = 1;
   403		else if (err < 0)
   404			return err;
   405		if (val > 128 || hweight32(val) != 1) {
   406			dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
   407			return -EINVAL;
   408		}
   409		data->average = val;
   410	
   411		return 0;
   412	
   413	shunt_invalid:
   414		dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
   415		return -EINVAL;
   416	}
   417
kernel test robot Sept. 26, 2024, 12:50 a.m. UTC | #4 
Hi Yikai,

kernel test robot noticed the following build errors:

[auto build test ERROR on groeck-staging/hwmon-next]
[also build test ERROR on linus/master v6.11 next-20240925]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Yikai-Tsai/dt-bindings-hwmon-add-renesas-isl28022/20240925-111332
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20240925031131.14645-3-yikai.tsai.wiwynn%40gmail.com
patch subject: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20240926/202409260859.DetsBmBQ-lkp@intel.com/config)
compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 7773243d9916f98ba0ffce0c3a960e4aa9f03e81)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240926/202409260859.DetsBmBQ-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409260859.DetsBmBQ-lkp@intel.com/

All errors (new ones prefixed by >>):

   In file included from drivers/hwmon/isl28022.c:11:
   In file included from include/linux/i2c.h:19:
   In file included from include/linux/regulator/consumer.h:35:
   In file included from include/linux/suspend.h:5:
   In file included from include/linux/swap.h:9:
   In file included from include/linux/memcontrol.h:13:
   In file included from include/linux/cgroup.h:25:
   In file included from include/linux/kernel_stat.h:8:
   In file included from include/linux/interrupt.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
   In file included from include/asm-generic/hardirq.h:17:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:14:
   In file included from arch/hexagon/include/asm/io.h:328:
   include/asm-generic/io.h:548:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
     548 |         val = __raw_readb(PCI_IOBASE + addr);
         |                           ~~~~~~~~~~ ^
   include/asm-generic/io.h:561:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
     561 |         val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
         |                                                         ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
      37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
         |                                                   ^
   In file included from drivers/hwmon/isl28022.c:11:
   In file included from include/linux/i2c.h:19:
   In file included from include/linux/regulator/consumer.h:35:
   In file included from include/linux/suspend.h:5:
   In file included from include/linux/swap.h:9:
   In file included from include/linux/memcontrol.h:13:
   In file included from include/linux/cgroup.h:25:
   In file included from include/linux/kernel_stat.h:8:
   In file included from include/linux/interrupt.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
   In file included from include/asm-generic/hardirq.h:17:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:14:
   In file included from arch/hexagon/include/asm/io.h:328:
   include/asm-generic/io.h:574:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
     574 |         val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
         |                                                         ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
      35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
         |                                                   ^
   In file included from drivers/hwmon/isl28022.c:11:
   In file included from include/linux/i2c.h:19:
   In file included from include/linux/regulator/consumer.h:35:
   In file included from include/linux/suspend.h:5:
   In file included from include/linux/swap.h:9:
   In file included from include/linux/memcontrol.h:13:
   In file included from include/linux/cgroup.h:25:
   In file included from include/linux/kernel_stat.h:8:
   In file included from include/linux/interrupt.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
   In file included from include/asm-generic/hardirq.h:17:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:14:
   In file included from arch/hexagon/include/asm/io.h:328:
   include/asm-generic/io.h:585:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
     585 |         __raw_writeb(value, PCI_IOBASE + addr);
         |                             ~~~~~~~~~~ ^
   include/asm-generic/io.h:595:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
     595 |         __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
         |                                                       ~~~~~~~~~~ ^
   include/asm-generic/io.h:605:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
     605 |         __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
         |                                                       ~~~~~~~~~~ ^
   In file included from drivers/hwmon/isl28022.c:11:
   In file included from include/linux/i2c.h:19:
   In file included from include/linux/regulator/consumer.h:35:
   In file included from include/linux/suspend.h:5:
   In file included from include/linux/swap.h:9:
   In file included from include/linux/memcontrol.h:21:
   In file included from include/linux/mm.h:2228:
   include/linux/vmstat.h:514:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
     514 |         return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
         |                               ~~~~~~~~~~~ ^ ~~~
>> drivers/hwmon/isl28022.c:396:22: error: incompatible pointer to integer conversion passing 'char[48]' to parameter of type 'int' [-Wint-conversion]
     396 |                 dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/dev_printk.h:278:64: note: passing argument to parameter 'err' here
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                ^
>> drivers/hwmon/isl28022.c:396:74: error: incompatible integer to pointer conversion passing 'u32' (aka 'unsigned int') to parameter of type 'const char *' [-Wint-conversion]
     396 |                 dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
         |                                                                                        ^~~
   include/linux/dev_printk.h:278:81: note: passing argument to parameter 'fmt' here
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                                 ^
   drivers/hwmon/isl28022.c:406:22: error: incompatible pointer to integer conversion passing 'char[42]' to parameter of type 'int' [-Wint-conversion]
     406 |                 dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/dev_printk.h:278:64: note: passing argument to parameter 'err' here
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                ^
   drivers/hwmon/isl28022.c:406:68: error: incompatible integer to pointer conversion passing 'u32' (aka 'unsigned int') to parameter of type 'const char *' [-Wint-conversion]
     406 |                 dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
         |                                                                                  ^~~
   include/linux/dev_printk.h:278:81: note: passing argument to parameter 'fmt' here
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                                 ^
   drivers/hwmon/isl28022.c:414:21: error: incompatible pointer to integer conversion passing 'char[51]' to parameter of type 'int' [-Wint-conversion]
     414 |         dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
         |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/dev_printk.h:278:64: note: passing argument to parameter 'err' here
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                ^
   drivers/hwmon/isl28022.c:414:76: error: incompatible integer to pointer conversion passing 'u32' (aka 'unsigned int') to parameter of type 'const char *' [-Wint-conversion]
     414 |         dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
         |                                                                                   ^~~~~~~~~~~
   include/linux/dev_printk.h:278:81: note: passing argument to parameter 'fmt' here
     278 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
         |                                                                                 ^
   7 warnings and 6 errors generated.


vim +396 drivers/hwmon/isl28022.c

   346	
   347	/*
   348	 * read property values and make consistency checks.
   349	 *
   350	 * following values for shunt range and resistor are allowed:
   351	 *   40 mV -> gain 1, shunt min.  800 micro ohms
   352	 *   80 mV -> gain 2, shunt min. 1600 micro ohms
   353	 *  160 mV -> gain 4, shunt min. 3200 micro ohms
   354	 *  320 mV -> gain 8, shunt min. 6400 micro ohms
   355	 */
   356	static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
   357	{
   358		u32 val;
   359		int err;
   360	
   361		err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
   362		if (err == -EINVAL)
   363			val = 10000;
   364		else if (err < 0)
   365			return err;
   366		data->shunt = val;
   367	
   368		err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
   369		if (err == -EINVAL)
   370			val = 320000;
   371		else if (err < 0)
   372			return err;
   373	
   374		switch (val) {
   375		case 40000:
   376			data->gain = 1;
   377			if (data->shunt < 800)
   378				goto shunt_invalid;
   379			break;
   380		case 80000:
   381			data->gain = 2;
   382			if (data->shunt < 1600)
   383				goto shunt_invalid;
   384			break;
   385		case 160000:
   386			data->gain = 4;
   387			if (data->shunt < 3200)
   388				goto shunt_invalid;
   389			break;
   390		case 320000:
   391			data->gain = 8;
   392			if (data->shunt < 6400)
   393				goto shunt_invalid;
   394			break;
   395		default:
 > 396			dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
   397			return -EINVAL;
   398		}
   399	
   400		err = device_property_read_u32(dev, "renesas,average-samples", &val);
   401		if (err == -EINVAL)
   402			val = 1;
   403		else if (err < 0)
   404			return err;
   405		if (val > 128 || hweight32(val) != 1) {
   406			dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
   407			return -EINVAL;
   408		}
   409		data->average = val;
   410	
   411		return 0;
   412	
   413	shunt_invalid:
   414		dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
   415		return -EINVAL;
   416	}
   417
kernel test robot Sept. 27, 2024, 4:47 a.m. UTC | #5 
Hi Yikai,

kernel test robot noticed the following build warnings:

[auto build test WARNING on groeck-staging/hwmon-next]
[also build test WARNING on linus/master v6.11 next-20240926]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Yikai-Tsai/dt-bindings-hwmon-add-renesas-isl28022/20240925-111332
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20240925031131.14645-3-yikai.tsai.wiwynn%40gmail.com
patch subject: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
config: i386-randconfig-r133-20240927 (https://download.01.org/0day-ci/archive/20240927/202409271235.PtMXq9Kx-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240927/202409271235.PtMXq9Kx-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409271235.PtMXq9Kx-lkp@intel.com/

sparse warnings: (new ones prefixed by >>)
>> drivers/hwmon/isl28022.c:396:36: sparse: sparse: incorrect type in argument 2 (different base types) @@     expected int err @@     got char * @@
   drivers/hwmon/isl28022.c:396:36: sparse:     expected int err
   drivers/hwmon/isl28022.c:396:36: sparse:     got char *
>> drivers/hwmon/isl28022.c:396:88: sparse: sparse: incorrect type in argument 3 (different base types) @@     expected char const *fmt @@     got unsigned int [addressable] [assigned] [usertype] val @@
   drivers/hwmon/isl28022.c:396:88: sparse:     expected char const *fmt
   drivers/hwmon/isl28022.c:396:88: sparse:     got unsigned int [addressable] [assigned] [usertype] val
   drivers/hwmon/isl28022.c:406:36: sparse: sparse: incorrect type in argument 2 (different base types) @@     expected int err @@     got char * @@
   drivers/hwmon/isl28022.c:406:36: sparse:     expected int err
   drivers/hwmon/isl28022.c:406:36: sparse:     got char *
   drivers/hwmon/isl28022.c:406:82: sparse: sparse: incorrect type in argument 3 (different base types) @@     expected char const *fmt @@     got unsigned int [addressable] [assigned] [usertype] val @@
   drivers/hwmon/isl28022.c:406:82: sparse:     expected char const *fmt
   drivers/hwmon/isl28022.c:406:82: sparse:     got unsigned int [addressable] [assigned] [usertype] val
   drivers/hwmon/isl28022.c:414:28: sparse: sparse: incorrect type in argument 2 (different base types) @@     expected int err @@     got char * @@
   drivers/hwmon/isl28022.c:414:28: sparse:     expected int err
   drivers/hwmon/isl28022.c:414:28: sparse:     got char *
>> drivers/hwmon/isl28022.c:414:87: sparse: sparse: incorrect type in argument 3 (different base types) @@     expected char const *fmt @@     got unsigned int [usertype] shunt @@
   drivers/hwmon/isl28022.c:414:87: sparse:     expected char const *fmt
   drivers/hwmon/isl28022.c:414:87: sparse:     got unsigned int [usertype] shunt
   drivers/hwmon/isl28022.c: note: in included file (through include/linux/mmzone.h, include/linux/gfp.h, include/linux/xarray.h, ...):
   include/linux/page-flags.h:235:46: sparse: sparse: self-comparison always evaluates to false
   include/linux/page-flags.h:235:46: sparse: sparse: self-comparison always evaluates to false

vim +396 drivers/hwmon/isl28022.c

   346	
   347	/*
   348	 * read property values and make consistency checks.
   349	 *
   350	 * following values for shunt range and resistor are allowed:
   351	 *   40 mV -> gain 1, shunt min.  800 micro ohms
   352	 *   80 mV -> gain 2, shunt min. 1600 micro ohms
   353	 *  160 mV -> gain 4, shunt min. 3200 micro ohms
   354	 *  320 mV -> gain 8, shunt min. 6400 micro ohms
   355	 */
   356	static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
   357	{
   358		u32 val;
   359		int err;
   360	
   361		err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
   362		if (err == -EINVAL)
   363			val = 10000;
   364		else if (err < 0)
   365			return err;
   366		data->shunt = val;
   367	
   368		err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
   369		if (err == -EINVAL)
   370			val = 320000;
   371		else if (err < 0)
   372			return err;
   373	
   374		switch (val) {
   375		case 40000:
   376			data->gain = 1;
   377			if (data->shunt < 800)
   378				goto shunt_invalid;
   379			break;
   380		case 80000:
   381			data->gain = 2;
   382			if (data->shunt < 1600)
   383				goto shunt_invalid;
   384			break;
   385		case 160000:
   386			data->gain = 4;
   387			if (data->shunt < 3200)
   388				goto shunt_invalid;
   389			break;
   390		case 320000:
   391			data->gain = 8;
   392			if (data->shunt < 6400)
   393				goto shunt_invalid;
   394			break;
   395		default:
 > 396			dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
   397			return -EINVAL;
   398		}
   399	
   400		err = device_property_read_u32(dev, "renesas,average-samples", &val);
   401		if (err == -EINVAL)
   402			val = 1;
   403		else if (err < 0)
   404			return err;
   405		if (val > 128 || hweight32(val) != 1) {
 > 406			dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
   407			return -EINVAL;
   408		}
   409		data->average = val;
   410	
   411		return 0;
   412	
   413	shunt_invalid:
 > 414		dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
   415		return -EINVAL;
   416	}
   417
kernel test robot Sept. 27, 2024, 10:08 p.m. UTC | #6 
Hi Yikai,

kernel test robot noticed the following build warnings:

[auto build test WARNING on groeck-staging/hwmon-next]
[also build test WARNING on linus/master v6.11 next-20240927]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Yikai-Tsai/dt-bindings-hwmon-add-renesas-isl28022/20240925-111332
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20240925031131.14645-3-yikai.tsai.wiwynn%40gmail.com
patch subject: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
config: x86_64-randconfig-121-20240928 (https://download.01.org/0day-ci/archive/20240928/202409280806.yxX1K5ey-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.3.0-12) 11.3.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240928/202409280806.yxX1K5ey-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409280806.yxX1K5ey-lkp@intel.com/

sparse warnings: (new ones prefixed by >>)
   drivers/hwmon/isl28022.c:396:36: sparse: sparse: incorrect type in argument 2 (different base types) @@     expected int err @@     got char * @@
   drivers/hwmon/isl28022.c:396:36: sparse:     expected int err
   drivers/hwmon/isl28022.c:396:36: sparse:     got char *
   drivers/hwmon/isl28022.c:396:88: sparse: sparse: incorrect type in argument 3 (different base types) @@     expected char const *fmt @@     got unsigned int [addressable] [assigned] [usertype] val @@
   drivers/hwmon/isl28022.c:396:88: sparse:     expected char const *fmt
   drivers/hwmon/isl28022.c:396:88: sparse:     got unsigned int [addressable] [assigned] [usertype] val
   drivers/hwmon/isl28022.c:406:36: sparse: sparse: incorrect type in argument 2 (different base types) @@     expected int err @@     got char * @@
   drivers/hwmon/isl28022.c:406:36: sparse:     expected int err
   drivers/hwmon/isl28022.c:406:36: sparse:     got char *
   drivers/hwmon/isl28022.c:406:82: sparse: sparse: incorrect type in argument 3 (different base types) @@     expected char const *fmt @@     got unsigned int [addressable] [assigned] [usertype] val @@
   drivers/hwmon/isl28022.c:406:82: sparse:     expected char const *fmt
   drivers/hwmon/isl28022.c:406:82: sparse:     got unsigned int [addressable] [assigned] [usertype] val
   drivers/hwmon/isl28022.c:414:28: sparse: sparse: incorrect type in argument 2 (different base types) @@     expected int err @@     got char * @@
   drivers/hwmon/isl28022.c:414:28: sparse:     expected int err
   drivers/hwmon/isl28022.c:414:28: sparse:     got char *
   drivers/hwmon/isl28022.c:414:87: sparse: sparse: incorrect type in argument 3 (different base types) @@     expected char const *fmt @@     got unsigned int [usertype] shunt @@
   drivers/hwmon/isl28022.c:414:87: sparse:     expected char const *fmt
   drivers/hwmon/isl28022.c:414:87: sparse:     got unsigned int [usertype] shunt
>> drivers/hwmon/isl28022.c:396:36: sparse: sparse: non size-preserving pointer to integer cast
>> drivers/hwmon/isl28022.c:396:88: sparse: sparse: non size-preserving integer to pointer cast
   drivers/hwmon/isl28022.c:406:36: sparse: sparse: non size-preserving pointer to integer cast
   drivers/hwmon/isl28022.c:406:82: sparse: sparse: non size-preserving integer to pointer cast
   drivers/hwmon/isl28022.c:414:28: sparse: sparse: non size-preserving pointer to integer cast
   drivers/hwmon/isl28022.c:414:83: sparse: sparse: non size-preserving integer to pointer cast

vim +396 drivers/hwmon/isl28022.c

   346	
   347	/*
   348	 * read property values and make consistency checks.
   349	 *
   350	 * following values for shunt range and resistor are allowed:
   351	 *   40 mV -> gain 1, shunt min.  800 micro ohms
   352	 *   80 mV -> gain 2, shunt min. 1600 micro ohms
   353	 *  160 mV -> gain 4, shunt min. 3200 micro ohms
   354	 *  320 mV -> gain 8, shunt min. 6400 micro ohms
   355	 */
   356	static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
   357	{
   358		u32 val;
   359		int err;
   360	
   361		err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
   362		if (err == -EINVAL)
   363			val = 10000;
   364		else if (err < 0)
   365			return err;
   366		data->shunt = val;
   367	
   368		err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
   369		if (err == -EINVAL)
   370			val = 320000;
   371		else if (err < 0)
   372			return err;
   373	
   374		switch (val) {
   375		case 40000:
   376			data->gain = 1;
   377			if (data->shunt < 800)
   378				goto shunt_invalid;
   379			break;
   380		case 80000:
   381			data->gain = 2;
   382			if (data->shunt < 1600)
   383				goto shunt_invalid;
   384			break;
   385		case 160000:
   386			data->gain = 4;
   387			if (data->shunt < 3200)
   388				goto shunt_invalid;
   389			break;
   390		case 320000:
   391			data->gain = 8;
   392			if (data->shunt < 6400)
   393				goto shunt_invalid;
   394			break;
   395		default:
 > 396			dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
   397			return -EINVAL;
   398		}
   399	
   400		err = device_property_read_u32(dev, "renesas,average-samples", &val);
   401		if (err == -EINVAL)
   402			val = 1;
   403		else if (err < 0)
   404			return err;
   405		if (val > 128 || hweight32(val) != 1) {
   406			dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
   407			return -EINVAL;
   408		}
   409		data->average = val;
   410	
   411		return 0;
   412	
   413	shunt_invalid:
   414		dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
   415		return -EINVAL;
   416	}
   417
diff mbox series

Patch

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index ea3b5be8fe4f..4d15664bc41e 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -96,6 +96,7 @@  Hardware Monitoring Kernel Drivers
    ir35221
    ir38064
    ir36021
+   isl28022
    isl68137
    it87
    jc42
diff --git a/Documentation/hwmon/isl28022.rst b/Documentation/hwmon/isl28022.rst
new file mode 100644
index 000000000000..8d4422a2dacd
--- /dev/null
+++ b/Documentation/hwmon/isl28022.rst
@@ -0,0 +1,63 @@ 
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver isl28022
+======================
+
+Supported chips:
+
+  * Renesas ISL28022
+
+    Prefix: 'isl28022'
+
+    Addresses scanned: none
+
+    Datasheet: Publicly available at the Renesas website
+
+	       https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf
+
+Author:
+    Carsten Spieß <mail@carsten-spiess.de>
+
+Description
+-----------
+
+The ISL28022 is a power monitor with I2C interface. The device monitors
+voltage, current via shunt resistor and calculated power.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+device explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The shunt value in micro-ohms, shunt voltage range and averaging can be set
+with device properties.
+Please refer to the Documentation/devicetree/bindings/hwmon/isl,isl28022.yaml
+for bindings if the device tree is used.
+
+The driver supports only shunt and bus continuous ADC mode at 15bit resolution.
+Averaging can be set from 1 to 128 samples (power of 2) on both channels.
+Shunt voltage range of 40, 80, 160 or 320mV is allowed
+The bus voltage range is 60V fixed.
+
+Sysfs entries
+-------------
+
+The following attributes are supported. All attributes are read-only.
+
+======================= =======================================================
+in0_input		bus voltage (milli Volt)
+
+curr1_input		current (milli Ampere)
+power1_input		power (micro Watt)
+======================= =======================================================
+
+Debugfs entries
+---------------
+
+The following attributes are supported. All attributes are read-only.
+
+======================= =======================================================
+shunt_voltage		shunt voltage (micro Volt)
+======================= =======================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 9407481c03a2..a1531c358423 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12080,6 +12080,8 @@  M:	Carsten Spieß <mail@carsten-spiess.de>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
+F:	Documentation/hwmon/isl28022.rst
+F:	drivers/hwmon/isl28022.c
 
 ISOFS FILESYSTEM
 M:	Jan Kara <jack@suse.cz>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 65ea92529406..ad0f8c0a9535 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -853,6 +853,17 @@  config SENSORS_CORETEMP
 	  sensor inside your CPU. Most of the family 6 CPUs
 	  are supported. Check Documentation/hwmon/coretemp.rst for details.
 
+config SENSORS_ISL28022
+	tristate "Renesas ISL28022"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for ISL28022 power monitor.
+	  Check Documentation/hwmon/isl28022.rst for details.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called isl28022.
+
 config SENSORS_IT87
 	tristate "ITE IT87xx and compatibles"
 	depends on HAS_IOPORT
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 9554d2fdcf7b..4ea6f7c95315 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -103,6 +103,7 @@  obj-$(CONFIG_SENSORS_INA2XX)	+= ina2xx.o
 obj-$(CONFIG_SENSORS_INA238)	+= ina238.o
 obj-$(CONFIG_SENSORS_INA3221)	+= ina3221.o
 obj-$(CONFIG_SENSORS_INTEL_M10_BMC_HWMON) += intel-m10-bmc-hwmon.o
+obj-$(CONFIG_SENSORS_ISL28022)	+= isl28022.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_JC42)	+= jc42.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
diff --git a/drivers/hwmon/isl28022.c b/drivers/hwmon/isl28022.c
new file mode 100644
index 000000000000..d7de8fbfe362
--- /dev/null
+++ b/drivers/hwmon/isl28022.c
@@ -0,0 +1,533 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * isl28022.c - driver for Renesas ISL28022 power monitor chip monitoring
+ *
+ * Copyright (c) 2023 Carsten Spieß <mail@carsten-spiess.de>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+/* ISL28022 registers */
+#define ISL28022_REG_CONFIG	0x00
+#define ISL28022_REG_SHUNT	0x01
+#define ISL28022_REG_BUS	0x02
+#define ISL28022_REG_POWER	0x03
+#define ISL28022_REG_CURRENT	0x04
+#define ISL28022_REG_CALIB	0x05
+#define ISL28022_REG_SHUNT_THR	0x06
+#define ISL28022_REG_BUS_THR	0x07
+#define ISL28022_REG_INT	0x08
+#define ISL28022_REG_AUX	0x09
+#define ISL28022_REG_MAX	ISL28022_REG_AUX
+
+/* ISL28022 config flags */
+/* mode flags */
+#define ISL28022_MODE_SHIFT	0
+#define ISL28022_MODE_MASK	0x0007
+
+#define ISL28022_MODE_PWR_DOWN	0x0
+#define ISL28022_MODE_TRG_S	0x1
+#define ISL28022_MODE_TRG_B	0x2
+#define ISL28022_MODE_TRG_SB	0x3
+#define ISL28022_MODE_ADC_OFF	0x4
+#define ISL28022_MODE_CONT_S	0x5
+#define ISL28022_MODE_CONT_B	0x6
+#define ISL28022_MODE_CONT_SB	0x7
+
+/* shunt ADC settings */
+#define ISL28022_SADC_SHIFT	3
+#define ISL28022_SADC_MASK	0x0078
+
+#define ISL28022_BADC_SHIFT	7
+#define ISL28022_BADC_MASK	0x0780
+
+#define ISL28022_ADC_12		0x0	/* 12 bit ADC */
+#define ISL28022_ADC_13		0x1	/* 13 bit ADC */
+#define ISL28022_ADC_14		0x2	/* 14 bit ADC */
+#define ISL28022_ADC_15		0x3	/* 15 bit ADC */
+#define ISL28022_ADC_15_1	0x8	/* 15 bit ADC, 1 sample */
+#define ISL28022_ADC_15_2	0x9	/* 15 bit ADC, 2 samples */
+#define ISL28022_ADC_15_4	0xA	/* 15 bit ADC, 4 samples */
+#define ISL28022_ADC_15_8	0xB	/* 15 bit ADC, 8 samples */
+#define ISL28022_ADC_15_16	0xC	/* 15 bit ADC, 16 samples */
+#define ISL28022_ADC_15_32	0xD	/* 15 bit ADC, 32 samples */
+#define ISL28022_ADC_15_64	0xE	/* 15 bit ADC, 64 samples */
+#define ISL28022_ADC_15_128	0xF	/* 15 bit ADC, 128 samples */
+
+/* shunt voltage range */
+#define ISL28022_PG_SHIFT	11
+#define ISL28022_PG_MASK	0x1800
+
+#define ISL28022_PG_40		0x0	/* +/-40 mV */
+#define ISL28022_PG_80		0x1	/* +/-80 mV */
+#define ISL28022_PG_160		0x2	/* +/-160 mV */
+#define ISL28022_PG_320		0x3	/* +/-3200 mV */
+
+/* bus voltage range */
+#define ISL28022_BRNG_SHIFT	13
+#define ISL28022_BRNG_MASK	0x6000
+
+#define ISL28022_BRNG_16	0x0	/* 16 V */
+#define ISL28022_BRNG_32	0x1	/* 32 V */
+#define ISL28022_BRNG_60	0x3	/* 60 V */
+
+/* reset */
+#define ISL28022_RESET		0x8000
+
+struct isl28022_data {
+	struct regmap		*regmap;
+	u32			shunt;
+	u32			gain;
+	u32			average;
+};
+
+static int isl28022_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct isl28022_data *data = dev_get_drvdata(dev);
+	unsigned int regval;
+	int err;
+	u16 sign_bit;
+
+	switch (channel) {
+	case 0:
+		switch (attr) {
+		case hwmon_in_input:
+			err = regmap_read(data->regmap,
+					  ISL28022_REG_BUS, &regval);
+			if (err < 0)
+				return err;
+			/* driver supports only 60V mode (BRNG 11) */
+			*val = (long)(((u16)regval) & 0xFFFC);
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	case 1:
+		switch (attr) {
+		case hwmon_in_input:
+			err = regmap_read(data->regmap,
+					  ISL28022_REG_SHUNT, &regval);
+			if (err < 0)
+				return err;
+			switch (data->gain) {
+			case 8:
+				sign_bit = (regval >> 15) & 0x01;
+				*val = (long)((((u16)regval) & 0x7FFF) -
+					(sign_bit * 32768)) / 100;
+				break;
+			case 4:
+				sign_bit = (regval >> 14) & 0x01;
+				*val = (long)((((u16)regval) & 0x3FFF) -
+					(sign_bit * 16384)) / 100;
+				break;
+			case 2:
+				sign_bit = (regval >> 13) & 0x01;
+				*val = (long)((((u16)regval) & 0x1FFF) -
+					(sign_bit * 8192)) / 100;
+				break;
+			case 1:
+				sign_bit = (regval >> 12) & 0x01;
+				*val = (long)((((u16)regval) & 0x0FFF) -
+					(sign_bit * 4096)) / 100;
+				break;
+			}
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int isl28022_read_current(struct device *dev, u32 attr, long *val)
+{
+	struct isl28022_data *data = dev_get_drvdata(dev);
+	unsigned int regval;
+	int err;
+
+	switch (attr) {
+	case hwmon_curr_input:
+		err = regmap_read(data->regmap,
+				  ISL28022_REG_CURRENT, &regval);
+		if (err < 0)
+			return err;
+		*val = ((long)regval * 1250L * (long)data->gain) /
+			(long)data->shunt;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int isl28022_read_power(struct device *dev, u32 attr, long *val)
+{
+	struct isl28022_data *data = dev_get_drvdata(dev);
+	unsigned int regval;
+	int err;
+
+	switch (attr) {
+	case hwmon_power_input:
+		err = regmap_read(data->regmap,
+				  ISL28022_REG_POWER, &regval);
+		if (err < 0)
+			return err;
+		*val = ((51200000L * ((long)data->gain)) /
+			(long)data->shunt) * (long)regval;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
+		       u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_in:
+		return isl28022_read_in(dev, attr, channel, val);
+	case hwmon_curr:
+		return isl28022_read_current(dev, attr, val);
+	case hwmon_power:
+		return isl28022_read_power(dev, attr, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static umode_t isl28022_is_visible(const void *data, enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+			return 0444;
+		default:
+			break;
+		}
+		break;
+	case hwmon_curr:
+		switch (attr) {
+		case hwmon_curr_input:
+			return 0444;
+		default:
+			break;
+		}
+		break;
+	case hwmon_power:
+		switch (attr) {
+		case hwmon_power_input:
+			return 0444;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const struct hwmon_channel_info *isl28022_info[] = {
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT,	/* channel 0: bus voltage (mV) */
+			   HWMON_I_INPUT),	/* channel 1: shunt voltage (mV) */
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT),	/* channel 1: current (mA) */
+	HWMON_CHANNEL_INFO(power,
+			   HWMON_P_INPUT),	/* channel 1: power (µW) */
+	NULL
+};
+
+static const struct hwmon_ops isl28022_hwmon_ops = {
+	.is_visible = isl28022_is_visible,
+	.read = isl28022_read,
+};
+
+static const struct hwmon_chip_info isl28022_chip_info = {
+	.ops = &isl28022_hwmon_ops,
+	.info = isl28022_info,
+};
+
+static bool isl28022_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL28022_REG_CONFIG:
+	case ISL28022_REG_CALIB:
+	case ISL28022_REG_SHUNT_THR:
+	case ISL28022_REG_BUS_THR:
+	case ISL28022_REG_INT:
+	case ISL28022_REG_AUX:
+		return true;
+	}
+
+	return false;
+}
+
+static bool isl28022_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL28022_REG_CONFIG:
+	case ISL28022_REG_SHUNT:
+	case ISL28022_REG_BUS:
+	case ISL28022_REG_POWER:
+	case ISL28022_REG_CURRENT:
+	case ISL28022_REG_INT:
+	case ISL28022_REG_AUX:
+		return true;
+	}
+	return true;
+}
+
+static const struct regmap_config isl28022_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = ISL28022_REG_MAX,
+	.writeable_reg = isl28022_is_writeable_reg,
+	.volatile_reg = isl28022_is_volatile_reg,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static int shunt_voltage_show(struct seq_file *seqf, void *unused)
+{
+	struct isl28022_data *data = seqf->private;
+	unsigned int regval;
+	int err;
+
+	err = regmap_read(data->regmap,
+			  ISL28022_REG_SHUNT, &regval);
+	if (err)
+		return err;
+
+	/* print shunt voltage in micro volt  */
+	seq_printf(seqf, "%d\n", regval * 10);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(shunt_voltage);
+
+static struct dentry *isl28022_debugfs_root;
+
+static void isl28022_debugfs_remove(void *res)
+{
+	debugfs_remove_recursive(res);
+}
+
+static void isl28022_debugfs_init(struct i2c_client *client, struct isl28022_data *data)
+{
+	char name[16];
+	struct dentry *debugfs;
+
+	scnprintf(name, sizeof(name), "%d-%04hx", client->adapter->nr, client->addr);
+
+	debugfs = debugfs_create_dir(name, isl28022_debugfs_root);
+	debugfs_create_file("shunt_voltage", 0444, debugfs, data, &shunt_voltage_fops);
+
+	devm_add_action_or_reset(&client->dev, isl28022_debugfs_remove, debugfs);
+}
+
+/*
+ * read property values and make consistency checks.
+ *
+ * following values for shunt range and resistor are allowed:
+ *   40 mV -> gain 1, shunt min.  800 micro ohms
+ *   80 mV -> gain 2, shunt min. 1600 micro ohms
+ *  160 mV -> gain 4, shunt min. 3200 micro ohms
+ *  320 mV -> gain 8, shunt min. 6400 micro ohms
+ */
+static int isl28022_read_properties(struct device *dev, struct isl28022_data *data)
+{
+	u32 val;
+	int err;
+
+	err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val);
+	if (err == -EINVAL)
+		val = 10000;
+	else if (err < 0)
+		return err;
+	data->shunt = val;
+
+	err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val);
+	if (err == -EINVAL)
+		val = 320000;
+	else if (err < 0)
+		return err;
+
+	switch (val) {
+	case 40000:
+		data->gain = 1;
+		if (data->shunt < 800)
+			goto shunt_invalid;
+		break;
+	case 80000:
+		data->gain = 2;
+		if (data->shunt < 1600)
+			goto shunt_invalid;
+		break;
+	case 160000:
+		data->gain = 4;
+		if (data->shunt < 3200)
+			goto shunt_invalid;
+		break;
+	case 320000:
+		data->gain = 8;
+		if (data->shunt < 6400)
+			goto shunt_invalid;
+		break;
+	default:
+		dev_err_probe(dev, "renesas,shunt-range-microvolt invalid value %d\n", val);
+		return -EINVAL;
+	}
+
+	err = device_property_read_u32(dev, "renesas,average-samples", &val);
+	if (err == -EINVAL)
+		val = 1;
+	else if (err < 0)
+		return err;
+	if (val > 128 || hweight32(val) != 1) {
+		dev_err_probe(dev, "renesas,average-samples invalid value %d\n", val);
+		return -EINVAL;
+	}
+	data->average = val;
+
+	return 0;
+
+shunt_invalid:
+	dev_err_probe(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt);
+	return -EINVAL;
+}
+
+/*
+ * write configuration and calibration registers
+ *
+ * The driver supports only shunt and bus continuous ADC mode at 15bit resolution
+ * with averaging from 1 to 128 samples (pow of 2) on both channels.
+ * Shunt voltage gain 1,2,4 or 8 is allowed.
+ * The bus voltage range is 60V fixed.
+ */
+static int isl28022_config(struct isl28022_data *data)
+{
+	int err;
+	u16 config;
+	u16 calib;
+
+	config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) |
+			(ISL28022_BRNG_60 << ISL28022_BRNG_SHIFT) |
+			(__ffs(data->gain) << ISL28022_PG_SHIFT) |
+			((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_SADC_SHIFT) |
+			((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_BADC_SHIFT);
+
+	calib = data->shunt ? 0x8000 / data->gain : 0;
+
+	err = regmap_write(data->regmap, ISL28022_REG_CONFIG, config);
+	if (err < 0)
+		return err;
+
+	return regmap_write(data->regmap, ISL28022_REG_CALIB, calib);
+}
+
+static int isl28022_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct isl28022_data *data;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+					 I2C_FUNC_SMBUS_BYTE_DATA |
+					 I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(struct isl28022_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	err = isl28022_read_properties(dev, data);
+	if (err)
+		return err;
+
+	data->regmap = devm_regmap_init_i2c(client, &isl28022_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	err = isl28022_config(data);
+	if (err)
+		return err;
+
+	isl28022_debugfs_init(client, data);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+							 data, &isl28022_chip_info, NULL);
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);
+	return 0;
+}
+
+static const struct i2c_device_id isl28022_ids[] = {
+	{ "isl28022", 0},
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, isl28022_ids);
+
+static const struct of_device_id __maybe_unused isl28022_of_match[] = {
+	{ .compatible = "renesas,isl28022"},
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(of, isl28022_of_match);
+
+static struct i2c_driver isl28022_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "isl28022",
+	},
+	.probe	= isl28022_probe,
+	.id_table	= isl28022_ids,
+};
+
+static int __init
+isl28022_init(void)
+{
+	int err;
+
+	isl28022_debugfs_root = debugfs_create_dir("isl28022", NULL);
+	err = i2c_add_driver(&isl28022_driver);
+	if (!err)
+		return 0;
+
+	debugfs_remove_recursive(isl28022_debugfs_root);
+	return err;
+}
+
+static void __exit
+isl28022_exit(void)
+{
+	i2c_del_driver(&isl28022_driver);
+	debugfs_remove_recursive(isl28022_debugfs_root);
+}
+
+module_init(isl28022_init);
+module_exit(isl28022_exit);
+
+MODULE_AUTHOR("Carsten Spieß <mail@carsten-spiess.de>");
+MODULE_DESCRIPTION("ISL28022 driver");
+MODULE_LICENSE("GPL");