diff mbox series

[v2,1/3] dt-bindings: net: Add T-HEAD dwmac support

Message ID 20240926-th1520-dwmac-v2-1-f34f28ad1dc9@tenstorrent.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Add the dwmac driver support for T-HEAD TH1520 SoC | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Drew Fustini Sept. 26, 2024, 6:15 p.m. UTC
From: Jisheng Zhang <jszhang@kernel.org>

Add documentation to describe T-HEAD dwmac.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[drew: change apb registers from syscon to second reg of gmac node]
[drew: rename compatible, add thead rx/tx internal delay properties]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
 .../devicetree/bindings/net/snps,dwmac.yaml        |   1 +
 .../devicetree/bindings/net/thead,th1520-gmac.yaml | 109 +++++++++++++++++++++
 MAINTAINERS                                        |   1 +
 3 files changed, 111 insertions(+)

Comments

Krzysztof Kozlowski Sept. 27, 2024, 9:34 a.m. UTC | #1
On Thu, Sep 26, 2024 at 11:15:50AM -0700, Drew Fustini wrote:
> From: Jisheng Zhang <jszhang@kernel.org>
> 
> Add documentation to describe T-HEAD dwmac.
> 
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> [drew: change apb registers from syscon to second reg of gmac node]
> [drew: rename compatible, add thead rx/tx internal delay properties]
> Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
> ---
>  .../devicetree/bindings/net/snps,dwmac.yaml        |   1 +
>  .../devicetree/bindings/net/thead,th1520-gmac.yaml | 109 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  3 files changed, 111 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 4e2ba1bf788c..474ade185033 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -99,6 +99,7 @@ properties:
>          - snps,dwxgmac-2.10
>          - starfive,jh7100-dwmac
>          - starfive,jh7110-dwmac
> +        - thead,th1520-gmac
>  
>    reg:
>      minItems: 1
> diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
> new file mode 100644
> index 000000000000..1070e891c025
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: T-HEAD TH1520 GMAC Ethernet controller
> +
> +maintainers:
> +  - Drew Fustini <dfustini@tenstorrent.com>
> +
> +description: |
> +  The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual
> +  https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
> +
> +  Features include
> +    - Compliant with IEEE802.3 Specification
> +    - IEEE 1588-2008 standard for precision networked clock synchronization
> +    - Supports 10/100/1000Mbps data transfer rate
> +    - Supports RGMII/MII interface
> +    - Preamble and start of frame data (SFD) insertion in Transmit path
> +    - Preamble and SFD deletion in the Receive path
> +    - Automatic CRC and pad generation options for receive frames
> +    - MDIO master interface for PHY device configuration and management
> +
> +  The GMAC Registers consists of two parts
> +    - APB registers are used to configure clock frequency/clock enable/clock
> +      direction/PHY interface type.
> +    - AHB registers are use to configure GMAC core (DesignWare Core part).
> +      GMAC core register consists of DMA registers and GMAC registers.
> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - thead,th1520-gmac
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - thead,th1520-gmac
> +      - const: snps,dwmac-3.70a
> +
> +  reg:
> +    items:
> +      - description: DesignWare GMAC IP core registers
> +      - description: GMAC APB registers
> +
> +  reg-names:
> +    items:
> +      - const: dwmac
> +      - const: apb
> +
> +  thead,rx-internal-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      RGMII receive clock delay. The value is used for the delay_ctrl
> +      field in GMAC_RXCLK_DELAY_CTRL. Units are not specified.

What do you mean by "unspecified units"? They are always specified,
hardware does not work randomly, e.g. once uses clock cycles, but next
time you run it will use picoseconds.

You also miss default (property is not required) and some sort of constraints.

> +
> +  thead,tx-internal-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      RGMII transmit clock delay. The value is used for the delay_ctrl
> +      field in GMAC_TXCLK_DELAY_CTRL. Units are not specified.

Best regards,
Krzysztof
Drew Fustini Sept. 27, 2024, 8:51 p.m. UTC | #2
On Fri, Sep 27, 2024 at 11:34:48AM +0200, Krzysztof Kozlowski wrote:
> On Thu, Sep 26, 2024 at 11:15:50AM -0700, Drew Fustini wrote:
> > From: Jisheng Zhang <jszhang@kernel.org>
> > 
> > Add documentation to describe T-HEAD dwmac.
> > 
> > Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> > Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> > [drew: change apb registers from syscon to second reg of gmac node]
> > [drew: rename compatible, add thead rx/tx internal delay properties]
> > Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
> > ---
> >  .../devicetree/bindings/net/snps,dwmac.yaml        |   1 +
> >  .../devicetree/bindings/net/thead,th1520-gmac.yaml | 109 +++++++++++++++++++++
> >  MAINTAINERS                                        |   1 +
> >  3 files changed, 111 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > index 4e2ba1bf788c..474ade185033 100644
> > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > @@ -99,6 +99,7 @@ properties:
> >          - snps,dwxgmac-2.10
> >          - starfive,jh7100-dwmac
> >          - starfive,jh7110-dwmac
> > +        - thead,th1520-gmac
> >  
> >    reg:
> >      minItems: 1
> > diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
> > new file mode 100644
> > index 000000000000..1070e891c025
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
> > @@ -0,0 +1,109 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: T-HEAD TH1520 GMAC Ethernet controller
> > +
> > +maintainers:
> > +  - Drew Fustini <dfustini@tenstorrent.com>
> > +
> > +description: |
> > +  The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual
> > +  https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
> > +
> > +  Features include
> > +    - Compliant with IEEE802.3 Specification
> > +    - IEEE 1588-2008 standard for precision networked clock synchronization
> > +    - Supports 10/100/1000Mbps data transfer rate
> > +    - Supports RGMII/MII interface
> > +    - Preamble and start of frame data (SFD) insertion in Transmit path
> > +    - Preamble and SFD deletion in the Receive path
> > +    - Automatic CRC and pad generation options for receive frames
> > +    - MDIO master interface for PHY device configuration and management
> > +
> > +  The GMAC Registers consists of two parts
> > +    - APB registers are used to configure clock frequency/clock enable/clock
> > +      direction/PHY interface type.
> > +    - AHB registers are use to configure GMAC core (DesignWare Core part).
> > +      GMAC core register consists of DMA registers and GMAC registers.
> > +
> > +select:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        enum:
> > +          - thead,th1520-gmac
> > +  required:
> > +    - compatible
> > +
> > +allOf:
> > +  - $ref: snps,dwmac.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - thead,th1520-gmac
> > +      - const: snps,dwmac-3.70a
> > +
> > +  reg:
> > +    items:
> > +      - description: DesignWare GMAC IP core registers
> > +      - description: GMAC APB registers
> > +
> > +  reg-names:
> > +    items:
> > +      - const: dwmac
> > +      - const: apb
> > +
> > +  thead,rx-internal-delay:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: |
> > +      RGMII receive clock delay. The value is used for the delay_ctrl
> > +      field in GMAC_RXCLK_DELAY_CTRL. Units are not specified.
> 
> What do you mean by "unspecified units"? They are always specified,
> hardware does not work randomly, e.g. once uses clock cycles, but next
> time you run it will use picoseconds.
> 
> You also miss default (property is not required) and some sort of constraints.

I should have stated that I don't know the units for delay_ctrl. The
5-bit field has a max value of 31 which seems far too small for
picoseconds. Unfortunately, the documentation from the SoC vendor does
not give anymore details about what the value represents.

Andrew Lunn replied [1] to my cover letter that it is best to hard code
the field to 0 (which is the hardware reset value) if I don't know what
the units are for delay_ctrl. The hardware that I have works okay with
delay_ctrl of 0, so it seems these new vendor properties are not needed.

Thanks,
Drew

[1] https://lore.kernel.org/lkml/5e379911-e3de-478c-b785-61dbcc9627b1@lunn.ch/
Krzysztof Kozlowski Sept. 28, 2024, 7:27 a.m. UTC | #3
On 27/09/2024 22:51, Drew Fustini wrote:
> On Fri, Sep 27, 2024 at 11:34:48AM +0200, Krzysztof Kozlowski wrote:
>> On Thu, Sep 26, 2024 at 11:15:50AM -0700, Drew Fustini wrote:
>>> From: Jisheng Zhang <jszhang@kernel.org>
>>>
>>> Add documentation to describe T-HEAD dwmac.
>>>
>>> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
>>> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
>>> [drew: change apb registers from syscon to second reg of gmac node]
>>> [drew: rename compatible, add thead rx/tx internal delay properties]
>>> Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
>>> ---
>>>  .../devicetree/bindings/net/snps,dwmac.yaml        |   1 +
>>>  .../devicetree/bindings/net/thead,th1520-gmac.yaml | 109 +++++++++++++++++++++
>>>  MAINTAINERS                                        |   1 +
>>>  3 files changed, 111 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
>>> index 4e2ba1bf788c..474ade185033 100644
>>> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
>>> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
>>> @@ -99,6 +99,7 @@ properties:
>>>          - snps,dwxgmac-2.10
>>>          - starfive,jh7100-dwmac
>>>          - starfive,jh7110-dwmac
>>> +        - thead,th1520-gmac
>>>  
>>>    reg:
>>>      minItems: 1
>>> diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
>>> new file mode 100644
>>> index 000000000000..1070e891c025
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
>>> @@ -0,0 +1,109 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: T-HEAD TH1520 GMAC Ethernet controller
>>> +
>>> +maintainers:
>>> +  - Drew Fustini <dfustini@tenstorrent.com>
>>> +
>>> +description: |
>>> +  The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual
>>> +  https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
>>> +
>>> +  Features include
>>> +    - Compliant with IEEE802.3 Specification
>>> +    - IEEE 1588-2008 standard for precision networked clock synchronization
>>> +    - Supports 10/100/1000Mbps data transfer rate
>>> +    - Supports RGMII/MII interface
>>> +    - Preamble and start of frame data (SFD) insertion in Transmit path
>>> +    - Preamble and SFD deletion in the Receive path
>>> +    - Automatic CRC and pad generation options for receive frames
>>> +    - MDIO master interface for PHY device configuration and management
>>> +
>>> +  The GMAC Registers consists of two parts
>>> +    - APB registers are used to configure clock frequency/clock enable/clock
>>> +      direction/PHY interface type.
>>> +    - AHB registers are use to configure GMAC core (DesignWare Core part).
>>> +      GMAC core register consists of DMA registers and GMAC registers.
>>> +
>>> +select:
>>> +  properties:
>>> +    compatible:
>>> +      contains:
>>> +        enum:
>>> +          - thead,th1520-gmac
>>> +  required:
>>> +    - compatible
>>> +
>>> +allOf:
>>> +  - $ref: snps,dwmac.yaml#
>>> +
>>> +properties:
>>> +  compatible:
>>> +    items:
>>> +      - enum:
>>> +          - thead,th1520-gmac
>>> +      - const: snps,dwmac-3.70a
>>> +
>>> +  reg:
>>> +    items:
>>> +      - description: DesignWare GMAC IP core registers
>>> +      - description: GMAC APB registers
>>> +
>>> +  reg-names:
>>> +    items:
>>> +      - const: dwmac
>>> +      - const: apb
>>> +
>>> +  thead,rx-internal-delay:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description: |
>>> +      RGMII receive clock delay. The value is used for the delay_ctrl
>>> +      field in GMAC_RXCLK_DELAY_CTRL. Units are not specified.
>>
>> What do you mean by "unspecified units"? They are always specified,
>> hardware does not work randomly, e.g. once uses clock cycles, but next
>> time you run it will use picoseconds.
>>
>> You also miss default (property is not required) and some sort of constraints.
> 
> I should have stated that I don't know the units for delay_ctrl. The
> 5-bit field has a max value of 31 which seems far too small for
> picoseconds. Unfortunately, the documentation from the SoC vendor does
> not give anymore details about what the value represents.
> 
> Andrew Lunn replied [1] to my cover letter that it is best to hard code
> the field to 0 (which is the hardware reset value) if I don't know what
> the units are for delay_ctrl. The hardware that I have works okay with
> delay_ctrl of 0, so it seems these new vendor properties are not needed.

Then just say that this is using register values directly.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 4e2ba1bf788c..474ade185033 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -99,6 +99,7 @@  properties:
         - snps,dwxgmac-2.10
         - starfive,jh7100-dwmac
         - starfive,jh7110-dwmac
+        - thead,th1520-gmac
 
   reg:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
new file mode 100644
index 000000000000..1070e891c025
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
@@ -0,0 +1,109 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 GMAC Ethernet controller
+
+maintainers:
+  - Drew Fustini <dfustini@tenstorrent.com>
+
+description: |
+  The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual
+  https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
+
+  Features include
+    - Compliant with IEEE802.3 Specification
+    - IEEE 1588-2008 standard for precision networked clock synchronization
+    - Supports 10/100/1000Mbps data transfer rate
+    - Supports RGMII/MII interface
+    - Preamble and start of frame data (SFD) insertion in Transmit path
+    - Preamble and SFD deletion in the Receive path
+    - Automatic CRC and pad generation options for receive frames
+    - MDIO master interface for PHY device configuration and management
+
+  The GMAC Registers consists of two parts
+    - APB registers are used to configure clock frequency/clock enable/clock
+      direction/PHY interface type.
+    - AHB registers are use to configure GMAC core (DesignWare Core part).
+      GMAC core register consists of DMA registers and GMAC registers.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - thead,th1520-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - thead,th1520-gmac
+      - const: snps,dwmac-3.70a
+
+  reg:
+    items:
+      - description: DesignWare GMAC IP core registers
+      - description: GMAC APB registers
+
+  reg-names:
+    items:
+      - const: dwmac
+      - const: apb
+
+  thead,rx-internal-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII receive clock delay. The value is used for the delay_ctrl
+      field in GMAC_RXCLK_DELAY_CTRL. Units are not specified.
+
+  thead,tx-internal-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII transmit clock delay. The value is used for the delay_ctrl
+      field in GMAC_TXCLK_DELAY_CTRL. Units are not specified.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gmac0: ethernet@e7070000 {
+        compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
+        reg = <0xe7070000 0x2000>, <0xec003000 0x1000>;
+        reg-names = "dwmac", "apb";
+        clocks = <&clk 1>, <&clk 2>;
+        clock-names = "stmmaceth", "pclk";
+        interrupts = <66>;
+        interrupt-names = "macirq";
+        phy-mode = "rgmii-id";
+        snps,fixed-burst;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,pbl = <32>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 3e18aefd1222..aaa24189de43 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19940,6 +19940,7 @@  L:	linux-riscv@lists.infradead.org
 S:	Maintained
 T:	git https://github.com/pdp7/linux.git
 F:	Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
+F:	Documentation/devicetree/bindings/net/thead,dwmac.yaml
 F:	Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
 F:	arch/riscv/boot/dts/thead/
 F:	drivers/clk/thead/clk-th1520-ap.c