Message ID | 20241001080056.784735-1-roypat@amazon.co.uk (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | secretmem: disable memfd_secret() if arch cannot set direct map | expand |
On Tue, Oct 01, 2024 at 09:00:41AM +0100, Patrick Roy wrote: > Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). > This is the case for example on some arm64 configurations, where marking > 4k PTEs in the direct map not present can only be done if the direct map > is set up at 4k granularity in the first place (as ARM's > break-before-make semantics do not easily allow breaking apart > large/gigantic pages). > > More precisely, on arm64 systems with !can_set_direct_map(), > set_direct_map_invalid_noflush() is a no-op, however it returns success > (0) instead of an error. This means that memfd_secret will seemingly > "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), > but it does not actually achieve its goal of removing its memory from > the direct map. > > Note that with this patch, memfd_secret() will start erroring on systems > where can_set_direct_map() returns false (arm64 with > CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and > CONFIG_KFENCE=n), but that still seems better than the current silent > failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most > arm64 systems actually have a working memfd_secret() and aren't be > affected. > > From going through the iterations of the original memfd_secret patch > series, it seems that disabling the syscall in these scenarios was the > intended behavior [1] (preferred over having > set_direct_map_invalid_noflush return an error as that would result in > SIGBUSes at page-fault time), however the check for it got dropped > between v16 [2] and v17 [3], when secretmem moved away from CMA > allocations. > > [1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/ > [2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t > [3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/ > > Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") > Signed-off-by: Patrick Roy <roypat@amazon.co.uk> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> > --- > mm/secretmem.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/mm/secretmem.c b/mm/secretmem.c > index 3afb5ad701e14..399552814fd0f 100644 > --- a/mm/secretmem.c > +++ b/mm/secretmem.c > @@ -238,7 +238,7 @@ SYSCALL_DEFINE1(memfd_secret, unsigned int, flags) > /* make sure local flags do not confict with global fcntl.h */ > BUILD_BUG_ON(SECRETMEM_FLAGS_MASK & O_CLOEXEC); > > - if (!secretmem_enable) > + if (!secretmem_enable || !can_set_direct_map()) > return -ENOSYS; > > if (flags & ~(SECRETMEM_FLAGS_MASK | O_CLOEXEC)) > @@ -280,7 +280,7 @@ static struct file_system_type secretmem_fs = { > > static int __init secretmem_init(void) > { > - if (!secretmem_enable) > + if (!secretmem_enable || !can_set_direct_map()) > return 0; > > secretmem_mnt = kern_mount(&secretmem_fs); > > base-commit: abf2050f51fdca0fd146388f83cddd95a57a008d > -- > 2.46.2 >
On Tue, 1 Oct 2024 09:00:41 +0100 Patrick Roy <roypat@amazon.co.uk> wrote: > Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). > This is the case for example on some arm64 configurations, where marking > 4k PTEs in the direct map not present can only be done if the direct map > is set up at 4k granularity in the first place (as ARM's > break-before-make semantics do not easily allow breaking apart > large/gigantic pages). > > More precisely, on arm64 systems with !can_set_direct_map(), > set_direct_map_invalid_noflush() is a no-op, however it returns success > (0) instead of an error. This means that memfd_secret will seemingly > "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), > but it does not actually achieve its goal of removing its memory from > the direct map. > > Note that with this patch, memfd_secret() will start erroring on systems > where can_set_direct_map() returns false (arm64 with > CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and > CONFIG_KFENCE=n), but that still seems better than the current silent > failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most > arm64 systems actually have a working memfd_secret() and aren't be > affected. > > >From going through the iterations of the original memfd_secret patch > series, it seems that disabling the syscall in these scenarios was the > intended behavior [1] (preferred over having > set_direct_map_invalid_noflush return an error as that would result in > SIGBUSes at page-fault time), however the check for it got dropped > between v16 [2] and v17 [3], when secretmem moved away from CMA > allocations. > > [1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/ > [2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t > [3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/ Thanks. > Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") So I'm thinking this fix should be backported into kernels which contain 1507f51255c9, agree?
On Tue, Oct 01, 2024 at 03:04:38PM -0700, Andrew Morton wrote: > On Tue, 1 Oct 2024 09:00:41 +0100 Patrick Roy <roypat@amazon.co.uk> wrote: > > > Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). > > This is the case for example on some arm64 configurations, where marking > > 4k PTEs in the direct map not present can only be done if the direct map > > is set up at 4k granularity in the first place (as ARM's > > break-before-make semantics do not easily allow breaking apart > > large/gigantic pages). > > > > More precisely, on arm64 systems with !can_set_direct_map(), > > set_direct_map_invalid_noflush() is a no-op, however it returns success > > (0) instead of an error. This means that memfd_secret will seemingly > > "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), > > but it does not actually achieve its goal of removing its memory from > > the direct map. > > > > Note that with this patch, memfd_secret() will start erroring on systems > > where can_set_direct_map() returns false (arm64 with > > CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and > > CONFIG_KFENCE=n), but that still seems better than the current silent > > failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most > > arm64 systems actually have a working memfd_secret() and aren't be > > affected. > > > > >From going through the iterations of the original memfd_secret patch > > series, it seems that disabling the syscall in these scenarios was the > > intended behavior [1] (preferred over having > > set_direct_map_invalid_noflush return an error as that would result in > > SIGBUSes at page-fault time), however the check for it got dropped > > between v16 [2] and v17 [3], when secretmem moved away from CMA > > allocations. > > > > [1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/ > > [2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t > > [3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/ > > Thanks. > > > Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") > > So I'm thinking this fix should be backported into kernels which > contain 1507f51255c9, agree? Yes
diff --git a/mm/secretmem.c b/mm/secretmem.c index 3afb5ad701e14..399552814fd0f 100644 --- a/mm/secretmem.c +++ b/mm/secretmem.c @@ -238,7 +238,7 @@ SYSCALL_DEFINE1(memfd_secret, unsigned int, flags) /* make sure local flags do not confict with global fcntl.h */ BUILD_BUG_ON(SECRETMEM_FLAGS_MASK & O_CLOEXEC); - if (!secretmem_enable) + if (!secretmem_enable || !can_set_direct_map()) return -ENOSYS; if (flags & ~(SECRETMEM_FLAGS_MASK | O_CLOEXEC)) @@ -280,7 +280,7 @@ static struct file_system_type secretmem_fs = { static int __init secretmem_init(void) { - if (!secretmem_enable) + if (!secretmem_enable || !can_set_direct_map()) return 0; secretmem_mnt = kern_mount(&secretmem_fs);
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This is the case for example on some arm64 configurations, where marking 4k PTEs in the direct map not present can only be done if the direct map is set up at 4k granularity in the first place (as ARM's break-before-make semantics do not easily allow breaking apart large/gigantic pages). More precisely, on arm64 systems with !can_set_direct_map(), set_direct_map_invalid_noflush() is a no-op, however it returns success (0) instead of an error. This means that memfd_secret will seemingly "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), but it does not actually achieve its goal of removing its memory from the direct map. Note that with this patch, memfd_secret() will start erroring on systems where can_set_direct_map() returns false (arm64 with CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and CONFIG_KFENCE=n), but that still seems better than the current silent failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most arm64 systems actually have a working memfd_secret() and aren't be affected. From going through the iterations of the original memfd_secret patch series, it seems that disabling the syscall in these scenarios was the intended behavior [1] (preferred over having set_direct_map_invalid_noflush return an error as that would result in SIGBUSes at page-fault time), however the check for it got dropped between v16 [2] and v17 [3], when secretmem moved away from CMA allocations. [1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/ [2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t [3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/ Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Patrick Roy <roypat@amazon.co.uk> --- mm/secretmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) base-commit: abf2050f51fdca0fd146388f83cddd95a57a008d