| Message ID | 20241001210403.43535-3-ziyao@disroot.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Neil Armstrong |
| Headers | show |
| Series | meson/drm: Support drm_panic | expand |
Hi ! On 01/10/2024 23:04, Yao Zi wrote: > This patch implements drm_plane_helper_funcs.get_scanout_buffer for > primary plane, enabling meson-drm to work with drm_panic. > > This implementation tries to use current framebuffer as scanout buffer. > In case of AFBC enabled, we disable the decoder path and adjust OSD1 > parameters in get_scanout_buffer to make the buffer linear. > > Tested on TTY and Wayland session (Sway). Thanks for enabling this! > > Signed-off-by: Yao Zi <ziyao@disroot.org> > --- > drivers/gpu/drm/meson/meson_plane.c | 47 +++++++++++++++++++++++++++-- > 1 file changed, 44 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c > index b43ac61201f3..b2def784c00d 100644 > --- a/drivers/gpu/drm/meson/meson_plane.c > +++ b/drivers/gpu/drm/meson/meson_plane.c > @@ -20,6 +20,8 @@ > #include <drm/drm_framebuffer.h> > #include <drm/drm_gem_atomic_helper.h> > #include <drm/drm_gem_dma_helper.h> > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_panic.h> > > #include "meson_plane.h" > #include "meson_registers.h" > @@ -419,10 +421,49 @@ static void meson_plane_atomic_disable(struct drm_plane *plane, > priv->viu.osd1_enabled = false; > } > > +static int meson_plane_get_scanout_buffer(struct drm_plane *plane, > + struct drm_scanout_buffer *sb) > +{ > + struct meson_plane *meson_plane = to_meson_plane(plane); > + struct meson_drm *priv = meson_plane->priv; > + struct drm_framebuffer *fb; > + > + if (!meson_plane->enabled) > + return -ENODEV; > + > + if (priv->viu.osd1_afbcd) { > + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) { This should be meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A) You should call: if (priv->afbcd.ops) { priv->afbcd.ops->reset(priv); priv->afbcd.ops->disable(priv); } > + writel_relaxed(0, priv->io_base + > + _REG(VIU_OSD1_BLK1_CFG_W4)); > + writel_relaxed(0, priv->io_base + > + _REG(VIU_OSD1_BLK2_CFG_W4)); > + writel_bits_relaxed(OSD_ENDIANNESS_LE, OSD_ENDIANNESS_LE, > + priv->io_base + > + _REG(VIU_OSD1_BLK0_CFG_W0)); This won't work, drop it, the canvas isn't correctly configured, you should instead call: meson_canvas_config(priv->canvas, priv->canvas_id_osd1, priv->viu.osd1_addr, priv->viu.osd1_stride, priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE, MESON_CANVAS_BLKMODE_LINEAR, 0); > + meson_viu_g12a_disable_osd1_afbc(priv); > + } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) { And here meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) > + writel_bits_relaxed(OSD_DPATH_MALI_AFBCD, 0, > + priv->io_base + > + _REG(VIU_OSD1_CTRL_STAT2)); Ok, you should also call meson_canvas_config() You should call: if (priv->afbcd.ops) { priv->afbcd.ops->reset(priv); priv->afbcd.ops->disable(priv); } > + meson_viu_gxm_disable_osd1_afbc(priv); > + } > + } I thing the code should look like: if (priv->viu.osd1_afbcd) { meson_canvas_config(priv->canvas, priv->canvas_id_osd1, priv->viu.osd1_addr, priv->viu.osd1_stride, priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE, MESON_CANVAS_BLKMODE_LINEAR, 0); if (priv->afbcd.ops) { priv->afbcd.ops->reset(priv); priv->afbcd.ops->disable(priv); } if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) { writel_bits_relaxed(OSD_ENDIANNESS_LE, OSD_ENDIANNESS_LE, priv->io_base + _REG(VIU_OSD1_BLK0_CFG_W0)); meson_viu_g12a_disable_osd1_afbc(priv); } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) { writel_bits_relaxed(OSD_DPATH_MALI_AFBCD, 0, priv->io_base + _REG(VIU_OSD1_CTRL_STAT2)); meson_viu_gxm_disable_osd1_afbc(priv); } } AFBC is quite hard to test since it requires DRM_FORMAT_XBGR8888, but I think sway should perhaps support it, Mesa should also support AFBC. At some point I made some memory dumps of AFBC buffers, perhaps they could be useful here. Another way would be to simply ignore the AFBC case, and bail out since it would be a very rare case. > + > + fb = plane->state->fb; > + sb->format = fb->format; > + sb->width = fb->width; > + sb->height = fb->height; > + sb->pitch[0] = fb->pitches[0]; > + drm_gem_fb_vmap(fb, sb->map, NULL); > + > + return 0; > +} > + > static const struct drm_plane_helper_funcs meson_plane_helper_funcs = { > - .atomic_check = meson_plane_atomic_check, > - .atomic_disable = meson_plane_atomic_disable, > - .atomic_update = meson_plane_atomic_update, > + .atomic_check = meson_plane_atomic_check, > + .atomic_disable = meson_plane_atomic_disable, > + .atomic_update = meson_plane_atomic_update, > + .get_scanout_buffer = meson_plane_get_scanout_buffer, > }; > > static bool meson_plane_format_mod_supported(struct drm_plane *plane, Thanks, Neil
On Wed, Oct 02, 2024 at 09:59:57AM +0200, Neil Armstrong wrote: > I thing the code should look like: > > if (priv->viu.osd1_afbcd) { > meson_canvas_config(priv->canvas, priv->canvas_id_osd1, > priv->viu.osd1_addr, > priv->viu.osd1_stride, > priv->viu.osd1_height, > MESON_CANVAS_WRAP_NONE, > MESON_CANVAS_BLKMODE_LINEAR, 0); > > if (priv->afbcd.ops) { > priv->afbcd.ops->reset(priv); > priv->afbcd.ops->disable(priv); > } > > if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) { > writel_bits_relaxed(OSD_ENDIANNESS_LE, OSD_ENDIANNESS_LE, > priv->io_base + > _REG(VIU_OSD1_BLK0_CFG_W0)); > meson_viu_g12a_disable_osd1_afbc(priv); > } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) { > writel_bits_relaxed(OSD_DPATH_MALI_AFBCD, 0, > priv->io_base + > _REG(VIU_OSD1_CTRL_STAT2)); > meson_viu_gxm_disable_osd1_afbc(priv); > } > } Thanks for correction! > AFBC is quite hard to test since it requires DRM_FORMAT_XBGR8888, but > I think sway should perhaps support it, Mesa should also support AFBC. Have tried with Sway 1.9 and weston 14.0.0 and didn't find a way to make them create buffers with AFBC modifiers. modetest util in libdrm doesn't support it either. > At some point I made some memory dumps of AFBC buffers, perhaps they could > be useful here. > > Another way would be to simply ignore the AFBC case, and bail out since > it would be a very rare case. I'm not sure the use case of an AFBC-enabled primary plane. It should be rare the whole primary plane is filled with pixel data from GPU or video codec. If my guess is true, bailing out when AFBC is enabled should be acceptable. Will try to do some AFBC tests if possible and consider it as a latest solution. btw, I forget to check whether drm_gem_fb_vmap() succeeds. Will fix it later. Thanks for your advice again! Best regards, Yao Zi
+ Jocelyn On Wed, Oct 02, 2024 at 09:59:57AM GMT, Neil Armstrong wrote: > > diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c > > index b43ac61201f3..b2def784c00d 100644 > > --- a/drivers/gpu/drm/meson/meson_plane.c > > +++ b/drivers/gpu/drm/meson/meson_plane.c > > @@ -20,6 +20,8 @@ > > #include <drm/drm_framebuffer.h> > > #include <drm/drm_gem_atomic_helper.h> > > #include <drm/drm_gem_dma_helper.h> > > +#include <drm/drm_gem_framebuffer_helper.h> > > +#include <drm/drm_panic.h> > > #include "meson_plane.h" > > #include "meson_registers.h" > > @@ -419,10 +421,49 @@ static void meson_plane_atomic_disable(struct drm_plane *plane, > > priv->viu.osd1_enabled = false; > > } > > +static int meson_plane_get_scanout_buffer(struct drm_plane *plane, > > + struct drm_scanout_buffer *sb) > > +{ > > + struct meson_plane *meson_plane = to_meson_plane(plane); > > + struct meson_drm *priv = meson_plane->priv; > > + struct drm_framebuffer *fb; > > + > > + if (!meson_plane->enabled) > > + return -ENODEV; > > + > > + if (priv->viu.osd1_afbcd) { > > + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) { > > This should be meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A) > > You should call: > > if (priv->afbcd.ops) { > priv->afbcd.ops->reset(priv); > priv->afbcd.ops->disable(priv); > } I'm not sure it's a good idea. This code is run in the panic path, and it comes with strict requirements that these functions don't have. It'll be incredibly easy to add a sleeping call or a lock in there. On a more fundamental level, I'm not sure we should be disableing AFBC at all. Do we even have the guarantee that the buffer is large enough to hold XRGB8888 pixels? Maxime
Hi, On 02/10/2024 13:02, Maxime Ripard wrote: > + Jocelyn > > On Wed, Oct 02, 2024 at 09:59:57AM GMT, Neil Armstrong wrote: >>> diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c >>> index b43ac61201f3..b2def784c00d 100644 >>> --- a/drivers/gpu/drm/meson/meson_plane.c >>> +++ b/drivers/gpu/drm/meson/meson_plane.c >>> @@ -20,6 +20,8 @@ >>> #include <drm/drm_framebuffer.h> >>> #include <drm/drm_gem_atomic_helper.h> >>> #include <drm/drm_gem_dma_helper.h> >>> +#include <drm/drm_gem_framebuffer_helper.h> >>> +#include <drm/drm_panic.h> >>> #include "meson_plane.h" >>> #include "meson_registers.h" >>> @@ -419,10 +421,49 @@ static void meson_plane_atomic_disable(struct drm_plane *plane, >>> priv->viu.osd1_enabled = false; >>> } >>> +static int meson_plane_get_scanout_buffer(struct drm_plane *plane, >>> + struct drm_scanout_buffer *sb) >>> +{ >>> + struct meson_plane *meson_plane = to_meson_plane(plane); >>> + struct meson_drm *priv = meson_plane->priv; >>> + struct drm_framebuffer *fb; >>> + >>> + if (!meson_plane->enabled) >>> + return -ENODEV; >>> + >>> + if (priv->viu.osd1_afbcd) { >>> + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) { >> >> This should be meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A) >> >> You should call: >> >> if (priv->afbcd.ops) { >> priv->afbcd.ops->reset(priv); >> priv->afbcd.ops->disable(priv); >> } > > I'm not sure it's a good idea. This code is run in the panic path, and > it comes with strict requirements that these functions don't have. > > It'll be incredibly easy to add a sleeping call or a lock in there. > > On a more fundamental level, I'm not sure we should be disableing AFBC > at all. Do we even have the guarantee that the buffer is large enough to > hold XRGB8888 pixels? Yes it does, "compressed" is in he way pixels are ordered in memory, meaning it will be faster to scanout when the image is simple, but with a fully random image the buffer will be larger. But per my comment, AFBC is really only used on Android producst since it requires DRM_FORMAT_XBGR8888, so the best is to bail out when AFBC is enabled. Neil > > Maxime
diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index b43ac61201f3..b2def784c00d 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -20,6 +20,8 @@ #include <drm/drm_framebuffer.h> #include <drm/drm_gem_atomic_helper.h> #include <drm/drm_gem_dma_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_panic.h> #include "meson_plane.h" #include "meson_registers.h" @@ -419,10 +421,49 @@ static void meson_plane_atomic_disable(struct drm_plane *plane, priv->viu.osd1_enabled = false; } +static int meson_plane_get_scanout_buffer(struct drm_plane *plane, + struct drm_scanout_buffer *sb) +{ + struct meson_plane *meson_plane = to_meson_plane(plane); + struct meson_drm *priv = meson_plane->priv; + struct drm_framebuffer *fb; + + if (!meson_plane->enabled) + return -ENODEV; + + if (priv->viu.osd1_afbcd) { + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) { + writel_relaxed(0, priv->io_base + + _REG(VIU_OSD1_BLK1_CFG_W4)); + writel_relaxed(0, priv->io_base + + _REG(VIU_OSD1_BLK2_CFG_W4)); + writel_bits_relaxed(OSD_ENDIANNESS_LE, OSD_ENDIANNESS_LE, + priv->io_base + + _REG(VIU_OSD1_BLK0_CFG_W0)); + meson_viu_g12a_disable_osd1_afbc(priv); + } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) { + writel_bits_relaxed(OSD_DPATH_MALI_AFBCD, 0, + priv->io_base + + _REG(VIU_OSD1_CTRL_STAT2)); + meson_viu_gxm_disable_osd1_afbc(priv); + } + } + + fb = plane->state->fb; + sb->format = fb->format; + sb->width = fb->width; + sb->height = fb->height; + sb->pitch[0] = fb->pitches[0]; + drm_gem_fb_vmap(fb, sb->map, NULL); + + return 0; +} + static const struct drm_plane_helper_funcs meson_plane_helper_funcs = { - .atomic_check = meson_plane_atomic_check, - .atomic_disable = meson_plane_atomic_disable, - .atomic_update = meson_plane_atomic_update, + .atomic_check = meson_plane_atomic_check, + .atomic_disable = meson_plane_atomic_disable, + .atomic_update = meson_plane_atomic_update, + .get_scanout_buffer = meson_plane_get_scanout_buffer, }; static bool meson_plane_format_mod_supported(struct drm_plane *plane,
This patch implements drm_plane_helper_funcs.get_scanout_buffer for primary plane, enabling meson-drm to work with drm_panic. This implementation tries to use current framebuffer as scanout buffer. In case of AFBC enabled, we disable the decoder path and adjust OSD1 parameters in get_scanout_buffer to make the buffer linear. Tested on TTY and Wayland session (Sway). Signed-off-by: Yao Zi <ziyao@disroot.org> --- drivers/gpu/drm/meson/meson_plane.c | 47 +++++++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 3 deletions(-)