| Message ID | 20240930195322.461209-1-jacek.lawrynowicz@linux.intel.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | accel/ivpu: Fixes for 6.12-rc1 | expand |
Applied to drm-misc-fixes On 9/30/2024 9:52 PM, Jacek Lawrynowicz wrote: > Most notable changes are coredump and tracing support. > The rest are stability fixes, some refactoring and typos. > > Changes in v2: > - Fix typos in FW API headers > - Split fw refactor commit into 2 commits and improved commit messages > - Fixed commit messages for state dump and power island commits > - Added limit and NULL termination for FW version string > - Documented sched_mode sysfs file > > > Andrzej Kacprowski (4): > accel/ivpu: Update VPU FW API headers > accel/ivpu: Allow reading dvfs_mode debugfs file > accel/ivpu: Add test_mode bit to force turbo > accel/ivpu: Fix reset_engine debugfs file logic > > Jacek Lawrynowicz (11): > accel/ivpu: Rename ivpu_log_level to fw_log_level > accel/ivpu: Refactor functions in ivpu_fw_log.c > accel/ivpu: Fix fw log printing > accel/ivpu: Limit FW version string length > accel/ivpu: Stop using hardcoded DRIVER_DATE > accel/ivpu: Add auto selection logic for job scheduler > accel/ivpu: Remove invalid warnings > accel/ivpu: Increase MS info buffer size > accel/ivpu: Fix ivpu_jsm_dyndbg_control() > accel/ivpu: Remove HWS_EXTRA_EVENTS from test modes > accel/ivpu: Fix typos in ivpu_pm.c > > Jakub Pawlak (1): > accel/ivpu: Add tracing for IPC/PM/JOB > > Karol Wachowski (12): > accel/ivpu: Add coredump support > accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLE > accel/ivpu: Turn on autosuspend on Simics > accel/ivpu: Add FW version debugfs entry > accel/ivpu: Remove 1-tile power up Simics workaround > accel/ivpu: Add one jiffy to bo_wait_ioctl timeout value > accel/ivpu: Print JSM message result in case of error > accel/ivpu: Remove skip of clock own resource ack on Simics > accel/ivpu: Prevent recovery invocation during probe and resume > accel/ivpu: Refactor failure diagnostics during boot > accel/ivpu: Do not fail on cmdq if failed to allocate preemption > buffers > accel/ivpu: Use whole user and shave ranges for preemption buffers > > Tomasz Rusinowicz (3): > accel/ivpu: Reset fw log on cold boot > accel/ivpu: Add FW state dump on TDR > accel/ivpu: Make DB_ID and JOB_ID allocations incremental > > drivers/accel/ivpu/Kconfig | 1 + > drivers/accel/ivpu/Makefile | 6 +- > drivers/accel/ivpu/ivpu_coredump.c | 39 ++++ > drivers/accel/ivpu/ivpu_coredump.h | 25 ++ > drivers/accel/ivpu/ivpu_debugfs.c | 86 +++---- > drivers/accel/ivpu/ivpu_drv.c | 52 +++-- > drivers/accel/ivpu/ivpu_drv.h | 13 +- > drivers/accel/ivpu/ivpu_fw.c | 26 ++- > drivers/accel/ivpu/ivpu_fw.h | 9 +- > drivers/accel/ivpu/ivpu_fw_log.c | 113 +++++---- > drivers/accel/ivpu/ivpu_fw_log.h | 17 +- > drivers/accel/ivpu/ivpu_gem.c | 3 + > drivers/accel/ivpu/ivpu_hw.c | 5 +- > drivers/accel/ivpu/ivpu_hw.h | 1 - > drivers/accel/ivpu/ivpu_hw_btrs.c | 9 - > drivers/accel/ivpu/ivpu_hw_ip.c | 8 +- > drivers/accel/ivpu/ivpu_ipc.c | 45 ++-- > drivers/accel/ivpu/ivpu_ipc.h | 9 +- > drivers/accel/ivpu/ivpu_job.c | 102 +++++---- > drivers/accel/ivpu/ivpu_jsm_msg.c | 34 +-- > drivers/accel/ivpu/ivpu_jsm_msg.h | 2 + > drivers/accel/ivpu/ivpu_ms.c | 2 +- > drivers/accel/ivpu/ivpu_pm.c | 24 +- > drivers/accel/ivpu/ivpu_sysfs.c | 24 ++ > drivers/accel/ivpu/ivpu_trace.h | 73 ++++++ > drivers/accel/ivpu/ivpu_trace_points.c | 9 + > drivers/accel/ivpu/vpu_boot_api.h | 45 ++-- > drivers/accel/ivpu/vpu_jsm_api.h | 303 +++++++++++++++++++++---- > include/uapi/drm/ivpu_accel.h | 3 - > 29 files changed, 797 insertions(+), 291 deletions(-) > create mode 100644 drivers/accel/ivpu/ivpu_coredump.c > create mode 100644 drivers/accel/ivpu/ivpu_coredump.h > create mode 100644 drivers/accel/ivpu/ivpu_trace.h > create mode 100644 drivers/accel/ivpu/ivpu_trace_points.c > > -- > 2.45.1
Hi Am 02.10.24 um 15:26 schrieb Jacek Lawrynowicz: > Applied to drm-misc-fixes And removed from drm-misc-fixes. The -misc-fixes branch is for fixing bugs that either regressed working code or to resolve serious bugs that affects upstream users. It is NOT a dumping ground for all kinds of things you want to get into upstream quickly. Your review process should have found these issues already. Best regards Thomas > > On 9/30/2024 9:52 PM, Jacek Lawrynowicz wrote: >> Most notable changes are coredump and tracing support. >> The rest are stability fixes, some refactoring and typos. >> >> Changes in v2: >> - Fix typos in FW API headers >> - Split fw refactor commit into 2 commits and improved commit messages >> - Fixed commit messages for state dump and power island commits >> - Added limit and NULL termination for FW version string >> - Documented sched_mode sysfs file >> >> >> Andrzej Kacprowski (4): >> accel/ivpu: Update VPU FW API headers >> accel/ivpu: Allow reading dvfs_mode debugfs file >> accel/ivpu: Add test_mode bit to force turbo >> accel/ivpu: Fix reset_engine debugfs file logic >> >> Jacek Lawrynowicz (11): >> accel/ivpu: Rename ivpu_log_level to fw_log_level >> accel/ivpu: Refactor functions in ivpu_fw_log.c >> accel/ivpu: Fix fw log printing >> accel/ivpu: Limit FW version string length >> accel/ivpu: Stop using hardcoded DRIVER_DATE >> accel/ivpu: Add auto selection logic for job scheduler >> accel/ivpu: Remove invalid warnings >> accel/ivpu: Increase MS info buffer size >> accel/ivpu: Fix ivpu_jsm_dyndbg_control() >> accel/ivpu: Remove HWS_EXTRA_EVENTS from test modes >> accel/ivpu: Fix typos in ivpu_pm.c >> >> Jakub Pawlak (1): >> accel/ivpu: Add tracing for IPC/PM/JOB >> >> Karol Wachowski (12): >> accel/ivpu: Add coredump support >> accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLE >> accel/ivpu: Turn on autosuspend on Simics >> accel/ivpu: Add FW version debugfs entry >> accel/ivpu: Remove 1-tile power up Simics workaround >> accel/ivpu: Add one jiffy to bo_wait_ioctl timeout value >> accel/ivpu: Print JSM message result in case of error >> accel/ivpu: Remove skip of clock own resource ack on Simics >> accel/ivpu: Prevent recovery invocation during probe and resume >> accel/ivpu: Refactor failure diagnostics during boot >> accel/ivpu: Do not fail on cmdq if failed to allocate preemption >> buffers >> accel/ivpu: Use whole user and shave ranges for preemption buffers >> >> Tomasz Rusinowicz (3): >> accel/ivpu: Reset fw log on cold boot >> accel/ivpu: Add FW state dump on TDR >> accel/ivpu: Make DB_ID and JOB_ID allocations incremental >> >> drivers/accel/ivpu/Kconfig | 1 + >> drivers/accel/ivpu/Makefile | 6 +- >> drivers/accel/ivpu/ivpu_coredump.c | 39 ++++ >> drivers/accel/ivpu/ivpu_coredump.h | 25 ++ >> drivers/accel/ivpu/ivpu_debugfs.c | 86 +++---- >> drivers/accel/ivpu/ivpu_drv.c | 52 +++-- >> drivers/accel/ivpu/ivpu_drv.h | 13 +- >> drivers/accel/ivpu/ivpu_fw.c | 26 ++- >> drivers/accel/ivpu/ivpu_fw.h | 9 +- >> drivers/accel/ivpu/ivpu_fw_log.c | 113 +++++---- >> drivers/accel/ivpu/ivpu_fw_log.h | 17 +- >> drivers/accel/ivpu/ivpu_gem.c | 3 + >> drivers/accel/ivpu/ivpu_hw.c | 5 +- >> drivers/accel/ivpu/ivpu_hw.h | 1 - >> drivers/accel/ivpu/ivpu_hw_btrs.c | 9 - >> drivers/accel/ivpu/ivpu_hw_ip.c | 8 +- >> drivers/accel/ivpu/ivpu_ipc.c | 45 ++-- >> drivers/accel/ivpu/ivpu_ipc.h | 9 +- >> drivers/accel/ivpu/ivpu_job.c | 102 +++++---- >> drivers/accel/ivpu/ivpu_jsm_msg.c | 34 +-- >> drivers/accel/ivpu/ivpu_jsm_msg.h | 2 + >> drivers/accel/ivpu/ivpu_ms.c | 2 +- >> drivers/accel/ivpu/ivpu_pm.c | 24 +- >> drivers/accel/ivpu/ivpu_sysfs.c | 24 ++ >> drivers/accel/ivpu/ivpu_trace.h | 73 ++++++ >> drivers/accel/ivpu/ivpu_trace_points.c | 9 + >> drivers/accel/ivpu/vpu_boot_api.h | 45 ++-- >> drivers/accel/ivpu/vpu_jsm_api.h | 303 +++++++++++++++++++++---- >> include/uapi/drm/ivpu_accel.h | 3 - >> 29 files changed, 797 insertions(+), 291 deletions(-) >> create mode 100644 drivers/accel/ivpu/ivpu_coredump.c >> create mode 100644 drivers/accel/ivpu/ivpu_coredump.h >> create mode 100644 drivers/accel/ivpu/ivpu_trace.h >> create mode 100644 drivers/accel/ivpu/ivpu_trace_points.c >> >> -- >> 2.45.1
Hi, On 10/2/2024 4:51 PM, Thomas Zimmermann wrote: > Hi > > Am 02.10.24 um 15:26 schrieb Jacek Lawrynowicz: >> Applied to drm-misc-fixes > > And removed from drm-misc-fixes. :( > The -misc-fixes branch is for fixing bugs that either regressed working code or to resolve serious bugs that affects upstream users. It is NOT a dumping ground for all kinds of things you want to get into upstream quickly. Your review process should have found these issues already. Sorry about this. I guess I allowed my upstreaming backlog to grow beyond sensible size. I will apply small subset of these patches to -fixes and the rest to -next. Regards, Jacek
Most notable changes are coredump and tracing support. The rest are stability fixes, some refactoring and typos. Changes in v2: - Fix typos in FW API headers - Split fw refactor commit into 2 commits and improved commit messages - Fixed commit messages for state dump and power island commits - Added limit and NULL termination for FW version string - Documented sched_mode sysfs file Andrzej Kacprowski (4): accel/ivpu: Update VPU FW API headers accel/ivpu: Allow reading dvfs_mode debugfs file accel/ivpu: Add test_mode bit to force turbo accel/ivpu: Fix reset_engine debugfs file logic Jacek Lawrynowicz (11): accel/ivpu: Rename ivpu_log_level to fw_log_level accel/ivpu: Refactor functions in ivpu_fw_log.c accel/ivpu: Fix fw log printing accel/ivpu: Limit FW version string length accel/ivpu: Stop using hardcoded DRIVER_DATE accel/ivpu: Add auto selection logic for job scheduler accel/ivpu: Remove invalid warnings accel/ivpu: Increase MS info buffer size accel/ivpu: Fix ivpu_jsm_dyndbg_control() accel/ivpu: Remove HWS_EXTRA_EVENTS from test modes accel/ivpu: Fix typos in ivpu_pm.c Jakub Pawlak (1): accel/ivpu: Add tracing for IPC/PM/JOB Karol Wachowski (12): accel/ivpu: Add coredump support accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLE accel/ivpu: Turn on autosuspend on Simics accel/ivpu: Add FW version debugfs entry accel/ivpu: Remove 1-tile power up Simics workaround accel/ivpu: Add one jiffy to bo_wait_ioctl timeout value accel/ivpu: Print JSM message result in case of error accel/ivpu: Remove skip of clock own resource ack on Simics accel/ivpu: Prevent recovery invocation during probe and resume accel/ivpu: Refactor failure diagnostics during boot accel/ivpu: Do not fail on cmdq if failed to allocate preemption buffers accel/ivpu: Use whole user and shave ranges for preemption buffers Tomasz Rusinowicz (3): accel/ivpu: Reset fw log on cold boot accel/ivpu: Add FW state dump on TDR accel/ivpu: Make DB_ID and JOB_ID allocations incremental drivers/accel/ivpu/Kconfig | 1 + drivers/accel/ivpu/Makefile | 6 +- drivers/accel/ivpu/ivpu_coredump.c | 39 ++++ drivers/accel/ivpu/ivpu_coredump.h | 25 ++ drivers/accel/ivpu/ivpu_debugfs.c | 86 +++---- drivers/accel/ivpu/ivpu_drv.c | 52 +++-- drivers/accel/ivpu/ivpu_drv.h | 13 +- drivers/accel/ivpu/ivpu_fw.c | 26 ++- drivers/accel/ivpu/ivpu_fw.h | 9 +- drivers/accel/ivpu/ivpu_fw_log.c | 113 +++++---- drivers/accel/ivpu/ivpu_fw_log.h | 17 +- drivers/accel/ivpu/ivpu_gem.c | 3 + drivers/accel/ivpu/ivpu_hw.c | 5 +- drivers/accel/ivpu/ivpu_hw.h | 1 - drivers/accel/ivpu/ivpu_hw_btrs.c | 9 - drivers/accel/ivpu/ivpu_hw_ip.c | 8 +- drivers/accel/ivpu/ivpu_ipc.c | 45 ++-- drivers/accel/ivpu/ivpu_ipc.h | 9 +- drivers/accel/ivpu/ivpu_job.c | 102 +++++---- drivers/accel/ivpu/ivpu_jsm_msg.c | 34 +-- drivers/accel/ivpu/ivpu_jsm_msg.h | 2 + drivers/accel/ivpu/ivpu_ms.c | 2 +- drivers/accel/ivpu/ivpu_pm.c | 24 +- drivers/accel/ivpu/ivpu_sysfs.c | 24 ++ drivers/accel/ivpu/ivpu_trace.h | 73 ++++++ drivers/accel/ivpu/ivpu_trace_points.c | 9 + drivers/accel/ivpu/vpu_boot_api.h | 45 ++-- drivers/accel/ivpu/vpu_jsm_api.h | 303 +++++++++++++++++++++---- include/uapi/drm/ivpu_accel.h | 3 - 29 files changed, 797 insertions(+), 291 deletions(-) create mode 100644 drivers/accel/ivpu/ivpu_coredump.c create mode 100644 drivers/accel/ivpu/ivpu_coredump.h create mode 100644 drivers/accel/ivpu/ivpu_trace.h create mode 100644 drivers/accel/ivpu/ivpu_trace_points.c -- 2.45.1