@@ -31,6 +31,7 @@ TEST_PROGS += nft_tproxy_tcp.sh
TEST_PROGS += nft_tproxy_udp.sh
TEST_PROGS += nft_zones_many.sh
TEST_PROGS += rpath.sh
+TEST_PROGS += vxlan_mtu_frag.sh
TEST_PROGS += xt_string.sh
TEST_PROGS_EXTENDED = nft_concat_range_perf.sh
@@ -7,6 +7,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_NETFILTER=m
CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_CGROUP_BPF=y
CONFIG_DUMMY=m
CONFIG_INET_ESP=m
@@ -84,6 +85,7 @@ CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_TPROXY=m
CONFIG_VETH=m
CONFIG_VLAN_8021Q=m
+CONFIG_VXLAN=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_PKTGEN=m
new file mode 100755
@@ -0,0 +1,121 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+source lib.sh
+
+if ! modprobe -q -n br_netfilter 2>&1; then
+ echo "SKIP: Test needs br_netfilter kernel module"
+ exit $ksft_skip
+fi
+
+cleanup()
+{
+ cleanup_all_ns
+}
+
+trap cleanup EXIT
+
+setup_ns host vtep router
+
+create_topology()
+{
+ ip link add host-eth0 netns "$host" type veth peer name vtep-host netns "$vtep"
+ ip link add vtep-router netns "$vtep" type veth peer name router-vtep netns "$router"
+}
+
+setup_host()
+{
+ # bring ports up
+ ip -n "$host" addr add 10.0.0.1/24 dev host-eth0
+ ip -n "$host" link set host-eth0 up
+
+ # Add VLAN 10,20
+ for vid in 10 20; do
+ ip -n "$host" link add link host-eth0 name host-eth0.$vid type vlan id $vid
+ ip -n "$host" addr add 10.0.$vid.1/24 dev host-eth0.$vid
+ ip -n "$host" link set host-eth0.$vid up
+ done
+}
+
+setup_vtep()
+{
+ # create bridge on vtep
+ ip -n "$vtep" link add name br0 type bridge
+ ip -n "$vtep" link set br0 type bridge vlan_filtering 1
+
+ # VLAN 10 is untagged PVID
+ ip -n "$vtep" link set dev vtep-host master br0
+ bridge -n "$vtep" vlan add dev vtep-host vid 10 pvid untagged
+
+ # VLAN 20 as other VID
+ ip -n "$vtep" link set dev vtep-host master br0
+ bridge -n "$vtep" vlan add dev vtep-host vid 20
+
+ # single-vxlan device on vtep
+ ip -n "$vtep" address add dev vtep-router 60.0.0.1/24
+ ip -n "$vtep" link add dev vxd type vxlan external \
+ vnifilter local 60.0.0.1 remote 60.0.0.2 dstport 4789 ttl 64
+ ip -n "$vtep" link set vxd master br0
+
+ # Add VLAN-VNI 1-1 mappings
+ bridge -n "$vtep" link set dev vxd vlan_tunnel on
+ for vid in 10 20; do
+ bridge -n "$vtep" vlan add dev vxd vid $vid
+ bridge -n "$vtep" vlan add dev vxd vid $vid tunnel_info id $vid
+ bridge -n "$vtep" vni add dev vxd vni $vid
+ done
+
+ # bring ports up
+ ip -n "$vtep" link set vxd up
+ ip -n "$vtep" link set vtep-router up
+ ip -n "$vtep" link set vtep-host up
+ ip -n "$vtep" link set dev br0 up
+}
+
+setup_router()
+{
+ # bring ports up
+ ip -n "$router" link set router-vtep up
+}
+
+setup()
+{
+ modprobe -q br_netfilter
+ create_topology
+ setup_host
+ setup_vtep
+ setup_router
+}
+
+test_large_mtu_untagged_traffic()
+{
+ ip -n "$vtep" link set vxd mtu 1000
+ ip -n "$host" neigh add 10.0.0.2 lladdr ca:fe:ba:be:00:01 dev host-eth0
+ ip netns exec "$host" \
+ ping -q 10.0.0.2 -I host-eth0 -c 1 -W 0.5 -s2000 > /dev/null 2>&1
+ return 0
+}
+
+test_large_mtu_tagged_traffic()
+{
+ for vid in 10 20; do
+ ip -n "$vtep" link set vxd mtu 1000
+ ip -n "$host" neigh add 10.0.$vid.2 lladdr ca:fe:ba:be:00:01 dev host-eth0.$vid
+ ip netns exec "$host" \
+ ping -q 10.0.$vid.2 -I host-eth0.$vid -c 1 -W 0.5 -s2000 > /dev/null 2>&1
+ done
+ return 0
+}
+
+do_test()
+{
+ # Frames will be dropped so ping will not succeed
+ # If it doesn't panic, it passes
+ test_large_mtu_tagged_traffic
+ test_large_mtu_untagged_traffic
+}
+
+setup && \
+echo "Test for VxLAN fragmentation with large MTU in br_netfilter:" && \
+do_test && echo "PASS!"
+exit $?