@@ -80,7 +80,7 @@ simple-audio-card,codec {
};
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -22,7 +22,7 @@ memory@60000000 {
reg = <0x60000000 0x40000000>;
};
- vdd_log: vdd-log {
+ vdd_log: regulator-vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm3 0 1000>;
regulator-name = "vdd_log";
@@ -34,7 +34,7 @@ vdd_log: vdd-log {
status = "okay";
};
- vcc_sd0: fixed-regulator {
+ vcc_sd0: regulator-fixed {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
@@ -19,7 +19,7 @@ memory@60000000 {
reg = <0x60000000 0x40000000>;
};
- vdd_log: vdd-log {
+ vdd_log: regulator-vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm3 0 1000>;
regulator-name = "vdd_log";
@@ -31,7 +31,7 @@ vdd_log: vdd-log {
status = "okay";
};
- vcc_sd0: sdmmc-regulator {
+ vcc_sd0: regulator-sdmmc {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
@@ -41,7 +41,7 @@ vcc_sd0: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vsys: vsys-regulator {
+ vsys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -61,21 +61,21 @@ hdmi_con_in: endpoint {
};
};
- vcc_2v5: vcc-2v5 {
+ vcc_2v5: regulator-vcc-2v5 {
compatible = "regulator-fixed";
regulator-name = "vcc_2v5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
- vcc_io: vcc-io {
+ vcc_io: regulator-vcc-io {
compatible = "regulator-fixed";
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- vcc_host: usb-host-regulator {
+ vcc_host: regulator-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -89,7 +89,7 @@ vcc_host: usb-host-regulator {
vin-supply = <&vcc_io>;
};
- vcc_otg: usb-otg-regulator {
+ vcc_otg: regulator-usb-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
@@ -103,7 +103,7 @@ vcc_otg: usb-otg-regulator {
vin-supply = <&vcc_io>;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc_pwr>;
@@ -115,7 +115,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_wifi: sdio-regulator {
+ vcc_wifi: regulator-sdio {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
@@ -42,7 +42,7 @@ key-power {
};
};
- vdd_log: vdd-log {
+ vdd_log: regulator-vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm3 0 1000>;
regulator-name = "vdd_log";
@@ -54,7 +54,7 @@ vdd_log: vdd-log {
status = "okay";
};
- vsys: vsys-regulator {
+ vsys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -64,7 +64,7 @@ vsys: vsys-regulator {
};
/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
- vcc_stdby: stdby-regulator {
+ vcc_stdby: regulator-stdby {
compatible = "regulator-fixed";
regulator-name = "5v_stdby";
regulator-min-microvolt = <5000000>;
@@ -73,7 +73,7 @@ vcc_stdby: stdby-regulator {
regulator-boot-on;
};
- vcc_emmc: emmc-regulator {
+ vcc_emmc: regulator-emmc {
compatible = "regulator-fixed";
regulator-name = "emmc_vccq";
regulator-min-microvolt = <3000000>;
@@ -81,7 +81,7 @@ vcc_emmc: emmc-regulator {
vin-supply = <&vsys>;
};
- vcc_sata: sata-regulator {
+ vcc_sata: regulator-sata {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -94,7 +94,7 @@ vcc_sata: sata-regulator {
vin-supply = <&vcc_stdby>;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -106,7 +106,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_host: usb-host-regulator {
+ vcc_host: regulator-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -119,7 +119,7 @@ vcc_host: usb-host-regulator {
vin-supply = <&vcc_stdby>;
};
- vcc_otg: usb-otg-regulator {
+ vcc_otg: regulator-usb-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
@@ -24,7 +24,7 @@ memory@60000000 {
reg = <0x60000000 0x40000000>;
};
- vcc5v0_otg: vcc5v0-otg-regulator {
+ vcc5v0_otg: regulator-vcc5v0-otg {
compatible = "regulator-fixed";
gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -34,7 +34,7 @@ vcc5v0_otg: vcc5v0-otg-regulator {
regulator-max-microvolt = <5000000>;
};
- vcc5v0_host: vcc5v0-host-regulator {
+ vcc5v0_host: regulator-vcc5v0-host {
compatible = "regulator-fixed";
gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -38,7 +38,7 @@ button-recovery {
};
};
- dc_5v: dc-5v-regulator {
+ dc_5v: regulator-dc-5v {
compatible = "regulator-fixed";
regulator-name = "DC_5V";
regulator-min-microvolt = <5000000>;
@@ -62,7 +62,7 @@ hdmi_connector_in: endpoint {
* This is a vbus-supply, which also supplies the GL852G usb hub,
* thus has to be always-on
*/
- host_pwr_5v: host-pwr-5v-regulator {
+ host_pwr_5v: regulator-host-pwr-5v {
compatible = "regulator-fixed";
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <1500>;
@@ -111,7 +111,7 @@ led-spd {
};
};
- mcu3v3: mcu3v3-regulator {
+ mcu3v3: regulator-mcu3v3 {
compatible = "regulator-fixed";
regulator-name = "MCU3V3";
regulator-min-microvolt = <3300000>;
@@ -121,7 +121,7 @@ mcu3v3: mcu3v3-regulator {
regulator-boot-on;
};
- vcc_ddr: vcc-ddr-regulator {
+ vcc_ddr: regulator-vcc-ddr {
compatible = "regulator-fixed";
regulator-name = "VCC_DDR";
regulator-min-microvolt = <1500000>;
@@ -131,7 +131,7 @@ vcc_ddr: vcc-ddr-regulator {
regulator-boot-on;
};
- vcc_io: vcc-io-regulator {
+ vcc_io: regulator-vcc-io {
compatible = "regulator-fixed";
regulator-name = "VCC_IO";
regulator-min-microvolt = <3300000>;
@@ -141,7 +141,7 @@ vcc_io: vcc-io-regulator {
regulator-boot-on;
};
- vcc_lan: vcc-lan-regulator {
+ vcc_lan: regulator-vcc-lan {
compatible = "regulator-fixed";
regulator-name = "VCC_LAN";
regulator-min-microvolt = <3300000>;
@@ -151,7 +151,7 @@ vcc_lan: vcc-lan-regulator {
regulator-boot-on;
};
- vcc_sd: vcc-sd-regulator {
+ vcc_sd: regulator-vcc-sd {
compatible = "regulator-fixed";
gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
startup-delay-us = <500>;
@@ -163,7 +163,7 @@ vcc_sd: vcc-sd-regulator {
pinctrl-0 = <&sdmmc_pwren>;
};
- vcc_sys: vcc-sys-regulator {
+ vcc_sys: regulator-vcc-sys {
compatible = "regulator-fixed";
regulator-name = "VCC_SYS";
regulator-min-microvolt = <5000000>;
@@ -173,7 +173,7 @@ vcc_sys: vcc-sys-regulator {
regulator-boot-on;
};
- vcc33_hdmi: vcc33-hdmi-regulator {
+ vcc33_hdmi: regulator-vcc33-hdmi {
compatible = "regulator-fixed";
regulator-name = "VCC33_HDMI";
regulator-min-microvolt = <3300000>;
@@ -183,7 +183,7 @@ vcc33_hdmi: vcc33-hdmi-regulator {
regulator-boot-on;
};
- vcca_33: vcca-33-regulator {
+ vcca_33: regulator-vcca-33 {
compatible = "regulator-fixed";
regulator-name = "VCCA_33";
regulator-min-microvolt = <3300000>;
@@ -193,7 +193,7 @@ vcca_33: vcca-33-regulator {
regulator-boot-on;
};
- vdd_11: vdd-11-regulator {
+ vdd_11: regulator-vdd-11 {
compatible = "regulator-fixed";
regulator-name = "VDD_11";
regulator-min-microvolt = <1100000>;
@@ -203,7 +203,7 @@ vdd_11: vdd-11-regulator {
regulator-boot-on;
};
- vdd11_hdmi: vdd11-hdmi-regulator {
+ vdd11_hdmi: regulator-vdd11-hdmi {
compatible = "regulator-fixed";
regulator-name = "VDD11_HDMI";
regulator-min-microvolt = <1100000>;
@@ -213,7 +213,7 @@ vdd11_hdmi: vdd11-hdmi-regulator {
regulator-boot-on;
};
- vdd_arm: vdd-arm-regulator {
+ vdd_arm: regulator-vdd-arm {
compatible = "pwm-regulator";
regulator-name = "VDD_ARM";
pwms = <&pwm1 0 25000 1>;
@@ -231,7 +231,7 @@ vdd_arm: vdd-arm-regulator {
* driver does not implement regulator support we have to make
* sure here that the voltage never drops below 1050 mV.
*/
- vdd_log: vdd-log-regulator {
+ vdd_log: regulator-vdd-log {
compatible = "pwm-regulator";
regulator-name = "VDD_LOG";
pwms = <&pwm2 0 25000 1>;
@@ -130,7 +130,7 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
};
- avdd_cif: cif-avdd-regulator {
+ avdd_cif: regulator-cif-avdd {
compatible = "regulator-fixed";
regulator-name = "avdd-cif";
regulator-min-microvolt = <2800000>;
@@ -142,7 +142,7 @@ avdd_cif: cif-avdd-regulator {
vin-supply = <&vcc28_cif>;
};
- vcc_5v: vcc-5v-regulator {
+ vcc_5v: regulator-vcc-5v {
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
@@ -154,7 +154,7 @@ vcc_5v: vcc-5v-regulator {
vin-supply = <&vsys>;
};
- vcc_lcd: lcd-regulator {
+ vcc_lcd: regulator-lcd {
compatible = "regulator-fixed";
regulator-name = "vcc-lcd";
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
@@ -164,7 +164,7 @@ vcc_lcd: lcd-regulator {
vin-supply = <&vcc_io>;
};
- vcc_otg: usb-otg-regulator {
+ vcc_otg: regulator-usb-otg {
compatible = "regulator-fixed";
regulator-name = "vcc-otg";
regulator-min-microvolt = <5000000>;
@@ -177,7 +177,7 @@ vcc_otg: usb-otg-regulator {
vin-supply = <&vcc_5v>;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
regulator-name = "vcc-sd";
regulator-min-microvolt = <3300000>;
@@ -189,7 +189,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vccq_emmc: emmc-vccq-regulator {
+ vccq_emmc: regulator-emmc-vccq {
compatible = "regulator-fixed";
regulator-name = "vccq-emmc";
regulator-min-microvolt = <2800000>;
@@ -198,7 +198,7 @@ vccq_emmc: emmc-vccq-regulator {
};
/* supplied from the bq24196 */
- vsys: vsys-regulator {
+ vsys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -39,7 +39,7 @@ key-power {
};
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -78,7 +78,7 @@ ir_recv: ir-receiver {
pinctrl-0 = <&ir_recv_pin>;
};
- vcc_otg: usb-otg-regulator {
+ vcc_otg: regulator-usb-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
@@ -91,7 +91,7 @@ vcc_otg: usb-otg-regulator {
regulator-boot-on;
};
- vcc_sd0: sdmmc-regulator {
+ vcc_sd0: regulator-sdmmc {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
@@ -103,7 +103,7 @@ vcc_sd0: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_host: usb-host-regulator {
+ vcc_host: regulator-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -116,7 +116,7 @@ vcc_host: usb-host-regulator {
regulator-boot-on;
};
- vsys: vsys-regulator {
+ vsys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -17,7 +17,7 @@ memory@60000000 {
reg = <0x60000000 0x40000000>;
};
- vcc_phy: vcc-phy-regulator {
+ vcc_phy: regulator-vcc-phy {
compatible = "regulator-fixed";
enable-active-high;
regulator-name = "vcc_phy";
@@ -18,7 +18,7 @@ memory@60000000 {
reg = <0x60000000 0x40000000>;
};
- dc_12v: dc-12v-regulator {
+ dc_12v: regulator-dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
@@ -34,7 +34,7 @@ ext_gmac: ext_gmac {
#clock-cells = <0>;
};
- vcc_host: vcc-host-regulator {
+ vcc_host: regulator-vcc-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
@@ -46,7 +46,7 @@ vcc_host: vcc-host-regulator {
vin-supply = <&vcc_sys>;
};
- vcc_phy: vcc-phy-regulator {
+ vcc_phy: regulator-vcc-phy {
compatible = "regulator-fixed";
enable-active-high;
regulator-name = "vcc_phy";
@@ -57,7 +57,7 @@ vcc_phy: vcc-phy-regulator {
vin-supply = <&vccio_1v8>;
};
- vcc_sys: vcc-sys-regulator {
+ vcc_sys: regulator-vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
@@ -67,7 +67,7 @@ vcc_sys: vcc-sys-regulator {
vin-supply = <&dc_12v>;
};
- vccio_1v8: vccio-1v8-regulator {
+ vccio_1v8: regulator-vccio-1v8 {
compatible = "regulator-fixed";
regulator-name = "vccio_1v8";
regulator-min-microvolt = <1800000>;
@@ -76,7 +76,7 @@ vccio_1v8: vccio-1v8-regulator {
vin-supply = <&vcc_sys>;
};
- vccio_3v3: vccio-3v3-regulator {
+ vccio_3v3: regulator-vccio-3v3 {
compatible = "regulator-fixed";
regulator-name = "vccio_3v3";
regulator-min-microvolt = <3300000>;
@@ -85,7 +85,7 @@ vccio_3v3: vccio-3v3-regulator {
vin-supply = <&vcc_sys>;
};
- vdd_arm: vdd-arm-regulator {
+ vdd_arm: regulator-vdd-arm {
compatible = "pwm-regulator";
pwms = <&pwm1 0 25000 1>;
pwm-supply = <&vcc_sys>;
@@ -96,7 +96,7 @@ vdd_arm: vdd-arm-regulator {
regulator-boot-on;
};
- vdd_log: vdd-log-regulator {
+ vdd_log: regulator-vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
pwm-supply = <&vcc_sys>;
@@ -20,7 +20,7 @@ memory@60000000 {
reg = <0x60000000 0x40000000>;
};
- dc_12v: dc-12v-regulator {
+ dc_12v: regulator-dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
@@ -51,7 +51,7 @@ sdio_pwrseq: sdio-pwrseq {
<&gpio2 29 GPIO_ACTIVE_LOW>;
};
- vcc_host: vcc-host-regulator {
+ vcc_host: regulator-vcc-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
@@ -63,7 +63,7 @@ vcc_host: vcc-host-regulator {
vin-supply = <&vcc_sys>;
};
- vcc_phy: vcc-phy-regulator {
+ vcc_phy: regulator-vcc-phy {
compatible = "regulator-fixed";
enable-active-high;
regulator-name = "vcc_phy";
@@ -74,7 +74,7 @@ vcc_phy: vcc-phy-regulator {
vin-supply = <&vccio_1v8>;
};
- vcc_sys: vcc-sys-regulator {
+ vcc_sys: regulator-vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
@@ -84,7 +84,7 @@ vcc_sys: vcc-sys-regulator {
vin-supply = <&dc_12v>;
};
- vccio_1v8: vccio-1v8-regulator {
+ vccio_1v8: regulator-vccio-1v8 {
compatible = "regulator-fixed";
regulator-name = "vccio_1v8";
regulator-min-microvolt = <1800000>;
@@ -93,7 +93,7 @@ vccio_1v8: vccio-1v8-regulator {
vin-supply = <&vcc_sys>;
};
- vccio_3v3: vccio-3v3-regulator {
+ vccio_3v3: regulator-vccio-3v3 {
compatible = "regulator-fixed";
regulator-name = "vccio_3v3";
regulator-min-microvolt = <3300000>;
@@ -102,7 +102,7 @@ vccio_3v3: vccio-3v3-regulator {
vin-supply = <&vcc_sys>;
};
- vdd_arm: vdd-arm-regulator {
+ vdd_arm: regulator-vdd-arm {
compatible = "pwm-regulator";
pwms = <&pwm1 0 25000 1>;
pwm-supply = <&vcc_sys>;
@@ -113,7 +113,7 @@ vdd_arm: vdd-arm-regulator {
regulator-boot-on;
};
- vdd_log: vdd-log-regulator {
+ vdd_log: regulator-vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
pwm-supply = <&vcc_sys>;
@@ -7,7 +7,7 @@ / {
model = "Rockchip RK3288 EVB ACT8846";
compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
- vcc_lcd: vcc-lcd {
+ vcc_lcd: regulator-vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -17,7 +17,7 @@ vcc_lcd: vcc-lcd {
vin-supply = <&vcc_io>;
};
- vcc_wl: vcc-wl {
+ vcc_wl: regulator-vcc-wl {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -129,7 +129,7 @@ key-power {
};
/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
- vcc_host: vcc-host-regulator {
+ vcc_host: regulator-vcc-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -140,7 +140,7 @@ vcc_host: vcc-host-regulator {
regulator-boot-on;
};
- vcc_phy: vcc-phy-regulator {
+ vcc_phy: regulator-vcc-phy {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -153,7 +153,7 @@ vcc_phy: vcc-phy-regulator {
regulator-boot-on;
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -167,7 +167,7 @@ vcc_sys: vsys-regulator {
* vcc_io directly. Those boards won't be able to power cycle SD cards
* but it shouldn't hurt to toggle this pin there anyway.
*/
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -21,7 +21,7 @@ ext_gmac: external-gmac-clock {
};
- vcc_flash: flash-regulator {
+ vcc_flash: regulator-flash {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
@@ -85,7 +85,7 @@ spdif_out: spdif-out {
#sound-dai-cells = <0>;
};
- vcc_host_5v: usb-host-regulator {
+ vcc_host_5v: regulator-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -98,7 +98,7 @@ vcc_host_5v: usb-host-regulator {
vin-supply = <&vcc_5v>;
};
- vcc_5v: vcc_sys: vsys-regulator {
+ vcc_5v: vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-min-microvolt = <5000000>;
@@ -107,7 +107,7 @@ vcc_5v: vcc_sys: vsys-regulator {
regulator-boot-on;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -119,7 +119,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_otg_5v: usb-otg-regulator {
+ vcc_otg_5v: regulator-usb-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -132,7 +132,7 @@ vcc_otg_5v: usb-otg-regulator {
vin-supply = <&vcc_5v>;
};
- dovdd_1v8: dovdd-1v8-regulator {
+ dovdd_1v8: regulator-dovdd-1v8 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -144,7 +144,7 @@ dovdd_1v8: dovdd-1v8-regulator {
vin-supply = <&vcc_io>;
};
- vcc28_dvp: vcc28-dvp-regulator {
+ vcc28_dvp: regulator-vcc28-dvp {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -156,7 +156,7 @@ vcc28_dvp: vcc28-dvp-regulator {
vin-supply = <&vcc_io>;
};
- af_28: af_28-regulator {
+ af_28: regulator-af-28 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -168,7 +168,7 @@ af_28: af_28-regulator {
vin-supply = <&vcc_io>;
};
- dvdd_1v2: af_28-regulator {
+ dvdd_1v2: regulator-dvdd-1v2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -180,7 +180,7 @@ dvdd_1v2: af_28-regulator {
vin-supply = <&vcc_io>;
};
- vbat_wl: wifi-regulator {
+ vbat_wl: regulator-wifi {
compatible = "regulator-fixed";
regulator-name = "vbat_wl";
regulator-min-microvolt = <3300000>;
@@ -25,7 +25,7 @@ button-recovery {
};
};
- dovdd_1v8: dovdd-1v8-regulator {
+ dovdd_1v8: regulator-dovdd-1v8 {
compatible = "regulator-fixed";
regulator-name = "dovdd_1v8";
regulator-min-microvolt = <1800000>;
@@ -79,7 +79,7 @@ power_led: led-1 {
};
};
- vbat_wl: vcc_sys: vsys-regulator {
+ vbat_wl: vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -88,7 +88,7 @@ vbat_wl: vcc_sys: vsys-regulator {
regulator-boot-on;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -100,7 +100,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_flash: flash-regulator {
+ vcc_flash: regulator-flash {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
@@ -108,7 +108,7 @@ vcc_flash: flash-regulator {
vin-supply = <&vcc_io>;
};
- vcc_5v: usb-regulator {
+ vcc_5v: regulator-usb {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-min-microvolt = <5000000>;
@@ -118,7 +118,7 @@ vcc_5v: usb-regulator {
vin-supply = <&vcc_sys>;
};
- vcc_host_5v: usb-host-regulator {
+ vcc_host_5v: regulator-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -131,7 +131,7 @@ vcc_host_5v: usb-host-regulator {
vin-supply = <&vcc_5v>;
};
- vcc_otg_5v: usb-otg-regulator {
+ vcc_otg_5v: regulator-usb-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -148,7 +148,7 @@ vcc_otg_5v: usb-otg-regulator {
* A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
* by the dvp_pwr pin.
*/
- vcc28_dvp: vcc28-dvp-regulator {
+ vcc28_dvp: regulator-vcc28-dvp {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -37,7 +37,7 @@ work_led: led-0 {
};
};
- vcc_flash: flash-regulator {
+ vcc_flash: regulator-flash {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
@@ -45,7 +45,7 @@ vcc_flash: flash-regulator {
vin-supply = <&vcc_io>;
};
- vcc_host: usb-host-regulator {
+ vcc_host: regulator-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -58,7 +58,7 @@ vcc_host: usb-host-regulator {
vin-supply = <&vcc_sys>;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -70,7 +70,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -35,7 +35,7 @@ button-1 {
};
};
- vcc_host0_5v: usb-host0-regulator {
+ vcc_host0_5v: regulator-usb-host0 {
compatible = "regulator-fixed";
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -47,7 +47,7 @@ vcc_host0_5v: usb-host0-regulator {
vin-supply = <&vdd_in_otg_out>;
};
- vcc_host1_5v: usb-host1-regulator {
+ vcc_host1_5v: regulator-usb-host1 {
compatible = "regulator-fixed";
gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -59,7 +59,7 @@ vcc_host1_5v: usb-host1-regulator {
vin-supply = <&vdd_in_otg_out>;
};
- vcc_otg_5v: usb-otg-regulator {
+ vcc_otg_5v: regulator-usb-otg {
compatible = "regulator-fixed";
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -46,7 +46,7 @@ user_led: led-0 {
};
};
- vdd_emmc_io: vdd-emmc-io {
+ vdd_emmc_io: regulator-vdd-emmc-io {
compatible = "regulator-fixed";
regulator-name = "vdd_emmc_io";
regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@ vdd_emmc_io: vdd-emmc-io {
vin-supply = <&vdd_3v3_io>;
};
- vdd_in_otg_out: vdd-in-otg-out {
+ vdd_in_otg_out: regulator-vdd-in-otg-out {
compatible = "regulator-fixed";
regulator-name = "vdd_in_otg_out";
regulator-always-on;
@@ -63,7 +63,7 @@ vdd_in_otg_out: vdd-in-otg-out {
regulator-max-microvolt = <5000000>;
};
- vdd_misc_1v8: vdd-misc-1v8 {
+ vdd_misc_1v8: regulator-vdd-misc-1v8 {
compatible = "regulator-fixed";
regulator-name = "vdd_misc_1v8";
regulator-always-on;
@@ -47,7 +47,7 @@ ir: ir-receiver {
pinctrl-0 = <&ir_int>;
};
- vcc_flash: flash-regulator {
+ vcc_flash: regulator-flash {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
@@ -55,7 +55,7 @@ vcc_flash: flash-regulator {
vin-supply = <&vcc_io>;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -67,7 +67,7 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@ vcc_sys: vsys-regulator {
* A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
* by the dvp_pwr pin.
*/
- vcc18_dvp: vcc18-dvp-regulator {
+ vcc18_dvp: regulator-vcc18-dvp {
compatible = "regulator-fixed";
regulator-name = "vcc18-dvp";
regulator-min-microvolt = <1800000>;
@@ -88,7 +88,7 @@ vcc18_dvp: vcc18-dvp-regulator {
vin-supply = <&vcc28_dvp>;
};
- vcc28_dvp: vcc28-dvp-regulator {
+ vcc28_dvp: regulator-vcc28-dvp {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
@@ -48,7 +48,7 @@ ir: ir-receiver {
pinctrl-0 = <&ir_int>;
};
- vcc_host: vcc-host-regulator {
+ vcc_host: regulator-vcc-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -59,7 +59,7 @@ vcc_host: vcc-host-regulator {
regulator-boot-on;
};
- vcc_otg: vcc-otg-regulator {
+ vcc_otg: regulator-vcc-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -70,7 +70,7 @@ vcc_otg: vcc-otg-regulator {
regulator-boot-on;
};
- vcc_sdmmc: sdmmc-regulator {
+ vcc_sdmmc: regulator-sdmmc {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
@@ -80,7 +80,7 @@ vcc_sdmmc: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
- vcc_sys: sys-regulator {
+ vcc_sys: regulator-sys {
compatible = "regulator-fixed";
regulator-name = "sys-supply";
regulator-min-microvolt = <5000000>;
@@ -23,7 +23,7 @@ ext_gmac: external-gmac-clock {
clock-output-names = "ext_gmac";
};
- vcc_flash: flash-regulator {
+ vcc_flash: regulator-flash {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
@@ -32,7 +32,7 @@ vcc_flash: flash-regulator {
vin-supply = <&vcc_io>;
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -70,7 +70,7 @@ simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
};
};
- sata_pwr: sata-prw-regulator {
+ sata_pwr: regulator-sata-prw {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
@@ -108,7 +108,7 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
- vcc_usb_host: vcc-host-regulator {
+ vcc_usb_host: regulator-vcc-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -117,7 +117,7 @@ vcc_usb_host: vcc-host-regulator {
regulator-name = "vcc_host";
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -85,7 +85,7 @@ simple-audio-card,cpu {
};
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -94,7 +94,7 @@ vcc_sys: vsys-regulator {
regulator-boot-on;
};
- vcc_sd: sdmmc-regulator {
+ vcc_sd: regulator-sdmmc {
compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -14,11 +14,11 @@ / {
compatible = "google,veyron-brain-rev0", "google,veyron-brain",
"google,veyron", "rockchip,rk3288";
- vcc33_sys: vcc33-sys {
+ vcc33_sys: regulator-vcc33-sys {
vin-supply = <&vcc_5v>;
};
- vcc33_io: vcc33_io {
+ vcc33_io: regulator-vcc33-io {
compatible = "regulator-fixed";
regulator-name = "vcc33_io";
regulator-always-on;
@@ -28,7 +28,7 @@ vcc33_io: vcc33_io {
};
/* This turns on vbus for host2 and otg (dwc2) */
- vcc5_host2: vcc5-host2-regulator {
+ vcc5_host2: regulator-vcc5-host2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -43,23 +43,23 @@ switch-lid {
};
/* A non-regulated voltage from power supply or battery */
- vccsys: vccsys {
+ vccsys: regulator-vccsys {
compatible = "regulator-fixed";
regulator-name = "vccsys";
regulator-boot-on;
regulator-always-on;
};
- vcc33_sys: vcc33-sys {
+ vcc33_sys: regulator-vcc33-sys {
vin-supply = <&vccsys>;
};
- vcc_5v: vcc-5v {
+ vcc_5v: regulator-vcc-5v {
vin-supply = <&vccsys>;
};
/* This turns on vbus for host1 (dwc2) */
- vcc5_host1: vcc5-host1-regulator {
+ vcc5_host1: regulator-vcc5-host1 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -71,7 +71,7 @@ vcc5_host1: vcc5-host1-regulator {
};
/* This turns on vbus for otg for host mode (dwc2) */
- vcc5v_otg: vcc5v-otg-regulator {
+ vcc5v_otg: regulator-vcc5v-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -18,7 +18,7 @@ / {
"google,veyron-fievel-rev0", "google,veyron-fievel",
"google,veyron", "rockchip,rk3288";
- vccsys: vccsys {
+ vccsys: regulator-vccsys {
compatible = "regulator-fixed";
regulator-name = "vccsys";
regulator-boot-on;
@@ -29,14 +29,14 @@ vccsys: vccsys {
* vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys,
* enabled by vcc_18
*/
- vcc33_io: vcc33-io {
+ vcc33_io: regulator-vcc33-io {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc33_io";
};
- vcc5_host1: vcc5-host1-regulator {
+ vcc5_host1: regulator-vcc5-host1 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
@@ -47,7 +47,7 @@ vcc5_host1: vcc5-host1-regulator {
regulator-boot-on;
};
- vcc5_host2: vcc5-host2-regulator {
+ vcc5_host2: regulator-vcc5-host2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -58,7 +58,7 @@ vcc5_host2: vcc5-host2-regulator {
regulator-boot-on;
};
- vcc5v_otg: vcc5v-otg-regulator {
+ vcc5v_otg: regulator-vcc5v-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -18,11 +18,11 @@ / {
"google,veyron-mickey-rev0", "google,veyron-mickey",
"google,veyron", "rockchip,rk3288";
- vcc_5v: vcc-5v {
+ vcc_5v: regulator-vcc-5v {
vin-supply = <&vcc33_sys>;
};
- vcc33_io: vcc33_io {
+ vcc33_io: regulator-vcc33-io {
compatible = "regulator-fixed";
regulator-name = "vcc33_io";
regulator-always-on;
@@ -75,7 +75,7 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
- vcc_5v: vcc-5v {
+ vcc_5v: regulator-vcc-5v {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-always-on;
@@ -84,7 +84,7 @@ vcc_5v: vcc-5v {
regulator-max-microvolt = <5000000>;
};
- vcc33_sys: vcc33-sys {
+ vcc33_sys: regulator-vcc33-sys {
compatible = "regulator-fixed";
regulator-name = "vcc33_sys";
regulator-always-on;
@@ -93,7 +93,7 @@ vcc33_sys: vcc33-sys {
regulator-max-microvolt = <3300000>;
};
- vcc50_hdmi: vcc50-hdmi {
+ vcc50_hdmi: regulator-vcc50-hdmi {
compatible = "regulator-fixed";
regulator-name = "vcc50_hdmi";
regulator-always-on;
@@ -101,7 +101,7 @@ vcc50_hdmi: vcc50-hdmi {
vin-supply = <&vcc_5v>;
};
- vdd_logic: vdd-logic {
+ vdd_logic: regulator-vdd-logic {
compatible = "pwm-regulator";
regulator-name = "vdd_logic";
@@ -11,7 +11,7 @@
/ {
compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
- vccio_flash: vccio-flash-regulator {
+ vccio_flash: regulator-vccio-flash {
compatible = "regulator-fixed";
regulator-name = "vccio_flash";
regulator-min-microvolt = <1800000>;
@@ -19,7 +19,7 @@ memory {
device_type = "memory";
};
- dc12_vbat: dc12-vbat {
+ dc12_vbat: regulator-dc12-vbat {
compatible = "regulator-fixed";
regulator-name = "dc12_vbat";
regulator-min-microvolt = <12000000>;
@@ -28,7 +28,7 @@ dc12_vbat: dc12-vbat {
regulator-boot-on;
};
- vboot_3v3: vboot-3v3 {
+ vboot_3v3: regulator-vboot-3v3 {
compatible = "regulator-fixed";
regulator-name = "vboot_3v3";
regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ vboot_3v3: vboot-3v3 {
vin-supply = <&dc12_vbat>;
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <3700000>;
@@ -48,7 +48,7 @@ vcc_sys: vsys-regulator {
vin-supply = <&dc12_vbat>;
};
- vboot_5v: vboot-5v {
+ vboot_5v: regulator-vboot-5v {
compatible = "regulator-fixed";
regulator-name = "vboot_sv";
regulator-min-microvolt = <5000000>;
@@ -58,7 +58,7 @@ vboot_5v: vboot-5v {
vin-supply = <&dc12_vbat>;
};
- v3g_3v3: v3g-3v3 {
+ v3g_3v3: regulator-v3g-3v3 {
compatible = "regulator-fixed";
regulator-name = "v3g_3v3";
regulator-min-microvolt = <3300000>;
@@ -68,7 +68,7 @@ v3g_3v3: v3g-3v3 {
vin-supply = <&dc12_vbat>;
};
- vsus_5v: vsus-5v {
+ vsus_5v: regulator-vsus-5v {
compatible = "regulator-fixed";
regulator-name = "vsus_5v";
regulator-min-microvolt = <5000000>;
@@ -78,7 +78,7 @@ vsus_5v: vsus-5v {
vin-supply = <&vcc_io>;
};
- vcc50_hdmi: vcc50-hdmi {
+ vcc50_hdmi: regulator-vcc50-hdmi {
compatible = "regulator-fixed";
regulator-name = "vcc50_hdmi";
enable-active-high;
@@ -90,7 +90,7 @@ vcc50_hdmi: vcc50-hdmi {
vin-supply = <&vsus_5v>;
};
- vusb1_5v: vusb1-5v {
+ vusb1_5v: regulator-vusb1-5v {
compatible = "regulator-fixed";
regulator-name = "vusb1_5v";
enable-active-high;
@@ -102,7 +102,7 @@ vusb1_5v: vusb1-5v {
vin-supply = <&vsus_5v>;
};
- vusb2_5v: vusb2-5v {
+ vusb2_5v: regulator-vusb2-5v {
compatible = "regulator-fixed";
regulator-name = "vusb2_5v";
enable-active-high;
@@ -23,7 +23,7 @@ sdio_pwrseq: sdio-pwrseq {
pinctrl-0 = <&wifi_enable_h>;
};
- vcc12v_dcin: vcc12v-dcin-regulator {
+ vcc12v_dcin: regulator-vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -32,7 +32,7 @@ vcc12v_dcin: vcc12v-dcin-regulator {
regulator-max-microvolt = <12000000>;
};
- vcc5v0_sys: vcc5v0-sys-regulator {
+ vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
@@ -42,7 +42,7 @@ vcc5v0_sys: vcc5v0-sys-regulator {
vin-supply = <&vcc12v_dcin>;
};
- vbus_host: vbus-host {
+ vbus_host: regulator-vbus-host {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb1_en_oc>;
@@ -51,7 +51,7 @@ vbus_host: vbus-host {
vin-supply = <&vcc5v0_sys>;
};
- vbus_typec: vbus-typec {
+ vbus_typec: regulator-vbus-typec {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb0_en_oc>;
@@ -25,7 +25,7 @@ chosen {
stdout-path = "serial2:1500000n8";
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ backlight: backlight {
pwms = <&pwm0 0 25000 0>;
};
- vcc_sys: vsys-regulator {
+ vcc_sys: regulator-vsys {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
@@ -21,7 +21,7 @@ chosen {
stdout-path = "serial2:1500000n8";
};
- vcc12v_dcin: vcc12v-dcin-regulator {
+ vcc12v_dcin: regulator-vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -30,7 +30,7 @@ vcc12v_dcin: vcc12v-dcin-regulator {
regulator-max-microvolt = <12000000>;
};
- vcc5v0_sys: vcc5v0-sys-regulator {
+ vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
@@ -40,7 +40,7 @@ vcc5v0_sys: vcc5v0-sys-regulator {
vin-supply = <&vcc12v_dcin>;
};
- v3v3_sys: v3v3-sys-regulator {
+ v3v3_sys: regulator-v3v3-sys {
compatible = "regulator-fixed";
regulator-name = "v3v3_sys";
regulator-always-on;
@@ -11,7 +11,7 @@ aliases {
mmc0 = &emmc;
};
- vccio_flash: vccio-flash-regulator {
+ vccio_flash: regulator-vccio-flash {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
The nodename for fixed-regulators has changed to pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$' Fix all Rockchip DT regulator nodenames. Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- regulator: dt-bindings: fixed-regulator: Add a preferred node name https://lore.kernel.org/r/20240426215147.3138211-1-robh@kernel.org Some rk3288-veyron regulators are skipped for now. --- arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 2 +- .../boot/dts/rockchip/rk3066a-bqcurie2.dts | 4 +-- .../boot/dts/rockchip/rk3066a-marsboard.dts | 6 ++-- arch/arm/boot/dts/rockchip/rk3066a-mk808.dts | 12 ++++---- .../boot/dts/rockchip/rk3066a-rayeager.dts | 16 +++++------ arch/arm/boot/dts/rockchip/rk3128-evb.dts | 4 +-- .../arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 28 +++++++++---------- .../boot/dts/rockchip/rk3188-bqedison2qc.dts | 14 +++++----- arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts | 2 +- .../boot/dts/rockchip/rk3188-radxarock.dts | 8 +++--- arch/arm/boot/dts/rockchip/rk3228-evb.dts | 2 +- arch/arm/boot/dts/rockchip/rk3229-evb.dts | 16 +++++------ arch/arm/boot/dts/rockchip/rk3229-xms6.dts | 16 +++++------ .../boot/dts/rockchip/rk3288-evb-act8846.dts | 4 +-- arch/arm/boot/dts/rockchip/rk3288-evb.dtsi | 8 +++--- .../rockchip/rk3288-firefly-reload-core.dtsi | 2 +- .../dts/rockchip/rk3288-firefly-reload.dts | 18 ++++++------ .../arm/boot/dts/rockchip/rk3288-firefly.dtsi | 16 +++++------ arch/arm/boot/dts/rockchip/rk3288-miqi.dts | 8 +++--- .../boot/dts/rockchip/rk3288-phycore-rdk.dts | 6 ++-- .../boot/dts/rockchip/rk3288-phycore-som.dtsi | 6 ++-- .../arm/boot/dts/rockchip/rk3288-popmetal.dts | 10 +++---- arch/arm/boot/dts/rockchip/rk3288-r89.dts | 8 +++--- .../boot/dts/rockchip/rk3288-rock2-som.dtsi | 4 +-- .../boot/dts/rockchip/rk3288-rock2-square.dts | 6 ++-- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 4 +-- .../boot/dts/rockchip/rk3288-veyron-brain.dts | 6 ++-- .../rockchip/rk3288-veyron-chromebook.dtsi | 10 +++---- .../dts/rockchip/rk3288-veyron-fievel.dts | 10 +++---- .../dts/rockchip/rk3288-veyron-mickey.dts | 4 +-- arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi | 8 +++--- .../boot/dts/rockchip/rk3288-vmarc-som.dtsi | 2 +- arch/arm/boot/dts/rockchip/rk3288-vyasa.dts | 18 ++++++------ .../rockchip-radxa-dalang-carrier.dtsi | 8 +++--- .../arm/boot/dts/rockchip/rv1108-elgin-r1.dts | 2 +- arch/arm/boot/dts/rockchip/rv1108-evb.dts | 2 +- .../dts/rockchip/rv1126-edgeble-neu2-io.dts | 6 ++-- .../dts/rockchip/rv1126-edgeble-neu2.dtsi | 2 +- 38 files changed, 154 insertions(+), 154 deletions(-) -- 2.39.2