| Message ID | 20240926211957.4108692-2-vladimir.zapolskiy@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | media: qcom: camss: manage supply regulators as CSIPHY resources | expand |
Hi Vladimir, On 9/27/2024 5:19 AM, Vladimir Zapolskiy wrote: > This change allows to properly assign and manage supply regulator > resources by CSIPHY subdevices of CAMSS, this is needed to fine tune > description of supply regulators on newer platforms, conversion of > old platforms to the new scheme is also anticipated. > > Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > --- > .../media/platform/qcom/camss/camss-csiphy.c | 35 ++++++++++++++++++- > .../media/platform/qcom/camss/camss-csiphy.h | 2 ++ > 2 files changed, 36 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c > index 2f7361dfd461..68a3ea1ba2a5 100644 > --- a/drivers/media/platform/qcom/camss/camss-csiphy.c > +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c > @@ -212,14 +212,25 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on) > if (ret < 0) > return ret; > > + ret = regulator_bulk_enable(csiphy->num_supplies, > + csiphy->supplies); > + if (ret < 0) { > + pm_runtime_put_sync(dev); > + return ret; > + } > + > ret = csiphy_set_clock_rates(csiphy); > if (ret < 0) { > + regulator_bulk_disable(csiphy->num_supplies, > + csiphy->supplies); > pm_runtime_put_sync(dev); > return ret; > } > > ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev); > if (ret < 0) { > + regulator_bulk_disable(csiphy->num_supplies, > + csiphy->supplies); > pm_runtime_put_sync(dev); > return ret; > } > @@ -234,6 +245,8 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on) > > camss_disable_clocks(csiphy->nclocks, csiphy->clock); > > + regulator_bulk_disable(csiphy->num_supplies, csiphy->supplies); > + > pm_runtime_put_sync(dev); > } > > @@ -676,7 +689,27 @@ int msm_csiphy_subdev_init(struct camss *camss, > } > } > > - return 0; > + /* CSIPHY supplies */ > + for (i = 0; i < ARRAY_SIZE(res->regulators); i++) { > + if (res->regulators[i]) > + csiphy->num_supplies++; > + } > + > + if (csiphy->num_supplies) { > + csiphy->supplies = devm_kmalloc_array(camss->dev, > + csiphy->num_supplies, > + sizeof(*csiphy->supplies), > + GFP_KERNEL); > + if (!csiphy->supplies) > + return -ENOMEM; > + } > + > + for (i = 0; i < csiphy->num_supplies; i++) > + csiphy->supplies[i].supply = res->regulators[i]; > + > + ret = devm_regulator_bulk_get(camss->dev, csiphy->num_supplies, > + csiphy->supplies); > + return ret; > } > > /* > diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h > index 47f0b6b09eba..eebc1ff1cfab 100644 > --- a/drivers/media/platform/qcom/camss/camss-csiphy.h > +++ b/drivers/media/platform/qcom/camss/camss-csiphy.h > @@ -91,6 +91,8 @@ struct csiphy_device { > bool *rate_set; > int nclocks; > u32 timer_clk_rate; > + struct regulator_bulk_data *supplies; > + int num_supplies; > struct csiphy_config cfg; > struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM]; > const struct csiphy_subdev_resources *res; I have verified this change on SM8550 board. Tested-by: Depeng Shao <quic_depengs@quicinc.com> # SM8550 Thanks, Depeng
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c index 2f7361dfd461..68a3ea1ba2a5 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy.c +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c @@ -212,14 +212,25 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on) if (ret < 0) return ret; + ret = regulator_bulk_enable(csiphy->num_supplies, + csiphy->supplies); + if (ret < 0) { + pm_runtime_put_sync(dev); + return ret; + } + ret = csiphy_set_clock_rates(csiphy); if (ret < 0) { + regulator_bulk_disable(csiphy->num_supplies, + csiphy->supplies); pm_runtime_put_sync(dev); return ret; } ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev); if (ret < 0) { + regulator_bulk_disable(csiphy->num_supplies, + csiphy->supplies); pm_runtime_put_sync(dev); return ret; } @@ -234,6 +245,8 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on) camss_disable_clocks(csiphy->nclocks, csiphy->clock); + regulator_bulk_disable(csiphy->num_supplies, csiphy->supplies); + pm_runtime_put_sync(dev); } @@ -676,7 +689,27 @@ int msm_csiphy_subdev_init(struct camss *camss, } } - return 0; + /* CSIPHY supplies */ + for (i = 0; i < ARRAY_SIZE(res->regulators); i++) { + if (res->regulators[i]) + csiphy->num_supplies++; + } + + if (csiphy->num_supplies) { + csiphy->supplies = devm_kmalloc_array(camss->dev, + csiphy->num_supplies, + sizeof(*csiphy->supplies), + GFP_KERNEL); + if (!csiphy->supplies) + return -ENOMEM; + } + + for (i = 0; i < csiphy->num_supplies; i++) + csiphy->supplies[i].supply = res->regulators[i]; + + ret = devm_regulator_bulk_get(camss->dev, csiphy->num_supplies, + csiphy->supplies); + return ret; } /* diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h index 47f0b6b09eba..eebc1ff1cfab 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy.h +++ b/drivers/media/platform/qcom/camss/camss-csiphy.h @@ -91,6 +91,8 @@ struct csiphy_device { bool *rate_set; int nclocks; u32 timer_clk_rate; + struct regulator_bulk_data *supplies; + int num_supplies; struct csiphy_config cfg; struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM]; const struct csiphy_subdev_resources *res;
This change allows to properly assign and manage supply regulator resources by CSIPHY subdevices of CAMSS, this is needed to fine tune description of supply regulators on newer platforms, conversion of old platforms to the new scheme is also anticipated. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> --- .../media/platform/qcom/camss/camss-csiphy.c | 35 ++++++++++++++++++- .../media/platform/qcom/camss/camss-csiphy.h | 2 ++ 2 files changed, 36 insertions(+), 1 deletion(-)