diff mbox series

[v4,1/2] dt-bindings: arm: aspeed: add IBM SBP1 board

Message ID 20241008111924.1865857-1-naresh.solanki@9elements.com (mailing list archive)
State New
Headers show
Series [v4,1/2] dt-bindings: arm: aspeed: add IBM SBP1 board | expand

Commit Message

Naresh Solanki Oct. 8, 2024, 11:19 a.m. UTC
Document the new compatibles used on IBM SBP1.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes in V4:
- Retain Acked-by from v2.
- Fix alphabetic order
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Rob Herring (Arm) Oct. 8, 2024, 2:56 p.m. UTC | #1
On Tue, 08 Oct 2024 16:49:18 +0530, Naresh Solanki wrote:
> Document the new compatibles used on IBM SBP1.
> 
> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> Changes in V4:
> - Retain Acked-by from v2.
> - Fix alphabetic order
> ---
>  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241008111924.1865857-1-naresh.solanki@9elements.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-pvcore-nic2@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-pvcore-nic1@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-p3v3-nic@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-p1v2-nic@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-p1v8-nic@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/bus@1e78a000/i2c@280/bmc-slave@10: failed to match any schema with compatible: ['ipmb-dev']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: r38263-p1v05-pch-aux@40: Unevaluated properties are not allowed ('interrupt-parent', 'interrupts', 'regulators' were unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38060-p1v8-pch-aux@40: Unevaluated properties are not allowed ('interrupt-parent', 'interrupts', 'regulators' were unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
	from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-p5v-aux@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: ir38263-p3v3-aux@40: Unevaluated properties are not allowed ('regulators' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
Andrew Jeffery Oct. 9, 2024, 1:27 a.m. UTC | #2
Hi Naresh,

On Tue, 2024-10-08 at 16:49 +0530, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> Add a device tree for IBM sbp1 BMC board which is based on AST2600 SOC.
> 
> sbp1 baseboard has:
> - support for up to four Sapphire Rapids sockets having 16 DIMMS each.
>   - 240 core/480 threads at maximum
> - 32x CPU PCIe slots
> - 2x M.2 PCH PCIe slots
> - Dual 200Gbit/s NIC
> - SPI TPM
> 
> Added the following:
> - Indication LEDs
> - I2C mux & GPIO controller, pin assignments,
> - Thermister,
> - Voltage regulator
> - EEPROM/VPD
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> 
> ---
> Changes in V4:
> - Move reset related entried under mdio to phy.
> - Removed reserved gpio range.
> Changes in V3:
> Drop unused regulator entries which are not used by drivers.
> Decouple p12v_a
> Update pincfg for U62120
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |    1 +
>  .../boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts   | 6128 +++++++++++++++++
>  2 files changed, 6129 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
> 
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index c4f064e4b073..577cc6754c45 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-ibm-rainier-1s4u.dtb \
>  	aspeed-bmc-ibm-rainier-4u.dtb \
>  	aspeed-bmc-ibm-system1.dtb \
> +	aspeed-bmc-ibm-sbp1.dtb \

Please keep this list sorted alphabetically.

>  	aspeed-bmc-intel-s2600wf.dtb \
>  	aspeed-bmc-inspur-fp5280g2.dtb \
>  	aspeed-bmc-inspur-nf5280m6.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
> new file mode 100644
> index 000000000000..6036a9ca3840
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
> 
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	bmc_mux_nic: mux@77 {
> +		compatible = "maxim,max7357";
> +		reg = <0x77>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
> +		vdd-supply = <&p3v3_aux>;
> +
> +		i2c@0 {
> +			reg = <0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			smb_pex_nic: pinctrl@20 {
> 
...
> +			};
> +		};
> +
> +		i2c@1 {
> +			reg = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		i2c@2 {
> +			reg = <2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			ir38263-pvcore-nic2@40 {
> +				compatible = "infineon,ir38263";
> +				reg = <0x40>;
> +
> +				regulators {
> +					pvcore_nic2: vout {
> +						regulator-name = "pvcore_nic2";
> +						regulator-enable-ramp-delay = <2000>;
> +						vin-supply = <&p12v>;
> +					};
> +				};
> +			};

This doesn't match my understanding of the infineon,ir38263 and
regulator bindings. Certainly `make CHECK_DTBS=y ...` complains about
it.

This is untested, but from my understanding, it should rather be
something like:

   pvcore_nic2: regulator@40 {
       compatible = "infineon,ir38263";
       reg = <0x40>;
   
       regulator-name = "pvcore_nic2";
       regulator-enable-ramp-delay = <2000>;
       vin-supply = <&p12v>;
   };

Note that this is _not_ the same as the maxim,max5978 binding, which
_does_ specify the regulators subnode.

Please fix all infineon,ir38263 nodes in the dts.

...

> +
> +		i2c-protocol;
> +	};
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +
> +	i2cmux2: mux@77 {
> +		compatible = "maxim,max7357";
> +		reg = <0x77>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
> +		vdd-supply = <&p3v3_aux>;
> +
> +		i2c@1 {
> +			reg = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			r38263-p1v05-pch-aux@40 {
> +				compatible = "infineon,ir38263";
> +				reg = <0x40>;
> +
> +				interrupt-parent = <&smb_pex_vr_ctrl>;
> +				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;

Aside from the regulators subnode issue, the infineon,ir38263 binding
doensn't specify interrupt properties. Does it need to be updated?

Otherwise, we have the following warning:

   r38263-p1v05-pch-aux@40: Unevaluated properties are not allowed ('interrupt-parent', 'interrupts', 'regulators' were unexpected)

> +
> +				regulators {
> +					p1v05_pch_aux: vout {
> +						regulator-name = "p1v05_pch_aux";
> +						regulator-enable-ramp-delay = <2000>;
> +						vin-supply = <&p12v>;
> +					};
> +				};
> +			};
> +		};
> +
> +		i2c@2 {
> +			reg = <2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			ir38060-p1v8-pch-aux@40 {
> +				compatible = "infineon,ir38060";
> +				reg = <0x40>;
> +
> +				interrupt-parent = <&smb_pex_vr_ctrl>;
> +				interrupts = <32 IRQ_TYPE_LEVEL_LOW>;

As above.

Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 2f92b8ab08fa..c79c74ab3d78 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -91,6 +91,7 @@  properties:
               - ibm,everest-bmc
               - ibm,fuji-bmc
               - ibm,rainier-bmc
+              - ibm,sbp1-bmc
               - ibm,system1-bmc
               - ibm,tacoma-bmc
               - inventec,starscream-bmc