diff mbox series

[v3,1/2] dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC

Message ID 20241009115813.2908803-2-kevin_chen@aspeedtech.com (mailing list archive)
State New
Headers show
Series Add support for AST2700 INTC driver | expand

Commit Message

Kevin Chen Oct. 9, 2024, 11:58 a.m. UTC 
The ASPEED AST27XX interrupt controller(INTC) contain second level and
third level interrupt controller.

INTC0:
The second level INTC, which used to assert GIC(#192~#197) if interrupt
in INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in
one INTC0.

INTC1_x:
The third level INTC, which used to assert GIC(#192~#197) if interrupt in
INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in one INTC0.

Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
---
 .../aspeed,ast2700-intc.yaml                  | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml

Comments

Markus Elfring Oct. 9, 2024, 12:56 p.m. UTC | #1 
> The ASPEED AST27XX interrupt controller(INTC) contain second level and
…
                                                contains?

…
in INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in
…
                                             numbers?


Regards,
Markus
Rob Herring (Arm) Oct. 9, 2024, 9:11 p.m. UTC | #2 
On Wed, Oct 09, 2024 at 07:58:12PM +0800, Kevin Chen wrote:
> The ASPEED AST27XX interrupt controller(INTC) contain second level and
> third level interrupt controller.
> 
> INTC0:
> The second level INTC, which used to assert GIC(#192~#197) if interrupt
> in INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in
> one INTC0.
> 
> INTC1_x:
> The third level INTC, which used to assert GIC(#192~#197) if interrupt in
> INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in one INTC0.
> 
> Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> ---
>  .../aspeed,ast2700-intc.yaml                  | 87 +++++++++++++++++++
>  1 file changed, 87 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
> new file mode 100644
> index 000000000000..650a1f6e1177
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed AST2700 Interrupt Controller
> +
> +description:
> +  This interrupt controller hardware is second level interrupt controller that
> +  is hooked to a parent interrupt controller. It's useful to combine multiple
> +  interrupt sources into 1 interrupt to parent interrupt controller.
> +
> +maintainers:
> +  - Kevin Chen <kevin_chen@aspeedtech.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2700-intc-ic
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2

Describe the meaning of the cells here.

> +
> +  interrupts:
> +    maxItems: 10
> +    description:

You need '|' to preserve formatting.

> +      Depend to which INTC0 or INTC1 used.
> +      INTC0 and INTC1 are two kinds of interrupt controller with enable and raw
> +      status registers for use.
> +      INTC0 is used to assert GIC if interrupt in INTC1 asserted.
> +      INTC1 is used to assert INTC0 if interrupt of modules asserted.
> +      +-----+   +-------+     +---------+---module0
> +      | GIC |---| INTC0 |--+--| INTC1_0 |---module2
> +      |     |   |       |  |  |         |---...
> +      +-----+   +-------+  |  +---------+---module31
> +                           |
> +                           |   +---------+---module0
> +                           +---| INTC1_1 |---module2
> +                           |   |         |---...
> +                           |   +---------+---module31
> +                          ...
> +                           |   +---------+---module0
> +                           +---| INTC1_5 |---module2
> +                               |         |---...
> +                               +---------+---module31
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        interrupt-controller@12101b00 {
> +            compatible = "aspeed,ast2700-intc-ic";
> +            reg = <0 0x12101b00 0 0x10>;
> +            #interrupt-cells = <2>;
> +            interrupt-controller;
> +            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
> +        };
> +    };
> -- 
> 2.34.1
>
Kevin Chen Oct. 11, 2024, 10:02 a.m. UTC | #3 
> > The ASPEED AST27XX interrupt controller(INTC) contain second level and
> > third level interrupt controller.
> >
> > INTC0:
> > The second level INTC, which used to assert GIC(#192~#197) if
> > interrupt in INTC1 asserted. There are 6 GIC interrupt
> > number(#192~#197) used in one INTC0.
> >
> > INTC1_x:
> > The third level INTC, which used to assert GIC(#192~#197) if interrupt
> > in
> > INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in one
> INTC0.
> >
> > Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> > ---
> >  .../aspeed,ast2700-intc.yaml                  | 87
> +++++++++++++++++++
> >  1 file changed, 87 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-
> > intc.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast270
> > 0-intc.yaml
> > b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast270
> > 0-intc.yaml
> > new file mode 100644
> > index 000000000000..650a1f6e1177
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,as
> > +++ t2700-intc.yaml
> > @@ -0,0 +1,87 @@
> > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-int
> > +c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Aspeed AST2700 Interrupt Controller
> > +
> > +description:
> > +  This interrupt controller hardware is second level interrupt
> > +controller that
> > +  is hooked to a parent interrupt controller. It's useful to combine
> > +multiple
> > +  interrupt sources into 1 interrupt to parent interrupt controller.
> > +
> > +maintainers:
> > +  - Kevin Chen <kevin_chen@aspeedtech.com>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - aspeed,ast2700-intc-ic
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupt-controller: true
> > +
> > +  '#interrupt-cells':
> > +    const: 2
> 
> Describe the meaning of the cells here.
I would change to the following code
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
> 
> > +
> > +  interrupts:
> > +    maxItems: 10
> > +    description:
> 
> You need '|' to preserve formatting.
OK. Thanks

> 
> > +      Depend to which INTC0 or INTC1 used.
> > +      INTC0 and INTC1 are two kinds of interrupt controller with enable
> and raw
> > +      status registers for use.
> > +      INTC0 is used to assert GIC if interrupt in INTC1 asserted.
> > +      INTC1 is used to assert INTC0 if interrupt of modules asserted.
> > +      +-----+   +-------+     +---------+---module0
> > +      | GIC |---| INTC0 |--+--| INTC1_0 |---module2
> > +      |     |   |       |  |  |         |---...
> > +      +-----+   +-------+  |  +---------+---module31
> > +                           |
> > +                           |   +---------+---module0
> > +                           +---| INTC1_1 |---module2
> > +                           |   |         |---...
> > +                           |   +---------+---module31
> > +                          ...
> > +                           |   +---------+---module0
> > +                           +---| INTC1_5 |---module2
> > +                               |         |---...
> > +                               +---------+---module31
> > +
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupt-controller
> > +  - '#interrupt-cells'
> > +  - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    bus {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        interrupt-controller@12101b00 {
> > +            compatible = "aspeed,ast2700-intc-ic";
> > +            reg = <0 0x12101b00 0 0x10>;
> > +            #interrupt-cells = <2>;
> > +            interrupt-controller;
> > +            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
> > +        };
> > +    };
> > --
> > 2.34.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
new file mode 100644
index 000000000000..650a1f6e1177
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
@@ -0,0 +1,87 @@ 
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed AST2700 Interrupt Controller
+
+description:
+  This interrupt controller hardware is second level interrupt controller that
+  is hooked to a parent interrupt controller. It's useful to combine multiple
+  interrupt sources into 1 interrupt to parent interrupt controller.
+
+maintainers:
+  - Kevin Chen <kevin_chen@aspeedtech.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2700-intc-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 10
+    description:
+      Depend to which INTC0 or INTC1 used.
+      INTC0 and INTC1 are two kinds of interrupt controller with enable and raw
+      status registers for use.
+      INTC0 is used to assert GIC if interrupt in INTC1 asserted.
+      INTC1 is used to assert INTC0 if interrupt of modules asserted.
+      +-----+   +-------+     +---------+---module0
+      | GIC |---| INTC0 |--+--| INTC1_0 |---module2
+      |     |   |       |  |  |         |---...
+      +-----+   +-------+  |  +---------+---module31
+                           |
+                           |   +---------+---module0
+                           +---| INTC1_1 |---module2
+                           |   |         |---...
+                           |   +---------+---module31
+                          ...
+                           |   +---------+---module0
+                           +---| INTC1_5 |---module2
+                               |         |---...
+                               +---------+---module31
+
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        interrupt-controller@12101b00 {
+            compatible = "aspeed,ast2700-intc-ic";
+            reg = <0 0x12101b00 0 0x10>;
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };