diff mbox series

[4/4] phy: qcom: qmp: Add qmp configuration for QCS8300

Message ID 20241009195348.2649368-5-quic_kriskura@quicinc.com (mailing list archive)
State New
Headers show
Series Add USB Support for QCS8300 | expand

Commit Message

Krishna Kurapati Oct. 9, 2024, 7:53 p.m. UTC
Add qmp configuration for QCS8300. It is similar to SA8775P and
SC8280XP except for some Lane configuration settings specific to
QCS8300.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 65 +++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

Comments

Dmitry Baryshkov Oct. 10, 2024, 1:56 p.m. UTC | #1
On Thu, Oct 10, 2024 at 01:23:48AM GMT, Krishna Kurapati wrote:
> Add qmp configuration for QCS8300. It is similar to SA8775P and
> SC8280XP except for some Lane configuration settings specific to
> QCS8300.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 65 +++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 2fd49355aa37..a8f90159395f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -871,6 +871,16 @@  static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_usb_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
 };
 
+static const struct qmp_phy_init_tbl qcs8300_usb3_uniphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0xf2),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
 static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
@@ -989,6 +999,40 @@  static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
 };
 
+static const struct qmp_phy_init_tbl qcs8300_usb3_uniphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xec),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
 static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
@@ -1462,6 +1506,24 @@  static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
 	.regs			= qmp_v5_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg qcs8300_usb3_uniphy_cfg = {
+	.offsets		= &qmp_usb_offsets_v5,
+
+	.serdes_tbl		= sc8280xp_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sc8280xp_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= qcs8300_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qcs8300_usb3_uniphy_tx_tbl),
+	.rx_tbl			= qcs8300_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(qcs8300_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sa8775p_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sa8775p_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_usb_tbl),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v5_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
 	.offsets		= &qmp_usb_offsets_v5,
 
@@ -2246,6 +2308,9 @@  static const struct of_device_id qmp_usb_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,qcs8300-qmp-usb3-uni-phy",
+		.data = &qcs8300_usb3_uniphy_cfg,
 	}, {
 		.compatible = "qcom,qdu1000-qmp-usb3-uni-phy",
 		.data = &qdu1000_usb3_uniphy_cfg,