| Message ID | 20240531202813.277109-1-marex@denx.de (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | drm: lcdif: Use adjusted_mode .clock instead of .crtc_clock | expand |
Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: > In case an upstream bridge modified the required clock frequency > in its .atomic_check callback by setting adjusted_mode.clock , > make sure that clock frequency is generated by the LCDIFv3 block. > > This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767 > with (e)DP output, where the TC358767 expects precise timing on > its input side, the precise timing must be generated by the LCDIF. > > Signed-off-by: Marek Vasut <marex@denx.de> With the other rc358767 patches in place, this does the trick. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: David Airlie <airlied@gmail.com> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Lucas Stach <l.stach@pengutronix.de> > Cc: Lukas F. Hartmann <lukas@mntmn.com> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Stefan Agner <stefan@agner.ch> > Cc: Thomas Zimmermann <tzimmermann@suse.de> > Cc: dri-devel@lists.freedesktop.org > Cc: imx@lists.linux.dev > Cc: kernel@dh-electronics.com > Cc: linux-arm-kernel@lists.infradead.org > --- > drivers/gpu/drm/mxsfb/lcdif_kms.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c > index 2541d2de4e45f..dbd42cc1da87f 100644 > --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c > +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c > @@ -407,8 +407,7 @@ static void lcdif_crtc_mode_set_nofb(struct drm_crtc_state *crtc_state, > struct drm_display_mode *m = &crtc_state->adjusted_mode; > > DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n", > - m->crtc_clock, > - (int)(clk_get_rate(lcdif->clk) / 1000)); > + m->clock, (int)(clk_get_rate(lcdif->clk) / 1000)); > DRM_DEV_DEBUG_DRIVER(drm->dev, "Bridge bus_flags: 0x%08X\n", > lcdif_crtc_state->bus_flags); > DRM_DEV_DEBUG_DRIVER(drm->dev, "Mode flags: 0x%08X\n", m->flags); > @@ -538,7 +537,7 @@ static void lcdif_crtc_atomic_enable(struct drm_crtc *crtc, > struct drm_device *drm = lcdif->drm; > dma_addr_t paddr; > > - clk_set_rate(lcdif->clk, m->crtc_clock * 1000); > + clk_set_rate(lcdif->clk, m->clock * 1000); > > pm_runtime_get_sync(drm->dev); > >
On 6/24/24 11:19 AM, Alexander Stein wrote: > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: >> In case an upstream bridge modified the required clock frequency >> in its .atomic_check callback by setting adjusted_mode.clock , >> make sure that clock frequency is generated by the LCDIFv3 block. >> >> This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767 >> with (e)DP output, where the TC358767 expects precise timing on >> its input side, the precise timing must be generated by the LCDIF. >> >> Signed-off-by: Marek Vasut <marex@denx.de> > > With the other rc358767 patches in place, this does the trick. > Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> I'll pick this up next week if there is no objection.
Hi Marek, On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: > On 6/24/24 11:19 AM, Alexander Stein wrote: > > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: > > > In case an upstream bridge modified the required clock frequency > > > in its .atomic_check callback by setting adjusted_mode.clock , > > > make sure that clock frequency is generated by the LCDIFv3 block. > > > > > > This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767 > > > with (e)DP output, where the TC358767 expects precise timing on > > > its input side, the precise timing must be generated by the > > > LCDIF. > > > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > > With the other rc358767 patches in place, this does the trick. > > Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > I'll pick this up next week if there is no objection. Unfortunately, this has caused a regression that is present in v6.12- rc1 on the i.MX8MP PHYTEC Pollux using the arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. The display is the edt,etml1010g3dra panel, as per the upstream dts. We bisected to this commit, and reverting this change fixed the screen. We then tried to retest this on top of v6.12-rc2, and found we also had to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 ("clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate") alongside this. Reverting these two commits makes the display work again at -rc2. Do you have any suggestions on anything we might be missing on our end? Please let me know if there's anything you'd like me to test as I'm not sure what the underlying fault was here. Best wishes, Isaac
On 10/7/24 7:01 PM, Isaac Scott wrote: > Hi Marek, Hi, > On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: >> On 6/24/24 11:19 AM, Alexander Stein wrote: >>> Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: >>>> In case an upstream bridge modified the required clock frequency >>>> in its .atomic_check callback by setting adjusted_mode.clock , >>>> make sure that clock frequency is generated by the LCDIFv3 block. >>>> >>>> This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767 >>>> with (e)DP output, where the TC358767 expects precise timing on >>>> its input side, the precise timing must be generated by the >>>> LCDIF. >>>> >>>> Signed-off-by: Marek Vasut <marex@denx.de> >>> >>> With the other rc358767 patches in place, this does the trick. >>> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> >> >> I'll pick this up next week if there is no objection. > > Unfortunately, this has caused a regression that is present in v6.12- > rc1 on the i.MX8MP PHYTEC Pollux using the > arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. The > display is the edt,etml1010g3dra panel, as per the upstream dts. We > bisected to this commit, and reverting this change fixed the screen. > > We then tried to retest this on top of v6.12-rc2, and found we also had > to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 ("clk: imx: > clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate") > alongside this. Reverting these two commits makes the display work > again at -rc2. > > Do you have any suggestions on anything we might be missing on our end? > Please let me know if there's anything you'd like me to test as I'm not > sure what the underlying fault was here. I believe what is going on is that the LCDIF cannot configure its upstream clock because something else is already using those clock and it set those clock to a specific frequency. LCDIF is now trying to configure those clock to match the LVDS panel, and it fails, so it tries to set some approximate clock and that is not good enough for the LVDS panel. Can you share dump of /sys/kernel/debug/clk/clk_summary on failing and working system ? You might see the difference around the "video" clock. (I have seen this behavior before, the fix was usually a matter of moving one of the LCDIFs to another upstream clock like PLL3, so it can pick well matching output clock instead of some horrid approximation which then drives the panel likely out of specification)
On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: > On 10/7/24 7:01 PM, Isaac Scott wrote: > > Hi Marek, > > Hi, > > > On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: > > > On 6/24/24 11:19 AM, Alexander Stein wrote: > > > > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: > > > > > In case an upstream bridge modified the required clock > > > > > frequency > > > > > in its .atomic_check callback by setting adjusted_mode.clock > > > > > , > > > > > make sure that clock frequency is generated by the LCDIFv3 > > > > > block. > > > > > > > > > > This is useful e.g. when LCDIFv3 feeds DSIM which feeds > > > > > TC358767 > > > > > with (e)DP output, where the TC358767 expects precise timing > > > > > on > > > > > its input side, the precise timing must be generated by the > > > > > LCDIF. > > > > > > > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > > > > > > With the other rc358767 patches in place, this does the trick. > > > > Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > > > > > I'll pick this up next week if there is no objection. > > > > Unfortunately, this has caused a regression that is present in > > v6.12- > > rc1 on the i.MX8MP PHYTEC Pollux using the > > arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. The > > display is the edt,etml1010g3dra panel, as per the upstream dts. We > > bisected to this commit, and reverting this change fixed the > > screen. > > > > We then tried to retest this on top of v6.12-rc2, and found we also > > had > > to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 ("clk: > > imx: > > clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate") > > alongside this. Reverting these two commits makes the display work > > again at -rc2. > > > > Do you have any suggestions on anything we might be missing on our > > end? > > Please let me know if there's anything you'd like me to test as I'm > > not > > sure what the underlying fault was here. > I believe what is going on is that the LCDIF cannot configure its > upstream clock because something else is already using those clock > and > it set those clock to a specific frequency. LCDIF is now trying to > configure those clock to match the LVDS panel, and it fails, so it > tries > to set some approximate clock and that is not good enough for the > LVDS > panel. > > Can you share dump of /sys/kernel/debug/clk/clk_summary on failing > and > working system ? You might see the difference around the "video" > clock. > > (I have seen this behavior before, the fix was usually a matter of > moving one of the LCDIFs to another upstream clock like PLL3, so it > can > pick well matching output clock instead of some horrid approximation > which then drives the panel likely out of specification) Hi Marek, Please find attached the clk_summary for v6.12-rc2 before and after the reversion (the one after the reversion is 6.12-rc2_summary_postfix). enable prepare protect duty hardware connection clock count count count rate accuracy phase cycle enable consumer id --------------------------------------------------------------------------------------------------------------------------------------------- rv3028-clkout 0 0 0 32768 0 0 50000 Y deviceless no_connection_id dummy 0 0 0 0 0 0 50000 Y 30b50000.mmc ipg 30b60000.mmc ipg deviceless no_connection_id clk_ext4 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext4 deviceless no_connection_id clk_ext3 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext3 deviceless no_connection_id clk_ext2 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext2 deviceless no_connection_id clk_ext1 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext1 deviceless no_connection_id osc_24m 13 16 0 24000000 0 0 50000 Y clock-controller@30380000 osc_24m timer@306a0000 per deviceless no_connection_id usb_phy_ref 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id usb_phy_root_clk 2 2 0 24000000 0 0 50000 Y 382f0040.usb-phy phy 381f0040.usb-phy phy deviceless no_connection_id hsio_pll 1 1 0 100000000 0 0 50000 Y 32f00000.pcie-phy ref deviceless no_connection_id sai_pll_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai_pll 0 0 0 49152000 0 0 50000 Y deviceless no_connection_id sai_pll_bypass 0 0 0 49152000 0 0 50000 Y deviceless no_connection_id sai_pll_out 0 0 0 49152000 0 0 50000 N deviceless no_connection_id sai_pll_out_div2 0 0 0 24576000 0 0 50000 Y deviceless no_connection_id earc_phy_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai1_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai2_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai3_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai5_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai6_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai7_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id audpll_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai7_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id vpu_vc8000e 0 0 0 24000000 0 0 50000 N deviceless no_connection_id vpu_vc8ke_root_clk 0 0 0 24000000 0 0 50000 N 38330000.blk-ctrl vc8000e power-domain@13 no_connection_id deviceless no_connection_id pdm 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pdm_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id pdm_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id media_mipi_test_byte 0 0 0 24000000 0 0 50000 N deviceless no_connection_id mem_repair 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id media_cam2_pix 0 0 0 24000000 0 0 50000 N deviceless no_connection_id media_cam2_pix_root_clk 0 0 0 24000000 0 0 50000 N 32ec0000.blk-ctrl cam2 deviceless no_connection_id media_cam1_pix 0 0 0 24000000 0 0 50000 N deviceless no_connection_id media_cam1_pix_root_clk 0 0 0 24000000 0 0 50000 N 32ec0000.blk-ctrl cam1 deviceless no_connection_id hdmi_ref_266m 0 0 0 24000000 0 0 50000 N 32fc0000.blk-ctrl ref_266m deviceless no_connection_id hdmi_24m 0 0 0 24000000 0 0 50000 N 32fc0000.blk-ctrl ref_24m deviceless no_connection_id hdmi_fdcc_tst 0 0 0 24000000 0 0 50000 N 32fc0000.blk-ctrl fdcc 32fc0000.blk-ctrl fdcc deviceless no_connection_id ipp_do_clko2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id ipp_do_clko1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id wdog 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id wdog3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id wdog2_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id wdog1_root_clk 1 1 0 24000000 0 0 50000 Y 30280000.watchdog no_connection_id deviceless no_connection_id gpt6 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt6_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt5 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt5_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt2_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt1_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm3 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id pwm3_root_clk 2 2 0 24000000 0 0 50000 Y 30680000.pwm per 30680000.pwm ipg deviceless no_connection_id pwm2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm2_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm1_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id usb_core_ref 2 2 0 24000000 0 0 50000 Y 38200000.usb ref 38100000.usb ref deviceless no_connection_id uart4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart1 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id uart1_root_clk 4 4 0 24000000 0 0 50000 Y 30860000.serial per 30860000.serial ipg deviceless no_connection_id i2c4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c2 0 1 0 24000000 0 0 50000 N deviceless no_connection_id i2c2_root_clk 0 1 0 24000000 0 0 50000 N 30a30000.i2c no_connection_id deviceless no_connection_id i2c1 0 1 0 24000000 0 0 50000 N deviceless no_connection_id i2c1_root_clk 0 1 0 24000000 0 0 50000 N 30a20000.i2c no_connection_id deviceless no_connection_id sai6 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai6_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai6_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai6_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai5_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai3_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai2_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai7_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai6_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai6_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai5_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai3_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai2_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai1_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai1_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c6 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c6_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c5 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c5_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id mipi_dsi_esc_rx 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sys_pll3_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sys_pll3 0 0 0 600000000 0 0 50000 Y deviceless no_connection_id sys_pll3_bypass 0 0 0 600000000 0 0 50000 Y deviceless no_connection_id sys_pll3_out 0 0 0 600000000 0 0 50000 N deviceless no_connection_id sys_pll2_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id sys_pll2 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id sys_pll2_bypass 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id sys_pll2_out 5 5 0 1000000000 0 0 50000 Y deviceless no_connection_id sys_pll2_1000m 2 3 0 1000000000 0 0 50000 Y deviceless no_connection_id vpu_g2 0 1 0 500000000 0 0 50000 N deviceless no_connection_id vpu_g2_root_clk 0 1 0 500000000 0 0 50000 N 38310000.video-codec no_connection_id 38330000.blk-ctrl g2 power-domain@12 no_connection_id deviceless no_connection_id media_axi 1 1 0 500000000 0 0 50000 Y deviceless no_connection_id media_axi_root_clk 2 2 0 500000000 0 0 50000 Y 32e90000.display-controller disp_axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi power-domain@10 no_connection_id deviceless no_connection_id noc 1 1 0 1000000000 0 0 50000 Y 32700000.interconnect no_connection_id 32700000.interconnect no_connection_id deviceless no_connection_id sys_pll2_500m 2 2 0 500000000 0 0 50000 Y deviceless no_connection_id media_isp 0 0 0 500000000 0 0 50000 N deviceless no_connection_id media_isp_root_clk 0 0 0 500000000 0 0 50000 N 32ec0000.blk-ctrl isp power-domain@18 no_connection_id deviceless no_connection_id hsio_axi 3 3 0 500000000 0 0 50000 Y 33800000.pcie pcie_bus power-domain@17 no_connection_id deviceless no_connection_id usb_root_clk 2 2 0 500000000 0 0 50000 Y 38200000.usb bus_early 38100000.usb bus_early 32f10000.blk-ctrl usb deviceless no_connection_id hdmi_axi 0 0 0 500000000 0 0 50000 N deviceless no_connection_id hdmi_root_clk 0 0 0 500000000 0 0 50000 N 32fc0000.blk-ctrl axi 32fc0000.blk-ctrl axi 32fc0000.blk-ctrl axi power-domain@14 no_connection_id deviceless no_connection_id gic 1 1 0 500000000 0 0 50000 Y deviceless no_connection_id nand 0 0 0 500000000 0 0 50000 N deviceless no_connection_id nand_root_clk 0 0 0 500000000 0 0 50000 N deviceless no_connection_id sys_pll2_333m 0 0 0 333333333 0 0 50000 Y deviceless no_connection_id sys_pll2_250m 0 0 0 250000000 0 0 50000 Y deviceless no_connection_id sys_pll2_200m 0 0 0 200000000 0 0 50000 Y deviceless no_connection_id ecspi3 0 0 0 50000000 0 0 50000 N deviceless no_connection_id ecspi3_root_clk 0 0 0 50000000 0 0 50000 N deviceless no_connection_id ecspi2 0 0 0 50000000 0 0 50000 N deviceless no_connection_id ecspi2_root_clk 0 0 0 50000000 0 0 50000 N deviceless no_connection_id m7_core 0 0 0 200000000 0 0 50000 N deviceless no_connection_id sys_pll2_166m 0 0 0 166666666 0 0 50000 Y deviceless no_connection_id sys_pll2_125m 1 1 0 125000000 0 0 50000 Y deviceless no_connection_id enet_qos 0 0 0 125000000 0 0 50000 N 30bf0000.ethernet tx deviceless no_connection_id enet_ref 1 1 0 125000000 0 0 50000 Y 30be0000.ethernet enet_clk_ref deviceless no_connection_id sys_pll2_100m 1 1 0 100000000 0 0 50000 Y deviceless no_connection_id enet_qos_timer 0 0 0 100000000 0 0 50000 N 30bf0000.ethernet ptp_ref deviceless no_connection_id enet_timer 1 1 0 100000000 0 0 50000 Y 30be0000.ethernet ptp deviceless no_connection_id sys_pll2_50m 2 2 0 50000000 0 0 50000 Y deviceless no_connection_id pcie_aux 1 1 0 10000000 0 0 50000 Y deviceless no_connection_id pcie_root_clk 1 1 0 10000000 0 0 50000 Y 33800000.pcie pcie_aux 32f10000.blk-ctrl pcie deviceless no_connection_id enet_phy_ref 1 1 0 50000000 0 0 50000 Y 30be0000.ethernet enet_out deviceless no_connection_id sys_pll1_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id sys_pll1 1 1 0 800000000 0 0 50000 Y deviceless no_connection_id sys_pll1_bypass 1 1 0 800000000 0 0 50000 Y deviceless no_connection_id sys_pll1_out 4 4 0 800000000 0 0 50000 Y deviceless no_connection_id sys_pll1_800m 7 7 0 800000000 0 0 50000 Y deviceless no_connection_id gpu2d_core 0 0 0 800000000 0 0 50000 N deviceless no_connection_id gpu2d_root_clk 0 0 0 800000000 0 0 50000 N 38008000.gpu core power-domain@6 no_connection_id deviceless no_connection_id gpu3d_shader_core 0 0 0 800000000 0 0 50000 N 38000000.gpu shader power-domain@9 no_connection_id deviceless no_connection_id gpu3d_core 0 0 0 800000000 0 0 50000 N deviceless no_connection_id gpu3d_root_clk 0 0 0 800000000 0 0 50000 N 38000000.gpu core power-domain@9 no_connection_id deviceless no_connection_id ecspi1 1 1 0 80000000 0 0 50000 Y deviceless no_connection_id ecspi1_root_clk 2 2 0 80000000 0 0 50000 Y 30820000.spi per 30820000.spi ipg deviceless no_connection_id gpu_ahb 0 0 0 400000000 0 0 50000 N 38008000.gpu reg 38000000.gpu reg power-domain@7 no_connection_id deviceless no_connection_id gpu_axi 0 0 0 800000000 0 0 50000 N deviceless no_connection_id gpu_root_clk 0 0 0 800000000 0 0 50000 N 38008000.gpu bus 38000000.gpu bus power-domain@7 no_connection_id deviceless no_connection_id audio_axi 1 1 0 400000000 0 0 50000 Y power-domain@5 no_connection_id deviceless no_connection_id audio_axi_root 0 0 0 400000000 0 0 50000 Y deviceless no_connection_id audio_ahb 1 1 0 400000000 0 0 50000 Y deviceless no_connection_id audio_ahb_root 1 5 0 400000000 0 0 50000 Y 30e10000.dma-controller ahb 30e00000.dma-controller ahb power-domain@5 no_connection_id deviceless no_connection_id sai7_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai6_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai5_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai3_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai2_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai1_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id mu3_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id mu2_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id edma_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id dspdbg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id dsp_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id spba2_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sdma3_cg 0 1 0 400000000 0 0 50000 N 30e00000.dma-controller ipg deviceless no_connection_id sdma2_cg 0 1 0 400000000 0 0 50000 N 30e10000.dma-controller ipg deviceless no_connection_id aud2htx_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id ocrama_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id earc_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id pdm_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id asrc_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id ml_ahb 0 0 0 266666667 0 0 50000 N 38500000.npu reg power-domain@4 no_connection_id deviceless no_connection_id ml_axi 0 0 0 800000000 0 0 50000 N 38500000.npu bus power-domain@4 no_connection_id deviceless no_connection_id ml_core 0 0 0 800000000 0 0 50000 N deviceless no_connection_id npu_root_clk 0 0 0 800000000 0 0 50000 N 38500000.npu shader 38500000.npu core power-domain@4 no_connection_id deviceless no_connection_id noc_io 1 1 0 800000000 0 0 50000 Y deviceless no_connection_id arm_a53_div 0 0 0 800000000 0 0 50000 N deviceless no_connection_id dram_apb 1 1 0 160000000 0 0 50000 Y deviceless no_connection_id media_apb 1 1 0 200000000 0 0 50000 Y deviceless no_connection_id media_apb_root_clk 2 3 0 200000000 0 0 50000 Y 32e90000.display-controller axi blk-ctrl@32ec0000 no_connection_id 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb power-domain@10 no_connection_id deviceless no_connection_id main_axi 1 1 0 400000000 0 0 50000 Y 28c06000.etr apb_pclk 28c04000.etf apb_pclk 28c03000.funnel apb_pclk 28c03000.funnel apb_pclk deviceless no_connection_id sys_pll1_400m 1 1 0 400000000 0 0 50000 Y deviceless no_connection_id usdhc3 0 0 0 400000000 0 0 50000 N deviceless no_connection_id usdhc3_root_clk 0 0 0 400000000 0 0 50000 N 30b60000.mmc per deviceless no_connection_id usdhc2 0 0 0 200000000 0 0 50000 N deviceless no_connection_id usdhc2_root_clk 0 0 0 200000000 0 0 50000 N 30b50000.mmc per deviceless no_connection_id usdhc1 0 0 0 200000000 0 0 50000 N deviceless no_connection_id usdhc1_root_clk 0 0 0 200000000 0 0 50000 N deviceless no_connection_id qspi 1 1 0 80000000 0 0 50000 Y deviceless no_connection_id qspi_root_clk 2 2 0 80000000 0 0 50000 Y 30bb0000.spi fspi 30bb0000.spi fspi_en deviceless no_connection_id sys_pll1_266m 1 1 0 266666666 0 0 50000 Y deviceless no_connection_id nand_usdhc_bus 0 0 0 266666666 0 0 50000 N 30b50000.mmc ahb 30b60000.mmc ahb deviceless no_connection_id nand_usdhc_rawnand_clk 0 0 0 266666666 0 0 50000 N deviceless no_connection_id enet_axi 2 2 0 266666666 0 0 50000 Y deviceless no_connection_id sim_enet_root_clk 1 1 0 266666666 0 0 50000 Y 30be0000.ethernet ahb deviceless no_connection_id enet_qos_root_clk 0 0 0 266666666 0 0 50000 N 30bf0000.ethernet stmmaceth deviceless no_connection_id enet1_root_clk 1 1 0 266666666 0 0 50000 Y 30be0000.ethernet ipg deviceless no_connection_id sys_pll1_200m 0 0 0 200000000 0 0 50000 Y deviceless no_connection_id sys_pll1_160m 0 0 0 160000000 0 0 50000 Y deviceless no_connection_id sys_pll1_133m 1 1 0 133333333 0 0 50000 Y deviceless no_connection_id hdmi_apb 0 0 0 133333333 0 0 50000 N 32fc2000.interrupt-controller ipg 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb power-domain@14 no_connection_id deviceless no_connection_id ahb_root 5 4 0 133333333 0 0 50000 Y 30900000.crypto aclk 30bd0000.dma-controller ahb deviceless no_connection_id ipg_root 9 9 0 66666667 0 0 50000 Y 308d0000.can ipg 308c0000.can ipg 30900000.crypto ipg deviceless no_connection_id tsensor_root_clk 1 1 0 66666667 0 0 50000 Y 30260000.tmu no_connection_id deviceless no_connection_id hsio_root_clk 4 4 0 66666667 0 0 50000 Y 33800000.pcie pcie 32f10108.usb hsio 32f10100.usb hsio power-domain@17 no_connection_id deviceless no_connection_id sdma1_root_clk 2 1 0 66666667 0 0 50000 Y 30bd0000.dma-controller ipg deviceless no_connection_id qos_enet_root_clk 0 0 0 66666667 0 0 50000 N 30bf0000.ethernet pclk deviceless no_connection_id qos_root_clk 0 0 0 66666667 0 0 50000 N deviceless no_connection_id ocotp_root_clk 0 0 0 66666667 0 0 50000 N 30350000.efuse no_connection_id deviceless no_connection_id mu_root_clk 0 0 0 66666667 0 0 50000 N 30aa0000.mailbox no_connection_id deviceless no_connection_id gpio5_root_clk 1 1 0 66666667 0 0 50000 Y 30240000.gpio no_connection_id deviceless no_connection_id gpio4_root_clk 1 1 0 66666667 0 0 50000 Y 30230000.gpio no_connection_id deviceless no_connection_id gpio3_root_clk 1 1 0 66666667 0 0 50000 Y 30220000.gpio no_connection_id deviceless no_connection_id gpio2_root_clk 1 1 0 66666667 0 0 50000 Y 30210000.gpio no_connection_id deviceless no_connection_id gpio1_root_clk 1 1 0 66666667 0 0 50000 Y 30200000.gpio no_connection_id deviceless no_connection_id sys_pll1_100m 0 0 0 100000000 0 0 50000 Y deviceless no_connection_id dram_alt 0 0 0 100000000 0 0 50000 N deviceless no_connection_id dram_alt_root 0 0 0 25000000 0 0 50000 Y deviceless no_connection_id sys_pll1_80m 0 0 0 80000000 0 0 50000 Y deviceless no_connection_id uart2 0 0 0 80000000 0 0 50000 N deviceless no_connection_id uart2_root_clk 0 0 0 80000000 0 0 50000 N 30890000.serial per 30890000.serial ipg deviceless no_connection_id sys_pll1_40m 0 0 0 40000000 0 0 50000 Y deviceless no_connection_id can2 0 0 0 40000000 0 0 50000 N deviceless no_connection_id can2_root_clk 0 0 0 40000000 0 0 50000 N 308d0000.can per deviceless no_connection_id can1 0 0 0 40000000 0 0 50000 N deviceless no_connection_id can1_root_clk 0 0 0 40000000 0 0 50000 N 308c0000.can per deviceless no_connection_id wrclk 0 0 0 40000000 0 0 50000 N deviceless no_connection_id arm_pll_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id arm_pll 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm_pll_bypass 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm_pll_out 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm_a53_core 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm 1 1 0 1200000000 0 0 50000 Y cpu0 no_connection_id cpu0 no_connection_id deviceless no_connection_id vpu_pll_ref_sel 0 1 0 24000000 0 0 50000 Y deviceless no_connection_id vpu_pll 0 1 0 600000000 0 0 50000 Y deviceless no_connection_id vpu_pll_bypass 0 1 0 600000000 0 0 50000 Y deviceless no_connection_id vpu_pll_out 0 1 0 600000000 0 0 50000 N deviceless no_connection_id vpu_g1 0 1 0 600000000 0 0 50000 N deviceless no_connection_id vpu_g1_root_clk 0 1 0 600000000 0 0 50000 N 38300000.video-codec no_connection_id 38330000.blk-ctrl g1 power-domain@11 no_connection_id deviceless no_connection_id vpu_bus 0 0 0 300000000 0 0 50000 N deviceless no_connection_id vpu_root_clk 0 0 0 300000000 0 0 50000 N power-domain@8 no_connection_id deviceless no_connection_id gpu_pll_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id gpu_pll 0 0 0 1000000000 0 0 50000 Y deviceless no_connection_id gpu_pll_bypass 0 0 0 1000000000 0 0 50000 Y deviceless no_connection_id gpu_pll_out 0 0 0 1000000000 0 0 50000 N deviceless no_connection_id dram_pll_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id dram_pll 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id dram_pll_bypass 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id dram_pll_out 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id dram_core_clk 2 2 0 1000000000 0 0 50000 Y deviceless no_connection_id dram1_root_clk 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id video_pll1_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id video_pll1 1 1 0 72400000 0 0 50000 Y deviceless no_connection_id video_pll1_bypass 1 1 0 72400000 0 0 50000 Y deviceless no_connection_id video_pll1_out 2 2 0 72400000 0 0 50000 Y deviceless no_connection_id media_ldb 1 1 0 72400000 0 0 50000 Y deviceless no_connection_id media_ldb_root_clk 1 1 0 72400000 0 0 50000 Y 32ec0000.blk-ctrl:bridge@5c ldb deviceless no_connection_id media_disp2_pix 1 1 0 72400000 0 0 50000 Y deviceless no_connection_id media_disp2_pix_root_clk 1 1 0 72400000 0 0 50000 Y 32e90000.display-controller pix 32ec0000.blk-ctrl disp2 deviceless no_connection_id media_disp1_pix 0 0 0 72400000 0 0 50000 N deviceless no_connection_id media_disp1_pix_root_clk 0 0 0 72400000 0 0 50000 N 32ec0000.blk-ctrl disp1 deviceless no_connection_id media_mipi_phy1_ref 0 0 0 3290910 0 0 50000 N deviceless no_connection_id media_mipi_phy1_ref_root 0 0 0 3290910 0 0 50000 N 32ec0000.blk-ctrl phy 32ec0000.blk-ctrl phy deviceless no_connection_id audio_pll2_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id audio_pll2 0 0 0 361267200 0 0 50000 Y deviceless no_connection_id audio_pll2_bypass 0 0 0 361267200 0 0 50000 Y deviceless no_connection_id audio_pll2_out 0 0 0 361267200 0 0 50000 N deviceless no_connection_id audio_pll1_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id audio_pll1 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id audio_pll1_bypass 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id audio_pll1_out 0 0 0 393216000 0 0 50000 N deviceless no_connection_id clkout2_sel 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout2_div 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout2 0 0 0 393216000 0 0 50000 N deviceless no_connection_id clkout1_sel 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout1_div 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout1 0 0 0 393216000 0 0 50000 N deviceless no_connection_id osc_32k 1 1 0 32768 0 0 50000 Y clock-controller@30380000 osc_32k deviceless no_connection_id usb_suspend_clk 4 4 0 32768 0 0 50000 Y 38200000.usb suspend 38100000.usb suspend 32f10108.usb suspend 32f10100.usb suspend deviceless no_connection_id enable prepare protect duty hardware connection clock count count count rate accuracy phase cycle enable consumer id --------------------------------------------------------------------------------------------------------------------------------------------- rv3028-clkout 0 0 0 32768 0 0 50000 Y deviceless no_connection_id dummy 0 0 0 0 0 0 50000 Y 30b50000.mmc ipg 30b60000.mmc ipg deviceless no_connection_id ar0144-clk 0 0 0 27000000 0 0 50000 Y 2-0010 no_connection_id deviceless no_connection_id clk_ext4 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext4 deviceless no_connection_id clk_ext3 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext3 deviceless no_connection_id clk_ext2 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext2 deviceless no_connection_id clk_ext1 0 0 0 133000000 0 0 50000 Y clock-controller@30380000 clk_ext1 deviceless no_connection_id osc_24m 13 17 0 24000000 0 0 50000 Y clock-controller@30380000 osc_24m timer@306a0000 per deviceless no_connection_id media_mipi_phy1_ref 0 0 0 1090910 0 0 50000 N deviceless no_connection_id media_mipi_phy1_ref_root 0 0 0 1090910 0 0 50000 N 32e40000.csi phy 32ec0000.blk-ctrl phy 32ec0000.blk-ctrl phy deviceless no_connection_id usb_phy_ref 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id usb_phy_root_clk 2 2 0 24000000 0 0 50000 Y 382f0040.usb-phy phy 381f0040.usb-phy phy deviceless no_connection_id hsio_pll 1 1 0 100000000 0 0 50000 Y 32f00000.pcie-phy ref deviceless no_connection_id sai_pll_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai_pll 0 0 0 49152000 0 0 50000 Y deviceless no_connection_id sai_pll_bypass 0 0 0 49152000 0 0 50000 Y deviceless no_connection_id sai_pll_out 0 0 0 49152000 0 0 50000 N deviceless no_connection_id sai_pll_out_div2 0 0 0 24576000 0 0 50000 Y deviceless no_connection_id earc_phy_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai1_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai2_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai3_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai5_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai6_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id sai7_mclk3_cg 0 0 0 24576000 0 0 50000 N deviceless no_connection_id audpll_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai7_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id vpu_vc8000e 0 0 0 24000000 0 0 50000 N deviceless no_connection_id vpu_vc8ke_root_clk 0 0 0 24000000 0 0 50000 N 38330000.blk-ctrl vc8000e power-domain@13 no_connection_id deviceless no_connection_id pdm 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pdm_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id pdm_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id media_mipi_test_byte 0 0 0 24000000 0 0 50000 N deviceless no_connection_id mem_repair 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id media_cam2_pix 0 0 0 24000000 0 0 50000 N deviceless no_connection_id media_cam2_pix_root_clk 0 0 0 24000000 0 0 50000 N 32ec0000.blk-ctrl cam2 deviceless no_connection_id hdmi_24m 0 0 0 24000000 0 0 50000 N 32fdff00.phy ref 32fc0000.blk-ctrl ref_24m deviceless no_connection_id hdmi_pclk 0 0 0 74250000 0 0 50000 Y 32fd8000.hdmi pix deviceless no_connection_id hdmi_fdcc_tst 0 0 0 24000000 0 0 50000 N 32fc0000.blk-ctrl fdcc 32fc0000.blk-ctrl fdcc deviceless no_connection_id ipp_do_clko2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id ipp_do_clko1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id wdog 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id wdog3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id wdog2_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id wdog1_root_clk 1 1 0 24000000 0 0 50000 Y 30280000.watchdog no_connection_id deviceless no_connection_id gpt6 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt6_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt5 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt5_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt2_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id gpt1_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm3 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id pwm3_root_clk 2 2 0 24000000 0 0 50000 Y 30680000.pwm per 30680000.pwm ipg deviceless no_connection_id pwm2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm2_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id pwm1_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id usb_core_ref 2 2 0 24000000 0 0 50000 Y 38200000.usb ref 38100000.usb ref deviceless no_connection_id uart4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart3_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id uart1 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id uart1_root_clk 4 4 0 24000000 0 0 50000 Y 30860000.serial per 30860000.serial ipg deviceless no_connection_id i2c4 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c4_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c3 0 1 0 24000000 0 0 50000 N deviceless no_connection_id i2c3_root_clk 0 1 0 24000000 0 0 50000 N 30a40000.i2c no_connection_id deviceless no_connection_id i2c2 0 1 0 24000000 0 0 50000 N deviceless no_connection_id i2c2_root_clk 0 1 0 24000000 0 0 50000 N 30a30000.i2c no_connection_id deviceless no_connection_id i2c1 0 1 0 24000000 0 0 50000 N deviceless no_connection_id i2c1_root_clk 0 1 0 24000000 0 0 50000 N 30a20000.i2c no_connection_id deviceless no_connection_id sai6 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai6_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai6_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai6_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai5_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai3_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai2_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai7_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai7_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai6_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai6_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai5_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai5_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai3_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai3_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai2_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai2_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1_mclk2_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai1_mclk2_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1_mclk1_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sai1_mclk1_cg 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sai1_root 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c6 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c6_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c5 0 0 0 24000000 0 0 50000 N deviceless no_connection_id i2c5_root_clk 0 0 0 24000000 0 0 50000 N deviceless no_connection_id mipi_dsi_esc_rx 0 0 0 24000000 0 0 50000 N deviceless no_connection_id sys_pll3_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id sys_pll3 0 0 0 600000000 0 0 50000 Y deviceless no_connection_id sys_pll3_bypass 0 0 0 600000000 0 0 50000 Y deviceless no_connection_id sys_pll3_out 0 0 0 600000000 0 0 50000 N deviceless no_connection_id sys_pll2_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id sys_pll2 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id sys_pll2_bypass 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id sys_pll2_out 5 5 0 1000000000 0 0 50000 Y deviceless no_connection_id sys_pll2_1000m 2 3 0 1000000000 0 0 50000 Y deviceless no_connection_id vpu_g2 0 1 0 500000000 0 0 50000 N deviceless no_connection_id vpu_g2_root_clk 0 1 0 500000000 0 0 50000 N 38310000.video-codec no_connection_id 38330000.blk-ctrl g2 power-domain@12 no_connection_id deviceless no_connection_id media_axi 1 1 0 500000000 0 0 50000 Y deviceless no_connection_id media_axi_root_clk 2 2 0 500000000 0 0 50000 Y 32e10000.isp aclk 32e40000.csi axi 32e90000.display-controller disp_axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi 32ec0000.blk-ctrl axi power-domain@10 no_connection_id deviceless no_connection_id noc 1 1 0 1000000000 0 0 50000 Y 32700000.interconnect no_connection_id 32700000.interconnect no_connection_id deviceless no_connection_id sys_pll2_500m 3 3 0 500000000 0 0 50000 Y deviceless no_connection_id media_isp 0 0 0 500000000 0 0 50000 N deviceless no_connection_id media_isp_root_clk 0 0 0 500000000 0 0 50000 N 32e10000.isp isp 32ec0000.blk-ctrl isp power-domain@18 no_connection_id deviceless no_connection_id hsio_axi 3 3 0 500000000 0 0 50000 Y 33800000.pcie pcie_bus power-domain@17 no_connection_id deviceless no_connection_id usb_root_clk 2 2 0 500000000 0 0 50000 Y 38200000.usb bus_early 38100000.usb bus_early 32f10000.blk-ctrl usb deviceless no_connection_id hdmi_axi 1 1 0 500000000 0 0 50000 Y deviceless no_connection_id hdmi_root_clk 1 1 0 500000000 0 0 50000 Y 32fc0000.blk-ctrl axi 32fc0000.blk-ctrl axi 32fc0000.blk-ctrl axi power-domain@14 no_connection_id deviceless no_connection_id gic 1 1 0 500000000 0 0 50000 Y deviceless no_connection_id nand 0 0 0 500000000 0 0 50000 N deviceless no_connection_id nand_root_clk 0 0 0 500000000 0 0 50000 N deviceless no_connection_id sys_pll2_333m 0 0 0 333333333 0 0 50000 Y deviceless no_connection_id sys_pll2_250m 0 0 0 250000000 0 0 50000 Y deviceless no_connection_id media_cam1_pix 0 0 0 250000000 0 0 50000 N deviceless no_connection_id media_cam1_pix_root_clk 0 0 0 250000000 0 0 50000 N 32e40000.csi wrap 32ec0000.blk-ctrl cam1 deviceless no_connection_id sys_pll2_200m 0 0 0 200000000 0 0 50000 Y deviceless no_connection_id ecspi3 0 0 0 50000000 0 0 50000 N deviceless no_connection_id ecspi3_root_clk 0 0 0 50000000 0 0 50000 N deviceless no_connection_id ecspi2 0 0 0 50000000 0 0 50000 N deviceless no_connection_id ecspi2_root_clk 0 0 0 50000000 0 0 50000 N deviceless no_connection_id m7_core 0 0 0 200000000 0 0 50000 N deviceless no_connection_id sys_pll2_166m 0 0 0 166666666 0 0 50000 Y deviceless no_connection_id sys_pll2_125m 1 1 0 125000000 0 0 50000 Y deviceless no_connection_id enet_qos 0 0 0 125000000 0 0 50000 N 30bf0000.ethernet tx deviceless no_connection_id enet_ref 1 1 0 125000000 0 0 50000 Y 30be0000.ethernet enet_clk_ref deviceless no_connection_id sys_pll2_100m 1 1 0 100000000 0 0 50000 Y deviceless no_connection_id enet_qos_timer 0 0 0 100000000 0 0 50000 N 30bf0000.ethernet ptp_ref deviceless no_connection_id enet_timer 1 1 0 100000000 0 0 50000 Y 30be0000.ethernet ptp deviceless no_connection_id sys_pll2_50m 2 2 0 50000000 0 0 50000 Y deviceless no_connection_id pcie_aux 1 1 0 10000000 0 0 50000 Y deviceless no_connection_id pcie_root_clk 1 1 0 10000000 0 0 50000 Y 33800000.pcie pcie_aux 32f10000.blk-ctrl pcie deviceless no_connection_id enet_phy_ref 1 1 0 50000000 0 0 50000 Y 30be0000.ethernet enet_out deviceless no_connection_id sys_pll1_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id sys_pll1 1 1 0 800000000 0 0 50000 Y deviceless no_connection_id sys_pll1_bypass 1 1 0 800000000 0 0 50000 Y deviceless no_connection_id sys_pll1_out 4 4 0 800000000 0 0 50000 Y deviceless no_connection_id sys_pll1_800m 7 7 0 800000000 0 0 50000 Y deviceless no_connection_id gpu2d_core 0 0 0 800000000 0 0 50000 N deviceless no_connection_id gpu2d_root_clk 0 0 0 800000000 0 0 50000 N 38008000.gpu core power-domain@6 no_connection_id deviceless no_connection_id gpu3d_shader_core 0 0 0 800000000 0 0 50000 N 38000000.gpu shader power-domain@9 no_connection_id deviceless no_connection_id gpu3d_core 0 0 0 800000000 0 0 50000 N deviceless no_connection_id gpu3d_root_clk 0 0 0 800000000 0 0 50000 N 38000000.gpu core power-domain@9 no_connection_id deviceless no_connection_id ecspi1 1 1 0 80000000 0 0 50000 Y deviceless no_connection_id ecspi1_root_clk 2 2 0 80000000 0 0 50000 Y 30820000.spi per 30820000.spi ipg deviceless no_connection_id gpu_ahb 0 0 0 400000000 0 0 50000 N 38008000.gpu reg 38000000.gpu reg power-domain@7 no_connection_id deviceless no_connection_id gpu_axi 0 0 0 800000000 0 0 50000 N deviceless no_connection_id gpu_root_clk 0 0 0 800000000 0 0 50000 N 38008000.gpu bus 38000000.gpu bus power-domain@7 no_connection_id deviceless no_connection_id audio_axi 1 1 0 400000000 0 0 50000 Y power-domain@5 no_connection_id deviceless no_connection_id audio_axi_root 0 0 0 400000000 0 0 50000 Y deviceless no_connection_id audio_ahb 1 1 0 400000000 0 0 50000 Y deviceless no_connection_id audio_ahb_root 1 5 0 400000000 0 0 50000 Y 30e10000.dma-controller ahb 30e00000.dma-controller ahb power-domain@5 no_connection_id deviceless no_connection_id sai7_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai6_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai5_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai3_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai2_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sai1_ipg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id mu3_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id mu2_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id edma_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id dspdbg_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id dsp_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id spba2_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id sdma3_cg 0 1 0 400000000 0 0 50000 N 30e00000.dma-controller ipg deviceless no_connection_id sdma2_cg 0 1 0 400000000 0 0 50000 N 30e10000.dma-controller ipg deviceless no_connection_id aud2htx_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id ocrama_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id earc_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id pdm_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id asrc_cg 0 0 0 400000000 0 0 50000 N deviceless no_connection_id ml_ahb 0 0 0 266666667 0 0 50000 N 38500000.npu reg power-domain@4 no_connection_id deviceless no_connection_id ml_axi 0 0 0 800000000 0 0 50000 N 38500000.npu bus power-domain@4 no_connection_id deviceless no_connection_id ml_core 0 0 0 800000000 0 0 50000 N deviceless no_connection_id npu_root_clk 0 0 0 800000000 0 0 50000 N 38500000.npu shader 38500000.npu core power-domain@4 no_connection_id deviceless no_connection_id noc_io 1 1 0 800000000 0 0 50000 Y deviceless no_connection_id arm_a53_div 0 0 0 800000000 0 0 50000 N deviceless no_connection_id dram_apb 1 1 0 160000000 0 0 50000 Y deviceless no_connection_id media_apb 1 1 0 200000000 0 0 50000 Y deviceless no_connection_id media_apb_root_clk 2 3 0 200000000 0 0 50000 Y 32e10000.isp hclk 32e40000.csi pclk 32e90000.display-controller axi blk-ctrl@32ec0000 no_connection_id 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb 32ec0000.blk-ctrl apb power-domain@10 no_connection_id deviceless no_connection_id main_axi 1 1 0 400000000 0 0 50000 Y 28c06000.etr apb_pclk 28c04000.etf apb_pclk 28c03000.funnel apb_pclk 28c03000.funnel apb_pclk deviceless no_connection_id sys_pll1_400m 1 1 0 400000000 0 0 50000 Y deviceless no_connection_id usdhc3 0 0 0 400000000 0 0 50000 N deviceless no_connection_id usdhc3_root_clk 0 0 0 400000000 0 0 50000 N 30b60000.mmc per deviceless no_connection_id usdhc2 0 0 0 200000000 0 0 50000 N deviceless no_connection_id usdhc2_root_clk 0 0 0 200000000 0 0 50000 N 30b50000.mmc per deviceless no_connection_id usdhc1 0 0 0 200000000 0 0 50000 N deviceless no_connection_id usdhc1_root_clk 0 0 0 200000000 0 0 50000 N deviceless no_connection_id qspi 1 1 0 80000000 0 0 50000 Y deviceless no_connection_id qspi_root_clk 2 2 0 80000000 0 0 50000 Y 30bb0000.spi fspi 30bb0000.spi fspi_en deviceless no_connection_id sys_pll1_266m 2 2 0 266666666 0 0 50000 Y deviceless no_connection_id hdmi_ref_266m 1 1 0 266666666 0 0 50000 Y 32fd8000.hdmi isfr 32fc0000.blk-ctrl ref_266m deviceless no_connection_id nand_usdhc_bus 0 0 0 266666666 0 0 50000 N 30b50000.mmc ahb 30b60000.mmc ahb deviceless no_connection_id nand_usdhc_rawnand_clk 0 0 0 266666666 0 0 50000 N deviceless no_connection_id enet_axi 2 2 0 266666666 0 0 50000 Y deviceless no_connection_id sim_enet_root_clk 1 1 0 266666666 0 0 50000 Y 30be0000.ethernet ahb deviceless no_connection_id enet_qos_root_clk 0 0 0 266666666 0 0 50000 N 30bf0000.ethernet stmmaceth deviceless no_connection_id enet1_root_clk 1 1 0 266666666 0 0 50000 Y 30be0000.ethernet ipg deviceless no_connection_id sys_pll1_200m 0 0 0 200000000 0 0 50000 Y deviceless no_connection_id sys_pll1_160m 0 0 0 160000000 0 0 50000 Y deviceless no_connection_id sys_pll1_133m 2 2 0 133333333 0 0 50000 Y deviceless no_connection_id hdmi_apb 4 4 0 133333333 0 0 50000 Y 32fd8000.hdmi iahb 32fdff00.phy apb 32fc2000.interrupt-controller ipg 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb 32fc0000.blk-ctrl apb power-domain@14 no_connection_id deviceless no_connection_id ahb_root 5 4 0 133333333 0 0 50000 Y 30bd0000.dma-controller ahb 30900000.crypto aclk deviceless no_connection_id ipg_root 9 9 0 66666667 0 0 50000 Y 308d0000.can ipg 308c0000.can ipg 30900000.crypto ipg deviceless no_connection_id tsensor_root_clk 1 1 0 66666667 0 0 50000 Y 30260000.tmu no_connection_id deviceless no_connection_id hsio_root_clk 4 4 0 66666667 0 0 50000 Y 33800000.pcie pcie 32f10108.usb hsio 32f10100.usb hsio power-domain@17 no_connection_id deviceless no_connection_id sdma1_root_clk 2 1 0 66666667 0 0 50000 Y 30bd0000.dma-controller ipg deviceless no_connection_id qos_enet_root_clk 0 0 0 66666667 0 0 50000 N 30bf0000.ethernet pclk deviceless no_connection_id qos_root_clk 0 0 0 66666667 0 0 50000 N deviceless no_connection_id ocotp_root_clk 0 0 0 66666667 0 0 50000 N 30350000.efuse no_connection_id deviceless no_connection_id mu_root_clk 0 0 0 66666667 0 0 50000 N 30aa0000.mailbox no_connection_id deviceless no_connection_id gpio5_root_clk 1 1 0 66666667 0 0 50000 Y 30240000.gpio no_connection_id deviceless no_connection_id gpio4_root_clk 1 1 0 66666667 0 0 50000 Y 30230000.gpio no_connection_id deviceless no_connection_id gpio3_root_clk 1 1 0 66666667 0 0 50000 Y 30220000.gpio no_connection_id deviceless no_connection_id gpio2_root_clk 1 1 0 66666667 0 0 50000 Y 30210000.gpio no_connection_id deviceless no_connection_id gpio1_root_clk 1 1 0 66666667 0 0 50000 Y 30200000.gpio no_connection_id deviceless no_connection_id sys_pll1_100m 0 0 0 100000000 0 0 50000 Y deviceless no_connection_id dram_alt 0 0 0 100000000 0 0 50000 N deviceless no_connection_id dram_alt_root 0 0 0 25000000 0 0 50000 Y deviceless no_connection_id sys_pll1_80m 0 0 0 80000000 0 0 50000 Y deviceless no_connection_id uart2 0 0 0 80000000 0 0 50000 N deviceless no_connection_id uart2_root_clk 0 0 0 80000000 0 0 50000 N 30890000.serial per 30890000.serial ipg deviceless no_connection_id sys_pll1_40m 0 0 0 40000000 0 0 50000 Y deviceless no_connection_id can2 0 0 0 40000000 0 0 50000 N deviceless no_connection_id can2_root_clk 0 0 0 40000000 0 0 50000 N 308d0000.can per deviceless no_connection_id can1 0 0 0 40000000 0 0 50000 N deviceless no_connection_id can1_root_clk 0 0 0 40000000 0 0 50000 N 308c0000.can per deviceless no_connection_id wrclk 0 0 0 40000000 0 0 50000 N deviceless no_connection_id arm_pll_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id arm_pll 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm_pll_bypass 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm_pll_out 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm_a53_core 1 1 0 1200000000 0 0 50000 Y deviceless no_connection_id arm 1 1 0 1200000000 0 0 50000 Y cpu0 no_connection_id cpu0 no_connection_id deviceless no_connection_id vpu_pll_ref_sel 0 1 0 24000000 0 0 50000 Y deviceless no_connection_id vpu_pll 0 1 0 600000000 0 0 50000 Y deviceless no_connection_id vpu_pll_bypass 0 1 0 600000000 0 0 50000 Y deviceless no_connection_id vpu_pll_out 0 1 0 600000000 0 0 50000 N deviceless no_connection_id vpu_g1 0 1 0 600000000 0 0 50000 N deviceless no_connection_id vpu_g1_root_clk 0 1 0 600000000 0 0 50000 N 38300000.video-codec no_connection_id 38330000.blk-ctrl g1 power-domain@11 no_connection_id deviceless no_connection_id vpu_bus 0 0 0 300000000 0 0 50000 N deviceless no_connection_id vpu_root_clk 0 0 0 300000000 0 0 50000 N power-domain@8 no_connection_id deviceless no_connection_id gpu_pll_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id gpu_pll 0 0 0 1000000000 0 0 50000 Y deviceless no_connection_id gpu_pll_bypass 0 0 0 1000000000 0 0 50000 Y deviceless no_connection_id gpu_pll_out 0 0 0 1000000000 0 0 50000 N deviceless no_connection_id dram_pll_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id dram_pll 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id dram_pll_bypass 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id dram_pll_out 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id dram_core_clk 2 2 0 1000000000 0 0 50000 Y deviceless no_connection_id dram1_root_clk 1 1 0 1000000000 0 0 50000 Y deviceless no_connection_id video_pll1_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id video_pll1 1 1 0 1039500000 0 0 50000 Y deviceless no_connection_id video_pll1_bypass 1 1 0 1039500000 0 0 50000 Y deviceless no_connection_id video_pll1_out 2 2 0 1039500000 0 0 50000 Y deviceless no_connection_id media_ldb 1 1 0 519750000 0 0 50000 Y deviceless no_connection_id media_ldb_root_clk 1 1 0 519750000 0 0 50000 Y 32ec0000.blk-ctrl:bridge@5c ldb deviceless no_connection_id media_disp2_pix 1 1 0 74250000 0 0 50000 Y deviceless no_connection_id media_disp2_pix_root_clk 1 1 0 74250000 0 0 50000 Y 32e90000.display-controller pix 32ec0000.blk-ctrl disp2 deviceless no_connection_id media_disp1_pix 0 0 0 1039500000 0 0 50000 N deviceless no_connection_id media_disp1_pix_root_clk 0 0 0 1039500000 0 0 50000 N 32ec0000.blk-ctrl disp1 deviceless no_connection_id audio_pll2_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id audio_pll2 0 0 0 361267200 0 0 50000 Y deviceless no_connection_id audio_pll2_bypass 0 0 0 361267200 0 0 50000 Y deviceless no_connection_id audio_pll2_out 0 0 0 361267200 0 0 50000 N deviceless no_connection_id audio_pll1_ref_sel 0 0 0 24000000 0 0 50000 Y deviceless no_connection_id audio_pll1 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id audio_pll1_bypass 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id audio_pll1_out 0 0 0 393216000 0 0 50000 N deviceless no_connection_id clkout2_sel 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout2_div 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout2 0 0 0 393216000 0 0 50000 N deviceless no_connection_id clkout1_sel 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout1_div 0 0 0 393216000 0 0 50000 Y deviceless no_connection_id clkout1 0 0 0 393216000 0 0 50000 N deviceless no_connection_id osc_32k 2 2 0 32768 0 0 50000 Y 32fd8000.hdmi cec clock-controller@30380000 osc_32k deviceless no_connection_id usb_suspend_clk 4 4 0 32768 0 0 50000 Y 38200000.usb suspend 38100000.usb suspend 32f10108.usb suspend 32f10100.usb suspend deviceless no_connection_id
On 10/8/24 12:07 PM, Isaac Scott wrote: > On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: >> On 10/7/24 7:01 PM, Isaac Scott wrote: >>> Hi Marek, >> >> Hi, >> >>> On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: >>>> On 6/24/24 11:19 AM, Alexander Stein wrote: >>>>> Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: >>>>>> In case an upstream bridge modified the required clock >>>>>> frequency >>>>>> in its .atomic_check callback by setting adjusted_mode.clock >>>>>> , >>>>>> make sure that clock frequency is generated by the LCDIFv3 >>>>>> block. >>>>>> >>>>>> This is useful e.g. when LCDIFv3 feeds DSIM which feeds >>>>>> TC358767 >>>>>> with (e)DP output, where the TC358767 expects precise timing >>>>>> on >>>>>> its input side, the precise timing must be generated by the >>>>>> LCDIF. >>>>>> >>>>>> Signed-off-by: Marek Vasut <marex@denx.de> >>>>> >>>>> With the other rc358767 patches in place, this does the trick. >>>>> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> >>>> >>>> I'll pick this up next week if there is no objection. >>> >>> Unfortunately, this has caused a regression that is present in >>> v6.12- >>> rc1 on the i.MX8MP PHYTEC Pollux using the >>> arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. The >>> display is the edt,etml1010g3dra panel, as per the upstream dts. We >>> bisected to this commit, and reverting this change fixed the >>> screen. >>> >>> We then tried to retest this on top of v6.12-rc2, and found we also >>> had >>> to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 ("clk: >>> imx: >>> clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate") >>> alongside this. Reverting these two commits makes the display work >>> again at -rc2. >>> >>> Do you have any suggestions on anything we might be missing on our >>> end? >>> Please let me know if there's anything you'd like me to test as I'm >>> not >>> sure what the underlying fault was here. >> I believe what is going on is that the LCDIF cannot configure its >> upstream clock because something else is already using those clock >> and >> it set those clock to a specific frequency. LCDIF is now trying to >> configure those clock to match the LVDS panel, and it fails, so it >> tries >> to set some approximate clock and that is not good enough for the >> LVDS >> panel. >> >> Can you share dump of /sys/kernel/debug/clk/clk_summary on failing >> and >> working system ? You might see the difference around the "video" >> clock. >> >> (I have seen this behavior before, the fix was usually a matter of >> moving one of the LCDIFs to another upstream clock like PLL3, so it >> can >> pick well matching output clock instead of some horrid approximation >> which then drives the panel likely out of specification) > > Hi Marek, > > Please find attached the clk_summary for v6.12-rc2 before and after the > reversion (the one after the reversion is 6.12-rc2_summary_postfix). How come "media_mipi_phy1_ref" is on Video PLL1 before the revert ? Does it start working if you move "media_mipi_phy1_ref" to osc_24m ? (probably not) Also, why is the LDB configured to 74 MHz instead of 519 MHz now ? That is really odd. I'll see if I can reproduce this later today.
On 10/8/24 12:07 PM, Isaac Scott wrote: > On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: >> On 10/7/24 7:01 PM, Isaac Scott wrote: >>> Hi Marek, >> >> Hi, >> >>> On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: >>>> On 6/24/24 11:19 AM, Alexander Stein wrote: >>>>> Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: >>>>>> In case an upstream bridge modified the required clock >>>>>> frequency >>>>>> in its .atomic_check callback by setting adjusted_mode.clock >>>>>> , >>>>>> make sure that clock frequency is generated by the LCDIFv3 >>>>>> block. >>>>>> >>>>>> This is useful e.g. when LCDIFv3 feeds DSIM which feeds >>>>>> TC358767 >>>>>> with (e)DP output, where the TC358767 expects precise timing >>>>>> on >>>>>> its input side, the precise timing must be generated by the >>>>>> LCDIF. >>>>>> >>>>>> Signed-off-by: Marek Vasut <marex@denx.de> >>>>> >>>>> With the other rc358767 patches in place, this does the trick. >>>>> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> >>>> >>>> I'll pick this up next week if there is no objection. >>> >>> Unfortunately, this has caused a regression that is present in >>> v6.12- >>> rc1 on the i.MX8MP PHYTEC Pollux using the >>> arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. The >>> display is the edt,etml1010g3dra panel, as per the upstream dts. We >>> bisected to this commit, and reverting this change fixed the >>> screen. >>> >>> We then tried to retest this on top of v6.12-rc2, and found we also >>> had >>> to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 ("clk: >>> imx: >>> clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate") >>> alongside this. Reverting these two commits makes the display work >>> again at -rc2. >>> >>> Do you have any suggestions on anything we might be missing on our >>> end? >>> Please let me know if there's anything you'd like me to test as I'm >>> not >>> sure what the underlying fault was here. >> I believe what is going on is that the LCDIF cannot configure its >> upstream clock because something else is already using those clock >> and >> it set those clock to a specific frequency. LCDIF is now trying to >> configure those clock to match the LVDS panel, and it fails, so it >> tries >> to set some approximate clock and that is not good enough for the >> LVDS >> panel. >> >> Can you share dump of /sys/kernel/debug/clk/clk_summary on failing >> and >> working system ? You might see the difference around the "video" >> clock. >> >> (I have seen this behavior before, the fix was usually a matter of >> moving one of the LCDIFs to another upstream clock like PLL3, so it >> can >> pick well matching output clock instead of some horrid approximation >> which then drives the panel likely out of specification) > > Hi Marek, > > Please find attached the clk_summary for v6.12-rc2 before and after the > reversion (the one after the reversion is 6.12-rc2_summary_postfix). Thank you, this helped greatly. I believe I know why it used to kind-of work for you, but I'm afraid this used to work by sheer chance and it does not really work correctly for the panel you use, even if the panel likely does show the correct content. But, there is a way to make it work properly for the panel you use. First of all, the pixel clock never really matched the panel-simple.c pixel clock for the edt_etml1010g3dra_timing: $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix media_disp2_pix 1 1 0 74250000 ... ^^^^^^^^ $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel-simple.c static const struct display_timing edt_etml1010g3dra_timing = { .pixelclock = { 66300000, 72400000, 78900000 }, ^^^^^^^^ The pixel clock are within tolerance, but there is a discrepancy 74250000 != 72400000 . Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes") the IMX8MP_VIDEO_PLL1_OUT is set to a very specific frequency of 1039500000 Hz, which tidily divides by 2 to 519750000 Hz (which is your LVDS serializer frequency) and divides by 7 to 74250000 Hz which is your LCDIF pixel clock. This Video PLL1 configuration since moved to &media_blk_ctrl {} , but it is still in the imx8mp.dtsi . Therefore, to make your panel work at the correct desired pixel clock frequency instead of some random one inherited from imx8mp.dtsi, add the following to the pollux DT, I believe that will fix the problem and is the correct fix: &media_blk_ctrl { // 506800000 = 72400000 * 7 (for single-link LVDS, this is enough) // there is no need to multiply the clock by * 2 assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <500000000>, <506800000>; }; Can you please test whether this works and the pixel clock are accurate in /sys/kernel/debug/clk/clk_summary ? Now ... as for the LVDS serializer clock ... that is more complicated. The LCDIF driver does its .atomic_enable first , configures the pixel clock (and the Video PLL now) and enables the clock. The LVDS LDB serializer driver does its .atomic_enable second and cannot reconfigure the clock anymore, the Video PLL is stuck at /7 rate set by LCDIF driver and won't budge because the clock are already enabled. I'm currently trying to figure out if this can be improved somehow, but I believe that would be material for next release.
On Tue, 2024-10-08 at 23:48 +0200, Marek Vasut wrote: > On 10/8/24 12:07 PM, Isaac Scott wrote: > > On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: > > > On 10/7/24 7:01 PM, Isaac Scott wrote: > > > > Hi Marek, > > > > > > Hi, > > > > > > > On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: > > > > > On 6/24/24 11:19 AM, Alexander Stein wrote: > > > > > > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek > > > > > > Vasut: > > > > > > > In case an upstream bridge modified the required clock > > > > > > > frequency > > > > > > > in its .atomic_check callback by setting > > > > > > > adjusted_mode.clock > > > > > > > , > > > > > > > make sure that clock frequency is generated by the > > > > > > > LCDIFv3 > > > > > > > block. > > > > > > > > > > > > > > This is useful e.g. when LCDIFv3 feeds DSIM which feeds > > > > > > > TC358767 > > > > > > > with (e)DP output, where the TC358767 expects precise > > > > > > > timing > > > > > > > on > > > > > > > its input side, the precise timing must be generated by > > > > > > > the > > > > > > > LCDIF. > > > > > > > > > > > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > > > > > > > > > > With the other rc358767 patches in place, this does the > > > > > > trick. > > > > > > Reviewed-by: Alexander Stein > > > > > > <alexander.stein@ew.tq-group.com> > > > > > > > > > > I'll pick this up next week if there is no objection. > > > > > > > > Unfortunately, this has caused a regression that is present in > > > > v6.12- > > > > rc1 on the i.MX8MP PHYTEC Pollux using the > > > > arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. > > > > The > > > > display is the edt,etml1010g3dra panel, as per the upstream > > > > dts. We > > > > bisected to this commit, and reverting this change fixed the > > > > screen. > > > > > > > > We then tried to retest this on top of v6.12-rc2, and found we > > > > also > > > > had > > > > to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 > > > > ("clk: > > > > imx: > > > > clk-imx8mp: Allow media_disp pixel clock reconfigure parent > > > > rate") > > > > alongside this. Reverting these two commits makes the display > > > > work > > > > again at -rc2. > > > > > > > > Do you have any suggestions on anything we might be missing on > > > > our > > > > end? > > > > Please let me know if there's anything you'd like me to test as > > > > I'm > > > > not > > > > sure what the underlying fault was here. > > > I believe what is going on is that the LCDIF cannot configure its > > > upstream clock because something else is already using those > > > clock > > > and > > > it set those clock to a specific frequency. LCDIF is now trying > > > to > > > configure those clock to match the LVDS panel, and it fails, so > > > it > > > tries > > > to set some approximate clock and that is not good enough for the > > > LVDS > > > panel. > > > > > > Can you share dump of /sys/kernel/debug/clk/clk_summary on > > > failing > > > and > > > working system ? You might see the difference around the "video" > > > clock. > > > > > > (I have seen this behavior before, the fix was usually a matter > > > of > > > moving one of the LCDIFs to another upstream clock like PLL3, so > > > it > > > can > > > pick well matching output clock instead of some horrid > > > approximation > > > which then drives the panel likely out of specification) > > > > Hi Marek, > > > > Please find attached the clk_summary for v6.12-rc2 before and after > > the > > reversion (the one after the reversion is 6.12- > > rc2_summary_postfix). > Thank you, this helped greatly. > > I believe I know why it used to kind-of work for you, but I'm afraid > this used to work by sheer chance and it does not really work > correctly > for the panel you use, even if the panel likely does show the correct > content. But, there is a way to make it work properly for the panel > you use. > > First of all, the pixel clock never really matched the panel-simple.c > pixel clock for the edt_etml1010g3dra_timing: > > $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix > media_disp2_pix 1 1 0 74250000 ... > ^^^^^^^^ > > $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel- > simple.c > static const struct display_timing edt_etml1010g3dra_timing = { > .pixelclock = { 66300000, 72400000, 78900000 }, > ^^^^^^^^ > > The pixel clock are within tolerance, but there is a discrepancy > 74250000 != 72400000 . > > Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB > nodes") > the IMX8MP_VIDEO_PLL1_OUT is set to a very specific frequency of > 1039500000 Hz, which tidily divides by 2 to 519750000 Hz (which is > your > LVDS serializer frequency) and divides by 7 to 74250000 Hz which is > your > LCDIF pixel clock. > > This Video PLL1 configuration since moved to &media_blk_ctrl {} , but > it > is still in the imx8mp.dtsi . Therefore, to make your panel work at > the > correct desired pixel clock frequency instead of some random one > inherited from imx8mp.dtsi, add the following to the pollux DT, I > believe that will fix the problem and is the correct fix: > > &media_blk_ctrl { > // 506800000 = 72400000 * 7 (for single-link LVDS, this is > enough) > // there is no need to multiply the clock by * 2 > assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, > <500000000>, <506800000>; > }; > > Can you please test whether this works and the pixel clock are > accurate > in /sys/kernel/debug/clk/clk_summary ? Interestingly, after making the change you suggested to imx8mp- phyboard-pollux-rdk.dts before the two reversions, the display now seems to work. Please see below for the relevant section of the new clk_summary referring to media_disp2_pix: video_pll1_ref_sel 1 1 0 24000000 0 0 50000 Y deviceless no_connection_id video_pll1 1 1 0 506800000 0 0 50000 Y deviceless no_connection_ video_pll1_bypass 1 1 0 506800000 0 0 50000 Y deviceless no_connecti video_pll1_out 2 2 0 506800000 0 0 50000 Y deviceless no_conne media_ldb 1 1 0 506800000 0 0 50000 Y deviceless no_co media_ldb_root_clk 1 1 0 506800000 0 0 50000 Y 32ec0000.blk-ctrl:bridge@5c l deviceless no media_disp2_pix 1 1 0 72400000 0 0 50000 Y deviceless no_co media_disp2_pix_root_clk 1 1 0 72400000 0 0 50000 Y 32e90000.display-controller 32ec0000.blk-ctrl di deviceless no media_disp1_pix 0 0 0 506800000 0 0 50000 N deviceless no_co media_disp1_pix_root_clk 0 0 0 506800000 0 0 50000 N 32ec0000.blk-ctrl deviceless no media_mipi_phy1_ref 0 0 0 23036364 0 0 50000 N deviceless no_co media_mipi_phy1_ref_root 0 0 0 23036364 0 0 50000 N 32ec0000.blk-ctrl The media_disp2_pix clock now seems to be correct at 724000000 after your changes.
On 10/9/24 11:55 AM, Isaac Scott wrote: > On Tue, 2024-10-08 at 23:48 +0200, Marek Vasut wrote: >> On 10/8/24 12:07 PM, Isaac Scott wrote: >>> On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: >>>> On 10/7/24 7:01 PM, Isaac Scott wrote: >>>>> Hi Marek, >>>> >>>> Hi, >>>> >>>>> On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: >>>>>> On 6/24/24 11:19 AM, Alexander Stein wrote: >>>>>>> Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek >>>>>>> Vasut: >>>>>>>> In case an upstream bridge modified the required clock >>>>>>>> frequency >>>>>>>> in its .atomic_check callback by setting >>>>>>>> adjusted_mode.clock >>>>>>>> , >>>>>>>> make sure that clock frequency is generated by the >>>>>>>> LCDIFv3 >>>>>>>> block. >>>>>>>> >>>>>>>> This is useful e.g. when LCDIFv3 feeds DSIM which feeds >>>>>>>> TC358767 >>>>>>>> with (e)DP output, where the TC358767 expects precise >>>>>>>> timing >>>>>>>> on >>>>>>>> its input side, the precise timing must be generated by >>>>>>>> the >>>>>>>> LCDIF. >>>>>>>> >>>>>>>> Signed-off-by: Marek Vasut <marex@denx.de> >>>>>>> >>>>>>> With the other rc358767 patches in place, this does the >>>>>>> trick. >>>>>>> Reviewed-by: Alexander Stein >>>>>>> <alexander.stein@ew.tq-group.com> >>>>>> >>>>>> I'll pick this up next week if there is no objection. >>>>> >>>>> Unfortunately, this has caused a regression that is present in >>>>> v6.12- >>>>> rc1 on the i.MX8MP PHYTEC Pollux using the >>>>> arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. >>>>> The >>>>> display is the edt,etml1010g3dra panel, as per the upstream >>>>> dts. We >>>>> bisected to this commit, and reverting this change fixed the >>>>> screen. >>>>> >>>>> We then tried to retest this on top of v6.12-rc2, and found we >>>>> also >>>>> had >>>>> to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 >>>>> ("clk: >>>>> imx: >>>>> clk-imx8mp: Allow media_disp pixel clock reconfigure parent >>>>> rate") >>>>> alongside this. Reverting these two commits makes the display >>>>> work >>>>> again at -rc2. >>>>> >>>>> Do you have any suggestions on anything we might be missing on >>>>> our >>>>> end? >>>>> Please let me know if there's anything you'd like me to test as >>>>> I'm >>>>> not >>>>> sure what the underlying fault was here. >>>> I believe what is going on is that the LCDIF cannot configure its >>>> upstream clock because something else is already using those >>>> clock >>>> and >>>> it set those clock to a specific frequency. LCDIF is now trying >>>> to >>>> configure those clock to match the LVDS panel, and it fails, so >>>> it >>>> tries >>>> to set some approximate clock and that is not good enough for the >>>> LVDS >>>> panel. >>>> >>>> Can you share dump of /sys/kernel/debug/clk/clk_summary on >>>> failing >>>> and >>>> working system ? You might see the difference around the "video" >>>> clock. >>>> >>>> (I have seen this behavior before, the fix was usually a matter >>>> of >>>> moving one of the LCDIFs to another upstream clock like PLL3, so >>>> it >>>> can >>>> pick well matching output clock instead of some horrid >>>> approximation >>>> which then drives the panel likely out of specification) >>> >>> Hi Marek, >>> >>> Please find attached the clk_summary for v6.12-rc2 before and after >>> the >>> reversion (the one after the reversion is 6.12- >>> rc2_summary_postfix). >> Thank you, this helped greatly. >> >> I believe I know why it used to kind-of work for you, but I'm afraid >> this used to work by sheer chance and it does not really work >> correctly >> for the panel you use, even if the panel likely does show the correct >> content. But, there is a way to make it work properly for the panel >> you use. >> >> First of all, the pixel clock never really matched the panel-simple.c >> pixel clock for the edt_etml1010g3dra_timing: >> >> $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix >> media_disp2_pix 1 1 0 74250000 ... >> ^^^^^^^^ >> >> $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel- >> simple.c >> static const struct display_timing edt_etml1010g3dra_timing = { >> .pixelclock = { 66300000, 72400000, 78900000 }, >> ^^^^^^^^ >> >> The pixel clock are within tolerance, but there is a discrepancy >> 74250000 != 72400000 . >> >> Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB >> nodes") >> the IMX8MP_VIDEO_PLL1_OUT is set to a very specific frequency of >> 1039500000 Hz, which tidily divides by 2 to 519750000 Hz (which is >> your >> LVDS serializer frequency) and divides by 7 to 74250000 Hz which is >> your >> LCDIF pixel clock. >> >> This Video PLL1 configuration since moved to &media_blk_ctrl {} , but >> it >> is still in the imx8mp.dtsi . Therefore, to make your panel work at >> the >> correct desired pixel clock frequency instead of some random one >> inherited from imx8mp.dtsi, add the following to the pollux DT, I >> believe that will fix the problem and is the correct fix: >> >> &media_blk_ctrl { >> // 506800000 = 72400000 * 7 (for single-link LVDS, this is >> enough) >> // there is no need to multiply the clock by * 2 >> assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, >> <500000000>, <506800000>; >> }; >> >> Can you please test whether this works and the pixel clock are >> accurate >> in /sys/kernel/debug/clk/clk_summary ? > > Interestingly, after making the change you suggested to imx8mp- > phyboard-pollux-rdk.dts before the two reversions, the display now > seems to work. Please see below for the relevant section of the new > clk_summary referring to media_disp2_pix: > > video_pll1_ref_sel 1 1 0 24000000 > 0 0 50000 Y deviceless > no_connection_id > video_pll1 1 1 0 > 506800000 0 0 50000 Y deviceless > no_connection_ > video_pll1_bypass 1 1 0 > 506800000 0 0 50000 Y deviceless > no_connecti > video_pll1_out 2 2 0 > 506800000 0 0 50000 Y deviceless > no_conne > media_ldb 1 1 0 > 506800000 0 0 50000 Y deviceless > no_co > media_ldb_root_clk 1 1 0 > 506800000 0 0 50000 Y > 32ec0000.blk-ctrl:bridge@5c l > > deviceless no > media_disp2_pix 1 1 0 72400000 > 0 0 50000 Y deviceless > no_co > media_disp2_pix_root_clk 1 1 0 > 72400000 0 0 50000 Y > 32e90000.display-controller > > 32ec0000.blk-ctrl di > > deviceless no > media_disp1_pix 0 0 0 > 506800000 0 0 50000 N deviceless > no_co > media_disp1_pix_root_clk 0 0 0 > 506800000 0 0 50000 N > 32ec0000.blk-ctrl > > deviceless no > media_mipi_phy1_ref 0 0 0 23036364 > 0 0 50000 N deviceless > no_co > media_mipi_phy1_ref_root 0 0 0 > 23036364 0 0 50000 N > 32ec0000.blk-ctrl > > The media_disp2_pix clock now seems to be correct at 724000000 after > your changes. Do you want to submit the DT patch with correct Fixes: tag ? :)
On Wed, 2024-10-09 at 17:47 +0200, Marek Vasut wrote: > On 10/9/24 11:55 AM, Isaac Scott wrote: > > On Tue, 2024-10-08 at 23:48 +0200, Marek Vasut wrote: > > > On 10/8/24 12:07 PM, Isaac Scott wrote: > > > > On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: > > > > > On 10/7/24 7:01 PM, Isaac Scott wrote: > > > > > > Hi Marek, > > > > > > > > > > Hi, > > > > > > > > > > > On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: > > > > > > > On 6/24/24 11:19 AM, Alexander Stein wrote: > > > > > > > > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek > > > > > > > > Vasut: > > > > > > > > > In case an upstream bridge modified the required > > > > > > > > > clock > > > > > > > > > frequency > > > > > > > > > in its .atomic_check callback by setting > > > > > > > > > adjusted_mode.clock > > > > > > > > > , > > > > > > > > > make sure that clock frequency is generated by the > > > > > > > > > LCDIFv3 > > > > > > > > > block. > > > > > > > > > > > > > > > > > > This is useful e.g. when LCDIFv3 feeds DSIM which > > > > > > > > > feeds > > > > > > > > > TC358767 > > > > > > > > > with (e)DP output, where the TC358767 expects precise > > > > > > > > > timing > > > > > > > > > on > > > > > > > > > its input side, the precise timing must be generated > > > > > > > > > by > > > > > > > > > the > > > > > > > > > LCDIF. > > > > > > > > > > > > > > > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > > > > > > > > > > > > > > With the other rc358767 patches in place, this does the > > > > > > > > trick. > > > > > > > > Reviewed-by: Alexander Stein > > > > > > > > <alexander.stein@ew.tq-group.com> > > > > > > > > > > > > > > I'll pick this up next week if there is no objection. > > > > > > > > > > > > Unfortunately, this has caused a regression that is present > > > > > > in > > > > > > v6.12- > > > > > > rc1 on the i.MX8MP PHYTEC Pollux using the > > > > > > arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux- > > > > > > rdk.dts. > > > > > > The > > > > > > display is the edt,etml1010g3dra panel, as per the upstream > > > > > > dts. We > > > > > > bisected to this commit, and reverting this change fixed > > > > > > the > > > > > > screen. > > > > > > > > > > > > We then tried to retest this on top of v6.12-rc2, and found > > > > > > we > > > > > > also > > > > > > had > > > > > > to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 > > > > > > ("clk: > > > > > > imx: > > > > > > clk-imx8mp: Allow media_disp pixel clock reconfigure parent > > > > > > rate") > > > > > > alongside this. Reverting these two commits makes the > > > > > > display > > > > > > work > > > > > > again at -rc2. > > > > > > > > > > > > Do you have any suggestions on anything we might be missing > > > > > > on > > > > > > our > > > > > > end? > > > > > > Please let me know if there's anything you'd like me to > > > > > > test as > > > > > > I'm > > > > > > not > > > > > > sure what the underlying fault was here. > > > > > I believe what is going on is that the LCDIF cannot configure > > > > > its > > > > > upstream clock because something else is already using those > > > > > clock > > > > > and > > > > > it set those clock to a specific frequency. LCDIF is now > > > > > trying > > > > > to > > > > > configure those clock to match the LVDS panel, and it fails, > > > > > so > > > > > it > > > > > tries > > > > > to set some approximate clock and that is not good enough for > > > > > the > > > > > LVDS > > > > > panel. > > > > > > > > > > Can you share dump of /sys/kernel/debug/clk/clk_summary on > > > > > failing > > > > > and > > > > > working system ? You might see the difference around the > > > > > "video" > > > > > clock. > > > > > > > > > > (I have seen this behavior before, the fix was usually a > > > > > matter > > > > > of > > > > > moving one of the LCDIFs to another upstream clock like PLL3, > > > > > so > > > > > it > > > > > can > > > > > pick well matching output clock instead of some horrid > > > > > approximation > > > > > which then drives the panel likely out of specification) > > > > > > > > Hi Marek, > > > > > > > > Please find attached the clk_summary for v6.12-rc2 before and > > > > after > > > > the > > > > reversion (the one after the reversion is 6.12- > > > > rc2_summary_postfix). > > > Thank you, this helped greatly. > > > > > > I believe I know why it used to kind-of work for you, but I'm > > > afraid > > > this used to work by sheer chance and it does not really work > > > correctly > > > for the panel you use, even if the panel likely does show the > > > correct > > > content. But, there is a way to make it work properly for the > > > panel > > > you use. > > > > > > First of all, the pixel clock never really matched the panel- > > > simple.c > > > pixel clock for the edt_etml1010g3dra_timing: > > > > > > $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix > > > media_disp2_pix 1 1 0 74250000 ... > > > ^^^^^^^^ > > > > > > $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel- > > > simple.c > > > static const struct display_timing edt_etml1010g3dra_timing = { > > > .pixelclock = { 66300000, 72400000, 78900000 }, > > > ^^^^^^^^ > > > > > > The pixel clock are within tolerance, but there is a discrepancy > > > 74250000 != 72400000 . > > > > > > Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB > > > nodes") > > > the IMX8MP_VIDEO_PLL1_OUT is set to a very specific frequency of > > > 1039500000 Hz, which tidily divides by 2 to 519750000 Hz (which > > > is > > > your > > > LVDS serializer frequency) and divides by 7 to 74250000 Hz which > > > is > > > your > > > LCDIF pixel clock. > > > > > > This Video PLL1 configuration since moved to &media_blk_ctrl {} , > > > but > > > it > > > is still in the imx8mp.dtsi . Therefore, to make your panel work > > > at > > > the > > > correct desired pixel clock frequency instead of some random one > > > inherited from imx8mp.dtsi, add the following to the pollux DT, I > > > believe that will fix the problem and is the correct fix: > > > > > > &media_blk_ctrl { > > > // 506800000 = 72400000 * 7 (for single-link LVDS, this is > > > enough) > > > // there is no need to multiply the clock by * 2 > > > assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, > > > <500000000>, <506800000>; > > > }; > > > > > > Can you please test whether this works and the pixel clock are > > > accurate > > > in /sys/kernel/debug/clk/clk_summary ? > > > > Interestingly, after making the change you suggested to imx8mp- > > phyboard-pollux-rdk.dts before the two reversions, the display now > > seems to work. Please see below for the relevant section of the new > > clk_summary referring to media_disp2_pix: > > > > video_pll1_ref_sel 1 1 0 24000000 > > 0 0 50000 Y deviceless > > no_connection_id > > video_pll1 1 1 0 > > 506800000 0 0 50000 Y deviceless > > no_connection_ > > video_pll1_bypass 1 1 0 > > 506800000 0 0 50000 Y deviceless > > no_connecti > > video_pll1_out 2 2 0 > > 506800000 0 0 50000 Y deviceless > > no_conne > > media_ldb 1 1 0 > > 506800000 0 0 50000 Y > > deviceless > > no_co > > media_ldb_root_clk 1 1 0 > > 506800000 0 0 50000 Y > > 32ec0000.blk-ctrl:bridge@5c l > > > > > > deviceless no > > media_disp2_pix 1 1 0 > > 72400000 > > 0 0 50000 Y deviceless > > no_co > > media_disp2_pix_root_clk 1 1 0 > > 72400000 0 0 50000 Y > > 32e90000.display-controller > > > > > > 32ec0000.blk-ctrl di > > > > > > deviceless no > > media_disp1_pix 0 0 0 > > 506800000 0 0 50000 N > > deviceless > > no_co > > media_disp1_pix_root_clk 0 0 0 > > 506800000 0 0 50000 N > > 32ec0000.blk-ctrl > > > > > > deviceless no > > media_mipi_phy1_ref 0 0 0 > > 23036364 > > 0 0 50000 N deviceless > > no_co > > media_mipi_phy1_ref_root 0 0 0 > > 23036364 0 0 50000 N > > 32ec0000.blk-ctrl > > > > The media_disp2_pix clock now seems to be correct at 724000000 > > after > > your changes. > > Do you want to submit the DT patch with correct Fixes: tag ? :) I thought this wasn't needed with the other two patches?
On 10/9/24 5:58 PM, Isaac Scott wrote: [...] >>> media_mipi_phy1_ref 0 0 0 >>> 23036364 >>> 0 0 50000 N deviceless >>> no_co >>> media_mipi_phy1_ref_root 0 0 0 >>> 23036364 0 0 50000 N >>> 32ec0000.blk-ctrl >>> >>> The media_disp2_pix clock now seems to be correct at 724000000 >>> after >>> your changes. >> >> Do you want to submit the DT patch with correct Fixes: tag ? :) > > I thought this wasn't needed with the other two patches? The DT change is not needed with the other patches, however, I believe the DT change is the correct fix for current Linux 6.12-rc and the two patches are feature development for the Linux 6.13.y cycle.
On 10/09/2024, Marek Vasut wrote: > On 10/8/24 12:07 PM, Isaac Scott wrote: >> On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: >>> On 10/7/24 7:01 PM, Isaac Scott wrote: >>>> Hi Marek, >>> >>> Hi, >>> >>>> On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: >>>>> On 6/24/24 11:19 AM, Alexander Stein wrote: >>>>>> Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek Vasut: >>>>>>> In case an upstream bridge modified the required clock >>>>>>> frequency >>>>>>> in its .atomic_check callback by setting adjusted_mode.clock >>>>>>> , >>>>>>> make sure that clock frequency is generated by the LCDIFv3 >>>>>>> block. >>>>>>> >>>>>>> This is useful e.g. when LCDIFv3 feeds DSIM which feeds >>>>>>> TC358767 >>>>>>> with (e)DP output, where the TC358767 expects precise timing >>>>>>> on >>>>>>> its input side, the precise timing must be generated by the >>>>>>> LCDIF. >>>>>>> >>>>>>> Signed-off-by: Marek Vasut <marex@denx.de> >>>>>> >>>>>> With the other rc358767 patches in place, this does the trick. >>>>>> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> >>>>> >>>>> I'll pick this up next week if there is no objection. >>>> >>>> Unfortunately, this has caused a regression that is present in >>>> v6.12- >>>> rc1 on the i.MX8MP PHYTEC Pollux using the >>>> arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. The >>>> display is the edt,etml1010g3dra panel, as per the upstream dts. We >>>> bisected to this commit, and reverting this change fixed the >>>> screen. >>>> >>>> We then tried to retest this on top of v6.12-rc2, and found we also >>>> had >>>> to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 ("clk: >>>> imx: >>>> clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate") >>>> alongside this. Reverting these two commits makes the display work >>>> again at -rc2. >>>> >>>> Do you have any suggestions on anything we might be missing on our >>>> end? >>>> Please let me know if there's anything you'd like me to test as I'm >>>> not >>>> sure what the underlying fault was here. >>> I believe what is going on is that the LCDIF cannot configure its >>> upstream clock because something else is already using those clock >>> and >>> it set those clock to a specific frequency. LCDIF is now trying to >>> configure those clock to match the LVDS panel, and it fails, so it >>> tries >>> to set some approximate clock and that is not good enough for the >>> LVDS >>> panel. >>> >>> Can you share dump of /sys/kernel/debug/clk/clk_summary on failing >>> and >>> working system ? You might see the difference around the "video" >>> clock. >>> >>> (I have seen this behavior before, the fix was usually a matter of >>> moving one of the LCDIFs to another upstream clock like PLL3, so it >>> can >>> pick well matching output clock instead of some horrid approximation >>> which then drives the panel likely out of specification) >> >> Hi Marek, >> >> Please find attached the clk_summary for v6.12-rc2 before and after the >> reversion (the one after the reversion is 6.12-rc2_summary_postfix). > Thank you, this helped greatly. > > I believe I know why it used to kind-of work for you, but I'm afraid this used to work by sheer chance and it does not really work correctly for the panel you use, even if the panel likely does show the correct content. But, there is a way to make it work properly for the panel you use. > > First of all, the pixel clock never really matched the panel-simple.c pixel clock for the edt_etml1010g3dra_timing: > > $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix > media_disp2_pix 1 1 0 74250000 ... > ^^^^^^^^ > > $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel-simple.c > static const struct display_timing edt_etml1010g3dra_timing = { > .pixelclock = { 66300000, 72400000, 78900000 }, > ^^^^^^^^ > > The pixel clock are within tolerance, but there is a discrepancy 74250000 != 72400000 . > > Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes") the IMX8MP_VIDEO_PLL1_OUT is set to a very specific frequency of 1039500000 Hz, which tidily divides by 2 to 519750000 Hz (which is your LVDS serializer frequency) and divides by 7 to 74250000 Hz which is your LCDIF pixel clock. > > This Video PLL1 configuration since moved to &media_blk_ctrl {} , but it is still in the imx8mp.dtsi . Therefore, to make your panel work at the correct desired pixel clock frequency instead of some random one inherited from imx8mp.dtsi, add the following to the pollux DT, I believe that will fix the problem and is the correct fix: > > &media_blk_ctrl { > // 506800000 = 72400000 * 7 (for single-link LVDS, this is enough) > // there is no need to multiply the clock by * 2 > assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <500000000>, <506800000>; This assigns "video_pll1" clock rate to 506.8MHz which is currently not listed in imx_pll1443x_tbl[]. Does the below patch[1] fix the regression issue? It explicitly sets the clock frequency of the panel timing to 74.25MHz. [1] https://patchwork.freedesktop.org/patch/616905/?series=139266&rev=1 > }; > > Can you please test whether this works and the pixel clock are accurate in /sys/kernel/debug/clk/clk_summary ? > > Now ... as for the LVDS serializer clock ... that is more complicated. > > The LCDIF driver does its .atomic_enable first , configures the pixel clock (and the Video PLL now) and enables the clock. The LVDS LDB serializer driver does its .atomic_enable second and cannot reconfigure the clock anymore, the Video PLL is stuck at /7 rate set by LCDIF driver and won't budge because the clock are already enabled. I'm currently trying to figure out if this can be improved somehow, but I believe that would be material for next release. >
On Thu, 2024-10-10 at 13:31 +0800, Liu Ying wrote: > On 10/09/2024, Marek Vasut wrote: > > On 10/8/24 12:07 PM, Isaac Scott wrote: > > > On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: > > > > On 10/7/24 7:01 PM, Isaac Scott wrote: > > > > > Hi Marek, > > > > > > > > Hi, > > > > > > > > > On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: > > > > > > On 6/24/24 11:19 AM, Alexander Stein wrote: > > > > > > > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek > > > > > > > Vasut: > > > > > > > > In case an upstream bridge modified the required clock > > > > > > > > frequency > > > > > > > > in its .atomic_check callback by setting > > > > > > > > adjusted_mode.clock > > > > > > > > , > > > > > > > > make sure that clock frequency is generated by the > > > > > > > > LCDIFv3 > > > > > > > > block. > > > > > > > > > > > > > > > > This is useful e.g. when LCDIFv3 feeds DSIM which feeds > > > > > > > > TC358767 > > > > > > > > with (e)DP output, where the TC358767 expects precise > > > > > > > > timing > > > > > > > > on > > > > > > > > its input side, the precise timing must be generated by > > > > > > > > the > > > > > > > > LCDIF. > > > > > > > > > > > > > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > > > > > > > > > > > > With the other rc358767 patches in place, this does the > > > > > > > trick. > > > > > > > Reviewed-by: Alexander Stein > > > > > > > <alexander.stein@ew.tq-group.com> > > > > > > > > > > > > I'll pick this up next week if there is no objection. > > > > > > > > > > Unfortunately, this has caused a regression that is present > > > > > in > > > > > v6.12- > > > > > rc1 on the i.MX8MP PHYTEC Pollux using the > > > > > arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts. > > > > > The > > > > > display is the edt,etml1010g3dra panel, as per the upstream > > > > > dts. We > > > > > bisected to this commit, and reverting this change fixed the > > > > > screen. > > > > > > > > > > We then tried to retest this on top of v6.12-rc2, and found > > > > > we also > > > > > had > > > > > to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 > > > > > ("clk: > > > > > imx: > > > > > clk-imx8mp: Allow media_disp pixel clock reconfigure parent > > > > > rate") > > > > > alongside this. Reverting these two commits makes the display > > > > > work > > > > > again at -rc2. > > > > > > > > > > Do you have any suggestions on anything we might be missing > > > > > on our > > > > > end? > > > > > Please let me know if there's anything you'd like me to test > > > > > as I'm > > > > > not > > > > > sure what the underlying fault was here. > > > > I believe what is going on is that the LCDIF cannot configure > > > > its > > > > upstream clock because something else is already using those > > > > clock > > > > and > > > > it set those clock to a specific frequency. LCDIF is now trying > > > > to > > > > configure those clock to match the LVDS panel, and it fails, so > > > > it > > > > tries > > > > to set some approximate clock and that is not good enough for > > > > the > > > > LVDS > > > > panel. > > > > > > > > Can you share dump of /sys/kernel/debug/clk/clk_summary on > > > > failing > > > > and > > > > working system ? You might see the difference around the > > > > "video" > > > > clock. > > > > > > > > (I have seen this behavior before, the fix was usually a matter > > > > of > > > > moving one of the LCDIFs to another upstream clock like PLL3, > > > > so it > > > > can > > > > pick well matching output clock instead of some horrid > > > > approximation > > > > which then drives the panel likely out of specification) > > > > > > Hi Marek, > > > > > > Please find attached the clk_summary for v6.12-rc2 before and > > > after the > > > reversion (the one after the reversion is 6.12- > > > rc2_summary_postfix). > > Thank you, this helped greatly. > > > > I believe I know why it used to kind-of work for you, but I'm > > afraid this used to work by sheer chance and it does not really > > work correctly for the panel you use, even if the panel likely does > > show the correct content. But, there is a way to make it work > > properly for the panel you use. > > > > First of all, the pixel clock never really matched the panel- > > simple.c pixel clock for the edt_etml1010g3dra_timing: > > > > $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix > > media_disp2_pix 1 1 0 74250000 ... > > ^^^^^^^^ > > > > $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel- > > simple.c > > static const struct display_timing edt_etml1010g3dra_timing = { > > .pixelclock = { 66300000, 72400000, 78900000 }, > > ^^^^^^^^ > > > > The pixel clock are within tolerance, but there is a discrepancy > > 74250000 != 72400000 . > > > > Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB > > nodes") the IMX8MP_VIDEO_PLL1_OUT is set to a very specific > > frequency of 1039500000 Hz, which tidily divides by 2 to 519750000 > > Hz (which is your LVDS serializer frequency) and divides by 7 to > > 74250000 Hz which is your LCDIF pixel clock. > > > > This Video PLL1 configuration since moved to &media_blk_ctrl {} , > > but it is still in the imx8mp.dtsi . Therefore, to make your panel > > work at the correct desired pixel clock frequency instead of some > > random one inherited from imx8mp.dtsi, add the following to the > > pollux DT, I believe that will fix the problem and is the correct > > fix: > > > > &media_blk_ctrl { > > // 506800000 = 72400000 * 7 (for single-link LVDS, this is > > enough) > > // there is no need to multiply the clock by * 2 > > assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, > > <500000000>, <506800000>; > > This assigns "video_pll1" clock rate to 506.8MHz which is currently > not > listed in imx_pll1443x_tbl[]. > > Does the below patch[1] fix the regression issue? It explicitly sets > the clock frequency of the panel timing to 74.25MHz. > > [1] > https://patchwork.freedesktop.org/patch/616905/?series=139266&rev=1 > > > }; > > > > Can you please test whether this works and the pixel clock are > > accurate in /sys/kernel/debug/clk/clk_summary ? > > > > Now ... as for the LVDS serializer clock ... that is more > > complicated. > > > > The LCDIF driver does its .atomic_enable first , configures the > > pixel clock (and the Video PLL now) and enables the clock. The LVDS > > LDB serializer driver does its .atomic_enable second and cannot > > reconfigure the clock anymore, the Video PLL is stuck at /7 rate > > set by LCDIF driver and won't budge because the clock are already > > enabled. I'm currently trying to figure out if this can be improved > > somehow, but I believe that would be material for next release. > > > This patch also fixes the regression! Tested-by: Isaac Scott <isaac.scott@ideasonboard.com>
On Thu, 2024-10-10 at 16:54 +0100, Isaac Scott wrote: To be clear, my reply applies to the patch referenced by [1] Tested-by: Isaac Scott <isaac.scott@ideasonboard.com> > On Thu, 2024-10-10 at 13:31 +0800, Liu Ying wrote: > > On 10/09/2024, Marek Vasut wrote: > > > On 10/8/24 12:07 PM, Isaac Scott wrote: > > > > On Mon, 2024-10-07 at 20:06 +0200, Marek Vasut wrote: > > > > > On 10/7/24 7:01 PM, Isaac Scott wrote: > > > > > > Hi Marek, > > > > > > > > > > Hi, > > > > > > > > > > > On Sat, 2024-07-06 at 02:16 +0200, Marek Vasut wrote: > > > > > > > On 6/24/24 11:19 AM, Alexander Stein wrote: > > > > > > > > Am Freitag, 31. Mai 2024, 22:27:21 CEST schrieb Marek > > > > > > > > Vasut: > > > > > > > > > In case an upstream bridge modified the required > > > > > > > > > clock > > > > > > > > > frequency > > > > > > > > > in its .atomic_check callback by setting > > > > > > > > > adjusted_mode.clock > > > > > > > > > , > > > > > > > > > make sure that clock frequency is generated by the > > > > > > > > > LCDIFv3 > > > > > > > > > block. > > > > > > > > > > > > > > > > > > This is useful e.g. when LCDIFv3 feeds DSIM which > > > > > > > > > feeds > > > > > > > > > TC358767 > > > > > > > > > with (e)DP output, where the TC358767 expects precise > > > > > > > > > timing > > > > > > > > > on > > > > > > > > > its input side, the precise timing must be generated > > > > > > > > > by > > > > > > > > > the > > > > > > > > > LCDIF. > > > > > > > > > > > > > > > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > > > > > > > > > > > > > > With the other rc358767 patches in place, this does the > > > > > > > > trick. > > > > > > > > Reviewed-by: Alexander Stein > > > > > > > > <alexander.stein@ew.tq-group.com> > > > > > > > > > > > > > > I'll pick this up next week if there is no objection. > > > > > > > > > > > > Unfortunately, this has caused a regression that is present > > > > > > in > > > > > > v6.12- > > > > > > rc1 on the i.MX8MP PHYTEC Pollux using the > > > > > > arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux- > > > > > > rdk.dts. > > > > > > The > > > > > > display is the edt,etml1010g3dra panel, as per the upstream > > > > > > dts. We > > > > > > bisected to this commit, and reverting this change fixed > > > > > > the > > > > > > screen. > > > > > > > > > > > > We then tried to retest this on top of v6.12-rc2, and found > > > > > > we also > > > > > > had > > > > > > to revert commit ff06ea04e4cf3ba2f025024776e83bfbdfa05155 > > > > > > ("clk: > > > > > > imx: > > > > > > clk-imx8mp: Allow media_disp pixel clock reconfigure parent > > > > > > rate") > > > > > > alongside this. Reverting these two commits makes the > > > > > > display > > > > > > work > > > > > > again at -rc2. > > > > > > > > > > > > Do you have any suggestions on anything we might be missing > > > > > > on our > > > > > > end? > > > > > > Please let me know if there's anything you'd like me to > > > > > > test > > > > > > as I'm > > > > > > not > > > > > > sure what the underlying fault was here. > > > > > I believe what is going on is that the LCDIF cannot configure > > > > > its > > > > > upstream clock because something else is already using those > > > > > clock > > > > > and > > > > > it set those clock to a specific frequency. LCDIF is now > > > > > trying > > > > > to > > > > > configure those clock to match the LVDS panel, and it fails, > > > > > so > > > > > it > > > > > tries > > > > > to set some approximate clock and that is not good enough for > > > > > the > > > > > LVDS > > > > > panel. > > > > > > > > > > Can you share dump of /sys/kernel/debug/clk/clk_summary on > > > > > failing > > > > > and > > > > > working system ? You might see the difference around the > > > > > "video" > > > > > clock. > > > > > > > > > > (I have seen this behavior before, the fix was usually a > > > > > matter > > > > > of > > > > > moving one of the LCDIFs to another upstream clock like PLL3, > > > > > so it > > > > > can > > > > > pick well matching output clock instead of some horrid > > > > > approximation > > > > > which then drives the panel likely out of specification) > > > > > > > > Hi Marek, > > > > > > > > Please find attached the clk_summary for v6.12-rc2 before and > > > > after the > > > > reversion (the one after the reversion is 6.12- > > > > rc2_summary_postfix). > > > Thank you, this helped greatly. > > > > > > I believe I know why it used to kind-of work for you, but I'm > > > afraid this used to work by sheer chance and it does not really > > > work correctly for the panel you use, even if the panel likely > > > does > > > show the correct content. But, there is a way to make it work > > > properly for the panel you use. > > > > > > First of all, the pixel clock never really matched the panel- > > > simple.c pixel clock for the edt_etml1010g3dra_timing: > > > > > > $ grep '\<media_disp2_pix\>' 6.12-rc2_summary_postfix > > > media_disp2_pix 1 1 0 74250000 ... > > > ^^^^^^^^ > > > > > > $ grep -A 1 edt_etml1010g3dra_timing drivers/gpu/drm/panel/panel- > > > simple.c > > > static const struct display_timing edt_etml1010g3dra_timing = { > > > .pixelclock = { 66300000, 72400000, 78900000 }, > > > ^^^^^^^^ > > > > > > The pixel clock are within tolerance, but there is a discrepancy > > > 74250000 != 72400000 . > > > > > > Since commit 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB > > > nodes") the IMX8MP_VIDEO_PLL1_OUT is set to a very specific > > > frequency of 1039500000 Hz, which tidily divides by 2 to > > > 519750000 > > > Hz (which is your LVDS serializer frequency) and divides by 7 to > > > 74250000 Hz which is your LCDIF pixel clock. > > > > > > This Video PLL1 configuration since moved to &media_blk_ctrl {} , > > > but it is still in the imx8mp.dtsi . Therefore, to make your > > > panel > > > work at the correct desired pixel clock frequency instead of some > > > random one inherited from imx8mp.dtsi, add the following to the > > > pollux DT, I believe that will fix the problem and is the correct > > > fix: > > > > > > &media_blk_ctrl { > > > // 506800000 = 72400000 * 7 (for single-link LVDS, this is > > > enough) > > > // there is no need to multiply the clock by * 2 > > > assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, > > > <500000000>, <506800000>; > > > > This assigns "video_pll1" clock rate to 506.8MHz which is currently > > not > > listed in imx_pll1443x_tbl[]. > > > > Does the below patch[1] fix the regression issue? It explicitly > > sets > > the clock frequency of the panel timing to 74.25MHz. > > > > [1] > > https://patchwork.freedesktop.org/patch/616905/?series=139266&rev=1 > > > > > }; > > > > > > Can you please test whether this works and the pixel clock are > > > accurate in /sys/kernel/debug/clk/clk_summary ? > > > > > > Now ... as for the LVDS serializer clock ... that is more > > > complicated. > > > > > > The LCDIF driver does its .atomic_enable first , configures the > > > pixel clock (and the Video PLL now) and enables the clock. The > > > LVDS > > > LDB serializer driver does its .atomic_enable second and cannot > > > reconfigure the clock anymore, the Video PLL is stuck at /7 rate > > > set by LCDIF driver and won't budge because the clock are already > > > enabled. I'm currently trying to figure out if this can be > > > improved > > > somehow, but I believe that would be material for next release. > > > > > > > This patch also fixes the regression! > Tested-by: Isaac Scott <isaac.scott@ideasonboard.com>
On 10/10/24 7:31 AM, Liu Ying wrote: Hi, >> This Video PLL1 configuration since moved to &media_blk_ctrl {} , but it is still in the imx8mp.dtsi . Therefore, to make your panel work at the correct desired pixel clock frequency instead of some random one inherited from imx8mp.dtsi, add the following to the pollux DT, I believe that will fix the problem and is the correct fix: >> >> &media_blk_ctrl { >> // 506800000 = 72400000 * 7 (for single-link LVDS, this is enough) >> // there is no need to multiply the clock by * 2 >> assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <500000000>, <506800000>; > > This assigns "video_pll1" clock rate to 506.8MHz which is currently not > listed in imx_pll1443x_tbl[]. Since commit b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates") the 1443x PLLs can be configured to arbitrary rates which for video PLL is desirable as those should produce accurate clock. > Does the below patch[1] fix the regression issue? It explicitly sets > the clock frequency of the panel timing to 74.25MHz. > > [1] https://patchwork.freedesktop.org/patch/616905/?series=139266&rev=1 That patch is wrong, there is an existing entry for this panel in panel-simple.c which is correct and precise, please do not add that kind of imprecise duplicate timings into DT. [...]
On 10/11/2024, Marek Vasut wrote: > On 10/10/24 7:31 AM, Liu Ying wrote: > > Hi, Hi, > >>> This Video PLL1 configuration since moved to &media_blk_ctrl {} , but it is still in the imx8mp.dtsi . Therefore, to make your panel work at the correct desired pixel clock frequency instead of some random one inherited from imx8mp.dtsi, add the following to the pollux DT, I believe that will fix the problem and is the correct fix: >>> >>> &media_blk_ctrl { >>> // 506800000 = 72400000 * 7 (for single-link LVDS, this is enough) >>> // there is no need to multiply the clock by * 2 >>> assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <500000000>, <506800000>; >> >> This assigns "video_pll1" clock rate to 506.8MHz which is currently not >> listed in imx_pll1443x_tbl[]. > > Since commit b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates") the 1443x PLLs can be configured to arbitrary rates which for video PLL is desirable as those should produce accurate clock. Ack. > >> Does the below patch[1] fix the regression issue? It explicitly sets >> the clock frequency of the panel timing to 74.25MHz. >> >> [1] https://patchwork.freedesktop.org/patch/616905/?series=139266&rev=1 > That patch is wrong, there is an existing entry for this panel in panel-simple.c which is correct and precise, please do not add that kind of imprecise duplicate timings into DT. At least the patch[1] is legitimate now to override the display timing of the panel because the override mode is something panel-simple.c supports. And, pixel clock @74.25MHz is not out of the panel specification since edt_etml1010g3dra_timing indicates the minimum as 66.3MHz and the maximum as 78.9MHz. Furthermore, if "PHYTEC phyBOARD-Pollux i.MX8MP" also supports something like MIPI DSI to HDMI, then 74.25MHz panel pixel clock rate is more desirable because the LVDS display and the MIPI DSI display pipeline with typical 148.5MHz/74.25MHz pixel clock rates may use one single "video_pll1" clock. Anyway, I think it is ok to use the patch[1] or assigning "video_pll1" clock rate to 506.8MHz in DT(no things like MIPI DSI to HDMI in existing DT). > > [...]
On 10/11/24 5:10 AM, Liu Ying wrote: Hi, >>>> This Video PLL1 configuration since moved to &media_blk_ctrl {} , but it is still in the imx8mp.dtsi . Therefore, to make your panel work at the correct desired pixel clock frequency instead of some random one inherited from imx8mp.dtsi, add the following to the pollux DT, I believe that will fix the problem and is the correct fix: >>>> >>>> &media_blk_ctrl { >>>> // 506800000 = 72400000 * 7 (for single-link LVDS, this is enough) >>>> // there is no need to multiply the clock by * 2 >>>> assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <500000000>, <506800000>; >>> >>> This assigns "video_pll1" clock rate to 506.8MHz which is currently not >>> listed in imx_pll1443x_tbl[]. >> >> Since commit b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates") the 1443x PLLs can be configured to arbitrary rates which for video PLL is desirable as those should produce accurate clock. > > Ack. > >> >>> Does the below patch[1] fix the regression issue? It explicitly sets >>> the clock frequency of the panel timing to 74.25MHz. >>> >>> [1] https://patchwork.freedesktop.org/patch/616905/?series=139266&rev=1 >> That patch is wrong, there is an existing entry for this panel in panel-simple.c which is correct and precise, please do not add that kind of imprecise duplicate timings into DT. > > At least the patch[1] is legitimate now to override the display > timing of the panel because the override mode is something > panel-simple.c supports. It may be possible to override the mode, but why would this be the desired if the panel-simple.c already contains valid accurate timings for this particular panel ? > And, pixel clock @74.25MHz is not out > of the panel specification since edt_etml1010g3dra_timing > indicates the minimum as 66.3MHz and the maximum as 78.9MHz. The panel-simple.c already contains timings for this panel, which are accurate and follow the panel datasheet. If the goal here is to support approximate panel timings between the currently available three options (min/typ/max) listed in panel-simple, then that is another discussion for another patch. > Furthermore, if "PHYTEC phyBOARD-Pollux i.MX8MP" also supports > something like MIPI DSI to HDMI, then 74.25MHz panel pixel clock > rate is more desirable because the LVDS display and the MIPI DSI > display pipeline with typical 148.5MHz/74.25MHz pixel clock rates > may use one single "video_pll1" clock. I actually do have exactly this use case on one system -- one LVDS panel and one MIPI DSI panel -- the solution is really easy, source the LVDS pixel clock from Video PLL and the DSI clock from e.g. PLL3 . > Anyway, I think it is ok to use the patch[1] or assigning > "video_pll1" clock rate to 506.8MHz in DT(no things like MIPI > DSI to HDMI in existing DT). I believe for the current release, it is better to update the Video PLL clock in this one board DT, because that is minimum impact change isolated to this board and fixes a real issue where the LVDS panel worked within specification only by sheer chance.
diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c index 2541d2de4e45f..dbd42cc1da87f 100644 --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c @@ -407,8 +407,7 @@ static void lcdif_crtc_mode_set_nofb(struct drm_crtc_state *crtc_state, struct drm_display_mode *m = &crtc_state->adjusted_mode; DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n", - m->crtc_clock, - (int)(clk_get_rate(lcdif->clk) / 1000)); + m->clock, (int)(clk_get_rate(lcdif->clk) / 1000)); DRM_DEV_DEBUG_DRIVER(drm->dev, "Bridge bus_flags: 0x%08X\n", lcdif_crtc_state->bus_flags); DRM_DEV_DEBUG_DRIVER(drm->dev, "Mode flags: 0x%08X\n", m->flags); @@ -538,7 +537,7 @@ static void lcdif_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_device *drm = lcdif->drm; dma_addr_t paddr; - clk_set_rate(lcdif->clk, m->crtc_clock * 1000); + clk_set_rate(lcdif->clk, m->clock * 1000); pm_runtime_get_sync(drm->dev);
In case an upstream bridge modified the required clock frequency in its .atomic_check callback by setting adjusted_mode.clock , make sure that clock frequency is generated by the LCDIFv3 block. This is useful e.g. when LCDIFv3 feeds DSIM which feeds TC358767 with (e)DP output, where the TC358767 expects precise timing on its input side, the precise timing must be generated by the LCDIF. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Lukas F. Hartmann <lukas@mntmn.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Cc: imx@lists.linux.dev Cc: kernel@dh-electronics.com Cc: linux-arm-kernel@lists.infradead.org --- drivers/gpu/drm/mxsfb/lcdif_kms.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)