Message ID | 20241010-zii_yaml-v2-4-0ab730607422@nxp.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format | expand |
On Thu, 10 Oct 2024 11:42:41 -0400, Frank Li wrote: > Convert device binding doc zii,rave-sp-wdt.txt to yaml format. > Additional changes: > - Ref to watchdog.yaml. > - Remove mfd node in example. > - Remove eeprom part in example. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > .../bindings/watchdog/zii,rave-sp-wdt.txt | 39 ------------------ > .../bindings/watchdog/zii,rave-sp-wdt.yaml | 47 ++++++++++++++++++++++ > 2 files changed, 47 insertions(+), 39 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): Warning: Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241010-zii_yaml-v2-4-0ab730607422@nxp.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Thu, 10 Oct 2024 11:42:41 -0400, Frank Li wrote: > Convert device binding doc zii,rave-sp-wdt.txt to yaml format. > Additional changes: > - Ref to watchdog.yaml. > - Remove mfd node in example. > - Remove eeprom part in example. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > .../bindings/watchdog/zii,rave-sp-wdt.txt | 39 ------------------ > .../bindings/watchdog/zii,rave-sp-wdt.yaml | 47 ++++++++++++++++++++++ > 2 files changed, 47 insertions(+), 39 deletions(-) > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt deleted file mode 100644 index 3de96186e92e6..0000000000000 --- a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt +++ /dev/null @@ -1,39 +0,0 @@ -Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings - -RAVE SP watchdog device is a "MFD cell" device corresponding to -watchdog functionality of RAVE Supervisory Processor. It is expected -that its Device Tree node is specified as a child of the node -corresponding to the parent RAVE SP device (as documented in -Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) - -Required properties: - -- compatible: Depending on wire protocol implemented by RAVE SP - firmware, should be one of: - - "zii,rave-sp-watchdog" - - "zii,rave-sp-watchdog-legacy" - -Optional properties: - -- wdt-timeout: Two byte nvmem cell specified as per - Documentation/devicetree/bindings/nvmem/nvmem.txt - -Example: - - rave-sp { - compatible = "zii,rave-sp-rdu1"; - current-speed = <38400>; - - eeprom { - wdt_timeout: wdt-timeout@8E { - reg = <0x8E 2>; - }; - }; - - watchdog { - compatible = "zii,rave-sp-watchdog"; - nvmem-cells = <&wdt_timeout>; - nvmem-cell-names = "wdt-timeout"; - }; - } - diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml new file mode 100644 index 0000000000000..de0d56725dd40 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-sp-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + RAVE SP watchdog device is a "MFD cell" device corresponding to + watchdog functionality of RAVE Supervisory Processor. It is expected + that its Device Tree node is specified as a child of the node + corresponding to the parent RAVE SP device (as documented in + Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml) + +properties: + compatible: + enum: + - zii,rave-sp-watchdog + - zii,rave-sp-watchdog-legacy + + nvmem-cell-names: + items: + - const: wdt_timeout + + nvmem-cells: + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: watchdog.yaml# + +unevaluatedProperties: false + +examples: + - | + watchdog { + compatible = "zii,rave-sp-watchdog"; + nvmem-cells = <&wdt_timeout>; + nvmem-cell-names = "wdt_timeout"; + }; +
Convert device binding doc zii,rave-sp-wdt.txt to yaml format. Additional changes: - Ref to watchdog.yaml. - Remove mfd node in example. - Remove eeprom part in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../bindings/watchdog/zii,rave-sp-wdt.txt | 39 ------------------ .../bindings/watchdog/zii,rave-sp-wdt.yaml | 47 ++++++++++++++++++++++ 2 files changed, 47 insertions(+), 39 deletions(-)