| Message ID | 20241009111551.27052-2-Shu-hsiang.Yang@mediatek.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add MediaTek ISP7 camera system driver | expand |
On Wed, Oct 09, 2024 at 07:15:42PM +0800, Shu-hsiang Yang wrote: > 1. Add camera isp7x module device document > 2. Add camera interface device document > > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@mediatek.com> > --- > .../media/mediatek/mediatek,cam-raw.yaml | 169 ++++++++++++++++++ > .../media/mediatek/mediatek,cam-yuv.yaml | 148 +++++++++++++++ > .../media/mediatek/mediatek,camisp.yaml | 71 ++++++++ > .../media/mediatek/mediatek,seninf-core.yaml | 106 +++++++++++ > .../media/mediatek/mediatek,seninf.yaml | 88 +++++++++ > 5 files changed, 582 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml > > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > new file mode 100644 > index 000000000000..c709e4bf0a18 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > @@ -0,0 +1,169 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: The cam-raw unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek cam-raw is the camera RAW processing unit in MediaTek SoC. > + > +properties: > + compatible: > + const: mediatek,cam-raw Compatibles should be SoC specific. > + > + "#address-cells": > + const: 2 > + > + "#size-cells": > + const: 2 Don't need these. You don't have any child nodes with addresses. > + > + reg: > + items: > + minItems: 2 > + maxItems: 4 Drop items. > + minItems: 1 > + maxItems: 2 You have to specify what each region is. Why does it vary? A h/w block either has register region or it doesn't. > + > + reg-names: > + minItems: 1 > + maxItems: 2 You must define the names. > + > + mediatek,cam-id: > + description: > + Describes the index of MediaTek cam-raw unit for ISP > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2] No, we don't put module indices in DT. > + > + mediatek,larbs: > + description: > + Describes MediaTek bus infrastructure unit for ISP system. > + List of phandle to the local arbiters in the current SoCs. > + Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. > + $ref: /schemas/types.yaml#/definitions/phandle-array > + minItems: 1 > + maxItems: 32 > + > + interrupts: > + minItems: 1 > + > + dma-ranges: > + description: > + Describes the address information of IOMMU mapping to memory. > + Defines six fields for the MediaTek IOMMU extended iova, pa, and size. > + minItems: 1 > + > + power-domains: > + minItems: 1 > + > + clocks: > + minItems: 4 > + maxItems: 16 You have to define what the clocks are. > + > + clock-names: > + minItems: 4 > + maxItems: 16 > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 Drop. You don't need to document assigned-clocks. > + > + iommus: > + description: > + Points to the respective IOMMU block with master port as argument, see > + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. > + Ports are according to the HW. > + minItems: 1 > + maxItems: 32 > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - power-domains > + - clocks > + - clock-names > + - iommus > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/power/mediatek,mt8188-power.h> > + #include <dt-bindings/clock/mediatek,mt8188-clk.h> > + #include <dt-bindings/memory/mediatek,mt8188-memory-port.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + cam_raw_a@16030000 { > + compatible = "mediatek,cam-raw"; > + reg = <0 0x16030000 0 0x8000>, > + <0 0x16038000 0 0x8000>; > + reg-names = "base", "inner_base"; > + mediatek,cam-id = <0>; > + mediatek,larbs = <&larb16a>; > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>; > + #address-cells = <2>; > + #size-cells = <2>; > + dma-ranges = <0x2 0x0 0x0 0x40000000 0x1 0x0>; > + power-domains = <&spm MT8188_POWER_DOMAIN_CAM_SUBA>; > + clocks = <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>, > + <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>, > + <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>, > + <&camsys CLK_CAM_MAIN_CAM>, > + <&camsys CLK_CAM_MAIN_CAMTG>, > + <&camsys_rawa CLK_CAM_RAWA_LARBX>, > + <&camsys_rawa CLK_CAM_RAWA_CAM>, > + <&camsys_rawa CLK_CAM_RAWA_CAMTG>, > + <&topckgen CLK_TOP_CAM>, > + <&topckgen CLK_TOP_CAMTG>, > + <&topckgen CLK_TOP_CAMTM>; > + clock-names = "camsys_cam2mm0_cgpdn", > + "camsys_cam2mm1_cgpdn", > + "camsys_cam2sys_cgpdn", > + "camsys_cam_cgpdn", > + "camsys_camtg_cgpdn", > + "camsys_rawa_larbx_cgpdn", > + "camsys_rawa_cam_cgpdn", > + "camsys_rawa_camtg_cgpdn", > + "topckgen_top_cam", > + "topckgen_top_camtg", > + "topckgen_top_camtm"; > + assigned-clocks = <&topckgen CLK_TOP_CAM>; > + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5>; > + iommus = <&vpp_iommu M4U_PORT_L16A_IMGO_R1>, > + <&vpp_iommu M4U_PORT_L16A_CQI_R1>, > + <&vpp_iommu M4U_PORT_L16A_CQI_R2>, > + <&vpp_iommu M4U_PORT_L16A_BPCI_R1>, > + <&vpp_iommu M4U_PORT_L16A_LSCI_R1>, > + <&vpp_iommu M4U_PORT_L16A_RAWI_R2>, > + <&vpp_iommu M4U_PORT_L16A_RAWI_R3>, > + <&vpp_iommu M4U_PORT_L16A_UFDI_R2>, > + <&vpp_iommu M4U_PORT_L16A_UFDI_R3>, > + <&vpp_iommu M4U_PORT_L16A_RAWI_R4>, > + <&vpp_iommu M4U_PORT_L16A_RAWI_R5>, > + <&vpp_iommu M4U_PORT_L16A_AAI_R1>, > + <&vpp_iommu M4U_PORT_L16A_UFDI_R5>, > + <&vpp_iommu M4U_PORT_L16A_FHO_R1>, > + <&vpp_iommu M4U_PORT_L16A_AAO_R1>, > + <&vpp_iommu M4U_PORT_L16A_TSFSO_R1>, > + <&vpp_iommu M4U_PORT_L16A_FLKO_R1>; > + }; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml > new file mode 100644 > index 000000000000..30dfd5e5ecb1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml Similar comments on the rest. Rob
Hi, Shu-shiang: On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote: > 1. Add camera isp7x module device document > 2. Add camera interface device document > > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@mediatek.com> > --- > .../media/mediatek/mediatek,cam-raw.yaml | 169 ++++++++++++++++++ > .../media/mediatek/mediatek,cam-yuv.yaml | 148 +++++++++++++++ > .../media/mediatek/mediatek,camisp.yaml | 71 ++++++++ > .../media/mediatek/mediatek,seninf-core.yaml | 106 +++++++++++ > .../media/mediatek/mediatek,seninf.yaml | 88 +++++++++ Break each binding document to an independent patch and this would make review process easier. For example, there are five patches for each of cam-raw, cam-yuv, camisp, seninf-core, seninf. When I feel good about cam-raw, cam-yuv, camisp, I would give reviewed-by tag on these three patches. After you send new version, I could focus on reviewing seninf-core and seninf. If these are combined into one patch, even I feel good about cam-raw, cam-yuv, camisp, I can not give reviewed-by tag on this patch. After you send new version, I need to review the whole patch again. This would slow down the review process. > 5 files changed, 582 insertions(+) > [snip] > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > @@ -0,0 +1,169 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPnhKvzWQ$ > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPfKVBdTw$ > + > +title: The cam-raw unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek cam-raw is the camera RAW processing unit in MediaTek SoC. > + > +properties: > + compatible: > + const: mediatek,cam-raw mediatek,mt8188-cam-raw > + > + "#address-cells": > + const: 2 > + > [snip] > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml > new file mode 100644 > index 000000000000..30dfd5e5ecb1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml > @@ -0,0 +1,148 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/media/mediatek/mediatek,cam-yuv.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPyS5asjc$ > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPfKVBdTw$ > + > +title: The cam-yuv unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek cam-yuv is the camera YUV processing unit in MediaTek SoC. > + > +properties: > + compatible: > + const: mediatek,cam-yuv mediatek,mt8188-cam-yuv > + > + "#address-cells": > + const: 2 > + > [snip] > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml > new file mode 100644 > index 000000000000..ce378ddbd5bd > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml > @@ -0,0 +1,71 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/media/mediatek/mediatek,camisp.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPg8zy568$ > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPfKVBdTw$ > + > +title: The camisp unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek camisp is the ISP auxiliary unit for camera system in MediaTek SoC. > + > +properties: > + compatible: > + const: mediatek,camisp mediatek,mt8188-camisp > + > + "#address-cells": > + const: 2 > + > [snip] > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml > new file mode 100644 > index 000000000000..bc509976a79e > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/media/mediatek/mediatek,seninf-core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPyn0dkZA$ > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPfKVBdTw$ > + > +title: The seninf-core top unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek seninf-core is the ISP sensor interface unit in MediaTek SoC. > + The sensor interface serves as the MIPI-CSI2 top RX controller. > + > +properties: > + compatible: > + const: mediatek,seninf-core mediatek,mt8188-seninf-core > + > + "#address-cells": > + const: 2 > + > [snip] > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml > new file mode 100644 > index 000000000000..37d94138c558 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/media/mediatek/mediatek,seninf.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPVkLta9M$ > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPfKVBdTw$ > + > +title: The seninf unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek seninf is the MIPI-CSI2 port for seninf-core in MediaTek SoC. > + These ports provide the optional capability to define endpoints and set RX > + controller for camera sensors. > + > +properties: > + compatible: > + const: mediatek,seninf mediatek,mt8188-seninf Regards, CK > + > + csi-port: > + description: MediaTek CSI Rx port name > + $ref: /schemas/types.yaml#/definitions/string > + >
Hi, Shu-hsiang: On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote: > 1. Add camera isp7x module device document > 2. Add camera interface device document > > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@mediatek.com> > --- [snip] > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml > new file mode 100644 > index 000000000000..37d94138c558 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + > +%YAML 1.2 > +--- > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/media/mediatek/mediatek,seninf.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPVkLta9M$ > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!jkHmqtxOst6Dv88RaE-ss9VaxKxFo4FuPl1smXTEnkiijU7jS9nkYGBPoLr8g4Ji2dZpb_7LHWrLpIyu2qoPfKVBdTw$ > + > +title: The seninf unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> > + - Shun-yi Wang <shun-yi.wang@mediatek.com> > + - Teddy Chen <teddy.chen@mediatek.com> > + > +description: > + MediaTek seninf is the MIPI-CSI2 port for seninf-core in MediaTek SoC. > + These ports provide the optional capability to define endpoints and set RX > + controller for camera sensors. > + > +properties: > + compatible: > + const: mediatek,seninf > + > + csi-port: > + description: MediaTek CSI Rx port name > + $ref: /schemas/types.yaml#/definitions/string > + > + port: > + description: > + MediaTek sensor interface endpoints for one sensor bus. > + $ref: /schemas/graph.yaml#/$defs/port-base > + > + properties: > + "#address-cells": > + const: 1 > + "#size-cells": > + const: 0 > + > + patternProperties: > + "^endpoint(@[0-9]+)?$": > + description: > + CSI port for one sensor endpoint configuration. > + Consider one sensor bus can support differet links for MIPI PHY. > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + properties: > + data-lanes: > + items: > + enum: [1, 2, 3, 4] > + maxItems: 4 > + > + additionalProperties: false > + > +required: > + - compatible > + - csi-port > + - port > + > +additionalProperties: false > + > +examples: > + - | > + seninf_top { > + seninf_csi_port_0: seninf_csi_port_0 { > + compatible = "mediatek,seninf"; > + csi-port = "0A"; This device has no reg property, so it's a virtual device not a real device. binding document is used to describe a real hardware device, so drop this binding document. There is another seninf device [1] which is upstreaming. Even though it's not upstreamed yet, it have been reviewed. You may take it as a reference. [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=874617 Regards, CK > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + seninf_csi_port_0_in_1: endpoint { > + data-lanes = <1 2>; > + link-frequencies = /bits/ 64 <1440000000 624000000>; > + remote-endpoint = <&sensor0_out_1>; > + }; > + > + seninf_csi_port_0_in_2: endpoint@2 { > + reg = <2>; > + data-lanes = <1 2>; > + link-frequencies = /bits/ 64 <336000000 207000000>; > + remote-endpoint = <&sensor0_out_2>; > + }; > + }; > + }; > + }; > + > +...
diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml new file mode 100644 index 000000000000..c709e4bf0a18 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 MediaTek Inc. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The cam-raw unit of MediaTek ISP system + +maintainers: + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> + - Shun-yi Wang <shun-yi.wang@mediatek.com> + - Teddy Chen <teddy.chen@mediatek.com> + +description: + MediaTek cam-raw is the camera RAW processing unit in MediaTek SoC. + +properties: + compatible: + const: mediatek,cam-raw + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 + + mediatek,cam-id: + description: + Describes the index of MediaTek cam-raw unit for ISP + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + mediatek,larbs: + description: + Describes MediaTek bus infrastructure unit for ISP system. + List of phandle to the local arbiters in the current SoCs. + Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 32 + + interrupts: + minItems: 1 + + dma-ranges: + description: + Describes the address information of IOMMU mapping to memory. + Defines six fields for the MediaTek IOMMU extended iova, pa, and size. + minItems: 1 + + power-domains: + minItems: 1 + + clocks: + minItems: 4 + maxItems: 16 + + clock-names: + minItems: 4 + maxItems: 16 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + iommus: + description: + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + minItems: 1 + maxItems: 32 + +required: + - compatible + - reg + - reg-names + - interrupts + - power-domains + - clocks + - clock-names + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/memory/mediatek,mt8188-memory-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + cam_raw_a@16030000 { + compatible = "mediatek,cam-raw"; + reg = <0 0x16030000 0 0x8000>, + <0 0x16038000 0 0x8000>; + reg-names = "base", "inner_base"; + mediatek,cam-id = <0>; + mediatek,larbs = <&larb16a>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x2 0x0 0x0 0x40000000 0x1 0x0>; + power-domains = <&spm MT8188_POWER_DOMAIN_CAM_SUBA>; + clocks = <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>, + <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>, + <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>, + <&camsys CLK_CAM_MAIN_CAM>, + <&camsys CLK_CAM_MAIN_CAMTG>, + <&camsys_rawa CLK_CAM_RAWA_LARBX>, + <&camsys_rawa CLK_CAM_RAWA_CAM>, + <&camsys_rawa CLK_CAM_RAWA_CAMTG>, + <&topckgen CLK_TOP_CAM>, + <&topckgen CLK_TOP_CAMTG>, + <&topckgen CLK_TOP_CAMTM>; + clock-names = "camsys_cam2mm0_cgpdn", + "camsys_cam2mm1_cgpdn", + "camsys_cam2sys_cgpdn", + "camsys_cam_cgpdn", + "camsys_camtg_cgpdn", + "camsys_rawa_larbx_cgpdn", + "camsys_rawa_cam_cgpdn", + "camsys_rawa_camtg_cgpdn", + "topckgen_top_cam", + "topckgen_top_camtg", + "topckgen_top_camtm"; + assigned-clocks = <&topckgen CLK_TOP_CAM>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5>; + iommus = <&vpp_iommu M4U_PORT_L16A_IMGO_R1>, + <&vpp_iommu M4U_PORT_L16A_CQI_R1>, + <&vpp_iommu M4U_PORT_L16A_CQI_R2>, + <&vpp_iommu M4U_PORT_L16A_BPCI_R1>, + <&vpp_iommu M4U_PORT_L16A_LSCI_R1>, + <&vpp_iommu M4U_PORT_L16A_RAWI_R2>, + <&vpp_iommu M4U_PORT_L16A_RAWI_R3>, + <&vpp_iommu M4U_PORT_L16A_UFDI_R2>, + <&vpp_iommu M4U_PORT_L16A_UFDI_R3>, + <&vpp_iommu M4U_PORT_L16A_RAWI_R4>, + <&vpp_iommu M4U_PORT_L16A_RAWI_R5>, + <&vpp_iommu M4U_PORT_L16A_AAI_R1>, + <&vpp_iommu M4U_PORT_L16A_UFDI_R5>, + <&vpp_iommu M4U_PORT_L16A_FHO_R1>, + <&vpp_iommu M4U_PORT_L16A_AAO_R1>, + <&vpp_iommu M4U_PORT_L16A_TSFSO_R1>, + <&vpp_iommu M4U_PORT_L16A_FLKO_R1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml new file mode 100644 index 000000000000..30dfd5e5ecb1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 MediaTek Inc. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-yuv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The cam-yuv unit of MediaTek ISP system + +maintainers: + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> + - Shun-yi Wang <shun-yi.wang@mediatek.com> + - Teddy Chen <teddy.chen@mediatek.com> + +description: + MediaTek cam-yuv is the camera YUV processing unit in MediaTek SoC. + +properties: + compatible: + const: mediatek,cam-yuv + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 + + mediatek,cam-id: + description: + Describes the index of MediaTek cam-yuv unit for ISP + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + mediatek,larbs: + description: + Describes MediaTek bus infrastructure unit for ISP system. + List of phandle to the local arbiters in the current SoCs. + Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 32 + + interrupts: + minItems: 1 + + dma-ranges: + description: + Describes the address information of IOMMU mapping to memory. + Defines six fields for the MediaTek IOMMU extended iova, pa, and size. + minItems: 1 + + power-domains: + minItems: 1 + + clocks: + minItems: 4 + maxItems: 16 + + clock-names: + minItems: 4 + maxItems: 16 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + iommus: + description: + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + minItems: 1 + maxItems: 32 + +required: + - compatible + - reg + - reg-names + - interrupts + - power-domains + - clocks + - clock-names + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/memory/mediatek,mt8188-memory-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + cam_yuv_b@16090000 { + compatible = "mediatek,cam-yuv"; + reg = <0 0x16090000 0 0x8000>; + reg-names = "base"; + mediatek,cam-id = <1>; + mediatek,larbs = <&larb17b>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x2 0x0 0x0 0x40000000 0x1 0x0>; + power-domains = <&spm MT8188_POWER_DOMAIN_CAM_SUBB>; + clocks = <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>, + <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>, + <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>, + <&camsys_yuvb CLK_CAM_YUVB_LARBX>, + <&camsys_yuvb CLK_CAM_YUVB_CAM>, + <&camsys_yuvb CLK_CAM_YUVB_CAMTG>; + clock-names = "camsys_cam2mm0_cgpdn", + "camsys_cam2mm1_cgpdn", + "camsys_cam2sys_cgpdn", + "camsys_yuvb_larbx_cgpdn", + "camsys_yuvb_cam_cgpdn", + "camsys_yuvb_camtg_cgpdn"; + assigned-clocks = <&topckgen CLK_TOP_CAM>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5>; + iommus = <&vdo_iommu M4U_PORT_L17B_YUVO_R1>, + <&vdo_iommu M4U_PORT_L17B_YUVO_R3>, + <&vdo_iommu M4U_PORT_L17B_YUVCO_R1>, + <&vdo_iommu M4U_PORT_L17B_YUVO_R2>, + <&vdo_iommu M4U_PORT_L17B_RZH1N2TO_R1>, + <&vdo_iommu M4U_PORT_L17B_DRZS4NO_R1>, + <&vdo_iommu M4U_PORT_L17B_TNCSO_R1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml new file mode 100644 index 000000000000..ce378ddbd5bd --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 MediaTek Inc. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek/mediatek,camisp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The camisp unit of MediaTek ISP system + +maintainers: + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> + - Shun-yi Wang <shun-yi.wang@mediatek.com> + - Teddy Chen <teddy.chen@mediatek.com> + +description: + MediaTek camisp is the ISP auxiliary unit for camera system in MediaTek SoC. + +properties: + compatible: + const: mediatek,camisp + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 2 + + reg-names: + maxItems: 1 + + power-domains: + maxItems: 1 + + mediatek,scp: + description: MediaTek co-process unit for ISP system + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - reg-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/power/mediatek,mt8188-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camisp: camisp@16000000 { + compatible = "mediatek,camisp"; + reg = <0 0x16000000 0 0x1000>; + reg-names = "base"; + mediatek,scp = <&scp_dual>; + power-domains = <&spm MT8188_POWER_DOMAIN_CAM_MAIN>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml new file mode 100644 index 000000000000..bc509976a79e --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 MediaTek Inc. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek/mediatek,seninf-core.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The seninf-core top unit of MediaTek ISP system + +maintainers: + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> + - Shun-yi Wang <shun-yi.wang@mediatek.com> + - Teddy Chen <teddy.chen@mediatek.com> + +description: + MediaTek seninf-core is the ISP sensor interface unit in MediaTek SoC. + The sensor interface serves as the MIPI-CSI2 top RX controller. + +properties: + compatible: + const: mediatek,seninf-core + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 2 + maxItems: 2 + + mtk_csi_phy_ver: + description: + Describes MediaTek camera Rx controller version + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + power-domains: + minItems: 1 + maxItems: 4 + + clocks: + minItems: 3 + maxItems: 8 + + clock-names: + minItems: 3 + maxItems: 8 + +required: + - compatible + - reg + - reg-names + - interrupts + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + seninf_top: seninf_top@16010000 { + compatible = "mediatek,seninf-core"; + reg = <0 0x16010000 0 0x8000>, + <0 0x11ed0000 0 0xc000>; + reg-names = "base", "ana-rx"; + mtk_csi_phy_ver = "mtk_csi_phy_2_0"; + interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8188_POWER_DOMAIN_CSIRX_TOP>, + <&spm MT8188_POWER_DOMAIN_CAM_VCORE>, + <&spm MT8188_POWER_DOMAIN_CAM_MAIN>; + clocks = <&camsys CLK_CAM_MAIN_SENINF>, + <&topckgen CLK_TOP_SENINF>, + <&topckgen CLK_TOP_SENINF1>, + <&topckgen CLK_TOP_CAMTM>; + clock-names = "clk_cam_seninf", + "clk_top_seninf", + "clk_top_seninf1", + "clk_top_camtm"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml new file mode 100644 index 000000000000..37d94138c558 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 MediaTek Inc. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek/mediatek,seninf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The seninf unit of MediaTek ISP system + +maintainers: + - Shu-hsiang Yang <shu-hsiang.yang@mediatek.com> + - Shun-yi Wang <shun-yi.wang@mediatek.com> + - Teddy Chen <teddy.chen@mediatek.com> + +description: + MediaTek seninf is the MIPI-CSI2 port for seninf-core in MediaTek SoC. + These ports provide the optional capability to define endpoints and set RX + controller for camera sensors. + +properties: + compatible: + const: mediatek,seninf + + csi-port: + description: MediaTek CSI Rx port name + $ref: /schemas/types.yaml#/definitions/string + + port: + description: + MediaTek sensor interface endpoints for one sensor bus. + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^endpoint(@[0-9]+)?$": + description: + CSI port for one sensor endpoint configuration. + Consider one sensor bus can support differet links for MIPI PHY. + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + items: + enum: [1, 2, 3, 4] + maxItems: 4 + + additionalProperties: false + +required: + - compatible + - csi-port + - port + +additionalProperties: false + +examples: + - | + seninf_top { + seninf_csi_port_0: seninf_csi_port_0 { + compatible = "mediatek,seninf"; + csi-port = "0A"; + port { + #address-cells = <1>; + #size-cells = <0>; + + seninf_csi_port_0_in_1: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <1440000000 624000000>; + remote-endpoint = <&sensor0_out_1>; + }; + + seninf_csi_port_0_in_2: endpoint@2 { + reg = <2>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <336000000 207000000>; + remote-endpoint = <&sensor0_out_2>; + }; + }; + }; + }; + +...
1. Add camera isp7x module device document 2. Add camera interface device document Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@mediatek.com> --- .../media/mediatek/mediatek,cam-raw.yaml | 169 ++++++++++++++++++ .../media/mediatek/mediatek,cam-yuv.yaml | 148 +++++++++++++++ .../media/mediatek/mediatek,camisp.yaml | 71 ++++++++ .../media/mediatek/mediatek,seninf-core.yaml | 106 +++++++++++ .../media/mediatek/mediatek,seninf.yaml | 88 +++++++++ 5 files changed, 582 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml