| Message ID | 20241010072243.10227-2-lujianhua000@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add qca6390-pmu node | expand |
On Thu, Oct 10, 2024 at 03:22:42PM GMT, Jianhua Lu wrote: > Add wifi node and this wifi module is connected to PCIe port. > The following is qca6390 probe message: > ath11k_pci 0000:01:00.0: Adding to iommu group 12 > ath11k_pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x604fffff 64bit]: assigned > ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002) > ath11k_pci 0000:01:00.0: MSI vectors: 32 > ath11k_pci 0000:01:00.0: qca6390 hw2.0 > ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff > ath11k_pci 0000:01:00.0: fw_version 0x10121492 fw_build_timestamp 2021-11-04 11:23 fw_build_id > > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> > --- > changes in v3: > 1. fix commit message typo (pice -> PCIe). > > changes in v2: > 1. add qcom,ath11k-calibration-variant property. > > .../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi > index ebea283f56ea..7a55e271c3ac 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi > @@ -680,6 +680,25 @@ &pcie0_phy { > status = "okay"; > }; > > +&pcieport0 { > + wifi@0 { > + compatible = "pci17cb,1101"; > + reg = <0x10000 0x0 0x0 0x0 0x0>; > + > + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; > + vddaon-supply = <&vreg_pmu_aon_0p59>; > + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; > + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; > + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; > + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; > + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; > + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; > + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; > + > + qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro"; Let's wait for Kalle's response. Nevertheless, Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > + }; > +}; > + > &pm8150_gpios { > vol_up_n: vol-up-n-state { > pins = "gpio6"; > -- > 2.46.1 >
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes: >> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi >> @@ -680,6 +680,25 @@ &pcie0_phy { >> status = "okay"; >> }; >> >> +&pcieport0 { >> + wifi@0 { >> + compatible = "pci17cb,1101"; >> + reg = <0x10000 0x0 0x0 0x0 0x0>; >> + >> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; >> + vddaon-supply = <&vreg_pmu_aon_0p59>; >> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; >> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; >> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; >> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; >> + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; >> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; >> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; >> + >> + qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro"; > > Let's wait for Kalle's response. Sorry, I don't know what you refer to here. I have been extremly busy with MLO patches so drowning with mail right now :/
On Fri, Oct 11, 2024 at 02:08:19PM +0300, Kalle Valo wrote: > Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes: > > >> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi > >> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi > >> @@ -680,6 +680,25 @@ &pcie0_phy { > >> status = "okay"; > >> }; > >> > >> +&pcieport0 { > >> + wifi@0 { > >> + compatible = "pci17cb,1101"; > >> + reg = <0x10000 0x0 0x0 0x0 0x0>; > >> + > >> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; > >> + vddaon-supply = <&vreg_pmu_aon_0p59>; > >> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; > >> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; > >> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; > >> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; > >> + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; > >> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; > >> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; > >> + > >> + qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro"; > > > > Let's wait for Kalle's response. > > Sorry, I don't know what you refer to here. I have been extremly busy > with MLO patches so drowning with mail right now :/ Just an ack for the calibration variant name. Jianhua has also sent the BDF file, [1] [1] https://lore.kernel.org/ath11k/ZwR1hu-B0bGe4zG7@localhost.localdomain/
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes: > On Fri, Oct 11, 2024 at 02:08:19PM +0300, Kalle Valo wrote: >> Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes: >> >> >> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi >> >> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi >> >> @@ -680,6 +680,25 @@ &pcie0_phy { >> >> status = "okay"; >> >> }; >> >> >> >> +&pcieport0 { >> >> + wifi@0 { >> >> + compatible = "pci17cb,1101"; >> >> + reg = <0x10000 0x0 0x0 0x0 0x0>; >> >> + >> >> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; >> >> + vddaon-supply = <&vreg_pmu_aon_0p59>; >> >> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; >> >> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; >> >> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; >> >> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; >> >> + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; >> >> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; >> >> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; >> >> + >> >> + qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro"; >> > >> > Let's wait for Kalle's response. >> >> Sorry, I don't know what you refer to here. I have been extremly busy >> with MLO patches so drowning with mail right now :/ > > Just an ack for the calibration variant name. Ah, then ack from me for the name. Thanks for following these.
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index ebea283f56ea..7a55e271c3ac 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -680,6 +680,25 @@ &pcie0_phy { status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1101"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + + qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro"; + }; +}; + &pm8150_gpios { vol_up_n: vol-up-n-state { pins = "gpio6";
Add wifi node and this wifi module is connected to PCIe port. The following is qca6390 probe message: ath11k_pci 0000:01:00.0: Adding to iommu group 12 ath11k_pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x604fffff 64bit]: assigned ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002) ath11k_pci 0000:01:00.0: MSI vectors: 32 ath11k_pci 0000:01:00.0: qca6390 hw2.0 ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff ath11k_pci 0000:01:00.0: fw_version 0x10121492 fw_build_timestamp 2021-11-04 11:23 fw_build_id Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> --- changes in v3: 1. fix commit message typo (pice -> PCIe). changes in v2: 1. add qcom,ath11k-calibration-variant property. .../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)