| Message ID | 20241011-topic-mcan-wakeup-source-v6-12-v3-1-9752c714ad12@baylibre.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | can: m_can: Add am62 wakeup support | expand |
On Fri, Oct 11, 2024 at 03:16:38PM +0200, Markus Schneider-Pargmann wrote: > m_can can be a wakeup source on some devices. Especially on some of the > am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup > the SoC. > > The wakeup-source property defines on which devices m_can can be used > for wakeup. > > The pins associated with m_can have to have a special configuration to > be able to wakeup the SoC. This configuration is described in the wakeup > pinctrl state while the default state describes the default > configuration. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > --- > .../devicetree/bindings/net/can/bosch,m_can.yaml | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index c4887522e8fe97c3947357b4dbd4ecf20ee8100a..0c1f9fa7371897d45539ead49c9d290fb4966f30 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -106,6 +106,22 @@ properties: maximum: 32 minItems: 1 + pinctrl-0: + description: Default pinctrl state + + pinctrl-1: + description: Wakeup pinctrl state + + pinctrl-names: + description: + When present should contain at least "default" describing the default pin + states. The second state called "wakeup" describes the pins in their + wakeup configuration required to exit sleep states. + minItems: 1 + items: + - const: default + - const: wakeup + power-domains: description: Power domain provider node and an args specifier containing @@ -122,6 +138,8 @@ properties: minItems: 1 maxItems: 2 + wakeup-source: true + required: - compatible - reg
m_can can be a wakeup source on some devices. Especially on some of the am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup the SoC. The wakeup-source property defines on which devices m_can can be used for wakeup. The pins associated with m_can have to have a special configuration to be able to wakeup the SoC. This configuration is described in the wakeup pinctrl state while the default state describes the default configuration. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> --- .../devicetree/bindings/net/can/bosch,m_can.yaml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)