[v8,1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures

Message ID	20241007194945.66192-2-vassilisamir@gmail.com (mailing list archive)
State	Changes Requested
Headers	show Received: from mail-wm1-f47.google.com (mail-wm1-f47.google.com [209.85.128.47]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E5ED51DE3A0; Mon, 7 Oct 2024 19:50:04 +0000 (UTC) From: Vasileios Amoiridis <vassilisamir@gmail.com> To: jic23@kernel.org, lars@metafoo.de, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, andriy.shevchenko@linux.intel.com Cc: vassilisamir@gmail.com, ang.iglesiasg@gmail.com, linus.walleij@linaro.org, biju.das.jz@bp.renesas.com, javier.carrasco.cruz@gmail.com, semen.protsenko@linaro.org, 579lpy@gmail.com, ak@it-klinger.de, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, christophe.jaillet@wanadoo.fr Subject: [PATCH v8 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures Date: Mon, 7 Oct 2024 21:49:42 +0200 Message-Id: <20241007194945.66192-2-vassilisamir@gmail.com> In-Reply-To: <20241007194945.66192-1-vassilisamir@gmail.com> References: <20241007194945.66192-1-vassilisamir@gmail.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	pressure: bmp280: Minor cleanup and interrupt support \| expand [v8,0/4] pressure: bmp280: Minor cleanup and interrupt support [v8,1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures [v8,2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices [v8,3/4] iio: pressure: bmp280: Add data ready trigger support [v8,4/4] iio: pressure: bmp280: Move bmp085 interrupt to new configuration

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 6811619c6f11..9ad29cf4c2ac 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -16,6 +16,11 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * + * Sensor API: + * https://github.com/boschsensortec/BME280_SensorAPI + * https://github.com/boschsensortec/BMP3_SensorAPI + * https://github.com/boschsensortec/BMP5_SensorAPI + * * Notice: * The link to the bmp180 datasheet points to an outdated version missing these changes: * - Changed document referral from ANP015 to BST-MPS-AN004-00 on page 26 @@ -616,6 +621,14 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_PROCESSED: + ret = data->chip_info->set_mode(data, BMP280_FORCED); + if (ret) + return ret; + + ret = data->chip_info->wait_conv(data); + if (ret) + return ret; + switch (chan->type) { case IIO_HUMIDITYRELATIVE: ret = data->chip_info->read_humid(data, &chan_value); @@ -645,6 +658,14 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev, return -EINVAL; } case IIO_CHAN_INFO_RAW: + ret = data->chip_info->set_mode(data, BMP280_FORCED); + if (ret) + return ret; + + ret = data->chip_info->wait_conv(data); + if (ret) + return ret; + switch (chan->type) { case IIO_HUMIDITYRELATIVE: ret = data->chip_info->read_humid(data, &chan_value); @@ -991,6 +1012,69 @@ static int bmp280_preinit(struct bmp280_data *data) return 0; } +static const u8 bmp280_operation_mode[] = { + BMP280_MODE_SLEEP, BMP280_MODE_FORCED, BMP280_MODE_NORMAL, +}; + +static int bmp280_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + int ret; + + switch (mode) { + case BMP280_SLEEP: + case BMP280_FORCED: + case BMP280_NORMAL: + break; + default: + return -EINVAL; + } + + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, + BMP280_MODE_MASK, bmp280_operation_mode[mode]); + if (ret) { + dev_err(data->dev, "failed to write ctrl_meas register.\n"); + return ret; + } + + data->op_mode = mode; + + return 0; +} + +static int bmp280_wait_conv(struct bmp280_data *data) +{ + unsigned int reg, meas_time_us; + int ret; + + /* Check if we are using a BME280 device */ + if (data->oversampling_humid) + meas_time_us += BMP280_PRESS_HUMID_MEAS_OFFSET + + BIT(data->oversampling_humid) * BMP280_MEAS_DUR; + + /* Pressure measurement time */ + meas_time_us += BMP280_PRESS_HUMID_MEAS_OFFSET + + BIT(data->oversampling_press) * BMP280_MEAS_DUR; + + /* Temperature measurement time */ + meas_time_us += BIT(data->oversampling_temp) * BMP280_MEAS_DUR; + + /* Waiting time according to the BM(P/E)2 Sensor API */ + fsleep(meas_time_us); + + ret = regmap_read(data->regmap, BMP280_REG_STATUS, &reg); + if (ret) { + dev_err(data->dev, "failed to read status register.\n"); + return ret; + } + + if (reg & BMP280_REG_STATUS_MEAS_BIT) { + dev_err(data->dev, "Measurement cycle didn't complete.\n"); + return -EBUSY; + } + + return 0; +} + static int bmp280_chip_config(struct bmp280_data *data) { u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) | @@ -1001,7 +1085,7 @@ static int bmp280_chip_config(struct bmp280_data *data) BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, - osrs | BMP280_MODE_NORMAL); + osrs | BMP280_MODE_SLEEP); if (ret) { dev_err(data->dev, "failed to write ctrl_meas register\n"); return ret; @@ -1111,6 +1195,8 @@ const struct bmp280_chip_info bmp280_chip_info = { .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, .read_calib = bmp280_read_calib, + .set_mode = bmp280_set_mode, + .wait_conv = bmp280_wait_conv, .preinit = bmp280_preinit, .trigger_handler = bmp280_trigger_handler, @@ -1235,6 +1321,8 @@ const struct bmp280_chip_info bme280_chip_info = { .read_press = bmp280_read_press, .read_humid = bme280_read_humid, .read_calib = bme280_read_calib, + .set_mode = bmp280_set_mode, + .wait_conv = bmp280_wait_conv, .preinit = bmp280_preinit, .trigger_handler = bme280_trigger_handler, @@ -1522,6 +1610,71 @@ static int bmp380_preinit(struct bmp280_data *data) return bmp380_cmd(data, BMP380_CMD_SOFT_RESET); } +static const u8 bmp380_operation_mode[] = { + BMP380_MODE_SLEEP, BMP380_MODE_FORCED, BMP380_MODE_NORMAL, +}; + +static int bmp380_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + int ret; + + switch (mode) { + case BMP280_SLEEP: + case BMP280_FORCED: + case BMP280_NORMAL: + break; + default: + return -EINVAL; + } + + ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, + BMP380_MODE_MASK, + FIELD_PREP(BMP380_MODE_MASK, + bmp380_operation_mode[mode])); + if (ret) { + dev_err(data->dev, "failed to write power control register.\n"); + return ret; + } + + data->op_mode = mode; + + return 0; +} + +static int bmp380_wait_conv(struct bmp280_data *data) +{ + unsigned int reg; + int ret, meas_time_us; + + /* Offset measurement time */ + meas_time_us = BMP380_MEAS_OFFSET; + + /* Pressure measurement time */ + meas_time_us += BMP380_PRESS_MEAS_OFFSET + + BIT(data->oversampling_press) * BMP380_MEAS_DUR; + + /* Temperature measurement time */ + meas_time_us += BMP380_TEMP_MEAS_OFFSET + + BIT(data->oversampling_temp) * BMP380_MEAS_DUR; + + /* Measurement time defined in Datasheet Section 3.9.2 */ + fsleep(meas_time_us); + + ret = regmap_read(data->regmap, BMP380_REG_STATUS, &reg); + if (ret) { + dev_err(data->dev, "failed to read status register.\n"); + return ret; + } + + if (!((reg & BMP380_STATUS_DRDY_PRESS_MASK) && + (reg & BMP380_STATUS_DRDY_TEMP_MASK))) { + dev_err(data->dev, "Measurement cycle didn't complete.\n"); + return -EBUSY; + } + + return 0; +} + static int bmp380_chip_config(struct bmp280_data *data) { bool change = false, aux; @@ -1582,17 +1735,19 @@ static int bmp380_chip_config(struct bmp280_data *data) * Resets sensor measurement loop toggling between sleep and * normal operating modes. */ - ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, - BMP380_MODE_MASK, - FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP)); + ret = bmp380_set_mode(data, BMP280_SLEEP); if (ret) { dev_err(data->dev, "failed to set sleep mode\n"); return ret; } - usleep_range(2000, 2500); - ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, - BMP380_MODE_MASK, - FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL)); + + /* + * According to the BMP3 Sensor API, the sensor needs 5ms + * in order to go to the sleep mode. + */ + fsleep(5 * USEC_PER_MSEC); + + ret = bmp380_set_mode(data, BMP280_NORMAL); if (ret) { dev_err(data->dev, "failed to set normal mode\n"); return ret; @@ -1618,7 +1773,16 @@ static int bmp380_chip_config(struct bmp280_data *data) } } - return 0; + /* Dummy read to empty data registers. */ + ret = bmp380_read_press(data, &tmp); + if (ret) + return ret; + + ret = bmp380_set_mode(data, BMP280_SLEEP); + if (ret) + dev_err(data->dev, "failed to set sleep mode.\n"); + + return ret; } static irqreturn_t bmp380_trigger_handler(int irq, void *p) @@ -1714,6 +1878,8 @@ const struct bmp280_chip_info bmp380_chip_info = { .read_temp = bmp380_read_temp, .read_press = bmp380_read_press, .read_calib = bmp380_read_calib, + .set_mode = bmp380_set_mode, + .wait_conv = bmp380_wait_conv, .preinit = bmp380_preinit, .trigger_handler = bmp380_trigger_handler, @@ -2101,6 +2267,75 @@ static int bmp580_preinit(struct bmp280_data *data) return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config)); } +static const u8 bmp580_operation_mode[] = { + BMP580_MODE_SLEEP, BMP580_MODE_FORCED, BMP580_MODE_NORMAL, +}; + +static int bmp580_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + struct device *dev = data->dev; + int ret; + + switch (mode) { + case BMP280_SLEEP: + case BMP280_NORMAL: + break; + case BMP280_FORCED: + ret = regmap_set_bits(data->regmap, BMP580_REG_DSP_CONFIG, + BMP580_DSP_IIR_FORCED_FLUSH); + if (ret) { + dev_err(dev, "Could not flush IIR filter constants.\n"); + return ret; + } + break; + default: + return -EINVAL; + } + + ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK, + FIELD_PREP(BMP580_MODE_MASK, + bmp580_operation_mode[mode])); + if (ret) { + dev_err(dev, "failed to write power control register.\n"); + return ret; + } + + data->op_mode = mode; + + return 0; +} + +static int bmp580_wait_conv(struct bmp280_data *data) +{ + /* + * Taken from datasheet, Section 2 "Specification, Table 3 "Electrical + * characteristics. + */ + static const int time_conv_press[] = { + 0, 1050, 1785, 3045, 5670, 10920, 21420, 42420, + 84420, + }; + static const int time_conv_temp[] = { + 0, 1050, 1105, 1575, 2205, 3465, 6090, 11340, + 21840, + }; + int meas_time_us; + + meas_time_us = 4 * USEC_PER_MSEC + + time_conv_temp[data->oversampling_temp] + + time_conv_press[data->oversampling_press]; + + /* + * Measurement time mentioned in Chapter 2, Table 4 of the datasheet. + * The extra 4ms is the required mode change to start of measurement + * time. + */ + fsleep(meas_time_us); + + return 0; +} + static int bmp580_chip_config(struct bmp280_data *data) { bool change = false, aux; @@ -2171,17 +2406,6 @@ static int bmp580_chip_config(struct bmp280_data *data) return ret; } - /* Restore sensor to normal operation mode */ - ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, - BMP580_MODE_MASK, - FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL)); - if (ret) { - dev_err(data->dev, "failed to set normal mode\n"); - return ret; - } - /* From datasheet's table 4: electrical characteristics */ - usleep_range(3000, 3500); - if (change) { /* * Check if ODR and OSR settings are valid or we are @@ -2279,6 +2503,8 @@ const struct bmp280_chip_info bmp580_chip_info = { .chip_config = bmp580_chip_config, .read_temp = bmp580_read_temp, .read_press = bmp580_read_press, + .set_mode = bmp580_set_mode, + .wait_conv = bmp580_wait_conv, .preinit = bmp580_preinit, .trigger_handler = bmp580_trigger_handler, @@ -2526,6 +2752,19 @@ static int bmp180_read_press(struct bmp280_data *data, u32 *comp_press) return 0; } +/* Keep compatibility with newer generations of the sensor */ +static int bmp180_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + return 0; +} + +/* Keep compatibility with newer generations of the sensor */ +static int bmp180_wait_conv(struct bmp280_data *data) +{ + return 0; +} + +/* Keep compatibility with newer generations of the sensor */ static int bmp180_chip_config(struct bmp280_data *data) { return 0; @@ -2597,6 +2836,8 @@ const struct bmp280_chip_info bmp180_chip_info = { .read_temp = bmp180_read_temp, .read_press = bmp180_read_press, .read_calib = bmp180_read_calib, + .set_mode = bmp180_set_mode, + .wait_conv = bmp180_wait_conv, .trigger_handler = bmp180_trigger_handler, }; @@ -2649,6 +2890,7 @@ static int bmp280_buffer_preenable(struct iio_dev *indio_dev) struct bmp280_data *data = iio_priv(indio_dev); pm_runtime_get_sync(data->dev); + data->chip_info->set_mode(data, BMP280_NORMAL); return 0; } @@ -2819,6 +3061,10 @@ int bmp280_common_probe(struct device *dev, return ret; } + ret = data->chip_info->set_mode(data, BMP280_SLEEP); + if (ret) + return dev_err_probe(dev, ret, "Failed to set sleep mode\n"); + /* Enable runtime PM */ pm_runtime_get_noresume(dev); pm_runtime_set_active(dev); @@ -2844,6 +3090,9 @@ static int bmp280_runtime_suspend(struct device *dev) struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmp280_data *data = iio_priv(indio_dev); + data->chip_info->set_mode(data, BMP280_SLEEP); + + fsleep(data->start_up_time); return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies); } @@ -2858,7 +3107,12 @@ static int bmp280_runtime_resume(struct device *dev) return ret; usleep_range(data->start_up_time, data->start_up_time + 100); - return data->chip_info->chip_config(data); + + ret = data->chip_info->chip_config(data); + if (ret) + return ret; + + return data->chip_info->set_mode(data, data->op_mode); } EXPORT_RUNTIME_DEV_PM_OPS(bmp280_dev_pm_ops, bmp280_runtime_suspend, diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index dc1bf04cb0b5..3babf90ce73c 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -170,6 +170,11 @@ #define BMP380_MODE_FORCED 1 #define BMP380_MODE_NORMAL 3 +#define BMP380_MEAS_OFFSET 234 +#define BMP380_MEAS_DUR 2020 +#define BMP380_TEMP_MEAS_OFFSET 163 +#define BMP380_PRESS_MEAS_OFFSET 392 + #define BMP380_MIN_TEMP -4000 #define BMP380_MAX_TEMP 8500 #define BMP380_MIN_PRES 3000000 @@ -206,6 +211,7 @@ #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 #define BMP280_REG_STATUS_IM_UPDATE BIT(0) +#define BMP280_REG_STATUS_MEAS_BIT BIT(3) #define BMP280_REG_RESET 0xE0 #define BMP280_RST_SOFT_CMD 0xB6 @@ -246,6 +252,10 @@ #define BMP280_MODE_FORCED 1 #define BMP280_MODE_NORMAL 3 +#define BMP280_MEAS_OFFSET 1250 +#define BMP280_MEAS_DUR 2300 +#define BMP280_PRESS_HUMID_MEAS_OFFSET 575 + /* BME280 specific registers */ #define BME280_REG_HUMIDITY_LSB 0xFE #define BME280_REG_HUMIDITY_MSB 0xFD @@ -385,6 +395,12 @@ struct bmp380_calib { s8 P11; }; +enum bmp280_op_mode { + BMP280_SLEEP, + BMP280_FORCED, + BMP280_NORMAL, +}; + struct bmp280_data { struct device *dev; struct mutex lock; @@ -423,6 +439,9 @@ struct bmp280_data { u8 sensor_data[ALIGN(sizeof(s32) * BME280_NUM_MAX_CHANNELS, sizeof(s64)) + sizeof(s64)] __aligned(sizeof(s64)); + /* Value to hold the current operation mode of the device */ + enum bmp280_op_mode op_mode; + /* * DMA (thus cache coherency maintenance) may require the * transfer buffers to live in their own cache lines. @@ -487,6 +506,8 @@ struct bmp280_chip_info { int (*read_humid)(struct bmp280_data *data, u32 *adc_humidity); int (*read_calib)(struct bmp280_data *data); int (*preinit)(struct bmp280_data *data); + int (*set_mode)(struct bmp280_data *data, enum bmp280_op_mode mode); + int (*wait_conv)(struct bmp280_data *data); irqreturn_t (*trigger_handler)(int irq, void *p); };

[v8,1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures

Commit Message

Comments

Patch