diff mbox series

[v2,1/9] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Add panel-timing node to panel node

Message ID 20241012073543.1388069-2-victor.liu@nxp.com (mailing list archive)
State New, archived
Headers show
Series Add ITE IT6263 LVDS to HDMI converter support | expand

Commit Message

Liu Ying Oct. 12, 2024, 7:35 a.m. UTC
Add a panel-timing node to panel node to override any fixed display
modes written in a panel driver.  This way, 68.9MHz clock frequency
specified in panel-timing node may accommodate 7-fold 482.3MHz
"media_ldb" clock which is derived from 964.6MHz "video_pll1" clock.
The above clock frequencies align to the clock rates assigned in the
lvds_bridge node and media_blk_ctrl node in this DT file.

This should be able to suppress this LDB driver warning:
[   17.206644] fsl-ldb 32ec0000.blk-ctrl:bridge@5c: Configured LDB clock (70000000 Hz) does not match requested LVDS clock: 490000000 Hz

This also makes the display mode used by the panel pass mode validation
against pixel clock rate and "media_ldb" clock rate in a certain display
driver.

Fixes: 6d382d51d979 ("arm64: dts: freescale: Add SKOV IMX8MP CPU revB board")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v2:
* No change.

 .../freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Marek Vasut Oct. 12, 2024, 8:33 p.m. UTC | #1
On 10/12/24 9:35 AM, Liu Ying wrote:
> Add a panel-timing node to panel node to override any fixed display
> modes written in a panel driver.  This way, 68.9MHz clock frequency
> specified in panel-timing node may accommodate 7-fold 482.3MHz
> "media_ldb" clock which is derived from 964.6MHz "video_pll1" clock.
> The above clock frequencies align to the clock rates assigned in the
> lvds_bridge node and media_blk_ctrl node in this DT file.
> 
> This should be able to suppress this LDB driver warning:
> [   17.206644] fsl-ldb 32ec0000.blk-ctrl:bridge@5c: Configured LDB clock (70000000 Hz) does not match requested LVDS clock: 490000000 Hz
> 
> This also makes the display mode used by the panel pass mode validation
> against pixel clock rate and "media_ldb" clock rate in a certain display
> driver.
> 
> Fixes: 6d382d51d979 ("arm64: dts: freescale: Add SKOV IMX8MP CPU revB board")
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v2:
> * No change.
> 
>   .../freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
> index 3c2efdc59bfa..4e9f76de7462 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
> @@ -13,6 +13,21 @@ panel {
>   		backlight = <&backlight>;
>   		power-supply = <&reg_tft_vcom>;
>   
> +		panel-timing {
> +			clock-frequency = <68900000>;
> +			hactive = <1280>;
> +			vactive = <800>;
> +			hfront-porch = <30>;
> +			hback-porch = <30>;
> +			hsync-len = <10>;
> +			vfront-porch = <5>;
> +			vback-porch = <5>;
> +			vsync-len = <5>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +		};
There is an existing entry for this panel in panel-simple.c , please do 
not duplicate timings in the DT:

drivers/gpu/drm/panel/panel-simple.c:   .timings = 
&multi_inno_mi1010ait_1cp_timing,
drivers/gpu/drm/panel/panel-simple.c:           .compatible = 
"multi-inno,mi1010ait-1cp",
drivers/gpu/drm/panel/panel-simple.c:           .data = 
&multi_inno_mi1010ait_1cp,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
index 3c2efdc59bfa..4e9f76de7462 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -13,6 +13,21 @@  panel {
 		backlight = <&backlight>;
 		power-supply = <&reg_tft_vcom>;
 
+		panel-timing {
+			clock-frequency = <68900000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <30>;
+			hback-porch = <30>;
+			hsync-len = <10>;
+			vfront-porch = <5>;
+			vback-porch = <5>;
+			vsync-len = <5>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+		};
+
 		port {
 			in_lvds0: endpoint {
 				remote-endpoint = <&ldb_lvds_ch0>;