| Message ID | 20241012073543.1388069-7-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add ITE IT6263 LVDS to HDMI converter support | expand |
On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > Add basic HDMI video output support. Currently, only RGB888 output > pixel format is supported. At the LVDS input side, the driver > supports single LVDS link and dual LVDS links with "jeida-24" LVDS > mapping. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v2: > * Add AVI inforframe support. (Maxime) Maxime asked to wire up the HDMI Connector framework. I have pushed the patch that converts lt9611.c driver. Please implement similar changes in your driver. > * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > * Rename it6263_reset() to it6263_hw_reset(). (Biju) > * Check number of LVDS link data lanes. (Biju) > > drivers/gpu/drm/bridge/Kconfig | 8 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ > 3 files changed, 928 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index 3eb955333c80..93f99682a090 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -90,6 +90,14 @@ config DRM_FSL_LDB > help > Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > +config DRM_ITE_IT6263 > + tristate "ITE IT6263 LVDS/HDMI bridge" > + depends on OF > + select DRM_KMS_HELPER > + select REGMAP_I2C > + help > + ITE IT6263 LVDS to HDMI bridge chip driver. > + > config DRM_ITE_IT6505 > tristate "ITE IT6505 DisplayPort bridge" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index 7df87b582dca..f3776dd473fd 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o > diff --git a/drivers/gpu/drm/bridge/ite-it6263.c b/drivers/gpu/drm/bridge/ite-it6263.c > new file mode 100644 > index 000000000000..9b3318792f15 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/ite-it6263.c > @@ -0,0 +1,919 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2024 NXP > + */ > + > +#include <linux/bitfield.h> > +#include <linux/bits.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/hdmi.h> > +#include <linux/i2c.h> > +#include <linux/media-bus-format.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_atomic_state_helper.h> > +#include <drm/drm_bridge.h> > +#include <drm/drm_connector.h> > +#include <drm/drm_crtc.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_of.h> > +#include <drm/drm_probe_helper.h> > + > +/* ----------------------------------------------------------------------------- > + * LVDS registers > + */ > + > +/* LVDS software reset registers */ > +#define LVDS_REG_05 0x05 > +#define REG_SOFT_P_RST BIT(1) > + > +/* LVDS system configuration registers */ > +/* 0x0b */ > +#define LVDS_REG_0B 0x0b > +#define REG_SSC_PCLK_RF BIT(0) > +#define REG_LVDS_IN_SWAP BIT(1) > + > +/* LVDS test pattern gen control registers */ > +/* 0x2c */ > +#define LVDS_REG_2C 0x2c > +#define REG_COL_DEP GENMASK(1, 0) > +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > +#define OUT_MAP BIT(4) > +#define JEIDA 0 > +#define REG_DESSC_ENB BIT(6) > +#define DMODE BIT(7) > +#define DISO BIT(7) > +#define SISO 0 > + > +#define LVDS_REG_3C 0x3c > +#define LVDS_REG_3F 0x3f > +#define LVDS_REG_47 0x47 > +#define LVDS_REG_48 0x48 > +#define LVDS_REG_4F 0x4f > +#define LVDS_REG_52 0x52 > + > +/* ----------------------------------------------------------------------------- > + * HDMI registers are separated into three banks: > + * 1) HDMI register common bank: 0x00 ~ 0x2f > + */ > + > +/* HDMI genernal registers */ > +#define HDMI_REG_SW_RST 0x04 > +#define SOFTREF_RST BIT(5) > +#define SOFTA_RST BIT(4) > +#define SOFTV_RST BIT(3) > +#define AUD_RST BIT(2) > +#define HDCP_RST BIT(0) > +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > + AUD_RST | HDCP_RST) > + > +#define HDMI_REG_SYS_STATUS 0x0e > +#define HPDETECT BIT(6) > +#define TXVIDSTABLE BIT(4) > + > +#define HDMI_REG_BANK_CTRL 0x0f > +#define REG_BANK_SEL BIT(0) > + > +/* HDMI System DDC control registers */ > +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > +#define MASTER_SEL_HOST BIT(0) > + > +#define HDMI_REG_DDC_HEADER 0x11 > + > +#define HDMI_REG_DDC_REQOFF 0x12 > +#define HDMI_REG_DDC_REQCOUNT 0x13 > +#define HDMI_REG_DDC_EDIDSEG 0x14 > + > +#define HDMI_REG_DDC_CMD 0x15 > +#define DDC_CMD_EDID_READ 0x3 > +#define DDC_CMD_FIFO_CLR 0x9 > + > +#define HDMI_REG_DDC_STATUS 0x16 > +#define DDC_DONE BIT(7) > +#define DDC_NOACK BIT(5) > +#define DDC_WAITBUS BIT(4) > +#define DDC_ARBILOSE BIT(3) > +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > + > +#define HDMI_DDC_FIFO_BYTES 32 > +#define HDMI_REG_DDC_READFIFO 0x17 > +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > +#define HDMI_REG_LVDS_PORT_EN 0x1e > +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > + > +/* ----------------------------------------------------------------------------- > + * 2) HDMI register bank0: 0x30 ~ 0xff > + */ > + > +/* HDMI AFE registers */ > +#define HDMI_REG_AFE_DRV_CTRL 0x61 > +#define AFE_DRV_PWD BIT(5) > +#define AFE_DRV_RST BIT(4) > + > +#define HDMI_REG_AFE_XP_CTRL 0x62 > +#define AFE_XP_GAINBIT BIT(7) > +#define AFE_XP_ER0 BIT(4) > +#define AFE_XP_RESETB BIT(3) > + > +#define HDMI_REG_AFE_ISW_CTRL 0x63 > + > +#define HDMI_REG_AFE_IP_CTRL 0x64 > +#define AFE_IP_GAINBIT BIT(7) > +#define AFE_IP_ER0 BIT(3) > +#define AFE_IP_RESETB BIT(2) > + > +/* HDMI input data format registers */ > +#define HDMI_REG_INPUT_MODE 0x70 > +#define IN_RGB 0x00 > + > +/* HDMI general control registers */ > +#define HDMI_REG_HDMI_MODE 0xc0 > +#define TX_HDMI_MODE BIT(0) > + > +#define HDMI_REG_GCP 0xc1 > +#define AVMUTE BIT(0) > +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > + > +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > +#define ENABLE_PKT BIT(0) > +#define REPEAT_PKT BIT(1) > + > +/* ----------------------------------------------------------------------------- > + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) > + */ > + > +/* AVI packet registers */ > +#define HDMI_REG_AVI_DB1 0x158 > +#define HDMI_REG_AVI_DB2 0x159 > +#define HDMI_REG_AVI_DB3 0x15a > +#define HDMI_REG_AVI_DB4 0x15b > +#define HDMI_REG_AVI_DB5 0x15c > +#define HDMI_REG_AVI_CSUM 0x15d > +#define HDMI_REG_AVI_DB6 0x15e > +#define HDMI_REG_AVI_DB7 0x15f > +#define HDMI_REG_AVI_DB8 0x160 > +#define HDMI_REG_AVI_DB9 0x161 > +#define HDMI_REG_AVI_DB10 0x162 > +#define HDMI_REG_AVI_DB11 0x163 > +#define HDMI_REG_AVI_DB12 0x164 > +#define HDMI_REG_AVI_DB13 0x165 > + > +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) > +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) > + > +#define MAX_PIXEL_CLOCK_KHZ 150000 > +#define HIGH_PIXEL_CLOCK_KHZ 80000 > + > +struct it6263 { > + struct device *dev; > + struct i2c_client *hdmi_i2c; > + struct i2c_client *lvds_i2c; > + struct regmap *hdmi_regmap; > + struct regmap *lvds_regmap; > + struct drm_bridge bridge; > + struct drm_bridge *next_bridge; > + struct drm_connector connector; > + struct gpio_desc *reset_gpio; > + u8 lvds_link_num_dlanes; > + bool lvds_dual_link; > + bool lvds_link12_swap; > +}; > + > +static inline struct it6263 *bridge_to_it6263(struct drm_bridge *bridge) > +{ > + return container_of(bridge, struct it6263, bridge); > +} > + > +static inline struct it6263 *connector_to_it6263(struct drm_connector *conn) > +{ > + return container_of(conn, struct it6263, connector); > +} > + > +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case HDMI_REG_SW_RST: > + case HDMI_REG_BANK_CTRL: > + case HDMI_REG_DDC_MASTER_CTRL: > + case HDMI_REG_DDC_HEADER: > + case HDMI_REG_DDC_REQOFF: > + case HDMI_REG_DDC_REQCOUNT: > + case HDMI_REG_DDC_EDIDSEG: > + case HDMI_REG_DDC_CMD: > + case HDMI_REG_LVDS_PORT: > + case HDMI_REG_LVDS_PORT_EN: > + case HDMI_REG_AFE_DRV_CTRL: > + case HDMI_REG_AFE_XP_CTRL: > + case HDMI_REG_AFE_ISW_CTRL: > + case HDMI_REG_AFE_IP_CTRL: > + case HDMI_REG_INPUT_MODE: > + case HDMI_REG_HDMI_MODE: > + case HDMI_REG_GCP: > + case HDMI_REG_PKT_GENERAL_CTRL: > + case HDMI_REG_AVI_DB1: > + case HDMI_REG_AVI_DB2: > + case HDMI_REG_AVI_DB3: > + case HDMI_REG_AVI_DB4: > + case HDMI_REG_AVI_DB5: > + case HDMI_REG_AVI_CSUM: > + case HDMI_REG_AVI_DB6: > + case HDMI_REG_AVI_DB7: > + case HDMI_REG_AVI_DB8: > + case HDMI_REG_AVI_DB9: > + case HDMI_REG_AVI_DB10: > + case HDMI_REG_AVI_DB11: > + case HDMI_REG_AVI_DB12: > + case HDMI_REG_AVI_DB13: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int reg) > +{ > + if (it6263_hdmi_writeable_reg(dev, reg)) > + return true; > + > + switch (reg) { > + case HDMI_REG_SYS_STATUS: > + case HDMI_REG_DDC_STATUS: > + case HDMI_REG_DDC_READFIFO: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case HDMI_REG_SW_RST: > + case HDMI_REG_SYS_STATUS: > + case HDMI_REG_DDC_STATUS: > + case HDMI_REG_DDC_READFIFO: > + return true; > + default: > + return false; > + } > +} > + > +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > + .range_min = 0x00, > + .range_max = HDMI_REG_AVI_DB13, > + .selector_reg = HDMI_REG_BANK_CTRL, > + .selector_mask = REG_BANK_SEL, > + .selector_shift = 0, > + .window_start = 0x00, > + .window_len = 0x100, > +}; > + > +static const struct regmap_config it6263_hdmi_regmap_config = { > + .name = "it6263-hdmi", > + .reg_bits = 8, > + .val_bits = 8, > + .writeable_reg = it6263_hdmi_writeable_reg, > + .readable_reg = it6263_hdmi_readable_reg, > + .volatile_reg = it6263_hdmi_volatile_reg, > + .max_register = HDMI_REG_AVI_DB13, > + .ranges = &it6263_hdmi_range_cfg, > + .num_ranges = 1, > + .cache_type = REGCACHE_MAPLE, > +}; > + > +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case LVDS_REG_05: > + case LVDS_REG_0B: > + case LVDS_REG_2C: > + case LVDS_REG_3C: > + case LVDS_REG_3F: > + case LVDS_REG_47: > + case LVDS_REG_48: > + case LVDS_REG_4F: > + case LVDS_REG_52: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int reg) > +{ > + return it6263_lvds_writeable_reg(dev, reg); > +} > + > +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int reg) > +{ > + return reg == LVDS_REG_05; > +} > + > +static const struct regmap_config it6263_lvds_regmap_config = { > + .name = "it6263-lvds", > + .reg_bits = 8, > + .val_bits = 8, > + .writeable_reg = it6263_lvds_writeable_reg, > + .readable_reg = it6263_lvds_readable_reg, > + .volatile_reg = it6263_lvds_volatile_reg, > + .max_register = LVDS_REG_52, > + .cache_type = REGCACHE_MAPLE, > +}; > + > +static const char * const it6263_supplies[] = { > + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > + "avcc", "anvdd", "apvdd" > +}; > + > +static int it6263_parse_dt(struct it6263 *it) > +{ > + struct device *dev = it->dev; > + struct device_node *port0, *port1; > + int ret; > + > + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > + &it->lvds_link_num_dlanes); > + if (ret) { > + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > + ret); > + return ret; > + } > + > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > + if (IS_ERR(it->next_bridge)) > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > + "failed to get next bridge\n"); > + > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > + if (port0 && port1) { > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > + it->lvds_dual_link = true; > + it->lvds_link12_swap = true; This is a nice name for the propery in the Dual Link LVDS case: ite,lvds-link-swap > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > + it->lvds_dual_link = true; > + } > + > + if (!it->lvds_dual_link) { > + dev_err(dev, > + "failed to get LVDS dual link pixel order\n"); > + ret = -EINVAL; > + } > + } else if (port1) { > + ret = -EINVAL; > + dev_err(dev, "single input LVDS port1 is not supported\n"); > + } else if (!port0) { > + ret = -EINVAL; > + dev_err(dev, "no input LVDS port\n"); > + } > + > + of_node_put(port0); > + of_node_put(port1); > + > + return ret; > +} > + > +static inline void it6263_hw_reset(struct it6263 *it) > +{ > + if (!it->reset_gpio) > + return; > + > + gpiod_set_value_cansleep(it->reset_gpio, 0); > + fsleep(1000); > + gpiod_set_value_cansleep(it->reset_gpio, 1); > + /* The chip maker says the low pulse should be at least 40ms. */ > + fsleep(40000); > + gpiod_set_value_cansleep(it->reset_gpio, 0); > + /* addtional time to wait the high voltage to be stable */ > + fsleep(5000); > +} > + > +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) > +{ > + int ret; > + > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > + LVDS_INPUT_CTRL_I2C_ADDR << 1); > + if (ret) > + return ret; > + > + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); > +} > + > +static inline void it6263_lvds_reset(struct it6263 *it) > +{ > + /* AFE PLL reset */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > + fsleep(1000); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > + > + /* software pixel clock domain reset */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > + REG_SOFT_P_RST); > + fsleep(1000); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > + fsleep(10000); > +} > + > +static inline void it6263_lvds_set_interface(struct it6263 *it) > +{ > + /* color depth */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > + /* output mapping */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > + > + if (it->lvds_dual_link) { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > + } else { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > + } > +} > + > +static inline void it6263_lvds_set_afe(struct it6263 *it) > +{ > + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > + > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > + REG_SSC_PCLK_RF); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > + REG_DESSC_ENB); > +} > + > +static inline void it6263_lvds_sys_cfg(struct it6263 *it) > +{ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); > +} > + > +static inline void it6263_lvds_config(struct it6263 *it) > +{ > + it6263_lvds_reset(it); > + it6263_lvds_set_interface(it); > + it6263_lvds_set_afe(it); > + it6263_lvds_sys_cfg(it); > +} > + > +static inline void it6263_hdmi_config(struct it6263 *it) > +{ > + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > + HDMI_COLOR_DEPTH_24); > +} > + > +static enum drm_connector_status it6263_detect(struct it6263 *it) > +{ > + unsigned int val; > + > + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > + if (val & HPDETECT) > + return connector_status_connected; > + else > + return connector_status_disconnected; > +} > + > +static enum drm_connector_status > +it6263_connector_detect(struct drm_connector *connector, bool force) > +{ > + struct it6263 *it = connector_to_it6263(connector); > + > + return it6263_detect(it); > +} > + > +static const struct drm_connector_funcs it6263_connector_funcs = { > + .detect = it6263_connector_detect, > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, size_t len) > +{ > + struct it6263 *it = data; > + struct regmap *regmap = it->hdmi_regmap; > + unsigned int start = (block % 2) * EDID_LENGTH; > + unsigned int segment = block >> 1; > + unsigned int count, val; > + int ret; > + > + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > + > + while (len) { > + /* clear DDC FIFO */ > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > + > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > + val, val & DDC_DONE, > + 2000, 10000); > + if (ret) { > + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > + return ret; > + } > + > + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > + > + /* fire the read command */ > + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > + > + start += count; > + len -= count; > + > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > + val & (DDC_DONE | DDC_ERROR), > + 20000, 250000); > + if (ret && !(val & DDC_ERROR)) { > + dev_err(it->dev, "failed to read EDID:%d\n", ret); > + return ret; > + } > + > + if (val & DDC_ERROR) { > + dev_err(it->dev, "DDC error\n"); > + return -EIO; > + } > + > + /* cache to buffer */ > + for (; count > 0; count--) { > + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > + *(buf++) = val; > + } > + } > + > + return 0; > +} > + > +static int it6263_connector_get_modes(struct drm_connector *connector) > +{ > + struct it6263 *it = connector_to_it6263(connector); > + const struct drm_edid *drm_edid; > + int count; > + > + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > + > + drm_edid_connector_update(connector, drm_edid); > + count = drm_edid_connector_add_modes(connector); > + > + drm_edid_free(drm_edid); > + > + return count; > +} > + > +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > + .get_modes = it6263_connector_get_modes, > +}; > + > +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + struct drm_display_mode *mode = &crtc_state->adjusted_mode; Use drm_atomic_helper_connector_hdmi_check(). Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual link LVDS have different max clock rates. Please correct me if I'm wrong. > + > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; > +} > + > +static void > +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > + AFE_DRV_RST | AFE_DRV_PWD); > +} > + > +static void > +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, > + struct drm_connector *connector, > + const struct drm_display_mode *mode) -> .hdmi_write_infoframe() , .hdmi_clear_infoframe(). > +{ > + struct hdmi_avi_infoframe frame; > + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; > + int ret; > + > + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); > + if (ret) { > + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); > + return; > + } > + > + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); > + if (ret < 0) { > + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); > + return; > + } > + > + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ > + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, > + &buf[HDMI_INFOFRAME_HEADER_SIZE], > + HDMI_AVI_DB_CHUNK1_SIZE); > + if (ret) { > + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", > + ret); > + return; > + } > + > + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ > + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, > + &buf[HDMI_INFOFRAME_HEADER_SIZE + > + HDMI_AVI_DB_CHUNK1_SIZE], > + HDMI_AVI_DB_CHUNK2_SIZE); > + if (ret) { > + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", > + ret); > + return; > + } > + > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); > + if (ret) > + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", > + ret); > +} > + > +static void > +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct drm_atomic_state *state = old_bridge_state->base.state; > + struct it6263 *it = bridge_to_it6263(bridge); > + const struct drm_crtc_state *crtc_state; > + struct regmap *regmap = it->hdmi_regmap; > + const struct drm_display_mode *mode; > + struct drm_connector *connector; > + bool is_stable = false; > + struct drm_crtc *crtc; > + unsigned int val; > + bool pclk_high; > + int i, ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, > + bridge->encoder); > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > + mode = &crtc_state->adjusted_mode; > + > + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > + > + it6263_hdmi_avi_infoframe_configure(it, connector, mode); drm_atomic_helper_connector_hdmi_update_infoframes > + > + /* HDMI AFE setup */ > + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > + if (pclk_high) > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > + AFE_XP_GAINBIT | AFE_XP_RESETB); > + else > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > + AFE_XP_ER0 | AFE_XP_RESETB); > + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > + if (pclk_high) > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > + AFE_IP_GAINBIT | AFE_IP_RESETB); > + else > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > + AFE_IP_ER0 | AFE_IP_RESETB); > + > + /* HDMI software video reset */ > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > + fsleep(1000); > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > + > + /* reconfigure LVDS and retry several times in case video is instable */ > + for (i = 0; i < 3; i++) { > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > + val & TXVIDSTABLE, > + 20000, 500000); > + if (!ret) { > + is_stable = true; > + break; > + } > + > + it6263_lvds_config(it); > + } > + > + if (!is_stable) > + dev_warn(it->dev, "failed to wait for video stable\n"); > + > + /* HDMI AFE reset release and power up */ > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > + > + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > + > + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | REPEAT_PKT); > +} > + > +static enum drm_mode_status > +it6263_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB); return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, rate); > +} > + > +static int it6263_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + int ret; > + > + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > + if (ret < 0) > + return ret; > + > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > + return 0; > + > + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > + DRM_CONNECTOR_POLL_DISCONNECT; > + Please strongly consider dropping this and using drm_bridge_connector in the host driver. > + ret = drm_connector_init(bridge->dev, &it->connector, > + &it6263_connector_funcs, > + DRM_MODE_CONNECTOR_HDMIA); > + if (ret) > + return ret; > + > + drm_connector_helper_add(&it->connector, > + &it6263_connector_helper_funcs); > + drm_connector_attach_encoder(&it->connector, bridge->encoder); > + > + return 0; > +} > + > +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge *bridge) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + > + return it6263_detect(it); > +} > + > +static const struct drm_edid * > +it6263_bridge_edid_read(struct drm_bridge *bridge, > + struct drm_connector *connector) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + > + return drm_edid_read_custom(connector, it6263_read_edid, it); > +} > + > +static u32 * > +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + u32 *input_fmts; > + > + *num_input_fmts = 0; > + > + if (it->lvds_link_num_dlanes == 3) > + return NULL; > + > + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > + if (!input_fmts) > + return NULL; > + > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > + *num_input_fmts = 1; > + > + return input_fmts; > +} > + > +static const struct drm_bridge_funcs it6263_bridge_funcs = { > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > + .attach = it6263_bridge_attach, > + .mode_valid = it6263_bridge_mode_valid, > + .atomic_disable = it6263_bridge_atomic_disable, > + .atomic_enable = it6263_bridge_atomic_enable, > + .atomic_check = it6263_bridge_atomic_check, > + .detect = it6263_bridge_detect, > + .edid_read = it6263_bridge_edid_read, > + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, > +}; > + > +static int it6263_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct it6263 *it; > + int ret; > + > + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > + if (!it) > + return -ENOMEM; > + > + it->dev = dev; > + it->hdmi_i2c = client; > + > + it->hdmi_regmap = devm_regmap_init_i2c(client, > + &it6263_hdmi_regmap_config); > + if (IS_ERR(it->hdmi_regmap)) > + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > + "failed to init I2C regmap for HDMI\n"); > + > + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(it->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > + "failed to get reset gpio\n"); > + > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > + it6263_supplies); > + if (ret) > + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > + > + ret = it6263_parse_dt(it); > + if (ret) > + return ret; > + > + it6263_hw_reset(it); > + > + ret = it6263_lvds_set_i2c_addr(it); > + if (ret) > + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > + > + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > + LVDS_INPUT_CTRL_I2C_ADDR); > + if (IS_ERR(it->lvds_i2c)) > + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > + "failed to allocate I2C device for LVDS\n"); > + > + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > + &it6263_lvds_regmap_config); > + if (IS_ERR(it->lvds_regmap)) > + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > + "failed to init I2C regmap for LVDS\n"); > + > + it6263_lvds_config(it); > + it6263_hdmi_config(it); > + > + i2c_set_clientdata(client, it); > + > + it->bridge.funcs = &it6263_bridge_funcs; > + it->bridge.of_node = dev->of_node; > + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; | DRM_BRIDGE_OP_HDMI BTW: No HPD IRQ support? > + it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; > + drm_bridge_add(&it->bridge); devm_drm_bridge_add() > + > + return 0; > +} > + > +static void it6263_remove(struct i2c_client *client) > +{ > + struct it6263 *it = i2c_get_clientdata(client); > + > + drm_bridge_remove(&it->bridge); Remove, it becomes unused with the devm_ function. > +} > + > +static const struct of_device_id it6263_of_match[] = { > + { .compatible = "ite,it6263", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, it6263_of_match); > + > +static const struct i2c_device_id it6263_i2c_ids[] = { > + { "it6263", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > + > +static struct i2c_driver it6263_driver = { > + .probe = it6263_probe, > + .remove = it6263_remove, > + .driver = { > + .name = "it6263", > + .of_match_table = it6263_of_match, > + }, > + .id_table = it6263_i2c_ids, > +}; > +module_i2c_driver(it6263_driver); > + > +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); > +MODULE_LICENSE("GPL"); > -- > 2.34.1 >
On 10/12/2024, Dmitry Baryshkov wrote: > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: >> Add basic HDMI video output support. Currently, only RGB888 output >> pixel format is supported. At the LVDS input side, the driver >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS >> mapping. >> >> Product link: >> https://www.ite.com.tw/en/product/cate1/IT6263 >> >> Signed-off-by: Liu Ying <victor.liu@nxp.com> >> --- >> v2: >> * Add AVI inforframe support. (Maxime) > > Maxime asked to wire up the HDMI Connector framework. I have pushed the > patch that converts lt9611.c driver. Please implement similar changes in > your driver. Hmm, didn't fully get the meaning of "the new HDMI bridge infrastructure" maxime asked. Ok, will take a look at lt9611.c. > >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) >> * Check number of LVDS link data lanes. (Biju) >> >> drivers/gpu/drm/bridge/Kconfig | 8 + >> drivers/gpu/drm/bridge/Makefile | 1 + >> drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ >> 3 files changed, 928 insertions(+) >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c >> >> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig >> index 3eb955333c80..93f99682a090 100644 >> --- a/drivers/gpu/drm/bridge/Kconfig >> +++ b/drivers/gpu/drm/bridge/Kconfig >> @@ -90,6 +90,14 @@ config DRM_FSL_LDB >> help >> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. >> >> +config DRM_ITE_IT6263 >> + tristate "ITE IT6263 LVDS/HDMI bridge" >> + depends on OF >> + select DRM_KMS_HELPER >> + select REGMAP_I2C >> + help >> + ITE IT6263 LVDS to HDMI bridge chip driver. >> + >> config DRM_ITE_IT6505 >> tristate "ITE IT6505 DisplayPort bridge" >> depends on OF >> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile >> index 7df87b582dca..f3776dd473fd 100644 >> --- a/drivers/gpu/drm/bridge/Makefile >> +++ b/drivers/gpu/drm/bridge/Makefile >> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o >> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o >> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o >> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o >> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o >> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o >> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o >> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o >> diff --git a/drivers/gpu/drm/bridge/ite-it6263.c b/drivers/gpu/drm/bridge/ite-it6263.c >> new file mode 100644 >> index 000000000000..9b3318792f15 >> --- /dev/null >> +++ b/drivers/gpu/drm/bridge/ite-it6263.c >> @@ -0,0 +1,919 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright 2024 NXP >> + */ >> + >> +#include <linux/bitfield.h> >> +#include <linux/bits.h> >> +#include <linux/delay.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/hdmi.h> >> +#include <linux/i2c.h> >> +#include <linux/media-bus-format.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/regmap.h> >> +#include <linux/regulator/consumer.h> >> + >> +#include <drm/drm_atomic.h> >> +#include <drm/drm_atomic_helper.h> >> +#include <drm/drm_atomic_state_helper.h> >> +#include <drm/drm_bridge.h> >> +#include <drm/drm_connector.h> >> +#include <drm/drm_crtc.h> >> +#include <drm/drm_edid.h> >> +#include <drm/drm_of.h> >> +#include <drm/drm_probe_helper.h> >> + >> +/* ----------------------------------------------------------------------------- >> + * LVDS registers >> + */ >> + >> +/* LVDS software reset registers */ >> +#define LVDS_REG_05 0x05 >> +#define REG_SOFT_P_RST BIT(1) >> + >> +/* LVDS system configuration registers */ >> +/* 0x0b */ >> +#define LVDS_REG_0B 0x0b >> +#define REG_SSC_PCLK_RF BIT(0) >> +#define REG_LVDS_IN_SWAP BIT(1) >> + >> +/* LVDS test pattern gen control registers */ >> +/* 0x2c */ >> +#define LVDS_REG_2C 0x2c >> +#define REG_COL_DEP GENMASK(1, 0) >> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) >> +#define OUT_MAP BIT(4) >> +#define JEIDA 0 >> +#define REG_DESSC_ENB BIT(6) >> +#define DMODE BIT(7) >> +#define DISO BIT(7) >> +#define SISO 0 >> + >> +#define LVDS_REG_3C 0x3c >> +#define LVDS_REG_3F 0x3f >> +#define LVDS_REG_47 0x47 >> +#define LVDS_REG_48 0x48 >> +#define LVDS_REG_4F 0x4f >> +#define LVDS_REG_52 0x52 >> + >> +/* ----------------------------------------------------------------------------- >> + * HDMI registers are separated into three banks: >> + * 1) HDMI register common bank: 0x00 ~ 0x2f >> + */ >> + >> +/* HDMI genernal registers */ >> +#define HDMI_REG_SW_RST 0x04 >> +#define SOFTREF_RST BIT(5) >> +#define SOFTA_RST BIT(4) >> +#define SOFTV_RST BIT(3) >> +#define AUD_RST BIT(2) >> +#define HDCP_RST BIT(0) >> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ >> + AUD_RST | HDCP_RST) >> + >> +#define HDMI_REG_SYS_STATUS 0x0e >> +#define HPDETECT BIT(6) >> +#define TXVIDSTABLE BIT(4) >> + >> +#define HDMI_REG_BANK_CTRL 0x0f >> +#define REG_BANK_SEL BIT(0) >> + >> +/* HDMI System DDC control registers */ >> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 >> +#define MASTER_SEL_HOST BIT(0) >> + >> +#define HDMI_REG_DDC_HEADER 0x11 >> + >> +#define HDMI_REG_DDC_REQOFF 0x12 >> +#define HDMI_REG_DDC_REQCOUNT 0x13 >> +#define HDMI_REG_DDC_EDIDSEG 0x14 >> + >> +#define HDMI_REG_DDC_CMD 0x15 >> +#define DDC_CMD_EDID_READ 0x3 >> +#define DDC_CMD_FIFO_CLR 0x9 >> + >> +#define HDMI_REG_DDC_STATUS 0x16 >> +#define DDC_DONE BIT(7) >> +#define DDC_NOACK BIT(5) >> +#define DDC_WAITBUS BIT(4) >> +#define DDC_ARBILOSE BIT(3) >> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) >> + >> +#define HDMI_DDC_FIFO_BYTES 32 >> +#define HDMI_REG_DDC_READFIFO 0x17 >> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ >> +#define HDMI_REG_LVDS_PORT_EN 0x1e >> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 >> + >> +/* ----------------------------------------------------------------------------- >> + * 2) HDMI register bank0: 0x30 ~ 0xff >> + */ >> + >> +/* HDMI AFE registers */ >> +#define HDMI_REG_AFE_DRV_CTRL 0x61 >> +#define AFE_DRV_PWD BIT(5) >> +#define AFE_DRV_RST BIT(4) >> + >> +#define HDMI_REG_AFE_XP_CTRL 0x62 >> +#define AFE_XP_GAINBIT BIT(7) >> +#define AFE_XP_ER0 BIT(4) >> +#define AFE_XP_RESETB BIT(3) >> + >> +#define HDMI_REG_AFE_ISW_CTRL 0x63 >> + >> +#define HDMI_REG_AFE_IP_CTRL 0x64 >> +#define AFE_IP_GAINBIT BIT(7) >> +#define AFE_IP_ER0 BIT(3) >> +#define AFE_IP_RESETB BIT(2) >> + >> +/* HDMI input data format registers */ >> +#define HDMI_REG_INPUT_MODE 0x70 >> +#define IN_RGB 0x00 >> + >> +/* HDMI general control registers */ >> +#define HDMI_REG_HDMI_MODE 0xc0 >> +#define TX_HDMI_MODE BIT(0) >> + >> +#define HDMI_REG_GCP 0xc1 >> +#define AVMUTE BIT(0) >> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) >> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) >> + >> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 >> +#define ENABLE_PKT BIT(0) >> +#define REPEAT_PKT BIT(1) >> + >> +/* ----------------------------------------------------------------------------- >> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) >> + */ >> + >> +/* AVI packet registers */ >> +#define HDMI_REG_AVI_DB1 0x158 >> +#define HDMI_REG_AVI_DB2 0x159 >> +#define HDMI_REG_AVI_DB3 0x15a >> +#define HDMI_REG_AVI_DB4 0x15b >> +#define HDMI_REG_AVI_DB5 0x15c >> +#define HDMI_REG_AVI_CSUM 0x15d >> +#define HDMI_REG_AVI_DB6 0x15e >> +#define HDMI_REG_AVI_DB7 0x15f >> +#define HDMI_REG_AVI_DB8 0x160 >> +#define HDMI_REG_AVI_DB9 0x161 >> +#define HDMI_REG_AVI_DB10 0x162 >> +#define HDMI_REG_AVI_DB11 0x163 >> +#define HDMI_REG_AVI_DB12 0x164 >> +#define HDMI_REG_AVI_DB13 0x165 >> + >> +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) >> +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) >> + >> +#define MAX_PIXEL_CLOCK_KHZ 150000 >> +#define HIGH_PIXEL_CLOCK_KHZ 80000 >> + >> +struct it6263 { >> + struct device *dev; >> + struct i2c_client *hdmi_i2c; >> + struct i2c_client *lvds_i2c; >> + struct regmap *hdmi_regmap; >> + struct regmap *lvds_regmap; >> + struct drm_bridge bridge; >> + struct drm_bridge *next_bridge; >> + struct drm_connector connector; >> + struct gpio_desc *reset_gpio; >> + u8 lvds_link_num_dlanes; >> + bool lvds_dual_link; >> + bool lvds_link12_swap; >> +}; >> + >> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge *bridge) >> +{ >> + return container_of(bridge, struct it6263, bridge); >> +} >> + >> +static inline struct it6263 *connector_to_it6263(struct drm_connector *conn) >> +{ >> + return container_of(conn, struct it6263, connector); >> +} >> + >> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int reg) >> +{ >> + switch (reg) { >> + case HDMI_REG_SW_RST: >> + case HDMI_REG_BANK_CTRL: >> + case HDMI_REG_DDC_MASTER_CTRL: >> + case HDMI_REG_DDC_HEADER: >> + case HDMI_REG_DDC_REQOFF: >> + case HDMI_REG_DDC_REQCOUNT: >> + case HDMI_REG_DDC_EDIDSEG: >> + case HDMI_REG_DDC_CMD: >> + case HDMI_REG_LVDS_PORT: >> + case HDMI_REG_LVDS_PORT_EN: >> + case HDMI_REG_AFE_DRV_CTRL: >> + case HDMI_REG_AFE_XP_CTRL: >> + case HDMI_REG_AFE_ISW_CTRL: >> + case HDMI_REG_AFE_IP_CTRL: >> + case HDMI_REG_INPUT_MODE: >> + case HDMI_REG_HDMI_MODE: >> + case HDMI_REG_GCP: >> + case HDMI_REG_PKT_GENERAL_CTRL: >> + case HDMI_REG_AVI_DB1: >> + case HDMI_REG_AVI_DB2: >> + case HDMI_REG_AVI_DB3: >> + case HDMI_REG_AVI_DB4: >> + case HDMI_REG_AVI_DB5: >> + case HDMI_REG_AVI_CSUM: >> + case HDMI_REG_AVI_DB6: >> + case HDMI_REG_AVI_DB7: >> + case HDMI_REG_AVI_DB8: >> + case HDMI_REG_AVI_DB9: >> + case HDMI_REG_AVI_DB10: >> + case HDMI_REG_AVI_DB11: >> + case HDMI_REG_AVI_DB12: >> + case HDMI_REG_AVI_DB13: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int reg) >> +{ >> + if (it6263_hdmi_writeable_reg(dev, reg)) >> + return true; >> + >> + switch (reg) { >> + case HDMI_REG_SYS_STATUS: >> + case HDMI_REG_DDC_STATUS: >> + case HDMI_REG_DDC_READFIFO: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int reg) >> +{ >> + switch (reg) { >> + case HDMI_REG_SW_RST: >> + case HDMI_REG_SYS_STATUS: >> + case HDMI_REG_DDC_STATUS: >> + case HDMI_REG_DDC_READFIFO: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { >> + .range_min = 0x00, >> + .range_max = HDMI_REG_AVI_DB13, >> + .selector_reg = HDMI_REG_BANK_CTRL, >> + .selector_mask = REG_BANK_SEL, >> + .selector_shift = 0, >> + .window_start = 0x00, >> + .window_len = 0x100, >> +}; >> + >> +static const struct regmap_config it6263_hdmi_regmap_config = { >> + .name = "it6263-hdmi", >> + .reg_bits = 8, >> + .val_bits = 8, >> + .writeable_reg = it6263_hdmi_writeable_reg, >> + .readable_reg = it6263_hdmi_readable_reg, >> + .volatile_reg = it6263_hdmi_volatile_reg, >> + .max_register = HDMI_REG_AVI_DB13, >> + .ranges = &it6263_hdmi_range_cfg, >> + .num_ranges = 1, >> + .cache_type = REGCACHE_MAPLE, >> +}; >> + >> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int reg) >> +{ >> + switch (reg) { >> + case LVDS_REG_05: >> + case LVDS_REG_0B: >> + case LVDS_REG_2C: >> + case LVDS_REG_3C: >> + case LVDS_REG_3F: >> + case LVDS_REG_47: >> + case LVDS_REG_48: >> + case LVDS_REG_4F: >> + case LVDS_REG_52: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int reg) >> +{ >> + return it6263_lvds_writeable_reg(dev, reg); >> +} >> + >> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int reg) >> +{ >> + return reg == LVDS_REG_05; >> +} >> + >> +static const struct regmap_config it6263_lvds_regmap_config = { >> + .name = "it6263-lvds", >> + .reg_bits = 8, >> + .val_bits = 8, >> + .writeable_reg = it6263_lvds_writeable_reg, >> + .readable_reg = it6263_lvds_readable_reg, >> + .volatile_reg = it6263_lvds_volatile_reg, >> + .max_register = LVDS_REG_52, >> + .cache_type = REGCACHE_MAPLE, >> +}; >> + >> +static const char * const it6263_supplies[] = { >> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", >> + "avcc", "anvdd", "apvdd" >> +}; >> + >> +static int it6263_parse_dt(struct it6263 *it) >> +{ >> + struct device *dev = it->dev; >> + struct device_node *port0, *port1; >> + int ret; >> + >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", >> + &it->lvds_link_num_dlanes); >> + if (ret) { >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", >> + ret); >> + return ret; >> + } >> + >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); >> + if (IS_ERR(it->next_bridge)) >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), >> + "failed to get next bridge\n"); >> + >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); >> + if (port0 && port1) { >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { >> + it->lvds_dual_link = true; >> + it->lvds_link12_swap = true; > > This is a nice name for the propery in the Dual Link LVDS case: > > ite,lvds-link-swap Swapping LVDS link1&2 is implied by the dual-lvds-{even,odd}-pixels properties that DT writers specify in port@0 and port@1. The DT writers don't need to use a dedicated property like ite,lvds-link-swap to explicitly indicate the swap. > > >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { >> + it->lvds_dual_link = true; >> + } >> + >> + if (!it->lvds_dual_link) { >> + dev_err(dev, >> + "failed to get LVDS dual link pixel order\n"); >> + ret = -EINVAL; >> + } >> + } else if (port1) { >> + ret = -EINVAL; >> + dev_err(dev, "single input LVDS port1 is not supported\n"); >> + } else if (!port0) { >> + ret = -EINVAL; >> + dev_err(dev, "no input LVDS port\n"); >> + } >> + >> + of_node_put(port0); >> + of_node_put(port1); >> + >> + return ret; >> +} >> + >> +static inline void it6263_hw_reset(struct it6263 *it) >> +{ >> + if (!it->reset_gpio) >> + return; >> + >> + gpiod_set_value_cansleep(it->reset_gpio, 0); >> + fsleep(1000); >> + gpiod_set_value_cansleep(it->reset_gpio, 1); >> + /* The chip maker says the low pulse should be at least 40ms. */ >> + fsleep(40000); >> + gpiod_set_value_cansleep(it->reset_gpio, 0); >> + /* addtional time to wait the high voltage to be stable */ >> + fsleep(5000); >> +} >> + >> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) >> +{ >> + int ret; >> + >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, >> + LVDS_INPUT_CTRL_I2C_ADDR << 1); >> + if (ret) >> + return ret; >> + >> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); >> +} >> + >> +static inline void it6263_lvds_reset(struct it6263 *it) >> +{ >> + /* AFE PLL reset */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); >> + fsleep(1000); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); >> + >> + /* software pixel clock domain reset */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, >> + REG_SOFT_P_RST); >> + fsleep(1000); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); >> + fsleep(10000); >> +} >> + >> +static inline void it6263_lvds_set_interface(struct it6263 *it) >> +{ >> + /* color depth */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); >> + /* output mapping */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); >> + >> + if (it->lvds_dual_link) { >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); >> + } else { >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); >> + } >> +} >> + >> +static inline void it6263_lvds_set_afe(struct it6263 *it) >> +{ >> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); >> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); >> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); >> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); >> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); >> + >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, >> + REG_SSC_PCLK_RF); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, >> + REG_DESSC_ENB); >> +} >> + >> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) >> +{ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, >> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); >> +} >> + >> +static inline void it6263_lvds_config(struct it6263 *it) >> +{ >> + it6263_lvds_reset(it); >> + it6263_lvds_set_interface(it); >> + it6263_lvds_set_afe(it); >> + it6263_lvds_sys_cfg(it); >> +} >> + >> +static inline void it6263_hdmi_config(struct it6263 *it) >> +{ >> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); >> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, >> + HDMI_COLOR_DEPTH_24); >> +} >> + >> +static enum drm_connector_status it6263_detect(struct it6263 *it) >> +{ >> + unsigned int val; >> + >> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); >> + if (val & HPDETECT) >> + return connector_status_connected; >> + else >> + return connector_status_disconnected; >> +} >> + >> +static enum drm_connector_status >> +it6263_connector_detect(struct drm_connector *connector, bool force) >> +{ >> + struct it6263 *it = connector_to_it6263(connector); >> + >> + return it6263_detect(it); >> +} >> + >> +static const struct drm_connector_funcs it6263_connector_funcs = { >> + .detect = it6263_connector_detect, >> + .fill_modes = drm_helper_probe_single_connector_modes, >> + .destroy = drm_connector_cleanup, >> + .reset = drm_atomic_helper_connector_reset, >> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, >> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, >> +}; >> + >> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, size_t len) >> +{ >> + struct it6263 *it = data; >> + struct regmap *regmap = it->hdmi_regmap; >> + unsigned int start = (block % 2) * EDID_LENGTH; >> + unsigned int segment = block >> 1; >> + unsigned int count, val; >> + int ret; >> + >> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); >> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); >> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); >> + >> + while (len) { >> + /* clear DDC FIFO */ >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); >> + >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, >> + val, val & DDC_DONE, >> + 2000, 10000); >> + if (ret) { >> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); >> + return ret; >> + } >> + >> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; >> + >> + /* fire the read command */ >> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); >> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); >> + >> + start += count; >> + len -= count; >> + >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, >> + val & (DDC_DONE | DDC_ERROR), >> + 20000, 250000); >> + if (ret && !(val & DDC_ERROR)) { >> + dev_err(it->dev, "failed to read EDID:%d\n", ret); >> + return ret; >> + } >> + >> + if (val & DDC_ERROR) { >> + dev_err(it->dev, "DDC error\n"); >> + return -EIO; >> + } >> + >> + /* cache to buffer */ >> + for (; count > 0; count--) { >> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); >> + *(buf++) = val; >> + } >> + } >> + >> + return 0; >> +} >> + >> +static int it6263_connector_get_modes(struct drm_connector *connector) >> +{ >> + struct it6263 *it = connector_to_it6263(connector); >> + const struct drm_edid *drm_edid; >> + int count; >> + >> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); >> + >> + drm_edid_connector_update(connector, drm_edid); >> + count = drm_edid_connector_add_modes(connector); >> + >> + drm_edid_free(drm_edid); >> + >> + return count; >> +} >> + >> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { >> + .get_modes = it6263_connector_get_modes, >> +}; >> + >> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, >> + struct drm_bridge_state *bridge_state, >> + struct drm_crtc_state *crtc_state, >> + struct drm_connector_state *conn_state) >> +{ >> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > Use drm_atomic_helper_connector_hdmi_check(). Will take a look at this. > > Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual Will take a look at this. > link LVDS have different max clock rates. Please correct me if I'm > wrong. Yes, I think so too. But, I don't know the exact max clock rates. IT6263 data sheet only says LVDS RX supports clock rate up to 150MHz. > >> + >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; >> +} >> + >> +static void >> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, >> + struct drm_bridge_state *old_bridge_state) >> +{ >> + struct it6263 *it = bridge_to_it6263(bridge); >> + >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); >> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); >> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, >> + AFE_DRV_RST | AFE_DRV_PWD); >> +} >> + >> +static void >> +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, >> + struct drm_connector *connector, >> + const struct drm_display_mode *mode) > > -> .hdmi_write_infoframe() , .hdmi_clear_infoframe(). Will take a look at them. > >> +{ >> + struct hdmi_avi_infoframe frame; >> + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; >> + int ret; >> + >> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); >> + if (ret) { >> + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); >> + return; >> + } >> + >> + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); >> + if (ret < 0) { >> + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); >> + return; >> + } >> + >> + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, >> + &buf[HDMI_INFOFRAME_HEADER_SIZE], >> + HDMI_AVI_DB_CHUNK1_SIZE); >> + if (ret) { >> + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", >> + ret); >> + return; >> + } >> + >> + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, >> + &buf[HDMI_INFOFRAME_HEADER_SIZE + >> + HDMI_AVI_DB_CHUNK1_SIZE], >> + HDMI_AVI_DB_CHUNK2_SIZE); >> + if (ret) { >> + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", >> + ret); >> + return; >> + } >> + >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); >> + if (ret) >> + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", >> + ret); >> +} >> + >> +static void >> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, >> + struct drm_bridge_state *old_bridge_state) >> +{ >> + struct drm_atomic_state *state = old_bridge_state->base.state; >> + struct it6263 *it = bridge_to_it6263(bridge); >> + const struct drm_crtc_state *crtc_state; >> + struct regmap *regmap = it->hdmi_regmap; >> + const struct drm_display_mode *mode; >> + struct drm_connector *connector; >> + bool is_stable = false; >> + struct drm_crtc *crtc; >> + unsigned int val; >> + bool pclk_high; >> + int i, ret; >> + >> + connector = drm_atomic_get_new_connector_for_encoder(state, >> + bridge->encoder); >> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; >> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); >> + mode = &crtc_state->adjusted_mode; >> + >> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); >> + >> + it6263_hdmi_avi_infoframe_configure(it, connector, mode); > > drm_atomic_helper_connector_hdmi_update_infoframes Will take a look at this. > >> + >> + /* HDMI AFE setup */ >> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); >> + if (pclk_high) >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, >> + AFE_XP_GAINBIT | AFE_XP_RESETB); >> + else >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, >> + AFE_XP_ER0 | AFE_XP_RESETB); >> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); >> + if (pclk_high) >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, >> + AFE_IP_GAINBIT | AFE_IP_RESETB); >> + else >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, >> + AFE_IP_ER0 | AFE_IP_RESETB); >> + >> + /* HDMI software video reset */ >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); >> + fsleep(1000); >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); >> + >> + /* reconfigure LVDS and retry several times in case video is instable */ >> + for (i = 0; i < 3; i++) { >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, >> + val & TXVIDSTABLE, >> + 20000, 500000); >> + if (!ret) { >> + is_stable = true; >> + break; >> + } >> + >> + it6263_lvds_config(it); >> + } >> + >> + if (!is_stable) >> + dev_warn(it->dev, "failed to wait for video stable\n"); >> + >> + /* HDMI AFE reset release and power up */ >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); >> + >> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); >> + >> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | REPEAT_PKT); >> +} >> + >> +static enum drm_mode_status >> +it6263_bridge_mode_valid(struct drm_bridge *bridge, >> + const struct drm_display_info *info, >> + const struct drm_display_mode *mode) >> +{ >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; > > rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB); > return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, rate); Will look into the two lines. > >> +} >> + >> +static int it6263_bridge_attach(struct drm_bridge *bridge, >> + enum drm_bridge_attach_flags flags) >> +{ >> + struct it6263 *it = bridge_to_it6263(bridge); >> + int ret; >> + >> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, >> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); >> + if (ret < 0) >> + return ret; >> + >> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) >> + return 0; >> + >> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | >> + DRM_CONNECTOR_POLL_DISCONNECT; >> + > > Please strongly consider dropping this and using drm_bridge_connector in > the host driver. I can't afford to make i.MX8MP imx-lcdif KMS use drm_bridge_connector currently. Maybe the Renesas RZ/G3E SMARC EVK Biju tested v1 patch set with is also not using drm_bridge_connector. I hope we can leave it as-is for now. > >> + ret = drm_connector_init(bridge->dev, &it->connector, >> + &it6263_connector_funcs, >> + DRM_MODE_CONNECTOR_HDMIA); >> + if (ret) >> + return ret; >> + >> + drm_connector_helper_add(&it->connector, >> + &it6263_connector_helper_funcs); >> + drm_connector_attach_encoder(&it->connector, bridge->encoder); >> + >> + return 0; >> +} >> + >> +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge *bridge) >> +{ >> + struct it6263 *it = bridge_to_it6263(bridge); >> + >> + return it6263_detect(it); >> +} >> + >> +static const struct drm_edid * >> +it6263_bridge_edid_read(struct drm_bridge *bridge, >> + struct drm_connector *connector) >> +{ >> + struct it6263 *it = bridge_to_it6263(bridge); >> + >> + return drm_edid_read_custom(connector, it6263_read_edid, it); >> +} >> + >> +static u32 * >> +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, >> + struct drm_bridge_state *bridge_state, >> + struct drm_crtc_state *crtc_state, >> + struct drm_connector_state *conn_state, >> + u32 output_fmt, >> + unsigned int *num_input_fmts) >> +{ >> + struct it6263 *it = bridge_to_it6263(bridge); >> + u32 *input_fmts; >> + >> + *num_input_fmts = 0; >> + >> + if (it->lvds_link_num_dlanes == 3) >> + return NULL; >> + >> + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); >> + if (!input_fmts) >> + return NULL; >> + >> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; >> + *num_input_fmts = 1; >> + >> + return input_fmts; >> +} >> + >> +static const struct drm_bridge_funcs it6263_bridge_funcs = { >> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, >> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, >> + .atomic_reset = drm_atomic_helper_bridge_reset, >> + .attach = it6263_bridge_attach, >> + .mode_valid = it6263_bridge_mode_valid, >> + .atomic_disable = it6263_bridge_atomic_disable, >> + .atomic_enable = it6263_bridge_atomic_enable, >> + .atomic_check = it6263_bridge_atomic_check, >> + .detect = it6263_bridge_detect, >> + .edid_read = it6263_bridge_edid_read, >> + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, >> +}; >> + >> +static int it6263_probe(struct i2c_client *client) >> +{ >> + struct device *dev = &client->dev; >> + struct it6263 *it; >> + int ret; >> + >> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); >> + if (!it) >> + return -ENOMEM; >> + >> + it->dev = dev; >> + it->hdmi_i2c = client; >> + >> + it->hdmi_regmap = devm_regmap_init_i2c(client, >> + &it6263_hdmi_regmap_config); >> + if (IS_ERR(it->hdmi_regmap)) >> + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), >> + "failed to init I2C regmap for HDMI\n"); >> + >> + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); >> + if (IS_ERR(it->reset_gpio)) >> + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), >> + "failed to get reset gpio\n"); >> + >> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), >> + it6263_supplies); >> + if (ret) >> + return dev_err_probe(dev, ret, "failed to get power supplies\n"); >> + >> + ret = it6263_parse_dt(it); >> + if (ret) >> + return ret; >> + >> + it6263_hw_reset(it); >> + >> + ret = it6263_lvds_set_i2c_addr(it); >> + if (ret) >> + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); >> + >> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, >> + LVDS_INPUT_CTRL_I2C_ADDR); >> + if (IS_ERR(it->lvds_i2c)) >> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), >> + "failed to allocate I2C device for LVDS\n"); >> + >> + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, >> + &it6263_lvds_regmap_config); >> + if (IS_ERR(it->lvds_regmap)) >> + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), >> + "failed to init I2C regmap for LVDS\n"); >> + >> + it6263_lvds_config(it); >> + it6263_hdmi_config(it); >> + >> + i2c_set_clientdata(client, it); >> + >> + it->bridge.funcs = &it6263_bridge_funcs; >> + it->bridge.of_node = dev->of_node; >> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > > | DRM_BRIDGE_OP_HDMI Will take a look at this. > > BTW: No HPD IRQ support? IT6263 chip doesn't support HPD IRQ. > >> + it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; >> + drm_bridge_add(&it->bridge); > > devm_drm_bridge_add() Will try to use this. Thanks. > >> + >> + return 0; >> +} >> + >> +static void it6263_remove(struct i2c_client *client) >> +{ >> + struct it6263 *it = i2c_get_clientdata(client); >> + >> + drm_bridge_remove(&it->bridge); > > Remove, it becomes unused with the devm_ function. > >> +} >> + >> +static const struct of_device_id it6263_of_match[] = { >> + { .compatible = "ite,it6263", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, it6263_of_match); >> + >> +static const struct i2c_device_id it6263_i2c_ids[] = { >> + { "it6263", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); >> + >> +static struct i2c_driver it6263_driver = { >> + .probe = it6263_probe, >> + .remove = it6263_remove, >> + .driver = { >> + .name = "it6263", >> + .of_match_table = it6263_of_match, >> + }, >> + .id_table = it6263_i2c_ids, >> +}; >> +module_i2c_driver(it6263_driver); >> + >> +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); >> +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); >> +MODULE_LICENSE("GPL"); >> -- >> 2.34.1 >> >
Hi Dmitry Baryshkov, > -----Original Message----- > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Sent: Saturday, October 12, 2024 9:45 AM > Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > > Add basic HDMI video output support. Currently, only RGB888 output > > pixel format is supported. At the LVDS input side, the driver > > supports single LVDS link and dual LVDS links with "jeida-24" LVDS > > mapping. > > > > Product link: > > https://www.ite.com.tw/en/product/cate1/IT6263 > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > v2: > > * Add AVI inforframe support. (Maxime) > > Maxime asked to wire up the HDMI Connector framework. I have pushed the patch that converts lt9611.c > driver. Please implement similar changes in your driver. > > > * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > > * Rename it6263_reset() to it6263_hw_reset(). (Biju) > > * Check number of LVDS link data lanes. (Biju) > > > > drivers/gpu/drm/bridge/Kconfig | 8 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/ite-it6263.c | 919 > > ++++++++++++++++++++++++++++ > > 3 files changed, 928 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig > > b/drivers/gpu/drm/bridge/Kconfig index 3eb955333c80..93f99682a090 > > 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -90,6 +90,14 @@ config DRM_FSL_LDB > > help > > Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > > > +config DRM_ITE_IT6263 > > + tristate "ITE IT6263 LVDS/HDMI bridge" > > + depends on OF > > + select DRM_KMS_HELPER > > + select REGMAP_I2C > > + help > > + ITE IT6263 LVDS to HDMI bridge chip driver. > > + > > config DRM_ITE_IT6505 > > tristate "ITE IT6505 DisplayPort bridge" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile > > b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd > > 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > > +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > > obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > > obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git > > a/drivers/gpu/drm/bridge/ite-it6263.c > > b/drivers/gpu/drm/bridge/ite-it6263.c > > new file mode 100644 > > index 000000000000..9b3318792f15 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/ite-it6263.c > > @@ -0,0 +1,919 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright 2024 NXP > > + */ > > + > > +#include <linux/bitfield.h> > > +#include <linux/bits.h> > > +#include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/hdmi.h> > > +#include <linux/i2c.h> > > +#include <linux/media-bus-format.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/regmap.h> > > +#include <linux/regulator/consumer.h> > > + > > +#include <drm/drm_atomic.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > > +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > > +<drm/drm_edid.h> #include <drm/drm_of.h> #include > > +<drm/drm_probe_helper.h> > > + > > +/* > > +--------------------------------------------------------------------- > > +-------- > > + * LVDS registers > > + */ > > + > > +/* LVDS software reset registers */ > > +#define LVDS_REG_05 0x05 > > +#define REG_SOFT_P_RST BIT(1) > > + > > +/* LVDS system configuration registers */ > > +/* 0x0b */ > > +#define LVDS_REG_0B 0x0b > > +#define REG_SSC_PCLK_RF BIT(0) > > +#define REG_LVDS_IN_SWAP BIT(1) > > + > > +/* LVDS test pattern gen control registers */ > > +/* 0x2c */ > > +#define LVDS_REG_2C 0x2c > > +#define REG_COL_DEP GENMASK(1, 0) > > +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > > +#define OUT_MAP BIT(4) > > +#define JEIDA 0 > > +#define REG_DESSC_ENB BIT(6) > > +#define DMODE BIT(7) > > +#define DISO BIT(7) > > +#define SISO 0 > > + > > +#define LVDS_REG_3C 0x3c > > +#define LVDS_REG_3F 0x3f > > +#define LVDS_REG_47 0x47 > > +#define LVDS_REG_48 0x48 > > +#define LVDS_REG_4F 0x4f > > +#define LVDS_REG_52 0x52 > > + > > +/* > > +--------------------------------------------------------------------- > > +-------- > > + * HDMI registers are separated into three banks: > > + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > > + > > +/* HDMI genernal registers */ > > +#define HDMI_REG_SW_RST 0x04 > > +#define SOFTREF_RST BIT(5) > > +#define SOFTA_RST BIT(4) > > +#define SOFTV_RST BIT(3) > > +#define AUD_RST BIT(2) > > +#define HDCP_RST BIT(0) > > +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > > + AUD_RST | HDCP_RST) > > + > > +#define HDMI_REG_SYS_STATUS 0x0e > > +#define HPDETECT BIT(6) > > +#define TXVIDSTABLE BIT(4) > > + > > +#define HDMI_REG_BANK_CTRL 0x0f > > +#define REG_BANK_SEL BIT(0) > > + > > +/* HDMI System DDC control registers */ > > +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > > +#define MASTER_SEL_HOST BIT(0) > > + > > +#define HDMI_REG_DDC_HEADER 0x11 > > + > > +#define HDMI_REG_DDC_REQOFF 0x12 > > +#define HDMI_REG_DDC_REQCOUNT 0x13 > > +#define HDMI_REG_DDC_EDIDSEG 0x14 > > + > > +#define HDMI_REG_DDC_CMD 0x15 > > +#define DDC_CMD_EDID_READ 0x3 > > +#define DDC_CMD_FIFO_CLR 0x9 > > + > > +#define HDMI_REG_DDC_STATUS 0x16 > > +#define DDC_DONE BIT(7) > > +#define DDC_NOACK BIT(5) > > +#define DDC_WAITBUS BIT(4) > > +#define DDC_ARBILOSE BIT(3) > > +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > > + > > +#define HDMI_DDC_FIFO_BYTES 32 > > +#define HDMI_REG_DDC_READFIFO 0x17 > > +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > > +#define HDMI_REG_LVDS_PORT_EN 0x1e > > +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > > + > > +/* > > +--------------------------------------------------------------------- > > +-------- > > + * 2) HDMI register bank0: 0x30 ~ 0xff */ > > + > > +/* HDMI AFE registers */ > > +#define HDMI_REG_AFE_DRV_CTRL 0x61 > > +#define AFE_DRV_PWD BIT(5) > > +#define AFE_DRV_RST BIT(4) > > + > > +#define HDMI_REG_AFE_XP_CTRL 0x62 > > +#define AFE_XP_GAINBIT BIT(7) > > +#define AFE_XP_ER0 BIT(4) > > +#define AFE_XP_RESETB BIT(3) > > + > > +#define HDMI_REG_AFE_ISW_CTRL 0x63 > > + > > +#define HDMI_REG_AFE_IP_CTRL 0x64 > > +#define AFE_IP_GAINBIT BIT(7) > > +#define AFE_IP_ER0 BIT(3) > > +#define AFE_IP_RESETB BIT(2) > > + > > +/* HDMI input data format registers */ > > +#define HDMI_REG_INPUT_MODE 0x70 > > +#define IN_RGB 0x00 > > + > > +/* HDMI general control registers */ > > +#define HDMI_REG_HDMI_MODE 0xc0 > > +#define TX_HDMI_MODE BIT(0) > > + > > +#define HDMI_REG_GCP 0xc1 > > +#define AVMUTE BIT(0) > > +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > > +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > > + > > +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > > +#define ENABLE_PKT BIT(0) > > +#define REPEAT_PKT BIT(1) > > + > > +/* > > +--------------------------------------------------------------------- > > +-------- > > + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > > + > > +/* AVI packet registers */ > > +#define HDMI_REG_AVI_DB1 0x158 > > +#define HDMI_REG_AVI_DB2 0x159 > > +#define HDMI_REG_AVI_DB3 0x15a > > +#define HDMI_REG_AVI_DB4 0x15b > > +#define HDMI_REG_AVI_DB5 0x15c > > +#define HDMI_REG_AVI_CSUM 0x15d > > +#define HDMI_REG_AVI_DB6 0x15e > > +#define HDMI_REG_AVI_DB7 0x15f > > +#define HDMI_REG_AVI_DB8 0x160 > > +#define HDMI_REG_AVI_DB9 0x161 > > +#define HDMI_REG_AVI_DB10 0x162 > > +#define HDMI_REG_AVI_DB11 0x163 > > +#define HDMI_REG_AVI_DB12 0x164 > > +#define HDMI_REG_AVI_DB13 0x165 > > + > > +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) > > +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) > > + > > +#define MAX_PIXEL_CLOCK_KHZ 150000 > > +#define HIGH_PIXEL_CLOCK_KHZ 80000 > > + > > +struct it6263 { > > + struct device *dev; > > + struct i2c_client *hdmi_i2c; > > + struct i2c_client *lvds_i2c; > > + struct regmap *hdmi_regmap; > > + struct regmap *lvds_regmap; > > + struct drm_bridge bridge; > > + struct drm_bridge *next_bridge; > > + struct drm_connector connector; > > + struct gpio_desc *reset_gpio; > > + u8 lvds_link_num_dlanes; > > + bool lvds_dual_link; > > + bool lvds_link12_swap; > > +}; > > + > > +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > > +*bridge) { > > + return container_of(bridge, struct it6263, bridge); } > > + > > +static inline struct it6263 *connector_to_it6263(struct drm_connector > > +*conn) { > > + return container_of(conn, struct it6263, connector); } > > + > > +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned > > +int reg) { > > + switch (reg) { > > + case HDMI_REG_SW_RST: > > + case HDMI_REG_BANK_CTRL: > > + case HDMI_REG_DDC_MASTER_CTRL: > > + case HDMI_REG_DDC_HEADER: > > + case HDMI_REG_DDC_REQOFF: > > + case HDMI_REG_DDC_REQCOUNT: > > + case HDMI_REG_DDC_EDIDSEG: > > + case HDMI_REG_DDC_CMD: > > + case HDMI_REG_LVDS_PORT: > > + case HDMI_REG_LVDS_PORT_EN: > > + case HDMI_REG_AFE_DRV_CTRL: > > + case HDMI_REG_AFE_XP_CTRL: > > + case HDMI_REG_AFE_ISW_CTRL: > > + case HDMI_REG_AFE_IP_CTRL: > > + case HDMI_REG_INPUT_MODE: > > + case HDMI_REG_HDMI_MODE: > > + case HDMI_REG_GCP: > > + case HDMI_REG_PKT_GENERAL_CTRL: > > + case HDMI_REG_AVI_DB1: > > + case HDMI_REG_AVI_DB2: > > + case HDMI_REG_AVI_DB3: > > + case HDMI_REG_AVI_DB4: > > + case HDMI_REG_AVI_DB5: > > + case HDMI_REG_AVI_CSUM: > > + case HDMI_REG_AVI_DB6: > > + case HDMI_REG_AVI_DB7: > > + case HDMI_REG_AVI_DB8: > > + case HDMI_REG_AVI_DB9: > > + case HDMI_REG_AVI_DB10: > > + case HDMI_REG_AVI_DB11: > > + case HDMI_REG_AVI_DB12: > > + case HDMI_REG_AVI_DB13: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int > > +reg) { > > + if (it6263_hdmi_writeable_reg(dev, reg)) > > + return true; > > + > > + switch (reg) { > > + case HDMI_REG_SYS_STATUS: > > + case HDMI_REG_DDC_STATUS: > > + case HDMI_REG_DDC_READFIFO: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int > > +reg) { > > + switch (reg) { > > + case HDMI_REG_SW_RST: > > + case HDMI_REG_SYS_STATUS: > > + case HDMI_REG_DDC_STATUS: > > + case HDMI_REG_DDC_READFIFO: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > > + .range_min = 0x00, > > + .range_max = HDMI_REG_AVI_DB13, > > + .selector_reg = HDMI_REG_BANK_CTRL, > > + .selector_mask = REG_BANK_SEL, > > + .selector_shift = 0, > > + .window_start = 0x00, > > + .window_len = 0x100, > > +}; > > + > > +static const struct regmap_config it6263_hdmi_regmap_config = { > > + .name = "it6263-hdmi", > > + .reg_bits = 8, > > + .val_bits = 8, > > + .writeable_reg = it6263_hdmi_writeable_reg, > > + .readable_reg = it6263_hdmi_readable_reg, > > + .volatile_reg = it6263_hdmi_volatile_reg, > > + .max_register = HDMI_REG_AVI_DB13, > > + .ranges = &it6263_hdmi_range_cfg, > > + .num_ranges = 1, > > + .cache_type = REGCACHE_MAPLE, > > +}; > > + > > +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned > > +int reg) { > > + switch (reg) { > > + case LVDS_REG_05: > > + case LVDS_REG_0B: > > + case LVDS_REG_2C: > > + case LVDS_REG_3C: > > + case LVDS_REG_3F: > > + case LVDS_REG_47: > > + case LVDS_REG_48: > > + case LVDS_REG_4F: > > + case LVDS_REG_52: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int > > +reg) { > > + return it6263_lvds_writeable_reg(dev, reg); } > > + > > +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int > > +reg) { > > + return reg == LVDS_REG_05; > > +} > > + > > +static const struct regmap_config it6263_lvds_regmap_config = { > > + .name = "it6263-lvds", > > + .reg_bits = 8, > > + .val_bits = 8, > > + .writeable_reg = it6263_lvds_writeable_reg, > > + .readable_reg = it6263_lvds_readable_reg, > > + .volatile_reg = it6263_lvds_volatile_reg, > > + .max_register = LVDS_REG_52, > > + .cache_type = REGCACHE_MAPLE, > > +}; > > + > > +static const char * const it6263_supplies[] = { > > + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > > + "avcc", "anvdd", "apvdd" > > +}; > > + > > +static int it6263_parse_dt(struct it6263 *it) { > > + struct device *dev = it->dev; > > + struct device_node *port0, *port1; > > + int ret; > > + > > + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > > + &it->lvds_link_num_dlanes); > > + if (ret) { > > + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > > + ret); > > + return ret; > > + } > > + > > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > > + if (IS_ERR(it->next_bridge)) > > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > > + "failed to get next bridge\n"); > > + > > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > > + if (port0 && port1) { > > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > > + it->lvds_dual_link = true; > > + it->lvds_link12_swap = true; > > This is a nice name for the propery in the Dual Link LVDS case: > > ite,lvds-link-swap > > > > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > > + it->lvds_dual_link = true; > > + } > > + > > + if (!it->lvds_dual_link) { > > + dev_err(dev, > > + "failed to get LVDS dual link pixel order\n"); > > + ret = -EINVAL; > > + } > > + } else if (port1) { > > + ret = -EINVAL; > > + dev_err(dev, "single input LVDS port1 is not supported\n"); > > + } else if (!port0) { > > + ret = -EINVAL; > > + dev_err(dev, "no input LVDS port\n"); > > + } > > + > > + of_node_put(port0); > > + of_node_put(port1); > > + > > + return ret; > > +} > > + > > +static inline void it6263_hw_reset(struct it6263 *it) { > > + if (!it->reset_gpio) > > + return; > > + > > + gpiod_set_value_cansleep(it->reset_gpio, 0); > > + fsleep(1000); > > + gpiod_set_value_cansleep(it->reset_gpio, 1); > > + /* The chip maker says the low pulse should be at least 40ms. */ > > + fsleep(40000); > > + gpiod_set_value_cansleep(it->reset_gpio, 0); > > + /* addtional time to wait the high voltage to be stable */ > > + fsleep(5000); > > +} > > + > > +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > > + int ret; > > + > > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > > + LVDS_INPUT_CTRL_I2C_ADDR << 1); > > + if (ret) > > + return ret; > > + > > + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); > > +} > > + > > +static inline void it6263_lvds_reset(struct it6263 *it) { > > + /* AFE PLL reset */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > > + fsleep(1000); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > > + > > + /* software pixel clock domain reset */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > > + REG_SOFT_P_RST); > > + fsleep(1000); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > > + fsleep(10000); > > +} > > + > > +static inline void it6263_lvds_set_interface(struct it6263 *it) { > > + /* color depth */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > > + /* output mapping */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > > + > > + if (it->lvds_dual_link) { > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > > + } else { > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > > + } > > +} > > + > > +static inline void it6263_lvds_set_afe(struct it6263 *it) { > > + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > > + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > > + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > > + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > > + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > > + > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > > + REG_SSC_PCLK_RF); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > > + REG_DESSC_ENB); > > +} > > + > > +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > > + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > > + > > +static inline void it6263_lvds_config(struct it6263 *it) { > > + it6263_lvds_reset(it); > > + it6263_lvds_set_interface(it); > > + it6263_lvds_set_afe(it); > > + it6263_lvds_sys_cfg(it); > > +} > > + > > +static inline void it6263_hdmi_config(struct it6263 *it) { > > + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > > + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > > + HDMI_COLOR_DEPTH_24); > > +} > > + > > +static enum drm_connector_status it6263_detect(struct it6263 *it) { > > + unsigned int val; > > + > > + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > > + if (val & HPDETECT) > > + return connector_status_connected; > > + else > > + return connector_status_disconnected; } > > + > > +static enum drm_connector_status > > +it6263_connector_detect(struct drm_connector *connector, bool force) > > +{ > > + struct it6263 *it = connector_to_it6263(connector); > > + > > + return it6263_detect(it); > > +} > > + > > +static const struct drm_connector_funcs it6263_connector_funcs = { > > + .detect = it6263_connector_detect, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .destroy = drm_connector_cleanup, > > + .reset = drm_atomic_helper_connector_reset, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > > +size_t len) { > > + struct it6263 *it = data; > > + struct regmap *regmap = it->hdmi_regmap; > > + unsigned int start = (block % 2) * EDID_LENGTH; > > + unsigned int segment = block >> 1; > > + unsigned int count, val; > > + int ret; > > + > > + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > > + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > > + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > > + > > + while (len) { > > + /* clear DDC FIFO */ > > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > > + > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > > + val, val & DDC_DONE, > > + 2000, 10000); > > + if (ret) { > > + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > > + return ret; > > + } > > + > > + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > > + > > + /* fire the read command */ > > + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > > + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > > + > > + start += count; > > + len -= count; > > + > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > > + val & (DDC_DONE | DDC_ERROR), > > + 20000, 250000); > > + if (ret && !(val & DDC_ERROR)) { > > + dev_err(it->dev, "failed to read EDID:%d\n", ret); > > + return ret; > > + } > > + > > + if (val & DDC_ERROR) { > > + dev_err(it->dev, "DDC error\n"); > > + return -EIO; > > + } > > + > > + /* cache to buffer */ > > + for (; count > 0; count--) { > > + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > > + *(buf++) = val; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static int it6263_connector_get_modes(struct drm_connector > > +*connector) { > > + struct it6263 *it = connector_to_it6263(connector); > > + const struct drm_edid *drm_edid; > > + int count; > > + > > + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > > + > > + drm_edid_connector_update(connector, drm_edid); > > + count = drm_edid_connector_add_modes(connector); > > + > > + drm_edid_free(drm_edid); > > + > > + return count; > > +} > > + > > +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > > + .get_modes = it6263_connector_get_modes, }; > > + > > +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state) { > > + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > Use drm_atomic_helper_connector_hdmi_check(). > > Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual link LVDS have different max > clock rates. Please correct me if I'm wrong. I guess this rate will be same for both links in dual lvds mode. For single link, it supports only link0. We cannot operate link1 its Own. From ITE point the max rate is rate corresponding to 1080p(148-150MHz) single and dual link LVDS have different max clock rates, but that constraint is in SoC side?? ITE HW manual does not mention about this. > > > + > > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > > + > > +static void > > +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > > + struct drm_bridge_state *old_bridge_state) { > > + struct it6263 *it = bridge_to_it6263(bridge); > > + > > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > > + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > > + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > > + AFE_DRV_RST | AFE_DRV_PWD); > > +} > > + > > +static void > > +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, > > + struct drm_connector *connector, > > + const struct drm_display_mode *mode) > > -> .hdmi_write_infoframe() , .hdmi_clear_infoframe(). > > > +{ > > + struct hdmi_avi_infoframe frame; > > + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; > > + int ret; > > + > > + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); > > + if (ret) { > > + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); > > + return; > > + } > > + > > + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); > > + if (ret < 0) { > > + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); > > + return; > > + } > > + > > + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ > > + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, > > + &buf[HDMI_INFOFRAME_HEADER_SIZE], > > + HDMI_AVI_DB_CHUNK1_SIZE); > > + if (ret) { > > + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", > > + ret); > > + return; > > + } > > + > > + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ > > + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, > > + &buf[HDMI_INFOFRAME_HEADER_SIZE + > > + HDMI_AVI_DB_CHUNK1_SIZE], > > + HDMI_AVI_DB_CHUNK2_SIZE); > > + if (ret) { > > + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", > > + ret); > > + return; > > + } > > + > > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); > > + if (ret) > > + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", > > + ret); > > +} > > + > > +static void > > +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > > + struct drm_bridge_state *old_bridge_state) { > > + struct drm_atomic_state *state = old_bridge_state->base.state; > > + struct it6263 *it = bridge_to_it6263(bridge); > > + const struct drm_crtc_state *crtc_state; > > + struct regmap *regmap = it->hdmi_regmap; > > + const struct drm_display_mode *mode; > > + struct drm_connector *connector; > > + bool is_stable = false; > > + struct drm_crtc *crtc; > > + unsigned int val; > > + bool pclk_high; > > + int i, ret; > > + > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > + bridge->encoder); > > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > > + mode = &crtc_state->adjusted_mode; > > + > > + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > > + > > + it6263_hdmi_avi_infoframe_configure(it, connector, mode); > > drm_atomic_helper_connector_hdmi_update_infoframes > > > + > > + /* HDMI AFE setup */ > > + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > > + if (pclk_high) > > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > > + AFE_XP_GAINBIT | AFE_XP_RESETB); > > + else > > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > > + AFE_XP_ER0 | AFE_XP_RESETB); > > + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > > + if (pclk_high) > > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > > + AFE_IP_GAINBIT | AFE_IP_RESETB); > > + else > > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > > + AFE_IP_ER0 | AFE_IP_RESETB); > > + > > + /* HDMI software video reset */ > > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > > + fsleep(1000); > > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > > + > > + /* reconfigure LVDS and retry several times in case video is instable */ > > + for (i = 0; i < 3; i++) { > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > > + val & TXVIDSTABLE, > > + 20000, 500000); > > + if (!ret) { > > + is_stable = true; > > + break; > > + } > > + > > + it6263_lvds_config(it); > > + } > > + > > + if (!is_stable) > > + dev_warn(it->dev, "failed to wait for video stable\n"); > > + > > + /* HDMI AFE reset release and power up */ > > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > > + > > + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > > + > > + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > > +REPEAT_PKT); } > > + > > +static enum drm_mode_status > > +it6263_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_info *info, > > + const struct drm_display_mode *mode) { > > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : > > +MODE_OK; > > rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB); > return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, rate); > > > +} > > + > > +static int it6263_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) { > > + struct it6263 *it = bridge_to_it6263(bridge); > > + int ret; > > + > > + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > > + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > + if (ret < 0) > > + return ret; > > + > > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > + return 0; > > + > > + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > > + DRM_CONNECTOR_POLL_DISCONNECT; > > + > > Please strongly consider dropping this and using drm_bridge_connector in the host driver. > > > + ret = drm_connector_init(bridge->dev, &it->connector, > > + &it6263_connector_funcs, > > + DRM_MODE_CONNECTOR_HDMIA); > > + if (ret) > > + return ret; > > + > > + drm_connector_helper_add(&it->connector, > > + &it6263_connector_helper_funcs); > > + drm_connector_attach_encoder(&it->connector, bridge->encoder); > > + > > + return 0; > > +} > > + > > +static enum drm_connector_status it6263_bridge_detect(struct > > +drm_bridge *bridge) { > > + struct it6263 *it = bridge_to_it6263(bridge); > > + > > + return it6263_detect(it); > > +} > > + > > +static const struct drm_edid * > > +it6263_bridge_edid_read(struct drm_bridge *bridge, > > + struct drm_connector *connector) > > +{ > > + struct it6263 *it = bridge_to_it6263(bridge); > > + > > + return drm_edid_read_custom(connector, it6263_read_edid, it); } > > + > > +static u32 * > > +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state, > > + u32 output_fmt, > > + unsigned int *num_input_fmts) > > +{ > > + struct it6263 *it = bridge_to_it6263(bridge); > > + u32 *input_fmts; > > + > > + *num_input_fmts = 0; > > + > > + if (it->lvds_link_num_dlanes == 3) > > + return NULL; > > + > > + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > > + if (!input_fmts) > > + return NULL; > > + > > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > > + *num_input_fmts = 1; > > + > > + return input_fmts; > > +} > > + > > +static const struct drm_bridge_funcs it6263_bridge_funcs = { > > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > > + .atomic_reset = drm_atomic_helper_bridge_reset, > > + .attach = it6263_bridge_attach, > > + .mode_valid = it6263_bridge_mode_valid, > > + .atomic_disable = it6263_bridge_atomic_disable, > > + .atomic_enable = it6263_bridge_atomic_enable, > > + .atomic_check = it6263_bridge_atomic_check, > > + .detect = it6263_bridge_detect, > > + .edid_read = it6263_bridge_edid_read, > > + .atomic_get_input_bus_fmts = > > +it6263_bridge_atomic_get_input_bus_fmts, > > +}; > > + > > +static int it6263_probe(struct i2c_client *client) { > > + struct device *dev = &client->dev; > > + struct it6263 *it; > > + int ret; > > + > > + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > > + if (!it) > > + return -ENOMEM; > > + > > + it->dev = dev; > > + it->hdmi_i2c = client; > > + > > + it->hdmi_regmap = devm_regmap_init_i2c(client, > > + &it6263_hdmi_regmap_config); > > + if (IS_ERR(it->hdmi_regmap)) > > + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > > + "failed to init I2C regmap for HDMI\n"); > > + > > + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > > + if (IS_ERR(it->reset_gpio)) > > + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > > + "failed to get reset gpio\n"); > > + > > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > > + it6263_supplies); > > + if (ret) > > + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > > + > > + ret = it6263_parse_dt(it); > > + if (ret) > > + return ret; > > + > > + it6263_hw_reset(it); > > + > > + ret = it6263_lvds_set_i2c_addr(it); > > + if (ret) > > + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > > + > > + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > > + LVDS_INPUT_CTRL_I2C_ADDR); > > + if (IS_ERR(it->lvds_i2c)) > > + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > > + "failed to allocate I2C device for LVDS\n"); > > + > > + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > > + &it6263_lvds_regmap_config); > > + if (IS_ERR(it->lvds_regmap)) > > + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > > + "failed to init I2C regmap for LVDS\n"); > > + > > + it6263_lvds_config(it); > > + it6263_hdmi_config(it); > > + > > + i2c_set_clientdata(client, it); > > + > > + it->bridge.funcs = &it6263_bridge_funcs; > > + it->bridge.of_node = dev->of_node; > > + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > > | DRM_BRIDGE_OP_HDMI > > BTW: No HPD IRQ support? Renesas SMARC RZ/G3E this signal is internal. No dedicted IRQ line Populated for this signal. I don't know about NXP and any other platforms has HPD wired to test the HPD IRQ support. Maybe go with poll method now and add hot plug support, when we have platform with HPD to test. Cheers, Biju > > > + it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; > > + drm_bridge_add(&it->bridge); > > devm_drm_bridge_add() > > > + > > + return 0; > > +} > > + > > +static void it6263_remove(struct i2c_client *client) { > > + struct it6263 *it = i2c_get_clientdata(client); > > + > > + drm_bridge_remove(&it->bridge); > > Remove, it becomes unused with the devm_ function. > > > +} > > + > > +static const struct of_device_id it6263_of_match[] = { > > + { .compatible = "ite,it6263", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, it6263_of_match); > > + > > +static const struct i2c_device_id it6263_i2c_ids[] = { > > + { "it6263", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > > + > > +static struct i2c_driver it6263_driver = { > > + .probe = it6263_probe, > > + .remove = it6263_remove, > > + .driver = { > > + .name = "it6263", > > + .of_match_table = it6263_of_match, > > + }, > > + .id_table = it6263_i2c_ids, > > +}; > > +module_i2c_driver(it6263_driver); > > + > > +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > > +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); > > +MODULE_LICENSE("GPL"); > > -- > > 2.34.1 > > > > -- > With best wishes > Dmitry
Hi Liu Ying, > -----Original Message----- > From: Liu Ying <victor.liu@nxp.com> > Sent: Saturday, October 12, 2024 11:02 AM > To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Cc: dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > On 10/12/2024, Dmitry Baryshkov wrote: > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > >> Add basic HDMI video output support. Currently, only RGB888 output > >> pixel format is supported. At the LVDS input side, the driver > >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS > >> mapping. > >> > >> Product link: > >> https://www.ite.com.tw/en/product/cate1/IT6263 > >> > >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >> --- > >> v2: > >> * Add AVI inforframe support. (Maxime) > > > > Maxime asked to wire up the HDMI Connector framework. I have pushed > > the patch that converts lt9611.c driver. Please implement similar > > changes in your driver. > > Hmm, didn't fully get the meaning of "the new HDMI bridge infrastructure" > maxime asked. Ok, will take a look at lt9611.c. > > > > >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) > >> * Check number of LVDS link data lanes. (Biju) > >> > >> drivers/gpu/drm/bridge/Kconfig | 8 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/ite-it6263.c | 919 > >> ++++++++++++++++++++++++++++ > >> 3 files changed, 928 insertions(+) > >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >> > >> diff --git a/drivers/gpu/drm/bridge/Kconfig > >> b/drivers/gpu/drm/bridge/Kconfig index 3eb955333c80..93f99682a090 > >> 100644 > >> --- a/drivers/gpu/drm/bridge/Kconfig > >> +++ b/drivers/gpu/drm/bridge/Kconfig > >> @@ -90,6 +90,14 @@ config DRM_FSL_LDB > >> help > >> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > >> > >> +config DRM_ITE_IT6263 > >> + tristate "ITE IT6263 LVDS/HDMI bridge" > >> + depends on OF > >> + select DRM_KMS_HELPER > >> + select REGMAP_I2C > >> + help > >> + ITE IT6263 LVDS to HDMI bridge chip driver. > >> + > >> config DRM_ITE_IT6505 > >> tristate "ITE IT6505 DisplayPort bridge" > >> depends on OF > >> diff --git a/drivers/gpu/drm/bridge/Makefile > >> b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd > >> 100644 > >> --- a/drivers/gpu/drm/bridge/Makefile > >> +++ b/drivers/gpu/drm/bridge/Makefile > >> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += > >> chrontel-ch7033.o > >> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > >> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > >> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > >> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > >> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > >> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > >> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git > >> a/drivers/gpu/drm/bridge/ite-it6263.c > >> b/drivers/gpu/drm/bridge/ite-it6263.c > >> new file mode 100644 > >> index 000000000000..9b3318792f15 > >> --- /dev/null > >> +++ b/drivers/gpu/drm/bridge/ite-it6263.c > >> @@ -0,0 +1,919 @@ > >> +// SPDX-License-Identifier: GPL-2.0 > >> +/* > >> + * Copyright 2024 NXP > >> + */ > >> + > >> +#include <linux/bitfield.h> > >> +#include <linux/bits.h> > >> +#include <linux/delay.h> > >> +#include <linux/gpio/consumer.h> > >> +#include <linux/hdmi.h> > >> +#include <linux/i2c.h> > >> +#include <linux/media-bus-format.h> > >> +#include <linux/module.h> > >> +#include <linux/of.h> > >> +#include <linux/regmap.h> > >> +#include <linux/regulator/consumer.h> > >> + > >> +#include <drm/drm_atomic.h> > >> +#include <drm/drm_atomic_helper.h> > >> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > >> +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > >> +<drm/drm_edid.h> #include <drm/drm_of.h> #include > >> +<drm/drm_probe_helper.h> > >> + > >> +/* > >> +-------------------------------------------------------------------- > >> +--------- > >> + * LVDS registers > >> + */ > >> + > >> +/* LVDS software reset registers */ > >> +#define LVDS_REG_05 0x05 > >> +#define REG_SOFT_P_RST BIT(1) > >> + > >> +/* LVDS system configuration registers */ > >> +/* 0x0b */ > >> +#define LVDS_REG_0B 0x0b > >> +#define REG_SSC_PCLK_RF BIT(0) > >> +#define REG_LVDS_IN_SWAP BIT(1) > >> + > >> +/* LVDS test pattern gen control registers */ > >> +/* 0x2c */ > >> +#define LVDS_REG_2C 0x2c > >> +#define REG_COL_DEP GENMASK(1, 0) > >> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > >> +#define OUT_MAP BIT(4) > >> +#define JEIDA 0 > >> +#define REG_DESSC_ENB BIT(6) > >> +#define DMODE BIT(7) > >> +#define DISO BIT(7) > >> +#define SISO 0 > >> + > >> +#define LVDS_REG_3C 0x3c > >> +#define LVDS_REG_3F 0x3f > >> +#define LVDS_REG_47 0x47 > >> +#define LVDS_REG_48 0x48 > >> +#define LVDS_REG_4F 0x4f > >> +#define LVDS_REG_52 0x52 > >> + > >> +/* > >> +-------------------------------------------------------------------- > >> +--------- > >> + * HDMI registers are separated into three banks: > >> + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > >> + > >> +/* HDMI genernal registers */ > >> +#define HDMI_REG_SW_RST 0x04 > >> +#define SOFTREF_RST BIT(5) > >> +#define SOFTA_RST BIT(4) > >> +#define SOFTV_RST BIT(3) > >> +#define AUD_RST BIT(2) > >> +#define HDCP_RST BIT(0) > >> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > >> + AUD_RST | HDCP_RST) > >> + > >> +#define HDMI_REG_SYS_STATUS 0x0e > >> +#define HPDETECT BIT(6) > >> +#define TXVIDSTABLE BIT(4) > >> + > >> +#define HDMI_REG_BANK_CTRL 0x0f > >> +#define REG_BANK_SEL BIT(0) > >> + > >> +/* HDMI System DDC control registers */ > >> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > >> +#define MASTER_SEL_HOST BIT(0) > >> + > >> +#define HDMI_REG_DDC_HEADER 0x11 > >> + > >> +#define HDMI_REG_DDC_REQOFF 0x12 > >> +#define HDMI_REG_DDC_REQCOUNT 0x13 > >> +#define HDMI_REG_DDC_EDIDSEG 0x14 > >> + > >> +#define HDMI_REG_DDC_CMD 0x15 > >> +#define DDC_CMD_EDID_READ 0x3 > >> +#define DDC_CMD_FIFO_CLR 0x9 > >> + > >> +#define HDMI_REG_DDC_STATUS 0x16 > >> +#define DDC_DONE BIT(7) > >> +#define DDC_NOACK BIT(5) > >> +#define DDC_WAITBUS BIT(4) > >> +#define DDC_ARBILOSE BIT(3) > >> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > >> + > >> +#define HDMI_DDC_FIFO_BYTES 32 > >> +#define HDMI_REG_DDC_READFIFO 0x17 > >> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > >> +#define HDMI_REG_LVDS_PORT_EN 0x1e > >> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > >> + > >> +/* > >> +-------------------------------------------------------------------- > >> +--------- > >> + * 2) HDMI register bank0: 0x30 ~ 0xff */ > >> + > >> +/* HDMI AFE registers */ > >> +#define HDMI_REG_AFE_DRV_CTRL 0x61 > >> +#define AFE_DRV_PWD BIT(5) > >> +#define AFE_DRV_RST BIT(4) > >> + > >> +#define HDMI_REG_AFE_XP_CTRL 0x62 > >> +#define AFE_XP_GAINBIT BIT(7) > >> +#define AFE_XP_ER0 BIT(4) > >> +#define AFE_XP_RESETB BIT(3) > >> + > >> +#define HDMI_REG_AFE_ISW_CTRL 0x63 > >> + > >> +#define HDMI_REG_AFE_IP_CTRL 0x64 > >> +#define AFE_IP_GAINBIT BIT(7) > >> +#define AFE_IP_ER0 BIT(3) > >> +#define AFE_IP_RESETB BIT(2) > >> + > >> +/* HDMI input data format registers */ > >> +#define HDMI_REG_INPUT_MODE 0x70 > >> +#define IN_RGB 0x00 > >> + > >> +/* HDMI general control registers */ > >> +#define HDMI_REG_HDMI_MODE 0xc0 > >> +#define TX_HDMI_MODE BIT(0) > >> + > >> +#define HDMI_REG_GCP 0xc1 > >> +#define AVMUTE BIT(0) > >> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > >> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > >> + > >> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > >> +#define ENABLE_PKT BIT(0) > >> +#define REPEAT_PKT BIT(1) > >> + > >> +/* > >> +-------------------------------------------------------------------- > >> +--------- > >> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > >> + > >> +/* AVI packet registers */ > >> +#define HDMI_REG_AVI_DB1 0x158 > >> +#define HDMI_REG_AVI_DB2 0x159 > >> +#define HDMI_REG_AVI_DB3 0x15a > >> +#define HDMI_REG_AVI_DB4 0x15b > >> +#define HDMI_REG_AVI_DB5 0x15c > >> +#define HDMI_REG_AVI_CSUM 0x15d > >> +#define HDMI_REG_AVI_DB6 0x15e > >> +#define HDMI_REG_AVI_DB7 0x15f > >> +#define HDMI_REG_AVI_DB8 0x160 > >> +#define HDMI_REG_AVI_DB9 0x161 > >> +#define HDMI_REG_AVI_DB10 0x162 > >> +#define HDMI_REG_AVI_DB11 0x163 > >> +#define HDMI_REG_AVI_DB12 0x164 > >> +#define HDMI_REG_AVI_DB13 0x165 > >> + > >> +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) > >> +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) > >> + > >> +#define MAX_PIXEL_CLOCK_KHZ 150000 > >> +#define HIGH_PIXEL_CLOCK_KHZ 80000 > >> + > >> +struct it6263 { > >> + struct device *dev; > >> + struct i2c_client *hdmi_i2c; > >> + struct i2c_client *lvds_i2c; > >> + struct regmap *hdmi_regmap; > >> + struct regmap *lvds_regmap; > >> + struct drm_bridge bridge; > >> + struct drm_bridge *next_bridge; > >> + struct drm_connector connector; > >> + struct gpio_desc *reset_gpio; > >> + u8 lvds_link_num_dlanes; > >> + bool lvds_dual_link; > >> + bool lvds_link12_swap; > >> +}; > >> + > >> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > >> +*bridge) { > >> + return container_of(bridge, struct it6263, bridge); } > >> + > >> +static inline struct it6263 *connector_to_it6263(struct > >> +drm_connector *conn) { > >> + return container_of(conn, struct it6263, connector); } > >> + > >> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned > >> +int reg) { > >> + switch (reg) { > >> + case HDMI_REG_SW_RST: > >> + case HDMI_REG_BANK_CTRL: > >> + case HDMI_REG_DDC_MASTER_CTRL: > >> + case HDMI_REG_DDC_HEADER: > >> + case HDMI_REG_DDC_REQOFF: > >> + case HDMI_REG_DDC_REQCOUNT: > >> + case HDMI_REG_DDC_EDIDSEG: > >> + case HDMI_REG_DDC_CMD: > >> + case HDMI_REG_LVDS_PORT: > >> + case HDMI_REG_LVDS_PORT_EN: > >> + case HDMI_REG_AFE_DRV_CTRL: > >> + case HDMI_REG_AFE_XP_CTRL: > >> + case HDMI_REG_AFE_ISW_CTRL: > >> + case HDMI_REG_AFE_IP_CTRL: > >> + case HDMI_REG_INPUT_MODE: > >> + case HDMI_REG_HDMI_MODE: > >> + case HDMI_REG_GCP: > >> + case HDMI_REG_PKT_GENERAL_CTRL: > >> + case HDMI_REG_AVI_DB1: > >> + case HDMI_REG_AVI_DB2: > >> + case HDMI_REG_AVI_DB3: > >> + case HDMI_REG_AVI_DB4: > >> + case HDMI_REG_AVI_DB5: > >> + case HDMI_REG_AVI_CSUM: > >> + case HDMI_REG_AVI_DB6: > >> + case HDMI_REG_AVI_DB7: > >> + case HDMI_REG_AVI_DB8: > >> + case HDMI_REG_AVI_DB9: > >> + case HDMI_REG_AVI_DB10: > >> + case HDMI_REG_AVI_DB11: > >> + case HDMI_REG_AVI_DB12: > >> + case HDMI_REG_AVI_DB13: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned > >> +int reg) { > >> + if (it6263_hdmi_writeable_reg(dev, reg)) > >> + return true; > >> + > >> + switch (reg) { > >> + case HDMI_REG_SYS_STATUS: > >> + case HDMI_REG_DDC_STATUS: > >> + case HDMI_REG_DDC_READFIFO: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned > >> +int reg) { > >> + switch (reg) { > >> + case HDMI_REG_SW_RST: > >> + case HDMI_REG_SYS_STATUS: > >> + case HDMI_REG_DDC_STATUS: > >> + case HDMI_REG_DDC_READFIFO: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > >> + .range_min = 0x00, > >> + .range_max = HDMI_REG_AVI_DB13, > >> + .selector_reg = HDMI_REG_BANK_CTRL, > >> + .selector_mask = REG_BANK_SEL, > >> + .selector_shift = 0, > >> + .window_start = 0x00, > >> + .window_len = 0x100, > >> +}; > >> + > >> +static const struct regmap_config it6263_hdmi_regmap_config = { > >> + .name = "it6263-hdmi", > >> + .reg_bits = 8, > >> + .val_bits = 8, > >> + .writeable_reg = it6263_hdmi_writeable_reg, > >> + .readable_reg = it6263_hdmi_readable_reg, > >> + .volatile_reg = it6263_hdmi_volatile_reg, > >> + .max_register = HDMI_REG_AVI_DB13, > >> + .ranges = &it6263_hdmi_range_cfg, > >> + .num_ranges = 1, > >> + .cache_type = REGCACHE_MAPLE, > >> +}; > >> + > >> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned > >> +int reg) { > >> + switch (reg) { > >> + case LVDS_REG_05: > >> + case LVDS_REG_0B: > >> + case LVDS_REG_2C: > >> + case LVDS_REG_3C: > >> + case LVDS_REG_3F: > >> + case LVDS_REG_47: > >> + case LVDS_REG_48: > >> + case LVDS_REG_4F: > >> + case LVDS_REG_52: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned > >> +int reg) { > >> + return it6263_lvds_writeable_reg(dev, reg); } > >> + > >> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned > >> +int reg) { > >> + return reg == LVDS_REG_05; > >> +} > >> + > >> +static const struct regmap_config it6263_lvds_regmap_config = { > >> + .name = "it6263-lvds", > >> + .reg_bits = 8, > >> + .val_bits = 8, > >> + .writeable_reg = it6263_lvds_writeable_reg, > >> + .readable_reg = it6263_lvds_readable_reg, > >> + .volatile_reg = it6263_lvds_volatile_reg, > >> + .max_register = LVDS_REG_52, > >> + .cache_type = REGCACHE_MAPLE, > >> +}; > >> + > >> +static const char * const it6263_supplies[] = { > >> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > >> + "avcc", "anvdd", "apvdd" > >> +}; > >> + > >> +static int it6263_parse_dt(struct it6263 *it) { > >> + struct device *dev = it->dev; > >> + struct device_node *port0, *port1; > >> + int ret; > >> + > >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > >> + &it->lvds_link_num_dlanes); > >> + if (ret) { > >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > >> + ret); > >> + return ret; > >> + } > >> + > >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > >> + if (IS_ERR(it->next_bridge)) > >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > >> + "failed to get next bridge\n"); > >> + > >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > >> + if (port0 && port1) { > >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > >> + it->lvds_dual_link = true; > >> + it->lvds_link12_swap = true; > > > > This is a nice name for the propery in the Dual Link LVDS case: > > > > ite,lvds-link-swap > > Swapping LVDS link1&2 is implied by the dual-lvds-{even,odd}-pixels properties that DT writers specify > in port@0 and port@1. > > The DT writers don't need to use a dedicated property like ite,lvds-link-swap to explicitly indicate > the swap. > > > > > > >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > >> + it->lvds_dual_link = true; > >> + } > >> + > >> + if (!it->lvds_dual_link) { > >> + dev_err(dev, > >> + "failed to get LVDS dual link pixel order\n"); > >> + ret = -EINVAL; > >> + } > >> + } else if (port1) { > >> + ret = -EINVAL; > >> + dev_err(dev, "single input LVDS port1 is not supported\n"); > >> + } else if (!port0) { > >> + ret = -EINVAL; > >> + dev_err(dev, "no input LVDS port\n"); > >> + } > >> + > >> + of_node_put(port0); > >> + of_node_put(port1); > >> + > >> + return ret; > >> +} > >> + > >> +static inline void it6263_hw_reset(struct it6263 *it) { > >> + if (!it->reset_gpio) > >> + return; > >> + > >> + gpiod_set_value_cansleep(it->reset_gpio, 0); > >> + fsleep(1000); > >> + gpiod_set_value_cansleep(it->reset_gpio, 1); > >> + /* The chip maker says the low pulse should be at least 40ms. */ > >> + fsleep(40000); > >> + gpiod_set_value_cansleep(it->reset_gpio, 0); > >> + /* addtional time to wait the high voltage to be stable */ > >> + fsleep(5000); > >> +} > >> + > >> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > >> + int ret; > >> + > >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > >> + LVDS_INPUT_CTRL_I2C_ADDR << 1); > >> + if (ret) > >> + return ret; > >> + > >> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, > >> +BIT(0)); } > >> + > >> +static inline void it6263_lvds_reset(struct it6263 *it) { > >> + /* AFE PLL reset */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > >> + fsleep(1000); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > >> + > >> + /* software pixel clock domain reset */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > >> + REG_SOFT_P_RST); > >> + fsleep(1000); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > >> + fsleep(10000); > >> +} > >> + > >> +static inline void it6263_lvds_set_interface(struct it6263 *it) { > >> + /* color depth */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > >> + /* output mapping */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > >> + > >> + if (it->lvds_dual_link) { > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > >> + } else { > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > >> + } > >> +} > >> + > >> +static inline void it6263_lvds_set_afe(struct it6263 *it) { > >> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > >> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > >> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > >> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > >> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > >> + > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > >> + REG_SSC_PCLK_RF); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > >> + REG_DESSC_ENB); > >> +} > >> + > >> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > >> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > >> + > >> +static inline void it6263_lvds_config(struct it6263 *it) { > >> + it6263_lvds_reset(it); > >> + it6263_lvds_set_interface(it); > >> + it6263_lvds_set_afe(it); > >> + it6263_lvds_sys_cfg(it); > >> +} > >> + > >> +static inline void it6263_hdmi_config(struct it6263 *it) { > >> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > >> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > >> + HDMI_COLOR_DEPTH_24); > >> +} > >> + > >> +static enum drm_connector_status it6263_detect(struct it6263 *it) { > >> + unsigned int val; > >> + > >> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > >> + if (val & HPDETECT) > >> + return connector_status_connected; > >> + else > >> + return connector_status_disconnected; } > >> + > >> +static enum drm_connector_status > >> +it6263_connector_detect(struct drm_connector *connector, bool force) > >> +{ > >> + struct it6263 *it = connector_to_it6263(connector); > >> + > >> + return it6263_detect(it); > >> +} > >> + > >> +static const struct drm_connector_funcs it6263_connector_funcs = { > >> + .detect = it6263_connector_detect, > >> + .fill_modes = drm_helper_probe_single_connector_modes, > >> + .destroy = drm_connector_cleanup, > >> + .reset = drm_atomic_helper_connector_reset, > >> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > >> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > >> +}; > >> + > >> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > >> +size_t len) { > >> + struct it6263 *it = data; > >> + struct regmap *regmap = it->hdmi_regmap; > >> + unsigned int start = (block % 2) * EDID_LENGTH; > >> + unsigned int segment = block >> 1; > >> + unsigned int count, val; > >> + int ret; > >> + > >> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > >> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > >> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > >> + > >> + while (len) { > >> + /* clear DDC FIFO */ > >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > >> + > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > >> + val, val & DDC_DONE, > >> + 2000, 10000); > >> + if (ret) { > >> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > >> + return ret; > >> + } > >> + > >> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > >> + > >> + /* fire the read command */ > >> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > >> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > >> + > >> + start += count; > >> + len -= count; > >> + > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > >> + val & (DDC_DONE | DDC_ERROR), > >> + 20000, 250000); > >> + if (ret && !(val & DDC_ERROR)) { > >> + dev_err(it->dev, "failed to read EDID:%d\n", ret); > >> + return ret; > >> + } > >> + > >> + if (val & DDC_ERROR) { > >> + dev_err(it->dev, "DDC error\n"); > >> + return -EIO; > >> + } > >> + > >> + /* cache to buffer */ > >> + for (; count > 0; count--) { > >> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > >> + *(buf++) = val; > >> + } > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static int it6263_connector_get_modes(struct drm_connector > >> +*connector) { > >> + struct it6263 *it = connector_to_it6263(connector); > >> + const struct drm_edid *drm_edid; > >> + int count; > >> + > >> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > >> + > >> + drm_edid_connector_update(connector, drm_edid); > >> + count = drm_edid_connector_add_modes(connector); > >> + > >> + drm_edid_free(drm_edid); > >> + > >> + return count; > >> +} > >> + > >> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > >> + .get_modes = it6263_connector_get_modes, }; > >> + > >> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > >> + struct drm_bridge_state *bridge_state, > >> + struct drm_crtc_state *crtc_state, > >> + struct drm_connector_state *conn_state) { > >> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > > > Use drm_atomic_helper_connector_hdmi_check(). > > Will take a look at this. > > > > > Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual > > Will take a look at this. > > > link LVDS have different max clock rates. Please correct me if I'm > > wrong. > > Yes, I think so too. But, I don't know the exact max clock rates. > IT6263 data sheet only says LVDS RX supports clock rate up to 150MHz. > > > > >> + > >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > >> + > >> +static void > >> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > >> + struct drm_bridge_state *old_bridge_state) { > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + > >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > >> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > >> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > >> + AFE_DRV_RST | AFE_DRV_PWD); > >> +} > >> + > >> +static void > >> +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, > >> + struct drm_connector *connector, > >> + const struct drm_display_mode *mode) > > > > -> .hdmi_write_infoframe() , .hdmi_clear_infoframe(). > > > Will take a look at them. > > > > >> +{ > >> + struct hdmi_avi_infoframe frame; > >> + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; > >> + int ret; > >> + > >> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); > >> + if (ret) { > >> + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); > >> + return; > >> + } > >> + > >> + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); > >> + if (ret < 0) { > >> + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); > >> + return; > >> + } > >> + > >> + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ > >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, > >> + &buf[HDMI_INFOFRAME_HEADER_SIZE], > >> + HDMI_AVI_DB_CHUNK1_SIZE); > >> + if (ret) { > >> + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", > >> + ret); > >> + return; > >> + } > >> + > >> + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ > >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, > >> + &buf[HDMI_INFOFRAME_HEADER_SIZE + > >> + HDMI_AVI_DB_CHUNK1_SIZE], > >> + HDMI_AVI_DB_CHUNK2_SIZE); > >> + if (ret) { > >> + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", > >> + ret); > >> + return; > >> + } > >> + > >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); > >> + if (ret) > >> + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", > >> + ret); > >> +} > >> + > >> +static void > >> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > >> + struct drm_bridge_state *old_bridge_state) { > >> + struct drm_atomic_state *state = old_bridge_state->base.state; > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + const struct drm_crtc_state *crtc_state; > >> + struct regmap *regmap = it->hdmi_regmap; > >> + const struct drm_display_mode *mode; > >> + struct drm_connector *connector; > >> + bool is_stable = false; > >> + struct drm_crtc *crtc; > >> + unsigned int val; > >> + bool pclk_high; > >> + int i, ret; > >> + > >> + connector = drm_atomic_get_new_connector_for_encoder(state, > >> + bridge->encoder); > >> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > >> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > >> + mode = &crtc_state->adjusted_mode; > >> + > >> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > >> + > >> + it6263_hdmi_avi_infoframe_configure(it, connector, mode); > > > > drm_atomic_helper_connector_hdmi_update_infoframes > > Will take a look at this. > > > > >> + > >> + /* HDMI AFE setup */ > >> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > >> + if (pclk_high) > >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > >> + AFE_XP_GAINBIT | AFE_XP_RESETB); > >> + else > >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > >> + AFE_XP_ER0 | AFE_XP_RESETB); > >> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > >> + if (pclk_high) > >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > >> + AFE_IP_GAINBIT | AFE_IP_RESETB); > >> + else > >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > >> + AFE_IP_ER0 | AFE_IP_RESETB); > >> + > >> + /* HDMI software video reset */ > >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > >> + fsleep(1000); > >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > >> + > >> + /* reconfigure LVDS and retry several times in case video is instable */ > >> + for (i = 0; i < 3; i++) { > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > >> + val & TXVIDSTABLE, > >> + 20000, 500000); > >> + if (!ret) { > >> + is_stable = true; > >> + break; > >> + } > >> + > >> + it6263_lvds_config(it); > >> + } > >> + > >> + if (!is_stable) > >> + dev_warn(it->dev, "failed to wait for video stable\n"); > >> + > >> + /* HDMI AFE reset release and power up */ > >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > >> + > >> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > >> + > >> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > >> +REPEAT_PKT); } > >> + > >> +static enum drm_mode_status > >> +it6263_bridge_mode_valid(struct drm_bridge *bridge, > >> + const struct drm_display_info *info, > >> + const struct drm_display_mode *mode) { > >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : > >> +MODE_OK; > > > > rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB); > > return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, > > rate); > > Will look into the two lines. > > > > >> +} > >> + > >> +static int it6263_bridge_attach(struct drm_bridge *bridge, > >> + enum drm_bridge_attach_flags flags) { > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + int ret; > >> + > >> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > >> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > >> + if (ret < 0) > >> + return ret; > >> + > >> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > >> + return 0; > >> + > >> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > >> + DRM_CONNECTOR_POLL_DISCONNECT; > >> + > > > > Please strongly consider dropping this and using drm_bridge_connector > > in the host driver. > > I can't afford to make i.MX8MP imx-lcdif KMS use drm_bridge_connector currently. Maybe the Renesas > RZ/G3E SMARC EVK Biju tested v1 patch set with is also not using drm_bridge_connector. I hope we can > leave it as-is for now. Renesas platform use the drm_bridge_connector_init() helper to create a drm_connector for each output, instead of relying on the bridge drivers doing so. It attach the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct them not to create a connector. On Renesas platform, it exit from here if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) return 0; Maybe it is good to have both cases to start with. Add support for both cases now, Later when imx-lcdif KMS start using drm_bridge_connector, we can start dropping bridge devices to create connector?? Dmitry, are you ok with this? Cheers, Biju
On Sat, Oct 12, 2024 at 06:01:30PM +0800, Liu Ying wrote: > On 10/12/2024, Dmitry Baryshkov wrote: > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > >> Add basic HDMI video output support. Currently, only RGB888 output > >> pixel format is supported. At the LVDS input side, the driver > >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS > >> mapping. > >> > >> Product link: > >> https://www.ite.com.tw/en/product/cate1/IT6263 > >> > >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >> --- > >> v2: > >> * Add AVI inforframe support. (Maxime) > > > > Maxime asked to wire up the HDMI Connector framework. I have pushed the > > patch that converts lt9611.c driver. Please implement similar changes in > > your driver. > > Hmm, didn't fully get the meaning of "the new HDMI bridge infrastructure" > maxime asked. Ok, will take a look at lt9611.c. > > > > >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) > >> * Check number of LVDS link data lanes. (Biju) > >> > >> drivers/gpu/drm/bridge/Kconfig | 8 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ > >> 3 files changed, 928 insertions(+) > >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >> > >> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > >> index 3eb955333c80..93f99682a090 100644 > >> --- a/drivers/gpu/drm/bridge/Kconfig > >> +++ b/drivers/gpu/drm/bridge/Kconfig > >> @@ -90,6 +90,14 @@ config DRM_FSL_LDB > >> help > >> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > >> > >> +config DRM_ITE_IT6263 > >> + tristate "ITE IT6263 LVDS/HDMI bridge" > >> + depends on OF > >> + select DRM_KMS_HELPER > >> + select REGMAP_I2C > >> + help > >> + ITE IT6263 LVDS to HDMI bridge chip driver. > >> + > >> config DRM_ITE_IT6505 > >> tristate "ITE IT6505 DisplayPort bridge" > >> depends on OF > >> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > >> index 7df87b582dca..f3776dd473fd 100644 > >> --- a/drivers/gpu/drm/bridge/Makefile > >> +++ b/drivers/gpu/drm/bridge/Makefile > >> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > >> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > >> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > >> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > >> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > >> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > >> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > >> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o > >> diff --git a/drivers/gpu/drm/bridge/ite-it6263.c b/drivers/gpu/drm/bridge/ite-it6263.c > >> new file mode 100644 > >> index 000000000000..9b3318792f15 > >> --- /dev/null > >> +++ b/drivers/gpu/drm/bridge/ite-it6263.c > >> @@ -0,0 +1,919 @@ > >> +// SPDX-License-Identifier: GPL-2.0 > >> +/* > >> + * Copyright 2024 NXP > >> + */ > >> + > >> +#include <linux/bitfield.h> > >> +#include <linux/bits.h> > >> +#include <linux/delay.h> > >> +#include <linux/gpio/consumer.h> > >> +#include <linux/hdmi.h> > >> +#include <linux/i2c.h> > >> +#include <linux/media-bus-format.h> > >> +#include <linux/module.h> > >> +#include <linux/of.h> > >> +#include <linux/regmap.h> > >> +#include <linux/regulator/consumer.h> > >> + > >> +#include <drm/drm_atomic.h> > >> +#include <drm/drm_atomic_helper.h> > >> +#include <drm/drm_atomic_state_helper.h> > >> +#include <drm/drm_bridge.h> > >> +#include <drm/drm_connector.h> > >> +#include <drm/drm_crtc.h> > >> +#include <drm/drm_edid.h> > >> +#include <drm/drm_of.h> > >> +#include <drm/drm_probe_helper.h> > >> + > >> +/* ----------------------------------------------------------------------------- > >> + * LVDS registers > >> + */ > >> + > >> +/* LVDS software reset registers */ > >> +#define LVDS_REG_05 0x05 > >> +#define REG_SOFT_P_RST BIT(1) > >> + > >> +/* LVDS system configuration registers */ > >> +/* 0x0b */ > >> +#define LVDS_REG_0B 0x0b > >> +#define REG_SSC_PCLK_RF BIT(0) > >> +#define REG_LVDS_IN_SWAP BIT(1) > >> + > >> +/* LVDS test pattern gen control registers */ > >> +/* 0x2c */ > >> +#define LVDS_REG_2C 0x2c > >> +#define REG_COL_DEP GENMASK(1, 0) > >> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > >> +#define OUT_MAP BIT(4) > >> +#define JEIDA 0 > >> +#define REG_DESSC_ENB BIT(6) > >> +#define DMODE BIT(7) > >> +#define DISO BIT(7) > >> +#define SISO 0 > >> + > >> +#define LVDS_REG_3C 0x3c > >> +#define LVDS_REG_3F 0x3f > >> +#define LVDS_REG_47 0x47 > >> +#define LVDS_REG_48 0x48 > >> +#define LVDS_REG_4F 0x4f > >> +#define LVDS_REG_52 0x52 > >> + > >> +/* ----------------------------------------------------------------------------- > >> + * HDMI registers are separated into three banks: > >> + * 1) HDMI register common bank: 0x00 ~ 0x2f > >> + */ > >> + > >> +/* HDMI genernal registers */ > >> +#define HDMI_REG_SW_RST 0x04 > >> +#define SOFTREF_RST BIT(5) > >> +#define SOFTA_RST BIT(4) > >> +#define SOFTV_RST BIT(3) > >> +#define AUD_RST BIT(2) > >> +#define HDCP_RST BIT(0) > >> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > >> + AUD_RST | HDCP_RST) > >> + > >> +#define HDMI_REG_SYS_STATUS 0x0e > >> +#define HPDETECT BIT(6) > >> +#define TXVIDSTABLE BIT(4) > >> + > >> +#define HDMI_REG_BANK_CTRL 0x0f > >> +#define REG_BANK_SEL BIT(0) > >> + > >> +/* HDMI System DDC control registers */ > >> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > >> +#define MASTER_SEL_HOST BIT(0) > >> + > >> +#define HDMI_REG_DDC_HEADER 0x11 > >> + > >> +#define HDMI_REG_DDC_REQOFF 0x12 > >> +#define HDMI_REG_DDC_REQCOUNT 0x13 > >> +#define HDMI_REG_DDC_EDIDSEG 0x14 > >> + > >> +#define HDMI_REG_DDC_CMD 0x15 > >> +#define DDC_CMD_EDID_READ 0x3 > >> +#define DDC_CMD_FIFO_CLR 0x9 > >> + > >> +#define HDMI_REG_DDC_STATUS 0x16 > >> +#define DDC_DONE BIT(7) > >> +#define DDC_NOACK BIT(5) > >> +#define DDC_WAITBUS BIT(4) > >> +#define DDC_ARBILOSE BIT(3) > >> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > >> + > >> +#define HDMI_DDC_FIFO_BYTES 32 > >> +#define HDMI_REG_DDC_READFIFO 0x17 > >> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > >> +#define HDMI_REG_LVDS_PORT_EN 0x1e > >> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > >> + > >> +/* ----------------------------------------------------------------------------- > >> + * 2) HDMI register bank0: 0x30 ~ 0xff > >> + */ > >> + > >> +/* HDMI AFE registers */ > >> +#define HDMI_REG_AFE_DRV_CTRL 0x61 > >> +#define AFE_DRV_PWD BIT(5) > >> +#define AFE_DRV_RST BIT(4) > >> + > >> +#define HDMI_REG_AFE_XP_CTRL 0x62 > >> +#define AFE_XP_GAINBIT BIT(7) > >> +#define AFE_XP_ER0 BIT(4) > >> +#define AFE_XP_RESETB BIT(3) > >> + > >> +#define HDMI_REG_AFE_ISW_CTRL 0x63 > >> + > >> +#define HDMI_REG_AFE_IP_CTRL 0x64 > >> +#define AFE_IP_GAINBIT BIT(7) > >> +#define AFE_IP_ER0 BIT(3) > >> +#define AFE_IP_RESETB BIT(2) > >> + > >> +/* HDMI input data format registers */ > >> +#define HDMI_REG_INPUT_MODE 0x70 > >> +#define IN_RGB 0x00 > >> + > >> +/* HDMI general control registers */ > >> +#define HDMI_REG_HDMI_MODE 0xc0 > >> +#define TX_HDMI_MODE BIT(0) > >> + > >> +#define HDMI_REG_GCP 0xc1 > >> +#define AVMUTE BIT(0) > >> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > >> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > >> + > >> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > >> +#define ENABLE_PKT BIT(0) > >> +#define REPEAT_PKT BIT(1) > >> + > >> +/* ----------------------------------------------------------------------------- > >> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) > >> + */ > >> + > >> +/* AVI packet registers */ > >> +#define HDMI_REG_AVI_DB1 0x158 > >> +#define HDMI_REG_AVI_DB2 0x159 > >> +#define HDMI_REG_AVI_DB3 0x15a > >> +#define HDMI_REG_AVI_DB4 0x15b > >> +#define HDMI_REG_AVI_DB5 0x15c > >> +#define HDMI_REG_AVI_CSUM 0x15d > >> +#define HDMI_REG_AVI_DB6 0x15e > >> +#define HDMI_REG_AVI_DB7 0x15f > >> +#define HDMI_REG_AVI_DB8 0x160 > >> +#define HDMI_REG_AVI_DB9 0x161 > >> +#define HDMI_REG_AVI_DB10 0x162 > >> +#define HDMI_REG_AVI_DB11 0x163 > >> +#define HDMI_REG_AVI_DB12 0x164 > >> +#define HDMI_REG_AVI_DB13 0x165 > >> + > >> +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) > >> +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) > >> + > >> +#define MAX_PIXEL_CLOCK_KHZ 150000 > >> +#define HIGH_PIXEL_CLOCK_KHZ 80000 > >> + > >> +struct it6263 { > >> + struct device *dev; > >> + struct i2c_client *hdmi_i2c; > >> + struct i2c_client *lvds_i2c; > >> + struct regmap *hdmi_regmap; > >> + struct regmap *lvds_regmap; > >> + struct drm_bridge bridge; > >> + struct drm_bridge *next_bridge; > >> + struct drm_connector connector; > >> + struct gpio_desc *reset_gpio; > >> + u8 lvds_link_num_dlanes; > >> + bool lvds_dual_link; > >> + bool lvds_link12_swap; > >> +}; > >> + > >> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge *bridge) > >> +{ > >> + return container_of(bridge, struct it6263, bridge); > >> +} > >> + > >> +static inline struct it6263 *connector_to_it6263(struct drm_connector *conn) > >> +{ > >> + return container_of(conn, struct it6263, connector); > >> +} > >> + > >> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int reg) > >> +{ > >> + switch (reg) { > >> + case HDMI_REG_SW_RST: > >> + case HDMI_REG_BANK_CTRL: > >> + case HDMI_REG_DDC_MASTER_CTRL: > >> + case HDMI_REG_DDC_HEADER: > >> + case HDMI_REG_DDC_REQOFF: > >> + case HDMI_REG_DDC_REQCOUNT: > >> + case HDMI_REG_DDC_EDIDSEG: > >> + case HDMI_REG_DDC_CMD: > >> + case HDMI_REG_LVDS_PORT: > >> + case HDMI_REG_LVDS_PORT_EN: > >> + case HDMI_REG_AFE_DRV_CTRL: > >> + case HDMI_REG_AFE_XP_CTRL: > >> + case HDMI_REG_AFE_ISW_CTRL: > >> + case HDMI_REG_AFE_IP_CTRL: > >> + case HDMI_REG_INPUT_MODE: > >> + case HDMI_REG_HDMI_MODE: > >> + case HDMI_REG_GCP: > >> + case HDMI_REG_PKT_GENERAL_CTRL: > >> + case HDMI_REG_AVI_DB1: > >> + case HDMI_REG_AVI_DB2: > >> + case HDMI_REG_AVI_DB3: > >> + case HDMI_REG_AVI_DB4: > >> + case HDMI_REG_AVI_DB5: > >> + case HDMI_REG_AVI_CSUM: > >> + case HDMI_REG_AVI_DB6: > >> + case HDMI_REG_AVI_DB7: > >> + case HDMI_REG_AVI_DB8: > >> + case HDMI_REG_AVI_DB9: > >> + case HDMI_REG_AVI_DB10: > >> + case HDMI_REG_AVI_DB11: > >> + case HDMI_REG_AVI_DB12: > >> + case HDMI_REG_AVI_DB13: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int reg) > >> +{ > >> + if (it6263_hdmi_writeable_reg(dev, reg)) > >> + return true; > >> + > >> + switch (reg) { > >> + case HDMI_REG_SYS_STATUS: > >> + case HDMI_REG_DDC_STATUS: > >> + case HDMI_REG_DDC_READFIFO: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int reg) > >> +{ > >> + switch (reg) { > >> + case HDMI_REG_SW_RST: > >> + case HDMI_REG_SYS_STATUS: > >> + case HDMI_REG_DDC_STATUS: > >> + case HDMI_REG_DDC_READFIFO: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > >> + .range_min = 0x00, > >> + .range_max = HDMI_REG_AVI_DB13, > >> + .selector_reg = HDMI_REG_BANK_CTRL, > >> + .selector_mask = REG_BANK_SEL, > >> + .selector_shift = 0, > >> + .window_start = 0x00, > >> + .window_len = 0x100, > >> +}; > >> + > >> +static const struct regmap_config it6263_hdmi_regmap_config = { > >> + .name = "it6263-hdmi", > >> + .reg_bits = 8, > >> + .val_bits = 8, > >> + .writeable_reg = it6263_hdmi_writeable_reg, > >> + .readable_reg = it6263_hdmi_readable_reg, > >> + .volatile_reg = it6263_hdmi_volatile_reg, > >> + .max_register = HDMI_REG_AVI_DB13, > >> + .ranges = &it6263_hdmi_range_cfg, > >> + .num_ranges = 1, > >> + .cache_type = REGCACHE_MAPLE, > >> +}; > >> + > >> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int reg) > >> +{ > >> + switch (reg) { > >> + case LVDS_REG_05: > >> + case LVDS_REG_0B: > >> + case LVDS_REG_2C: > >> + case LVDS_REG_3C: > >> + case LVDS_REG_3F: > >> + case LVDS_REG_47: > >> + case LVDS_REG_48: > >> + case LVDS_REG_4F: > >> + case LVDS_REG_52: > >> + return true; > >> + default: > >> + return false; > >> + } > >> +} > >> + > >> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int reg) > >> +{ > >> + return it6263_lvds_writeable_reg(dev, reg); > >> +} > >> + > >> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int reg) > >> +{ > >> + return reg == LVDS_REG_05; > >> +} > >> + > >> +static const struct regmap_config it6263_lvds_regmap_config = { > >> + .name = "it6263-lvds", > >> + .reg_bits = 8, > >> + .val_bits = 8, > >> + .writeable_reg = it6263_lvds_writeable_reg, > >> + .readable_reg = it6263_lvds_readable_reg, > >> + .volatile_reg = it6263_lvds_volatile_reg, > >> + .max_register = LVDS_REG_52, > >> + .cache_type = REGCACHE_MAPLE, > >> +}; > >> + > >> +static const char * const it6263_supplies[] = { > >> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > >> + "avcc", "anvdd", "apvdd" > >> +}; > >> + > >> +static int it6263_parse_dt(struct it6263 *it) > >> +{ > >> + struct device *dev = it->dev; > >> + struct device_node *port0, *port1; > >> + int ret; > >> + > >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > >> + &it->lvds_link_num_dlanes); > >> + if (ret) { > >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > >> + ret); > >> + return ret; > >> + } > >> + > >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > >> + if (IS_ERR(it->next_bridge)) > >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > >> + "failed to get next bridge\n"); > >> + > >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > >> + if (port0 && port1) { > >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > >> + it->lvds_dual_link = true; > >> + it->lvds_link12_swap = true; > > > > This is a nice name for the propery in the Dual Link LVDS case: > > > > ite,lvds-link-swap > > Swapping LVDS link1&2 is implied by the dual-lvds-{even,odd}-pixels > properties that DT writers specify in port@0 and port@1. > > The DT writers don't need to use a dedicated property like > ite,lvds-link-swap to explicitly indicate the swap. Ack > > > > > > >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > >> + it->lvds_dual_link = true; > >> + } > >> + > >> + if (!it->lvds_dual_link) { > >> + dev_err(dev, > >> + "failed to get LVDS dual link pixel order\n"); > >> + ret = -EINVAL; > >> + } > >> + } else if (port1) { > >> + ret = -EINVAL; > >> + dev_err(dev, "single input LVDS port1 is not supported\n"); > >> + } else if (!port0) { > >> + ret = -EINVAL; > >> + dev_err(dev, "no input LVDS port\n"); > >> + } > >> + > >> + of_node_put(port0); > >> + of_node_put(port1); > >> + > >> + return ret; > >> +} > >> + > >> +static inline void it6263_hw_reset(struct it6263 *it) > >> +{ > >> + if (!it->reset_gpio) > >> + return; > >> + > >> + gpiod_set_value_cansleep(it->reset_gpio, 0); > >> + fsleep(1000); > >> + gpiod_set_value_cansleep(it->reset_gpio, 1); > >> + /* The chip maker says the low pulse should be at least 40ms. */ > >> + fsleep(40000); > >> + gpiod_set_value_cansleep(it->reset_gpio, 0); > >> + /* addtional time to wait the high voltage to be stable */ > >> + fsleep(5000); > >> +} > >> + > >> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) > >> +{ > >> + int ret; > >> + > >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > >> + LVDS_INPUT_CTRL_I2C_ADDR << 1); > >> + if (ret) > >> + return ret; > >> + > >> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); > >> +} > >> + > >> +static inline void it6263_lvds_reset(struct it6263 *it) > >> +{ > >> + /* AFE PLL reset */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > >> + fsleep(1000); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > >> + > >> + /* software pixel clock domain reset */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > >> + REG_SOFT_P_RST); > >> + fsleep(1000); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > >> + fsleep(10000); > >> +} > >> + > >> +static inline void it6263_lvds_set_interface(struct it6263 *it) > >> +{ > >> + /* color depth */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > >> + /* output mapping */ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > >> + > >> + if (it->lvds_dual_link) { > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > >> + } else { > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > >> + } > >> +} > >> + > >> +static inline void it6263_lvds_set_afe(struct it6263 *it) > >> +{ > >> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > >> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > >> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > >> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > >> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > >> + > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > >> + REG_SSC_PCLK_RF); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > >> + REG_DESSC_ENB); > >> +} > >> + > >> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) > >> +{ > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > >> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); > >> +} > >> + > >> +static inline void it6263_lvds_config(struct it6263 *it) > >> +{ > >> + it6263_lvds_reset(it); > >> + it6263_lvds_set_interface(it); > >> + it6263_lvds_set_afe(it); > >> + it6263_lvds_sys_cfg(it); > >> +} > >> + > >> +static inline void it6263_hdmi_config(struct it6263 *it) > >> +{ > >> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > >> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > >> + HDMI_COLOR_DEPTH_24); > >> +} > >> + > >> +static enum drm_connector_status it6263_detect(struct it6263 *it) > >> +{ > >> + unsigned int val; > >> + > >> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > >> + if (val & HPDETECT) > >> + return connector_status_connected; > >> + else > >> + return connector_status_disconnected; > >> +} > >> + > >> +static enum drm_connector_status > >> +it6263_connector_detect(struct drm_connector *connector, bool force) > >> +{ > >> + struct it6263 *it = connector_to_it6263(connector); > >> + > >> + return it6263_detect(it); > >> +} > >> + > >> +static const struct drm_connector_funcs it6263_connector_funcs = { > >> + .detect = it6263_connector_detect, > >> + .fill_modes = drm_helper_probe_single_connector_modes, > >> + .destroy = drm_connector_cleanup, > >> + .reset = drm_atomic_helper_connector_reset, > >> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > >> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > >> +}; > >> + > >> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, size_t len) > >> +{ > >> + struct it6263 *it = data; > >> + struct regmap *regmap = it->hdmi_regmap; > >> + unsigned int start = (block % 2) * EDID_LENGTH; > >> + unsigned int segment = block >> 1; > >> + unsigned int count, val; > >> + int ret; > >> + > >> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > >> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > >> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > >> + > >> + while (len) { > >> + /* clear DDC FIFO */ > >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > >> + > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > >> + val, val & DDC_DONE, > >> + 2000, 10000); > >> + if (ret) { > >> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > >> + return ret; > >> + } > >> + > >> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > >> + > >> + /* fire the read command */ > >> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > >> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > >> + > >> + start += count; > >> + len -= count; > >> + > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > >> + val & (DDC_DONE | DDC_ERROR), > >> + 20000, 250000); > >> + if (ret && !(val & DDC_ERROR)) { > >> + dev_err(it->dev, "failed to read EDID:%d\n", ret); > >> + return ret; > >> + } > >> + > >> + if (val & DDC_ERROR) { > >> + dev_err(it->dev, "DDC error\n"); > >> + return -EIO; > >> + } > >> + > >> + /* cache to buffer */ > >> + for (; count > 0; count--) { > >> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > >> + *(buf++) = val; > >> + } > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static int it6263_connector_get_modes(struct drm_connector *connector) > >> +{ > >> + struct it6263 *it = connector_to_it6263(connector); > >> + const struct drm_edid *drm_edid; > >> + int count; > >> + > >> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > >> + > >> + drm_edid_connector_update(connector, drm_edid); > >> + count = drm_edid_connector_add_modes(connector); > >> + > >> + drm_edid_free(drm_edid); > >> + > >> + return count; > >> +} > >> + > >> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > >> + .get_modes = it6263_connector_get_modes, > >> +}; > >> + > >> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > >> + struct drm_bridge_state *bridge_state, > >> + struct drm_crtc_state *crtc_state, > >> + struct drm_connector_state *conn_state) > >> +{ > >> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > > > Use drm_atomic_helper_connector_hdmi_check(). > > Will take a look at this. > > > > > Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual > > Will take a look at this. > > > link LVDS have different max clock rates. Please correct me if I'm > > wrong. > > Yes, I think so too. But, I don't know the exact max clock rates. > IT6263 data sheet only says LVDS RX supports clock rate up to > 150MHz. Is this the mode clock or the LVDS link clock rate? > > > > >> + > >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; > >> +} > >> + > >> +static void > >> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > >> + struct drm_bridge_state *old_bridge_state) > >> +{ > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + > >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > >> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > >> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > >> + AFE_DRV_RST | AFE_DRV_PWD); > >> +} > >> + > >> +static void > >> +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, > >> + struct drm_connector *connector, > >> + const struct drm_display_mode *mode) > > > > -> .hdmi_write_infoframe() , .hdmi_clear_infoframe(). > > > Will take a look at them. > > > > >> +{ > >> + struct hdmi_avi_infoframe frame; > >> + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; > >> + int ret; > >> + > >> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); > >> + if (ret) { > >> + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); > >> + return; > >> + } > >> + > >> + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); > >> + if (ret < 0) { > >> + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); > >> + return; > >> + } > >> + > >> + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ > >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, > >> + &buf[HDMI_INFOFRAME_HEADER_SIZE], > >> + HDMI_AVI_DB_CHUNK1_SIZE); > >> + if (ret) { > >> + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", > >> + ret); > >> + return; > >> + } > >> + > >> + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ > >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, > >> + &buf[HDMI_INFOFRAME_HEADER_SIZE + > >> + HDMI_AVI_DB_CHUNK1_SIZE], > >> + HDMI_AVI_DB_CHUNK2_SIZE); > >> + if (ret) { > >> + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", > >> + ret); > >> + return; > >> + } > >> + > >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); > >> + if (ret) > >> + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", > >> + ret); > >> +} > >> + > >> +static void > >> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > >> + struct drm_bridge_state *old_bridge_state) > >> +{ > >> + struct drm_atomic_state *state = old_bridge_state->base.state; > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + const struct drm_crtc_state *crtc_state; > >> + struct regmap *regmap = it->hdmi_regmap; > >> + const struct drm_display_mode *mode; > >> + struct drm_connector *connector; > >> + bool is_stable = false; > >> + struct drm_crtc *crtc; > >> + unsigned int val; > >> + bool pclk_high; > >> + int i, ret; > >> + > >> + connector = drm_atomic_get_new_connector_for_encoder(state, > >> + bridge->encoder); > >> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > >> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > >> + mode = &crtc_state->adjusted_mode; > >> + > >> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > >> + > >> + it6263_hdmi_avi_infoframe_configure(it, connector, mode); > > > > drm_atomic_helper_connector_hdmi_update_infoframes > > Will take a look at this. > > > > >> + > >> + /* HDMI AFE setup */ > >> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > >> + if (pclk_high) > >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > >> + AFE_XP_GAINBIT | AFE_XP_RESETB); > >> + else > >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > >> + AFE_XP_ER0 | AFE_XP_RESETB); > >> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > >> + if (pclk_high) > >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > >> + AFE_IP_GAINBIT | AFE_IP_RESETB); > >> + else > >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > >> + AFE_IP_ER0 | AFE_IP_RESETB); > >> + > >> + /* HDMI software video reset */ > >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > >> + fsleep(1000); > >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > >> + > >> + /* reconfigure LVDS and retry several times in case video is instable */ > >> + for (i = 0; i < 3; i++) { > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > >> + val & TXVIDSTABLE, > >> + 20000, 500000); > >> + if (!ret) { > >> + is_stable = true; > >> + break; > >> + } > >> + > >> + it6263_lvds_config(it); > >> + } > >> + > >> + if (!is_stable) > >> + dev_warn(it->dev, "failed to wait for video stable\n"); > >> + > >> + /* HDMI AFE reset release and power up */ > >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > >> + > >> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > >> + > >> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | REPEAT_PKT); > >> +} > >> + > >> +static enum drm_mode_status > >> +it6263_bridge_mode_valid(struct drm_bridge *bridge, > >> + const struct drm_display_info *info, > >> + const struct drm_display_mode *mode) > >> +{ > >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; > > > > rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB); > > return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, rate); > > Will look into the two lines. > > > > >> +} > >> + > >> +static int it6263_bridge_attach(struct drm_bridge *bridge, > >> + enum drm_bridge_attach_flags flags) > >> +{ > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + int ret; > >> + > >> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > >> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > >> + if (ret < 0) > >> + return ret; > >> + > >> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > >> + return 0; > >> + > >> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > >> + DRM_CONNECTOR_POLL_DISCONNECT; > >> + > > > > Please strongly consider dropping this and using drm_bridge_connector in > > the host driver. > > I can't afford to make i.MX8MP imx-lcdif KMS use drm_bridge_connector > currently. Maybe the Renesas RZ/G3E SMARC EVK Biju tested v1 patch > set with is also not using drm_bridge_connector. I hope we can leave > it as-is for now. At least you can use drm_bridge_connector in this driver rather than open-coding yet another connector implementation wich doesn't work with the next bridges. > > > > >> + ret = drm_connector_init(bridge->dev, &it->connector, > >> + &it6263_connector_funcs, > >> + DRM_MODE_CONNECTOR_HDMIA); > >> + if (ret) > >> + return ret; > >> + > >> + drm_connector_helper_add(&it->connector, > >> + &it6263_connector_helper_funcs); > >> + drm_connector_attach_encoder(&it->connector, bridge->encoder); > >> + > >> + return 0; > >> +} > >> + > >> +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge *bridge) > >> +{ > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + > >> + return it6263_detect(it); > >> +} > >> + > >> +static const struct drm_edid * > >> +it6263_bridge_edid_read(struct drm_bridge *bridge, > >> + struct drm_connector *connector) > >> +{ > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + > >> + return drm_edid_read_custom(connector, it6263_read_edid, it); > >> +} > >> + > >> +static u32 * > >> +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > >> + struct drm_bridge_state *bridge_state, > >> + struct drm_crtc_state *crtc_state, > >> + struct drm_connector_state *conn_state, > >> + u32 output_fmt, > >> + unsigned int *num_input_fmts) > >> +{ > >> + struct it6263 *it = bridge_to_it6263(bridge); > >> + u32 *input_fmts; > >> + > >> + *num_input_fmts = 0; > >> + > >> + if (it->lvds_link_num_dlanes == 3) > >> + return NULL; > >> + > >> + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > >> + if (!input_fmts) > >> + return NULL; > >> + > >> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > >> + *num_input_fmts = 1; > >> + > >> + return input_fmts; > >> +} > >> + > >> +static const struct drm_bridge_funcs it6263_bridge_funcs = { > >> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > >> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > >> + .atomic_reset = drm_atomic_helper_bridge_reset, > >> + .attach = it6263_bridge_attach, > >> + .mode_valid = it6263_bridge_mode_valid, > >> + .atomic_disable = it6263_bridge_atomic_disable, > >> + .atomic_enable = it6263_bridge_atomic_enable, > >> + .atomic_check = it6263_bridge_atomic_check, > >> + .detect = it6263_bridge_detect, > >> + .edid_read = it6263_bridge_edid_read, > >> + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, > >> +}; > >> + > >> +static int it6263_probe(struct i2c_client *client) > >> +{ > >> + struct device *dev = &client->dev; > >> + struct it6263 *it; > >> + int ret; > >> + > >> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > >> + if (!it) > >> + return -ENOMEM; > >> + > >> + it->dev = dev; > >> + it->hdmi_i2c = client; > >> + > >> + it->hdmi_regmap = devm_regmap_init_i2c(client, > >> + &it6263_hdmi_regmap_config); > >> + if (IS_ERR(it->hdmi_regmap)) > >> + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > >> + "failed to init I2C regmap for HDMI\n"); > >> + > >> + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > >> + if (IS_ERR(it->reset_gpio)) > >> + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > >> + "failed to get reset gpio\n"); > >> + > >> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > >> + it6263_supplies); > >> + if (ret) > >> + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > >> + > >> + ret = it6263_parse_dt(it); > >> + if (ret) > >> + return ret; > >> + > >> + it6263_hw_reset(it); > >> + > >> + ret = it6263_lvds_set_i2c_addr(it); > >> + if (ret) > >> + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > >> + > >> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > >> + LVDS_INPUT_CTRL_I2C_ADDR); > >> + if (IS_ERR(it->lvds_i2c)) > >> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > >> + "failed to allocate I2C device for LVDS\n"); > >> + > >> + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > >> + &it6263_lvds_regmap_config); > >> + if (IS_ERR(it->lvds_regmap)) > >> + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > >> + "failed to init I2C regmap for LVDS\n"); > >> + > >> + it6263_lvds_config(it); > >> + it6263_hdmi_config(it); > >> + > >> + i2c_set_clientdata(client, it); > >> + > >> + it->bridge.funcs = &it6263_bridge_funcs; > >> + it->bridge.of_node = dev->of_node; > >> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > > > > | DRM_BRIDGE_OP_HDMI > > Will take a look at this. > > > > > BTW: No HPD IRQ support? > IT6263 chip doesn't support HPD IRQ. ack > > > > >> + it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; > >> + drm_bridge_add(&it->bridge); > > > > devm_drm_bridge_add() > > Will try to use this. Thanks. > > > > >> + > >> + return 0; > >> +} > >> + > >> +static void it6263_remove(struct i2c_client *client) > >> +{ > >> + struct it6263 *it = i2c_get_clientdata(client); > >> + > >> + drm_bridge_remove(&it->bridge); > > > > Remove, it becomes unused with the devm_ function. > > > >> +} > >> + > >> +static const struct of_device_id it6263_of_match[] = { > >> + { .compatible = "ite,it6263", }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(of, it6263_of_match); > >> + > >> +static const struct i2c_device_id it6263_i2c_ids[] = { > >> + { "it6263", 0 }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > >> + > >> +static struct i2c_driver it6263_driver = { > >> + .probe = it6263_probe, > >> + .remove = it6263_remove, > >> + .driver = { > >> + .name = "it6263", > >> + .of_match_table = it6263_of_match, > >> + }, > >> + .id_table = it6263_i2c_ids, > >> +}; > >> +module_i2c_driver(it6263_driver); > >> + > >> +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > >> +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); > >> +MODULE_LICENSE("GPL"); > >> -- > >> 2.34.1 > >> > > > > -- > Regards, > Liu Ying >
On Sun, Oct 13, 2024 at 10:48:54AM +0000, Biju Das wrote: > Hi Liu Ying, > > > -----Original Message----- > > From: Liu Ying <victor.liu@nxp.com> > > Sent: Saturday, October 12, 2024 11:02 AM > > To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Cc: dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > > Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > > > On 10/12/2024, Dmitry Baryshkov wrote: > > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > > >> Add basic HDMI video output support. Currently, only RGB888 output > > >> pixel format is supported. At the LVDS input side, the driver > > >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS > > >> mapping. > > >> > > >> Product link: > > >> https://www.ite.com.tw/en/product/cate1/IT6263 > > >> > > >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > > >> --- > > >> v2: > > >> * Add AVI inforframe support. (Maxime) > > > > > > Maxime asked to wire up the HDMI Connector framework. I have pushed > > > the patch that converts lt9611.c driver. Please implement similar > > > changes in your driver. > > > > Hmm, didn't fully get the meaning of "the new HDMI bridge infrastructure" > > maxime asked. Ok, will take a look at lt9611.c. > > > > > > > >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > > >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) > > >> * Check number of LVDS link data lanes. (Biju) > > >> > > >> drivers/gpu/drm/bridge/Kconfig | 8 + > > >> drivers/gpu/drm/bridge/Makefile | 1 + > > >> drivers/gpu/drm/bridge/ite-it6263.c | 919 > > >> ++++++++++++++++++++++++++++ > > >> 3 files changed, 928 insertions(+) > > >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > >> > > >> diff --git a/drivers/gpu/drm/bridge/Kconfig > > >> b/drivers/gpu/drm/bridge/Kconfig index 3eb955333c80..93f99682a090 > > >> 100644 > > >> --- a/drivers/gpu/drm/bridge/Kconfig > > >> +++ b/drivers/gpu/drm/bridge/Kconfig > > >> @@ -90,6 +90,14 @@ config DRM_FSL_LDB > > >> help > > >> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > >> > > >> +config DRM_ITE_IT6263 > > >> + tristate "ITE IT6263 LVDS/HDMI bridge" > > >> + depends on OF > > >> + select DRM_KMS_HELPER > > >> + select REGMAP_I2C > > >> + help > > >> + ITE IT6263 LVDS to HDMI bridge chip driver. > > >> + > > >> config DRM_ITE_IT6505 > > >> tristate "ITE IT6505 DisplayPort bridge" > > >> depends on OF > > >> diff --git a/drivers/gpu/drm/bridge/Makefile > > >> b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd > > >> 100644 > > >> --- a/drivers/gpu/drm/bridge/Makefile > > >> +++ b/drivers/gpu/drm/bridge/Makefile > > >> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += > > >> chrontel-ch7033.o > > >> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > > >> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > >> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > > >> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > > >> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > > >> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > > >> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git > > >> a/drivers/gpu/drm/bridge/ite-it6263.c > > >> b/drivers/gpu/drm/bridge/ite-it6263.c > > >> new file mode 100644 > > >> index 000000000000..9b3318792f15 > > >> --- /dev/null > > >> +++ b/drivers/gpu/drm/bridge/ite-it6263.c > > >> @@ -0,0 +1,919 @@ > > >> +// SPDX-License-Identifier: GPL-2.0 > > >> +/* > > >> + * Copyright 2024 NXP > > >> + */ > > >> + > > >> +#include <linux/bitfield.h> > > >> +#include <linux/bits.h> > > >> +#include <linux/delay.h> > > >> +#include <linux/gpio/consumer.h> > > >> +#include <linux/hdmi.h> > > >> +#include <linux/i2c.h> > > >> +#include <linux/media-bus-format.h> > > >> +#include <linux/module.h> > > >> +#include <linux/of.h> > > >> +#include <linux/regmap.h> > > >> +#include <linux/regulator/consumer.h> > > >> + > > >> +#include <drm/drm_atomic.h> > > >> +#include <drm/drm_atomic_helper.h> > > >> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > > >> +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > > >> +<drm/drm_edid.h> #include <drm/drm_of.h> #include > > >> +<drm/drm_probe_helper.h> > > >> + > > >> +/* > > >> +-------------------------------------------------------------------- > > >> +--------- > > >> + * LVDS registers > > >> + */ > > >> + > > >> +/* LVDS software reset registers */ > > >> +#define LVDS_REG_05 0x05 > > >> +#define REG_SOFT_P_RST BIT(1) > > >> + > > >> +/* LVDS system configuration registers */ > > >> +/* 0x0b */ > > >> +#define LVDS_REG_0B 0x0b > > >> +#define REG_SSC_PCLK_RF BIT(0) > > >> +#define REG_LVDS_IN_SWAP BIT(1) > > >> + > > >> +/* LVDS test pattern gen control registers */ > > >> +/* 0x2c */ > > >> +#define LVDS_REG_2C 0x2c > > >> +#define REG_COL_DEP GENMASK(1, 0) > > >> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > > >> +#define OUT_MAP BIT(4) > > >> +#define JEIDA 0 > > >> +#define REG_DESSC_ENB BIT(6) > > >> +#define DMODE BIT(7) > > >> +#define DISO BIT(7) > > >> +#define SISO 0 > > >> + > > >> +#define LVDS_REG_3C 0x3c > > >> +#define LVDS_REG_3F 0x3f > > >> +#define LVDS_REG_47 0x47 > > >> +#define LVDS_REG_48 0x48 > > >> +#define LVDS_REG_4F 0x4f > > >> +#define LVDS_REG_52 0x52 > > >> + > > >> +/* > > >> +-------------------------------------------------------------------- > > >> +--------- > > >> + * HDMI registers are separated into three banks: > > >> + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > > >> + > > >> +/* HDMI genernal registers */ > > >> +#define HDMI_REG_SW_RST 0x04 > > >> +#define SOFTREF_RST BIT(5) > > >> +#define SOFTA_RST BIT(4) > > >> +#define SOFTV_RST BIT(3) > > >> +#define AUD_RST BIT(2) > > >> +#define HDCP_RST BIT(0) > > >> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > > >> + AUD_RST | HDCP_RST) > > >> + > > >> +#define HDMI_REG_SYS_STATUS 0x0e > > >> +#define HPDETECT BIT(6) > > >> +#define TXVIDSTABLE BIT(4) > > >> + > > >> +#define HDMI_REG_BANK_CTRL 0x0f > > >> +#define REG_BANK_SEL BIT(0) > > >> + > > >> +/* HDMI System DDC control registers */ > > >> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > > >> +#define MASTER_SEL_HOST BIT(0) > > >> + > > >> +#define HDMI_REG_DDC_HEADER 0x11 > > >> + > > >> +#define HDMI_REG_DDC_REQOFF 0x12 > > >> +#define HDMI_REG_DDC_REQCOUNT 0x13 > > >> +#define HDMI_REG_DDC_EDIDSEG 0x14 > > >> + > > >> +#define HDMI_REG_DDC_CMD 0x15 > > >> +#define DDC_CMD_EDID_READ 0x3 > > >> +#define DDC_CMD_FIFO_CLR 0x9 > > >> + > > >> +#define HDMI_REG_DDC_STATUS 0x16 > > >> +#define DDC_DONE BIT(7) > > >> +#define DDC_NOACK BIT(5) > > >> +#define DDC_WAITBUS BIT(4) > > >> +#define DDC_ARBILOSE BIT(3) > > >> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > > >> + > > >> +#define HDMI_DDC_FIFO_BYTES 32 > > >> +#define HDMI_REG_DDC_READFIFO 0x17 > > >> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > > >> +#define HDMI_REG_LVDS_PORT_EN 0x1e > > >> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > > >> + > > >> +/* > > >> +-------------------------------------------------------------------- > > >> +--------- > > >> + * 2) HDMI register bank0: 0x30 ~ 0xff */ > > >> + > > >> +/* HDMI AFE registers */ > > >> +#define HDMI_REG_AFE_DRV_CTRL 0x61 > > >> +#define AFE_DRV_PWD BIT(5) > > >> +#define AFE_DRV_RST BIT(4) > > >> + > > >> +#define HDMI_REG_AFE_XP_CTRL 0x62 > > >> +#define AFE_XP_GAINBIT BIT(7) > > >> +#define AFE_XP_ER0 BIT(4) > > >> +#define AFE_XP_RESETB BIT(3) > > >> + > > >> +#define HDMI_REG_AFE_ISW_CTRL 0x63 > > >> + > > >> +#define HDMI_REG_AFE_IP_CTRL 0x64 > > >> +#define AFE_IP_GAINBIT BIT(7) > > >> +#define AFE_IP_ER0 BIT(3) > > >> +#define AFE_IP_RESETB BIT(2) > > >> + > > >> +/* HDMI input data format registers */ > > >> +#define HDMI_REG_INPUT_MODE 0x70 > > >> +#define IN_RGB 0x00 > > >> + > > >> +/* HDMI general control registers */ > > >> +#define HDMI_REG_HDMI_MODE 0xc0 > > >> +#define TX_HDMI_MODE BIT(0) > > >> + > > >> +#define HDMI_REG_GCP 0xc1 > > >> +#define AVMUTE BIT(0) > > >> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > > >> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > > >> + > > >> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > > >> +#define ENABLE_PKT BIT(0) > > >> +#define REPEAT_PKT BIT(1) > > >> + > > >> +/* > > >> +-------------------------------------------------------------------- > > >> +--------- > > >> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > > >> + > > >> +/* AVI packet registers */ > > >> +#define HDMI_REG_AVI_DB1 0x158 > > >> +#define HDMI_REG_AVI_DB2 0x159 > > >> +#define HDMI_REG_AVI_DB3 0x15a > > >> +#define HDMI_REG_AVI_DB4 0x15b > > >> +#define HDMI_REG_AVI_DB5 0x15c > > >> +#define HDMI_REG_AVI_CSUM 0x15d > > >> +#define HDMI_REG_AVI_DB6 0x15e > > >> +#define HDMI_REG_AVI_DB7 0x15f > > >> +#define HDMI_REG_AVI_DB8 0x160 > > >> +#define HDMI_REG_AVI_DB9 0x161 > > >> +#define HDMI_REG_AVI_DB10 0x162 > > >> +#define HDMI_REG_AVI_DB11 0x163 > > >> +#define HDMI_REG_AVI_DB12 0x164 > > >> +#define HDMI_REG_AVI_DB13 0x165 > > >> + > > >> +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) > > >> +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) > > >> + > > >> +#define MAX_PIXEL_CLOCK_KHZ 150000 > > >> +#define HIGH_PIXEL_CLOCK_KHZ 80000 > > >> + > > >> +struct it6263 { > > >> + struct device *dev; > > >> + struct i2c_client *hdmi_i2c; > > >> + struct i2c_client *lvds_i2c; > > >> + struct regmap *hdmi_regmap; > > >> + struct regmap *lvds_regmap; > > >> + struct drm_bridge bridge; > > >> + struct drm_bridge *next_bridge; > > >> + struct drm_connector connector; > > >> + struct gpio_desc *reset_gpio; > > >> + u8 lvds_link_num_dlanes; > > >> + bool lvds_dual_link; > > >> + bool lvds_link12_swap; > > >> +}; > > >> + > > >> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > > >> +*bridge) { > > >> + return container_of(bridge, struct it6263, bridge); } > > >> + > > >> +static inline struct it6263 *connector_to_it6263(struct > > >> +drm_connector *conn) { > > >> + return container_of(conn, struct it6263, connector); } > > >> + > > >> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned > > >> +int reg) { > > >> + switch (reg) { > > >> + case HDMI_REG_SW_RST: > > >> + case HDMI_REG_BANK_CTRL: > > >> + case HDMI_REG_DDC_MASTER_CTRL: > > >> + case HDMI_REG_DDC_HEADER: > > >> + case HDMI_REG_DDC_REQOFF: > > >> + case HDMI_REG_DDC_REQCOUNT: > > >> + case HDMI_REG_DDC_EDIDSEG: > > >> + case HDMI_REG_DDC_CMD: > > >> + case HDMI_REG_LVDS_PORT: > > >> + case HDMI_REG_LVDS_PORT_EN: > > >> + case HDMI_REG_AFE_DRV_CTRL: > > >> + case HDMI_REG_AFE_XP_CTRL: > > >> + case HDMI_REG_AFE_ISW_CTRL: > > >> + case HDMI_REG_AFE_IP_CTRL: > > >> + case HDMI_REG_INPUT_MODE: > > >> + case HDMI_REG_HDMI_MODE: > > >> + case HDMI_REG_GCP: > > >> + case HDMI_REG_PKT_GENERAL_CTRL: > > >> + case HDMI_REG_AVI_DB1: > > >> + case HDMI_REG_AVI_DB2: > > >> + case HDMI_REG_AVI_DB3: > > >> + case HDMI_REG_AVI_DB4: > > >> + case HDMI_REG_AVI_DB5: > > >> + case HDMI_REG_AVI_CSUM: > > >> + case HDMI_REG_AVI_DB6: > > >> + case HDMI_REG_AVI_DB7: > > >> + case HDMI_REG_AVI_DB8: > > >> + case HDMI_REG_AVI_DB9: > > >> + case HDMI_REG_AVI_DB10: > > >> + case HDMI_REG_AVI_DB11: > > >> + case HDMI_REG_AVI_DB12: > > >> + case HDMI_REG_AVI_DB13: > > >> + return true; > > >> + default: > > >> + return false; > > >> + } > > >> +} > > >> + > > >> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned > > >> +int reg) { > > >> + if (it6263_hdmi_writeable_reg(dev, reg)) > > >> + return true; > > >> + > > >> + switch (reg) { > > >> + case HDMI_REG_SYS_STATUS: > > >> + case HDMI_REG_DDC_STATUS: > > >> + case HDMI_REG_DDC_READFIFO: > > >> + return true; > > >> + default: > > >> + return false; > > >> + } > > >> +} > > >> + > > >> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned > > >> +int reg) { > > >> + switch (reg) { > > >> + case HDMI_REG_SW_RST: > > >> + case HDMI_REG_SYS_STATUS: > > >> + case HDMI_REG_DDC_STATUS: > > >> + case HDMI_REG_DDC_READFIFO: > > >> + return true; > > >> + default: > > >> + return false; > > >> + } > > >> +} > > >> + > > >> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > > >> + .range_min = 0x00, > > >> + .range_max = HDMI_REG_AVI_DB13, > > >> + .selector_reg = HDMI_REG_BANK_CTRL, > > >> + .selector_mask = REG_BANK_SEL, > > >> + .selector_shift = 0, > > >> + .window_start = 0x00, > > >> + .window_len = 0x100, > > >> +}; > > >> + > > >> +static const struct regmap_config it6263_hdmi_regmap_config = { > > >> + .name = "it6263-hdmi", > > >> + .reg_bits = 8, > > >> + .val_bits = 8, > > >> + .writeable_reg = it6263_hdmi_writeable_reg, > > >> + .readable_reg = it6263_hdmi_readable_reg, > > >> + .volatile_reg = it6263_hdmi_volatile_reg, > > >> + .max_register = HDMI_REG_AVI_DB13, > > >> + .ranges = &it6263_hdmi_range_cfg, > > >> + .num_ranges = 1, > > >> + .cache_type = REGCACHE_MAPLE, > > >> +}; > > >> + > > >> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned > > >> +int reg) { > > >> + switch (reg) { > > >> + case LVDS_REG_05: > > >> + case LVDS_REG_0B: > > >> + case LVDS_REG_2C: > > >> + case LVDS_REG_3C: > > >> + case LVDS_REG_3F: > > >> + case LVDS_REG_47: > > >> + case LVDS_REG_48: > > >> + case LVDS_REG_4F: > > >> + case LVDS_REG_52: > > >> + return true; > > >> + default: > > >> + return false; > > >> + } > > >> +} > > >> + > > >> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned > > >> +int reg) { > > >> + return it6263_lvds_writeable_reg(dev, reg); } > > >> + > > >> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned > > >> +int reg) { > > >> + return reg == LVDS_REG_05; > > >> +} > > >> + > > >> +static const struct regmap_config it6263_lvds_regmap_config = { > > >> + .name = "it6263-lvds", > > >> + .reg_bits = 8, > > >> + .val_bits = 8, > > >> + .writeable_reg = it6263_lvds_writeable_reg, > > >> + .readable_reg = it6263_lvds_readable_reg, > > >> + .volatile_reg = it6263_lvds_volatile_reg, > > >> + .max_register = LVDS_REG_52, > > >> + .cache_type = REGCACHE_MAPLE, > > >> +}; > > >> + > > >> +static const char * const it6263_supplies[] = { > > >> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > > >> + "avcc", "anvdd", "apvdd" > > >> +}; > > >> + > > >> +static int it6263_parse_dt(struct it6263 *it) { > > >> + struct device *dev = it->dev; > > >> + struct device_node *port0, *port1; > > >> + int ret; > > >> + > > >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > > >> + &it->lvds_link_num_dlanes); > > >> + if (ret) { > > >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > > >> + ret); > > >> + return ret; > > >> + } > > >> + > > >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > > >> + if (IS_ERR(it->next_bridge)) > > >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > > >> + "failed to get next bridge\n"); > > >> + > > >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > > >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > > >> + if (port0 && port1) { > > >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > > >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > > >> + it->lvds_dual_link = true; > > >> + it->lvds_link12_swap = true; > > > > > > This is a nice name for the propery in the Dual Link LVDS case: > > > > > > ite,lvds-link-swap > > > > Swapping LVDS link1&2 is implied by the dual-lvds-{even,odd}-pixels properties that DT writers specify > > in port@0 and port@1. > > > > The DT writers don't need to use a dedicated property like ite,lvds-link-swap to explicitly indicate > > the swap. > > > > > > > > > > >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > > >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > > >> + it->lvds_dual_link = true; > > >> + } > > >> + > > >> + if (!it->lvds_dual_link) { > > >> + dev_err(dev, > > >> + "failed to get LVDS dual link pixel order\n"); > > >> + ret = -EINVAL; > > >> + } > > >> + } else if (port1) { > > >> + ret = -EINVAL; > > >> + dev_err(dev, "single input LVDS port1 is not supported\n"); > > >> + } else if (!port0) { > > >> + ret = -EINVAL; > > >> + dev_err(dev, "no input LVDS port\n"); > > >> + } > > >> + > > >> + of_node_put(port0); > > >> + of_node_put(port1); > > >> + > > >> + return ret; > > >> +} > > >> + > > >> +static inline void it6263_hw_reset(struct it6263 *it) { > > >> + if (!it->reset_gpio) > > >> + return; > > >> + > > >> + gpiod_set_value_cansleep(it->reset_gpio, 0); > > >> + fsleep(1000); > > >> + gpiod_set_value_cansleep(it->reset_gpio, 1); > > >> + /* The chip maker says the low pulse should be at least 40ms. */ > > >> + fsleep(40000); > > >> + gpiod_set_value_cansleep(it->reset_gpio, 0); > > >> + /* addtional time to wait the high voltage to be stable */ > > >> + fsleep(5000); > > >> +} > > >> + > > >> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > > >> + int ret; > > >> + > > >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > > >> + LVDS_INPUT_CTRL_I2C_ADDR << 1); > > >> + if (ret) > > >> + return ret; > > >> + > > >> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, > > >> +BIT(0)); } > > >> + > > >> +static inline void it6263_lvds_reset(struct it6263 *it) { > > >> + /* AFE PLL reset */ > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > > >> + fsleep(1000); > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > > >> + > > >> + /* software pixel clock domain reset */ > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > > >> + REG_SOFT_P_RST); > > >> + fsleep(1000); > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > > >> + fsleep(10000); > > >> +} > > >> + > > >> +static inline void it6263_lvds_set_interface(struct it6263 *it) { > > >> + /* color depth */ > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > > >> + /* output mapping */ > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > > >> + > > >> + if (it->lvds_dual_link) { > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > > >> + } else { > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > > >> + } > > >> +} > > >> + > > >> +static inline void it6263_lvds_set_afe(struct it6263 *it) { > > >> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > > >> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > > >> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > > >> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > > >> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > > >> + > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > > >> + REG_SSC_PCLK_RF); > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > > >> + REG_DESSC_ENB); > > >> +} > > >> + > > >> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > > >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > > >> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > > >> + > > >> +static inline void it6263_lvds_config(struct it6263 *it) { > > >> + it6263_lvds_reset(it); > > >> + it6263_lvds_set_interface(it); > > >> + it6263_lvds_set_afe(it); > > >> + it6263_lvds_sys_cfg(it); > > >> +} > > >> + > > >> +static inline void it6263_hdmi_config(struct it6263 *it) { > > >> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > > >> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > > >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > > >> + HDMI_COLOR_DEPTH_24); > > >> +} > > >> + > > >> +static enum drm_connector_status it6263_detect(struct it6263 *it) { > > >> + unsigned int val; > > >> + > > >> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > > >> + if (val & HPDETECT) > > >> + return connector_status_connected; > > >> + else > > >> + return connector_status_disconnected; } > > >> + > > >> +static enum drm_connector_status > > >> +it6263_connector_detect(struct drm_connector *connector, bool force) > > >> +{ > > >> + struct it6263 *it = connector_to_it6263(connector); > > >> + > > >> + return it6263_detect(it); > > >> +} > > >> + > > >> +static const struct drm_connector_funcs it6263_connector_funcs = { > > >> + .detect = it6263_connector_detect, > > >> + .fill_modes = drm_helper_probe_single_connector_modes, > > >> + .destroy = drm_connector_cleanup, > > >> + .reset = drm_atomic_helper_connector_reset, > > >> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > >> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > >> +}; > > >> + > > >> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > > >> +size_t len) { > > >> + struct it6263 *it = data; > > >> + struct regmap *regmap = it->hdmi_regmap; > > >> + unsigned int start = (block % 2) * EDID_LENGTH; > > >> + unsigned int segment = block >> 1; > > >> + unsigned int count, val; > > >> + int ret; > > >> + > > >> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > > >> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > > >> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > > >> + > > >> + while (len) { > > >> + /* clear DDC FIFO */ > > >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > > >> + > > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > > >> + val, val & DDC_DONE, > > >> + 2000, 10000); > > >> + if (ret) { > > >> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > > >> + return ret; > > >> + } > > >> + > > >> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > > >> + > > >> + /* fire the read command */ > > >> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > > >> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > > >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > > >> + > > >> + start += count; > > >> + len -= count; > > >> + > > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > > >> + val & (DDC_DONE | DDC_ERROR), > > >> + 20000, 250000); > > >> + if (ret && !(val & DDC_ERROR)) { > > >> + dev_err(it->dev, "failed to read EDID:%d\n", ret); > > >> + return ret; > > >> + } > > >> + > > >> + if (val & DDC_ERROR) { > > >> + dev_err(it->dev, "DDC error\n"); > > >> + return -EIO; > > >> + } > > >> + > > >> + /* cache to buffer */ > > >> + for (; count > 0; count--) { > > >> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > > >> + *(buf++) = val; > > >> + } > > >> + } > > >> + > > >> + return 0; > > >> +} > > >> + > > >> +static int it6263_connector_get_modes(struct drm_connector > > >> +*connector) { > > >> + struct it6263 *it = connector_to_it6263(connector); > > >> + const struct drm_edid *drm_edid; > > >> + int count; > > >> + > > >> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > > >> + > > >> + drm_edid_connector_update(connector, drm_edid); > > >> + count = drm_edid_connector_add_modes(connector); > > >> + > > >> + drm_edid_free(drm_edid); > > >> + > > >> + return count; > > >> +} > > >> + > > >> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > > >> + .get_modes = it6263_connector_get_modes, }; > > >> + > > >> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > > >> + struct drm_bridge_state *bridge_state, > > >> + struct drm_crtc_state *crtc_state, > > >> + struct drm_connector_state *conn_state) { > > >> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > > > > > Use drm_atomic_helper_connector_hdmi_check(). > > > > Will take a look at this. > > > > > > > > Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual > > > > Will take a look at this. > > > > > link LVDS have different max clock rates. Please correct me if I'm > > > wrong. > > > > Yes, I think so too. But, I don't know the exact max clock rates. > > IT6263 data sheet only says LVDS RX supports clock rate up to 150MHz. > > > > > > > > >> + > > >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > > >> + > > >> +static void > > >> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > > >> + struct drm_bridge_state *old_bridge_state) { > > >> + struct it6263 *it = bridge_to_it6263(bridge); > > >> + > > >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > > >> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > > >> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > > >> + AFE_DRV_RST | AFE_DRV_PWD); > > >> +} > > >> + > > >> +static void > > >> +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, > > >> + struct drm_connector *connector, > > >> + const struct drm_display_mode *mode) > > > > > > -> .hdmi_write_infoframe() , .hdmi_clear_infoframe(). > > > > > > Will take a look at them. > > > > > > > >> +{ > > >> + struct hdmi_avi_infoframe frame; > > >> + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; > > >> + int ret; > > >> + > > >> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); > > >> + if (ret) { > > >> + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); > > >> + return; > > >> + } > > >> + > > >> + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); > > >> + if (ret < 0) { > > >> + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); > > >> + return; > > >> + } > > >> + > > >> + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ > > >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, > > >> + &buf[HDMI_INFOFRAME_HEADER_SIZE], > > >> + HDMI_AVI_DB_CHUNK1_SIZE); > > >> + if (ret) { > > >> + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", > > >> + ret); > > >> + return; > > >> + } > > >> + > > >> + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ > > >> + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, > > >> + &buf[HDMI_INFOFRAME_HEADER_SIZE + > > >> + HDMI_AVI_DB_CHUNK1_SIZE], > > >> + HDMI_AVI_DB_CHUNK2_SIZE); > > >> + if (ret) { > > >> + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", > > >> + ret); > > >> + return; > > >> + } > > >> + > > >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); > > >> + if (ret) > > >> + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", > > >> + ret); > > >> +} > > >> + > > >> +static void > > >> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > > >> + struct drm_bridge_state *old_bridge_state) { > > >> + struct drm_atomic_state *state = old_bridge_state->base.state; > > >> + struct it6263 *it = bridge_to_it6263(bridge); > > >> + const struct drm_crtc_state *crtc_state; > > >> + struct regmap *regmap = it->hdmi_regmap; > > >> + const struct drm_display_mode *mode; > > >> + struct drm_connector *connector; > > >> + bool is_stable = false; > > >> + struct drm_crtc *crtc; > > >> + unsigned int val; > > >> + bool pclk_high; > > >> + int i, ret; > > >> + > > >> + connector = drm_atomic_get_new_connector_for_encoder(state, > > >> + bridge->encoder); > > >> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > > >> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > > >> + mode = &crtc_state->adjusted_mode; > > >> + > > >> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > > >> + > > >> + it6263_hdmi_avi_infoframe_configure(it, connector, mode); > > > > > > drm_atomic_helper_connector_hdmi_update_infoframes > > > > Will take a look at this. > > > > > > > >> + > > >> + /* HDMI AFE setup */ > > >> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > > >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > > >> + if (pclk_high) > > >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > > >> + AFE_XP_GAINBIT | AFE_XP_RESETB); > > >> + else > > >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > > >> + AFE_XP_ER0 | AFE_XP_RESETB); > > >> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > > >> + if (pclk_high) > > >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > > >> + AFE_IP_GAINBIT | AFE_IP_RESETB); > > >> + else > > >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > > >> + AFE_IP_ER0 | AFE_IP_RESETB); > > >> + > > >> + /* HDMI software video reset */ > > >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > > >> + fsleep(1000); > > >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > > >> + > > >> + /* reconfigure LVDS and retry several times in case video is instable */ > > >> + for (i = 0; i < 3; i++) { > > >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > > >> + val & TXVIDSTABLE, > > >> + 20000, 500000); > > >> + if (!ret) { > > >> + is_stable = true; > > >> + break; > > >> + } > > >> + > > >> + it6263_lvds_config(it); > > >> + } > > >> + > > >> + if (!is_stable) > > >> + dev_warn(it->dev, "failed to wait for video stable\n"); > > >> + > > >> + /* HDMI AFE reset release and power up */ > > >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > > >> + > > >> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > > >> + > > >> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > > >> +REPEAT_PKT); } > > >> + > > >> +static enum drm_mode_status > > >> +it6263_bridge_mode_valid(struct drm_bridge *bridge, > > >> + const struct drm_display_info *info, > > >> + const struct drm_display_mode *mode) { > > >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : > > >> +MODE_OK; > > > > > > rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB); > > > return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, > > > rate); > > > > Will look into the two lines. > > > > > > > >> +} > > >> + > > >> +static int it6263_bridge_attach(struct drm_bridge *bridge, > > >> + enum drm_bridge_attach_flags flags) { > > >> + struct it6263 *it = bridge_to_it6263(bridge); > > >> + int ret; > > >> + > > >> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > > >> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > >> + if (ret < 0) > > >> + return ret; > > >> + > > >> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > >> + return 0; > > >> + > > >> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > > >> + DRM_CONNECTOR_POLL_DISCONNECT; > > >> + > > > > > > Please strongly consider dropping this and using drm_bridge_connector > > > in the host driver. > > > > I can't afford to make i.MX8MP imx-lcdif KMS use drm_bridge_connector currently. Maybe the Renesas > > RZ/G3E SMARC EVK Biju tested v1 patch set with is also not using drm_bridge_connector. I hope we can > > leave it as-is for now. > > Renesas platform use the drm_bridge_connector_init() helper to create a drm_connector for > each output, instead of relying on the bridge drivers doing so. It attach > the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct > them not to create a connector. > > On Renesas platform, it exit from here > if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > return 0; > > Maybe it is good to have both cases to start with. Add support for both cases now, > Later when imx-lcdif KMS start using drm_bridge_connector, > we can start dropping bridge devices to create connector?? Do we have a timeline for this? > Dmitry, are you ok with this? If we can not requre DRM_BRIDGE_ATTACH_NO_CONNECTOR, my suggestion would be to use drm_bridge_connector from the bridge driver instead of open-coding yet another drm_connector implementation.
On Sun, Oct 13, 2024 at 10:27:39AM +0000, Biju Das wrote: > Hi Dmitry Baryshkov, > > > -----Original Message----- > > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Sent: Saturday, October 12, 2024 9:45 AM > > Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > > > Add basic HDMI video output support. Currently, only RGB888 output > > > pixel format is supported. At the LVDS input side, the driver > > > supports single LVDS link and dual LVDS links with "jeida-24" LVDS > > > mapping. > > > > > > Product link: > > > https://www.ite.com.tw/en/product/cate1/IT6263 > > > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > > --- > > > v2: > > > * Add AVI inforframe support. (Maxime) > > > > Maxime asked to wire up the HDMI Connector framework. I have pushed the patch that converts lt9611.c > > driver. Please implement similar changes in your driver. > > > > > * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > > > * Rename it6263_reset() to it6263_hw_reset(). (Biju) > > > * Check number of LVDS link data lanes. (Biju) > > > > > > drivers/gpu/drm/bridge/Kconfig | 8 + > > > drivers/gpu/drm/bridge/Makefile | 1 + > > > drivers/gpu/drm/bridge/ite-it6263.c | 919 > > > ++++++++++++++++++++++++++++ > > > 3 files changed, 928 insertions(+) > > > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig > > > b/drivers/gpu/drm/bridge/Kconfig index 3eb955333c80..93f99682a090 > > > 100644 > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > @@ -90,6 +90,14 @@ config DRM_FSL_LDB > > > help > > > Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > > > > > +config DRM_ITE_IT6263 > > > + tristate "ITE IT6263 LVDS/HDMI bridge" > > > + depends on OF > > > + select DRM_KMS_HELPER > > > + select REGMAP_I2C > > > + help > > > + ITE IT6263 LVDS to HDMI bridge chip driver. > > > + > > > config DRM_ITE_IT6505 > > > tristate "ITE IT6505 DisplayPort bridge" > > > depends on OF > > > diff --git a/drivers/gpu/drm/bridge/Makefile > > > b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd > > > 100644 > > > --- a/drivers/gpu/drm/bridge/Makefile > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > > obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > > > +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > > > obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > > > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > > > obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git > > > a/drivers/gpu/drm/bridge/ite-it6263.c > > > b/drivers/gpu/drm/bridge/ite-it6263.c > > > new file mode 100644 > > > index 000000000000..9b3318792f15 > > > --- /dev/null > > > +++ b/drivers/gpu/drm/bridge/ite-it6263.c > > > @@ -0,0 +1,919 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* > > > + * Copyright 2024 NXP > > > + */ > > > + > > > +#include <linux/bitfield.h> > > > +#include <linux/bits.h> > > > +#include <linux/delay.h> > > > +#include <linux/gpio/consumer.h> > > > +#include <linux/hdmi.h> > > > +#include <linux/i2c.h> > > > +#include <linux/media-bus-format.h> > > > +#include <linux/module.h> > > > +#include <linux/of.h> > > > +#include <linux/regmap.h> > > > +#include <linux/regulator/consumer.h> > > > + > > > +#include <drm/drm_atomic.h> > > > +#include <drm/drm_atomic_helper.h> > > > +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > > > +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > > > +<drm/drm_edid.h> #include <drm/drm_of.h> #include > > > +<drm/drm_probe_helper.h> > > > + > > > +/* > > > +--------------------------------------------------------------------- > > > +-------- > > > + * LVDS registers > > > + */ > > > + > > > +/* LVDS software reset registers */ > > > +#define LVDS_REG_05 0x05 > > > +#define REG_SOFT_P_RST BIT(1) > > > + > > > +/* LVDS system configuration registers */ > > > +/* 0x0b */ > > > +#define LVDS_REG_0B 0x0b > > > +#define REG_SSC_PCLK_RF BIT(0) > > > +#define REG_LVDS_IN_SWAP BIT(1) > > > + > > > +/* LVDS test pattern gen control registers */ > > > +/* 0x2c */ > > > +#define LVDS_REG_2C 0x2c > > > +#define REG_COL_DEP GENMASK(1, 0) > > > +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > > > +#define OUT_MAP BIT(4) > > > +#define JEIDA 0 > > > +#define REG_DESSC_ENB BIT(6) > > > +#define DMODE BIT(7) > > > +#define DISO BIT(7) > > > +#define SISO 0 > > > + > > > +#define LVDS_REG_3C 0x3c > > > +#define LVDS_REG_3F 0x3f > > > +#define LVDS_REG_47 0x47 > > > +#define LVDS_REG_48 0x48 > > > +#define LVDS_REG_4F 0x4f > > > +#define LVDS_REG_52 0x52 > > > + > > > +/* > > > +--------------------------------------------------------------------- > > > +-------- > > > + * HDMI registers are separated into three banks: > > > + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > > > + > > > +/* HDMI genernal registers */ > > > +#define HDMI_REG_SW_RST 0x04 > > > +#define SOFTREF_RST BIT(5) > > > +#define SOFTA_RST BIT(4) > > > +#define SOFTV_RST BIT(3) > > > +#define AUD_RST BIT(2) > > > +#define HDCP_RST BIT(0) > > > +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > > > + AUD_RST | HDCP_RST) > > > + > > > +#define HDMI_REG_SYS_STATUS 0x0e > > > +#define HPDETECT BIT(6) > > > +#define TXVIDSTABLE BIT(4) > > > + > > > +#define HDMI_REG_BANK_CTRL 0x0f > > > +#define REG_BANK_SEL BIT(0) > > > + > > > +/* HDMI System DDC control registers */ > > > +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > > > +#define MASTER_SEL_HOST BIT(0) > > > + > > > +#define HDMI_REG_DDC_HEADER 0x11 > > > + > > > +#define HDMI_REG_DDC_REQOFF 0x12 > > > +#define HDMI_REG_DDC_REQCOUNT 0x13 > > > +#define HDMI_REG_DDC_EDIDSEG 0x14 > > > + > > > +#define HDMI_REG_DDC_CMD 0x15 > > > +#define DDC_CMD_EDID_READ 0x3 > > > +#define DDC_CMD_FIFO_CLR 0x9 > > > + > > > +#define HDMI_REG_DDC_STATUS 0x16 > > > +#define DDC_DONE BIT(7) > > > +#define DDC_NOACK BIT(5) > > > +#define DDC_WAITBUS BIT(4) > > > +#define DDC_ARBILOSE BIT(3) > > > +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > > > + > > > +#define HDMI_DDC_FIFO_BYTES 32 > > > +#define HDMI_REG_DDC_READFIFO 0x17 > > > +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > > > +#define HDMI_REG_LVDS_PORT_EN 0x1e > > > +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > > > + > > > +/* > > > +--------------------------------------------------------------------- > > > +-------- > > > + * 2) HDMI register bank0: 0x30 ~ 0xff */ > > > + > > > +/* HDMI AFE registers */ > > > +#define HDMI_REG_AFE_DRV_CTRL 0x61 > > > +#define AFE_DRV_PWD BIT(5) > > > +#define AFE_DRV_RST BIT(4) > > > + > > > +#define HDMI_REG_AFE_XP_CTRL 0x62 > > > +#define AFE_XP_GAINBIT BIT(7) > > > +#define AFE_XP_ER0 BIT(4) > > > +#define AFE_XP_RESETB BIT(3) > > > + > > > +#define HDMI_REG_AFE_ISW_CTRL 0x63 > > > + > > > +#define HDMI_REG_AFE_IP_CTRL 0x64 > > > +#define AFE_IP_GAINBIT BIT(7) > > > +#define AFE_IP_ER0 BIT(3) > > > +#define AFE_IP_RESETB BIT(2) > > > + > > > +/* HDMI input data format registers */ > > > +#define HDMI_REG_INPUT_MODE 0x70 > > > +#define IN_RGB 0x00 > > > + > > > +/* HDMI general control registers */ > > > +#define HDMI_REG_HDMI_MODE 0xc0 > > > +#define TX_HDMI_MODE BIT(0) > > > + > > > +#define HDMI_REG_GCP 0xc1 > > > +#define AVMUTE BIT(0) > > > +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > > > +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > > > + > > > +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > > > +#define ENABLE_PKT BIT(0) > > > +#define REPEAT_PKT BIT(1) > > > + > > > +/* > > > +--------------------------------------------------------------------- > > > +-------- > > > + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > > > + > > > +/* AVI packet registers */ > > > +#define HDMI_REG_AVI_DB1 0x158 > > > +#define HDMI_REG_AVI_DB2 0x159 > > > +#define HDMI_REG_AVI_DB3 0x15a > > > +#define HDMI_REG_AVI_DB4 0x15b > > > +#define HDMI_REG_AVI_DB5 0x15c > > > +#define HDMI_REG_AVI_CSUM 0x15d > > > +#define HDMI_REG_AVI_DB6 0x15e > > > +#define HDMI_REG_AVI_DB7 0x15f > > > +#define HDMI_REG_AVI_DB8 0x160 > > > +#define HDMI_REG_AVI_DB9 0x161 > > > +#define HDMI_REG_AVI_DB10 0x162 > > > +#define HDMI_REG_AVI_DB11 0x163 > > > +#define HDMI_REG_AVI_DB12 0x164 > > > +#define HDMI_REG_AVI_DB13 0x165 > > > + > > > +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) > > > +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) > > > + > > > +#define MAX_PIXEL_CLOCK_KHZ 150000 > > > +#define HIGH_PIXEL_CLOCK_KHZ 80000 > > > + > > > +struct it6263 { > > > + struct device *dev; > > > + struct i2c_client *hdmi_i2c; > > > + struct i2c_client *lvds_i2c; > > > + struct regmap *hdmi_regmap; > > > + struct regmap *lvds_regmap; > > > + struct drm_bridge bridge; > > > + struct drm_bridge *next_bridge; > > > + struct drm_connector connector; > > > + struct gpio_desc *reset_gpio; > > > + u8 lvds_link_num_dlanes; > > > + bool lvds_dual_link; > > > + bool lvds_link12_swap; > > > +}; > > > + > > > +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > > > +*bridge) { > > > + return container_of(bridge, struct it6263, bridge); } > > > + > > > +static inline struct it6263 *connector_to_it6263(struct drm_connector > > > +*conn) { > > > + return container_of(conn, struct it6263, connector); } > > > + > > > +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned > > > +int reg) { > > > + switch (reg) { > > > + case HDMI_REG_SW_RST: > > > + case HDMI_REG_BANK_CTRL: > > > + case HDMI_REG_DDC_MASTER_CTRL: > > > + case HDMI_REG_DDC_HEADER: > > > + case HDMI_REG_DDC_REQOFF: > > > + case HDMI_REG_DDC_REQCOUNT: > > > + case HDMI_REG_DDC_EDIDSEG: > > > + case HDMI_REG_DDC_CMD: > > > + case HDMI_REG_LVDS_PORT: > > > + case HDMI_REG_LVDS_PORT_EN: > > > + case HDMI_REG_AFE_DRV_CTRL: > > > + case HDMI_REG_AFE_XP_CTRL: > > > + case HDMI_REG_AFE_ISW_CTRL: > > > + case HDMI_REG_AFE_IP_CTRL: > > > + case HDMI_REG_INPUT_MODE: > > > + case HDMI_REG_HDMI_MODE: > > > + case HDMI_REG_GCP: > > > + case HDMI_REG_PKT_GENERAL_CTRL: > > > + case HDMI_REG_AVI_DB1: > > > + case HDMI_REG_AVI_DB2: > > > + case HDMI_REG_AVI_DB3: > > > + case HDMI_REG_AVI_DB4: > > > + case HDMI_REG_AVI_DB5: > > > + case HDMI_REG_AVI_CSUM: > > > + case HDMI_REG_AVI_DB6: > > > + case HDMI_REG_AVI_DB7: > > > + case HDMI_REG_AVI_DB8: > > > + case HDMI_REG_AVI_DB9: > > > + case HDMI_REG_AVI_DB10: > > > + case HDMI_REG_AVI_DB11: > > > + case HDMI_REG_AVI_DB12: > > > + case HDMI_REG_AVI_DB13: > > > + return true; > > > + default: > > > + return false; > > > + } > > > +} > > > + > > > +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int > > > +reg) { > > > + if (it6263_hdmi_writeable_reg(dev, reg)) > > > + return true; > > > + > > > + switch (reg) { > > > + case HDMI_REG_SYS_STATUS: > > > + case HDMI_REG_DDC_STATUS: > > > + case HDMI_REG_DDC_READFIFO: > > > + return true; > > > + default: > > > + return false; > > > + } > > > +} > > > + > > > +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int > > > +reg) { > > > + switch (reg) { > > > + case HDMI_REG_SW_RST: > > > + case HDMI_REG_SYS_STATUS: > > > + case HDMI_REG_DDC_STATUS: > > > + case HDMI_REG_DDC_READFIFO: > > > + return true; > > > + default: > > > + return false; > > > + } > > > +} > > > + > > > +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > > > + .range_min = 0x00, > > > + .range_max = HDMI_REG_AVI_DB13, > > > + .selector_reg = HDMI_REG_BANK_CTRL, > > > + .selector_mask = REG_BANK_SEL, > > > + .selector_shift = 0, > > > + .window_start = 0x00, > > > + .window_len = 0x100, > > > +}; > > > + > > > +static const struct regmap_config it6263_hdmi_regmap_config = { > > > + .name = "it6263-hdmi", > > > + .reg_bits = 8, > > > + .val_bits = 8, > > > + .writeable_reg = it6263_hdmi_writeable_reg, > > > + .readable_reg = it6263_hdmi_readable_reg, > > > + .volatile_reg = it6263_hdmi_volatile_reg, > > > + .max_register = HDMI_REG_AVI_DB13, > > > + .ranges = &it6263_hdmi_range_cfg, > > > + .num_ranges = 1, > > > + .cache_type = REGCACHE_MAPLE, > > > +}; > > > + > > > +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned > > > +int reg) { > > > + switch (reg) { > > > + case LVDS_REG_05: > > > + case LVDS_REG_0B: > > > + case LVDS_REG_2C: > > > + case LVDS_REG_3C: > > > + case LVDS_REG_3F: > > > + case LVDS_REG_47: > > > + case LVDS_REG_48: > > > + case LVDS_REG_4F: > > > + case LVDS_REG_52: > > > + return true; > > > + default: > > > + return false; > > > + } > > > +} > > > + > > > +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int > > > +reg) { > > > + return it6263_lvds_writeable_reg(dev, reg); } > > > + > > > +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int > > > +reg) { > > > + return reg == LVDS_REG_05; > > > +} > > > + > > > +static const struct regmap_config it6263_lvds_regmap_config = { > > > + .name = "it6263-lvds", > > > + .reg_bits = 8, > > > + .val_bits = 8, > > > + .writeable_reg = it6263_lvds_writeable_reg, > > > + .readable_reg = it6263_lvds_readable_reg, > > > + .volatile_reg = it6263_lvds_volatile_reg, > > > + .max_register = LVDS_REG_52, > > > + .cache_type = REGCACHE_MAPLE, > > > +}; > > > + > > > +static const char * const it6263_supplies[] = { > > > + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > > > + "avcc", "anvdd", "apvdd" > > > +}; > > > + > > > +static int it6263_parse_dt(struct it6263 *it) { > > > + struct device *dev = it->dev; > > > + struct device_node *port0, *port1; > > > + int ret; > > > + > > > + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > > > + &it->lvds_link_num_dlanes); > > > + if (ret) { > > > + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > > > + ret); > > > + return ret; > > > + } > > > + > > > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > > > + if (IS_ERR(it->next_bridge)) > > > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > > > + "failed to get next bridge\n"); > > > + > > > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > > > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > > > + if (port0 && port1) { > > > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > > > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > > > + it->lvds_dual_link = true; > > > + it->lvds_link12_swap = true; > > > > This is a nice name for the propery in the Dual Link LVDS case: > > > > ite,lvds-link-swap > > > > > > > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > > > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > > > + it->lvds_dual_link = true; > > > + } > > > + > > > + if (!it->lvds_dual_link) { > > > + dev_err(dev, > > > + "failed to get LVDS dual link pixel order\n"); > > > + ret = -EINVAL; > > > + } > > > + } else if (port1) { > > > + ret = -EINVAL; > > > + dev_err(dev, "single input LVDS port1 is not supported\n"); > > > + } else if (!port0) { > > > + ret = -EINVAL; > > > + dev_err(dev, "no input LVDS port\n"); > > > + } > > > + > > > + of_node_put(port0); > > > + of_node_put(port1); > > > + > > > + return ret; > > > +} > > > + > > > +static inline void it6263_hw_reset(struct it6263 *it) { > > > + if (!it->reset_gpio) > > > + return; > > > + > > > + gpiod_set_value_cansleep(it->reset_gpio, 0); > > > + fsleep(1000); > > > + gpiod_set_value_cansleep(it->reset_gpio, 1); > > > + /* The chip maker says the low pulse should be at least 40ms. */ > > > + fsleep(40000); > > > + gpiod_set_value_cansleep(it->reset_gpio, 0); > > > + /* addtional time to wait the high voltage to be stable */ > > > + fsleep(5000); > > > +} > > > + > > > +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > > > + int ret; > > > + > > > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > > > + LVDS_INPUT_CTRL_I2C_ADDR << 1); > > > + if (ret) > > > + return ret; > > > + > > > + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); > > > +} > > > + > > > +static inline void it6263_lvds_reset(struct it6263 *it) { > > > + /* AFE PLL reset */ > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > > > + fsleep(1000); > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > > > + > > > + /* software pixel clock domain reset */ > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > > > + REG_SOFT_P_RST); > > > + fsleep(1000); > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > > > + fsleep(10000); > > > +} > > > + > > > +static inline void it6263_lvds_set_interface(struct it6263 *it) { > > > + /* color depth */ > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > > > + /* output mapping */ > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > > > + > > > + if (it->lvds_dual_link) { > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > > > + } else { > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > > > + } > > > +} > > > + > > > +static inline void it6263_lvds_set_afe(struct it6263 *it) { > > > + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > > > + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > > > + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > > > + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > > > + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > > > + > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > > > + REG_SSC_PCLK_RF); > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > > > + REG_DESSC_ENB); > > > +} > > > + > > > +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > > > + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > > > + > > > +static inline void it6263_lvds_config(struct it6263 *it) { > > > + it6263_lvds_reset(it); > > > + it6263_lvds_set_interface(it); > > > + it6263_lvds_set_afe(it); > > > + it6263_lvds_sys_cfg(it); > > > +} > > > + > > > +static inline void it6263_hdmi_config(struct it6263 *it) { > > > + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > > > + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > > > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > > > + HDMI_COLOR_DEPTH_24); > > > +} > > > + > > > +static enum drm_connector_status it6263_detect(struct it6263 *it) { > > > + unsigned int val; > > > + > > > + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > > > + if (val & HPDETECT) > > > + return connector_status_connected; > > > + else > > > + return connector_status_disconnected; } > > > + > > > +static enum drm_connector_status > > > +it6263_connector_detect(struct drm_connector *connector, bool force) > > > +{ > > > + struct it6263 *it = connector_to_it6263(connector); > > > + > > > + return it6263_detect(it); > > > +} > > > + > > > +static const struct drm_connector_funcs it6263_connector_funcs = { > > > + .detect = it6263_connector_detect, > > > + .fill_modes = drm_helper_probe_single_connector_modes, > > > + .destroy = drm_connector_cleanup, > > > + .reset = drm_atomic_helper_connector_reset, > > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > > +}; > > > + > > > +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > > > +size_t len) { > > > + struct it6263 *it = data; > > > + struct regmap *regmap = it->hdmi_regmap; > > > + unsigned int start = (block % 2) * EDID_LENGTH; > > > + unsigned int segment = block >> 1; > > > + unsigned int count, val; > > > + int ret; > > > + > > > + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > > > + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > > > + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > > > + > > > + while (len) { > > > + /* clear DDC FIFO */ > > > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > > > + > > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > > > + val, val & DDC_DONE, > > > + 2000, 10000); > > > + if (ret) { > > > + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > > > + return ret; > > > + } > > > + > > > + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > > > + > > > + /* fire the read command */ > > > + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > > > + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > > > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > > > + > > > + start += count; > > > + len -= count; > > > + > > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > > > + val & (DDC_DONE | DDC_ERROR), > > > + 20000, 250000); > > > + if (ret && !(val & DDC_ERROR)) { > > > + dev_err(it->dev, "failed to read EDID:%d\n", ret); > > > + return ret; > > > + } > > > + > > > + if (val & DDC_ERROR) { > > > + dev_err(it->dev, "DDC error\n"); > > > + return -EIO; > > > + } > > > + > > > + /* cache to buffer */ > > > + for (; count > 0; count--) { > > > + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > > > + *(buf++) = val; > > > + } > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static int it6263_connector_get_modes(struct drm_connector > > > +*connector) { > > > + struct it6263 *it = connector_to_it6263(connector); > > > + const struct drm_edid *drm_edid; > > > + int count; > > > + > > > + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > > > + > > > + drm_edid_connector_update(connector, drm_edid); > > > + count = drm_edid_connector_add_modes(connector); > > > + > > > + drm_edid_free(drm_edid); > > > + > > > + return count; > > > +} > > > + > > > +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > > > + .get_modes = it6263_connector_get_modes, }; > > > + > > > +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > > > + struct drm_bridge_state *bridge_state, > > > + struct drm_crtc_state *crtc_state, > > > + struct drm_connector_state *conn_state) { > > > + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > > > Use drm_atomic_helper_connector_hdmi_check(). > > > > Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual link LVDS have different max > > clock rates. Please correct me if I'm wrong. > > I guess this rate will be same for both links in dual lvds mode. > For single link, it supports only link0. > We cannot operate link1 its Own. > > From ITE point the max rate is rate corresponding to 1080p(148-150MHz) > > single and dual link LVDS have different max clock rates, but that constraint is > in SoC side?? ITE HW manual does not mention about this. Huh? I checked the datasheet, version 0.8. It specifies LVDS clock rate (not the mode clock) up to 150 MHz and HDMI rate up to 225 MHz. Please check both constraints. > > > > > > + > > > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > > > + [...] > > > + > > > + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > > > + &it6263_lvds_regmap_config); > > > + if (IS_ERR(it->lvds_regmap)) > > > + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > > > + "failed to init I2C regmap for LVDS\n"); > > > + > > > + it6263_lvds_config(it); > > > + it6263_hdmi_config(it); > > > + > > > + i2c_set_clientdata(client, it); > > > + > > > + it->bridge.funcs = &it6263_bridge_funcs; > > > + it->bridge.of_node = dev->of_node; > > > + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > > > > | DRM_BRIDGE_OP_HDMI > > > > BTW: No HPD IRQ support? > > Renesas SMARC RZ/G3E this signal is internal. No dedicted IRQ line > Populated for this signal. I don't know about NXP and any other platforms > has HPD wired to test the HPD IRQ support. > > Maybe go with poll method now and add hot plug support, > when we have platform with HPD to test. I'm fine with this. According to the datasheet it doesn't seem to have the IRQ pin at all. It's just surprising to me. It's be nice to mention that HW doesn't support HPD IRQ either before setting it->bridge.ops or in the commit message.
On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > Add basic HDMI video output support. Currently, only RGB888 output > pixel format is supported. At the LVDS input side, the driver > supports single LVDS link and dual LVDS links with "jeida-24" LVDS > mapping. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v2: > * Add AVI inforframe support. (Maxime) > * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > * Rename it6263_reset() to it6263_hw_reset(). (Biju) > * Check number of LVDS link data lanes. (Biju) > > drivers/gpu/drm/bridge/Kconfig | 8 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ > 3 files changed, 928 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > [...] > +static int it6263_parse_dt(struct it6263 *it) > +{ > + struct device *dev = it->dev; > + struct device_node *port0, *port1; > + int ret; > + > + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > + &it->lvds_link_num_dlanes); > + if (ret) { > + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > + ret); > + return ret; > + } > + > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > + if (IS_ERR(it->next_bridge)) > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > + "failed to get next bridge\n"); > + > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > + if (port0 && port1) { > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > + it->lvds_dual_link = true; > + it->lvds_link12_swap = true; > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > + it->lvds_dual_link = true; > + } > + > + if (!it->lvds_dual_link) { > + dev_err(dev, > + "failed to get LVDS dual link pixel order\n"); > + ret = -EINVAL; > + } Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that the DT definition is sound: one port for odd pixels, one port for even pixels. > + } else if (port1) { > + ret = -EINVAL; > + dev_err(dev, "single input LVDS port1 is not supported\n"); > + } else if (!port0) { > + ret = -EINVAL; > + dev_err(dev, "no input LVDS port\n"); > + } > + > + of_node_put(port0); > + of_node_put(port1); > + > + return ret; > +} > +
On 10/14/2024, Dmitry Baryshkov wrote: > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: >> Add basic HDMI video output support. Currently, only RGB888 output >> pixel format is supported. At the LVDS input side, the driver >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS >> mapping. >> >> Product link: >> https://www.ite.com.tw/en/product/cate1/IT6263 >> >> Signed-off-by: Liu Ying <victor.liu@nxp.com> >> --- >> v2: >> * Add AVI inforframe support. (Maxime) >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) >> * Check number of LVDS link data lanes. (Biju) >> >> drivers/gpu/drm/bridge/Kconfig | 8 + >> drivers/gpu/drm/bridge/Makefile | 1 + >> drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ >> 3 files changed, 928 insertions(+) >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c >> > > [...] > >> +static int it6263_parse_dt(struct it6263 *it) >> +{ >> + struct device *dev = it->dev; >> + struct device_node *port0, *port1; >> + int ret; >> + >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", >> + &it->lvds_link_num_dlanes); >> + if (ret) { >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", >> + ret); >> + return ret; >> + } >> + >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); >> + if (IS_ERR(it->next_bridge)) >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), >> + "failed to get next bridge\n"); >> + >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); >> + if (port0 && port1) { >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { >> + it->lvds_dual_link = true; >> + it->lvds_link12_swap = true; >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { >> + it->lvds_dual_link = true; >> + } >> + >> + if (!it->lvds_dual_link) { >> + dev_err(dev, >> + "failed to get LVDS dual link pixel order\n"); >> + ret = -EINVAL; >> + } > > Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that > the DT definition is sound: one port for odd pixels, one port for even > pixels. It cannot be used, because it get the pixel order for the LVDS source not sink. IT6263 is the LVDS sink. * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order * @port1: First DT port node of the Dual-link LVDS source * @port2: Second DT port node of the Dual-link LVDS source > >> + } else if (port1) { >> + ret = -EINVAL; >> + dev_err(dev, "single input LVDS port1 is not supported\n"); >> + } else if (!port0) { >> + ret = -EINVAL; >> + dev_err(dev, "no input LVDS port\n"); >> + } >> + >> + of_node_put(port0); >> + of_node_put(port1); >> + >> + return ret; >> +} >> + >
On Mon, Oct 14, 2024 at 03:18:15PM +0800, Liu Ying wrote: > On 10/14/2024, Dmitry Baryshkov wrote: > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > >> Add basic HDMI video output support. Currently, only RGB888 output > >> pixel format is supported. At the LVDS input side, the driver > >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS > >> mapping. > >> > >> Product link: > >> https://www.ite.com.tw/en/product/cate1/IT6263 > >> > >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >> --- > >> v2: > >> * Add AVI inforframe support. (Maxime) > >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) > >> * Check number of LVDS link data lanes. (Biju) > >> > >> drivers/gpu/drm/bridge/Kconfig | 8 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ > >> 3 files changed, 928 insertions(+) > >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >> > > > > [...] > > > >> +static int it6263_parse_dt(struct it6263 *it) > >> +{ > >> + struct device *dev = it->dev; > >> + struct device_node *port0, *port1; > >> + int ret; > >> + > >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > >> + &it->lvds_link_num_dlanes); > >> + if (ret) { > >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > >> + ret); > >> + return ret; > >> + } > >> + > >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > >> + if (IS_ERR(it->next_bridge)) > >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > >> + "failed to get next bridge\n"); > >> + > >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > >> + if (port0 && port1) { > >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > >> + it->lvds_dual_link = true; > >> + it->lvds_link12_swap = true; > >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > >> + it->lvds_dual_link = true; > >> + } > >> + > >> + if (!it->lvds_dual_link) { > >> + dev_err(dev, > >> + "failed to get LVDS dual link pixel order\n"); > >> + ret = -EINVAL; > >> + } > > > > Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that > > the DT definition is sound: one port for odd pixels, one port for even > > pixels. > > It cannot be used, because it get the pixel order for the LVDS > source not sink. IT6263 is the LVDS sink. Then you need a similar function for the sink side. Add it to the drm_of.c > > * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order > * @port1: First DT port node of the Dual-link LVDS source > * @port2: Second DT port node of the Dual-link LVDS source > > > > >> + } else if (port1) { > >> + ret = -EINVAL; > >> + dev_err(dev, "single input LVDS port1 is not supported\n"); > >> + } else if (!port0) { > >> + ret = -EINVAL; > >> + dev_err(dev, "no input LVDS port\n"); > >> + } > >> + > >> + of_node_put(port0); > >> + of_node_put(port1); > >> + > >> + return ret; > >> +} > >> + > > > > -- > Regards, > Liu Ying >
Hi Liu Ying, > -----Original Message----- > From: Liu Ying <victor.liu@nxp.com> > Sent: Monday, October 14, 2024 8:18 AM > Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > On 10/14/2024, Dmitry Baryshkov wrote: > > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > >> Add basic HDMI video output support. Currently, only RGB888 output > >> pixel format is supported. At the LVDS input side, the driver > >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS > >> mapping. > >> > >> Product link: > >> https://www.ite.com.tw/en/product/cate1/IT6263 > >> > >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >> --- > >> v2: > >> * Add AVI inforframe support. (Maxime) > >> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > >> * Rename it6263_reset() to it6263_hw_reset(). (Biju) > >> * Check number of LVDS link data lanes. (Biju) > >> > >> drivers/gpu/drm/bridge/Kconfig | 8 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/ite-it6263.c | 919 > >> ++++++++++++++++++++++++++++ > >> 3 files changed, 928 insertions(+) > >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >> > > > > [...] > > > >> +static int it6263_parse_dt(struct it6263 *it) { > >> + struct device *dev = it->dev; > >> + struct device_node *port0, *port1; > >> + int ret; > >> + > >> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > >> + &it->lvds_link_num_dlanes); > >> + if (ret) { > >> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > >> + ret); > >> + return ret; > >> + } > >> + > >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > >> + if (IS_ERR(it->next_bridge)) > >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > >> + "failed to get next bridge\n"); > >> + > >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > >> + if (port0 && port1) { > >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > >> + it->lvds_dual_link = true; > >> + it->lvds_link12_swap = true; > >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > >> + it->lvds_dual_link = true; > >> + } > >> + > >> + if (!it->lvds_dual_link) { > >> + dev_err(dev, > >> + "failed to get LVDS dual link pixel order\n"); > >> + ret = -EINVAL; > >> + } > > > > Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that > > the DT definition is sound: one port for odd pixels, one port for even > > pixels. > > It cannot be used, because it get the pixel order for the LVDS source not sink. IT6263 is the LVDS > sink. > > * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order > * @port1: First DT port node of the Dual-link LVDS source > * @port2: Second DT port node of the Dual-link LVDS source Can't you use drm_of_lvds_get_dual_link_pixel_order() from host for the same use case. See [1]? [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.c?h=next-20241011 lvds_bridge0: lvds-to-hdmi-bridge@4c { compatible = "ite,it6263"; reg = <0x4c>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dual-lvds-odd-pixels; lvds0_in0: endpoint@0 { remote-endpoint = <&lvds0_out>; }; }; port@1 { reg = <1>; dual-lvds-even-pixels; lvds0_in1: endpoint@1 { remote-endpoint = <&lvds1_out>; }; }; port@2 { reg = <2>; it6263_out: endpoint@2 { remote-endpoint = <&lvds_to_hdmi_con_out>; }; }; }; }; }; Cheers, Biju > > > > >> + } else if (port1) { > >> + ret = -EINVAL; > >> + dev_err(dev, "single input LVDS port1 is not supported\n"); > >> + } else if (!port0) { > >> + ret = -EINVAL; > >> + dev_err(dev, "no input LVDS port\n"); > >> + } > >> + > >> + of_node_put(port0); > >> + of_node_put(port1); > >> + > >> + return ret; > >> +} > >> + > > > > -- > Regards, > Liu Ying
On 10/14/2024, Dmitry Baryshkov wrote: > On Mon, Oct 14, 2024 at 03:18:15PM +0800, Liu Ying wrote: >> On 10/14/2024, Dmitry Baryshkov wrote: >>> On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: >>>> Add basic HDMI video output support. Currently, only RGB888 output >>>> pixel format is supported. At the LVDS input side, the driver >>>> supports single LVDS link and dual LVDS links with "jeida-24" LVDS >>>> mapping. >>>> >>>> Product link: >>>> https://www.ite.com.tw/en/product/cate1/IT6263 >>>> >>>> Signed-off-by: Liu Ying <victor.liu@nxp.com> >>>> --- >>>> v2: >>>> * Add AVI inforframe support. (Maxime) >>>> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) >>>> * Rename it6263_reset() to it6263_hw_reset(). (Biju) >>>> * Check number of LVDS link data lanes. (Biju) >>>> >>>> drivers/gpu/drm/bridge/Kconfig | 8 + >>>> drivers/gpu/drm/bridge/Makefile | 1 + >>>> drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ >>>> 3 files changed, 928 insertions(+) >>>> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c >>>> >>> >>> [...] >>> >>>> +static int it6263_parse_dt(struct it6263 *it) >>>> +{ >>>> + struct device *dev = it->dev; >>>> + struct device_node *port0, *port1; >>>> + int ret; >>>> + >>>> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", >>>> + &it->lvds_link_num_dlanes); >>>> + if (ret) { >>>> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", >>>> + ret); >>>> + return ret; >>>> + } >>>> + >>>> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); >>>> + if (IS_ERR(it->next_bridge)) >>>> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), >>>> + "failed to get next bridge\n"); >>>> + >>>> + port0 = of_graph_get_port_by_id(dev->of_node, 0); >>>> + port1 = of_graph_get_port_by_id(dev->of_node, 1); >>>> + if (port0 && port1) { >>>> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && >>>> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { >>>> + it->lvds_dual_link = true; >>>> + it->lvds_link12_swap = true; >>>> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && >>>> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { >>>> + it->lvds_dual_link = true; >>>> + } >>>> + >>>> + if (!it->lvds_dual_link) { >>>> + dev_err(dev, >>>> + "failed to get LVDS dual link pixel order\n"); >>>> + ret = -EINVAL; >>>> + } >>> >>> Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that >>> the DT definition is sound: one port for odd pixels, one port for even >>> pixels. >> >> It cannot be used, because it get the pixel order for the LVDS >> source not sink. IT6263 is the LVDS sink. > > Then you need a similar function for the sink side. Add it to the > drm_of.c How about getting remote LVDS source ports first and use drm_of_lvds_get_dual_link_pixel_order() like the snippet below? This way, no need to add a similar function or modify drm_of_lvds_get_dual_link_pixel_order() implementation. If you don't like this, can you please suggest a similar function name or maybe an additional parameter(with type and name) for drm_of_lvds_get_dual_link_pixel_order()? ---8<--- port0_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1); if (port0_ep) { remote_port0 = of_graph_get_remote_port(port0_ep); of_node_put(port0_ep); } port1_ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1); if (port1_ep) { remote_port1 = of_graph_get_remote_port(port1_ep); of_node_put(port1_ep); } if (remote_port0 && remote_port1) { order = drm_of_lvds_get_dual_link_pixel_order(remote_port0, remote_port1); if (order < 0) { dev_err(dev, "failed to get dual link pixel order: %d\n", order); ret = order; } else if (order == DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS) { it->lvds_dual_link = true; } else if (order == DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS) { it->lvds_dual_link = true; it->lvds_link12_swap = true; } } else if (remote_port1) { ret = -EINVAL; dev_err(dev, "single input LVDS port1 is not supported\n"); } else if (!remote_port0) { ret = -EINVAL; dev_err(dev, "no input LVDS port\n"); } of_node_put(remote_port0); of_node_put(remote_port1); ---8<--- > >> >> * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order >> * @port1: First DT port node of the Dual-link LVDS source >> * @port2: Second DT port node of the Dual-link LVDS source >> >>> >>>> + } else if (port1) { >>>> + ret = -EINVAL; >>>> + dev_err(dev, "single input LVDS port1 is not supported\n"); >>>> + } else if (!port0) { >>>> + ret = -EINVAL; >>>> + dev_err(dev, "no input LVDS port\n"); >>>> + } >>>> + >>>> + of_node_put(port0); >>>> + of_node_put(port1); >>>> + >>>> + return ret; >>>> +} >>>> + >>> >> >> -- >> Regards, >> Liu Ying >> >
On 10/14/2024, Biju Das wrote: > Hi Liu Ying, Hi Biju, > >> -----Original Message----- >> From: Liu Ying <victor.liu@nxp.com> >> Sent: Monday, October 14, 2024 8:18 AM >> Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter >> >> On 10/14/2024, Dmitry Baryshkov wrote: >>> On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: >>>> Add basic HDMI video output support. Currently, only RGB888 output >>>> pixel format is supported. At the LVDS input side, the driver >>>> supports single LVDS link and dual LVDS links with "jeida-24" LVDS >>>> mapping. >>>> >>>> Product link: >>>> https://www.ite.com.tw/en/product/cate1/IT6263 >>>> >>>> Signed-off-by: Liu Ying <victor.liu@nxp.com> >>>> --- >>>> v2: >>>> * Add AVI inforframe support. (Maxime) >>>> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) >>>> * Rename it6263_reset() to it6263_hw_reset(). (Biju) >>>> * Check number of LVDS link data lanes. (Biju) >>>> >>>> drivers/gpu/drm/bridge/Kconfig | 8 + >>>> drivers/gpu/drm/bridge/Makefile | 1 + >>>> drivers/gpu/drm/bridge/ite-it6263.c | 919 >>>> ++++++++++++++++++++++++++++ >>>> 3 files changed, 928 insertions(+) >>>> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c >>>> >>> >>> [...] >>> >>>> +static int it6263_parse_dt(struct it6263 *it) { >>>> + struct device *dev = it->dev; >>>> + struct device_node *port0, *port1; >>>> + int ret; >>>> + >>>> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", >>>> + &it->lvds_link_num_dlanes); >>>> + if (ret) { >>>> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", >>>> + ret); >>>> + return ret; >>>> + } >>>> + >>>> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); >>>> + if (IS_ERR(it->next_bridge)) >>>> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), >>>> + "failed to get next bridge\n"); >>>> + >>>> + port0 = of_graph_get_port_by_id(dev->of_node, 0); >>>> + port1 = of_graph_get_port_by_id(dev->of_node, 1); >>>> + if (port0 && port1) { >>>> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && >>>> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { >>>> + it->lvds_dual_link = true; >>>> + it->lvds_link12_swap = true; >>>> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && >>>> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { >>>> + it->lvds_dual_link = true; >>>> + } >>>> + >>>> + if (!it->lvds_dual_link) { >>>> + dev_err(dev, >>>> + "failed to get LVDS dual link pixel order\n"); >>>> + ret = -EINVAL; >>>> + } >>> >>> Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that >>> the DT definition is sound: one port for odd pixels, one port for even >>> pixels. >> >> It cannot be used, because it get the pixel order for the LVDS source not sink. IT6263 is the LVDS >> sink. >> >> * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order >> * @port1: First DT port node of the Dual-link LVDS source >> * @port2: Second DT port node of the Dual-link LVDS source > > > Can't you use drm_of_lvds_get_dual_link_pixel_order() from host for the same use case. See [1]? Yes, just need to get the remote LVDS source ports first. I just proposed a snippet in a separate reply to use this function. Let's see if Dmitry likes it or not. > > [1] > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.c?h=next-20241011 > > lvds_bridge0: lvds-to-hdmi-bridge@4c { > compatible = "ite,it6263"; > reg = <0x4c>; > ports { > #address-cells = <1>; > #size-cells = <0>; > > port@0 { > reg = <0>; > dual-lvds-odd-pixels; > lvds0_in0: endpoint@0 { > remote-endpoint = <&lvds0_out>; > }; > }; > > port@1 { > reg = <1>; > dual-lvds-even-pixels; > lvds0_in1: endpoint@1 { > remote-endpoint = <&lvds1_out>; > }; > }; > > port@2 { > reg = <2>; > it6263_out: endpoint@2 { > remote-endpoint = <&lvds_to_hdmi_con_out>; > }; > }; > }; > }; > }; > > Cheers, > Biju > > >> >>> >>>> + } else if (port1) { >>>> + ret = -EINVAL; >>>> + dev_err(dev, "single input LVDS port1 is not supported\n"); >>>> + } else if (!port0) { >>>> + ret = -EINVAL; >>>> + dev_err(dev, "no input LVDS port\n"); >>>> + } >>>> + >>>> + of_node_put(port0); >>>> + of_node_put(port1); >>>> + >>>> + return ret; >>>> +} >>>> + >>> >> >> -- >> Regards, >> Liu Ying >
On Mon, Oct 14, 2024 at 04:28:29PM +0800, Liu Ying wrote: > On 10/14/2024, Dmitry Baryshkov wrote: > > On Mon, Oct 14, 2024 at 03:18:15PM +0800, Liu Ying wrote: > >> On 10/14/2024, Dmitry Baryshkov wrote: > >>> On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote: > >>>> Add basic HDMI video output support. Currently, only RGB888 output > >>>> pixel format is supported. At the LVDS input side, the driver > >>>> supports single LVDS link and dual LVDS links with "jeida-24" LVDS > >>>> mapping. > >>>> > >>>> Product link: > >>>> https://www.ite.com.tw/en/product/cate1/IT6263 > >>>> > >>>> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >>>> --- > >>>> v2: > >>>> * Add AVI inforframe support. (Maxime) > >>>> * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) > >>>> * Rename it6263_reset() to it6263_hw_reset(). (Biju) > >>>> * Check number of LVDS link data lanes. (Biju) > >>>> > >>>> drivers/gpu/drm/bridge/Kconfig | 8 + > >>>> drivers/gpu/drm/bridge/Makefile | 1 + > >>>> drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ > >>>> 3 files changed, 928 insertions(+) > >>>> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >>>> > >>> > >>> [...] > >>> > >>>> +static int it6263_parse_dt(struct it6263 *it) > >>>> +{ > >>>> + struct device *dev = it->dev; > >>>> + struct device_node *port0, *port1; > >>>> + int ret; > >>>> + > >>>> + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", > >>>> + &it->lvds_link_num_dlanes); > >>>> + if (ret) { > >>>> + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", > >>>> + ret); > >>>> + return ret; > >>>> + } > >>>> + > >>>> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > >>>> + if (IS_ERR(it->next_bridge)) > >>>> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > >>>> + "failed to get next bridge\n"); > >>>> + > >>>> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > >>>> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > >>>> + if (port0 && port1) { > >>>> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > >>>> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > >>>> + it->lvds_dual_link = true; > >>>> + it->lvds_link12_swap = true; > >>>> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > >>>> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > >>>> + it->lvds_dual_link = true; > >>>> + } > >>>> + > >>>> + if (!it->lvds_dual_link) { > >>>> + dev_err(dev, > >>>> + "failed to get LVDS dual link pixel order\n"); > >>>> + ret = -EINVAL; > >>>> + } > >>> > >>> Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that > >>> the DT definition is sound: one port for odd pixels, one port for even > >>> pixels. > >> > >> It cannot be used, because it get the pixel order for the LVDS > >> source not sink. IT6263 is the LVDS sink. > > > > Then you need a similar function for the sink side. Add it to the > > drm_of.c > > How about getting remote LVDS source ports first and use > drm_of_lvds_get_dual_link_pixel_order() like the snippet below? > This way, no need to add a similar function or modify > drm_of_lvds_get_dual_link_pixel_order() implementation. > > If you don't like this, can you please suggest a similar function > name or maybe an additional parameter(with type and name) for > drm_of_lvds_get_dual_link_pixel_order()? > > ---8<--- > port0_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1); > if (port0_ep) { > remote_port0 = of_graph_get_remote_port(port0_ep); > of_node_put(port0_ep); > } > port1_ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1); > if (port1_ep) { > remote_port1 = of_graph_get_remote_port(port1_ep); > of_node_put(port1_ep); > } I think getting remotes just to get remotes back is a little bit clumsy. Adding drm_of_lvds_get_dual_link_pixel_order_sink() looks like a claner solution. > > if (remote_port0 && remote_port1) { > order = drm_of_lvds_get_dual_link_pixel_order(remote_port0, > remote_port1); > if (order < 0) { > dev_err(dev, > "failed to get dual link pixel order: %d\n", > order); > ret = order; > } else if (order == DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS) { > it->lvds_dual_link = true; > } else if (order == DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS) { > it->lvds_dual_link = true; > it->lvds_link12_swap = true; > } it->lvds_dual_link = true; order = drm_of_lvds_get_dual_link_pixel_order_sink(port0_ep, port1_ep); if (order < 0) { dev_err(...); ret = order; } else if (order == DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS) { it->lvds_link12_swap = true; } > } else if (remote_port1) { > ret = -EINVAL; > dev_err(dev, "single input LVDS port1 is not supported\n"); > } else if (!remote_port0) { > ret = -EINVAL; > dev_err(dev, "no input LVDS port\n"); > } > > of_node_put(remote_port0); > of_node_put(remote_port1); > ---8<--- > > > > >> > >> * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order > >> * @port1: First DT port node of the Dual-link LVDS source > >> * @port2: Second DT port node of the Dual-link LVDS source > >> > >>> > >>>> + } else if (port1) { > >>>> + ret = -EINVAL; > >>>> + dev_err(dev, "single input LVDS port1 is not supported\n"); > >>>> + } else if (!port0) { > >>>> + ret = -EINVAL; > >>>> + dev_err(dev, "no input LVDS port\n"); > >>>> + } > >>>> + > >>>> + of_node_put(port0); > >>>> + of_node_put(port1); > >>>> + > >>>> + return ret; > >>>> +} > >>>> + > >>> > >> > >> -- > >> Regards, > >> Liu Ying > >> > > > > -- > Regards, > Liu Ying >
Hi Liu, kernel test robot noticed the following build warnings: [auto build test WARNING on shawnguo/for-next] [also build test WARNING on arm64/for-next/core drm/drm-next drm-exynos/exynos-drm-next drm-intel/for-linux-next drm-intel/for-linux-next-fixes drm-misc/drm-misc-next drm-tip/drm-tip linus/master v6.12-rc3 next-20241014] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Liu-Ying/arm64-dts-imx8mp-skov-revb-mi1010ait-1cp1-Add-panel-timing-node-to-panel-node/20241012-154239 base: https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next patch link: https://lore.kernel.org/r/20241012073543.1388069-7-victor.liu%40nxp.com patch subject: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter config: i386-randconfig-052-20241015 (https://download.01.org/0day-ci/archive/20241015/202410151230.DwfMNFO5-lkp@intel.com/config) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202410151230.DwfMNFO5-lkp@intel.com/ cocci warnings: (new ones prefixed by >>) >> drivers/gpu/drm/bridge/ite-it6263.c:683:57-62: WARNING: conversion to bool not needed here vim +683 drivers/gpu/drm/bridge/ite-it6263.c 655 656 static void 657 it6263_bridge_atomic_enable(struct drm_bridge *bridge, 658 struct drm_bridge_state *old_bridge_state) 659 { 660 struct drm_atomic_state *state = old_bridge_state->base.state; 661 struct it6263 *it = bridge_to_it6263(bridge); 662 const struct drm_crtc_state *crtc_state; 663 struct regmap *regmap = it->hdmi_regmap; 664 const struct drm_display_mode *mode; 665 struct drm_connector *connector; 666 bool is_stable = false; 667 struct drm_crtc *crtc; 668 unsigned int val; 669 bool pclk_high; 670 int i, ret; 671 672 connector = drm_atomic_get_new_connector_for_encoder(state, 673 bridge->encoder); 674 crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; 675 crtc_state = drm_atomic_get_new_crtc_state(state, crtc); 676 mode = &crtc_state->adjusted_mode; 677 678 regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); 679 680 it6263_hdmi_avi_infoframe_configure(it, connector, mode); 681 682 /* HDMI AFE setup */ > 683 pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; 684 regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); 685 if (pclk_high) 686 regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, 687 AFE_XP_GAINBIT | AFE_XP_RESETB); 688 else 689 regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, 690 AFE_XP_ER0 | AFE_XP_RESETB); 691 regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); 692 if (pclk_high) 693 regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, 694 AFE_IP_GAINBIT | AFE_IP_RESETB); 695 else 696 regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, 697 AFE_IP_ER0 | AFE_IP_RESETB); 698 699 /* HDMI software video reset */ 700 regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); 701 fsleep(1000); 702 regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); 703 704 /* reconfigure LVDS and retry several times in case video is instable */ 705 for (i = 0; i < 3; i++) { 706 ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, 707 val & TXVIDSTABLE, 708 20000, 500000); 709 if (!ret) { 710 is_stable = true; 711 break; 712 } 713 714 it6263_lvds_config(it); 715 } 716 717 if (!is_stable) 718 dev_warn(it->dev, "failed to wait for video stable\n"); 719 720 /* HDMI AFE reset release and power up */ 721 regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); 722 723 regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); 724 725 regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | REPEAT_PKT); 726 } 727
On 10/14/2024, Dmitry Baryshkov wrote: [...] >>>> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, >>>> + struct drm_bridge_state *bridge_state, >>>> + struct drm_crtc_state *crtc_state, >>>> + struct drm_connector_state *conn_state) { >>>> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; >>> >>> Use drm_atomic_helper_connector_hdmi_check(). >>> >>> Implement .hdmi_tmds_char_rate_valid(). Also, I think, single and dual link LVDS have different max >>> clock rates. Please correct me if I'm wrong. >> >> I guess this rate will be same for both links in dual lvds mode. >> For single link, it supports only link0. >> We cannot operate link1 its Own. >> >> From ITE point the max rate is rate corresponding to 1080p(148-150MHz) >> >> single and dual link LVDS have different max clock rates, but that constraint is >> in SoC side?? ITE HW manual does not mention about this. > > Huh? I checked the datasheet, version 0.8. > It specifies LVDS clock rate (not the mode clock) up to 150 MHz and HDMI The datasheet says "Features(LVDS RX) * Support input clock rate up to 150MHz". The 150MHz is the mode clock rate which kind of matches the words "Features(Combined) * Support up to Full-HD/1080P and UXGA(1600x 1200) display format". LVDS serial clock rate is either x7 or x3.5 the mode clock rate, depending on single link or dual link. > rate up to 225 MHz. Please check both constraints. Will check both constraints. [...] >>>> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; >>> >>> | DRM_BRIDGE_OP_HDMI >>> >>> BTW: No HPD IRQ support? >> >> Renesas SMARC RZ/G3E this signal is internal. No dedicted IRQ line >> Populated for this signal. I don't know about NXP and any other platforms >> has HPD wired to test the HPD IRQ support. >> >> Maybe go with poll method now and add hot plug support, >> when we have platform with HPD to test. > > I'm fine with this. According to the datasheet it doesn't seem to have > the IRQ pin at all. It's just surprising to me. It's be nice to mention > that HW doesn't support HPD IRQ either before setting it->bridge.ops or > in the commit message. Will mention this before setting it->bridge.ops.
On 10/14/2024, Dmitry Baryshkov wrote: > On Sun, Oct 13, 2024 at 10:48:54AM +0000, Biju Das wrote: [...] >>>>> +static int it6263_bridge_attach(struct drm_bridge *bridge, >>>>> + enum drm_bridge_attach_flags flags) { >>>>> + struct it6263 *it = bridge_to_it6263(bridge); >>>>> + int ret; >>>>> + >>>>> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, >>>>> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) >>>>> + return 0; >>>>> + >>>>> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | >>>>> + DRM_CONNECTOR_POLL_DISCONNECT; >>>>> + >>>> >>>> Please strongly consider dropping this and using drm_bridge_connector >>>> in the host driver. >>> >>> I can't afford to make i.MX8MP imx-lcdif KMS use drm_bridge_connector currently. Maybe the Renesas >>> RZ/G3E SMARC EVK Biju tested v1 patch set with is also not using drm_bridge_connector. I hope we can >>> leave it as-is for now. >> >> Renesas platform use the drm_bridge_connector_init() helper to create a drm_connector for >> each output, instead of relying on the bridge drivers doing so. It attach >> the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct >> them not to create a connector. >> >> On Renesas platform, it exit from here >> if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) >> return 0; >> >> Maybe it is good to have both cases to start with. Add support for both cases now, >> Later when imx-lcdif KMS start using drm_bridge_connector, >> we can start dropping bridge devices to create connector?? > > Do we have a timeline for this? I sent out a patch series to make i.MX LCDIF driver use drm_bridge_connector just now. https://patchwork.freedesktop.org/series/140148/
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 3eb955333c80..93f99682a090 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -90,6 +90,14 @@ config DRM_FSL_LDB help Support for i.MX8MP DPI-to-LVDS on-SoC encoder. +config DRM_ITE_IT6263 + tristate "ITE IT6263 LVDS/HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + help + ITE IT6263 LVDS to HDMI bridge chip driver. + config DRM_ITE_IT6505 tristate "ITE IT6505 DisplayPort bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git a/drivers/gpu/drm/bridge/ite-it6263.c b/drivers/gpu/drm/bridge/ite-it6263.c new file mode 100644 index 000000000000..9b3318792f15 --- /dev/null +++ b/drivers/gpu/drm/bridge/ite-it6263.c @@ -0,0 +1,919 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2024 NXP + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/hdmi.h> +#include <linux/i2c.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_connector.h> +#include <drm/drm_crtc.h> +#include <drm/drm_edid.h> +#include <drm/drm_of.h> +#include <drm/drm_probe_helper.h> + +/* ----------------------------------------------------------------------------- + * LVDS registers + */ + +/* LVDS software reset registers */ +#define LVDS_REG_05 0x05 +#define REG_SOFT_P_RST BIT(1) + +/* LVDS system configuration registers */ +/* 0x0b */ +#define LVDS_REG_0B 0x0b +#define REG_SSC_PCLK_RF BIT(0) +#define REG_LVDS_IN_SWAP BIT(1) + +/* LVDS test pattern gen control registers */ +/* 0x2c */ +#define LVDS_REG_2C 0x2c +#define REG_COL_DEP GENMASK(1, 0) +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) +#define OUT_MAP BIT(4) +#define JEIDA 0 +#define REG_DESSC_ENB BIT(6) +#define DMODE BIT(7) +#define DISO BIT(7) +#define SISO 0 + +#define LVDS_REG_3C 0x3c +#define LVDS_REG_3F 0x3f +#define LVDS_REG_47 0x47 +#define LVDS_REG_48 0x48 +#define LVDS_REG_4F 0x4f +#define LVDS_REG_52 0x52 + +/* ----------------------------------------------------------------------------- + * HDMI registers are separated into three banks: + * 1) HDMI register common bank: 0x00 ~ 0x2f + */ + +/* HDMI genernal registers */ +#define HDMI_REG_SW_RST 0x04 +#define SOFTREF_RST BIT(5) +#define SOFTA_RST BIT(4) +#define SOFTV_RST BIT(3) +#define AUD_RST BIT(2) +#define HDCP_RST BIT(0) +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ + AUD_RST | HDCP_RST) + +#define HDMI_REG_SYS_STATUS 0x0e +#define HPDETECT BIT(6) +#define TXVIDSTABLE BIT(4) + +#define HDMI_REG_BANK_CTRL 0x0f +#define REG_BANK_SEL BIT(0) + +/* HDMI System DDC control registers */ +#define HDMI_REG_DDC_MASTER_CTRL 0x10 +#define MASTER_SEL_HOST BIT(0) + +#define HDMI_REG_DDC_HEADER 0x11 + +#define HDMI_REG_DDC_REQOFF 0x12 +#define HDMI_REG_DDC_REQCOUNT 0x13 +#define HDMI_REG_DDC_EDIDSEG 0x14 + +#define HDMI_REG_DDC_CMD 0x15 +#define DDC_CMD_EDID_READ 0x3 +#define DDC_CMD_FIFO_CLR 0x9 + +#define HDMI_REG_DDC_STATUS 0x16 +#define DDC_DONE BIT(7) +#define DDC_NOACK BIT(5) +#define DDC_WAITBUS BIT(4) +#define DDC_ARBILOSE BIT(3) +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) + +#define HDMI_DDC_FIFO_BYTES 32 +#define HDMI_REG_DDC_READFIFO 0x17 +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ +#define HDMI_REG_LVDS_PORT_EN 0x1e +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 + +/* ----------------------------------------------------------------------------- + * 2) HDMI register bank0: 0x30 ~ 0xff + */ + +/* HDMI AFE registers */ +#define HDMI_REG_AFE_DRV_CTRL 0x61 +#define AFE_DRV_PWD BIT(5) +#define AFE_DRV_RST BIT(4) + +#define HDMI_REG_AFE_XP_CTRL 0x62 +#define AFE_XP_GAINBIT BIT(7) +#define AFE_XP_ER0 BIT(4) +#define AFE_XP_RESETB BIT(3) + +#define HDMI_REG_AFE_ISW_CTRL 0x63 + +#define HDMI_REG_AFE_IP_CTRL 0x64 +#define AFE_IP_GAINBIT BIT(7) +#define AFE_IP_ER0 BIT(3) +#define AFE_IP_RESETB BIT(2) + +/* HDMI input data format registers */ +#define HDMI_REG_INPUT_MODE 0x70 +#define IN_RGB 0x00 + +/* HDMI general control registers */ +#define HDMI_REG_HDMI_MODE 0xc0 +#define TX_HDMI_MODE BIT(0) + +#define HDMI_REG_GCP 0xc1 +#define AVMUTE BIT(0) +#define HDMI_COLOR_DEPTH GENMASK(6, 4) +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) + +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 +#define ENABLE_PKT BIT(0) +#define REPEAT_PKT BIT(1) + +/* ----------------------------------------------------------------------------- + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) + */ + +/* AVI packet registers */ +#define HDMI_REG_AVI_DB1 0x158 +#define HDMI_REG_AVI_DB2 0x159 +#define HDMI_REG_AVI_DB3 0x15a +#define HDMI_REG_AVI_DB4 0x15b +#define HDMI_REG_AVI_DB5 0x15c +#define HDMI_REG_AVI_CSUM 0x15d +#define HDMI_REG_AVI_DB6 0x15e +#define HDMI_REG_AVI_DB7 0x15f +#define HDMI_REG_AVI_DB8 0x160 +#define HDMI_REG_AVI_DB9 0x161 +#define HDMI_REG_AVI_DB10 0x162 +#define HDMI_REG_AVI_DB11 0x163 +#define HDMI_REG_AVI_DB12 0x164 +#define HDMI_REG_AVI_DB13 0x165 + +#define HDMI_AVI_DB_CHUNK1_SIZE (HDMI_REG_AVI_DB5 - HDMI_REG_AVI_DB1 + 1) +#define HDMI_AVI_DB_CHUNK2_SIZE (HDMI_REG_AVI_DB13 - HDMI_REG_AVI_DB6 + 1) + +#define MAX_PIXEL_CLOCK_KHZ 150000 +#define HIGH_PIXEL_CLOCK_KHZ 80000 + +struct it6263 { + struct device *dev; + struct i2c_client *hdmi_i2c; + struct i2c_client *lvds_i2c; + struct regmap *hdmi_regmap; + struct regmap *lvds_regmap; + struct drm_bridge bridge; + struct drm_bridge *next_bridge; + struct drm_connector connector; + struct gpio_desc *reset_gpio; + u8 lvds_link_num_dlanes; + bool lvds_dual_link; + bool lvds_link12_swap; +}; + +static inline struct it6263 *bridge_to_it6263(struct drm_bridge *bridge) +{ + return container_of(bridge, struct it6263, bridge); +} + +static inline struct it6263 *connector_to_it6263(struct drm_connector *conn) +{ + return container_of(conn, struct it6263, connector); +} + +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case HDMI_REG_SW_RST: + case HDMI_REG_BANK_CTRL: + case HDMI_REG_DDC_MASTER_CTRL: + case HDMI_REG_DDC_HEADER: + case HDMI_REG_DDC_REQOFF: + case HDMI_REG_DDC_REQCOUNT: + case HDMI_REG_DDC_EDIDSEG: + case HDMI_REG_DDC_CMD: + case HDMI_REG_LVDS_PORT: + case HDMI_REG_LVDS_PORT_EN: + case HDMI_REG_AFE_DRV_CTRL: + case HDMI_REG_AFE_XP_CTRL: + case HDMI_REG_AFE_ISW_CTRL: + case HDMI_REG_AFE_IP_CTRL: + case HDMI_REG_INPUT_MODE: + case HDMI_REG_HDMI_MODE: + case HDMI_REG_GCP: + case HDMI_REG_PKT_GENERAL_CTRL: + case HDMI_REG_AVI_DB1: + case HDMI_REG_AVI_DB2: + case HDMI_REG_AVI_DB3: + case HDMI_REG_AVI_DB4: + case HDMI_REG_AVI_DB5: + case HDMI_REG_AVI_CSUM: + case HDMI_REG_AVI_DB6: + case HDMI_REG_AVI_DB7: + case HDMI_REG_AVI_DB8: + case HDMI_REG_AVI_DB9: + case HDMI_REG_AVI_DB10: + case HDMI_REG_AVI_DB11: + case HDMI_REG_AVI_DB12: + case HDMI_REG_AVI_DB13: + return true; + default: + return false; + } +} + +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int reg) +{ + if (it6263_hdmi_writeable_reg(dev, reg)) + return true; + + switch (reg) { + case HDMI_REG_SYS_STATUS: + case HDMI_REG_DDC_STATUS: + case HDMI_REG_DDC_READFIFO: + return true; + default: + return false; + } +} + +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case HDMI_REG_SW_RST: + case HDMI_REG_SYS_STATUS: + case HDMI_REG_DDC_STATUS: + case HDMI_REG_DDC_READFIFO: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { + .range_min = 0x00, + .range_max = HDMI_REG_AVI_DB13, + .selector_reg = HDMI_REG_BANK_CTRL, + .selector_mask = REG_BANK_SEL, + .selector_shift = 0, + .window_start = 0x00, + .window_len = 0x100, +}; + +static const struct regmap_config it6263_hdmi_regmap_config = { + .name = "it6263-hdmi", + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = it6263_hdmi_writeable_reg, + .readable_reg = it6263_hdmi_readable_reg, + .volatile_reg = it6263_hdmi_volatile_reg, + .max_register = HDMI_REG_AVI_DB13, + .ranges = &it6263_hdmi_range_cfg, + .num_ranges = 1, + .cache_type = REGCACHE_MAPLE, +}; + +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LVDS_REG_05: + case LVDS_REG_0B: + case LVDS_REG_2C: + case LVDS_REG_3C: + case LVDS_REG_3F: + case LVDS_REG_47: + case LVDS_REG_48: + case LVDS_REG_4F: + case LVDS_REG_52: + return true; + default: + return false; + } +} + +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int reg) +{ + return it6263_lvds_writeable_reg(dev, reg); +} + +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg == LVDS_REG_05; +} + +static const struct regmap_config it6263_lvds_regmap_config = { + .name = "it6263-lvds", + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = it6263_lvds_writeable_reg, + .readable_reg = it6263_lvds_readable_reg, + .volatile_reg = it6263_lvds_volatile_reg, + .max_register = LVDS_REG_52, + .cache_type = REGCACHE_MAPLE, +}; + +static const char * const it6263_supplies[] = { + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", + "avcc", "anvdd", "apvdd" +}; + +static int it6263_parse_dt(struct it6263 *it) +{ + struct device *dev = it->dev; + struct device_node *port0, *port1; + int ret; + + ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes", + &it->lvds_link_num_dlanes); + if (ret) { + dev_err(dev, "failed to get LVDS link number of data lanes: %d\n", + ret); + return ret; + } + + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); + if (IS_ERR(it->next_bridge)) + return dev_err_probe(dev, PTR_ERR(it->next_bridge), + "failed to get next bridge\n"); + + port0 = of_graph_get_port_by_id(dev->of_node, 0); + port1 = of_graph_get_port_by_id(dev->of_node, 1); + if (port0 && port1) { + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { + it->lvds_dual_link = true; + it->lvds_link12_swap = true; + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && + of_property_read_bool(port1, "dual-lvds-even-pixels")) { + it->lvds_dual_link = true; + } + + if (!it->lvds_dual_link) { + dev_err(dev, + "failed to get LVDS dual link pixel order\n"); + ret = -EINVAL; + } + } else if (port1) { + ret = -EINVAL; + dev_err(dev, "single input LVDS port1 is not supported\n"); + } else if (!port0) { + ret = -EINVAL; + dev_err(dev, "no input LVDS port\n"); + } + + of_node_put(port0); + of_node_put(port1); + + return ret; +} + +static inline void it6263_hw_reset(struct it6263 *it) +{ + if (!it->reset_gpio) + return; + + gpiod_set_value_cansleep(it->reset_gpio, 0); + fsleep(1000); + gpiod_set_value_cansleep(it->reset_gpio, 1); + /* The chip maker says the low pulse should be at least 40ms. */ + fsleep(40000); + gpiod_set_value_cansleep(it->reset_gpio, 0); + /* addtional time to wait the high voltage to be stable */ + fsleep(5000); +} + +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) +{ + int ret; + + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, + LVDS_INPUT_CTRL_I2C_ADDR << 1); + if (ret) + return ret; + + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); +} + +static inline void it6263_lvds_reset(struct it6263 *it) +{ + /* AFE PLL reset */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); + fsleep(1000); + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); + + /* software pixel clock domain reset */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, + REG_SOFT_P_RST); + fsleep(1000); + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); + fsleep(10000); +} + +static inline void it6263_lvds_set_interface(struct it6263 *it) +{ + /* color depth */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); + /* output mapping */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); + + if (it->lvds_dual_link) { + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); + } else { + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); + } +} + +static inline void it6263_lvds_set_afe(struct it6263 *it) +{ + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); + + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, + REG_SSC_PCLK_RF); + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, + REG_DESSC_ENB); +} + +static inline void it6263_lvds_sys_cfg(struct it6263 *it) +{ + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); +} + +static inline void it6263_lvds_config(struct it6263 *it) +{ + it6263_lvds_reset(it); + it6263_lvds_set_interface(it); + it6263_lvds_set_afe(it); + it6263_lvds_sys_cfg(it); +} + +static inline void it6263_hdmi_config(struct it6263 *it) +{ + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, + HDMI_COLOR_DEPTH_24); +} + +static enum drm_connector_status it6263_detect(struct it6263 *it) +{ + unsigned int val; + + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); + if (val & HPDETECT) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static enum drm_connector_status +it6263_connector_detect(struct drm_connector *connector, bool force) +{ + struct it6263 *it = connector_to_it6263(connector); + + return it6263_detect(it); +} + +static const struct drm_connector_funcs it6263_connector_funcs = { + .detect = it6263_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, size_t len) +{ + struct it6263 *it = data; + struct regmap *regmap = it->hdmi_regmap; + unsigned int start = (block % 2) * EDID_LENGTH; + unsigned int segment = block >> 1; + unsigned int count, val; + int ret; + + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); + + while (len) { + /* clear DDC FIFO */ + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); + + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, + val, val & DDC_DONE, + 2000, 10000); + if (ret) { + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); + return ret; + } + + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; + + /* fire the read command */ + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); + + start += count; + len -= count; + + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, + val & (DDC_DONE | DDC_ERROR), + 20000, 250000); + if (ret && !(val & DDC_ERROR)) { + dev_err(it->dev, "failed to read EDID:%d\n", ret); + return ret; + } + + if (val & DDC_ERROR) { + dev_err(it->dev, "DDC error\n"); + return -EIO; + } + + /* cache to buffer */ + for (; count > 0; count--) { + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); + *(buf++) = val; + } + } + + return 0; +} + +static int it6263_connector_get_modes(struct drm_connector *connector) +{ + struct it6263 *it = connector_to_it6263(connector); + const struct drm_edid *drm_edid; + int count; + + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); + + drm_edid_connector_update(connector, drm_edid); + count = drm_edid_connector_add_modes(connector); + + drm_edid_free(drm_edid); + + return count; +} + +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { + .get_modes = it6263_connector_get_modes, +}; + +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct drm_display_mode *mode = &crtc_state->adjusted_mode; + + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; +} + +static void +it6263_bridge_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct it6263 *it = bridge_to_it6263(bridge); + + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, + AFE_DRV_RST | AFE_DRV_PWD); +} + +static void +it6263_hdmi_avi_infoframe_configure(struct it6263 *it, + struct drm_connector *connector, + const struct drm_display_mode *mode) +{ + struct hdmi_avi_infoframe frame; + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; + int ret; + + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, connector, mode); + if (ret) { + dev_err(it->dev, "failed to setup AVI infoframe: %d\n", ret); + return; + } + + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); + if (ret < 0) { + dev_err(it->dev, "failed to pack infoframe: %d\n", ret); + return; + } + + /* write the first AVI infoframe data byte chunk(DB1-DB5) */ + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB1, + &buf[HDMI_INFOFRAME_HEADER_SIZE], + HDMI_AVI_DB_CHUNK1_SIZE); + if (ret) { + dev_err(it->dev, "failed to write the 1st AVI infoframe data byte chunk: %d\n", + ret); + return; + } + + /* write the second AVI infoframe data byte chunk(DB6-DB13) */ + ret = regmap_bulk_write(it->hdmi_regmap, HDMI_REG_AVI_DB6, + &buf[HDMI_INFOFRAME_HEADER_SIZE + + HDMI_AVI_DB_CHUNK1_SIZE], + HDMI_AVI_DB_CHUNK2_SIZE); + if (ret) { + dev_err(it->dev, "failed to write the 2nd AVI infoframe data byte chunk: %d\n", + ret); + return; + } + + ret = regmap_write(it->hdmi_regmap, HDMI_REG_AVI_CSUM, buf[3]); + if (ret) + dev_err(it->dev, "failed to set AVI infoframe checksum: %d\n", + ret); +} + +static void +it6263_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *state = old_bridge_state->base.state; + struct it6263 *it = bridge_to_it6263(bridge); + const struct drm_crtc_state *crtc_state; + struct regmap *regmap = it->hdmi_regmap; + const struct drm_display_mode *mode; + struct drm_connector *connector; + bool is_stable = false; + struct drm_crtc *crtc; + unsigned int val; + bool pclk_high; + int i, ret; + + connector = drm_atomic_get_new_connector_for_encoder(state, + bridge->encoder); + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + mode = &crtc_state->adjusted_mode; + + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); + + it6263_hdmi_avi_infoframe_configure(it, connector, mode); + + /* HDMI AFE setup */ + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); + if (pclk_high) + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, + AFE_XP_GAINBIT | AFE_XP_RESETB); + else + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, + AFE_XP_ER0 | AFE_XP_RESETB); + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); + if (pclk_high) + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, + AFE_IP_GAINBIT | AFE_IP_RESETB); + else + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, + AFE_IP_ER0 | AFE_IP_RESETB); + + /* HDMI software video reset */ + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); + fsleep(1000); + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); + + /* reconfigure LVDS and retry several times in case video is instable */ + for (i = 0; i < 3; i++) { + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, + val & TXVIDSTABLE, + 20000, 500000); + if (!ret) { + is_stable = true; + break; + } + + it6263_lvds_config(it); + } + + if (!is_stable) + dev_warn(it->dev, "failed to wait for video stable\n"); + + /* HDMI AFE reset release and power up */ + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); + + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); + + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | REPEAT_PKT); +} + +static enum drm_mode_status +it6263_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; +} + +static int it6263_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct it6263 *it = bridge_to_it6263(bridge); + int ret; + + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); + if (ret < 0) + return ret; + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) + return 0; + + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + + ret = drm_connector_init(bridge->dev, &it->connector, + &it6263_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) + return ret; + + drm_connector_helper_add(&it->connector, + &it6263_connector_helper_funcs); + drm_connector_attach_encoder(&it->connector, bridge->encoder); + + return 0; +} + +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge *bridge) +{ + struct it6263 *it = bridge_to_it6263(bridge); + + return it6263_detect(it); +} + +static const struct drm_edid * +it6263_bridge_edid_read(struct drm_bridge *bridge, + struct drm_connector *connector) +{ + struct it6263 *it = bridge_to_it6263(bridge); + + return drm_edid_read_custom(connector, it6263_read_edid, it); +} + +static u32 * +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + struct it6263 *it = bridge_to_it6263(bridge); + u32 *input_fmts; + + *num_input_fmts = 0; + + if (it->lvds_link_num_dlanes == 3) + return NULL; + + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); + if (!input_fmts) + return NULL; + + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; + *num_input_fmts = 1; + + return input_fmts; +} + +static const struct drm_bridge_funcs it6263_bridge_funcs = { + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .attach = it6263_bridge_attach, + .mode_valid = it6263_bridge_mode_valid, + .atomic_disable = it6263_bridge_atomic_disable, + .atomic_enable = it6263_bridge_atomic_enable, + .atomic_check = it6263_bridge_atomic_check, + .detect = it6263_bridge_detect, + .edid_read = it6263_bridge_edid_read, + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, +}; + +static int it6263_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct it6263 *it; + int ret; + + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); + if (!it) + return -ENOMEM; + + it->dev = dev; + it->hdmi_i2c = client; + + it->hdmi_regmap = devm_regmap_init_i2c(client, + &it6263_hdmi_regmap_config); + if (IS_ERR(it->hdmi_regmap)) + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), + "failed to init I2C regmap for HDMI\n"); + + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(it->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), + "failed to get reset gpio\n"); + + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), + it6263_supplies); + if (ret) + return dev_err_probe(dev, ret, "failed to get power supplies\n"); + + ret = it6263_parse_dt(it); + if (ret) + return ret; + + it6263_hw_reset(it); + + ret = it6263_lvds_set_i2c_addr(it); + if (ret) + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); + + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, + LVDS_INPUT_CTRL_I2C_ADDR); + if (IS_ERR(it->lvds_i2c)) + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), + "failed to allocate I2C device for LVDS\n"); + + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, + &it6263_lvds_regmap_config); + if (IS_ERR(it->lvds_regmap)) + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), + "failed to init I2C regmap for LVDS\n"); + + it6263_lvds_config(it); + it6263_hdmi_config(it); + + i2c_set_clientdata(client, it); + + it->bridge.funcs = &it6263_bridge_funcs; + it->bridge.of_node = dev->of_node; + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; + it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; + drm_bridge_add(&it->bridge); + + return 0; +} + +static void it6263_remove(struct i2c_client *client) +{ + struct it6263 *it = i2c_get_clientdata(client); + + drm_bridge_remove(&it->bridge); +} + +static const struct of_device_id it6263_of_match[] = { + { .compatible = "ite,it6263", }, + { } +}; +MODULE_DEVICE_TABLE(of, it6263_of_match); + +static const struct i2c_device_id it6263_i2c_ids[] = { + { "it6263", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); + +static struct i2c_driver it6263_driver = { + .probe = it6263_probe, + .remove = it6263_remove, + .driver = { + .name = "it6263", + .of_match_table = it6263_of_match, + }, + .id_table = it6263_i2c_ids, +}; +module_i2c_driver(it6263_driver); + +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); +MODULE_LICENSE("GPL");
Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v2: * Add AVI inforframe support. (Maxime) * Add DRM_MODE_CONNECTOR_HDMIA. (Biju) * Rename it6263_reset() to it6263_hw_reset(). (Biju) * Check number of LVDS link data lanes. (Biju) drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/ite-it6263.c | 919 ++++++++++++++++++++++++++++ 3 files changed, 928 insertions(+) create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c