diff mbox series

[4/5] phy: qcom-qusb2: Add support for QCS615

Message ID 20241014084432.3310114-5-quic_kriskura@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add support for primary USB controller on QCS615. | expand

Commit Message

Krishna Kurapati Oct. 14, 2024, 8:44 a.m. UTC 
Add init sequence and phy configuration for QCS615.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 29 +++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Comments

Dmitry Baryshkov Oct. 14, 2024, 11:01 a.m. UTC | #1 
On Mon, Oct 14, 2024 at 02:14:31PM +0530, Krishna Kurapati wrote:
> Add init sequence and phy configuration for QCS615.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qusb2.c | 29 +++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index c52655a383ce..227041e096bc 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -151,6 +151,19 @@ static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
>  	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
>  };
>  
> +static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = {
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xC8),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),

Lowcase hex numbers.

> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
> +};
> +
>  static const unsigned int ipq6018_regs_layout[] = {
>  	[QUSB2PHY_PLL_STATUS]              = 0x38,
>  	[QUSB2PHY_PORT_TUNE1]              = 0x80,
> @@ -331,6 +344,19 @@ static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
>  	.autoresume_en   = BIT(0),
>  };
>  
> +static const struct qusb2_phy_cfg qcs615_phy_cfg = {
> +	.tbl            = qcs615_init_tbl,
> +	.tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
> +	.regs           = ipq6018_regs_layout,
> +
> +	.has_pll_override = false,
> +	.se_clk_scheme_default = false,

Drop false values, please

> +	.disable_ctrl   = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
> +	.mask_core_ready = PLL_LOCKED,
> +	/* autoresume not used */
> +	.autoresume_en   = BIT(0),
> +};
> +
>  static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
>  	.tbl		= qusb2_v2_init_tbl,
>  	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
> @@ -922,6 +948,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
>  	}, {
>  		.compatible	= "qcom,msm8998-qusb2-phy",
>  		.data		= &msm8998_phy_cfg,
> +	}, {
> +		.compatible	= "qcom,qcs615-qusb2-phy",
> +		.data		= &qcs615_phy_cfg,
>  	}, {
>  		.compatible	= "qcom,qcm2290-qusb2-phy",
>  		.data		= &sm6115_phy_cfg,
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index c52655a383ce..227041e096bc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -151,6 +151,19 @@  static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
 };
 
+static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xC8),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+};
+
 static const unsigned int ipq6018_regs_layout[] = {
 	[QUSB2PHY_PLL_STATUS]              = 0x38,
 	[QUSB2PHY_PORT_TUNE1]              = 0x80,
@@ -331,6 +344,19 @@  static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
 	.autoresume_en   = BIT(0),
 };
 
+static const struct qusb2_phy_cfg qcs615_phy_cfg = {
+	.tbl            = qcs615_init_tbl,
+	.tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
+	.regs           = ipq6018_regs_layout,
+
+	.has_pll_override = false,
+	.se_clk_scheme_default = false,
+	.disable_ctrl   = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+	.mask_core_ready = PLL_LOCKED,
+	/* autoresume not used */
+	.autoresume_en   = BIT(0),
+};
+
 static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
 	.tbl		= qusb2_v2_init_tbl,
 	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
@@ -922,6 +948,9 @@  static const struct of_device_id qusb2_phy_of_match_table[] = {
 	}, {
 		.compatible	= "qcom,msm8998-qusb2-phy",
 		.data		= &msm8998_phy_cfg,
+	}, {
+		.compatible	= "qcom,qcs615-qusb2-phy",
+		.data		= &qcs615_phy_cfg,
 	}, {
 		.compatible	= "qcom,qcm2290-qusb2-phy",
 		.data		= &sm6115_phy_cfg,