diff mbox series

[v3,2/5] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag

Message ID 20241015004945.3676-3-jonathan@marek.ca (mailing list archive)
State Not Applicable
Headers show
Series x1e80100 RTC support | expand

Commit Message

Jonathan Marek Oct. 15, 2024, 12:47 a.m. UTC
Qualcomm x1e80100 firmware sets the ownership of the RTC alarm to ADSP.
Thus writing to RTC alarm registers and receiving alarm interrupts is not
possible.

Add a qcom,no-alarm flag to support RTC on this platform.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Krzysztof Kozlowski Oct. 15, 2024, 5:33 a.m. UTC | #1
On 15/10/2024 02:47, Jonathan Marek wrote:
> Qualcomm x1e80100 firmware sets the ownership of the RTC alarm to ADSP.
> Thus writing to RTC alarm registers and receiving alarm interrupts is not
> possible.
> 
> Add a qcom,no-alarm flag to support RTC on this platform.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Johan Hovold Oct. 16, 2024, 6:46 a.m. UTC | #2
On Mon, Oct 14, 2024 at 08:47:27PM -0400, Jonathan Marek wrote:
> Qualcomm x1e80100 firmware sets the ownership of the RTC alarm to ADSP.
> Thus writing to RTC alarm registers and receiving alarm interrupts is not
> possible.
> 
> Add a qcom,no-alarm flag to support RTC on this platform.

Could dropping the alarm interrupt be an alternative to another vendor
property? Some existing RTC drivers use this.

It also seems like having a dedicated compatible for this platform is
warranted, and would also suffice to determine when the alarm registers
are writable.

Note that the binding update should go before the driver patch in the
series.

Johan
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
index d274bb7a534b5..23a5316efadba 100644
--- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -40,6 +40,11 @@  properties:
     description:
       Indicates that the setting of RTC time is allowed by the host CPU.
 
+  qcom,no-alarm:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that RTC alarm is not owned by HLOS (Linux).
+
   nvmem-cells:
     items:
       - description: