diff mbox series

[v4,1/5] dt-bindings: clocks: add binding for gated-fixed-clocks

Message ID 20240906082511.2963890-2-heiko@sntech.de (mailing list archive)
State New
Headers show
Series Binding and driver for gated-fixed-clocks | expand

Commit Message

Heiko Stübner Sept. 6, 2024, 8:25 a.m. UTC
In contrast to fixed clocks that are described as ungateable, boards
sometimes use additional oscillators for things like PCIe reference
clocks, that need actual supplies to get enabled and enable-gpios to be
toggled for them to work.

This adds a binding for such oscillators that are not configurable
themself, but need to handle supplies for them to work.

In schematics they often can be seen as

         ----------------
Enable - | 100MHz,3.3V, | - VDD
         |    3225      |
   GND - |              | - OUT
         ----------------

or similar. The enable pin might be separate but can also just be tied
to the vdd supply, hence it is optional in the binding.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/clock/gated-fixed-clock.yaml     | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml

Comments

Stephen Boyd Oct. 16, 2024, 6:26 p.m. UTC | #1
Quoting Heiko Stuebner (2024-09-06 01:25:07)
> In contrast to fixed clocks that are described as ungateable, boards
> sometimes use additional oscillators for things like PCIe reference
> clocks, that need actual supplies to get enabled and enable-gpios to be
> toggled for them to work.
> 
> This adds a binding for such oscillators that are not configurable
> themself, but need to handle supplies for them to work.
> 
> In schematics they often can be seen as
> 
>          ----------------

Applied to clk-next
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml b/Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml
new file mode 100644
index 000000000000..d3e0faf3c64d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml
@@ -0,0 +1,49 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gated-fixed-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gated Fixed clock
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: gated-fixed-clock
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-output-names:
+    maxItems: 1
+
+  enable-gpios:
+    description:
+      Contains a single GPIO specifier for the GPIO that enables and disables
+      the oscillator.
+    maxItems: 1
+
+  vdd-supply:
+    description: handle of the regulator that provides the supply voltage
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clock-frequency
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-1000000000 {
+      compatible = "gated-fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <1000000000>;
+      vdd-supply = <&reg_vdd>;
+    };
+...