mbox series

[v5,0/2] Add support for new IMX8MP based board

Message ID 20240925124903.1837869-1-michal.vokac@ysoft.com (mailing list archive)
Headers show
Series Add support for new IMX8MP based board | expand

Message

Michal Vokáč Sept. 25, 2024, 12:49 p.m. UTC
Hi,
this series adds support for a new member in our IOTA platform.
The board is based on the i.MX8MP SoC. It adds support for most
of the board functionality except USB Type-C port and some other
minor things.

This series originally included the dt-binding for that Type-C
port controller but I finally removed it based on a good comment
from Krzysztof. I will post the Type-C binding including the driver
in a followup series.

Michal

Michal Vokáč (2):
  dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
  arm64: dts: imx: Add imx8mp-iota2-lumpy board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 423 ++++++++++++++++++
 3 files changed, 425 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts

Comments

Rob Herring (Arm) Sept. 25, 2024, 2:36 p.m. UTC | #1
On Wed, 25 Sep 2024 14:49:01 +0200, Michal Vokáč wrote:
> Hi,
> this series adds support for a new member in our IOTA platform.
> The board is based on the i.MX8MP SoC. It adds support for most
> of the board functionality except USB Type-C port and some other
> minor things.
> 
> This series originally included the dt-binding for that Type-C
> port controller but I finally removed it based on a good comment
> from Krzysztof. I will post the Type-C binding including the driver
> in a followup series.
> 
> Michal
> 
> Michal Vokáč (2):
>   dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
>   arm64: dts: imx: Add imx8mp-iota2-lumpy board
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 423 ++++++++++++++++++
>  3 files changed, 425 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
> 
> --
> 2.43.0
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y freescale/imx8mp-iota2-lumpy.dtb' for 20240925124903.1837869-1-michal.vokac@ysoft.com:

arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dtb: pcie-ep@33800000: reg: [[864026624, 4194304], [402653184, 134217728]] is too short
	from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dtb: pcie-ep@33800000: reg-names: ['dbi', 'addr_space'] is too short
	from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
Shawn Guo Oct. 17, 2024, 9:35 a.m. UTC | #2
On Wed, Sep 25, 2024 at 02:49:01PM +0200, Michal Vokáč wrote:
> Hi,
> this series adds support for a new member in our IOTA platform.
> The board is based on the i.MX8MP SoC. It adds support for most
> of the board functionality except USB Type-C port and some other
> minor things.
> 
> This series originally included the dt-binding for that Type-C
> port controller but I finally removed it based on a good comment
> from Krzysztof. I will post the Type-C binding including the driver
> in a followup series.
> 
> Michal
> 
> Michal Vokáč (2):
>   dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
>   arm64: dts: imx: Add imx8mp-iota2-lumpy board

Applied both, thanks!