| Message ID | 20241017164328.17077-5-umer.uddin@mentallysanemainliners.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add minimal Samsung Galaxy S20 Series board, SM-G981B and SM-G980F support | expand |
On Thu, Oct 17, 2024 at 05:43:27PM +0100, Umer Uddin wrote: > Add initial support for the Samsung Galaxy S20 (x1slte/SM-G980F) > phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It > has only one configuration with 8GB of RAM and 128GB of UFS 3.0 storage. 8 GB RAM, so the memory map should not be the same (and should not be in DTSI file). > > This device tree adds support for the following: > > - SimpleFB > - 8GB RAM > - Buttons Best regards, Krzysztof
On Thu, Oct 17, 2024 at 05:43:27PM +0100, Umer Uddin wrote: > > Add initial support for the Samsung Galaxy S20 (x1slte/SM-G980F) > > phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It > > has only one configuration with 8GB of RAM and 128GB of UFS 3.0 storage. > 8 GB RAM, so the memory map should not be the same (and should not be in > DTSI file). > > > > This device tree adds support for the following: > > > > - SimpleFB > > - 8GB RAM > > - Buttons Best regards, Krzysztof Hi Krzysztof, Thank you for the review. All hubble devices actually do have the first 8GB of RAM mapped the same, I have personally checked this, by getting fdt dumps from /sys/firmware/fdt and checking all of the memory nodes. Best regards, Umer
On 18/10/2024 08:48, Umer Uddin wrote: > On Thu, Oct 17, 2024 at 05:43:27PM +0100, Umer Uddin wrote: >>> Add initial support for the Samsung Galaxy S20 (x1slte/SM-G980F) >>> phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It >>> has only one configuration with 8GB of RAM and 128GB of UFS 3.0 storage. > >> 8 GB RAM, so the memory map should not be the same (and should not be in >> DTSI file). > >>> >>> This device tree adds support for the following: >>> >>> - SimpleFB >>> - 8GB RAM >>> - Buttons > > Best regards, > Krzysztof > > Hi Krzysztof, > > Thank you for the review. > All hubble devices actually do > have the first 8GB of RAM mapped the same, I have personally > checked this, by getting fdt dumps from /sys/firmware/fdt > and checking all of the memory nodes. > What about remaining 4 GB on X1S? Best regards, Krzysztof
On Fri, 18 Oct 2024 09:14:01 +0200, Krzysztof Kozlowski wrote:
> What about remaining 4 GB on X1S?
On x1s, the remaining memory is mapped in the device specific dtsi.
Best regards,
Umer
On 18/10/2024 18:20, Umer Uddin wrote: > On Fri, 18 Oct 2024 09:14:01 +0200, Krzysztof Kozlowski wrote: > >> What about remaining 4 GB on X1S? > > On x1s, the remaining memory is mapped in the device specific dtsi. Then it proves that this is not correctly placed - not a shared part of boards. Remove it from DTSI. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index deb8dc509..783807249 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -10,5 +10,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \ exynos8895-dreamlte.dtb \ exynos990-c1s.dtb \ exynos990-x1s.dtb \ + exynos990-x1slte.dtb \ exynosautov9-sadk.dtb \ exynosautov920-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts new file mode 100644 index 000000000..9e6a1a060 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung Galaxy S20 (x1slte/SM-G980F) device tree source + * + * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org> + */ + +/dts-v1/; +#include "exynos990-hubble-common.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + + model = "Samsung Galaxy S20"; + compatible = "samsung,x1slte", "samsung,exynos990"; +};
Add initial support for the Samsung Galaxy S20 (x1slte/SM-G980F) phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It has only one configuration with 8GB of RAM and 128GB of UFS 3.0 storage. This device tree adds support for the following: - SimpleFB - 8GB RAM - Buttons Signed-off-by: Umer Uddin <umer.uddin@mentallysanemainliners.org> --- arch/arm64/boot/dts/exynos/Makefile | 1 + arch/arm64/boot/dts/exynos/exynos990-x1slte.dts | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1slte.dts