mbox series

[v2,0/2] Enable Ethernet on the Genio 700 EVK board

Message ID 20241018-genio700-eth-v2-0-f3c73b85507b@collabora.com (mailing list archive)
Headers show
Series Enable Ethernet on the Genio 700 EVK board | expand

Message

Nícolas F. R. A. Prado Oct. 18, 2024, 3:19 p.m. UTC
The patches in this series add the ethernet node on mt8188 and enable it
on the Genio 700 EVK board.

The changes were picked up from the downstream branch at
https://git.launchpad.net/~canonical-kernel/ubuntu/+source/linux-mtk/+git/jammy,
cleaned up and split into two commits.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
Changes in v2:
- Moved mdio bus to mt8188.dtsi
- Changed phy-mode: rgmii-rxid -> rgmii-id
- Removed mediatek,tx-delay-ps
- style: Reordered vendor properties alphabetically 
- style: Used fewer lines for clock-names
- Fixed typo in commit message: 1000 Gbps -> 1000 Mbps
- Link to v1: https://lore.kernel.org/r/20241015-genio700-eth-v1-0-16a1c9738cf4@collabora.com

---
Nícolas F. R. A. Prado (2):
      arm64: dts: mediatek: mt8188: Add ethernet node
      arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet

 arch/arm64/boot/dts/mediatek/mt8188.dtsi           | 97 ++++++++++++++++++++++
 .../boot/dts/mediatek/mt8390-genio-700-evk.dts     | 20 +++++
 2 files changed, 117 insertions(+)
---
base-commit: 7f773fd61baa9b136faa5c4e6555aa64c758d07c
change-id: 20241015-genio700-eth-252304da766c

Best regards,

Comments

Rob Herring (Arm) Oct. 21, 2024, 5:58 p.m. UTC | #1
On Fri, 18 Oct 2024 11:19:01 -0400, Nícolas F. R. A. Prado wrote:
> The patches in this series add the ethernet node on mt8188 and enable it
> on the Genio 700 EVK board.
> 
> The changes were picked up from the downstream branch at
> https://git.launchpad.net/~canonical-kernel/ubuntu/+source/linux-mtk/+git/jammy,
> cleaned up and split into two commits.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> Changes in v2:
> - Moved mdio bus to mt8188.dtsi
> - Changed phy-mode: rgmii-rxid -> rgmii-id
> - Removed mediatek,tx-delay-ps
> - style: Reordered vendor properties alphabetically
> - style: Used fewer lines for clock-names
> - Fixed typo in commit message: 1000 Gbps -> 1000 Mbps
> - Link to v1: https://lore.kernel.org/r/20241015-genio700-eth-v1-0-16a1c9738cf4@collabora.com
> 
> ---
> Nícolas F. R. A. Prado (2):
>       arm64: dts: mediatek: mt8188: Add ethernet node
>       arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet
> 
>  arch/arm64/boot/dts/mediatek/mt8188.dtsi           | 97 ++++++++++++++++++++++
>  .../boot/dts/mediatek/mt8390-genio-700-evk.dts     | 20 +++++
>  2 files changed, 117 insertions(+)
> ---
> base-commit: 7f773fd61baa9b136faa5c4e6555aa64c758d07c
> change-id: 20241015-genio700-eth-252304da766c
> 
> Best regards,
> --
> Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y mediatek/mt8390-genio-700-evk.dtb' for 20241018-genio700-eth-v2-0-f3c73b85507b@collabora.com:

arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dtb: jpeg-decoder@1a040000: iommus: [[118, 685], [118, 686], [118, 690], [118, 691], [118, 692], [118, 693]] is too long
	from schema $id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
AngeloGioacchino Del Regno Oct. 22, 2024, 9:19 a.m. UTC | #2
Il 18/10/24 17:19, Nícolas F. R. A. Prado ha scritto:
> The patches in this series add the ethernet node on mt8188 and enable it
> on the Genio 700 EVK board.
> 
> The changes were picked up from the downstream branch at
> https://git.launchpad.net/~canonical-kernel/ubuntu/+source/linux-mtk/+git/jammy,
> cleaned up and split into two commits.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> Changes in v2:
> - Moved mdio bus to mt8188.dtsi
> - Changed phy-mode: rgmii-rxid -> rgmii-id
> - Removed mediatek,tx-delay-ps
> - style: Reordered vendor properties alphabetically
> - style: Used fewer lines for clock-names
> - Fixed typo in commit message: 1000 Gbps -> 1000 Mbps
> - Link to v1: https://lore.kernel.org/r/20241015-genio700-eth-v1-0-16a1c9738cf4@collabora.com
> 
> [...]
Applied to v6.12-next/dts64, thanks!

Cheers,
Angelo