diff mbox series

[RFC,TEST_ARTIFACTS,1/2] artifacts: Initial commit

Message ID 21a6030f352282d822c30de4a1e7ecab9a8c0a99.1729649255.git.victorm.lira@amd.com (mailing list archive)
State New
Headers show
Series artifacts: Initial commit | expand

Commit Message

Lira, Victor M Oct. 23, 2024, 2:53 a.m. UTC 
From: Stefano Stabellini <sstabellini@kernel.org>

Create new repository to produce common artifacts for Xen tests

Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Victor Lira <victorm.lira@amd.com>
---
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: Doug Goldstein <cardoe@cardoe.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: xen-devel@lists.xenproject.org
---
 .gitlab-ci.yml                         | 48 ++++++++++++++++++++
 README.md                              | 10 ++++
 binaries/.gitignore                    |  3 ++
 images/Makefile                        | 20 ++++++++
 images/alpine/x86_64-build.dockerfile  | 25 ++++++++++
 images/alpine/x86_64-rootfs.dockerfile |  4 ++
 scripts/x86_64-argo-linux.sh           | 63 ++++++++++++++++++++++++++
 scripts/x86_64-kernel-linux.sh         | 31 +++++++++++++
 scripts/x86_64-rootfs-alpine.sh        | 58 ++++++++++++++++++++++++
 9 files changed, 262 insertions(+)
 create mode 100644 .gitlab-ci.yml
 create mode 100644 README.md
 create mode 100644 binaries/.gitignore
 create mode 100644 images/Makefile
 create mode 100644 images/alpine/x86_64-build.dockerfile
 create mode 100644 images/alpine/x86_64-rootfs.dockerfile
 create mode 100755 scripts/x86_64-argo-linux.sh
 create mode 100755 scripts/x86_64-kernel-linux.sh
 create mode 100755 scripts/x86_64-rootfs-alpine.sh

--
2.25.1

Comments

Stefano Stabellini Oct. 23, 2024, 4:57 a.m. UTC | #1 
On Tue, 22 Oct 2024, victorm.lira@amd.com wrote:
> From: Stefano Stabellini <sstabellini@kernel.org>

Hi Victor, I think this was a mistake, maybe due to the fact that I
created the repository for you. The From field represent the vauthor and
in this case it should be you.


> Create new repository to produce common artifacts for Xen tests
> 
> Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
> Signed-off-by: Victor Lira <victorm.lira@amd.com>
> ---
> Cc: Andrew Cooper <andrew.cooper3@citrix.com>
> Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
> Cc: Doug Goldstein <cardoe@cardoe.com>
> Cc: Stefano Stabellini <sstabellini@kernel.org>
> Cc: xen-devel@lists.xenproject.org
> ---
>  .gitlab-ci.yml                         | 48 ++++++++++++++++++++
>  README.md                              | 10 ++++
>  binaries/.gitignore                    |  3 ++
>  images/Makefile                        | 20 ++++++++
>  images/alpine/x86_64-build.dockerfile  | 25 ++++++++++
>  images/alpine/x86_64-rootfs.dockerfile |  4 ++
>  scripts/x86_64-argo-linux.sh           | 63 ++++++++++++++++++++++++++
>  scripts/x86_64-kernel-linux.sh         | 31 +++++++++++++
>  scripts/x86_64-rootfs-alpine.sh        | 58 ++++++++++++++++++++++++
>  9 files changed, 262 insertions(+)
>  create mode 100644 .gitlab-ci.yml
>  create mode 100644 README.md
>  create mode 100644 binaries/.gitignore
>  create mode 100644 images/Makefile
>  create mode 100644 images/alpine/x86_64-build.dockerfile
>  create mode 100644 images/alpine/x86_64-rootfs.dockerfile
>  create mode 100755 scripts/x86_64-argo-linux.sh
>  create mode 100755 scripts/x86_64-kernel-linux.sh
>  create mode 100755 scripts/x86_64-rootfs-alpine.sh
> 
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> new file mode 100644
> index 0000000..f2f7738
> --- /dev/null
> +++ b/.gitlab-ci.yml
> @@ -0,0 +1,48 @@
> +workflow:
> +  name: "xen test artifacts"
> +
> +.artifacts:
> +  stage: build
> +  image:
> +    name: registry.gitlab.com/xen-project/people/victormlira/test-artifacts/${CONTAINER}

This of course needs to be changed before the series is committed


> +  artifacts:
> +    name: "${CI_JOB_NAME_SLUG}"
> +    paths:
> +      - binaries/
> +
> +.x86_64-artifacts:
> +  extends: .artifacts
> +  image:
> +    docker:
> +      platform: linux/amd64
> +      user: xenproject
> +  variables:
> +    CONTAINER: alpine:x86_64-build
> +  tags:
> +    - x86_64
> +
> +x86_64-kernel-linux-6.6.56:
> +  extends: .x86_64-artifacts
> +  script:
> +    - . scripts/x86_64-kernel-linux.sh
> +  variables:
> +    LINUX_VERSION: 6.6.56
> +
> +x86_64-rootfs-alpine-3.18:
> +  extends: .x86_64-artifacts
> +  variables:
> +    CONTAINER: alpine:x86_64-rootfs
> +  image:
> +    docker:
> +      user: root
> +  script:
> +    - . scripts/x86_64-rootfs-alpine.sh
> +
> +x86_64-argo-linux-6.6.56:
> +  extends: .x86_64-artifacts
> +  script:
> +    - . scripts/x86_64-argo-linux.sh
> +  variables:
> +    LINUX_VERSION: 6.6.56
> +    ARGO_SHA: "705a7a8a624b42e13e655d3042059b8a85cdf6a3"
> +    ARGOEXEC_SHA: "d900429f6640acc6f68a3d3a4c945d7da60625d8"
> diff --git a/README.md b/README.md
> new file mode 100644
> index 0000000..0d72519
> --- /dev/null
> +++ b/README.md
> @@ -0,0 +1,10 @@
> +# Xen Project Test Artifacts
> +
> +## Overview
> +
> +This repository is used to produce common artifacts for Xen tests.
> +
> +##
> +
> +
> +##
> diff --git a/binaries/.gitignore b/binaries/.gitignore
> new file mode 100644
> index 0000000..95e2a2e
> --- /dev/null
> +++ b/binaries/.gitignore
> @@ -0,0 +1,3 @@
> +# Keep this directory around to be available in CI/CD jobs.
> +*
> +!.gitignore
> diff --git a/images/Makefile b/images/Makefile
> new file mode 100644
> index 0000000..41638d7
> --- /dev/null
> +++ b/images/Makefile
> @@ -0,0 +1,20 @@
> +
> +# The base of where these containers will appear
> +REGISTRY := registry.gitlab.com/xen-project/people/victormlira/test-artifacts

also this


> +CONTAINERS = $(subst .dockerfile,,$(wildcard */*.dockerfile))
> +
> +help:
> +	@echo "Containers to build test artifacts."
> +	@echo "To build one run 'make DISTRO/TAG'."
> +	@echo "Available containers:"
> +	@$(foreach file,$(sort $(CONTAINERS)),echo ${file};)
> +	@echo "To push container builds, set the environment variable PUSH"
> +
> +%: %.dockerfile ## Builds containers
> +	docker build --pull -t $(REGISTRY)/$(@D):$(@F) -f $< $(<D)
> +	@if [ ! -z $${PUSH+x} ]; then \
> +		docker push $(REGISTRY)/$(@D):$(@F); \
> +	fi
> +
> +.PHONY: all
> +all: $(CONTAINERS)
> diff --git a/images/alpine/x86_64-build.dockerfile b/images/alpine/x86_64-build.dockerfile
> new file mode 100644
> index 0000000..374952f
> --- /dev/null
> +++ b/images/alpine/x86_64-build.dockerfile
> @@ -0,0 +1,25 @@
> +# syntax=docker/dockerfile:1
> +FROM --platform=linux/amd64 alpine:3.18
> +LABEL maintainer.name="The Xen Project" \
> +      maintainer.email="xen-devel@lists.xenproject.org"
> +
> +WORKDIR /build/
> +
> +RUN <<EOF
> +adduser -D xenproject
> +apk --no-cache add \
> +      musl-dev  \
> +      build-base \
> +      libc6-compat \
> +      linux-headers \
> +      bash \
> +      git \
> +      curl \
> +      flex \
> +      bison \
> +      elfutils-dev \
> +      autoconf \
> +      automake \
> +      libtool \
> +      openssl-dev


Use the DEPS variable like here to make it a bit more readable:
automation/build/fedora/40-x86_64.dockerfile


> +EOF
> diff --git a/images/alpine/x86_64-rootfs.dockerfile b/images/alpine/x86_64-rootfs.dockerfile
> new file mode 100644
> index 0000000..b912e9c
> --- /dev/null
> +++ b/images/alpine/x86_64-rootfs.dockerfile
> @@ -0,0 +1,4 @@
> +# syntax=docker/dockerfile:1
> +FROM --platform=linux/amd64 alpine:3.18
> +LABEL maintainer.name="The Xen Project" \
> +      maintainer.email="xen-devel@lists.xenproject.org"
> diff --git a/scripts/x86_64-argo-linux.sh b/scripts/x86_64-argo-linux.sh
> new file mode 100755
> index 0000000..a110a33
> --- /dev/null
> +++ b/scripts/x86_64-argo-linux.sh
> @@ -0,0 +1,63 @@
> +#!/usr/bin/env bash
> +
> +if test -z "${LINUX_VERSION}"
> +then
> +    >&2 echo "LINUX_VERSION must be set"; exit 1
> +fi
> +
> +set -ex -o pipefail
> +
> +BUILDDIR="${PWD}"
> +COPYDIR="${BUILDDIR}/binaries/"
> +
> +# Prepare Linux sources
> +curl -fsSLO \
> +    https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-"${LINUX_VERSION}".tar.xz
> +tar xJf linux-"${LINUX_VERSION}".tar.xz
> +cd linux-"${LINUX_VERSION}"
> +make ARCH=x86 defconfig
> +make ARCH=x86 xen.config
> +./scripts/config --enable BRIDGE
> +./scripts/config --enable IGC
> +./scripts/config --enable TUN
> +cp .config .config.orig
> +cat .config.orig \
> +    | grep 'XEN' \
> +    | grep '=m' \
> +    | sed 's/=m/=y/g' \
> +    >> .config
> +make ARCH=x86 olddefconfig
> +make ARCH=x86 modules_prepare
> +
> +# Build Linux kernel module for Xen Argo
> +cd "${BUILDDIR}"
> +git clone \
> +    --depth=1 --branch=master \
> +    https://github.com/OpenXT/linux-xen-argo.git
> +git -C "${BUILDDIR}/linux-xen-argo" switch --detach "${ARGO_SHA}"
> +make -C "linux-${LINUX_VERSION}" M="${BUILDDIR}/linux-xen-argo/argo-linux" \
> +    CFLAGS_MODULE="-Wno-error" KBUILD_MODPOST_WARN=1
> +cp "linux-xen-argo/argo-linux/xen-argo.ko" "${COPYDIR}/xen-argo.ko"
> +
> +# Build Linux libargo shared library, applying fixes to build in Alpine Linux
> +cd "${BUILDDIR}/linux-xen-argo/libargo"
> +sed -i "s|AM_INIT_AUTOMAKE|AC_CONFIG_AUX_DIR(.)\nAM_INIT_AUTOMAKE|" configure.ac
> +sed -i "s/__SOCKADDR_COMMON (sxenargo_)/sa_family_t sxenargo_family/" src/libargo.h
> +sed -i "s/__SOCKADDR_COMMON_SIZE/(sizeof (unsigned short int))/" src/libargo.h
> +autoreconf --install
> +./configure --prefix="${COPYDIR}" CPPFLAGS="-I${PWD}/../argo-linux/include"
> +make
> +make install
> +
> +# Build Linux user program, modifying for xilinx argo test
> +cd "${BUILDDIR}"
> +wget "https://raw.githubusercontent.com/OpenXT/xenclient-oe/${ARGOEXEC_SHA}/\
> +recipes-openxt/argo-exec/argo-exec/argo-exec.c"
> +sed -i "s|#include <xen/xen.h>||" argo-exec.c
> +sed -i "s|ret = shuffle(s, fds\[0\], fds\[1\]);|ret = shuffle(s, 0, 1);|" \
> +    argo-exec.c
> +gcc -I"${BUILDDIR}/linux-xen-argo/libargo/src" \
> +    -I"${BUILDDIR}/linux-xen-argo/argo-linux/include" \
> +    -L"${COPYDIR}/lib/" \
> +    -o argo-exec argo-exec.c -largo
> +cp argo-exec "${COPYDIR}"
> diff --git a/scripts/x86_64-kernel-linux.sh b/scripts/x86_64-kernel-linux.sh
> new file mode 100755
> index 0000000..17be36b
> --- /dev/null
> +++ b/scripts/x86_64-kernel-linux.sh
> @@ -0,0 +1,31 @@
> +#!/usr/bin/env bash
> +
> +if test -z "${LINUX_VERSION}"
> +then
> +    >&2 echo "LINUX_VERSION must be set"; exit 1
> +fi
> +
> +set -ex -o pipefail
> +
> +WORKDIR="${PWD}"
> +COPYDIR="${WORKDIR}/binaries/"
> +
> +# Build Linux
> +curl -fsSLO \
> +    https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-"${LINUX_VERSION}".tar.xz
> +tar xJf linux-"${LINUX_VERSION}".tar.xz
> +cd linux-"${LINUX_VERSION}"
> +make ARCH=x86 defconfig
> +make ARCH=x86 xen.config
> +./scripts/config --enable BRIDGE
> +./scripts/config --enable IGC
> +./scripts/config --enable TUN
> +cp .config .config.orig
> +cat .config.orig \
> +    | grep 'XEN' \
> +    | grep '=m' \
> +    | sed 's/=m/=y/g' \
> +    >> .config
> +make ARCH=x86 olddefconfig
> +make ARCH=x86 "-j$(nproc)" --quiet
> +cp arch/x86/boot/bzImage "${COPYDIR}"
> diff --git a/scripts/x86_64-rootfs-alpine.sh b/scripts/x86_64-rootfs-alpine.sh
> new file mode 100755
> index 0000000..28d8e30
> --- /dev/null
> +++ b/scripts/x86_64-rootfs-alpine.sh
> @@ -0,0 +1,58 @@
> +WORKDIR="${PWD}"
> +
> +apk update
> +
> +# xen runtime deps
> +apk add musl
> +apk add libgcc
> +apk add openrc
> +apk add busybox
> +apk add sudo
> +apk add dbus
> +apk add bash
> +apk add python3
> +apk add zlib
> +apk add ncurses
> +apk add yajl
> +apk add libaio
> +apk add xz
> +apk add util-linux
> +apk add argp-standalone
> +apk add libfdt
> +apk add glib
> +apk add pixman
> +apk add curl
> +apk add udev
> +apk add pciutils
> +apk add libelf
> +
> +# Xen
> +cd /
> +# Minimal ramdisk environment in case of cpio output
> +rc-update add udev
> +rc-update add udev-trigger
> +rc-update add udev-settle
> +rc-update add loopback sysinit
> +rc-update add bootmisc boot
> +rc-update add devfs sysinit
> +rc-update add dmesg sysinit
> +rc-update add hostname boot
> +rc-update add hwclock boot
> +rc-update add hwdrivers sysinit
> +rc-update add modules boot
> +rc-update add killprocs shutdown
> +rc-update add mount-ro shutdown
> +rc-update add savecache shutdown
> +rc-update add local default
> +cp -a /sbin/init /init
> +echo "ttyS0" >> /etc/securetty
> +echo "hvc0" >> /etc/securetty
> +echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab
> +echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab
> +echo > /etc/modules
> +passwd -d "root" root
> +
> +# Create rootfs
> +cd /
> +tar cvzf "${WORKDIR}/binaries/initrd.tar.gz" \
> +    bin dev etc home init lib mnt opt root sbin usr var
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
new file mode 100644
index 0000000..f2f7738
--- /dev/null
+++ b/.gitlab-ci.yml
@@ -0,0 +1,48 @@ 
+workflow:
+  name: "xen test artifacts"
+
+.artifacts:
+  stage: build
+  image:
+    name: registry.gitlab.com/xen-project/people/victormlira/test-artifacts/${CONTAINER}
+  artifacts:
+    name: "${CI_JOB_NAME_SLUG}"
+    paths:
+      - binaries/
+
+.x86_64-artifacts:
+  extends: .artifacts
+  image:
+    docker:
+      platform: linux/amd64
+      user: xenproject
+  variables:
+    CONTAINER: alpine:x86_64-build
+  tags:
+    - x86_64
+
+x86_64-kernel-linux-6.6.56:
+  extends: .x86_64-artifacts
+  script:
+    - . scripts/x86_64-kernel-linux.sh
+  variables:
+    LINUX_VERSION: 6.6.56
+
+x86_64-rootfs-alpine-3.18:
+  extends: .x86_64-artifacts
+  variables:
+    CONTAINER: alpine:x86_64-rootfs
+  image:
+    docker:
+      user: root
+  script:
+    - . scripts/x86_64-rootfs-alpine.sh
+
+x86_64-argo-linux-6.6.56:
+  extends: .x86_64-artifacts
+  script:
+    - . scripts/x86_64-argo-linux.sh
+  variables:
+    LINUX_VERSION: 6.6.56
+    ARGO_SHA: "705a7a8a624b42e13e655d3042059b8a85cdf6a3"
+    ARGOEXEC_SHA: "d900429f6640acc6f68a3d3a4c945d7da60625d8"
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..0d72519
--- /dev/null
+++ b/README.md
@@ -0,0 +1,10 @@ 
+# Xen Project Test Artifacts
+
+## Overview
+
+This repository is used to produce common artifacts for Xen tests.
+
+##
+
+
+##
diff --git a/binaries/.gitignore b/binaries/.gitignore
new file mode 100644
index 0000000..95e2a2e
--- /dev/null
+++ b/binaries/.gitignore
@@ -0,0 +1,3 @@ 
+# Keep this directory around to be available in CI/CD jobs.
+*
+!.gitignore
diff --git a/images/Makefile b/images/Makefile
new file mode 100644
index 0000000..41638d7
--- /dev/null
+++ b/images/Makefile
@@ -0,0 +1,20 @@ 
+
+# The base of where these containers will appear
+REGISTRY := registry.gitlab.com/xen-project/people/victormlira/test-artifacts
+CONTAINERS = $(subst .dockerfile,,$(wildcard */*.dockerfile))
+
+help:
+	@echo "Containers to build test artifacts."
+	@echo "To build one run 'make DISTRO/TAG'."
+	@echo "Available containers:"
+	@$(foreach file,$(sort $(CONTAINERS)),echo ${file};)
+	@echo "To push container builds, set the environment variable PUSH"
+
+%: %.dockerfile ## Builds containers
+	docker build --pull -t $(REGISTRY)/$(@D):$(@F) -f $< $(<D)
+	@if [ ! -z $${PUSH+x} ]; then \
+		docker push $(REGISTRY)/$(@D):$(@F); \
+	fi
+
+.PHONY: all
+all: $(CONTAINERS)
diff --git a/images/alpine/x86_64-build.dockerfile b/images/alpine/x86_64-build.dockerfile
new file mode 100644
index 0000000..374952f
--- /dev/null
+++ b/images/alpine/x86_64-build.dockerfile
@@ -0,0 +1,25 @@ 
+# syntax=docker/dockerfile:1
+FROM --platform=linux/amd64 alpine:3.18
+LABEL maintainer.name="The Xen Project" \
+      maintainer.email="xen-devel@lists.xenproject.org"
+
+WORKDIR /build/
+
+RUN <<EOF
+adduser -D xenproject
+apk --no-cache add \
+      musl-dev  \
+      build-base \
+      libc6-compat \
+      linux-headers \
+      bash \
+      git \
+      curl \
+      flex \
+      bison \
+      elfutils-dev \
+      autoconf \
+      automake \
+      libtool \
+      openssl-dev
+EOF
diff --git a/images/alpine/x86_64-rootfs.dockerfile b/images/alpine/x86_64-rootfs.dockerfile
new file mode 100644
index 0000000..b912e9c
--- /dev/null
+++ b/images/alpine/x86_64-rootfs.dockerfile
@@ -0,0 +1,4 @@ 
+# syntax=docker/dockerfile:1
+FROM --platform=linux/amd64 alpine:3.18
+LABEL maintainer.name="The Xen Project" \
+      maintainer.email="xen-devel@lists.xenproject.org"
diff --git a/scripts/x86_64-argo-linux.sh b/scripts/x86_64-argo-linux.sh
new file mode 100755
index 0000000..a110a33
--- /dev/null
+++ b/scripts/x86_64-argo-linux.sh
@@ -0,0 +1,63 @@ 
+#!/usr/bin/env bash
+
+if test -z "${LINUX_VERSION}"
+then
+    >&2 echo "LINUX_VERSION must be set"; exit 1
+fi
+
+set -ex -o pipefail
+
+BUILDDIR="${PWD}"
+COPYDIR="${BUILDDIR}/binaries/"
+
+# Prepare Linux sources
+curl -fsSLO \
+    https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-"${LINUX_VERSION}".tar.xz
+tar xJf linux-"${LINUX_VERSION}".tar.xz
+cd linux-"${LINUX_VERSION}"
+make ARCH=x86 defconfig
+make ARCH=x86 xen.config
+./scripts/config --enable BRIDGE
+./scripts/config --enable IGC
+./scripts/config --enable TUN
+cp .config .config.orig
+cat .config.orig \
+    | grep 'XEN' \
+    | grep '=m' \
+    | sed 's/=m/=y/g' \
+    >> .config
+make ARCH=x86 olddefconfig
+make ARCH=x86 modules_prepare
+
+# Build Linux kernel module for Xen Argo
+cd "${BUILDDIR}"
+git clone \
+    --depth=1 --branch=master \
+    https://github.com/OpenXT/linux-xen-argo.git
+git -C "${BUILDDIR}/linux-xen-argo" switch --detach "${ARGO_SHA}"
+make -C "linux-${LINUX_VERSION}" M="${BUILDDIR}/linux-xen-argo/argo-linux" \
+    CFLAGS_MODULE="-Wno-error" KBUILD_MODPOST_WARN=1
+cp "linux-xen-argo/argo-linux/xen-argo.ko" "${COPYDIR}/xen-argo.ko"
+
+# Build Linux libargo shared library, applying fixes to build in Alpine Linux
+cd "${BUILDDIR}/linux-xen-argo/libargo"
+sed -i "s|AM_INIT_AUTOMAKE|AC_CONFIG_AUX_DIR(.)\nAM_INIT_AUTOMAKE|" configure.ac
+sed -i "s/__SOCKADDR_COMMON (sxenargo_)/sa_family_t sxenargo_family/" src/libargo.h
+sed -i "s/__SOCKADDR_COMMON_SIZE/(sizeof (unsigned short int))/" src/libargo.h
+autoreconf --install
+./configure --prefix="${COPYDIR}" CPPFLAGS="-I${PWD}/../argo-linux/include"
+make
+make install
+
+# Build Linux user program, modifying for xilinx argo test
+cd "${BUILDDIR}"
+wget "https://raw.githubusercontent.com/OpenXT/xenclient-oe/${ARGOEXEC_SHA}/\
+recipes-openxt/argo-exec/argo-exec/argo-exec.c"
+sed -i "s|#include <xen/xen.h>||" argo-exec.c
+sed -i "s|ret = shuffle(s, fds\[0\], fds\[1\]);|ret = shuffle(s, 0, 1);|" \
+    argo-exec.c
+gcc -I"${BUILDDIR}/linux-xen-argo/libargo/src" \
+    -I"${BUILDDIR}/linux-xen-argo/argo-linux/include" \
+    -L"${COPYDIR}/lib/" \
+    -o argo-exec argo-exec.c -largo
+cp argo-exec "${COPYDIR}"
diff --git a/scripts/x86_64-kernel-linux.sh b/scripts/x86_64-kernel-linux.sh
new file mode 100755
index 0000000..17be36b
--- /dev/null
+++ b/scripts/x86_64-kernel-linux.sh
@@ -0,0 +1,31 @@ 
+#!/usr/bin/env bash
+
+if test -z "${LINUX_VERSION}"
+then
+    >&2 echo "LINUX_VERSION must be set"; exit 1
+fi
+
+set -ex -o pipefail
+
+WORKDIR="${PWD}"
+COPYDIR="${WORKDIR}/binaries/"
+
+# Build Linux
+curl -fsSLO \
+    https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-"${LINUX_VERSION}".tar.xz
+tar xJf linux-"${LINUX_VERSION}".tar.xz
+cd linux-"${LINUX_VERSION}"
+make ARCH=x86 defconfig
+make ARCH=x86 xen.config
+./scripts/config --enable BRIDGE
+./scripts/config --enable IGC
+./scripts/config --enable TUN
+cp .config .config.orig
+cat .config.orig \
+    | grep 'XEN' \
+    | grep '=m' \
+    | sed 's/=m/=y/g' \
+    >> .config
+make ARCH=x86 olddefconfig
+make ARCH=x86 "-j$(nproc)" --quiet
+cp arch/x86/boot/bzImage "${COPYDIR}"
diff --git a/scripts/x86_64-rootfs-alpine.sh b/scripts/x86_64-rootfs-alpine.sh
new file mode 100755
index 0000000..28d8e30
--- /dev/null
+++ b/scripts/x86_64-rootfs-alpine.sh
@@ -0,0 +1,58 @@ 
+WORKDIR="${PWD}"
+
+apk update
+
+# xen runtime deps
+apk add musl
+apk add libgcc
+apk add openrc
+apk add busybox
+apk add sudo
+apk add dbus
+apk add bash
+apk add python3
+apk add zlib
+apk add ncurses
+apk add yajl
+apk add libaio
+apk add xz
+apk add util-linux
+apk add argp-standalone
+apk add libfdt
+apk add glib
+apk add pixman
+apk add curl
+apk add udev
+apk add pciutils
+apk add libelf
+
+# Xen
+cd /
+# Minimal ramdisk environment in case of cpio output
+rc-update add udev
+rc-update add udev-trigger
+rc-update add udev-settle
+rc-update add loopback sysinit
+rc-update add bootmisc boot
+rc-update add devfs sysinit
+rc-update add dmesg sysinit
+rc-update add hostname boot
+rc-update add hwclock boot
+rc-update add hwdrivers sysinit
+rc-update add modules boot
+rc-update add killprocs shutdown
+rc-update add mount-ro shutdown
+rc-update add savecache shutdown
+rc-update add local default
+cp -a /sbin/init /init
+echo "ttyS0" >> /etc/securetty
+echo "hvc0" >> /etc/securetty
+echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab
+echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab
+echo > /etc/modules
+passwd -d "root" root
+
+# Create rootfs
+cd /
+tar cvzf "${WORKDIR}/binaries/initrd.tar.gz" \
+    bin dev etc home init lib mnt opt root sbin usr var