mbox series

[v2,0/2] Add support Boundary Device Nitrogen8MP Universal SMARC Carrier Board

Message ID 20241022080645.39536-1-bhavin.sharma@siliconsignals.io (mailing list archive)
Headers show
Series Add support Boundary Device Nitrogen8MP Universal SMARC Carrier Board | expand

Message

Bhavin Sharma Oct. 22, 2024, 8:06 a.m. UTC 
Add initial support for Nitrogen8MP Universal SMARC Carrier Board with
Nitrogen8MP SMARC System on Module.


Change in V2:

in patch 1/2:
	- Drop Unneeded line 
	- Correct the indentation

in patch 2/2:
	- Add Acked-by tag

Bhavin Sharma (2):
  dt-bindings: arm: fsl: Add Boundary Device Nitrogen8MP Universal SMARC
    Carrier Board
  arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC
    Carrier Board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../freescale/imx8mp-nitrogen-smarc-som.dtsi  | 348 ++++++++++++++++++
 .../imx8mp-nitrogen-smarc-universal-board.dts |  17 +
 3 files changed, 371 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts

Comments

Bhavin Sharma Oct. 23, 2024, 9:21 a.m. UTC | #1 
Hi Shawn,

I mistakenly removed the Makefile in the V2 patch, so please disregard the review of this version. 
I submitted a corrected V3 patch 
 
Link for v3 patch: https://lore.kernel.org/linux-devicetree/20241023091231.10050-1-bhavin.sharma@siliconsignals.io/T/#t

Apologies for any inconvenience caused, and thank you for your understanding.

Best regards,
Bhavin