| Message ID | 20241024154844.8652-1-roger.pau@citrix.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] x86/io-apic: fix directed EOI when using AMD-Vi interrupt remapping | expand |
On 24/10/2024 4:48 pm, Roger Pau Monne wrote: > When using AMD-VI interrupt remapping the vector field in the IO-APIC RTE is > repurposed to contain part of the offset into the remapping table. Previous to > 2ca9fbd739b8 Xen had logic so that the offset into the interrupt remapping > table would match the vector. Such logic was mandatory for end of interrupt to > work, since the vector field (even when not containing a vector) is used by the > IO-APIC to find for which pin the EOI must be performed. > > Introduce a table to store the EOI handlers when using interrupt remapping, so > that the IO-APIC driver can translate pins into EOI handlers without having to > read the IO-APIC RTE entry. Note that to simplify the logic such table is used > unconditionally when interrupt remapping is enabled, even if strictly it would > only be required for AMD-Vi. > > Reported-by: Willi Junga <xenproject@ymy.be> > Suggested-by: David Woodhouse <dwmw@amazon.co.uk> > Fixes: 2ca9fbd739b8 ('AMD IOMMU: allocate IRTE entries instead of using a static mapping') > Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> > --- > Changes since v1: > - s/apic_pin_eoi/io_apic_pin_eoi/. > - Expand comment about io_apic_pin_eoi usage and layout. > - Use uint8_t instead of unsigned int as array type. > - Do not use a sentinel value. > --- > xen/arch/x86/io_apic.c | 41 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > > diff --git a/xen/arch/x86/io_apic.c b/xen/arch/x86/io_apic.c > index e40d2f7dbd75..e3cdfab6359a 100644 > --- a/xen/arch/x86/io_apic.c > +++ b/xen/arch/x86/io_apic.c > @@ -71,6 +71,24 @@ static int apic_pin_2_gsi_irq(int apic, int pin); > > static vmask_t *__read_mostly vector_map[MAX_IO_APICS]; > > +/* > + * Store the EOI handle when using interrupt remapping. > + * > + * If using AMD-Vi interrupt remapping the IO-APIC redirection entry remapped > + * format repurposes the vector field to store the offset into the Interrupt > + * Remap table. This causes directed EOI to longer work, as the CPU vector no > + * longer matches the contents of the RTE vector field. Add a translation > + * table so that directed EOI uses the value in the RTE vector field when > + * interrupt remapping is enabled. > + * > + * Note Intel VT-d Xen code still stores the CPU vector in the RTE vector field > + * when using the remapped format, but use the translation table uniformly in > + * order to avoid extra logic to differentiate between VT-d and AMD-Vi. > + * > + * The matrix is accessed as [#io-apic][#pin]. > + */ > +static uint8_t **io_apic_pin_eoi; > + > static void share_vector_maps(unsigned int src, unsigned int dst) > { > unsigned int pin; > @@ -273,6 +291,13 @@ void __ioapic_write_entry( > { > __io_apic_write(apic, 0x11 + 2 * pin, eu.w2); > __io_apic_write(apic, 0x10 + 2 * pin, eu.w1); > + /* > + * Called in clear_IO_APIC_pin() before io_apic_pin_eoi is allocated. > + * Entry will be updated once the array is allocated and there's a > + * write against the pin. > + */ > + if ( io_apic_pin_eoi ) > + io_apic_pin_eoi[apic][pin] = e.vector; > } > else > iommu_update_ire_from_apic(apic, pin, e.raw); > @@ -298,6 +323,9 @@ static void __io_apic_eoi(unsigned int apic, unsigned int vector, unsigned int p > /* Prefer the use of the EOI register if available */ > if ( ioapic_has_eoi_reg(apic) ) > { > + if ( io_apic_pin_eoi ) > + vector = io_apic_pin_eoi[apic][pin]; > + > /* If vector is unknown, read it from the IO-APIC */ > if ( vector == IRQ_VECTOR_UNASSIGNED ) I'm not sure this works. https://godbolt.org/z/1a55PnKGq io_apic_pin_eoi[apic][pin] gets zero extended when assigning to vector, which can then never match IRQ_VECTOR_UNASSIGNED. Or doesn't this no longer matter in v2? ~Andrew
diff --git a/xen/arch/x86/io_apic.c b/xen/arch/x86/io_apic.c index e40d2f7dbd75..e3cdfab6359a 100644 --- a/xen/arch/x86/io_apic.c +++ b/xen/arch/x86/io_apic.c @@ -71,6 +71,24 @@ static int apic_pin_2_gsi_irq(int apic, int pin); static vmask_t *__read_mostly vector_map[MAX_IO_APICS]; +/* + * Store the EOI handle when using interrupt remapping. + * + * If using AMD-Vi interrupt remapping the IO-APIC redirection entry remapped + * format repurposes the vector field to store the offset into the Interrupt + * Remap table. This causes directed EOI to longer work, as the CPU vector no + * longer matches the contents of the RTE vector field. Add a translation + * table so that directed EOI uses the value in the RTE vector field when + * interrupt remapping is enabled. + * + * Note Intel VT-d Xen code still stores the CPU vector in the RTE vector field + * when using the remapped format, but use the translation table uniformly in + * order to avoid extra logic to differentiate between VT-d and AMD-Vi. + * + * The matrix is accessed as [#io-apic][#pin]. + */ +static uint8_t **io_apic_pin_eoi; + static void share_vector_maps(unsigned int src, unsigned int dst) { unsigned int pin; @@ -273,6 +291,13 @@ void __ioapic_write_entry( { __io_apic_write(apic, 0x11 + 2 * pin, eu.w2); __io_apic_write(apic, 0x10 + 2 * pin, eu.w1); + /* + * Called in clear_IO_APIC_pin() before io_apic_pin_eoi is allocated. + * Entry will be updated once the array is allocated and there's a + * write against the pin. + */ + if ( io_apic_pin_eoi ) + io_apic_pin_eoi[apic][pin] = e.vector; } else iommu_update_ire_from_apic(apic, pin, e.raw); @@ -298,6 +323,9 @@ static void __io_apic_eoi(unsigned int apic, unsigned int vector, unsigned int p /* Prefer the use of the EOI register if available */ if ( ioapic_has_eoi_reg(apic) ) { + if ( io_apic_pin_eoi ) + vector = io_apic_pin_eoi[apic][pin]; + /* If vector is unknown, read it from the IO-APIC */ if ( vector == IRQ_VECTOR_UNASSIGNED ) vector = __ioapic_read_entry(apic, pin, true).vector; @@ -1022,7 +1050,20 @@ static void __init setup_IO_APIC_irqs(void) apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + if ( iommu_intremap ) + { + io_apic_pin_eoi = xzalloc_array(typeof(*io_apic_pin_eoi), nr_ioapics); + BUG_ON(!io_apic_pin_eoi); + } + for (apic = 0; apic < nr_ioapics; apic++) { + if ( iommu_intremap ) + { + io_apic_pin_eoi[apic] = xzalloc_array(typeof(**io_apic_pin_eoi), + nr_ioapic_entries[apic]); + BUG_ON(!io_apic_pin_eoi[apic]); + } + for (pin = 0; pin < nr_ioapic_entries[apic]; pin++) { /* * add it to the IO-APIC irq-routing table:
When using AMD-VI interrupt remapping the vector field in the IO-APIC RTE is repurposed to contain part of the offset into the remapping table. Previous to 2ca9fbd739b8 Xen had logic so that the offset into the interrupt remapping table would match the vector. Such logic was mandatory for end of interrupt to work, since the vector field (even when not containing a vector) is used by the IO-APIC to find for which pin the EOI must be performed. Introduce a table to store the EOI handlers when using interrupt remapping, so that the IO-APIC driver can translate pins into EOI handlers without having to read the IO-APIC RTE entry. Note that to simplify the logic such table is used unconditionally when interrupt remapping is enabled, even if strictly it would only be required for AMD-Vi. Reported-by: Willi Junga <xenproject@ymy.be> Suggested-by: David Woodhouse <dwmw@amazon.co.uk> Fixes: 2ca9fbd739b8 ('AMD IOMMU: allocate IRTE entries instead of using a static mapping') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> --- Changes since v1: - s/apic_pin_eoi/io_apic_pin_eoi/. - Expand comment about io_apic_pin_eoi usage and layout. - Use uint8_t instead of unsigned int as array type. - Do not use a sentinel value. --- xen/arch/x86/io_apic.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)