[RFC,v2,2/3] docs: Add guides section for debugging

Commit Message

Sebastian Fricke Sept. 24, 2024, 8:45 a.m. UTC

This idea was formed after noticing that new developers experience
certain difficulty to navigate within the multitude of different
debugging options in the Kernel and while there often is good
documentation for the tools, the developer has to know first that they
exist and where to find them.
Add a general debugging section to the Kernel documentation, as an
easily locatable entry point to other documentation and as a general
guideline for the topic.

Signed-off-by: Sebastian Fricke <[e-mail]>
---
 .../driver_development_debugging_guide.rst         | 193 +++++++++++++++
 Documentation/debugging/index.rst                  |  66 +++++
 .../debugging/userspace_debugging_guide.rst        | 269 +++++++++++++++++++++
 Documentation/index.rst                            |   2 +
 4 files changed, 530 insertions(+)

Comments

Bagas Sanjaya Sept. 25, 2024, 8:01 a.m. UTC | #1

On Tue, Sep 24, 2024 at 10:45:58AM +0200, Sebastian Fricke wrote:
> +This document serves as a general starting point and lookup for debugging device
> +drivers.
> +While this guide focuses on debugging that requires re-compiling the
> +module/kernel, the `userspace-debugging-guide <userspace_debugging_guide.html>`__
> +will guide you through tools like dynamic debug, ftrace and other tools useful
> +for debugging issues and behavior.
> +For general debugging advice, see `general-debugging-guide <index.html>`__.

You can use :doc: syntax for linking to other docs with custom anchor text,
like:

```
:doc:`userspace debugging guide <userspace_debugging_guide>`
```

(note the file suffix omission).

Better yet, specify the full doc path (e.g.
`Documentation/debugging/userspace_debugging_guide.rst`) and Sphinx will
generate the anchor text with target doc's title.

> +====================================================
> +General debugging advice for Linux Kernel developers
> +====================================================
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   driver_development_debugging_guide
> +   userspace_debugging_guide
> +
> +.. only::  subproject and html
> +
> +   Indices
> +   =======
> +
> +   * :ref:`genindex`
> +
> +General debugging advice
> +========================

Please split general debugging advice into its own doc (e.g. at
general-advice.rst). Most other docs have index.rst only for toctree
listing.

> +**When should you use this over** `Ftrace`_ **?**
> +
> +- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development

Sphinx complains about stray underscores:

Documentation/debugging/userspace_debugging_guide.rst:54: WARNING: Mismatch: both interpreted text role prefix and reference suffix.

I have to trim them:

---- >8 ----
diff --git a/Documentation/debugging/userspace_debugging_guide.rst b/Documentation/debugging/userspace_debugging_guide.rst
index 4d269a9ef9..eac459e30f 100644
--- a/Documentation/debugging/userspace_debugging_guide.rst
+++ b/Documentation/debugging/userspace_debugging_guide.rst
@@ -51,7 +51,7 @@ Here is one example, that enables all available `pr_debug()`'s within the file:
 
 **When should you use this over** `Ftrace`_ **?**
 
-- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development
+- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints>` or when you have added multiple pr_debug() statements during development
 - When timing is not an issue, meaning if multiple `pr_debug()` statements in the code won't cause delays
 - When you care more about receiving specific log messages than tracing the pattern of how a function is called
 
Thanks.

Steve Cho Oct. 3, 2024, 11:06 p.m. UTC | #2

Few minor comments.

On Tue, Sep 24, 2024 at 1:47 AM Sebastian Fricke
<[e-mail]> wrote:
>
> This idea was formed after noticing that new developers experience
> certain difficulty to navigate within the multitude of different
> debugging options in the Kernel and while there often is good
> documentation for the tools, the developer has to know first that they
> exist and where to find them.
> Add a general debugging section to the Kernel documentation, as an
> easily locatable entry point to other documentation and as a general
> guideline for the topic.
>
> Signed-off-by: Sebastian Fricke <[e-mail]>
> ---
>  .../driver_development_debugging_guide.rst         | 193 +++++++++++++++
>  Documentation/debugging/index.rst                  |  66 +++++
>  .../debugging/userspace_debugging_guide.rst        | 269 +++++++++++++++++++++
>  Documentation/index.rst                            |   2 +
>  4 files changed, 530 insertions(+)
>
> diff --git a/Documentation/debugging/driver_development_debugging_guide.rst b/Documentation/debugging/driver_development_debugging_guide.rst
> new file mode 100644
> index 000000000000..c750f63ac1d3
> --- /dev/null
> +++ b/Documentation/debugging/driver_development_debugging_guide.rst
> @@ -0,0 +1,193 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +========================================
> +Debugging advice for driver development
> +========================================
> +
> +This document serves as a general starting point and lookup for debugging device
> +drivers.
> +While this guide focuses on debugging that requires re-compiling the
> +module/kernel, the `userspace-debugging-guide <userspace_debugging_guide.html>`__
> +will guide you through tools like dynamic debug, ftrace and other tools useful
> +for debugging issues and behavior.
> +For general debugging advice, see `general-debugging-guide <index.html>`__.
> +
> +.. contents::
> +    :depth: 3
> +
> +Available tools
> +===============
> +
> +Printk & friends
> +----------------
> +
> +These are derivatives of printf() with varying destinations and support for being dynamically turned on or off, or lack thereof.
> +
> +.. _printk:
> +
> +**Simple printk**
> +~~~~~~~~~~~~~~~~~
> +
> +The classic, can be used to great effect for quick and dirty development
> +of new modules or to extract arbitrary necessary data for troubleshooting.
> +
> +Prerequisite: :code:`CONFIG_PRINTK` (usually enabled by default)
> +
> +**Pros**:
> +
> +- No need to learn anything, simple to use
> +- Easy to modify exactly to your needs (formatting of the data (See: `format specifiers <../core-api/printk-formats.html>`__), visibility in the log)
> +- Can cause delays in the execution of the code (beneficial to confirm whether timing is a factor)
I experienced this too before, but isn't it generalizing too much here?
I mean it is not easy to observe timing issue with printk.

> +
> +**Cons**:
> +
> +- Requires rebuilding the kernel/module
> +- Can cause delays in the execution of the code (which can cause issues to be not reproducible)
> +
> +`Full documentation <../core-api/printk-basics.html>`__
> +
> +.. _trace_printk:
> +
> +**Trace_printk**
> +~~~~~~~~~~~~~~~~
> +
> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE` & :code:`#include <linux/ftrace.h>`
> +
> +It is a tiny bit less comfortable to use than `printk`_, because you will have
> +to read the messages from the trace file (See: `Reading the ftrace log
> +<userspace_debugging_guide.html#read-the-ftrace-log>`_ instead of from the
> +kernel log, but very useful when printk adds unwanted delays into the code
> +execution, causing issues to be flaky or hidden.)
> +
> +If the processing of this still causes timing issues then you can try `trace_puts()`.
> +
> +`Full Documentation <../driver-api/basics.html#c.trace_printk>`__
> +
> +**dev_dbg**
> +~~~~~~~~~~~
> +
> +Print statement, which can be target by `dynamic debug
nit: s/target/targeted

> +<userspace_debugging_guide.html#dynamic-debug>`__, that contains additional
> +information about the device used within the context.
> +
> +**When is it appropriate to leave a debug print in the code?**
> +
> +Permanent debug statements have to be useful for a developer to troubleshoot
> +driver misbehavior. Judging that is a bit more of an art than a science, but
> +some guidelines are in the `Coding style guide
> +<../process/coding-style.html#printing-kernel-messages>`__.
> +
> +**Custom printk**
> +~~~~~~~~~~~~~~~~~
> +
> +Example:
> +::
> +
> +  #define core_dbg(fmt, arg...) do { \
> +         if (core_debug) \
> +                 printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \
> +         } while (0)
> +
> +**When should you do this?**
> +
> +It is better to just use a `pr_debug()`, which can later be turned on/off with
> +dynamic debug. Additionally, a lot of drivers activate these prints via a
> +variable like `core_debug` set by a module parameter. However, Module
> +parameters `are not recommended anymore
> +<https://lkml.org/lkml/2024/3/27/163>`_.
> +
> +Ftrace
> +------
> +
> +**Creating custom Ftrace tracepoint**
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Here is a basic description of `how to implement new tracepoints <../trace/tracepoints.html#usage>`__.
> +
> +`Full event tracing documentation <../trace/events.html>`__
> +
> +`Full Ftrace documentation <../trace/ftrace.html>`__
> +
> +DebugFS
> +-------
> +
> +Prerequisite: :code:`CONFIG_DEBUG_FS` & :code:`#include <linux/debugfs.h>`
> +
> +DebugFS differs from the other approaches of debugging, as it doesn't write messages to the kernel log nor add traces to the code. Instead it allows the developer to handle a set of files.
> +With these files you can either store values of variables or make register/memory dumps or you can make these files writable and modify values/settings in the driver.
> +Possible use-cases among others:
> +
> +- Store register values
> +- Keep track of variables
> +- Store errors
> +- Store settings
> +- Toggle a setting like debug on/off
> +- Error injection
> +
> +This is especially useful, when the size of a data dump would be hard to digest as
> +part of the general kernel log (for example when dumping raw bitstream data) or
> +when you are not interested in all the values all the time, but with the
> +possibility to inspect them.
> +
> +The general idea is:
> +
> +- Create a directory during probe (`struct dentry *parent = debugfs_create_dir("my_driver", NULL);`)
> +- Create a file (`debugfs_create_u32("my_value", 444, parent, &my_variable);`)
> +
> +  - In this example the file is found in `/sys/kernel/debug/my_driver/my_value` (with read permissions for user/group/all)
> +  - any update of `my_variable` will update the value in the file
> +
> +- Clean up the folder when removing the device (`debugfs_remove_recursive(parent);`)
> +
> +`Full documentation <../filesystems/debugfs.html>`__
> +
> +.. _error_checking:
> +
> +KASAN, UBSAN, lockdep and other error checkers
> +----------------------------------------------
> +
> +KASAN (Kernel Address Sanitizer)
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +KASAN is a dynamic memory error detector that helps to find use-after-free and
> +out-of-bounds bugs. It uses compile-time instrumentation to check every memory
> +access.
> +
> +`Full documentation <../dev-tools/kasan.html>`__
> +
> +UBSAN (Undefined Behavior Sanitizer)
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +UBSAN relies on compiler instrumentation and runtime checks to detect undefined
> +behavior. It is designed to find a variety of issues, including signed integer overflow,
> +array index out of bounds, and more.
> +
> +`Full documentation <../dev-tools/ubsan.html>`__
> +
> +lockdep (Lock Dependency Validator)
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +lockdep is a runtime lock dependency validator that detects potential deadlocks
> +and other locking-related issues in the kernel.
> +It tracks lock acquisitions and releases, building a dependency graph that is
> +analyzed for potential deadlocks.
> +lockdep is especially useful for validating the correctness of lock ordering in
> +the kernel.
> +
> +device coredump
> +---------------
> +
> +Prerequisite: :code:`#include <linux/devcoredump.h>`
> +
> +Provides infrastructure through which the driver can provide arbitrary data to
> +userland. It is most often used in conjunction with udev or similar userland
> +infrastructure to listen for the kernel uevents, which indicates the dump is
> +ready. Udev then usually has rules to copy that file somewhere for long-term
> +storage and analysis as by default the data for the dump is automatically
nit: didn't understand. maybe intended s/as/and/ ?

> +cleaned up after 5 minutes.
> +That data is then analyzed with driver-specific tools or GDB.
> +
> +You can find an example implementation at: :code:`drivers/media/platform/qcom/venus/core.c`
> +
> +**Copyright** |copy| 2024 : Collabora
> diff --git a/Documentation/debugging/index.rst b/Documentation/debugging/index.rst
> new file mode 100644
> index 000000000000..7bdad2fa09e1
> --- /dev/null
> +++ b/Documentation/debugging/index.rst
> @@ -0,0 +1,66 @@
> +
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +====================================================
> +General debugging advice for Linux Kernel developers
> +====================================================
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   driver_development_debugging_guide
> +   userspace_debugging_guide
> +
> +.. only::  subproject and html
> +
> +   Indices
> +   =======
> +
> +   * :ref:`genindex`
> +
> +General debugging advice
> +========================
> +
> +Depending on the issue, a different set of tools is available to track down the
> +problem or even to realize whether there is one in the first place.
> +
> +As a first step you have to figure out what kind of issue you want to debug.
> +Depending on the answer, your methodology and choice of tools may vary.
> +
> +Do I need to debug with limited access?
> +---------------------------------------
> +
> +Do you have limited access to the machine or are you unable to stop the running execution?
> +
> +In this case your debugging capability depends on built-in debugging support of
> +provided distro kernel.
> +The `userspace debugging guide <userspace_debugging_guide.html>`__ provides a
> +brief overview over range of possible debugging tools in that situation. You
> +can check the capability of your kernel, in most cases, by looking into config
> +file within the /boot folder.
> +
> +Do I have root access to the system?
> +------------------------------------
> +
> +Are you easily able to replace the module in question or to install a new kernel?
> +
> +In that case your range of available tools is a lot bigger, you can find the
> +tools `here <driver_development_debugging_guide.html>`__.
> +
> +Is timing a factor?
> +-------------------
> +
> +It is important to understand if the problem you want to debug manifests itself
> +consistently (i.e. given a set of inputs you always get the same, incorrect
> +output), or inconsistently. If it manifests itself inconsistently, some timing
> +factor might be at play. If inserting delays into the code does change the
> +behavior, then quite likely timing is a factor.
> +
> +When timing does alter the outcome of the code execution using a simple `printk
> +<driver_development_debugging_guide.html#printk>`_ for debugging purposes won't
> +work, a similar alternative is to use `trace_printk
> +<driver_development_debugging_guide.html#trace-printk>`_, which logs the debug
> +messages to the trace file instead of the kernel log.
> +
> +**Copyright** |copy| 2024 : Collabora
> diff --git a/Documentation/debugging/userspace_debugging_guide.rst b/Documentation/debugging/userspace_debugging_guide.rst
> new file mode 100644
> index 000000000000..4d269a9ef913
> --- /dev/null
> +++ b/Documentation/debugging/userspace_debugging_guide.rst
> @@ -0,0 +1,269 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +==========================
> +Userspace debugging advice
> +==========================
> +
> +A brief overview of common tools to debug the Linux Kernel from userspace.
> +For debugging advice aimed at driver developer go `here <driver_development_debugging_guide.html>`__.
> +For general debugging advice, see `general-debugging-guide <index.html>`__.
> +
> +.. contents::
> +    :depth: 3
> +
> +Available tools
> +===============
> +
> +Dynamic debug
> +-------------
> +
> +Mechanism to filter what ends up in the kernel log by dis-/en-abling log
> +messages.
> +
> +Prerequisite: `CONFIG_DYNAMIC_DEBUG`
> +
> +.. _valid_dyndbg_prints:
> +
> +Dynamic debug is only able to target:
> +
> +- `pr_debug()`
> +- `dev_dbg()`
> +- `print_hex_dump_debug()`
> +- `print_hex_dump_bytes()`
> +
> +Therefore the usability of this tool is quite limited in the media subsystem,
> +because, as of now, there is no uniform rule for adding debug prints to the codebase,
> +resulting in a variety of ways these prints are implemented.
Shouldn't this explanation and some examples below go to the media
specific document instead of here?
Some parts in this patch are tricky to decide where to go, but
suggesting to review once again.

> +
> +Also, note that most debug statements are implemented as a variation of
> +`dprintk`, which have to be activated via a parameter in respective module,
> +dynamic debug is unable to do that step for you.
> +
> +Here is one example, that enables all available `pr_debug()`'s within the file:
> +::
> +
> +  $ alias ddcmd='echo $* > /proc/dynamic_debug/control'
> +  $ ddcmd '-p; file v4l2-h264.c +p'
> +  $ grep =p /proc/dynamic_debug/control
> +   drivers/media/v4l2-core/v4l2-h264.c:372 [v4l2_h264]print_ref_list_b =p "ref_pic_list_b%u (cur_poc %u%c) %s"
> +   drivers/media/v4l2-core/v4l2-h264.c:333 [v4l2_h264]print_ref_list_p =p "ref_pic_list_p (cur_poc %u%c) %s\n"
> +
> +**When should you use this over** `Ftrace`_ **?**
> +
> +- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development
> +- When timing is not an issue, meaning if multiple `pr_debug()` statements in the code won't cause delays
> +- When you care more about receiving specific log messages than tracing the pattern of how a function is called
> +
> +`Full documentation <../admin-guide/dynamic-debug-howto.html>`__
> +
> +Ftrace
> +------
> +
> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE`
> +
> +Trace whenever the a file is opened:
> +::
> +
> +  $ cd /sys/kernel/tracing
> +  $ echo function > /sys/kernel/tracing/current_tracer
> +  $ echo do_filep_open > set_ftrace_filter
> +  $ echo 1 > tracing_on
> +  $ cat trace
> +       find-4624    [005] ...1. 580781.888166: do_filp_open <-do_sys_openat2
> +       find-4624    [005] ...1. 580781.888237: do_filp_open <-do_sys_openat2
> +       find-4624    [005] ...1. 580781.888361: do_filp_open <-do_sys_openat2
> +
> +.. _event_tracing:
> +
> +Activate a ftrace event on top of that:
> +::
> +
> +  $ echo 1 > events/kmem/kfree/enable
> +       find-5351    [005] ...1. 678288.910143: do_filp_open <-do_sys_openat2
> +       find-5351    [005] ..... 678288.910185: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
> +       find-5351    [005] ...1. 678288.910218: do_filp_open <-do_sys_openat2
> +       find-5351    [005] ..... 678288.910260: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
> +       find-5351    [005] ...1. 678288.910293: do_filp_open <-do_sys_openat2
> +       find-5351    [005] ..... 678288.910345: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
> +       find-5351    [005] ..... 678288.910389: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000007ba73e40
> +       find-5351    [005] ..... 678288.910390: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000009e4850bc
> +       find-5351    [005] ..... 678288.910391: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000004156f20f
> +       find-5351    [005] ..... 678288.910393: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=00000000c7207e20
> +       find-5351    [005] ..... 678288.910394: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000037c31d76
> +       find-5351    [005] ..... 678288.910395: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000001922677
> +
> +.. _read_ftrace_log:
> +
> +**Reading the ftrace log**
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The `trace` file can be read just like any other file (`cat`, `tail`, `head`,
> +`vim`, etc.), the size of the file is limited by the `buffer_size_kb` (``echo
> +1000 > buffer_size_kb``). The `trace_pipe` will behave similar to the `trace`
> +file, but whenever you read from the file the content is consumed.
> +
> +**Kernelshark**
> +~~~~~~~~~~~~~~~
> +
> +A GUI interface to visualize the traces as a graph and list view from the
> +output of the `trace-cmd
> +<https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/>`__ application.
> +
> +`Kernelshark documentation <https://kernelshark.org/Documentation.html>`_
> +
> +`Full Ftrace documentation <../trace/ftrace.html>`__
> +
> +Perf & alternatives
> +-------------------
> +
> +The tools mentioned above provide ways to inspect kernel code, results, variable values, etc.
> +Sometimes you have to find out first where to look and for those cases a box of performance tracking tools can help you to frame the issue.
nit: add comma. better readability.
s/and for those cases /and for those cases, /

> +
> +.. _performance:
> +
> +**Why should you do a performance analysis?**
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +A performance analysis is a good first step when among other reasons:
> +
> +- you cannot define the issue
> +- you do not know where it occurs
> +- the running system should not be interrupted or it is a remote system, where you cannot install a new module/kernel
> +
> +.. _linux-tools:
> +
> +**How to do a simple analysis with linux tools?**
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +For the start of a performance analysis, you can start with the usual tools like:
> +
> +- `top` / `htop` / `atop` (*get an overview of the system load, see spikes on specific processes*)
> +- `mpstat -P ALL` (*look at the load distribution among CPUs*)
> +- `iostat -x` (*observe input and output devices utilization and performance*)
> +- `vmstat` (*overview of memory usage on the system*)
> +- `pidstat` (*similar to* `vmstat` *but per process, to dial it down to the target*)
> +- `strace -tp $PID` (*once you know the process, you can figure out how it communicates with the Kernel*)
> +
> +These should help to figure out restrict the areas to look at sufficiently.
nit: s/figure out restrict/narrow down/

> +
> +**Diving deeper with perf**
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The **perf** tool provides a series of metrics and events to further dial down on issues.
> +
> +Prerequisite: build or install perf on your system
> +
> +Gather statistics data for finding all files starting with `gcc` in `/usr`
> +::
> +
> +       # perf stat -d find /usr -name 'gcc*' | wc -l
> +
> +        Performance counter stats for 'find /usr -name gcc*':
> +
> +                  1277.81 msec task-clock                       #    0.997 CPUs utilized
> +                        9      context-switches                 #    7.043 /sec
> +                        1      cpu-migrations                   #    0.783 /sec
> +                      704      page-faults                      #  550.943 /sec
> +                766548897      cycles                           #    0.600 GHz                         (97.15%)
> +                798285467      instructions                     #    1.04  insn per cycle              (97.15%)
> +                 57582731      branches                         #   45.064 M/sec                       (2.85%)
> +                  3842573      branch-misses                    #    6.67% of all branches             (97.15%)
> +                281616097      L1-dcache-loads                  #  220.390 M/sec                       (97.15%)
> +                  4220975      L1-dcache-load-misses            #    1.50% of all L1-dcache accesses   (97.15%)
> +          <not supported>      LLC-loads
> +          <not supported>      LLC-load-misses
> +
> +              1.281746009 seconds time elapsed
> +
> +              0.508796000 seconds user
> +              0.773209000 seconds sys
> +
> +
> +       52
> +
> +The availability of events and metrics depends on the system you are running.
> +
> +`Full documentation <https://perf.wiki.kernel.org/index.php/Main_Page>`__
> +
> +**Perfetto**
> +~~~~~~~~~~~~
> +
> +A set of tools to measure and analyze how well applications and systems perform.
> +You can use it to:
> +
> +* identify bottlenecks
> +* optimize code
> +* make software run faster and more efficiently.
> +
> +**What is the difference between perfetto and perf?**
> +
> +* perf is tool as part of and specialized for the Linux Kernel and has CLI user
> +  interface.
> +* perfetto cross-platform performance analysis stack, has extended
> +  functionality into userspace and provides a WEB user interface.
> +
> +`Full documentation <https://perfetto.dev/docs/>`__
> +
> +.. _kernel_panic_analysis_tools:
> +
> +Kernel panic analysis tools
> +---------------------------
> +
> +  To analyse the crash dump please use `Kdump` & `Kexec`.
> +
> +  `Full documentation <../admin-guide/kdump/kdump.html>`__
> +
> +  In order to find the corresponding line in the code you can use `faddr2line
> +  <https://elixir.bootlin.com/linux/latest/source/scripts/faddr2line>`__, note
> +  that you need to enable `CONFIG_DEBUG_INFO` for that to work.
> +
> +  An alternative to using `faddr2line` is the use of `objdump` (and it's
> +  derivatives for the different platforms like `aarch64-linux-gnu-objdump`),
> +  take this line as an example:
> +
> +  `[  +0.000240]  rkvdec_device_run+0x50/0x138 [rockchip_vdec]`.
> +
> +  We can find the corresponding line of code by executing:
> +  ::
> +
> +    aarch64-linux-gnu-objdump -dS drivers/staging/media/rkvdec/rockchip-vdec.ko | grep rkvdec_device_run\>: -A 40
> +    0000000000000ac8 <rkvdec_device_run>:
> +     ac8:      d503201f        nop
> +     acc:      d503201f        nop
> +    {
> +     ad0:      d503233f        paciasp
> +     ad4:      a9bd7bfd        stp     x29, x30, [sp, #-48]!
> +     ad8:      910003fd        mov     x29, sp
> +     adc:      a90153f3        stp     x19, x20, [sp, #16]
> +     ae0:      a9025bf5        stp     x21, x22, [sp, #32]
> +        const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
> +     ae4:      f9411814        ldr     x20, [x0, #560]
> +        struct rkvdec_dev *rkvdec = ctx->dev;
> +     ae8:      f9418015        ldr     x21, [x0, #768]
> +        if (WARN_ON(!desc))
> +     aec:      b4000654        cbz     x20, bb4 <rkvdec_device_run+0xec>
> +        ret = pm_runtime_resume_and_get(rkvdec->dev);
> +     af0:      f943d2b6        ldr     x22, [x21, #1952]
> +        ret = __pm_runtime_resume(dev, RPM_GET_PUT);
> +     af4:      aa0003f3        mov     x19, x0
> +     af8:      52800081        mov     w1, #0x4                        // #4
> +     afc:      aa1603e0        mov     x0, x22
> +     b00:      94000000        bl      0 <__pm_runtime_resume>
> +        if (ret < 0) {
> +     b04:      37f80340        tbnz    w0, #31, b6c <rkvdec_device_run+0xa4>
> +        dev_warn(rkvdec->dev, "Not good\n");
> +     b08:      f943d2a0        ldr     x0, [x21, #1952]
> +     b0c:      90000001        adrp    x1, 0 <rkvdec_try_ctrl-0x8>
> +     b10:      91000021        add     x1, x1, #0x0
> +     b14:      94000000        bl      0 <_dev_warn>
> +        *bad = 1;
> +     b18:      d2800001        mov     x1, #0x0                        // #0
> +     ...
> +
> +
> +  To find the matching line we just have to add `0x50` (from
> +  `rkvdec_device_run+0x50`) to `0xac8` (from `0000000000000ac8
> +  <rkvdec_device_run>:`), which yields `0xb18` corresponding with `*bad = 1`.
I didn't understand this part. Can you explain?

> +
> +**Copyright** |copy| 2024 : Collabora
> diff --git a/Documentation/index.rst b/Documentation/index.rst
> index f9f525f4c0dd..eb8de7ba8e41 100644
> --- a/Documentation/index.rst
> +++ b/Documentation/index.rst
> @@ -57,6 +57,7 @@ Various other manuals with useful information for all kernel developers.
>     Testing guide <dev-tools/testing-overview>
>     Hacking guide <kernel-hacking/index>
>     Tracing <trace/index>
> +   Debugging <debugging/index>
>     Fault injection <fault-injection/index>
>     Livepatching <livepatch/index>
>     Rust <rust/index>
> @@ -76,6 +77,7 @@ developers seeking information on the kernel's user-space APIs.
>     Build system <kbuild/index>
>     Reporting issues <admin-guide/reporting-issues.rst>
>     Userspace tools <tools/index>
> +   Userspace debugging tools <debugging/userspace_debugging_guide.rst>
>     Userspace API <userspace-api/index>
>
>  See also: the `Linux man pages <https://www.kernel.org/doc/man-pages/>`_,
>
> --
> 2.25.1
>

Sebastian Fricke Oct. 4, 2024, 10:12 a.m. UTC | #3

Hey Steve,

On 03.10.2024 16:06, Steve Cho wrote:
>Few minor comments.
>
>On Tue, Sep 24, 2024 at 1:47 AM Sebastian Fricke
><[e-mail]> wrote:
>>
>> This idea was formed after noticing that new developers experience
>> certain difficulty to navigate within the multitude of different
>> debugging options in the Kernel and while there often is good
>> documentation for the tools, the developer has to know first that they
>> exist and where to find them.
>> Add a general debugging section to the Kernel documentation, as an
>> easily locatable entry point to other documentation and as a general
>> guideline for the topic.
>>
>> Signed-off-by: Sebastian Fricke <[e-mail]>
>> ---
>>  .../driver_development_debugging_guide.rst         | 193 +++++++++++++++
>>  Documentation/debugging/index.rst                  |  66 +++++
>>  .../debugging/userspace_debugging_guide.rst        | 269 +++++++++++++++++++++
>>  Documentation/index.rst                            |   2 +
>>  4 files changed, 530 insertions(+)
>>
>> diff --git a/Documentation/debugging/driver_development_debugging_guide.rst b/Documentation/debugging/driver_development_debugging_guide.rst
>> new file mode 100644
>> index 000000000000..c750f63ac1d3
>> --- /dev/null
>> +++ b/Documentation/debugging/driver_development_debugging_guide.rst
>> @@ -0,0 +1,193 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +.. include:: <isonum.txt>
>> +
>> +========================================
>> +Debugging advice for driver development
>> +========================================
>> +
>> +This document serves as a general starting point and lookup for debugging device
>> +drivers.
>> +While this guide focuses on debugging that requires re-compiling the
>> +module/kernel, the `userspace-debugging-guide <userspace_debugging_guide.html>`__
>> +will guide you through tools like dynamic debug, ftrace and other tools useful
>> +for debugging issues and behavior.
>> +For general debugging advice, see `general-debugging-guide <index.html>`__.
>> +
>> +.. contents::
>> +    :depth: 3
>> +
>> +Available tools
>> +===============
>> +
>> +Printk & friends
>> +----------------
>> +
>> +These are derivatives of printf() with varying destinations and support for being dynamically turned on or off, or lack thereof.
>> +
>> +.. _printk:
>> +
>> +**Simple printk**
>> +~~~~~~~~~~~~~~~~~
>> +
>> +The classic, can be used to great effect for quick and dirty development
>> +of new modules or to extract arbitrary necessary data for troubleshooting.
>> +
>> +Prerequisite: :code:`CONFIG_PRINTK` (usually enabled by default)
>> +
>> +**Pros**:
>> +
>> +- No need to learn anything, simple to use
>> +- Easy to modify exactly to your needs (formatting of the data (See: `format specifiers <../core-api/printk-formats.html>`__), visibility in the log)
>> +- Can cause delays in the execution of the code (beneficial to confirm whether timing is a factor)
>I experienced this too before, but isn't it generalizing too much here?
>I mean it is not easy to observe timing issue with printk.

True it is not very easy to do this deterministically, but I thought it
might be helpful as an idea, in case an issue is flaky. A few print
statements might cause enough delay to make the issue more reproducible,
that was at least my experience in the past. Maybe I could word it
better or this potential positive aspect can be derived from the
negative aspect below.
  
>
>> +
>> +**Cons**:
>> +
>> +- Requires rebuilding the kernel/module
>> +- Can cause delays in the execution of the code (which can cause issues to be not reproducible)
>> +
>> +`Full documentation <../core-api/printk-basics.html>`__
>> +
>> +.. _trace_printk:
>> +
>> +**Trace_printk**
>> +~~~~~~~~~~~~~~~~
>> +
>> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE` & :code:`#include <linux/ftrace.h>`
>> +
>> +It is a tiny bit less comfortable to use than `printk`_, because you will have
>> +to read the messages from the trace file (See: `Reading the ftrace log
>> +<userspace_debugging_guide.html#read-the-ftrace-log>`_ instead of from the
>> +kernel log, but very useful when printk adds unwanted delays into the code
>> +execution, causing issues to be flaky or hidden.)
>> +
>> +If the processing of this still causes timing issues then you can try `trace_puts()`.
>> +
>> +`Full Documentation <../driver-api/basics.html#c.trace_printk>`__
>> +
>> +**dev_dbg**
>> +~~~~~~~~~~~
>> +
>> +Print statement, which can be target by `dynamic debug
>nit: s/target/targeted
>
>> +<userspace_debugging_guide.html#dynamic-debug>`__, that contains additional
>> +information about the device used within the context.
>> +
>> +**When is it appropriate to leave a debug print in the code?**
>> +
>> +Permanent debug statements have to be useful for a developer to troubleshoot
>> +driver misbehavior. Judging that is a bit more of an art than a science, but
>> +some guidelines are in the `Coding style guide
>> +<../process/coding-style.html#printing-kernel-messages>`__.
>> +
>> +**Custom printk**
>> +~~~~~~~~~~~~~~~~~
>> +
>> +Example:
>> +::
>> +
>> +  #define core_dbg(fmt, arg...) do { \
>> +         if (core_debug) \
>> +                 printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \
>> +         } while (0)
>> +
>> +**When should you do this?**
>> +
>> +It is better to just use a `pr_debug()`, which can later be turned on/off with
>> +dynamic debug. Additionally, a lot of drivers activate these prints via a
>> +variable like `core_debug` set by a module parameter. However, Module
>> +parameters `are not recommended anymore
>> +<https://lkml.org/lkml/2024/3/27/163>`_.
>> +
>> +Ftrace
>> +------
>> +
>> +**Creating custom Ftrace tracepoint**
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +Here is a basic description of `how to implement new tracepoints <../trace/tracepoints.html#usage>`__.
>> +
>> +`Full event tracing documentation <../trace/events.html>`__
>> +
>> +`Full Ftrace documentation <../trace/ftrace.html>`__
>> +
>> +DebugFS
>> +-------
>> +
>> +Prerequisite: :code:`CONFIG_DEBUG_FS` & :code:`#include <linux/debugfs.h>`
>> +
>> +DebugFS differs from the other approaches of debugging, as it doesn't write messages to the kernel log nor add traces to the code. Instead it allows the developer to handle a set of files.
>> +With these files you can either store values of variables or make register/memory dumps or you can make these files writable and modify values/settings in the driver.
>> +Possible use-cases among others:
>> +
>> +- Store register values
>> +- Keep track of variables
>> +- Store errors
>> +- Store settings
>> +- Toggle a setting like debug on/off
>> +- Error injection
>> +
>> +This is especially useful, when the size of a data dump would be hard to digest as
>> +part of the general kernel log (for example when dumping raw bitstream data) or
>> +when you are not interested in all the values all the time, but with the
>> +possibility to inspect them.
>> +
>> +The general idea is:
>> +
>> +- Create a directory during probe (`struct dentry *parent = debugfs_create_dir("my_driver", NULL);`)
>> +- Create a file (`debugfs_create_u32("my_value", 444, parent, &my_variable);`)
>> +
>> +  - In this example the file is found in `/sys/kernel/debug/my_driver/my_value` (with read permissions for user/group/all)
>> +  - any update of `my_variable` will update the value in the file
>> +
>> +- Clean up the folder when removing the device (`debugfs_remove_recursive(parent);`)
>> +
>> +`Full documentation <../filesystems/debugfs.html>`__
>> +
>> +.. _error_checking:
>> +
>> +KASAN, UBSAN, lockdep and other error checkers
>> +----------------------------------------------
>> +
>> +KASAN (Kernel Address Sanitizer)
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +KASAN is a dynamic memory error detector that helps to find use-after-free and
>> +out-of-bounds bugs. It uses compile-time instrumentation to check every memory
>> +access.
>> +
>> +`Full documentation <../dev-tools/kasan.html>`__
>> +
>> +UBSAN (Undefined Behavior Sanitizer)
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +UBSAN relies on compiler instrumentation and runtime checks to detect undefined
>> +behavior. It is designed to find a variety of issues, including signed integer overflow,
>> +array index out of bounds, and more.
>> +
>> +`Full documentation <../dev-tools/ubsan.html>`__
>> +
>> +lockdep (Lock Dependency Validator)
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +lockdep is a runtime lock dependency validator that detects potential deadlocks
>> +and other locking-related issues in the kernel.
>> +It tracks lock acquisitions and releases, building a dependency graph that is
>> +analyzed for potential deadlocks.
>> +lockdep is especially useful for validating the correctness of lock ordering in
>> +the kernel.
>> +
>> +device coredump
>> +---------------
>> +
>> +Prerequisite: :code:`#include <linux/devcoredump.h>`
>> +
>> +Provides infrastructure through which the driver can provide arbitrary data to
>> +userland. It is most often used in conjunction with udev or similar userland
>> +infrastructure to listen for the kernel uevents, which indicates the dump is
>> +ready. Udev then usually has rules to copy that file somewhere for long-term
>> +storage and analysis as by default the data for the dump is automatically
>nit: didn't understand. maybe intended s/as/and/ ?

What I wanted to communicate here is that, by default dumps are cleaned
up automatically, if you want to store the files for later usage you
need to specifiy udev rules, which copy the dumps to a different
location.

I will try to clarify this for the next version

>
>> +cleaned up after 5 minutes.
>> +That data is then analyzed with driver-specific tools or GDB.
>> +
>> +You can find an example implementation at: :code:`drivers/media/platform/qcom/venus/core.c`
>> +
>> +**Copyright** |copy| 2024 : Collabora
>> diff --git a/Documentation/debugging/index.rst b/Documentation/debugging/index.rst
>> new file mode 100644
>> index 000000000000..7bdad2fa09e1
>> --- /dev/null
>> +++ b/Documentation/debugging/index.rst
>> @@ -0,0 +1,66 @@
>> +
>> +.. SPDX-License-Identifier: GPL-2.0
>> +.. include:: <isonum.txt>
>> +
>> +====================================================
>> +General debugging advice for Linux Kernel developers
>> +====================================================
>> +
>> +.. toctree::
>> +   :maxdepth: 1
>> +
>> +   driver_development_debugging_guide
>> +   userspace_debugging_guide
>> +
>> +.. only::  subproject and html
>> +
>> +   Indices
>> +   =======
>> +
>> +   * :ref:`genindex`
>> +
>> +General debugging advice
>> +========================
>> +
>> +Depending on the issue, a different set of tools is available to track down the
>> +problem or even to realize whether there is one in the first place.
>> +
>> +As a first step you have to figure out what kind of issue you want to debug.
>> +Depending on the answer, your methodology and choice of tools may vary.
>> +
>> +Do I need to debug with limited access?
>> +---------------------------------------
>> +
>> +Do you have limited access to the machine or are you unable to stop the running execution?
>> +
>> +In this case your debugging capability depends on built-in debugging support of
>> +provided distro kernel.
>> +The `userspace debugging guide <userspace_debugging_guide.html>`__ provides a
>> +brief overview over range of possible debugging tools in that situation. You
>> +can check the capability of your kernel, in most cases, by looking into config
>> +file within the /boot folder.
>> +
>> +Do I have root access to the system?
>> +------------------------------------
>> +
>> +Are you easily able to replace the module in question or to install a new kernel?
>> +
>> +In that case your range of available tools is a lot bigger, you can find the
>> +tools `here <driver_development_debugging_guide.html>`__.
>> +
>> +Is timing a factor?
>> +-------------------
>> +
>> +It is important to understand if the problem you want to debug manifests itself
>> +consistently (i.e. given a set of inputs you always get the same, incorrect
>> +output), or inconsistently. If it manifests itself inconsistently, some timing
>> +factor might be at play. If inserting delays into the code does change the
>> +behavior, then quite likely timing is a factor.
>> +
>> +When timing does alter the outcome of the code execution using a simple `printk
>> +<driver_development_debugging_guide.html#printk>`_ for debugging purposes won't
>> +work, a similar alternative is to use `trace_printk
>> +<driver_development_debugging_guide.html#trace-printk>`_, which logs the debug
>> +messages to the trace file instead of the kernel log.
>> +
>> +**Copyright** |copy| 2024 : Collabora
>> diff --git a/Documentation/debugging/userspace_debugging_guide.rst b/Documentation/debugging/userspace_debugging_guide.rst
>> new file mode 100644
>> index 000000000000..4d269a9ef913
>> --- /dev/null
>> +++ b/Documentation/debugging/userspace_debugging_guide.rst
>> @@ -0,0 +1,269 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +.. include:: <isonum.txt>
>> +
>> +==========================
>> +Userspace debugging advice
>> +==========================
>> +
>> +A brief overview of common tools to debug the Linux Kernel from userspace.
>> +For debugging advice aimed at driver developer go `here <driver_development_debugging_guide.html>`__.
>> +For general debugging advice, see `general-debugging-guide <index.html>`__.
>> +
>> +.. contents::
>> +    :depth: 3
>> +
>> +Available tools
>> +===============
>> +
>> +Dynamic debug
>> +-------------
>> +
>> +Mechanism to filter what ends up in the kernel log by dis-/en-abling log
>> +messages.
>> +
>> +Prerequisite: `CONFIG_DYNAMIC_DEBUG`
>> +
>> +.. _valid_dyndbg_prints:
>> +
>> +Dynamic debug is only able to target:
>> +
>> +- `pr_debug()`
>> +- `dev_dbg()`
>> +- `print_hex_dump_debug()`
>> +- `print_hex_dump_bytes()`
>> +
>> +Therefore the usability of this tool is quite limited in the media subsystem,
>> +because, as of now, there is no uniform rule for adding debug prints to the codebase,
>> +resulting in a variety of ways these prints are implemented.
>Shouldn't this explanation and some examples below go to the media
>specific document instead of here?

Oh yes you are right that has to go to the media guide, I am still a bit
unsure about the example because I haven't found a good general example
so far.

>Some parts in this patch are tricky to decide where to go, but
>suggesting to review once again.

Yes, thanks for highlighting.

>
>> +
>> +Also, note that most debug statements are implemented as a variation of
>> +`dprintk`, which have to be activated via a parameter in respective module,
>> +dynamic debug is unable to do that step for you.
>> +
>> +Here is one example, that enables all available `pr_debug()`'s within the file:
>> +::
>> +
>> +  $ alias ddcmd='echo $* > /proc/dynamic_debug/control'
>> +  $ ddcmd '-p; file v4l2-h264.c +p'
>> +  $ grep =p /proc/dynamic_debug/control
>> +   drivers/media/v4l2-core/v4l2-h264.c:372 [v4l2_h264]print_ref_list_b =p "ref_pic_list_b%u (cur_poc %u%c) %s"
>> +   drivers/media/v4l2-core/v4l2-h264.c:333 [v4l2_h264]print_ref_list_p =p "ref_pic_list_p (cur_poc %u%c) %s\n"
>> +
>> +**When should you use this over** `Ftrace`_ **?**
>> +
>> +- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development
>> +- When timing is not an issue, meaning if multiple `pr_debug()` statements in the code won't cause delays
>> +- When you care more about receiving specific log messages than tracing the pattern of how a function is called
>> +
>> +`Full documentation <../admin-guide/dynamic-debug-howto.html>`__
>> +
>> +Ftrace
>> +------
>> +
>> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE`
>> +
>> +Trace whenever the a file is opened:
>> +::
>> +
>> +  $ cd /sys/kernel/tracing
>> +  $ echo function > /sys/kernel/tracing/current_tracer
>> +  $ echo do_filep_open > set_ftrace_filter
>> +  $ echo 1 > tracing_on
>> +  $ cat trace
>> +       find-4624    [005] ...1. 580781.888166: do_filp_open <-do_sys_openat2
>> +       find-4624    [005] ...1. 580781.888237: do_filp_open <-do_sys_openat2
>> +       find-4624    [005] ...1. 580781.888361: do_filp_open <-do_sys_openat2
>> +
>> +.. _event_tracing:
>> +
>> +Activate a ftrace event on top of that:
>> +::
>> +
>> +  $ echo 1 > events/kmem/kfree/enable
>> +       find-5351    [005] ...1. 678288.910143: do_filp_open <-do_sys_openat2
>> +       find-5351    [005] ..... 678288.910185: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
>> +       find-5351    [005] ...1. 678288.910218: do_filp_open <-do_sys_openat2
>> +       find-5351    [005] ..... 678288.910260: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
>> +       find-5351    [005] ...1. 678288.910293: do_filp_open <-do_sys_openat2
>> +       find-5351    [005] ..... 678288.910345: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
>> +       find-5351    [005] ..... 678288.910389: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000007ba73e40
>> +       find-5351    [005] ..... 678288.910390: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000009e4850bc
>> +       find-5351    [005] ..... 678288.910391: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000004156f20f
>> +       find-5351    [005] ..... 678288.910393: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=00000000c7207e20
>> +       find-5351    [005] ..... 678288.910394: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000037c31d76
>> +       find-5351    [005] ..... 678288.910395: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000001922677
>> +
>> +.. _read_ftrace_log:
>> +
>> +**Reading the ftrace log**
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +The `trace` file can be read just like any other file (`cat`, `tail`, `head`,
>> +`vim`, etc.), the size of the file is limited by the `buffer_size_kb` (``echo
>> +1000 > buffer_size_kb``). The `trace_pipe` will behave similar to the `trace`
>> +file, but whenever you read from the file the content is consumed.
>> +
>> +**Kernelshark**
>> +~~~~~~~~~~~~~~~
>> +
>> +A GUI interface to visualize the traces as a graph and list view from the
>> +output of the `trace-cmd
>> +<https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/>`__ application.
>> +
>> +`Kernelshark documentation <https://kernelshark.org/Documentation.html>`_
>> +
>> +`Full Ftrace documentation <../trace/ftrace.html>`__
>> +
>> +Perf & alternatives
>> +-------------------
>> +
>> +The tools mentioned above provide ways to inspect kernel code, results, variable values, etc.
>> +Sometimes you have to find out first where to look and for those cases a box of performance tracking tools can help you to frame the issue.
>nit: add comma. better readability.
>s/and for those cases /and for those cases, /

ack

>
>> +
>> +.. _performance:
>> +
>> +**Why should you do a performance analysis?**
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +A performance analysis is a good first step when among other reasons:
>> +
>> +- you cannot define the issue
>> +- you do not know where it occurs
>> +- the running system should not be interrupted or it is a remote system, where you cannot install a new module/kernel
>> +
>> +.. _linux-tools:
>> +
>> +**How to do a simple analysis with linux tools?**
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +For the start of a performance analysis, you can start with the usual tools like:
>> +
>> +- `top` / `htop` / `atop` (*get an overview of the system load, see spikes on specific processes*)
>> +- `mpstat -P ALL` (*look at the load distribution among CPUs*)
>> +- `iostat -x` (*observe input and output devices utilization and performance*)
>> +- `vmstat` (*overview of memory usage on the system*)
>> +- `pidstat` (*similar to* `vmstat` *but per process, to dial it down to the target*)
>> +- `strace -tp $PID` (*once you know the process, you can figure out how it communicates with the Kernel*)
>> +
>> +These should help to figure out restrict the areas to look at sufficiently.
>nit: s/figure out restrict/narrow down/

ack

>
>> +
>> +**Diving deeper with perf**
>> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +The **perf** tool provides a series of metrics and events to further dial down on issues.
>> +
>> +Prerequisite: build or install perf on your system
>> +
>> +Gather statistics data for finding all files starting with `gcc` in `/usr`
>> +::
>> +
>> +       # perf stat -d find /usr -name 'gcc*' | wc -l
>> +
>> +        Performance counter stats for 'find /usr -name gcc*':
>> +
>> +                  1277.81 msec task-clock                       #    0.997 CPUs utilized
>> +                        9      context-switches                 #    7.043 /sec
>> +                        1      cpu-migrations                   #    0.783 /sec
>> +                      704      page-faults                      #  550.943 /sec
>> +                766548897      cycles                           #    0.600 GHz                         (97.15%)
>> +                798285467      instructions                     #    1.04  insn per cycle              (97.15%)
>> +                 57582731      branches                         #   45.064 M/sec                       (2.85%)
>> +                  3842573      branch-misses                    #    6.67% of all branches             (97.15%)
>> +                281616097      L1-dcache-loads                  #  220.390 M/sec                       (97.15%)
>> +                  4220975      L1-dcache-load-misses            #    1.50% of all L1-dcache accesses   (97.15%)
>> +          <not supported>      LLC-loads
>> +          <not supported>      LLC-load-misses
>> +
>> +              1.281746009 seconds time elapsed
>> +
>> +              0.508796000 seconds user
>> +              0.773209000 seconds sys
>> +
>> +
>> +       52
>> +
>> +The availability of events and metrics depends on the system you are running.
>> +
>> +`Full documentation <https://perf.wiki.kernel.org/index.php/Main_Page>`__
>> +
>> +**Perfetto**
>> +~~~~~~~~~~~~
>> +
>> +A set of tools to measure and analyze how well applications and systems perform.
>> +You can use it to:
>> +
>> +* identify bottlenecks
>> +* optimize code
>> +* make software run faster and more efficiently.
>> +
>> +**What is the difference between perfetto and perf?**
>> +
>> +* perf is tool as part of and specialized for the Linux Kernel and has CLI user
>> +  interface.
>> +* perfetto cross-platform performance analysis stack, has extended
>> +  functionality into userspace and provides a WEB user interface.
>> +
>> +`Full documentation <https://perfetto.dev/docs/>`__
>> +
>> +.. _kernel_panic_analysis_tools:
>> +
>> +Kernel panic analysis tools
>> +---------------------------
>> +
>> +  To analyse the crash dump please use `Kdump` & `Kexec`.
>> +
>> +  `Full documentation <../admin-guide/kdump/kdump.html>`__
>> +
>> +  In order to find the corresponding line in the code you can use `faddr2line
>> +  <https://elixir.bootlin.com/linux/latest/source/scripts/faddr2line>`__, note
>> +  that you need to enable `CONFIG_DEBUG_INFO` for that to work.
>> +
>> +  An alternative to using `faddr2line` is the use of `objdump` (and it's
>> +  derivatives for the different platforms like `aarch64-linux-gnu-objdump`),
>> +  take this line as an example:
>> +
>> +  `[  +0.000240]  rkvdec_device_run+0x50/0x138 [rockchip_vdec]`.
>> +
>> +  We can find the corresponding line of code by executing:
>> +  ::
>> +
>> +    aarch64-linux-gnu-objdump -dS drivers/staging/media/rkvdec/rockchip-vdec.ko | grep rkvdec_device_run\>: -A 40
>> +    0000000000000ac8 <rkvdec_device_run>:
>> +     ac8:      d503201f        nop
>> +     acc:      d503201f        nop
>> +    {
>> +     ad0:      d503233f        paciasp
>> +     ad4:      a9bd7bfd        stp     x29, x30, [sp, #-48]!
>> +     ad8:      910003fd        mov     x29, sp
>> +     adc:      a90153f3        stp     x19, x20, [sp, #16]
>> +     ae0:      a9025bf5        stp     x21, x22, [sp, #32]
>> +        const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
>> +     ae4:      f9411814        ldr     x20, [x0, #560]
>> +        struct rkvdec_dev *rkvdec = ctx->dev;
>> +     ae8:      f9418015        ldr     x21, [x0, #768]
>> +        if (WARN_ON(!desc))
>> +     aec:      b4000654        cbz     x20, bb4 <rkvdec_device_run+0xec>
>> +        ret = pm_runtime_resume_and_get(rkvdec->dev);
>> +     af0:      f943d2b6        ldr     x22, [x21, #1952]
>> +        ret = __pm_runtime_resume(dev, RPM_GET_PUT);
>> +     af4:      aa0003f3        mov     x19, x0
>> +     af8:      52800081        mov     w1, #0x4                        // #4
>> +     afc:      aa1603e0        mov     x0, x22
>> +     b00:      94000000        bl      0 <__pm_runtime_resume>
>> +        if (ret < 0) {
>> +     b04:      37f80340        tbnz    w0, #31, b6c <rkvdec_device_run+0xa4>
>> +        dev_warn(rkvdec->dev, "Not good\n");
>> +     b08:      f943d2a0        ldr     x0, [x21, #1952]
>> +     b0c:      90000001        adrp    x1, 0 <rkvdec_try_ctrl-0x8>
>> +     b10:      91000021        add     x1, x1, #0x0
>> +     b14:      94000000        bl      0 <_dev_warn>
>> +        *bad = 1;
>> +     b18:      d2800001        mov     x1, #0x0                        // #0
>> +     ...
>> +
>> +
>> +  To find the matching line we just have to add `0x50` (from
>> +  `rkvdec_device_run+0x50`) to `0xac8` (from `0000000000000ac8
>> +  <rkvdec_device_run>:`), which yields `0xb18` corresponding with `*bad = 1`.
>I didn't understand this part. Can you explain?

I try to explain in that line how to interpret the output above.
Meaning, in this line from the crash dump:

`[  +0.000240]  rkvdec_device_run+0x50/0x138 [rockchip_vdec]`

I can take the 0x50 as offset, which I have to add to the base address
of the corresponding function, which I find in this line:

     0000000000000ac8 <rkvdec_device_run>:

The result of 0xac8 + 0x50 = 0xb18
And when I search for that address within the function I get the
following line:

         *bad = 1;
      b18:      d2800001        mov     x1, #0x0                        // #0

Which is the offending line, I will try to clarify this in the next
version.

Regards,
Sebastian

>
>> +
>> +**Copyright** |copy| 2024 : Collabora
>> diff --git a/Documentation/index.rst b/Documentation/index.rst
>> index f9f525f4c0dd..eb8de7ba8e41 100644
>> --- a/Documentation/index.rst
>> +++ b/Documentation/index.rst
>> @@ -57,6 +57,7 @@ Various other manuals with useful information for all kernel developers.
>>     Testing guide <dev-tools/testing-overview>
>>     Hacking guide <kernel-hacking/index>
>>     Tracing <trace/index>
>> +   Debugging <debugging/index>
>>     Fault injection <fault-injection/index>
>>     Livepatching <livepatch/index>
>>     Rust <rust/index>
>> @@ -76,6 +77,7 @@ developers seeking information on the kernel's user-space APIs.
>>     Build system <kbuild/index>
>>     Reporting issues <admin-guide/reporting-issues.rst>
>>     Userspace tools <tools/index>
>> +   Userspace debugging tools <debugging/userspace_debugging_guide.rst>
>>     Userspace API <userspace-api/index>
>>
>>  See also: the `Linux man pages <https://www.kernel.org/doc/man-pages/>`_,
>>
>> --
>> 2.25.1
>>
>

Steve Cho Oct. 4, 2024, 11:30 p.m. UTC | #4

Thank you Sebastian.

On Fri, Oct 4, 2024 at 3:13 AM Sebastian Fricke
<[e-mail]> wrote:
>
> Hey Steve,
>
> On 03.10.2024 16:06, Steve Cho wrote:
> >Few minor comments.
> >
> >On Tue, Sep 24, 2024 at 1:47 AM Sebastian Fricke
> ><[e-mail]> wrote:
> >>
> >> This idea was formed after noticing that new developers experience
> >> certain difficulty to navigate within the multitude of different
> >> debugging options in the Kernel and while there often is good
> >> documentation for the tools, the developer has to know first that they
> >> exist and where to find them.
> >> Add a general debugging section to the Kernel documentation, as an
> >> easily locatable entry point to other documentation and as a general
> >> guideline for the topic.
> >>
> >> Signed-off-by: Sebastian Fricke <[e-mail]>
> >> ---
> >>  .../driver_development_debugging_guide.rst         | 193 +++++++++++++++
> >>  Documentation/debugging/index.rst                  |  66 +++++
> >>  .../debugging/userspace_debugging_guide.rst        | 269 +++++++++++++++++++++
> >>  Documentation/index.rst                            |   2 +
> >>  4 files changed, 530 insertions(+)
> >>
> >> diff --git a/Documentation/debugging/driver_development_debugging_guide.rst b/Documentation/debugging/driver_development_debugging_guide.rst
> >> new file mode 100644
> >> index 000000000000..c750f63ac1d3
> >> --- /dev/null
> >> +++ b/Documentation/debugging/driver_development_debugging_guide.rst
> >> @@ -0,0 +1,193 @@
> >> +.. SPDX-License-Identifier: GPL-2.0
> >> +.. include:: <isonum.txt>
> >> +
> >> +========================================
> >> +Debugging advice for driver development
> >> +========================================
> >> +
> >> +This document serves as a general starting point and lookup for debugging device
> >> +drivers.
> >> +While this guide focuses on debugging that requires re-compiling the
> >> +module/kernel, the `userspace-debugging-guide <userspace_debugging_guide.html>`__
> >> +will guide you through tools like dynamic debug, ftrace and other tools useful
> >> +for debugging issues and behavior.
> >> +For general debugging advice, see `general-debugging-guide <index.html>`__.
> >> +
> >> +.. contents::
> >> +    :depth: 3
> >> +
> >> +Available tools
> >> +===============
> >> +
> >> +Printk & friends
> >> +----------------
> >> +
> >> +These are derivatives of printf() with varying destinations and support for being dynamically turned on or off, or lack thereof.
> >> +
> >> +.. _printk:
> >> +
> >> +**Simple printk**
> >> +~~~~~~~~~~~~~~~~~
> >> +
> >> +The classic, can be used to great effect for quick and dirty development
> >> +of new modules or to extract arbitrary necessary data for troubleshooting.
> >> +
> >> +Prerequisite: :code:`CONFIG_PRINTK` (usually enabled by default)
> >> +
> >> +**Pros**:
> >> +
> >> +- No need to learn anything, simple to use
> >> +- Easy to modify exactly to your needs (formatting of the data (See: `format specifiers <../core-api/printk-formats.html>`__), visibility in the log)
> >> +- Can cause delays in the execution of the code (beneficial to confirm whether timing is a factor)
> >I experienced this too before, but isn't it generalizing too much here?
> >I mean it is not easy to observe timing issue with printk.
>
> True it is not very easy to do this deterministically, but I thought it
> might be helpful as an idea, in case an issue is flaky. A few print
> statements might cause enough delay to make the issue more reproducible,
> that was at least my experience in the past. Maybe I could word it
> better or this potential positive aspect can be derived from the
> negative aspect below.
Ack.

> >
> >> +
> >> +**Cons**:
> >> +
> >> +- Requires rebuilding the kernel/module
> >> +- Can cause delays in the execution of the code (which can cause issues to be not reproducible)
> >> +
> >> +`Full documentation <../core-api/printk-basics.html>`__
> >> +
> >> +.. _trace_printk:
> >> +
> >> +**Trace_printk**
> >> +~~~~~~~~~~~~~~~~
> >> +
> >> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE` & :code:`#include <linux/ftrace.h>`
> >> +
> >> +It is a tiny bit less comfortable to use than `printk`_, because you will have
> >> +to read the messages from the trace file (See: `Reading the ftrace log
> >> +<userspace_debugging_guide.html#read-the-ftrace-log>`_ instead of from the
> >> +kernel log, but very useful when printk adds unwanted delays into the code
> >> +execution, causing issues to be flaky or hidden.)
> >> +
> >> +If the processing of this still causes timing issues then you can try `trace_puts()`.
> >> +
> >> +`Full Documentation <../driver-api/basics.html#c.trace_printk>`__
> >> +
> >> +**dev_dbg**
> >> +~~~~~~~~~~~
> >> +
> >> +Print statement, which can be target by `dynamic debug
> >nit: s/target/targeted
> >
> >> +<userspace_debugging_guide.html#dynamic-debug>`__, that contains additional
> >> +information about the device used within the context.
> >> +
> >> +**When is it appropriate to leave a debug print in the code?**
> >> +
> >> +Permanent debug statements have to be useful for a developer to troubleshoot
> >> +driver misbehavior. Judging that is a bit more of an art than a science, but
> >> +some guidelines are in the `Coding style guide
> >> +<../process/coding-style.html#printing-kernel-messages>`__.
> >> +
> >> +**Custom printk**
> >> +~~~~~~~~~~~~~~~~~
> >> +
> >> +Example:
> >> +::
> >> +
> >> +  #define core_dbg(fmt, arg...) do { \
> >> +         if (core_debug) \
> >> +                 printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \
> >> +         } while (0)
> >> +
> >> +**When should you do this?**
> >> +
> >> +It is better to just use a `pr_debug()`, which can later be turned on/off with
> >> +dynamic debug. Additionally, a lot of drivers activate these prints via a
> >> +variable like `core_debug` set by a module parameter. However, Module
> >> +parameters `are not recommended anymore
> >> +<https://lkml.org/lkml/2024/3/27/163>`_.
> >> +
> >> +Ftrace
> >> +------
> >> +
> >> +**Creating custom Ftrace tracepoint**
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +Here is a basic description of `how to implement new tracepoints <../trace/tracepoints.html#usage>`__.
> >> +
> >> +`Full event tracing documentation <../trace/events.html>`__
> >> +
> >> +`Full Ftrace documentation <../trace/ftrace.html>`__
> >> +
> >> +DebugFS
> >> +-------
> >> +
> >> +Prerequisite: :code:`CONFIG_DEBUG_FS` & :code:`#include <linux/debugfs.h>`
> >> +
> >> +DebugFS differs from the other approaches of debugging, as it doesn't write messages to the kernel log nor add traces to the code. Instead it allows the developer to handle a set of files.
> >> +With these files you can either store values of variables or make register/memory dumps or you can make these files writable and modify values/settings in the driver.
> >> +Possible use-cases among others:
> >> +
> >> +- Store register values
> >> +- Keep track of variables
> >> +- Store errors
> >> +- Store settings
> >> +- Toggle a setting like debug on/off
> >> +- Error injection
> >> +
> >> +This is especially useful, when the size of a data dump would be hard to digest as
> >> +part of the general kernel log (for example when dumping raw bitstream data) or
> >> +when you are not interested in all the values all the time, but with the
> >> +possibility to inspect them.
> >> +
> >> +The general idea is:
> >> +
> >> +- Create a directory during probe (`struct dentry *parent = debugfs_create_dir("my_driver", NULL);`)
> >> +- Create a file (`debugfs_create_u32("my_value", 444, parent, &my_variable);`)
> >> +
> >> +  - In this example the file is found in `/sys/kernel/debug/my_driver/my_value` (with read permissions for user/group/all)
> >> +  - any update of `my_variable` will update the value in the file
> >> +
> >> +- Clean up the folder when removing the device (`debugfs_remove_recursive(parent);`)
> >> +
> >> +`Full documentation <../filesystems/debugfs.html>`__
> >> +
> >> +.. _error_checking:
> >> +
> >> +KASAN, UBSAN, lockdep and other error checkers
> >> +----------------------------------------------
> >> +
> >> +KASAN (Kernel Address Sanitizer)
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +KASAN is a dynamic memory error detector that helps to find use-after-free and
> >> +out-of-bounds bugs. It uses compile-time instrumentation to check every memory
> >> +access.
> >> +
> >> +`Full documentation <../dev-tools/kasan.html>`__
> >> +
> >> +UBSAN (Undefined Behavior Sanitizer)
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +UBSAN relies on compiler instrumentation and runtime checks to detect undefined
> >> +behavior. It is designed to find a variety of issues, including signed integer overflow,
> >> +array index out of bounds, and more.
> >> +
> >> +`Full documentation <../dev-tools/ubsan.html>`__
> >> +
> >> +lockdep (Lock Dependency Validator)
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +lockdep is a runtime lock dependency validator that detects potential deadlocks
> >> +and other locking-related issues in the kernel.
> >> +It tracks lock acquisitions and releases, building a dependency graph that is
> >> +analyzed for potential deadlocks.
> >> +lockdep is especially useful for validating the correctness of lock ordering in
> >> +the kernel.
> >> +
> >> +device coredump
> >> +---------------
> >> +
> >> +Prerequisite: :code:`#include <linux/devcoredump.h>`
> >> +
> >> +Provides infrastructure through which the driver can provide arbitrary data to
> >> +userland. It is most often used in conjunction with udev or similar userland
> >> +infrastructure to listen for the kernel uevents, which indicates the dump is
> >> +ready. Udev then usually has rules to copy that file somewhere for long-term
> >> +storage and analysis as by default the data for the dump is automatically
> >nit: didn't understand. maybe intended s/as/and/ ?
>
> What I wanted to communicate here is that, by default dumps are cleaned
> up automatically, if you want to store the files for later usage you
> need to specifiy udev rules, which copy the dumps to a different
> location.
>
> I will try to clarify this for the next version
Got it. It's just that wording was not clear to me here.

>
> >
> >> +cleaned up after 5 minutes.
> >> +That data is then analyzed with driver-specific tools or GDB.
> >> +
> >> +You can find an example implementation at: :code:`drivers/media/platform/qcom/venus/core.c`
> >> +
> >> +**Copyright** |copy| 2024 : Collabora
> >> diff --git a/Documentation/debugging/index.rst b/Documentation/debugging/index.rst
> >> new file mode 100644
> >> index 000000000000..7bdad2fa09e1
> >> --- /dev/null
> >> +++ b/Documentation/debugging/index.rst
> >> @@ -0,0 +1,66 @@
> >> +
> >> +.. SPDX-License-Identifier: GPL-2.0
> >> +.. include:: <isonum.txt>
> >> +
> >> +====================================================
> >> +General debugging advice for Linux Kernel developers
> >> +====================================================
> >> +
> >> +.. toctree::
> >> +   :maxdepth: 1
> >> +
> >> +   driver_development_debugging_guide
> >> +   userspace_debugging_guide
> >> +
> >> +.. only::  subproject and html
> >> +
> >> +   Indices
> >> +   =======
> >> +
> >> +   * :ref:`genindex`
> >> +
> >> +General debugging advice
> >> +========================
> >> +
> >> +Depending on the issue, a different set of tools is available to track down the
> >> +problem or even to realize whether there is one in the first place.
> >> +
> >> +As a first step you have to figure out what kind of issue you want to debug.
> >> +Depending on the answer, your methodology and choice of tools may vary.
> >> +
> >> +Do I need to debug with limited access?
> >> +---------------------------------------
> >> +
> >> +Do you have limited access to the machine or are you unable to stop the running execution?
> >> +
> >> +In this case your debugging capability depends on built-in debugging support of
> >> +provided distro kernel.
> >> +The `userspace debugging guide <userspace_debugging_guide.html>`__ provides a
> >> +brief overview over range of possible debugging tools in that situation. You
> >> +can check the capability of your kernel, in most cases, by looking into config
> >> +file within the /boot folder.
> >> +
> >> +Do I have root access to the system?
> >> +------------------------------------
> >> +
> >> +Are you easily able to replace the module in question or to install a new kernel?
> >> +
> >> +In that case your range of available tools is a lot bigger, you can find the
> >> +tools `here <driver_development_debugging_guide.html>`__.
> >> +
> >> +Is timing a factor?
> >> +-------------------
> >> +
> >> +It is important to understand if the problem you want to debug manifests itself
> >> +consistently (i.e. given a set of inputs you always get the same, incorrect
> >> +output), or inconsistently. If it manifests itself inconsistently, some timing
> >> +factor might be at play. If inserting delays into the code does change the
> >> +behavior, then quite likely timing is a factor.
> >> +
> >> +When timing does alter the outcome of the code execution using a simple `printk
> >> +<driver_development_debugging_guide.html#printk>`_ for debugging purposes won't
> >> +work, a similar alternative is to use `trace_printk
> >> +<driver_development_debugging_guide.html#trace-printk>`_, which logs the debug
> >> +messages to the trace file instead of the kernel log.
> >> +
> >> +**Copyright** |copy| 2024 : Collabora
> >> diff --git a/Documentation/debugging/userspace_debugging_guide.rst b/Documentation/debugging/userspace_debugging_guide.rst
> >> new file mode 100644
> >> index 000000000000..4d269a9ef913
> >> --- /dev/null
> >> +++ b/Documentation/debugging/userspace_debugging_guide.rst
> >> @@ -0,0 +1,269 @@
> >> +.. SPDX-License-Identifier: GPL-2.0
> >> +.. include:: <isonum.txt>
> >> +
> >> +==========================
> >> +Userspace debugging advice
> >> +==========================
> >> +
> >> +A brief overview of common tools to debug the Linux Kernel from userspace.
> >> +For debugging advice aimed at driver developer go `here <driver_development_debugging_guide.html>`__.
> >> +For general debugging advice, see `general-debugging-guide <index.html>`__.
> >> +
> >> +.. contents::
> >> +    :depth: 3
> >> +
> >> +Available tools
> >> +===============
> >> +
> >> +Dynamic debug
> >> +-------------
> >> +
> >> +Mechanism to filter what ends up in the kernel log by dis-/en-abling log
> >> +messages.
> >> +
> >> +Prerequisite: `CONFIG_DYNAMIC_DEBUG`
> >> +
> >> +.. _valid_dyndbg_prints:
> >> +
> >> +Dynamic debug is only able to target:
> >> +
> >> +- `pr_debug()`
> >> +- `dev_dbg()`
> >> +- `print_hex_dump_debug()`
> >> +- `print_hex_dump_bytes()`
> >> +
> >> +Therefore the usability of this tool is quite limited in the media subsystem,
> >> +because, as of now, there is no uniform rule for adding debug prints to the codebase,
> >> +resulting in a variety of ways these prints are implemented.
> >Shouldn't this explanation and some examples below go to the media
> >specific document instead of here?
>
> Oh yes you are right that has to go to the media guide, I am still a bit
> unsure about the example because I haven't found a good general example
> so far.
>
> >Some parts in this patch are tricky to decide where to go, but
> >suggesting to review once again.
>
> Yes, thanks for highlighting.
>
> >
> >> +
> >> +Also, note that most debug statements are implemented as a variation of
> >> +`dprintk`, which have to be activated via a parameter in respective module,
> >> +dynamic debug is unable to do that step for you.
> >> +
> >> +Here is one example, that enables all available `pr_debug()`'s within the file:
> >> +::
> >> +
> >> +  $ alias ddcmd='echo $* > /proc/dynamic_debug/control'
> >> +  $ ddcmd '-p; file v4l2-h264.c +p'
> >> +  $ grep =p /proc/dynamic_debug/control
> >> +   drivers/media/v4l2-core/v4l2-h264.c:372 [v4l2_h264]print_ref_list_b =p "ref_pic_list_b%u (cur_poc %u%c) %s"
> >> +   drivers/media/v4l2-core/v4l2-h264.c:333 [v4l2_h264]print_ref_list_p =p "ref_pic_list_p (cur_poc %u%c) %s\n"
> >> +
> >> +**When should you use this over** `Ftrace`_ **?**
> >> +
> >> +- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development
> >> +- When timing is not an issue, meaning if multiple `pr_debug()` statements in the code won't cause delays
> >> +- When you care more about receiving specific log messages than tracing the pattern of how a function is called
> >> +
> >> +`Full documentation <../admin-guide/dynamic-debug-howto.html>`__
> >> +
> >> +Ftrace
> >> +------
> >> +
> >> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE`
> >> +
> >> +Trace whenever the a file is opened:
> >> +::
> >> +
> >> +  $ cd /sys/kernel/tracing
> >> +  $ echo function > /sys/kernel/tracing/current_tracer
> >> +  $ echo do_filep_open > set_ftrace_filter
> >> +  $ echo 1 > tracing_on
> >> +  $ cat trace
> >> +       find-4624    [005] ...1. 580781.888166: do_filp_open <-do_sys_openat2
> >> +       find-4624    [005] ...1. 580781.888237: do_filp_open <-do_sys_openat2
> >> +       find-4624    [005] ...1. 580781.888361: do_filp_open <-do_sys_openat2
> >> +
> >> +.. _event_tracing:
> >> +
> >> +Activate a ftrace event on top of that:
> >> +::
> >> +
> >> +  $ echo 1 > events/kmem/kfree/enable
> >> +       find-5351    [005] ...1. 678288.910143: do_filp_open <-do_sys_openat2
> >> +       find-5351    [005] ..... 678288.910185: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
> >> +       find-5351    [005] ...1. 678288.910218: do_filp_open <-do_sys_openat2
> >> +       find-5351    [005] ..... 678288.910260: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
> >> +       find-5351    [005] ...1. 678288.910293: do_filp_open <-do_sys_openat2
> >> +       find-5351    [005] ..... 678288.910345: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
> >> +       find-5351    [005] ..... 678288.910389: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000007ba73e40
> >> +       find-5351    [005] ..... 678288.910390: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000009e4850bc
> >> +       find-5351    [005] ..... 678288.910391: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000004156f20f
> >> +       find-5351    [005] ..... 678288.910393: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=00000000c7207e20
> >> +       find-5351    [005] ..... 678288.910394: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000037c31d76
> >> +       find-5351    [005] ..... 678288.910395: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000001922677
> >> +
> >> +.. _read_ftrace_log:
> >> +
> >> +**Reading the ftrace log**
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +The `trace` file can be read just like any other file (`cat`, `tail`, `head`,
> >> +`vim`, etc.), the size of the file is limited by the `buffer_size_kb` (``echo
> >> +1000 > buffer_size_kb``). The `trace_pipe` will behave similar to the `trace`
> >> +file, but whenever you read from the file the content is consumed.
> >> +
> >> +**Kernelshark**
> >> +~~~~~~~~~~~~~~~
> >> +
> >> +A GUI interface to visualize the traces as a graph and list view from the
> >> +output of the `trace-cmd
> >> +<https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/>`__ application.
> >> +
> >> +`Kernelshark documentation <https://kernelshark.org/Documentation.html>`_
> >> +
> >> +`Full Ftrace documentation <../trace/ftrace.html>`__
> >> +
> >> +Perf & alternatives
> >> +-------------------
> >> +
> >> +The tools mentioned above provide ways to inspect kernel code, results, variable values, etc.
> >> +Sometimes you have to find out first where to look and for those cases a box of performance tracking tools can help you to frame the issue.
> >nit: add comma. better readability.
> >s/and for those cases /and for those cases, /
>
> ack
>
> >
> >> +
> >> +.. _performance:
> >> +
> >> +**Why should you do a performance analysis?**
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +A performance analysis is a good first step when among other reasons:
> >> +
> >> +- you cannot define the issue
> >> +- you do not know where it occurs
> >> +- the running system should not be interrupted or it is a remote system, where you cannot install a new module/kernel
> >> +
> >> +.. _linux-tools:
> >> +
> >> +**How to do a simple analysis with linux tools?**
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +For the start of a performance analysis, you can start with the usual tools like:
> >> +
> >> +- `top` / `htop` / `atop` (*get an overview of the system load, see spikes on specific processes*)
> >> +- `mpstat -P ALL` (*look at the load distribution among CPUs*)
> >> +- `iostat -x` (*observe input and output devices utilization and performance*)
> >> +- `vmstat` (*overview of memory usage on the system*)
> >> +- `pidstat` (*similar to* `vmstat` *but per process, to dial it down to the target*)
> >> +- `strace -tp $PID` (*once you know the process, you can figure out how it communicates with the Kernel*)
> >> +
> >> +These should help to figure out restrict the areas to look at sufficiently.
> >nit: s/figure out restrict/narrow down/
>
> ack
>
> >
> >> +
> >> +**Diving deeper with perf**
> >> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +The **perf** tool provides a series of metrics and events to further dial down on issues.
> >> +
> >> +Prerequisite: build or install perf on your system
> >> +
> >> +Gather statistics data for finding all files starting with `gcc` in `/usr`
> >> +::
> >> +
> >> +       # perf stat -d find /usr -name 'gcc*' | wc -l
> >> +
> >> +        Performance counter stats for 'find /usr -name gcc*':
> >> +
> >> +                  1277.81 msec task-clock                       #    0.997 CPUs utilized
> >> +                        9      context-switches                 #    7.043 /sec
> >> +                        1      cpu-migrations                   #    0.783 /sec
> >> +                      704      page-faults                      #  550.943 /sec
> >> +                766548897      cycles                           #    0.600 GHz                         (97.15%)
> >> +                798285467      instructions                     #    1.04  insn per cycle              (97.15%)
> >> +                 57582731      branches                         #   45.064 M/sec                       (2.85%)
> >> +                  3842573      branch-misses                    #    6.67% of all branches             (97.15%)
> >> +                281616097      L1-dcache-loads                  #  220.390 M/sec                       (97.15%)
> >> +                  4220975      L1-dcache-load-misses            #    1.50% of all L1-dcache accesses   (97.15%)
> >> +          <not supported>      LLC-loads
> >> +          <not supported>      LLC-load-misses
> >> +
> >> +              1.281746009 seconds time elapsed
> >> +
> >> +              0.508796000 seconds user
> >> +              0.773209000 seconds sys
> >> +
> >> +
> >> +       52
> >> +
> >> +The availability of events and metrics depends on the system you are running.
> >> +
> >> +`Full documentation <https://perf.wiki.kernel.org/index.php/Main_Page>`__
> >> +
> >> +**Perfetto**
> >> +~~~~~~~~~~~~
> >> +
> >> +A set of tools to measure and analyze how well applications and systems perform.
> >> +You can use it to:
> >> +
> >> +* identify bottlenecks
> >> +* optimize code
> >> +* make software run faster and more efficiently.
> >> +
> >> +**What is the difference between perfetto and perf?**
> >> +
> >> +* perf is tool as part of and specialized for the Linux Kernel and has CLI user
> >> +  interface.
> >> +* perfetto cross-platform performance analysis stack, has extended
> >> +  functionality into userspace and provides a WEB user interface.
> >> +
> >> +`Full documentation <https://perfetto.dev/docs/>`__
> >> +
> >> +.. _kernel_panic_analysis_tools:
> >> +
> >> +Kernel panic analysis tools
> >> +---------------------------
> >> +
> >> +  To analyse the crash dump please use `Kdump` & `Kexec`.
> >> +
> >> +  `Full documentation <../admin-guide/kdump/kdump.html>`__
> >> +
> >> +  In order to find the corresponding line in the code you can use `faddr2line
> >> +  <https://elixir.bootlin.com/linux/latest/source/scripts/faddr2line>`__, note
> >> +  that you need to enable `CONFIG_DEBUG_INFO` for that to work.
> >> +
> >> +  An alternative to using `faddr2line` is the use of `objdump` (and it's
> >> +  derivatives for the different platforms like `aarch64-linux-gnu-objdump`),
> >> +  take this line as an example:
> >> +
> >> +  `[  +0.000240]  rkvdec_device_run+0x50/0x138 [rockchip_vdec]`.
> >> +
> >> +  We can find the corresponding line of code by executing:
> >> +  ::
> >> +
> >> +    aarch64-linux-gnu-objdump -dS drivers/staging/media/rkvdec/rockchip-vdec.ko | grep rkvdec_device_run\>: -A 40
> >> +    0000000000000ac8 <rkvdec_device_run>:
> >> +     ac8:      d503201f        nop
> >> +     acc:      d503201f        nop
> >> +    {
> >> +     ad0:      d503233f        paciasp
> >> +     ad4:      a9bd7bfd        stp     x29, x30, [sp, #-48]!
> >> +     ad8:      910003fd        mov     x29, sp
> >> +     adc:      a90153f3        stp     x19, x20, [sp, #16]
> >> +     ae0:      a9025bf5        stp     x21, x22, [sp, #32]
> >> +        const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
> >> +     ae4:      f9411814        ldr     x20, [x0, #560]
> >> +        struct rkvdec_dev *rkvdec = ctx->dev;
> >> +     ae8:      f9418015        ldr     x21, [x0, #768]
> >> +        if (WARN_ON(!desc))
> >> +     aec:      b4000654        cbz     x20, bb4 <rkvdec_device_run+0xec>
> >> +        ret = pm_runtime_resume_and_get(rkvdec->dev);
> >> +     af0:      f943d2b6        ldr     x22, [x21, #1952]
> >> +        ret = __pm_runtime_resume(dev, RPM_GET_PUT);
> >> +     af4:      aa0003f3        mov     x19, x0
> >> +     af8:      52800081        mov     w1, #0x4                        // #4
> >> +     afc:      aa1603e0        mov     x0, x22
> >> +     b00:      94000000        bl      0 <__pm_runtime_resume>
> >> +        if (ret < 0) {
> >> +     b04:      37f80340        tbnz    w0, #31, b6c <rkvdec_device_run+0xa4>
> >> +        dev_warn(rkvdec->dev, "Not good\n");
> >> +     b08:      f943d2a0        ldr     x0, [x21, #1952]
> >> +     b0c:      90000001        adrp    x1, 0 <rkvdec_try_ctrl-0x8>
> >> +     b10:      91000021        add     x1, x1, #0x0
> >> +     b14:      94000000        bl      0 <_dev_warn>
> >> +        *bad = 1;
> >> +     b18:      d2800001        mov     x1, #0x0                        // #0
> >> +     ...
> >> +
> >> +
> >> +  To find the matching line we just have to add `0x50` (from
> >> +  `rkvdec_device_run+0x50`) to `0xac8` (from `0000000000000ac8
> >> +  <rkvdec_device_run>:`), which yields `0xb18` corresponding with `*bad = 1`.
> >I didn't understand this part. Can you explain?
>
> I try to explain in that line how to interpret the output above.
> Meaning, in this line from the crash dump:
>
> `[  +0.000240]  rkvdec_device_run+0x50/0x138 [rockchip_vdec]`
>
> I can take the 0x50 as offset, which I have to add to the base address
> of the corresponding function, which I find in this line:
>
>      0000000000000ac8 <rkvdec_device_run>:
>
> The result of 0xac8 + 0x50 = 0xb18
> And when I search for that address within the function I get the
> following line:
>
>          *bad = 1;
>       b18:      d2800001        mov     x1, #0x0                        // #0
>
> Which is the offending line, I will try to clarify this in the next
> version.
Got it. Thank you for the clarification.

>
> Regards,
> Sebastian
>
> >
> >> +
> >> +**Copyright** |copy| 2024 : Collabora
> >> diff --git a/Documentation/index.rst b/Documentation/index.rst
> >> index f9f525f4c0dd..eb8de7ba8e41 100644
> >> --- a/Documentation/index.rst
> >> +++ b/Documentation/index.rst
> >> @@ -57,6 +57,7 @@ Various other manuals with useful information for all kernel developers.
> >>     Testing guide <dev-tools/testing-overview>
> >>     Hacking guide <kernel-hacking/index>
> >>     Tracing <trace/index>
> >> +   Debugging <debugging/index>
> >>     Fault injection <fault-injection/index>
> >>     Livepatching <livepatch/index>
> >>     Rust <rust/index>
> >> @@ -76,6 +77,7 @@ developers seeking information on the kernel's user-space APIs.
> >>     Build system <kbuild/index>
> >>     Reporting issues <admin-guide/reporting-issues.rst>
> >>     Userspace tools <tools/index>
> >> +   Userspace debugging tools <debugging/userspace_debugging_guide.rst>
> >>     Userspace API <userspace-api/index>
> >>
> >>  See also: the `Linux man pages <https://www.kernel.org/doc/man-pages/>`_,
> >>
> >> --
> >> 2.25.1
> >>
> >

Jonathan Corbet Oct. 24, 2024, 10:20 p.m. UTC | #5

Sebastian Fricke <[e-mail]> writes:

Mostly low-level comments here; the organizational comments I made
before also apply, of course.

> This idea was formed after noticing that new developers experience
> certain difficulty to navigate within the multitude of different
> debugging options in the Kernel and while there often is good
> documentation for the tools, the developer has to know first that they
> exist and where to find them.
> Add a general debugging section to the Kernel documentation, as an
> easily locatable entry point to other documentation and as a general
> guideline for the topic.
>
> Signed-off-by: Sebastian Fricke <[e-mail]>
> ---
>  .../driver_development_debugging_guide.rst         | 193 +++++++++++++++
>  Documentation/debugging/index.rst                  |  66 +++++
>  .../debugging/userspace_debugging_guide.rst        | 269 +++++++++++++++++++++
>  Documentation/index.rst                            |   2 +
>  4 files changed, 530 insertions(+)
>
> diff --git a/Documentation/debugging/driver_development_debugging_guide.rst b/Documentation/debugging/driver_development_debugging_guide.rst
> new file mode 100644
> index 000000000000..c750f63ac1d3
> --- /dev/null
> +++ b/Documentation/debugging/driver_development_debugging_guide.rst
> @@ -0,0 +1,193 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>

I hadn't realized how many people have gone nuts with that file.  I
wouldn't be surprised to learn that it slows the build measurably at
this point, all so that we can say |copy|...  Maybe I'll go through and
replace all that with a simple © someday.

> +========================================
> +Debugging advice for driver development
> +========================================
> +
> +This document serves as a general starting point and lookup for debugging device
> +drivers.
> +While this guide focuses on debugging that requires re-compiling the
> +module/kernel, the `userspace-debugging-guide <userspace_debugging_guide.html>`__

You can refer to another file just by its name; say
Documentation/process/debugging/userspace_debugging_guide.rst and the
right things will happen.

People reading the text files aren't looking for HTML files, so we
really don't want to make internal links that way.

> +will guide you through tools like dynamic debug, ftrace and other tools useful
> +for debugging issues and behavior.
> +For general debugging advice, see `general-debugging-guide <index.html>`__.
> +
> +.. contents::
> +    :depth: 3
> +
> +Available tools
> +===============
> +
> +Printk & friends
> +----------------
> +
> +These are derivatives of printf() with varying destinations and support for being dynamically turned on or off, or lack thereof.
> +
> +.. _printk:

Do you really need this label?  That's a pretty general term to put into
a global namespace.

> +**Simple printk**
> +~~~~~~~~~~~~~~~~~

Why the ** markup?  It's already a section head

> +The classic, can be used to great effect for quick and dirty development
> +of new modules or to extract arbitrary necessary data for troubleshooting.
> +
> +Prerequisite: :code:`CONFIG_PRINTK` (usually enabled by default)

No need to clutter things with :code:; just say `CONFIG_PRINTK` (or even
leave out the literal markup entirely).

> +**Pros**:
> +
> +- No need to learn anything, simple to use
> +- Easy to modify exactly to your needs (formatting of the data (See: `format specifiers <../core-api/printk-formats.html>`__), visibility in the log)
> +- Can cause delays in the execution of the code (beneficial to confirm whether timing is a factor)
> +
> +**Cons**:
> +
> +- Requires rebuilding the kernel/module
> +- Can cause delays in the execution of the code (which can cause issues to be not reproducible)
> +
> +`Full documentation <../core-api/printk-basics.html>`__

Documentation/core-api/printk-basics.rst

> +.. _trace_printk:
> +
> +**Trace_printk**
> +~~~~~~~~~~~~~~~~
> +
> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE` & :code:`#include <linux/ftrace.h>`
> +
> +It is a tiny bit less comfortable to use than `printk`_, because you will have
> +to read the messages from the trace file (See: `Reading the ftrace log
> +<userspace_debugging_guide.html#read-the-ftrace-log>`_ instead of from the
> +kernel log, but very useful when printk adds unwanted delays into the code

Say printk() with parentheses, and the build process will recognize it
and make an automatic link to the documentation; that would be good to
do throughout.

> +execution, causing issues to be flaky or hidden.)
> +
> +If the processing of this still causes timing issues then you can try `trace_puts()`.

...but do it without `literal` markup, let the build system do it.

> +`Full Documentation <../driver-api/basics.html#c.trace_printk>`__
> +
> +**dev_dbg**
> +~~~~~~~~~~~
> +
> +Print statement, which can be target by `dynamic debug
> +<userspace_debugging_guide.html#dynamic-debug>`__, that contains additional
> +information about the device used within the context.
> +
> +**When is it appropriate to leave a debug print in the code?**
> +
> +Permanent debug statements have to be useful for a developer to troubleshoot
> +driver misbehavior. Judging that is a bit more of an art than a science, but
> +some guidelines are in the `Coding style guide
> +<../process/coding-style.html#printing-kernel-messages>`__.
> +
> +**Custom printk**
> +~~~~~~~~~~~~~~~~~
> +
> +Example:
> +::

This can be just "Example::" - good to fix throughout.

> +  #define core_dbg(fmt, arg...) do { \
> +	  if (core_debug) \
> +		  printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \
> +	  } while (0)
> +
> +**When should you do this?**
> +
> +It is better to just use a `pr_debug()`, which can later be turned on/off with
> +dynamic debug. Additionally, a lot of drivers activate these prints via a
> +variable like `core_debug` set by a module parameter. However, Module
> +parameters `are not recommended anymore
> +<https://lkml.org/lkml/2024/3/27/163>`_.

Use lore links, please

> +Ftrace
> +------
> +
> +**Creating custom Ftrace tracepoint**
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Here is a basic description of `how to implement new tracepoints <../trace/tracepoints.html#usage>`__.
> +
> +`Full event tracing documentation <../trace/events.html>`__
> +
> +`Full Ftrace documentation <../trace/ftrace.html>`__
> +
> +DebugFS
> +-------
> +
> +Prerequisite: :code:`CONFIG_DEBUG_FS` & :code:`#include <linux/debugfs.h>`
> +
> +DebugFS differs from the other approaches of debugging, as it doesn't write messages to the kernel log nor add traces to the code. Instead it allows the developer to handle a set of files.
> +With these files you can either store values of variables or make register/memory dumps or you can make these files writable and modify values/settings in the driver.
> +Possible use-cases among others:
> +
> +- Store register values
> +- Keep track of variables
> +- Store errors
> +- Store settings
> +- Toggle a setting like debug on/off
> +- Error injection
> +
> +This is especially useful, when the size of a data dump would be hard to digest as
> +part of the general kernel log (for example when dumping raw bitstream data) or
> +when you are not interested in all the values all the time, but with the
> +possibility to inspect them.
> +
> +The general idea is:
> +
> +- Create a directory during probe (`struct dentry *parent = debugfs_create_dir("my_driver", NULL);`)
> +- Create a file (`debugfs_create_u32("my_value", 444, parent, &my_variable);`)
> +
> +  - In this example the file is found in `/sys/kernel/debug/my_driver/my_value` (with read permissions for user/group/all)
> +  - any update of `my_variable` will update the value in the file
> +
> +- Clean up the folder when removing the device (`debugfs_remove_recursive(parent);`)
> +
> +`Full documentation <../filesystems/debugfs.html>`__
> +
> +.. _error_checking:
> +
> +KASAN, UBSAN, lockdep and other error checkers
> +----------------------------------------------
> +
> +KASAN (Kernel Address Sanitizer)
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +KASAN is a dynamic memory error detector that helps to find use-after-free and
> +out-of-bounds bugs. It uses compile-time instrumentation to check every memory
> +access.
> +
> +`Full documentation <../dev-tools/kasan.html>`__
> +
> +UBSAN (Undefined Behavior Sanitizer)
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +UBSAN relies on compiler instrumentation and runtime checks to detect undefined
> +behavior. It is designed to find a variety of issues, including signed integer overflow,
> +array index out of bounds, and more.
> +
> +`Full documentation <../dev-tools/ubsan.html>`__
> +
> +lockdep (Lock Dependency Validator)
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +lockdep is a runtime lock dependency validator that detects potential deadlocks
> +and other locking-related issues in the kernel.
> +It tracks lock acquisitions and releases, building a dependency graph that is
> +analyzed for potential deadlocks.
> +lockdep is especially useful for validating the correctness of lock ordering in
> +the kernel.
> +
> +device coredump
> +---------------
> +
> +Prerequisite: :code:`#include <linux/devcoredump.h>`
> +
> +Provides infrastructure through which the driver can provide arbitrary data to
> +userland. It is most often used in conjunction with udev or similar userland
> +infrastructure to listen for the kernel uevents, which indicates the dump is
> +ready. Udev then usually has rules to copy that file somewhere for long-term
> +storage and analysis as by default the data for the dump is automatically
> +cleaned up after 5 minutes.
> +That data is then analyzed with driver-specific tools or GDB.
> +
> +You can find an example implementation at: :code:`drivers/media/platform/qcom/venus/core.c`
> +
> +**Copyright** |copy| 2024 : Collabora
> diff --git a/Documentation/debugging/index.rst b/Documentation/debugging/index.rst
> new file mode 100644
> index 000000000000..7bdad2fa09e1
> --- /dev/null
> +++ b/Documentation/debugging/index.rst
> @@ -0,0 +1,66 @@
> +
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +====================================================
> +General debugging advice for Linux Kernel developers
> +====================================================
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   driver_development_debugging_guide
> +   userspace_debugging_guide
> +
> +.. only::  subproject and html
> +
> +   Indices
> +   =======
> +
> +   * :ref:`genindex`
> +
> +General debugging advice
> +========================
> +
> +Depending on the issue, a different set of tools is available to track down the
> +problem or even to realize whether there is one in the first place.
> +
> +As a first step you have to figure out what kind of issue you want to debug.
> +Depending on the answer, your methodology and choice of tools may vary.
> +
> +Do I need to debug with limited access?
> +---------------------------------------
> +
> +Do you have limited access to the machine or are you unable to stop the running execution?
> +
> +In this case your debugging capability depends on built-in debugging support of
> +provided distro kernel.
> +The `userspace debugging guide <userspace_debugging_guide.html>`__ provides a
> +brief overview over range of possible debugging tools in that situation. You
> +can check the capability of your kernel, in most cases, by looking into config
> +file within the /boot folder.
> +
> +Do I have root access to the system?
> +------------------------------------
> +
> +Are you easily able to replace the module in question or to install a new kernel?
> +
> +In that case your range of available tools is a lot bigger, you can find the
> +tools `here <driver_development_debugging_guide.html>`__.
> +
> +Is timing a factor?
> +-------------------
> +
> +It is important to understand if the problem you want to debug manifests itself
> +consistently (i.e. given a set of inputs you always get the same, incorrect
> +output), or inconsistently. If it manifests itself inconsistently, some timing
> +factor might be at play. If inserting delays into the code does change the
> +behavior, then quite likely timing is a factor.
> +
> +When timing does alter the outcome of the code execution using a simple `printk
> +<driver_development_debugging_guide.html#printk>`_ for debugging purposes won't
> +work, a similar alternative is to use `trace_printk
> +<driver_development_debugging_guide.html#trace-printk>`_, which logs the debug
> +messages to the trace file instead of the kernel log.
> +
> +**Copyright** |copy| 2024 : Collabora
> diff --git a/Documentation/debugging/userspace_debugging_guide.rst b/Documentation/debugging/userspace_debugging_guide.rst
> new file mode 100644
> index 000000000000..4d269a9ef913
> --- /dev/null
> +++ b/Documentation/debugging/userspace_debugging_guide.rst
> @@ -0,0 +1,269 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +==========================
> +Userspace debugging advice
> +==========================
> +
> +A brief overview of common tools to debug the Linux Kernel from userspace.
> +For debugging advice aimed at driver developer go `here <driver_development_debugging_guide.html>`__.
> +For general debugging advice, see `general-debugging-guide <index.html>`__.
> +
> +.. contents::
> +    :depth: 3
> +
> +Available tools
> +===============
> +
> +Dynamic debug
> +-------------
> +
> +Mechanism to filter what ends up in the kernel log by dis-/en-abling log
> +messages.
> +
> +Prerequisite: `CONFIG_DYNAMIC_DEBUG`
> +
> +.. _valid_dyndbg_prints:
> +
> +Dynamic debug is only able to target:
> +
> +- `pr_debug()`
> +- `dev_dbg()`
> +- `print_hex_dump_debug()`
> +- `print_hex_dump_bytes()`
> +
> +Therefore the usability of this tool is quite limited in the media subsystem,
> +because, as of now, there is no uniform rule for adding debug prints to the codebase,
> +resulting in a variety of ways these prints are implemented.

This is supposed to be the general user-space debugging guide, so the
"media" reference doesn't quite fit.

> +Also, note that most debug statements are implemented as a variation of
> +`dprintk`, which have to be activated via a parameter in respective module,
> +dynamic debug is unable to do that step for you.
> +
> +Here is one example, that enables all available `pr_debug()`'s within the file:
> +::
> +
> +  $ alias ddcmd='echo $* > /proc/dynamic_debug/control'
> +  $ ddcmd '-p; file v4l2-h264.c +p'
> +  $ grep =p /proc/dynamic_debug/control
> +   drivers/media/v4l2-core/v4l2-h264.c:372 [v4l2_h264]print_ref_list_b =p "ref_pic_list_b%u (cur_poc %u%c) %s"
> +   drivers/media/v4l2-core/v4l2-h264.c:333 [v4l2_h264]print_ref_list_p =p "ref_pic_list_p (cur_poc %u%c) %s\n"
> +
> +**When should you use this over** `Ftrace`_ **?**
> +
> +- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development
> +- When timing is not an issue, meaning if multiple `pr_debug()` statements in the code won't cause delays
> +- When you care more about receiving specific log messages than tracing the pattern of how a function is called
> +
> +`Full documentation <../admin-guide/dynamic-debug-howto.html>`__
> +
> +Ftrace
> +------
> +
> +Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE`
> +
> +Trace whenever the a file is opened:
> +::
> +
> +  $ cd /sys/kernel/tracing
> +  $ echo function > /sys/kernel/tracing/current_tracer
> +  $ echo do_filep_open > set_ftrace_filter
> +  $ echo 1 > tracing_on
> +  $ cat trace
> +	find-4624    [005] ...1. 580781.888166: do_filp_open <-do_sys_openat2
> +	find-4624    [005] ...1. 580781.888237: do_filp_open <-do_sys_openat2
> +	find-4624    [005] ...1. 580781.888361: do_filp_open <-do_sys_openat2
> +
> +.. _event_tracing:

It seems we're kind of duplicating some of the ftrace documentation at
this point?  Duplicate docs have the same problems as duplicate code -
they get out of sync and are best avoided.

Also, *please* resist the temptation to add labels everywhere.

Stopping here; I think this should be enough to get started with.

Thanks for working on this, I think it could turn into useful material
to have.

jon

Patch

diff --git a/Documentation/debugging/driver_development_debugging_guide.rst b/Documentation/debugging/driver_development_debugging_guide.rst
new file mode 100644
index 000000000000..c750f63ac1d3
--- /dev/null
+++ b/Documentation/debugging/driver_development_debugging_guide.rst
@@ -0,0 +1,193 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+========================================
+Debugging advice for driver development
+========================================
+
+This document serves as a general starting point and lookup for debugging device
+drivers.
+While this guide focuses on debugging that requires re-compiling the
+module/kernel, the `userspace-debugging-guide <userspace_debugging_guide.html>`__
+will guide you through tools like dynamic debug, ftrace and other tools useful
+for debugging issues and behavior.
+For general debugging advice, see `general-debugging-guide <index.html>`__.
+
+.. contents::
+    :depth: 3
+
+Available tools
+===============
+
+Printk & friends
+----------------
+
+These are derivatives of printf() with varying destinations and support for being dynamically turned on or off, or lack thereof.
+
+.. _printk:
+
+**Simple printk**
+~~~~~~~~~~~~~~~~~
+
+The classic, can be used to great effect for quick and dirty development
+of new modules or to extract arbitrary necessary data for troubleshooting.
+
+Prerequisite: :code:`CONFIG_PRINTK` (usually enabled by default)
+
+**Pros**:
+
+- No need to learn anything, simple to use
+- Easy to modify exactly to your needs (formatting of the data (See: `format specifiers <../core-api/printk-formats.html>`__), visibility in the log)
+- Can cause delays in the execution of the code (beneficial to confirm whether timing is a factor)
+
+**Cons**:
+
+- Requires rebuilding the kernel/module
+- Can cause delays in the execution of the code (which can cause issues to be not reproducible)
+
+`Full documentation <../core-api/printk-basics.html>`__
+
+.. _trace_printk:
+
+**Trace_printk**
+~~~~~~~~~~~~~~~~
+
+Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE` & :code:`#include <linux/ftrace.h>`
+
+It is a tiny bit less comfortable to use than `printk`_, because you will have
+to read the messages from the trace file (See: `Reading the ftrace log
+<userspace_debugging_guide.html#read-the-ftrace-log>`_ instead of from the
+kernel log, but very useful when printk adds unwanted delays into the code
+execution, causing issues to be flaky or hidden.)
+
+If the processing of this still causes timing issues then you can try `trace_puts()`.
+
+`Full Documentation <../driver-api/basics.html#c.trace_printk>`__
+
+**dev_dbg**
+~~~~~~~~~~~
+
+Print statement, which can be target by `dynamic debug
+<userspace_debugging_guide.html#dynamic-debug>`__, that contains additional
+information about the device used within the context.
+
+**When is it appropriate to leave a debug print in the code?**
+
+Permanent debug statements have to be useful for a developer to troubleshoot
+driver misbehavior. Judging that is a bit more of an art than a science, but
+some guidelines are in the `Coding style guide
+<../process/coding-style.html#printing-kernel-messages>`__.
+
+**Custom printk**
+~~~~~~~~~~~~~~~~~
+
+Example:
+::
+
+  #define core_dbg(fmt, arg...) do { \
+	  if (core_debug) \
+		  printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \
+	  } while (0)
+
+**When should you do this?**
+
+It is better to just use a `pr_debug()`, which can later be turned on/off with
+dynamic debug. Additionally, a lot of drivers activate these prints via a
+variable like `core_debug` set by a module parameter. However, Module
+parameters `are not recommended anymore
+<https://lkml.org/lkml/2024/3/27/163>`_.
+
+Ftrace
+------
+
+**Creating custom Ftrace tracepoint**
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Here is a basic description of `how to implement new tracepoints <../trace/tracepoints.html#usage>`__.
+
+`Full event tracing documentation <../trace/events.html>`__
+
+`Full Ftrace documentation <../trace/ftrace.html>`__
+
+DebugFS
+-------
+
+Prerequisite: :code:`CONFIG_DEBUG_FS` & :code:`#include <linux/debugfs.h>`
+
+DebugFS differs from the other approaches of debugging, as it doesn't write messages to the kernel log nor add traces to the code. Instead it allows the developer to handle a set of files.
+With these files you can either store values of variables or make register/memory dumps or you can make these files writable and modify values/settings in the driver.
+Possible use-cases among others:
+
+- Store register values
+- Keep track of variables
+- Store errors
+- Store settings
+- Toggle a setting like debug on/off
+- Error injection
+
+This is especially useful, when the size of a data dump would be hard to digest as
+part of the general kernel log (for example when dumping raw bitstream data) or
+when you are not interested in all the values all the time, but with the
+possibility to inspect them.
+
+The general idea is:
+
+- Create a directory during probe (`struct dentry *parent = debugfs_create_dir("my_driver", NULL);`)
+- Create a file (`debugfs_create_u32("my_value", 444, parent, &my_variable);`)
+
+  - In this example the file is found in `/sys/kernel/debug/my_driver/my_value` (with read permissions for user/group/all)
+  - any update of `my_variable` will update the value in the file
+
+- Clean up the folder when removing the device (`debugfs_remove_recursive(parent);`)
+
+`Full documentation <../filesystems/debugfs.html>`__
+
+.. _error_checking:
+
+KASAN, UBSAN, lockdep and other error checkers
+----------------------------------------------
+
+KASAN (Kernel Address Sanitizer)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+KASAN is a dynamic memory error detector that helps to find use-after-free and
+out-of-bounds bugs. It uses compile-time instrumentation to check every memory
+access.
+
+`Full documentation <../dev-tools/kasan.html>`__
+
+UBSAN (Undefined Behavior Sanitizer)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+UBSAN relies on compiler instrumentation and runtime checks to detect undefined
+behavior. It is designed to find a variety of issues, including signed integer overflow,
+array index out of bounds, and more.
+
+`Full documentation <../dev-tools/ubsan.html>`__
+
+lockdep (Lock Dependency Validator)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+lockdep is a runtime lock dependency validator that detects potential deadlocks
+and other locking-related issues in the kernel.
+It tracks lock acquisitions and releases, building a dependency graph that is
+analyzed for potential deadlocks.
+lockdep is especially useful for validating the correctness of lock ordering in
+the kernel.
+
+device coredump
+---------------
+
+Prerequisite: :code:`#include <linux/devcoredump.h>`
+
+Provides infrastructure through which the driver can provide arbitrary data to
+userland. It is most often used in conjunction with udev or similar userland
+infrastructure to listen for the kernel uevents, which indicates the dump is
+ready. Udev then usually has rules to copy that file somewhere for long-term
+storage and analysis as by default the data for the dump is automatically
+cleaned up after 5 minutes.
+That data is then analyzed with driver-specific tools or GDB.
+
+You can find an example implementation at: :code:`drivers/media/platform/qcom/venus/core.c`
+
+**Copyright** |copy| 2024 : Collabora
diff --git a/Documentation/debugging/index.rst b/Documentation/debugging/index.rst
new file mode 100644
index 000000000000..7bdad2fa09e1
--- /dev/null
+++ b/Documentation/debugging/index.rst
@@ -0,0 +1,66 @@ 
+
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+====================================================
+General debugging advice for Linux Kernel developers
+====================================================
+
+.. toctree::
+   :maxdepth: 1
+
+   driver_development_debugging_guide
+   userspace_debugging_guide
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
+
+General debugging advice
+========================
+
+Depending on the issue, a different set of tools is available to track down the
+problem or even to realize whether there is one in the first place.
+
+As a first step you have to figure out what kind of issue you want to debug.
+Depending on the answer, your methodology and choice of tools may vary.
+
+Do I need to debug with limited access?
+---------------------------------------
+
+Do you have limited access to the machine or are you unable to stop the running execution?
+
+In this case your debugging capability depends on built-in debugging support of
+provided distro kernel.
+The `userspace debugging guide <userspace_debugging_guide.html>`__ provides a
+brief overview over range of possible debugging tools in that situation. You
+can check the capability of your kernel, in most cases, by looking into config
+file within the /boot folder.
+
+Do I have root access to the system?
+------------------------------------
+
+Are you easily able to replace the module in question or to install a new kernel?
+
+In that case your range of available tools is a lot bigger, you can find the
+tools `here <driver_development_debugging_guide.html>`__.
+
+Is timing a factor?
+-------------------
+
+It is important to understand if the problem you want to debug manifests itself
+consistently (i.e. given a set of inputs you always get the same, incorrect
+output), or inconsistently. If it manifests itself inconsistently, some timing
+factor might be at play. If inserting delays into the code does change the
+behavior, then quite likely timing is a factor.
+
+When timing does alter the outcome of the code execution using a simple `printk
+<driver_development_debugging_guide.html#printk>`_ for debugging purposes won't
+work, a similar alternative is to use `trace_printk
+<driver_development_debugging_guide.html#trace-printk>`_, which logs the debug
+messages to the trace file instead of the kernel log.
+
+**Copyright** |copy| 2024 : Collabora
diff --git a/Documentation/debugging/userspace_debugging_guide.rst b/Documentation/debugging/userspace_debugging_guide.rst
new file mode 100644
index 000000000000..4d269a9ef913
--- /dev/null
+++ b/Documentation/debugging/userspace_debugging_guide.rst
@@ -0,0 +1,269 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==========================
+Userspace debugging advice
+==========================
+
+A brief overview of common tools to debug the Linux Kernel from userspace.
+For debugging advice aimed at driver developer go `here <driver_development_debugging_guide.html>`__.
+For general debugging advice, see `general-debugging-guide <index.html>`__.
+
+.. contents::
+    :depth: 3
+
+Available tools
+===============
+
+Dynamic debug
+-------------
+
+Mechanism to filter what ends up in the kernel log by dis-/en-abling log
+messages.
+
+Prerequisite: `CONFIG_DYNAMIC_DEBUG`
+
+.. _valid_dyndbg_prints:
+
+Dynamic debug is only able to target:
+
+- `pr_debug()`
+- `dev_dbg()`
+- `print_hex_dump_debug()`
+- `print_hex_dump_bytes()`
+
+Therefore the usability of this tool is quite limited in the media subsystem,
+because, as of now, there is no uniform rule for adding debug prints to the codebase,
+resulting in a variety of ways these prints are implemented.
+
+Also, note that most debug statements are implemented as a variation of
+`dprintk`, which have to be activated via a parameter in respective module,
+dynamic debug is unable to do that step for you.
+
+Here is one example, that enables all available `pr_debug()`'s within the file:
+::
+
+  $ alias ddcmd='echo $* > /proc/dynamic_debug/control'
+  $ ddcmd '-p; file v4l2-h264.c +p'
+  $ grep =p /proc/dynamic_debug/control
+   drivers/media/v4l2-core/v4l2-h264.c:372 [v4l2_h264]print_ref_list_b =p "ref_pic_list_b%u (cur_poc %u%c) %s"
+   drivers/media/v4l2-core/v4l2-h264.c:333 [v4l2_h264]print_ref_list_p =p "ref_pic_list_p (cur_poc %u%c) %s\n"
+
+**When should you use this over** `Ftrace`_ **?**
+
+- When the code contains one of the :ref:`valid print statements <valid_dyndbg_prints_>`_ or when you have added multiple pr_debug() statements during development
+- When timing is not an issue, meaning if multiple `pr_debug()` statements in the code won't cause delays
+- When you care more about receiving specific log messages than tracing the pattern of how a function is called
+
+`Full documentation <../admin-guide/dynamic-debug-howto.html>`__
+
+Ftrace
+------
+
+Prerequisite: :code:`CONFIG_DYNAMIC_FTRACE`
+
+Trace whenever the a file is opened:
+::
+
+  $ cd /sys/kernel/tracing
+  $ echo function > /sys/kernel/tracing/current_tracer
+  $ echo do_filep_open > set_ftrace_filter
+  $ echo 1 > tracing_on
+  $ cat trace
+	find-4624    [005] ...1. 580781.888166: do_filp_open <-do_sys_openat2
+	find-4624    [005] ...1. 580781.888237: do_filp_open <-do_sys_openat2
+	find-4624    [005] ...1. 580781.888361: do_filp_open <-do_sys_openat2
+
+.. _event_tracing:
+
+Activate a ftrace event on top of that:
+::
+
+  $ echo 1 > events/kmem/kfree/enable
+	find-5351    [005] ...1. 678288.910143: do_filp_open <-do_sys_openat2
+	find-5351    [005] ..... 678288.910185: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
+	find-5351    [005] ...1. 678288.910218: do_filp_open <-do_sys_openat2
+	find-5351    [005] ..... 678288.910260: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
+	find-5351    [005] ...1. 678288.910293: do_filp_open <-do_sys_openat2
+	find-5351    [005] ..... 678288.910345: kfree: call_site=fscrypt_fname_free_buffer+0x28/0x48 ptr=0000000000000000
+	find-5351    [005] ..... 678288.910389: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000007ba73e40
+	find-5351    [005] ..... 678288.910390: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000009e4850bc
+	find-5351    [005] ..... 678288.910391: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=000000004156f20f
+	find-5351    [005] ..... 678288.910393: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=00000000c7207e20
+	find-5351    [005] ..... 678288.910394: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000037c31d76
+	find-5351    [005] ..... 678288.910395: kfree: call_site=free_rb_tree_fname+0x54/0x88 ptr=0000000001922677
+
+.. _read_ftrace_log:
+
+**Reading the ftrace log**
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The `trace` file can be read just like any other file (`cat`, `tail`, `head`,
+`vim`, etc.), the size of the file is limited by the `buffer_size_kb` (``echo
+1000 > buffer_size_kb``). The `trace_pipe` will behave similar to the `trace`
+file, but whenever you read from the file the content is consumed.
+
+**Kernelshark**
+~~~~~~~~~~~~~~~
+
+A GUI interface to visualize the traces as a graph and list view from the
+output of the `trace-cmd
+<https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/>`__ application.
+
+`Kernelshark documentation <https://kernelshark.org/Documentation.html>`_
+
+`Full Ftrace documentation <../trace/ftrace.html>`__
+
+Perf & alternatives
+-------------------
+
+The tools mentioned above provide ways to inspect kernel code, results, variable values, etc.
+Sometimes you have to find out first where to look and for those cases a box of performance tracking tools can help you to frame the issue.
+
+.. _performance:
+
+**Why should you do a performance analysis?**
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A performance analysis is a good first step when among other reasons:
+
+- you cannot define the issue
+- you do not know where it occurs
+- the running system should not be interrupted or it is a remote system, where you cannot install a new module/kernel
+
+.. _linux-tools:
+
+**How to do a simple analysis with linux tools?**
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For the start of a performance analysis, you can start with the usual tools like:
+
+- `top` / `htop` / `atop` (*get an overview of the system load, see spikes on specific processes*)
+- `mpstat -P ALL` (*look at the load distribution among CPUs*)
+- `iostat -x` (*observe input and output devices utilization and performance*)
+- `vmstat` (*overview of memory usage on the system*)
+- `pidstat` (*similar to* `vmstat` *but per process, to dial it down to the target*)
+- `strace -tp $PID` (*once you know the process, you can figure out how it communicates with the Kernel*)
+
+These should help to figure out restrict the areas to look at sufficiently.
+
+**Diving deeper with perf**
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The **perf** tool provides a series of metrics and events to further dial down on issues.
+
+Prerequisite: build or install perf on your system
+
+Gather statistics data for finding all files starting with `gcc` in `/usr`
+::
+
+	# perf stat -d find /usr -name 'gcc*' | wc -l
+
+	 Performance counter stats for 'find /usr -name gcc*':
+
+		   1277.81 msec task-clock                       #    0.997 CPUs utilized             
+			 9      context-switches                 #    7.043 /sec                      
+			 1      cpu-migrations                   #    0.783 /sec                      
+		       704      page-faults                      #  550.943 /sec                      
+		 766548897      cycles                           #    0.600 GHz                         (97.15%)
+		 798285467      instructions                     #    1.04  insn per cycle              (97.15%)
+		  57582731      branches                         #   45.064 M/sec                       (2.85%)
+		   3842573      branch-misses                    #    6.67% of all branches             (97.15%)
+		 281616097      L1-dcache-loads                  #  220.390 M/sec                       (97.15%)
+		   4220975      L1-dcache-load-misses            #    1.50% of all L1-dcache accesses   (97.15%)
+	   <not supported>      LLC-loads                                                             
+	   <not supported>      LLC-load-misses                                                       
+
+	       1.281746009 seconds time elapsed
+
+	       0.508796000 seconds user
+	       0.773209000 seconds sys
+
+
+	52
+
+The availability of events and metrics depends on the system you are running.
+
+`Full documentation <https://perf.wiki.kernel.org/index.php/Main_Page>`__
+
+**Perfetto**
+~~~~~~~~~~~~
+
+A set of tools to measure and analyze how well applications and systems perform.
+You can use it to:
+
+* identify bottlenecks
+* optimize code
+* make software run faster and more efficiently.
+
+**What is the difference between perfetto and perf?**
+
+* perf is tool as part of and specialized for the Linux Kernel and has CLI user
+  interface.
+* perfetto cross-platform performance analysis stack, has extended
+  functionality into userspace and provides a WEB user interface.
+
+`Full documentation <https://perfetto.dev/docs/>`__
+
+.. _kernel_panic_analysis_tools:
+
+Kernel panic analysis tools
+---------------------------
+
+  To analyse the crash dump please use `Kdump` & `Kexec`.
+
+  `Full documentation <../admin-guide/kdump/kdump.html>`__
+
+  In order to find the corresponding line in the code you can use `faddr2line
+  <https://elixir.bootlin.com/linux/latest/source/scripts/faddr2line>`__, note
+  that you need to enable `CONFIG_DEBUG_INFO` for that to work.
+
+  An alternative to using `faddr2line` is the use of `objdump` (and it's
+  derivatives for the different platforms like `aarch64-linux-gnu-objdump`),
+  take this line as an example:
+
+  `[  +0.000240]  rkvdec_device_run+0x50/0x138 [rockchip_vdec]`.
+
+  We can find the corresponding line of code by executing:
+  ::
+
+    aarch64-linux-gnu-objdump -dS drivers/staging/media/rkvdec/rockchip-vdec.ko | grep rkvdec_device_run\>: -A 40
+    0000000000000ac8 <rkvdec_device_run>:
+     ac8:	d503201f 	nop
+     acc:	d503201f 	nop
+    {
+     ad0:	d503233f 	paciasp
+     ad4:	a9bd7bfd 	stp	x29, x30, [sp, #-48]!
+     ad8:	910003fd 	mov	x29, sp
+     adc:	a90153f3 	stp	x19, x20, [sp, #16]
+     ae0:	a9025bf5 	stp	x21, x22, [sp, #32]
+        const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
+     ae4:	f9411814 	ldr	x20, [x0, #560]
+        struct rkvdec_dev *rkvdec = ctx->dev;
+     ae8:	f9418015 	ldr	x21, [x0, #768]
+        if (WARN_ON(!desc))
+     aec:	b4000654 	cbz	x20, bb4 <rkvdec_device_run+0xec>
+        ret = pm_runtime_resume_and_get(rkvdec->dev);
+     af0:	f943d2b6 	ldr	x22, [x21, #1952]
+        ret = __pm_runtime_resume(dev, RPM_GET_PUT);
+     af4:	aa0003f3 	mov	x19, x0
+     af8:	52800081 	mov	w1, #0x4                   	// #4
+     afc:	aa1603e0 	mov	x0, x22
+     b00:	94000000 	bl	0 <__pm_runtime_resume>
+        if (ret < 0) {
+     b04:	37f80340 	tbnz	w0, #31, b6c <rkvdec_device_run+0xa4>
+        dev_warn(rkvdec->dev, "Not good\n");
+     b08:	f943d2a0 	ldr	x0, [x21, #1952]
+     b0c:	90000001 	adrp	x1, 0 <rkvdec_try_ctrl-0x8>
+     b10:	91000021 	add	x1, x1, #0x0
+     b14:	94000000 	bl	0 <_dev_warn>
+        *bad = 1;
+     b18:	d2800001 	mov	x1, #0x0                   	// #0
+     ...
+
+
+  To find the matching line we just have to add `0x50` (from
+  `rkvdec_device_run+0x50`) to `0xac8` (from `0000000000000ac8
+  <rkvdec_device_run>:`), which yields `0xb18` corresponding with `*bad = 1`.
+
+**Copyright** |copy| 2024 : Collabora
diff --git a/Documentation/index.rst b/Documentation/index.rst
index f9f525f4c0dd..eb8de7ba8e41 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -57,6 +57,7 @@  Various other manuals with useful information for all kernel developers.
    Testing guide <dev-tools/testing-overview>
    Hacking guide <kernel-hacking/index>
    Tracing <trace/index>
+   Debugging <debugging/index>
    Fault injection <fault-injection/index>
    Livepatching <livepatch/index>
    Rust <rust/index>
@@ -76,6 +77,7 @@  developers seeking information on the kernel's user-space APIs.
    Build system <kbuild/index>
    Reporting issues <admin-guide/reporting-issues.rst>
    Userspace tools <tools/index>
+   Userspace debugging tools <debugging/userspace_debugging_guide.rst>
    Userspace API <userspace-api/index>
 
 See also: the `Linux man pages <https://www.kernel.org/doc/man-pages/>`_,