| Message ID | 20240901040658.157425-14-swboyd@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | platform/chrome: Add DT USB/DP muxing/topology support | expand |
On Sat, Aug 31, 2024 at 09:06:51PM GMT, Stephen Boyd wrote: > Extend the usb-switch binding to support DisplayPort (DP) alternate > modes. A third port for the DP signal is necessary when a mode-switch is > muxing USB and DP together onto a usb type-c connector. Add data-lanes > to the usbc output node to allow a device using this binding to remap > the data lanes on the output. Add an example to show how this new port > can be used. > > Reviewed-by: Rob Herring (Arm) <robh@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Conor Dooley <conor+dt@kernel.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Prashant Malani <pmalani@chromium.org> > Cc: Tzung-Bi Shih <tzungbi@kernel.org> > Cc: <devicetree@vger.kernel.org> > Cc: <chrome-platform@lists.linux.dev> > Cc: Pin-yen Lin <treapking@chromium.org> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> > --- > .../devicetree/bindings/usb/usb-switch.yaml | 89 +++++++++++++++++++ > 1 file changed, 89 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml > index f5dc7e23b134..816f295f322f 100644 > --- a/Documentation/devicetree/bindings/usb/usb-switch.yaml > +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml > @@ -52,6 +52,14 @@ properties: > endpoint: > $ref: '#/$defs/usbc-in-endpoint' > > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + > + properties: > + endpoint: > + $ref: '#/$defs/dp-endpoint' Is it a separate port or is it an endpoint of the same upstream-facing (non-connector-facing) SS port? > + > oneOf: > - required: > - port > @@ -65,6 +73,19 @@ $defs: > $ref: /schemas/graph.yaml#/$defs/endpoint-base > description: Super Speed (SS) output endpoint to a type-c connector > unevaluatedProperties: false > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + An array of physical USB Type-C data lane indexes. > + - 0 is SSRX1 lane > + - 1 is SSTX1 lane > + - 2 is SSTX2 lane > + - 3 is SSRX2 lane > + minItems: 4 > + maxItems: 4 > + items: > + maximum: 3 What is the usecase to delare less than 4 lanes going to the USB-C connector? > > usbc-in-endpoint: > $ref: /schemas/graph.yaml#/$defs/endpoint-base > @@ -79,7 +100,75 @@ $defs: > items: > maximum: 8 > > + dp-endpoint: > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + description: DisplayPort (DP) input from the DP PHY > + unevaluatedProperties: false > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + An array of physical DP data lane indexes > + - 0 is DP ML0 lane > + - 1 is DP ML1 lane > + - 2 is DP ML2 lane > + - 3 is DP ML3 lane > + oneOf: > + - items: > + - const: 0 > + - const: 1 > + - items: > + - const: 0 > + - const: 1 > + - const: 2 > + - const: 3 > + > examples: > + # A USB + DP mode and orientation switch which muxes DP altmode > + # and USB onto a usb-c-connector node. > + - | > + device { > + mode-switch; > + orientation-switch; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + endpoint { > + remote-endpoint = <&usb_c_connector>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + endpoint { > + remote-endpoint = <&usb_ss_phy>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + endpoint { > + remote-endpoint = <&dp_phy>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + }; > + > # A USB orientation switch which flips the pin orientation > # for a usb-c-connector node. > - | > -- > https://chromeos.dev >
Quoting Dmitry Baryshkov (2024-09-19 03:40:19) > On Sat, Aug 31, 2024 at 09:06:51PM GMT, Stephen Boyd wrote: > > diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml > > index f5dc7e23b134..816f295f322f 100644 > > --- a/Documentation/devicetree/bindings/usb/usb-switch.yaml > > +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml > > @@ -52,6 +52,14 @@ properties: > > endpoint: > > $ref: '#/$defs/usbc-in-endpoint' > > > > + port@2: > > + $ref: /schemas/graph.yaml#/$defs/port-base > > + unevaluatedProperties: false > > + > > + properties: > > + endpoint: > > + $ref: '#/$defs/dp-endpoint' > > Is it a separate port or is it an endpoint of the same upstream-facing > (non-connector-facing) SS port? I don't quite follow this comment. This is an input DP endpoint/port. > > > + > > oneOf: > > - required: > > - port > > @@ -65,6 +73,19 @@ $defs: > > $ref: /schemas/graph.yaml#/$defs/endpoint-base > > description: Super Speed (SS) output endpoint to a type-c connector > > unevaluatedProperties: false > > + properties: > > + data-lanes: > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > + description: | > > + An array of physical USB Type-C data lane indexes. > > + - 0 is SSRX1 lane > > + - 1 is SSTX1 lane > > + - 2 is SSTX2 lane > > + - 3 is SSRX2 lane > > + minItems: 4 > > + maxItems: 4 > > + items: > > + maximum: 3 > > What is the usecase to delare less than 4 lanes going to the USB-C > connector? I'm not aware of any usecase. The 'maximum: 3' is the max value in the cell, i.e. 0, 1, 2, or 3.
On Thu, Oct 10, 2024 at 06:43:35PM -0400, Stephen Boyd wrote: > Quoting Dmitry Baryshkov (2024-09-19 03:40:19) > > On Sat, Aug 31, 2024 at 09:06:51PM GMT, Stephen Boyd wrote: > > > diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml > > > index f5dc7e23b134..816f295f322f 100644 > > > --- a/Documentation/devicetree/bindings/usb/usb-switch.yaml > > > +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml > > > @@ -52,6 +52,14 @@ properties: > > > endpoint: > > > $ref: '#/$defs/usbc-in-endpoint' > > > > > > + port@2: > > > + $ref: /schemas/graph.yaml#/$defs/port-base > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + endpoint: > > > + $ref: '#/$defs/dp-endpoint' > > > > Is it a separate port or is it an endpoint of the same upstream-facing > > (non-connector-facing) SS port? > > I don't quite follow this comment. This is an input DP endpoint/port. This is the question: is this a separate port or just an endpoint on the port? > > > > > > + > > > oneOf: > > > - required: > > > - port > > > @@ -65,6 +73,19 @@ $defs: > > > $ref: /schemas/graph.yaml#/$defs/endpoint-base > > > description: Super Speed (SS) output endpoint to a type-c connector > > > unevaluatedProperties: false > > > + properties: > > > + data-lanes: > > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > > + description: | > > > + An array of physical USB Type-C data lane indexes. > > > + - 0 is SSRX1 lane > > > + - 1 is SSTX1 lane > > > + - 2 is SSTX2 lane > > > + - 3 is SSRX2 lane > > > + minItems: 4 > > > + maxItems: 4 > > > + items: > > > + maximum: 3 > > > > What is the usecase to delare less than 4 lanes going to the USB-C > > connector? > > I'm not aware of any usecase. The 'maximum: 3' is the max value in the > cell, i.e. 0, 1, 2, or 3.
diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml index f5dc7e23b134..816f295f322f 100644 --- a/Documentation/devicetree/bindings/usb/usb-switch.yaml +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -52,6 +52,14 @@ properties: endpoint: $ref: '#/$defs/usbc-in-endpoint' + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: '#/$defs/dp-endpoint' + oneOf: - required: - port @@ -65,6 +73,19 @@ $defs: $ref: /schemas/graph.yaml#/$defs/endpoint-base description: Super Speed (SS) output endpoint to a type-c connector unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical USB Type-C data lane indexes. + - 0 is SSRX1 lane + - 1 is SSTX1 lane + - 2 is SSTX2 lane + - 3 is SSRX2 lane + minItems: 4 + maxItems: 4 + items: + maximum: 3 usbc-in-endpoint: $ref: /schemas/graph.yaml#/$defs/endpoint-base @@ -79,7 +100,75 @@ $defs: items: maximum: 8 + dp-endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + description: DisplayPort (DP) input from the DP PHY + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical DP data lane indexes + - 0 is DP ML0 lane + - 1 is DP ML1 lane + - 2 is DP ML2 lane + - 3 is DP ML3 lane + oneOf: + - items: + - const: 0 + - const: 1 + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + examples: + # A USB + DP mode and orientation switch which muxes DP altmode + # and USB onto a usb-c-connector node. + - | + device { + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint { + remote-endpoint = <&usb_c_connector>; + data-lanes = <0 1 2 3>; + }; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint { + remote-endpoint = <&usb_ss_phy>; + }; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint { + remote-endpoint = <&dp_phy>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + # A USB orientation switch which flips the pin orientation # for a usb-c-connector node. - |