diff mbox series

[RFC,1/2] dt-bindings: mtd: Add bindings for describing concatinated MTD devices

Message ID 20241026075347.580858-2-amit.kumar-mahapatra@amd.com (mailing list archive)
State New
Headers show
Series Add support for stacked and parallel memories | expand

Commit Message

Amit Kumar Mahapatra Oct. 26, 2024, 7:53 a.m. UTC
This approach was suggested by Rob [1] during a discussion on Miquel's
initial approach [2] to extend the MTD-CONCAT driver to support stacked
memories.
Define each flash node separately with its respective partitions, and add
a 'concat-parts' binding to link the partitions of the two flash nodes that
need to be concatenated.

flash@0 {
        compatible = "jedec,spi-nor"
        ...
                partitions {
                compatible = "fixed-partitions";
                        concat-partition = <&flash0_partition &flash1_partition>;
                        flash0_partition: partition@0 {
                                label = "part0_0";
                                reg = <0x0 0x800000>;
                        }
                }
}
flash@1 {
        compatible = "jedec,spi-nor"
        ...
                partitions {
                compatible = "fixed-partitions";
                        concat-partition = <&flash0_partition &flash1_partition>;
                        flash1_partition: partition@0 {
                                label = "part0_1";
                                reg = <0x0 0x800000>;
                        }
                }
}

Based on the bindings the MTD-CONCAT driver need to be updated to create
virtual mtd-concat devices.

[1] https://lore.kernel.org/all/20191118221341.GA30937@bogus/
[2] https://lore.kernel.org/all/20191113171505.26128-4-miquel.raynal@bootlin.com/

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
---
 .../mtd/partitions/fixed-partitions.yaml       | 18 ++++++++++++++++++
 .../bindings/mtd/partitions/partitions.yaml    |  6 ++++++
 2 files changed, 24 insertions(+)

Comments

Krzysztof Kozlowski Oct. 26, 2024, 11:13 a.m. UTC | #1
On 26/10/2024 09:53, Amit Kumar Mahapatra wrote:
> This approach was suggested by Rob [1] during a discussion on Miquel's
> initial approach [2] to extend the MTD-CONCAT driver to support stacked
> memories.
> Define each flash node separately with its respective partitions, and add
> a 'concat-parts' binding to link the partitions of the two flash nodes that
> need to be concatenated.

I understand this was not sent to proper addresses for review because it
is a RFC. It's fine then.

If this was not the intention and this should be reviewed (and tested,
although I assume you tested these patches first), then please read the
standard form bellow:

<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of
people, so fix your workflow. Tools might also fail if you work on some
ancient tree (don't, instead use mainline) or work on fork of kernel
(don't, instead use mainline). Just use b4 and everything should be
fine, although remember about `b4 prep --auto-to-cc` if you added new
patches to the patchset.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time.

Please kindly resend and include all necessary To/Cc entries.
</form letter>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index 058253d6d889..df4ccb3dfeba 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -183,3 +183,21 @@  examples:
             read-only;
         };
     };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        concat-parts = <&part0 &part1>;
+
+        part0: partition@0 {
+            label = "flash0-part0";
+            reg = <0x0000000 0x100000>;
+        };
+
+        part1: partition@100000 {
+            label = "flash1-part0";
+            reg = <0x0100000 0x200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
index 1dda2c80747b..86bbd83c3f6d 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
@@ -32,6 +32,12 @@  properties:
   '#size-cells':
     enum: [1, 2]
 
+  concat-parts:
+    description: List of MTD partitions phandles that should be concatenated.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    maxItems: 4
+
 patternProperties:
   "^partition(-.+|@[0-9a-f]+)$":
     $ref: partition.yaml