| Message ID | 20241029-spi-nor-v2-1-e166c3900e19@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] mtd: spi-nor: atmel: add at25sf321 entry | expand |
On 10/29/24 11:23 AM, Marcus Folkesson wrote: > Add entry for the at25sf321 32Mbit SPI flash. > > This flash is populated on a custom board and was tested at > 10MHz frequency using the "ti,da830-spi" SPI controller. > no sfdp for this one? > Link: > https://www.renesas.com/en/document/dst/at25sf321-datasheet?r=1608801 > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > --- > root# cat /sys/class/spi_master/spi1/spi1.1/spi-nor/partname > at25sf321 > > root# cat /sys/class/spi_master/spi1/spi1.1/spi-nor/jedec_id > 1f8701 > > root# cat /sys/class/spi_master/spi1/spi1.1/spi-nor/manufacturer > atmel > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp? or hexdump -Cv if you prefer > root# cat /sys/kernel/debug/spi-nor/spi1.1/capabilities > Supported read modes by the flash > 1S-1S-1S > opcode 0x03 > mode cycles 0 > dummy cycles 0 > 1S-1S-1S (fast read) > opcode 0x0b > mode cycles 0 > dummy cycles 8 > > Supported page program modes by the flash > 1S-1S-1S > opcode 0x0 > > root# cat /sys/kernel/debug/spi-nor/spi1.1/params > name at25sf321 > id 1f 87 01 > size 4.00 MiB > write size 1 > page size 256 > address nbytes 3 > flags HAS_16BIT_SR > > opcodes > read 0x0b > dummy cycles 8 > erase 0x20 > program 0x02 > 8D extension none > > protocols > read 1S-1S-1S > write 1S-1S-1S > register 1S-1S-1S > > erase commands > 20 (4.00 KiB) [0] > d8 (64.0 KiB) [1] > c7 (4.00 MiB) > > sector map > region (in hex) | erase mask | flags > ------------------+------------+---------- > 00000000-003fffff | [01 ] | > --- > Changes in v2: > - Change from at25sf321b to at25sf321 > - Link to v1: https://lore.kernel.org/r/20241018-spi-nor-v1-1-d725bfb701ec@gmail.com > --- > drivers/mtd/spi-nor/atmel.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c > index 45d1153a04a07b7c61f46b117311b24ab695038f..8285a16b253d54ae8c4a5302850244d2248aa755 100644 > --- a/drivers/mtd/spi-nor/atmel.c > +++ b/drivers/mtd/spi-nor/atmel.c > @@ -238,6 +238,11 @@ static const struct flash_info atmel_nor_parts[] = { > .flags = SPI_NOR_HAS_LOCK, > .no_sfdp_flags = SECT_4K, > .fixups = &at25fs_nor_fixups > + }, { > + .id = SNOR_ID(0x1f, 0x87, 0x01), > + .name = "at25sf321", > + .size = SZ_4M, > + .no_sfdp_flags = SECT_4K, it seems this flash supports dual and quad reads. Do you care to add/test these modes? you'll need mtd-utils > }, > }; > > > --- > base-commit: 200289db261f0c8131a5756133e9d30966289c3b > change-id: 20241018-spi-nor-dc29698dea0f > > Best regards,
Hi Tudor, On Tue, Oct 29, 2024 at 11:36:17AM +0000, Tudor Ambarus wrote: > > > On 10/29/24 11:23 AM, Marcus Folkesson wrote: > > Add entry for the at25sf321 32Mbit SPI flash. > > > > This flash is populated on a custom board and was tested at > > 10MHz frequency using the "ti,da830-spi" SPI controller. > > > > no sfdp for this one? No SFDP for this one! > > > Link: > > https://www.renesas.com/en/document/dst/at25sf321-datasheet?r=1608801 > > > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > --- [...] > > diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c > > index 45d1153a04a07b7c61f46b117311b24ab695038f..8285a16b253d54ae8c4a5302850244d2248aa755 100644 > > --- a/drivers/mtd/spi-nor/atmel.c > > +++ b/drivers/mtd/spi-nor/atmel.c > > @@ -238,6 +238,11 @@ static const struct flash_info atmel_nor_parts[] = { > > .flags = SPI_NOR_HAS_LOCK, > > .no_sfdp_flags = SECT_4K, > > .fixups = &at25fs_nor_fixups > > + }, { > > + .id = SNOR_ID(0x1f, 0x87, 0x01), > > + .name = "at25sf321", > > + .size = SZ_4M, > > + .no_sfdp_flags = SECT_4K, > > it seems this flash supports dual and quad reads. Do you care to > add/test these modes? > > you'll need mtd-utils Sure, not sure how I test it though. I've added mtd-utils but I do not see any good parameters to set mode? > > > }, > > }; > > > > > > --- > > base-commit: 200289db261f0c8131a5756133e9d30966289c3b > > change-id: 20241018-spi-nor-dc29698dea0f > > > > Best regards, Best regards, Marcus Folkesson
On 10/29/24 1:16 PM, Marcus Folkesson wrote: > Hi Tudor, > Hi! > On Tue, Oct 29, 2024 at 11:36:17AM +0000, Tudor Ambarus wrote: >> >> >> On 10/29/24 11:23 AM, Marcus Folkesson wrote: >>> Add entry for the at25sf321 32Mbit SPI flash. >>> >>> This flash is populated on a custom board and was tested at >>> 10MHz frequency using the "ti,da830-spi" SPI controller. >>> >> >> no sfdp for this one? > > No SFDP for this one! >> >>> Link: >>> https://www.renesas.com/en/document/dst/at25sf321-datasheet?r=1608801 >>> >>> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> >>> --- > > [...] > >>> diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c >>> index 45d1153a04a07b7c61f46b117311b24ab695038f..8285a16b253d54ae8c4a5302850244d2248aa755 100644 >>> --- a/drivers/mtd/spi-nor/atmel.c >>> +++ b/drivers/mtd/spi-nor/atmel.c >>> @@ -238,6 +238,11 @@ static const struct flash_info atmel_nor_parts[] = { >>> .flags = SPI_NOR_HAS_LOCK, >>> .no_sfdp_flags = SECT_4K, >>> .fixups = &at25fs_nor_fixups >>> + }, { >>> + .id = SNOR_ID(0x1f, 0x87, 0x01), >>> + .name = "at25sf321", >>> + .size = SZ_4M, >>> + .no_sfdp_flags = SECT_4K, >> >> it seems this flash supports dual and quad reads. Do you care to >> add/test these modes? >> >> you'll need mtd-utils > > Sure, not sure how I test it though. > I've added mtd-utils but I do not see any good parameters to set mode? Ah, you can't specify the width at runtime. In SPI NOR you need to update your flash entry to contain: .no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ, then in your device tree you can set dual mode by doing spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; For quad you set the tx/rx widths to 4. Do a cat /sys/kernel/debug/spi-nor/spi0.0/params to see what params get set. You need to do the tests from https://docs.kernel.org/driver-api/mtd/spi-nor.html, starting with section "3 Dump debugfs data", for each of the dual/quad modes. Cheers, ta
diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c index 45d1153a04a07b7c61f46b117311b24ab695038f..8285a16b253d54ae8c4a5302850244d2248aa755 100644 --- a/drivers/mtd/spi-nor/atmel.c +++ b/drivers/mtd/spi-nor/atmel.c @@ -238,6 +238,11 @@ static const struct flash_info atmel_nor_parts[] = { .flags = SPI_NOR_HAS_LOCK, .no_sfdp_flags = SECT_4K, .fixups = &at25fs_nor_fixups + }, { + .id = SNOR_ID(0x1f, 0x87, 0x01), + .name = "at25sf321", + .size = SZ_4M, + .no_sfdp_flags = SECT_4K, }, };
Add entry for the at25sf321 32Mbit SPI flash. This flash is populated on a custom board and was tested at 10MHz frequency using the "ti,da830-spi" SPI controller. Link: https://www.renesas.com/en/document/dst/at25sf321-datasheet?r=1608801 Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> --- root# cat /sys/class/spi_master/spi1/spi1.1/spi-nor/partname at25sf321 root# cat /sys/class/spi_master/spi1/spi1.1/spi-nor/jedec_id 1f8701 root# cat /sys/class/spi_master/spi1/spi1.1/spi-nor/manufacturer atmel root# cat /sys/kernel/debug/spi-nor/spi1.1/capabilities Supported read modes by the flash 1S-1S-1S opcode 0x03 mode cycles 0 dummy cycles 0 1S-1S-1S (fast read) opcode 0x0b mode cycles 0 dummy cycles 8 Supported page program modes by the flash 1S-1S-1S opcode 0x0 root# cat /sys/kernel/debug/spi-nor/spi1.1/params name at25sf321 id 1f 87 01 size 4.00 MiB write size 1 page size 256 address nbytes 3 flags HAS_16BIT_SR opcodes read 0x0b dummy cycles 8 erase 0x20 program 0x02 8D extension none protocols read 1S-1S-1S write 1S-1S-1S register 1S-1S-1S erase commands 20 (4.00 KiB) [0] d8 (64.0 KiB) [1] c7 (4.00 MiB) sector map region (in hex) | erase mask | flags ------------------+------------+---------- 00000000-003fffff | [01 ] | --- Changes in v2: - Change from at25sf321b to at25sf321 - Link to v1: https://lore.kernel.org/r/20241018-spi-nor-v1-1-d725bfb701ec@gmail.com --- drivers/mtd/spi-nor/atmel.c | 5 +++++ 1 file changed, 5 insertions(+) --- base-commit: 200289db261f0c8131a5756133e9d30966289c3b change-id: 20241018-spi-nor-dc29698dea0f Best regards,