| Message ID | 20241029151922.459139-10-kbusch@meta.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | write hints with nvme fdp, scsi streams | expand |
On Tue, Oct 29, 2024 at 08:19:22AM -0700, Keith Busch wrote: > From: Keith Busch <kbusch@kernel.org> > > The block limits exports the number of write hints, so set this limit if > the device reports support for the lifetime hints. Not only does this > inform the user of which hints are possible, it also allows scsi devices > supporting the feature to utilize the full range through raw block > device direct-io. > > Reviewed-by: Bart Van Assche <bvanassche@acm.org> > Reviewed-by: Hannes Reinecke <hare@suse.de> > Signed-off-by: Keith Busch <kbusch@kernel.org> Despite the reviews this is still incorrect. The permanent streams have a relative data temperature associated with them as pointed out last round and are not arbitrary write stream contexts despite (ab)using the SBC streams facilities. Bart, btw: I think the current sd implementation is buggy as well, as it assumes the permanent streams are ordered by their data temperature in the IO Advise hints mode page, but I can't find anything in the spec that requires a particular ordering.
On Tue, Oct 29, 2024 at 04:26:54PM +0100, Christoph Hellwig wrote: > On Tue, Oct 29, 2024 at 08:19:22AM -0700, Keith Busch wrote: > > From: Keith Busch <kbusch@kernel.org> > > > > The block limits exports the number of write hints, so set this limit if > > the device reports support for the lifetime hints. Not only does this > > inform the user of which hints are possible, it also allows scsi devices > > supporting the feature to utilize the full range through raw block > > device direct-io. > > > > Reviewed-by: Bart Van Assche <bvanassche@acm.org> > > Reviewed-by: Hannes Reinecke <hare@suse.de> > > Signed-off-by: Keith Busch <kbusch@kernel.org> > > Despite the reviews this is still incorrect. The permanent streams have > a relative data temperature associated with them as pointed out last > round and are not arbitrary write stream contexts despite (ab)using > the SBC streams facilities. So then don't use it that way? I still don't know what change you're expecting to happen with this feedback. What do you want the kernel to do differently here?
On Tue, Oct 29, 2024 at 09:34:07AM -0600, Keith Busch wrote: > So then don't use it that way? I still don't know what change you're > expecting to happen with this feedback. What do you want the kernel to > do differently here? Same as before: don't expose them as write streams, because they aren't. A big mess in this series going back to the versions before your involvement is that they somehow want to tie up the temperature hints with the stream separation, which just ends up very messy.
On Tue, Oct 29, 2024 at 04:37:02PM +0100, Christoph Hellwig wrote: > On Tue, Oct 29, 2024 at 09:34:07AM -0600, Keith Busch wrote: > > So then don't use it that way? I still don't know what change you're > > expecting to happen with this feedback. What do you want the kernel to > > do differently here? > > Same as before: don't expose them as write streams, because they > aren't. A big mess in this series going back to the versions before > your involvement is that they somehow want to tie up the temperature > hints with the stream separation, which just ends up very messy. They're not exposed as write streams. Patch 7/9 sets the feature if it is a placement id or not, and only nvme sets it, so scsi's attributes are not claiming to be a write stream.
On Tue, Oct 29, 2024 at 09:38:44AM -0600, Keith Busch wrote: > They're not exposed as write streams. Patch 7/9 sets the feature if it > is a placement id or not, and only nvme sets it, so scsi's attributes > are not claiming to be a write stream. So it shows up in sysfs, but: - queue_max_write_hints (which really should be queue_max_write_streams) still picks it up, and from there the statx interface - per-inode fcntl hint that encode a temperature still magically get dumpted into the write streams if they are set. In other words it's a really leaky half-backed abstraction. Let's brainstorm how it could be done better: - the max_write_streams values only set by block devices that actually do support write streams, and not the fire and forget temperature hints. They way this is queried is by having a non-zero value there, not need for an extra flag. - but the struct file (or maybe inode) gets a supported flag, as stream separation needs to be supported by the file system - a separate fcntl is used to set per-inode streams (if you care about that, seem like the bdev use case focusses on per-I/O). In that case we'd probably also need a separate inode field for them, or a somewhat complicated scheme to decide what is stored in the inode field if there is only one. - for block devices bdev/fops.c maps the temperature hints into write streams if write streams are supported, any user that mixes and matches write streams and temperature hints gets what they deserve - this could also be a helper for file systems that want to do the same. Just a quick writeup while I'm on the run, there's probably a hole or two that could be poked into it.
On Tue, Oct 29, 2024 at 04:53:30PM +0100, Christoph Hellwig wrote: > On Tue, Oct 29, 2024 at 09:38:44AM -0600, Keith Busch wrote: > > They're not exposed as write streams. Patch 7/9 sets the feature if it > > is a placement id or not, and only nvme sets it, so scsi's attributes > > are not claiming to be a write stream. > > So it shows up in sysfs, but: > > - queue_max_write_hints (which really should be queue_max_write_streams) > still picks it up, and from there the statx interface > > - per-inode fcntl hint that encode a temperature still magically > get dumpted into the write streams if they are set. > > In other words it's a really leaky half-backed abstraction. Exactly why I asked last time: "who uses it and how do you want them to use it" :) > Let's brainstorm how it could be done better: > > - the max_write_streams values only set by block devices that actually > do support write streams, and not the fire and forget temperature > hints. They way this is queried is by having a non-zero value > there, not need for an extra flag. So we need a completely different attribute for SCSI's permanent write streams? You'd mentioned earlier you were okay with having SCSI be able to utilized per-io raw block write hints. Having multiple things to check for what are all just write classifiers seems unnecessarily complicated. > - but the struct file (or maybe inode) gets a supported flag, as stream > separation needs to be supported by the file system > - a separate fcntl is used to set per-inode streams (if you care about > that, seem like the bdev use case focusses on per-I/O). In that case > we'd probably also need a separate inode field for them, or a somewhat > complicated scheme to decide what is stored in the inode field if there > is only one. No need to create a new fcntl. The people already testing this are successfully using FDP with the existing fcntl hints. Their applications leverage FDP as way to separate files based on expected lifetime. It is how they want to use it and it is working above expectations. > - for block devices bdev/fops.c maps the temperature hints into write > streams if write streams are supported, any user that mixes and > matches write streams and temperature hints gets what they deserve That's fine. This patch series pretty much accomplishes that part. > - this could also be a helper for file systems that want to do the > same. > > Just a quick writeup while I'm on the run, there's probably a hole or > two that could be poked into it.
On 10/29/24 8:26 AM, Christoph Hellwig wrote: > Bart, btw: I think the current sd implementation is buggy as well, as > it assumes the permanent streams are ordered by their data temperature > in the IO Advise hints mode page, but I can't find anything in the > spec that requires a particular ordering. How about modifying sd_read_io_hints() such that permanent stream information is ignored if the order of the RELATIVE LIFETIME information reported by the GET STREAM STATUS command does not match the permanent stream order? Thanks, Bart. diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 41e2dfa2d67d..277035febd82 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3192,7 +3192,12 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) sdkp->DPOFUA = 0; } -static bool sd_is_perm_stream(struct scsi_disk *sdkp, unsigned int stream_id) +/* + * Returns the relative lifetime of a permanent stream. Returns -1 if the + * GET STREAM STATUS command fails or if the stream is not a permanent stream. + */ +static int sd_perm_stream_rel_lifetime(struct scsi_disk *sdkp, + unsigned int stream_id) { u8 cdb[16] = { SERVICE_ACTION_IN_16, SAI_GET_STREAM_STATUS }; struct { @@ -3212,14 +3217,16 @@ static bool sd_is_perm_stream(struct scsi_disk *sdkp, unsigned int stream_id) res = scsi_execute_cmd(sdev, cdb, REQ_OP_DRV_IN, &buf, sizeof(buf), SD_TIMEOUT, sdkp->max_retries, &exec_args); if (res < 0) - return false; + return -1; if (scsi_status_is_check_condition(res) && scsi_sense_valid(&sshdr)) sd_print_sense_hdr(sdkp, &sshdr); if (res) - return false; + return -1; if (get_unaligned_be32(&buf.h.len) < sizeof(struct scsi_stream_status)) - return false; - return buf.h.stream_status[0].perm; + return -1; + if (!buf.h.stream_status[0].perm) + return -1; + return buf.h.stream_status[0].rel_lifetime; } static void sd_read_io_hints(struct scsi_disk *sdkp, unsigned char *buffer) @@ -3247,9 +3254,17 @@ static void sd_read_io_hints(struct scsi_disk *sdkp, unsigned char *buffer) * should assign the lowest numbered stream identifiers to permanent * streams. */ - for (desc = start; desc < end; desc++) - if (!desc->st_enble || !sd_is_perm_stream(sdkp, desc - start)) + int prev_rel_lifetime = -1; + for (desc = start; desc < end; desc++) { + int rel_lifetime; + + if (!desc->st_enble) break; + rel_lifetime = sd_perm_stream_rel_lifetime(sdkp, desc - start); + if (rel_lifetime < 0 || rel_lifetime < prev_rel_lifetime) + break; + prev_rel_lifetime = rel_lifetime; + } permanent_stream_count_old = sdkp->permanent_stream_count; sdkp->permanent_stream_count = desc - start; if (sdkp->rscs && sdkp->permanent_stream_count < 2)
On Tue, Oct 29, 2024 at 10:22:56AM -0600, Keith Busch wrote: > On Tue, Oct 29, 2024 at 04:53:30PM +0100, Christoph Hellwig wrote: > > On Tue, Oct 29, 2024 at 09:38:44AM -0600, Keith Busch wrote: > > > They're not exposed as write streams. Patch 7/9 sets the feature if it > > > is a placement id or not, and only nvme sets it, so scsi's attributes > > > are not claiming to be a write stream. > > > > So it shows up in sysfs, but: > > > > - queue_max_write_hints (which really should be queue_max_write_streams) > > still picks it up, and from there the statx interface > > > > - per-inode fcntl hint that encode a temperature still magically > > get dumpted into the write streams if they are set. > > > > In other words it's a really leaky half-backed abstraction. > > Exactly why I asked last time: "who uses it and how do you want them to > use it" :) For the temperature hints the only public user I known is rocksdb, and that only started working when Hans fixed a brown paperbag bug in the rocksdb code a while ago. Given that f2fs interprets the hints I suspect something in the Android world does as well, maybe Bart knows more. For the separate write streams the usage I want for them is poor mans zones - e.g. write N LBAs sequentially into a separate write streams and then eventually discard them together. This will fit nicely into f2fs and the pending xfs work as well as quite a few userspace storage systems. For that the file system or application needs to query the number of available write streams (and in the bitmap world their numbers of they are distontigous) and the size your can fit into the "reclaim unit" in FDP terms. I've not been bothering you much with the latter as it is an easy retrofit once the I/O path bits lands. > > Let's brainstorm how it could be done better: > > > > - the max_write_streams values only set by block devices that actually > > do support write streams, and not the fire and forget temperature > > hints. They way this is queried is by having a non-zero value > > there, not need for an extra flag. > > So we need a completely different attribute for SCSI's permanent write > streams? You'd mentioned earlier you were okay with having SCSI be able > to utilized per-io raw block write hints. Having multiple things to > check for what are all just write classifiers seems unnecessarily > complicated. I don't think the multiple write streams interface applies to SCSIs write streams, as they enforce a relative temperature, and they don't have the concept of how much you can write into an "reclaim unit". OTOH there isn't much you need to query for them anyway, as the temperature hints have always been defined as pure hints with all up and downsides of that. > No need to create a new fcntl. The people already testing this are > successfully using FDP with the existing fcntl hints. Their applications > leverage FDP as way to separate files based on expected lifetime. It is > how they want to use it and it is working above expectations. FYI, I think it's always fine and easy to map the temperature hits to write streams if that's all the driver offers. It loses a lot of the capapilities, but as long as it doesn't enforce a lower level interface that never exposes more that's fine.
On Tue, Oct 29, 2024 at 10:18:31AM -0700, Bart Van Assche wrote: > On 10/29/24 8:26 AM, Christoph Hellwig wrote: >> Bart, btw: I think the current sd implementation is buggy as well, as >> it assumes the permanent streams are ordered by their data temperature >> in the IO Advise hints mode page, but I can't find anything in the >> spec that requires a particular ordering. > > How about modifying sd_read_io_hints() such that permanent stream > information is ignored if the order of the RELATIVE LIFETIME information > reported by the GET STREAM STATUS command does not match the permanent > stream order? That seems odd as there is nothing implying that they should be ordered. The logic thing to do would be to a little array mapping the linux temperature levels to the streams ids.
On Wed, Oct 30, 2024 at 05:55:26AM +0100, Christoph Hellwig wrote: > On Tue, Oct 29, 2024 at 10:22:56AM -0600, Keith Busch wrote: > > > No need to create a new fcntl. The people already testing this are > > successfully using FDP with the existing fcntl hints. Their applications > > leverage FDP as way to separate files based on expected lifetime. It is > > how they want to use it and it is working above expectations. > > FYI, I think it's always fine and easy to map the temperature hits to > write streams if that's all the driver offers. It loses a lot of the > capapilities, but as long as it doesn't enforce a lower level interface > that never exposes more that's fine. But that's just the v2 from this sequence: https://lore.kernel.org/linux-nvme/20240528150233.55562-1-joshi.k@samsung.com/ If you're okay with it now, then let's just go with that and I'm happy continue iterating on the rest separately.
On Wed, Oct 30, 2024 at 09:41:39AM -0600, Keith Busch wrote: > On Wed, Oct 30, 2024 at 05:55:26AM +0100, Christoph Hellwig wrote: > > On Tue, Oct 29, 2024 at 10:22:56AM -0600, Keith Busch wrote: > > > > > No need to create a new fcntl. The people already testing this are > > > successfully using FDP with the existing fcntl hints. Their applications > > > leverage FDP as way to separate files based on expected lifetime. It is > > > how they want to use it and it is working above expectations. > > > > FYI, I think it's always fine and easy to map the temperature hits to > > write streams if that's all the driver offers. It loses a lot of the > > capapilities, but as long as it doesn't enforce a lower level interface > > that never exposes more that's fine. > > But that's just the v2 from this sequence: > > https://lore.kernel.org/linux-nvme/20240528150233.55562-1-joshi.k@samsung.com/ > > If you're okay with it now, then let's just go with that and I'm happy > continue iterating on the rest separately. That's exactly what I do not want - it takes the temperature hints and force them into the write streams down in the driver with no way to make actually useful use of the stream separation.
On Wed, Oct 30, 2024 at 04:45:56PM +0100, Christoph Hellwig wrote: > On Wed, Oct 30, 2024 at 09:41:39AM -0600, Keith Busch wrote: > > On Wed, Oct 30, 2024 at 05:55:26AM +0100, Christoph Hellwig wrote: > > > On Tue, Oct 29, 2024 at 10:22:56AM -0600, Keith Busch wrote: > > > > > > > No need to create a new fcntl. The people already testing this are > > > > successfully using FDP with the existing fcntl hints. Their applications > > > > leverage FDP as way to separate files based on expected lifetime. It is > > > > how they want to use it and it is working above expectations. > > > > > > FYI, I think it's always fine and easy to map the temperature hits to > > > write streams if that's all the driver offers. It loses a lot of the > > > capapilities, but as long as it doesn't enforce a lower level interface > > > that never exposes more that's fine. > > > > But that's just the v2 from this sequence: > > > > https://lore.kernel.org/linux-nvme/20240528150233.55562-1-joshi.k@samsung.com/ > > > > If you're okay with it now, then let's just go with that and I'm happy > > continue iterating on the rest separately. > > That's exactly what I do not want - it takes the temperature hints > and force them into the write streams down in the driver What??? You said to map the temperature hints to a write stream. The driver offers that here. But you specifically don't want that? I'm so confused. > with no way to make actually useful use of the stream separation. Have you tried it? The people who actually do easily demonstrate it is in fact very useful.
On Wed, Oct 30, 2024 at 09:48:39AM -0600, Keith Busch wrote: > What??? You said to map the temperature hints to a write stream. The > driver offers that here. But you specifically don't want that? I'm so > confused. In bdev/fops.c (or file systems if they want to do that) not down in the driver forced down everyones throat. Which was the whole point of the discussion that we're running in circles here. > > with no way to make actually useful use of the stream separation. > > Have you tried it? The people who actually do easily demonstrate it is > in fact very useful. While I've read the claim multiple times, I've not actually seen any numbers.
On Wed, Oct 30, 2024 at 04:50:52PM +0100, Christoph Hellwig wrote: > On Wed, Oct 30, 2024 at 09:48:39AM -0600, Keith Busch wrote: > > What??? You said to map the temperature hints to a write stream. The > > driver offers that here. But you specifically don't want that? I'm so > > confused. > > In bdev/fops.c (or file systems if they want to do that) not down in the > driver forced down everyones throat. Which was the whole point of the > discussion that we're running in circles here. That makes no sense. A change completely isolated to a driver isn't forcing anything on anyone. It's the upper layers that's forcing this down, whether the driver uses it or not: the hints are already getting to the driver, but the driver currently doesn't use it. Finding a way to use them is not some force to be demonized... > > > with no way to make actually useful use of the stream separation. > > > > Have you tried it? The people who actually do easily demonstrate it is > > in fact very useful. > > While I've read the claim multiple times, I've not actually seen any > numbers. Here's something recent from rocksdb developers running ycsb worklada benchmark. The filesystem used is XFS. It sets temperature hints for different SST levels, which already happens today. The last data point made some minor changes with level-to-hint mapping. Without FDP: WAF: 2.72 IOPS: 1465 READ LAT: 2681us UPDATE LAT: 3115us With FDP (rocksdb unmodified): WAF: 2.26 IOPS: 1473 READ LAT: 2415us UPDATE LAT: 2807us With FDP (with some minor rocksdb changes): WAF: 1.67 IOPS: 1547 READ LAT: 1978us UPDATE LAT: 2267us
On Wed, Oct 30, 2024 at 10:42:59AM -0600, Keith Busch wrote: > On Wed, Oct 30, 2024 at 04:50:52PM +0100, Christoph Hellwig wrote: > > On Wed, Oct 30, 2024 at 09:48:39AM -0600, Keith Busch wrote: > > > What??? You said to map the temperature hints to a write stream. The > > > driver offers that here. But you specifically don't want that? I'm so > > > confused. > > > > In bdev/fops.c (or file systems if they want to do that) not down in the > > driver forced down everyones throat. Which was the whole point of the > > discussion that we're running in circles here. > > That makes no sense. A change completely isolated to a driver isn't > forcing anything on anyone. It's the upper layers that's forcing this > down, whether the driver uses it or not: the hints are already getting > to the driver, but the driver currently doesn't use it. And once it uses by default, taking it away will have someone scream regresion, because we're not taking it away form that super special use case. > Here's something recent from rocksdb developers running ycsb worklada > benchmark. The filesystem used is XFS. Thanks for finally putting something up. > It sets temperature hints for different SST levels, which already > happens today. The last data point made some minor changes with > level-to-hint mapping. Do you have a pointer to the changes? > Without FDP: > > WAF: 2.72 > IOPS: 1465 > READ LAT: 2681us > UPDATE LAT: 3115us > > With FDP (rocksdb unmodified): > > WAF: 2.26 > IOPS: 1473 > READ LAT: 2415us > UPDATE LAT: 2807us > > With FDP (with some minor rocksdb changes): > > WAF: 1.67 > IOPS: 1547 > READ LAT: 1978us > UPDATE LAT: 2267us Compared to the Numbers Hans presented at Plumbers for the Zoned XFS code, which should work just fine with FDP IFF we exposed real write streams, which roughly double read nad wirte IOPS and reduce the WAF to almost 1 this doesn't look too spectacular to be honest, but it sure it something. I just wish we could get the real infraѕtructure instead of some band aid, which makes it really hard to expose the real thing because now it's been taken up and directly wired to a UAPI. one
On 10/29/24 9:55 PM, Christoph Hellwig wrote: > For the temperature hints the only public user I known is rocksdb, and > that only started working when Hans fixed a brown paperbag bug in the > rocksdb code a while ago. Given that f2fs interprets the hints I suspect > something in the Android world does as well, maybe Bart knows more. UFS devices typically have less internal memory (SRAM) than the size of a single zone. Hence, it helps UFS devices if it can be decided at the time a write command is received where to send the data (SRAM, SLC NAND or TLC NAND). This is why UFS vendors asked to provide data lifetime information to zoned logical units. More information about UFS device internals is available in this paper: Hwang, Joo-Young, Seokhwan Kim, Daejun Park, Yong-Gil Song, Junyoung Han, Seunghyun Choi, Sangyeun Cho, and Youjip Won. "{ZMS}: Zone Abstraction for Mobile Flash Storage." In 2024 USENIX Annual Technical Conference (USENIX ATC 24), pp. 173-189. 2024 (https://www.usenix.org/system/files/atc24-hwang.pdf). Bart.
On Wed, Oct 30, 2024 at 05:57:08PM +0100, Christoph Hellwig wrote: > And once it uses by default, taking it away will have someone scream > regresion, because we're not taking it away form that super special > use case. Refusing to allow something because someone might find it useful has got to be the worst reasoning I've heard. :)
On Wed, Oct 30, 2024 at 09:59:24AM -0700, Bart Van Assche wrote: > > On 10/29/24 9:55 PM, Christoph Hellwig wrote: >> For the temperature hints the only public user I known is rocksdb, and >> that only started working when Hans fixed a brown paperbag bug in the >> rocksdb code a while ago. Given that f2fs interprets the hints I suspect >> something in the Android world does as well, maybe Bart knows more. > > UFS devices typically have less internal memory (SRAM) than the size of a > single zone. That wasn't quite the question. Do you know what application in android set the fcntl temperature hints?
On Wed, Oct 30, 2024 at 11:05:03AM -0600, Keith Busch wrote: > On Wed, Oct 30, 2024 at 05:57:08PM +0100, Christoph Hellwig wrote: > > And once it uses by default, taking it away will have someone scream > > regresion, because we're not taking it away form that super special > > use case. > > Refusing to allow something because someone might find it useful has got > to be the worst reasoning I've heard. :) That's not that point. The point is by locking us in we can't actually do the proper thing. And that's what I'm really worried about. Especially with the not all that great numbers in the success story.
On Wed, Oct 30, 2024 at 05:57:08PM +0100, Christoph Hellwig wrote: > > On Wed, Oct 30, 2024 at 04:50:52PM +0100, Christoph Hellwig wrote: > > > It sets temperature hints for different SST levels, which already > > happens today. The last data point made some minor changes with > > level-to-hint mapping. > > Do you have a pointer to the changes? The change moves levels 2 and 3 to "MEDIUM" (along with 0 and 1 already there), 4 to "LONG", and >= 5 remain "EXTREME". WAL continues to be "SHORT", as before. > > Without FDP: > > > > WAF: 2.72 > > IOPS: 1465 > > READ LAT: 2681us > > UPDATE LAT: 3115us > > > > With FDP (rocksdb unmodified): > > > > WAF: 2.26 > > IOPS: 1473 > > READ LAT: 2415us > > UPDATE LAT: 2807us > > > > With FDP (with some minor rocksdb changes): > > > > WAF: 1.67 > > IOPS: 1547 > > READ LAT: 1978us > > UPDATE LAT: 2267us > > Compared to the Numbers Hans presented at Plumbers for the Zoned XFS code, > which should work just fine with FDP IFF we exposed real write streams, > which roughly double read nad wirte IOPS and reduce the WAF to almost > 1 this doesn't look too spectacular to be honest, but it sure it something. > > I just wish we could get the real infraѕtructure instead of some band > aid, which makes it really hard to expose the real thing because now > it's been taken up and directly wired to a UAPI. > one This doesn't have to be the end placement streams development. I fundamentally disagree that this locks anyone in to anything.
On 10/30/24 10:14 AM, Christoph Hellwig wrote: > On Wed, Oct 30, 2024 at 09:59:24AM -0700, Bart Van Assche wrote: >> >> On 10/29/24 9:55 PM, Christoph Hellwig wrote: >>> For the temperature hints the only public user I known is rocksdb, and >>> that only started working when Hans fixed a brown paperbag bug in the >>> rocksdb code a while ago. Given that f2fs interprets the hints I suspect >>> something in the Android world does as well, maybe Bart knows more. >> >> UFS devices typically have less internal memory (SRAM) than the size of a >> single zone. > > That wasn't quite the question. Do you know what application in android > set the fcntl temperature hints? I do not know whether there are any Android apps that use the F_SET_(FILE_|)RW_HINT fcntls. The only use case in Android platform code I know of is this one: Daejun Park, "f2fs-tools: add write hint support", f2fs-dev mailing list, September 2024 (https://lore.kernel.org/all/20240904011217epcms2p5a1b15db8e0ae50884429da7be4af4de4@epcms2p5/T/). As you probably know f2fs-tools is a software package that includes fsck.f2fs. Jaegeuk, please correct me if necessary. Bart.
On Wed, Oct 30, 2024 at 05:57:08PM +0100, Christoph Hellwig wrote: > On Wed, Oct 30, 2024 at 10:42:59AM -0600, Keith Busch wrote: > > With FDP (with some minor rocksdb changes): > > > > WAF: 1.67 > > IOPS: 1547 > > READ LAT: 1978us > > UPDATE LAT: 2267us > > Compared to the Numbers Hans presented at Plumbers for the Zoned XFS code, > which should work just fine with FDP IFF we exposed real write streams, > which roughly double read nad wirte IOPS and reduce the WAF to almost > 1 this doesn't look too spectacular to be honest, but it sure it something. Hold up... I absolutely appreciate the work Hans is and has done. But are you talking about this talk? https://lpc.events/event/18/contributions/1822/attachments/1464/3105/Zoned%20XFS%20LPC%20Zoned%20MC%202024%20V1.pdf That is very much apples-to-oranges. The B+ isn't on the same device being evaluated for WAF, where this has all that mixed in. I think the results are pretty good, all things considered. > I just wish we could get the real infraѕtructure instead of some band > aid, which makes it really hard to expose the real thing because now > it's been taken up and directly wired to a UAPI. > one I don't know what make of this. I think we're talking past each other.
On Wed, Oct 30, 2024 at 11:33 PM Keith Busch <kbusch@kernel.org> wrote: > > On Wed, Oct 30, 2024 at 05:57:08PM +0100, Christoph Hellwig wrote: > > On Wed, Oct 30, 2024 at 10:42:59AM -0600, Keith Busch wrote: > > > With FDP (with some minor rocksdb changes): > > > > > > WAF: 1.67 > > > IOPS: 1547 > > > READ LAT: 1978us > > > UPDATE LAT: 2267us > > > > Compared to the Numbers Hans presented at Plumbers for the Zoned XFS code, > > which should work just fine with FDP IFF we exposed real write streams, > > which roughly double read nad wirte IOPS and reduce the WAF to almost > > 1 this doesn't look too spectacular to be honest, but it sure it something. > > Hold up... I absolutely appreciate the work Hans is and has done. But > are you talking about this talk? > > https://lpc.events/event/18/contributions/1822/attachments/1464/3105/Zoned%20XFS%20LPC%20Zoned%20MC%202024%20V1.pdf > > That is very much apples-to-oranges. The B+ isn't on the same device > being evaluated for WAF, where this has all that mixed in. I think the > results are pretty good, all things considered. No. The meta data IO is just 0.1% of all writes, so that we use a separate device for that in the benchmark really does not matter. Since we can achieve a WAF of ~1 for RocksDB on flash, why should we be content with another 67% of unwanted device side writes on top of that? It's of course impossible to compare your benchmark figures and mine directly since we are using different devices, but hey, we definitely have an opportunity here to make significant gains for FDP if we just provide the right kernel interfaces. Why shouldn't we expose the hardware in a way that enables the users to make the most out of it?
On Thu, Oct 31, 2024 at 09:19:51AM +0100, Hans Holmberg wrote: > No. The meta data IO is just 0.1% of all writes, so that we use a > separate device for that in the benchmark really does not matter. > > Since we can achieve a WAF of ~1 for RocksDB on flash, why should we > be content with another 67% of unwanted device side writes on top of > that? > > It's of course impossible to compare your benchmark figures and mine > directly since we are using different devices, but hey, we definitely > have an opportunity here to make significant gains for FDP if we just > provide the right kernel interfaces. I'll write code to do a 1:1 single device comparism over the weekend and Hans will test it once he is back.
On Thu, Oct 31, 2024 at 09:19:51AM +0100, Hans Holmberg wrote: > On Wed, Oct 30, 2024 at 11:33 PM Keith Busch <kbusch@kernel.org> wrote: > > That is very much apples-to-oranges. The B+ isn't on the same device > > being evaluated for WAF, where this has all that mixed in. I think the > > results are pretty good, all things considered. > > No. The meta data IO is just 0.1% of all writes, so that we use a > separate device for that in the benchmark really does not matter. It's very little spatially, but they overwrite differently than other data, creating many small holes in large erase blocks. > Since we can achieve a WAF of ~1 for RocksDB on flash, why should we > be content with another 67% of unwanted device side writes on top of > that? > > It's of course impossible to compare your benchmark figures and mine > directly since we are using different devices, but hey, we definitely > have an opportunity here to make significant gains for FDP if we just > provide the right kernel interfaces. > > Why shouldn't we expose the hardware in a way that enables the users > to make the most out of it? Because the people using this want this interface. Stalling for the last 6 months hasn't produced anything better, appealing to non-existent vaporware to block something ready-to-go that satisfies a need right now is just wasting everyone's time. Again, I absolutely disagree that this locks anyone in to anything. That's an overly dramatic excuse.
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index ca4bc0ac76adc..235dd6e5b6688 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3768,6 +3768,8 @@ static int sd_revalidate_disk(struct gendisk *disk) sd_config_protection(sdkp, &lim); } + lim.max_write_hints = sdkp->permanent_stream_count; + /* * We now have all cache related info, determine how we deal * with flush requests.