| Message ID | 20241030-sar2130p-dt-v2-1-027364ca0e86@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: add QAR2130P support | expand |
On Wed, 30 Oct 2024 13:50:54 +0200, Dmitry Baryshkov wrote: > Extend the patterns in qcom-soc.yaml to support Qualcomm SAR2130P > platform. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > Documentation/devicetree/bindings/arm/qcom-soc.yaml | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.example.dtb: remoteproc@30000000: compatible: ['qcom,sa8775p-adsp-pas'] is valid under each of {'items': [{'pattern': '^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1}, {'items': [{'pattern': '^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1} from schema $id: http://devicetree.org/schemas/arm/qcom-soc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.example.dtb: clock-controller@100000: compatible: ['qcom,sa8775p-gcc'] is valid under each of {'items': [{'pattern': '^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1}, {'items': [{'pattern': '^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1} from schema $id: http://devicetree.org/schemas/arm/qcom-soc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.example.dtb: phy@8901000: compatible: ['qcom,sa8775p-dwmac-sgmii-phy'] is valid under each of {'items': [{'pattern': '^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1}, {'items': [{'pattern': '^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1} from schema $id: http://devicetree.org/schemas/arm/qcom-soc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.example.dtb: pinctrl@f000000: compatible: ['qcom,sa8775p-tlmm'] is valid under each of {'items': [{'pattern': '^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1}, {'items': [{'pattern': '^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1} from schema $id: http://devicetree.org/schemas/arm/qcom-soc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.example.dtb: interconnect-aggre1-noc: compatible: ['qcom,sa8775p-aggre1-noc'] is valid under each of {'items': [{'pattern': '^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1}, {'items': [{'pattern': '^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$'}], 'type': 'array', 'minItems': 1, 'maxItems': 1} from schema $id: http://devicetree.org/schemas/arm/qcom-soc.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241030-sar2130p-dt-v2-1-027364ca0e86@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Oct 30, 2024 at 01:50:54PM +0200, Dmitry Baryshkov wrote: > Extend the patterns in qcom-soc.yaml to support Qualcomm SAR2130P > platform. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > Documentation/devicetree/bindings/arm/qcom-soc.yaml | 4 ++-- This should be squashed with next patch, adding SAR2130P. It's logically one change: you bring bindings for SA2130P. > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml > index d0751a572af39eecbbd2f8323a6c3c94b3fdeeac..1add7267f541a24e82e0cec62af6f0c839aca267 100644 > --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml > @@ -23,7 +23,7 @@ description: | > select: > properties: > compatible: > - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" > + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+.*$" Instead: s/sa/sar?/ > required: > - compatible > > @@ -31,7 +31,7 @@ properties: > compatible: > oneOf: > # Preferred naming style for compatibles of SoC components: > - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" > + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$" This breaks patterns. p|pro should stay as before. 8775p is below: > - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" so this pattern could cover your sar, e.g. split: "^qcom,sc8[0-9]+[a-z][a-z]-.*$" "^qcom,sar?[0-9]+[a-z]-.*$" Best regards, Krzysztof
On Thu, 31 Oct 2024 at 10:13, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Wed, Oct 30, 2024 at 01:50:54PM +0200, Dmitry Baryshkov wrote: > > Extend the patterns in qcom-soc.yaml to support Qualcomm SAR2130P > > platform. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > Documentation/devicetree/bindings/arm/qcom-soc.yaml | 4 ++-- > > This should be squashed with next patch, adding SAR2130P. It's logically > one change: you bring bindings for SA2130P. > > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml > > index d0751a572af39eecbbd2f8323a6c3c94b3fdeeac..1add7267f541a24e82e0cec62af6f0c839aca267 100644 > > --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml > > +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml > > @@ -23,7 +23,7 @@ description: | > > select: > > properties: > > compatible: > > - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" > > + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+.*$" > > Instead: > s/sa/sar?/ I'd prefer not to do this. I think the patterns are complex enough, so I've redesigned them a bit. I'll send a proposed patchset later today. > > > > required: > > - compatible > > > > @@ -31,7 +31,7 @@ properties: > > compatible: > > oneOf: > > # Preferred naming style for compatibles of SoC components: > > - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" > > + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$" > > This breaks patterns. p|pro should stay as before. 8775p is below: > > > - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" > > so this pattern could cover your sar, e.g. split: > "^qcom,sc8[0-9]+[a-z][a-z]-.*$" > "^qcom,sar?[0-9]+[a-z]-.*$" > > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml index d0751a572af39eecbbd2f8323a6c3c94b3fdeeac..1add7267f541a24e82e0cec62af6f0c839aca267 100644 --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -23,7 +23,7 @@ description: | select: properties: compatible: - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+.*$" required: - compatible @@ -31,7 +31,7 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1e)[0-9]+(p|pro)?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK,
Extend the patterns in qcom-soc.yaml to support Qualcomm SAR2130P platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- Documentation/devicetree/bindings/arm/qcom-soc.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)