diff mbox series

[v2,3/7] usb: typec: Auto enter control for alternate modes

Message ID 20241030142833.v2.3.I439cffc7bf76d94f5850eb85980f1197c4f9154c@changeid (mailing list archive)
State New
Headers show
Series Thunderbolt and DP altmode support for cros-ec-typec | expand

Commit Message

Abhishek Pandit-Subedi Oct. 30, 2024, 9:28 p.m. UTC
Add controls for whether an alternate mode is automatically entered when
a partner connects. The auto_enter control is only available on ports
and applies immediately after a partner connects. The default behavior
is to enable auto enter and drivers must explicitly disable it.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
---

(no changes since v1)

 Documentation/ABI/testing/sysfs-bus-typec |  9 +++++++
 drivers/usb/typec/altmodes/displayport.c  |  6 +++--
 drivers/usb/typec/altmodes/thunderbolt.c  |  3 ++-
 drivers/usb/typec/class.c                 | 31 +++++++++++++++++++++++
 include/linux/usb/typec.h                 |  2 ++
 include/linux/usb/typec_altmode.h         |  2 ++
 6 files changed, 50 insertions(+), 3 deletions(-)

Comments

Heikki Krogerus Oct. 31, 2024, 2:33 p.m. UTC | #1
On Wed, Oct 30, 2024 at 02:28:34PM -0700, Abhishek Pandit-Subedi wrote:
> Add controls for whether an alternate mode is automatically entered when
> a partner connects. The auto_enter control is only available on ports
> and applies immediately after a partner connects. The default behavior
> is to enable auto enter and drivers must explicitly disable it.
> 
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> ---
> 
> (no changes since v1)
> 
>  Documentation/ABI/testing/sysfs-bus-typec |  9 +++++++
>  drivers/usb/typec/altmodes/displayport.c  |  6 +++--
>  drivers/usb/typec/altmodes/thunderbolt.c  |  3 ++-
>  drivers/usb/typec/class.c                 | 31 +++++++++++++++++++++++
>  include/linux/usb/typec.h                 |  2 ++
>  include/linux/usb/typec_altmode.h         |  2 ++
>  6 files changed, 50 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-typec b/Documentation/ABI/testing/sysfs-bus-typec
> index 205d9c91e2e1..f09d05727b82 100644
> --- a/Documentation/ABI/testing/sysfs-bus-typec
> +++ b/Documentation/ABI/testing/sysfs-bus-typec
> @@ -12,6 +12,15 @@ Description:
>  
>  		Valid values are boolean.
>  
> +What:		/sys/bus/typec/devices/.../auto_enter
> +Date:		September 2024
> +Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
> +Description:
> +		Controls whether a mode will be automatically entered when a partner is
> +		connected.
> +
> +		This field is only valid and displayed on a port. Valid values are boolean.

So, why can't this be controlled with the "active" property of the
port altmode instead? That's why it's there.

Sorry if I missed something in v1 related to this question.

thanks,
Abhishek Pandit-Subedi Oct. 31, 2024, 10:48 p.m. UTC | #2
On Thu, Oct 31, 2024 at 7:33 AM Heikki Krogerus
<heikki.krogerus@linux.intel.com> wrote:
>
> On Wed, Oct 30, 2024 at 02:28:34PM -0700, Abhishek Pandit-Subedi wrote:
> > Add controls for whether an alternate mode is automatically entered when
> > a partner connects. The auto_enter control is only available on ports
> > and applies immediately after a partner connects. The default behavior
> > is to enable auto enter and drivers must explicitly disable it.
> >
> > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> > ---
> >
> > (no changes since v1)
> >
> >  Documentation/ABI/testing/sysfs-bus-typec |  9 +++++++
> >  drivers/usb/typec/altmodes/displayport.c  |  6 +++--
> >  drivers/usb/typec/altmodes/thunderbolt.c  |  3 ++-
> >  drivers/usb/typec/class.c                 | 31 +++++++++++++++++++++++
> >  include/linux/usb/typec.h                 |  2 ++
> >  include/linux/usb/typec_altmode.h         |  2 ++
> >  6 files changed, 50 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/ABI/testing/sysfs-bus-typec b/Documentation/ABI/testing/sysfs-bus-typec
> > index 205d9c91e2e1..f09d05727b82 100644
> > --- a/Documentation/ABI/testing/sysfs-bus-typec
> > +++ b/Documentation/ABI/testing/sysfs-bus-typec
> > @@ -12,6 +12,15 @@ Description:
> >
> >               Valid values are boolean.
> >
> > +What:                /sys/bus/typec/devices/.../auto_enter
> > +Date:                September 2024
> > +Contact:     Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > +Description:
> > +             Controls whether a mode will be automatically entered when a partner is
> > +             connected.
> > +
> > +             This field is only valid and displayed on a port. Valid values are boolean.
>
> So, why can't this be controlled with the "active" property of the
> port altmode instead? That's why it's there.
>
> Sorry if I missed something in v1 related to this question.

There was a bit of discussion around this in another patch in v1:
https://patchwork.kernel.org/project/chrome-platform/patch/20240925092505.8.Ic14738918e3d026fa2d85e95fb68f8e07a0828d0@changeid/
And this patch is probably a good place to continue that discussion.

With the way altmodes drivers currently work, they will auto-enter
when probed. So if you have a partner that supports both displayport
and thunderbolt, they will both attempt to auto-enter on probe. I
think I could use the `active` field instead so that the port altmode
blocks entry until userspace enables it -- this would avoid the need
to add one more sysfs ABI. I'll actually go ahead and do this for the
next patch series I send up.

However, the underlying problem I'm trying to solve still exists: how
do you choose a specific altmode to enter if there are multiple to
choose from? I tried to implement a method that first tries USB4 and
then Thunderbolt and then DP but I realized that the altmode drivers
don't necessarily bind immediately after a partner altmode is
registered so I can't just call `activate` (since no ops are attached
to the partner altmode yet). Do you have any thoughts about how to
handle multiple modes as well as how to handle fallback mode entry
(i.e. thunderbolt fails so you try DPAM next)?

>
> thanks,
>
> --
> heikki
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-typec b/Documentation/ABI/testing/sysfs-bus-typec
index 205d9c91e2e1..f09d05727b82 100644
--- a/Documentation/ABI/testing/sysfs-bus-typec
+++ b/Documentation/ABI/testing/sysfs-bus-typec
@@ -12,6 +12,15 @@  Description:
 
 		Valid values are boolean.
 
+What:		/sys/bus/typec/devices/.../auto_enter
+Date:		September 2024
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Controls whether a mode will be automatically entered when a partner is
+		connected.
+
+		This field is only valid and displayed on a port. Valid values are boolean.
+
 What:		/sys/bus/typec/devices/.../description
 Date:		July 2018
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 2f03190a9873..62263f1d3a72 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -767,8 +767,10 @@  int dp_altmode_probe(struct typec_altmode *alt)
 	if (plug)
 		typec_altmode_set_drvdata(plug, dp);
 
-	dp->state = plug ? DP_STATE_ENTER_PRIME : DP_STATE_ENTER;
-	schedule_work(&dp->work);
+	if (port->auto_enter) {
+		dp->state = plug ? DP_STATE_ENTER_PRIME : DP_STATE_ENTER;
+		schedule_work(&dp->work);
+	}
 
 	return 0;
 }
diff --git a/drivers/usb/typec/altmodes/thunderbolt.c b/drivers/usb/typec/altmodes/thunderbolt.c
index 8380b22d26a7..181892bf1225 100644
--- a/drivers/usb/typec/altmodes/thunderbolt.c
+++ b/drivers/usb/typec/altmodes/thunderbolt.c
@@ -212,6 +212,7 @@  static const struct typec_altmode_ops tbt_altmode_ops = {
 
 static int tbt_altmode_probe(struct typec_altmode *alt)
 {
+	const struct typec_altmode *port = typec_altmode_get_partner(alt);
 	struct tbt_altmode *tbt;
 
 	tbt = devm_kzalloc(&alt->dev, sizeof(*tbt), GFP_KERNEL);
@@ -226,7 +227,7 @@  static int tbt_altmode_probe(struct typec_altmode *alt)
 	typec_altmode_set_drvdata(alt, tbt);
 	typec_altmode_set_ops(alt, &tbt_altmode_ops);
 
-	if (tbt_ready(alt)) {
+	if (port->auto_enter && tbt_ready(alt)) {
 		if (tbt->plug[TYPEC_PLUG_SOP_PP])
 			tbt->state = TBT_STATE_SOP_PP_ENTER;
 		else if (tbt->plug[TYPEC_PLUG_SOP_P])
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 85494b9f7502..e74f835c6859 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -403,6 +403,31 @@  static ssize_t active_store(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RW(active);
 
+static ssize_t
+auto_enter_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	return sprintf(buf, "%s\n", alt->auto_enter ? "yes" : "no");
+}
+
+static ssize_t auto_enter_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t size)
+{
+	struct typec_altmode *adev = to_typec_altmode(dev);
+	bool auto_enter;
+	int ret;
+
+	ret = kstrtobool(buf, &auto_enter);
+	if (ret)
+		return ret;
+
+	adev->auto_enter = auto_enter;
+
+	return size;
+}
+static DEVICE_ATTR_RW(auto_enter);
+
 static ssize_t
 supported_roles_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
@@ -446,6 +471,7 @@  static DEVICE_ATTR_RO(svid);
 
 static struct attribute *typec_altmode_attrs[] = {
 	&dev_attr_active.attr,
+	&dev_attr_auto_enter.attr,
 	&dev_attr_mode.attr,
 	&dev_attr_svid.attr,
 	&dev_attr_vdo.attr,
@@ -461,6 +487,10 @@  static umode_t typec_altmode_attr_is_visible(struct kobject *kobj,
 		if (!adev->ops || !adev->ops->activate)
 			return 0444;
 
+	if (attr == &dev_attr_auto_enter.attr)
+		if (!is_typec_port(adev->dev.parent))
+			return 0;
+
 	return attr->mode;
 }
 
@@ -564,6 +594,7 @@  typec_register_altmode(struct device *parent,
 	if (is_port) {
 		alt->attrs[3] = &dev_attr_supported_roles.attr;
 		alt->adev.active = true; /* Enabled by default */
+		alt->adev.auto_enter = !desc->no_auto_enter;
 	}
 
 	sprintf(alt->group_name, "mode%d", desc->mode);
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index d616b8807000..5336b7c92ca4 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -139,6 +139,7 @@  int typec_cable_set_identity(struct typec_cable *cable);
  * @svid: Standard or Vendor ID
  * @mode: Index of the Mode
  * @vdo: VDO returned by Discover Modes USB PD command
+ * @no_auto_enter: Only for ports. Disables auto enter which is default behavior.
  * @roles: Only for ports. DRP if the mode is available in both roles
  *
  * Description of an Alternate Mode which a connector, cable plug or partner
@@ -148,6 +149,7 @@  struct typec_altmode_desc {
 	u16			svid;
 	u8			mode;
 	u32			vdo;
+	bool			no_auto_enter;
 	/* Only used with ports */
 	enum typec_port_data	roles;
 };
diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h
index b3c0866ea70f..ab7c3ebe4926 100644
--- a/include/linux/usb/typec_altmode.h
+++ b/include/linux/usb/typec_altmode.h
@@ -18,6 +18,7 @@  struct typec_altmode_ops;
  * @mode: Index of the Mode
  * @vdo: VDO returned by Discover Modes USB PD command
  * @active: Tells has the mode been entered or not
+ * @auto_enter: Tells whether to auto-enter mode (only valid for port mode).
  * @desc: Optional human readable description of the mode
  * @ops: Operations vector from the driver
  * @cable_ops: Cable operations vector from the driver.
@@ -28,6 +29,7 @@  struct typec_altmode {
 	int				mode;
 	u32				vdo;
 	unsigned int			active:1;
+	unsigned int			auto_enter:1;
 
 	char				*desc;
 	const struct typec_altmode_ops	*ops;