| Message ID | 20241012-gpu-acd-v1-1-1e5e91aa95b6@quicinc.com (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
| Series | Support for GPU ACD feature on Adreno X1-85 | expand |
On 11.10.2024 10:29 PM, Akhil P Oommen wrote: > ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce > the power consumption. In some chipsets, it is also a requirement to > support higher GPU frequencies. This patch adds support for GPU ACD by > sending necessary data to GMU and AOSS. The feature support for the > chipset is detected based on devicetree data. > > Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> > --- [...] > + > + /* Initialize qmp node to talk to AOSS */ > + gmu->qmp = qmp_get(gmu->dev); > + if (IS_ERR(gmu->qmp)) { > + cmd->enable_by_level = 0; > + return dev_err_probe(gmu->dev, PTR_ERR(gmu->qmp), "Failed to initialize qmp\n"); > + } I'm still in favor of keeping qmp_get where it currently is, so that probe can fail/defer faster Konrad
On Mon, Oct 21, 2024 at 11:38:41AM +0200, Konrad Dybcio wrote: > On 11.10.2024 10:29 PM, Akhil P Oommen wrote: > > ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce > > the power consumption. In some chipsets, it is also a requirement to > > support higher GPU frequencies. This patch adds support for GPU ACD by > > sending necessary data to GMU and AOSS. The feature support for the > > chipset is detected based on devicetree data. > > > > Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> > > --- > > [...] > > > + > > + /* Initialize qmp node to talk to AOSS */ > > + gmu->qmp = qmp_get(gmu->dev); > > + if (IS_ERR(gmu->qmp)) { > > + cmd->enable_by_level = 0; > > + return dev_err_probe(gmu->dev, PTR_ERR(gmu->qmp), "Failed to initialize qmp\n"); > > + } > > I'm still in favor of keeping qmp_get where it currently is, so that > probe can fail/defer faster Sorry, I somehow missed this email from you until now. If it fails, then it probably doesn't matter if it is a bit late. But for defer, isn't there some optimizations to track the dependency from devicetree data? I am not entirely sure! Since qmp node is related to ACD, I felt it is better to: 1. Keep all acd probe related code in a single place. 2. Be more opportunistic in skipping qmp_get() wherever possible. But if you still have strong opinion on this, I can move it back in the next revision (v3). -Akhil > > Konrad
On 22.10.2024 12:09 AM, Akhil P Oommen wrote: > On Mon, Oct 21, 2024 at 11:38:41AM +0200, Konrad Dybcio wrote: >> On 11.10.2024 10:29 PM, Akhil P Oommen wrote: >>> ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce >>> the power consumption. In some chipsets, it is also a requirement to >>> support higher GPU frequencies. This patch adds support for GPU ACD by >>> sending necessary data to GMU and AOSS. The feature support for the >>> chipset is detected based on devicetree data. >>> >>> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> >>> --- >> >> [...] >> >>> + >>> + /* Initialize qmp node to talk to AOSS */ >>> + gmu->qmp = qmp_get(gmu->dev); >>> + if (IS_ERR(gmu->qmp)) { >>> + cmd->enable_by_level = 0; >>> + return dev_err_probe(gmu->dev, PTR_ERR(gmu->qmp), "Failed to initialize qmp\n"); >>> + } >> >> I'm still in favor of keeping qmp_get where it currently is, so that >> probe can fail/defer faster > > Sorry, I somehow missed this email from you until now. > > If it fails, then it probably doesn't matter if it is a bit late. But for defer, isn't there > some optimizations to track the dependency from devicetree data? I am > not entirely sure! There's devlink for clocks/supplies etc, it doesn't apply universally for all phandle references IIUC. > > Since qmp node is related to ACD, I felt it is better to: > 1. Keep all acd probe related code in a single place. > 2. Be more opportunistic in skipping qmp_get() wherever possible. > > But if you still have strong opinion on this, I can move it back in the > next revision (v3). I suppose the answer is yes, I have a strong opinion :D Konrad
On 11/10/2024 22:29, Akhil P Oommen wrote: > ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce > the power consumption. In some chipsets, it is also a requirement to > support higher GPU frequencies. This patch adds support for GPU ACD by > sending necessary data to GMU and AOSS. The feature support for the > chipset is detected based on devicetree data. > > Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> > --- > drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 ++++++++++++++++++++++++++++------- > drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + > drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ > drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ > 4 files changed, 124 insertions(+), 15 deletions(-) > <snip> > + > +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) > +{ > + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; > + struct a6xx_hfi_msg_feature_ctrl msg = { > + .feature = HFI_FEATURE_ACD, > + .enable = 1, > + .data = 0, > + }; > + int ret; > + > + if (!acd_table->enable_by_level) > + return 0; > + > + /* Enable ACD feature at GMU */ > + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, sizeof(msg), NULL, 0); > + if (ret) { > + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); > + return ret; > + } > + > + /* Send ACD table to GMU */ > + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), NULL, 0); This looks wrong, in this exact code, you never use the acd_table... perhaps it should be acd_table here > + if (ret) { > + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); > + return ret; > + } > + > + return 0; > +} > + > static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) > { > struct a6xx_hfi_msg_test msg = { 0 }; > @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int boot_state) > if (ret) > return ret; > > + ret = a6xx_hfi_enable_acd(gmu); > + if (ret) > + return ret; > + > ret = a6xx_hfi_send_core_fw_start(gmu); > if (ret) > return ret; > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h > index 528110169398..51864c8ad0e6 100644 > --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h > +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h > @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { > u32 header; > }; > > +#define HFI_H2F_MSG_ACD 7 > +#define MAX_ACD_STRIDE 2 > + > +struct a6xx_hfi_acd_table { > + u32 header; > + u32 version; > + u32 enable_by_level; > + u32 stride; > + u32 num_levels; > + u32 data[16 * MAX_ACD_STRIDE]; > +}; > + > #define HFI_H2F_MSG_START 10 > > struct a6xx_hfi_msg_start { > u32 header; > }; > > +#define HFI_H2F_FEATURE_CTRL 11 > + > +struct a6xx_hfi_msg_feature_ctrl { > + u32 header; > + u32 feature; > + u32 enable; > + u32 data; > +}; > + > #define HFI_H2F_MSG_CORE_FW_START 14 > > struct a6xx_hfi_msg_core_fw_start { > Thanks, Neil
On 11/4/2024 9:14 PM, neil.armstrong@linaro.org wrote: > On 11/10/2024 22:29, Akhil P Oommen wrote: >> ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce >> the power consumption. In some chipsets, it is also a requirement to >> support higher GPU frequencies. This patch adds support for GPU ACD by >> sending necessary data to GMU and AOSS. The feature support for the >> chipset is detected based on devicetree data. >> >> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> >> --- >> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 +++++++++++++++++++++++++ >> +++------- >> drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + >> drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ >> drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ >> 4 files changed, 124 insertions(+), 15 deletions(-) >> > > <snip> > >> + >> +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >> +{ >> + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; >> + struct a6xx_hfi_msg_feature_ctrl msg = { >> + .feature = HFI_FEATURE_ACD, >> + .enable = 1, >> + .data = 0, >> + }; >> + int ret; >> + >> + if (!acd_table->enable_by_level) >> + return 0; >> + >> + /* Enable ACD feature at GMU */ >> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, >> sizeof(msg), NULL, 0); >> + if (ret) { >> + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); >> + return ret; >> + } >> + >> + /* Send ACD table to GMU */ >> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), >> NULL, 0); > > This looks wrong, in this exact code, you never use the acd_table... > perhaps it should be acd_table here Whoops! Weirdly gmu didn't explode when I tested. Thanks for your keen eye. -Akhil. > >> + if (ret) { >> + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) >> { >> struct a6xx_hfi_msg_test msg = { 0 }; >> @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int >> boot_state) >> if (ret) >> return ret; >> + ret = a6xx_hfi_enable_acd(gmu); >> + if (ret) >> + return ret; >> + >> ret = a6xx_hfi_send_core_fw_start(gmu); >> if (ret) >> return ret; >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/ >> msm/adreno/a6xx_hfi.h >> index 528110169398..51864c8ad0e6 100644 >> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >> @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { >> u32 header; >> }; >> +#define HFI_H2F_MSG_ACD 7 >> +#define MAX_ACD_STRIDE 2 >> + >> +struct a6xx_hfi_acd_table { >> + u32 header; >> + u32 version; >> + u32 enable_by_level; >> + u32 stride; >> + u32 num_levels; >> + u32 data[16 * MAX_ACD_STRIDE]; >> +}; >> + >> #define HFI_H2F_MSG_START 10 >> struct a6xx_hfi_msg_start { >> u32 header; >> }; >> +#define HFI_H2F_FEATURE_CTRL 11 >> + >> +struct a6xx_hfi_msg_feature_ctrl { >> + u32 header; >> + u32 feature; >> + u32 enable; >> + u32 data; >> +}; >> + >> #define HFI_H2F_MSG_CORE_FW_START 14 >> struct a6xx_hfi_msg_core_fw_start { >> > > Thanks, > Neil
On 06/11/2024 02:44, Akhil P Oommen wrote: > On 11/4/2024 9:14 PM, neil.armstrong@linaro.org wrote: >> On 11/10/2024 22:29, Akhil P Oommen wrote: >>> ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce >>> the power consumption. In some chipsets, it is also a requirement to >>> support higher GPU frequencies. This patch adds support for GPU ACD by >>> sending necessary data to GMU and AOSS. The feature support for the >>> chipset is detected based on devicetree data. >>> >>> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> >>> --- >>> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 +++++++++++++++++++++++++ >>> +++------- >>> drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + >>> drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ >>> drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ >>> 4 files changed, 124 insertions(+), 15 deletions(-) >>> >> >> <snip> >> >>> + >>> +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >>> +{ >>> + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; >>> + struct a6xx_hfi_msg_feature_ctrl msg = { >>> + .feature = HFI_FEATURE_ACD, >>> + .enable = 1, >>> + .data = 0, >>> + }; >>> + int ret; >>> + >>> + if (!acd_table->enable_by_level) >>> + return 0; >>> + >>> + /* Enable ACD feature at GMU */ >>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, >>> sizeof(msg), NULL, 0); >>> + if (ret) { >>> + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); >>> + return ret; >>> + } >>> + >>> + /* Send ACD table to GMU */ >>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), >>> NULL, 0); >> >> This looks wrong, in this exact code, you never use the acd_table... >> perhaps it should be acd_table here > > Whoops! Weirdly gmu didn't explode when I tested. > > Thanks for your keen eye. You're welcome ! I've been trying to enable this on SM8650, but HFI_H2F_MSG_ACD fails. My changes: ================><================================ diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c index 7c96d6f8aaa9..bd9d586f245e 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c @@ -682,7 +682,7 @@ static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) } /* Send ACD table to GMU */ - ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, sizeof(*acd_table), NULL, 0); + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, sizeof(struct a6xx_hfi_acd_table), NULL, 0); if (ret) { DRM_DEV_ERROR(gmu->dev, "Unable to send ACD table (%d)\n", ret); return ret; ================><================================ with the appropriate qcom,opp-acd-level in DT taken from downstream, I get: [ 6.946184] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Message (null) id 4 timed out waiting for response [ 6.958697] platform 3d6a000.gmu: [drm:a6xx_hfi_start [msm]] *ERROR* Unable to send ACD table (-110) is there something missing ? Neil > > -Akhil. > >> >>> + if (ret) { >>> + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); >>> + return ret; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) >>> { >>> struct a6xx_hfi_msg_test msg = { 0 }; >>> @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int >>> boot_state) >>> if (ret) >>> return ret; >>> + ret = a6xx_hfi_enable_acd(gmu); >>> + if (ret) >>> + return ret; >>> + >>> ret = a6xx_hfi_send_core_fw_start(gmu); >>> if (ret) >>> return ret; >>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/ >>> msm/adreno/a6xx_hfi.h >>> index 528110169398..51864c8ad0e6 100644 >>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>> @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { >>> u32 header; >>> }; >>> +#define HFI_H2F_MSG_ACD 7 >>> +#define MAX_ACD_STRIDE 2 >>> + >>> +struct a6xx_hfi_acd_table { >>> + u32 header; >>> + u32 version; >>> + u32 enable_by_level; >>> + u32 stride; >>> + u32 num_levels; >>> + u32 data[16 * MAX_ACD_STRIDE]; >>> +}; >>> + >>> #define HFI_H2F_MSG_START 10 >>> struct a6xx_hfi_msg_start { >>> u32 header; >>> }; >>> +#define HFI_H2F_FEATURE_CTRL 11 >>> + >>> +struct a6xx_hfi_msg_feature_ctrl { >>> + u32 header; >>> + u32 feature; >>> + u32 enable; >>> + u32 data; >>> +}; >>> + >>> #define HFI_H2F_MSG_CORE_FW_START 14 >>> struct a6xx_hfi_msg_core_fw_start { >>> >> >> Thanks, >> Neil >
On 11/7/2024 2:25 PM, neil.armstrong@linaro.org wrote: > On 06/11/2024 02:44, Akhil P Oommen wrote: >> On 11/4/2024 9:14 PM, neil.armstrong@linaro.org wrote: >>> On 11/10/2024 22:29, Akhil P Oommen wrote: >>>> ACD a.k.a Adaptive Clock Distribution is a feature which helps to >>>> reduce >>>> the power consumption. In some chipsets, it is also a requirement to >>>> support higher GPU frequencies. This patch adds support for GPU ACD by >>>> sending necessary data to GMU and AOSS. The feature support for the >>>> chipset is detected based on devicetree data. >>>> >>>> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> >>>> --- >>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 +++++++++++++++++++++++++ >>>> +++------- >>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + >>>> drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ >>>> drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ >>>> 4 files changed, 124 insertions(+), 15 deletions(-) >>>> >>> >>> <snip> >>> >>>> + >>>> +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >>>> +{ >>>> + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; >>>> + struct a6xx_hfi_msg_feature_ctrl msg = { >>>> + .feature = HFI_FEATURE_ACD, >>>> + .enable = 1, >>>> + .data = 0, >>>> + }; >>>> + int ret; >>>> + >>>> + if (!acd_table->enable_by_level) >>>> + return 0; >>>> + >>>> + /* Enable ACD feature at GMU */ >>>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, >>>> sizeof(msg), NULL, 0); >>>> + if (ret) { >>>> + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); >>>> + return ret; >>>> + } >>>> + >>>> + /* Send ACD table to GMU */ >>>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), >>>> NULL, 0); >>> >>> This looks wrong, in this exact code, you never use the acd_table... >>> perhaps it should be acd_table here >> >> Whoops! Weirdly gmu didn't explode when I tested. >> >> Thanks for your keen eye. > > You're welcome ! > > I've been trying to enable this on SM8650, but HFI_H2F_MSG_ACD fails. > > My changes: > ================><================================ > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/ > msm/adreno/a6xx_hfi.c > index 7c96d6f8aaa9..bd9d586f245e 100644 > --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c > +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c > @@ -682,7 +682,7 @@ static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) > } > > /* Send ACD table to GMU */ > - ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, > sizeof(*acd_table), NULL, 0); > + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, &acd_table -> acd_table here? -Akhil > sizeof(struct a6xx_hfi_acd_table), NULL, 0); > if (ret) { > DRM_DEV_ERROR(gmu->dev, "Unable to send ACD table > (%d)\n", ret); > return ret; > ================><================================ > > with the appropriate qcom,opp-acd-level in DT taken from downstream, I get: > [ 6.946184] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 > [msm]] *ERROR* Message (null) id 4 timed out waiting for response > [ 6.958697] platform 3d6a000.gmu: [drm:a6xx_hfi_start [msm]] *ERROR* > Unable to send ACD table (-110) > > is there something missing ? > > Neil > >> >> -Akhil. >> >>> >>>> + if (ret) { >>>> + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); >>>> + return ret; >>>> + } >>>> + >>>> + return 0; >>>> +} >>>> + >>>> static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) >>>> { >>>> struct a6xx_hfi_msg_test msg = { 0 }; >>>> @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int >>>> boot_state) >>>> if (ret) >>>> return ret; >>>> + ret = a6xx_hfi_enable_acd(gmu); >>>> + if (ret) >>>> + return ret; >>>> + >>>> ret = a6xx_hfi_send_core_fw_start(gmu); >>>> if (ret) >>>> return ret; >>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/ >>>> msm/adreno/a6xx_hfi.h >>>> index 528110169398..51864c8ad0e6 100644 >>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>>> @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { >>>> u32 header; >>>> }; >>>> +#define HFI_H2F_MSG_ACD 7 >>>> +#define MAX_ACD_STRIDE 2 >>>> + >>>> +struct a6xx_hfi_acd_table { >>>> + u32 header; >>>> + u32 version; >>>> + u32 enable_by_level; >>>> + u32 stride; >>>> + u32 num_levels; >>>> + u32 data[16 * MAX_ACD_STRIDE]; >>>> +}; >>>> + >>>> #define HFI_H2F_MSG_START 10 >>>> struct a6xx_hfi_msg_start { >>>> u32 header; >>>> }; >>>> +#define HFI_H2F_FEATURE_CTRL 11 >>>> + >>>> +struct a6xx_hfi_msg_feature_ctrl { >>>> + u32 header; >>>> + u32 feature; >>>> + u32 enable; >>>> + u32 data; >>>> +}; >>>> + >>>> #define HFI_H2F_MSG_CORE_FW_START 14 >>>> struct a6xx_hfi_msg_core_fw_start { >>>> >>> >>> Thanks, >>> Neil >> >
On 07/11/2024 13:46, Akhil P Oommen wrote: > On 11/7/2024 2:25 PM, neil.armstrong@linaro.org wrote: >> On 06/11/2024 02:44, Akhil P Oommen wrote: >>> On 11/4/2024 9:14 PM, neil.armstrong@linaro.org wrote: >>>> On 11/10/2024 22:29, Akhil P Oommen wrote: >>>>> ACD a.k.a Adaptive Clock Distribution is a feature which helps to >>>>> reduce >>>>> the power consumption. In some chipsets, it is also a requirement to >>>>> support higher GPU frequencies. This patch adds support for GPU ACD by >>>>> sending necessary data to GMU and AOSS. The feature support for the >>>>> chipset is detected based on devicetree data. >>>>> >>>>> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> >>>>> --- >>>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 +++++++++++++++++++++++++ >>>>> +++------- >>>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + >>>>> drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ >>>>> drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ >>>>> 4 files changed, 124 insertions(+), 15 deletions(-) >>>>> >>>> >>>> <snip> >>>> >>>>> + >>>>> +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >>>>> +{ >>>>> + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; >>>>> + struct a6xx_hfi_msg_feature_ctrl msg = { >>>>> + .feature = HFI_FEATURE_ACD, >>>>> + .enable = 1, >>>>> + .data = 0, >>>>> + }; >>>>> + int ret; >>>>> + >>>>> + if (!acd_table->enable_by_level) >>>>> + return 0; >>>>> + >>>>> + /* Enable ACD feature at GMU */ >>>>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, >>>>> sizeof(msg), NULL, 0); >>>>> + if (ret) { >>>>> + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + /* Send ACD table to GMU */ >>>>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), >>>>> NULL, 0); >>>> >>>> This looks wrong, in this exact code, you never use the acd_table... >>>> perhaps it should be acd_table here >>> >>> Whoops! Weirdly gmu didn't explode when I tested. >>> >>> Thanks for your keen eye. >> >> You're welcome ! >> >> I've been trying to enable this on SM8650, but HFI_H2F_MSG_ACD fails. >> >> My changes: >> ================><================================ >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/ >> msm/adreno/a6xx_hfi.c >> index 7c96d6f8aaa9..bd9d586f245e 100644 >> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c >> @@ -682,7 +682,7 @@ static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >> } >> >> /* Send ACD table to GMU */ >> - ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, >> sizeof(*acd_table), NULL, 0); >> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, > > &acd_table -> acd_table here? Damn, good catch ! Ok so it didn't explode anymore, but still fails: ===== [ 7.083258] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Message HFI_H2F_MSG_GX_BW_PERF_VOTE id 7 timed out waiting for response [ 7.149709] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Unexpected message id 7 on the response queue [ 7.149744] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* The HFI response queue is unexpectedly empty [ 7.165163] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Unexpected message id 8 on the response queue [ 7.165188] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* The HFI response queue is unexpectedly empty ==== Seems with ACD enabled, first vote can take up to 100ms, and downstream has 1s timeout, with a larger timeout I got it to work ! Thanks, Neil > > -Akhil > >> sizeof(struct a6xx_hfi_acd_table), NULL, 0); >> if (ret) { >> DRM_DEV_ERROR(gmu->dev, "Unable to send ACD table >> (%d)\n", ret); >> return ret; >> ================><================================ >> >> with the appropriate qcom,opp-acd-level in DT taken from downstream, I get: >> [ 6.946184] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 >> [msm]] *ERROR* Message (null) id 4 timed out waiting for response >> [ 6.958697] platform 3d6a000.gmu: [drm:a6xx_hfi_start [msm]] *ERROR* >> Unable to send ACD table (-110) >> >> is there something missing ? >> >> Neil >> >>> >>> -Akhil. >>> >>>> >>>>> + if (ret) { >>>>> + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) >>>>> { >>>>> struct a6xx_hfi_msg_test msg = { 0 }; >>>>> @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int >>>>> boot_state) >>>>> if (ret) >>>>> return ret; >>>>> + ret = a6xx_hfi_enable_acd(gmu); >>>>> + if (ret) >>>>> + return ret; >>>>> + >>>>> ret = a6xx_hfi_send_core_fw_start(gmu); >>>>> if (ret) >>>>> return ret; >>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/ >>>>> msm/adreno/a6xx_hfi.h >>>>> index 528110169398..51864c8ad0e6 100644 >>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>>>> @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { >>>>> u32 header; >>>>> }; >>>>> +#define HFI_H2F_MSG_ACD 7 >>>>> +#define MAX_ACD_STRIDE 2 >>>>> + >>>>> +struct a6xx_hfi_acd_table { >>>>> + u32 header; >>>>> + u32 version; >>>>> + u32 enable_by_level; >>>>> + u32 stride; >>>>> + u32 num_levels; >>>>> + u32 data[16 * MAX_ACD_STRIDE]; >>>>> +}; >>>>> + >>>>> #define HFI_H2F_MSG_START 10 >>>>> struct a6xx_hfi_msg_start { >>>>> u32 header; >>>>> }; >>>>> +#define HFI_H2F_FEATURE_CTRL 11 >>>>> + >>>>> +struct a6xx_hfi_msg_feature_ctrl { >>>>> + u32 header; >>>>> + u32 feature; >>>>> + u32 enable; >>>>> + u32 data; >>>>> +}; >>>>> + >>>>> #define HFI_H2F_MSG_CORE_FW_START 14 >>>>> struct a6xx_hfi_msg_core_fw_start { >>>>> >>>> >>>> Thanks, >>>> Neil >>> >> >
On 11/7/2024 8:01 PM, neil.armstrong@linaro.org wrote: > On 07/11/2024 13:46, Akhil P Oommen wrote: >> On 11/7/2024 2:25 PM, neil.armstrong@linaro.org wrote: >>> On 06/11/2024 02:44, Akhil P Oommen wrote: >>>> On 11/4/2024 9:14 PM, neil.armstrong@linaro.org wrote: >>>>> On 11/10/2024 22:29, Akhil P Oommen wrote: >>>>>> ACD a.k.a Adaptive Clock Distribution is a feature which helps to >>>>>> reduce >>>>>> the power consumption. In some chipsets, it is also a requirement to >>>>>> support higher GPU frequencies. This patch adds support for GPU >>>>>> ACD by >>>>>> sending necessary data to GMU and AOSS. The feature support for the >>>>>> chipset is detected based on devicetree data. >>>>>> >>>>>> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> >>>>>> --- >>>>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 +++++++++++++++++++ >>>>>> ++++++ >>>>>> +++------- >>>>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + >>>>>> drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ >>>>>> drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ >>>>>> 4 files changed, 124 insertions(+), 15 deletions(-) >>>>>> >>>>> >>>>> <snip> >>>>> >>>>>> + >>>>>> +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >>>>>> +{ >>>>>> + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; >>>>>> + struct a6xx_hfi_msg_feature_ctrl msg = { >>>>>> + .feature = HFI_FEATURE_ACD, >>>>>> + .enable = 1, >>>>>> + .data = 0, >>>>>> + }; >>>>>> + int ret; >>>>>> + >>>>>> + if (!acd_table->enable_by_level) >>>>>> + return 0; >>>>>> + >>>>>> + /* Enable ACD feature at GMU */ >>>>>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, >>>>>> sizeof(msg), NULL, 0); >>>>>> + if (ret) { >>>>>> + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); >>>>>> + return ret; >>>>>> + } >>>>>> + >>>>>> + /* Send ACD table to GMU */ >>>>>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), >>>>>> NULL, 0); >>>>> >>>>> This looks wrong, in this exact code, you never use the acd_table... >>>>> perhaps it should be acd_table here >>>> >>>> Whoops! Weirdly gmu didn't explode when I tested. >>>> >>>> Thanks for your keen eye. >>> >>> You're welcome ! >>> >>> I've been trying to enable this on SM8650, but HFI_H2F_MSG_ACD fails. >>> >>> My changes: >>> ================><================================ >>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/ >>> msm/adreno/a6xx_hfi.c >>> index 7c96d6f8aaa9..bd9d586f245e 100644 >>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c >>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c >>> @@ -682,7 +682,7 @@ static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) >>> } >>> >>> /* Send ACD table to GMU */ >>> - ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, >>> sizeof(*acd_table), NULL, 0); >>> + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, >> >> &acd_table -> acd_table here? > > Damn, good catch ! > > Ok so it didn't explode anymore, but still fails: > ===== > [ 7.083258] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 > [msm]] *ERROR* Message HFI_H2F_MSG_GX_BW_PERF_VOTE id 7 timed out > waiting for response > [ 7.149709] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 > [msm]] *ERROR* Unexpected message id 7 on the response queue > [ 7.149744] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 > [msm]] *ERROR* The HFI response queue is unexpectedly empty > [ 7.165163] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 > [msm]] *ERROR* Unexpected message id 8 on the response queue > [ 7.165188] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 > [msm]] *ERROR* The HFI response queue is unexpectedly empty > ==== > > Seems with ACD enabled, first vote can take up to 100ms, and downstream > has 1s timeout, with a larger timeout I got it to work ! Yes, there is an additional overhead during first perf vote. Thanks for the heads up. I am yet to test with fixes. -Akhil. > > Thanks, > Neil >> >> -Akhil >> >>> sizeof(struct a6xx_hfi_acd_table), NULL, 0); >>> if (ret) { >>> DRM_DEV_ERROR(gmu->dev, "Unable to send ACD table >>> (%d)\n", ret); >>> return ret; >>> ================><================================ >>> >>> with the appropriate qcom,opp-acd-level in DT taken from downstream, >>> I get: >>> [ 6.946184] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 >>> [msm]] *ERROR* Message (null) id 4 timed out waiting for response >>> [ 6.958697] platform 3d6a000.gmu: [drm:a6xx_hfi_start [msm]] *ERROR* >>> Unable to send ACD table (-110) >>> >>> is there something missing ? >>> >>> Neil >>> >>>> >>>> -Akhil. >>>> >>>>> >>>>>> + if (ret) { >>>>>> + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); >>>>>> + return ret; >>>>>> + } >>>>>> + >>>>>> + return 0; >>>>>> +} >>>>>> + >>>>>> static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) >>>>>> { >>>>>> struct a6xx_hfi_msg_test msg = { 0 }; >>>>>> @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int >>>>>> boot_state) >>>>>> if (ret) >>>>>> return ret; >>>>>> + ret = a6xx_hfi_enable_acd(gmu); >>>>>> + if (ret) >>>>>> + return ret; >>>>>> + >>>>>> ret = a6xx_hfi_send_core_fw_start(gmu); >>>>>> if (ret) >>>>>> return ret; >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/ >>>>>> msm/adreno/a6xx_hfi.h >>>>>> index 528110169398..51864c8ad0e6 100644 >>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h >>>>>> @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { >>>>>> u32 header; >>>>>> }; >>>>>> +#define HFI_H2F_MSG_ACD 7 >>>>>> +#define MAX_ACD_STRIDE 2 >>>>>> + >>>>>> +struct a6xx_hfi_acd_table { >>>>>> + u32 header; >>>>>> + u32 version; >>>>>> + u32 enable_by_level; >>>>>> + u32 stride; >>>>>> + u32 num_levels; >>>>>> + u32 data[16 * MAX_ACD_STRIDE]; >>>>>> +}; >>>>>> + >>>>>> #define HFI_H2F_MSG_START 10 >>>>>> struct a6xx_hfi_msg_start { >>>>>> u32 header; >>>>>> }; >>>>>> +#define HFI_H2F_FEATURE_CTRL 11 >>>>>> + >>>>>> +struct a6xx_hfi_msg_feature_ctrl { >>>>>> + u32 header; >>>>>> + u32 feature; >>>>>> + u32 enable; >>>>>> + u32 data; >>>>>> +}; >>>>>> + >>>>>> #define HFI_H2F_MSG_CORE_FW_START 14 >>>>>> struct a6xx_hfi_msg_core_fw_start { >>>>>> >>>>> >>>>> Thanks, >>>>> Neil >>>> >>> >> >
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c index 37927bdd6fbe..09fb3f397dbb 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -1021,14 +1021,6 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu) gmu->hung = false; - /* Notify AOSS about the ACD state (unimplemented for now => disable it) */ - if (!IS_ERR(gmu->qmp)) { - ret = qmp_send(gmu->qmp, "{class: gpu, res: acd, val: %d}", - 0 /* Hardcode ACD to be disabled for now */); - if (ret) - dev_err(gmu->dev, "failed to send GPU ACD state\n"); - } - /* Turn on the resources */ pm_runtime_get_sync(gmu->dev); @@ -1476,6 +1468,64 @@ static int a6xx_gmu_pwrlevels_probe(struct a6xx_gmu *gmu) return a6xx_gmu_rpmh_votes_init(gmu); } +static int a6xx_gmu_acd_probe(struct a6xx_gmu *gmu) +{ + struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu); + struct a6xx_hfi_acd_table *cmd = &gmu->acd_table; + struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; + struct msm_gpu *gpu = &adreno_gpu->base; + int ret, i, cmd_idx = 0; + + cmd->version = 1; + cmd->stride = 1; + cmd->enable_by_level = 0; + + /* Skip freq = 0 and parse acd-level for rest of the OPPs */ + for (i = 1; i < gmu->nr_gpu_freqs; i++) { + struct dev_pm_opp *opp; + struct device_node *np; + unsigned long freq; + u32 val; + + freq = gmu->gpu_freqs[i]; + opp = dev_pm_opp_find_freq_exact(&gpu->pdev->dev, freq, true); + np = dev_pm_opp_get_of_node(opp); + + ret = of_property_read_u32(np, "qcom,opp-acd-level", &val); + of_node_put(np); + dev_pm_opp_put(opp); + if (ret == -EINVAL) + continue; + else if (ret) { + DRM_DEV_ERROR(gmu->dev, "Unable to read acd level for freq %lu\n", freq); + return ret; + } + + cmd->enable_by_level |= BIT(i); + cmd->data[cmd_idx++] = val; + } + + cmd->num_levels = cmd_idx; + + /* We are done here if ACD is not required for any of the OPPs */ + if (!cmd->enable_by_level) + return 0; + + /* Initialize qmp node to talk to AOSS */ + gmu->qmp = qmp_get(gmu->dev); + if (IS_ERR(gmu->qmp)) { + cmd->enable_by_level = 0; + return dev_err_probe(gmu->dev, PTR_ERR(gmu->qmp), "Failed to initialize qmp\n"); + } + + /* Notify AOSS about the ACD state */ + ret = qmp_send(gmu->qmp, "{class: gpu, res: acd, val: %d}", 1); + if (ret) + DRM_DEV_ERROR(gmu->dev, "failed to send GPU ACD state\n"); + + return 0; +} + static int a6xx_gmu_clocks_probe(struct a6xx_gmu *gmu) { int ret = devm_clk_bulk_get_all(gmu->dev, &gmu->clocks); @@ -1792,12 +1842,6 @@ int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node) goto detach_cxpd; } - gmu->qmp = qmp_get(gmu->dev); - if (IS_ERR(gmu->qmp) && adreno_is_a7xx(adreno_gpu)) { - ret = PTR_ERR(gmu->qmp); - goto remove_device_link; - } - init_completion(&gmu->pd_gate); complete_all(&gmu->pd_gate); gmu->pd_nb.notifier_call = cxpd_notifier_cb; @@ -1811,6 +1855,10 @@ int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node) /* Get the power levels for the GMU and GPU */ a6xx_gmu_pwrlevels_probe(gmu); + ret = a6xx_gmu_acd_probe(gmu); + if (ret) + goto detach_gxpd; + /* Set up the HFI queues */ a6xx_hfi_init(gmu); @@ -1821,7 +1869,10 @@ int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node) return 0; -remove_device_link: +detach_gxpd: + if (!IS_ERR_OR_NULL(gmu->gxpd)) + dev_pm_domain_detach(gmu->gxpd, false); + device_link_del(link); detach_cxpd: diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h index 94b6c5cab6f4..2690511149ed 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h @@ -81,6 +81,7 @@ struct a6xx_gmu { int nr_gpu_freqs; unsigned long gpu_freqs[16]; u32 gx_arc_votes[16]; + struct a6xx_hfi_acd_table acd_table; int nr_gmu_freqs; unsigned long gmu_freqs[4]; diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c index cdb3f6e74d3e..af94e339188b 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c @@ -659,6 +659,38 @@ static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu) NULL, 0); } +#define HFI_FEATURE_ACD 12 + +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu) +{ + struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table; + struct a6xx_hfi_msg_feature_ctrl msg = { + .feature = HFI_FEATURE_ACD, + .enable = 1, + .data = 0, + }; + int ret; + + if (!acd_table->enable_by_level) + return 0; + + /* Enable ACD feature at GMU */ + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg, sizeof(msg), NULL, 0); + if (ret) { + DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret); + return ret; + } + + /* Send ACD table to GMU */ + ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg), NULL, 0); + if (ret) { + DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret); + return ret; + } + + return 0; +} + static int a6xx_hfi_send_test(struct a6xx_gmu *gmu) { struct a6xx_hfi_msg_test msg = { 0 }; @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int boot_state) if (ret) return ret; + ret = a6xx_hfi_enable_acd(gmu); + if (ret) + return ret; + ret = a6xx_hfi_send_core_fw_start(gmu); if (ret) return ret; diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h index 528110169398..51864c8ad0e6 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test { u32 header; }; +#define HFI_H2F_MSG_ACD 7 +#define MAX_ACD_STRIDE 2 + +struct a6xx_hfi_acd_table { + u32 header; + u32 version; + u32 enable_by_level; + u32 stride; + u32 num_levels; + u32 data[16 * MAX_ACD_STRIDE]; +}; + #define HFI_H2F_MSG_START 10 struct a6xx_hfi_msg_start { u32 header; }; +#define HFI_H2F_FEATURE_CTRL 11 + +struct a6xx_hfi_msg_feature_ctrl { + u32 header; + u32 feature; + u32 enable; + u32 data; +}; + #define HFI_H2F_MSG_CORE_FW_START 14 struct a6xx_hfi_msg_core_fw_start {
ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce the power consumption. In some chipsets, it is also a requirement to support higher GPU frequencies. This patch adds support for GPU ACD by sending necessary data to GMU and AOSS. The feature support for the chipset is detected based on devicetree data. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> --- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 ++++++++++++++++++++++++++++------- drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 1 + drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++ drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++ 4 files changed, 124 insertions(+), 15 deletions(-)